Direct electrochemistry and electrocatalysis with horseradish peroxidase in Eastman AQ films

Nanostructures in Hydrogen Peroxide Sensing

In recent years, several devices have been developed for the direct measurement of hydrogen peroxide (H2O2), a key compound in biological processes and an important chemical reagent in industrial applications. Classical enzymatic biosensors for H2O2 have been recently outclassed by electrochemical sensors that take advantage of material properties in the nano range. Electrodes with metal nanoparticles (NPs) such as Pt, Au, Pd and Ag have been widely used, often in combination with organic and inorganic molecules to improve the sensing capabilities. In this review, we present an overview of nanomaterials, molecules, polymers, and transduction methods used in the optimization of electrochemical sensors for H2O2 sensing. The different devices are compared on the basis of the sensitivity values, the limit of detection (LOD) and the linear range of application reported in the literature. The review aims to provide an overview of the advantages associated with different nanostructures to assess which one best suits a target application.

Nanocrystals of platinum-group metals as peroxidase mimics for in vitro diagnostics

Peroxidase mimics of nanoscale materials as alternatives to natural peroxidases have found widespread uses in biomedicine. Among various types of peroxidase mimics, platinum-group metal (PGM) nanocrystals have drawn considerable attention in recent years due to their superior properties. Particularly, PGM nanocrystals display high catalytic efficiencies, allow for facile surface modifications, and possess excellent stabilities. This feature article summarizes our recent work on development of PGM nanocrystals as peroxidase mimics and exploration of their applications in in vitro diagnostics. We begin with a brief introduction to controlled synthesis of PGM nanocrystals in solution phase. We then elaborate on a variety of physicochemical parameters that can be carefully tuned to optimize the peroxidase-like properties of PGM nanocrystals. Then, we highlight the applications of PGM nanocrystals in different in vitro diagnostic platforms. We conclude this article with personal perspectives on future research directions in this emerging field, where challenges and opportunities are remarked.

Adsorbing surface strongly influences the pseudoperoxidase and nitrite reductase activity of electrode-bound yeast cytochrome c. The effect of hydrophobic immobilization

The Met80Ala and Met80Ala/Tyr67Ala variants of S. cerevisiae iso-1 cytochrome c (ycc) and their adducts with cardiolipin immobilized onto a gold electrode coated with a hydrophobic self-assembled monolayer (SAM) of decane-1-thiol were studied through cyclic voltammetry and surface-enhanced resonance Raman spectroscopy (SERRS). The electroactive species - containing a six-coordinate His/His axially ligated heme and a five-coordinate His/- heme stable in the oxidized and reduced state, respectively - and the pseudoperoxidase activity match those found previously for the wt species and are only slightly affected by CL binding. Most importantly, the reduced His/- ligated form of these variants is able to catalytically reduce the nitrite ion, while electrode-immobilized wt ycc and other His/Met heme ligated variants under a variety of conditions are not. Besides the pseudoperoxidase and nitrite reductase functions, which are the most physiologically relevant abilities of these constructs, also axial heme ligation and the equilibria between conformers are strongly affected by the nature - hydrophobic vs. electrostatic - of the non-covalent interactions determining protein immobilization. Also affected are the catalytic activity changes induced by a given mutation as well as those due to partial unfolding due to CL binding. It follows that under the same solution conditions the structural and functional properties of immobilized ycc are surface-specific and therefore cannot be transferred from an immobilized system to another involving different interfacial protein-SAM interactions.

Electroactive Film of Myoglobin Incorporated in a 3D-porous Calcium Alginate Film with Polyvinyl Alcohol, Glycerin and Gelatin

In this work, an electroactive porous Mb-CA's composite film was fabricated by incorporating myoglobin (Mb) in a three-dimension (3D) porous calcium alginate (CA) film with polyvinyl alcohol, glycerol, and gelatin. The porous Mb-CA's film modified electrodes exhibited a pair of well-defined, quasi-reversible cyclic voltammetric (CV) peaks at about -0.37 V vs. SCE in pH 7.0 buffers, characteristic of Mb heme Fe((III))/Fe((II)) redox couples. The electrochemical parameters, such as formal potentials (E(o')) and apparent heterogeneous electron-transfer rate constants (ks), were estimated by square-wave voltammetry with nonlinear regression analysis. The porous CA's composite film could form hydrogel in aqueous solution. The positions of the Soret absorbance band suggest that Mb in the CA's composite film kept its native states in the medium pH range. Hydrogen peroxide, oxygen, and nitrite were electrochemically catalyzed by the Mb-CA's composite film with significant lowering of the reduction overpotential.

Microbial catalysis of the oxygen reduction reaction for microbial fuel cells: a review

The slow kinetics of the electrochemical oxygen reduction reaction (ORR) is a crucial bottleneck in the development of microbial fuel cells (MFCs). This article firstly gives an overview of the particular constraints imposed on ORR by MFC operating conditions: neutral pH, slow oxygen mass transfer, sensitivity to reactive oxygen species, fouling and biofouling. A review of the literature is then proposed to assess how microbial catalysis could afford suitable solutions. Actually, microbial catalysis of ORR occurs spontaneously on the surface of metallic materials and is an effective motor of microbial corrosion. In this framework, several mechanisms have been proposed, which are reviewed in the second part of the article. The last part describes the efforts made in the domain of MFCs to determine the microbial ecology of electroactive biofilms and define efficient protocols for the formation of microbial oxygen-reducing cathodes. Although no clear mechanism has been established yet, several promising solutions have been recently proposed.

Myoglobin within graphene oxide sheets and Nafion composite films as highly sensitive biosensor

A highly sensitive biosensor was fabricated by incorporating myoglobin (Mb) within graphene oxide (GO) sheets and Nafion composite films. The stable composite Mb-GO-Nafion films were characterized by electrochemistry, scanning electron microscopy, Fourier transform infrared spectroscopy and UV-vis spectroscopy. It was found that Mb in Mb-GO-Nafion films retained its secondary structure similar to its native states. Cyclic voltammetry of Mb-GO-Nafion films showed a pair of well defined, quasi-reversible peaks at about -0.312 V vs saturated calomel electrode (SCE) at pH 5.5, corresponding to direct electron transfer (DET) between Mb and the glassy carbon electrode. Electrochemical parameter of Mb in Mb-GO-Nafion film such as apparent heterogeneous electron transfer rate constant (k_s) and formal potential (E^o') were obtained. The dependence of E^o' on solution pH indicated that the DET reaction of Mb was coupled with proton transfer. Mb in the films displayed good electrocatalytic activities towards various substrates such as hydrogen peroxide, nitrite and oxygen, indicating that the composite films have potential applications in fabricating novel biosensors without using mediators.

Evidence of enzymatic catalysis of oxygen reduction on stainless steels under marine biofilm

Cathodic current trends on stainless steel samples with different surface percentages covered by biofilm and potentiostatically polarized in natural seawater were studied under oxygen concentration changes, temperature increases, and additions of enzymic inhibitors to the solution. The results showed that on each surface fraction covered by biofilm the oxygen reduction kinetics resembled a reaction catalyzed by an immobilised enzyme with high oxygen affinity (apparent Michaelis-Menten dissociation constant close to K(O(2))(M)  ≈ 10 μM) and low activation energy (W ≈ 20 KJ mole(-1)). The proposed enzyme rapidly degraded when the temperature was increased above the ambient (half-life time of ∼1 day at 25°C, and of a few minutes at 50°C). Furthermore, when reversible enzymic inhibitors (eg sodium azide and cyanide) were added, the cathodic current induced by biofilm growth was inhibited.

Electrochemical checking of aerobic isolates from electrochemically active biofilms formed in compost

AIMS

To design a cyclic voltammetry (CV) procedure to check the electrochemical activity of bacterial isolates that may explain the electrochemical properties of biofilms formed in compost.

METHODS AND RESULTS

Bacteria catalysing acetate oxidation in garden compost were able to form electrochemically active biofilms by transferring electrons to an electrode under chronoamperometry. They were recovered from the electrode surface and identification of the isolates using 16S rRNA sequencing showed that most of them were Gammaproteobacteria, mainly related to Enterobacter and Pseudomonas spp. A CV procedure was designed to check the electrochemical activity of both groups of isolates. Preliminary CVs suggested that the bacteria were not responsible for the catalysis of acetate oxidation. In contrast, both groups of isolates were found to catalyse the electrochemical reduction of oxygen under experimental conditions that favoured adsorption of the microbial cells on the electrode surface.

CONCLUSIONS

Members of the genera Enterobacter and Pseudomonas were found to be able to catalyse the electrochemical reduction of oxygen.

SIGNIFICANCE AND IMPACT OF THE STUDY

This study has shown the unexpected efficiency of Enterobacter and Pseudomonas spp. in catalysing the reduction of oxygen, suggesting a possible involvement of these species in biocorrosion, or possible application of these strains in designing bio-cathode for microbial fuel cells.

Rapid determination of phenolic compounds in water samples by alternating-current oscillopolarographic titration

A rapid, simple and sensitive method was demonstrated for the determination of phenolic compounds in water samples by alternating-current oscillopolarographic titration. With the presence of sulfuric acid, phenol could be transferred into a nitroso-compound by reacting with NaNO2. The titration end-point was obtained by the formation of a sharp cut in the oscillopolarographic with infinitesimal NaNO2 on double platinum electrodes. The results showed that phenol concentration had an excellent linear relationship over the range of 4.82 x 10(-6)-9.65 x 10(-3) mol/L, the RSD of the proposed method was lower than 1.5%, and the spiked recoveries of three real water samples were in the range of 95.6%-106.9%.

Bulk-modified modified screen-printing carbon electrodes with both lactate oxidase (LOD) and horseradish peroxide (HRP) for the determination of l-lactate in flow injection analysis mode

A screen-printed carbon electrode modified with both HRP and LOD (SPCE-HRP/LOD) has been developed for the determination of L-lactate concentration in real samples. The resulting SPCE-HRP/LOD was prepared in a one-step procedure, and was then optimised as an amperometric biosensor operating at [0, -100]mV versus Ag/AgCl for L-lactate determination in flow injection mode. A significant improvement in the reproducibility (coefficient variation of about 10%) of the preparation of the biosensors was obtained when graphite powder was modified with LOD in the presence of HRP previously oxidised by periodate ion (IO4-). Optimisation studies were performed by examining the effects of LOD loading, periodation step and rate of the binder on analytical performances of SPCE-HRP/LOD. The sensitivity of the optimised SPCE-HRP/LOD to L-lactate was 0.84 nAL micromol(-1) in a detection range between 10 and 180 microMol. The possibility of using the developed biosensor to determine L-lactate concentrations in various dairy products was also evaluated.

Electroactive films of heme protein-coated multiwalled carbon nanotubes

A novel method for fabricating protein-MWNT films on pyrolytic graphite (PG) electrodes was described. Positively charged hemoglobin (Hb) or myoglobin (Mb) in buffers at pH 5.5 or 5.0 was first adsorbed on the surface of acid-pretreated, negatively charged multiwalled carbon nanotubes (MWNTs) mainly by electrostatic interaction, forming a core-shell structure. The aqueous dispersion of protein-coated MWNTs was then cast on PG electrodes, forming protein-MWNT films after evaporation of solvent. The protein-MWNT films exhibited a pair of well-defined, quasi-reversible cyclic voltammetric peaks, characteristic of heme Fe(III)/Fe(II) redox couples. The protein films were characterized by voltammetry, UV-vis spectroscopy, and scanning electron microscopy (SEM). This approach for assembly of protein-MWNT films showed higher surface concentration of electroactive proteins than the simple cast method, and the amount of proteins in the films could be controlled more precisely compared with the dipping method. Furthermore, the film assembly using this method was more stable than that using simple cast method. The proteins in MWNT films retained their near-native structure, and electrochemically catalyzed reduction of oxygen and hydrogen peroxide, suggesting the potential applicability of the films as the new type of biosensors or bioreactors based on direct electrochemistry of enzymes.

Controlled Nanozeolite-Assembled Electrode: Remarkable Enzyme-Immobilization Ability and High Sensitivity as Biosensor

An enzyme-immobilized nanozeolite-assembled electrode was prepared by controlled assembly of nanometer-sized Linder type-L zeolite (nano-LTL-zeolite) on an indium tin oxide (ITO) glass electrode surface, and subsequent immobilization of cytochrome c. Cyclic voltammetric (CV) and amperometric experiments showed that, relative to other reported electrodes, the enzyme-immobilized electrodes possess fast electron-transfer rates (2.2 s(-1)), a broad linear range (15-540 micromol L(-1)), a low detection limit (3.2 nmol L(-1)), a remarkably long lifetime (5 months), and high stability in the pH range 5-10. These characteristics could be due to the fact that nanozeolites assembled on ITO have high immobilization ability and facilitate interaction with enzymes. The function controllability of these enzyme electrodes, resulting from the facile manipulability of nanozeolite-assembled layers, may provide a possibility to rationally design biosensors.

Electron transfer reactivity and the catalytic activity of horseradish peroxidase incorporated in dipalmitoylphosphatidic acid films

Horseradish peroxidase (HRP) was incorporated in dipalmitoylphosphatidic acid (DPPA) to form a film and the film was modified on pyrolytic graphite electrode. UV-Vis spectra suggested that HRP in the film could keep its secondary structure similar to the native state. A pair of stable, well-defined, and quasi-reversible cyclic voltammetric peaks was observed with the formal potential at -276.2 mV (vs. saturated calomel electrode), characteristic of heme Fe(III)/Fe(II) redox couple of HRP. The apparent heterogeneous electron transfer rate constant and other electrochemical parameters were presented. The catalytic activity of HRP in DPPA film toward oxygen, hydrogen peroxide and nitric oxide were also examined.

An electrochemical investigation of hemoglobin and catalase incorporated in collagen films

Collagen, an electrochemically inert protein, formed films on pyrolytic graphite (PG) electrodes, which provided a suitable microenvironment for heme proteins to transfer electron directly with the underlying electrodes. Hemoglobin (Hb) and catalase (Cat) incorporated in collagen films exhibited a pair of well-defined and quasi-reversible cyclic voltammetric peaks at around -0.35 V and -0.47 V (vs. SCE) in pH 7.0 buffers, respectively, characteristic of the protein heme Fe(III)/Fe(II) redox couples. UV-vis spectra showed that the heme proteins in collagen films retained their near-native conformations in the medium pH range. The results of scanning electron microscopy (SEM) demonstrated that the interaction between heme proteins and collagen made the morphology of dry protein-collagen films different from the collagen films alone. The electrochemical parameters such as apparent heterogeneous electron transfer rate constant (k(s)) and formal potential (E degrees ') of the films were estimated by using square wave voltammograms (SWV) and nonlinear regression analysis. The heme protein-collagen film electrodes were also used to catalyze the reduction of nitrite, oxygen and hydrogen peroxide, indicating potential applications of the films for the fabrication of a new type of biosensor that does not use mediators.

Bioelectrochemically functional nanohybrids through co-assembling of proteins and surfactants onto carbon nanotubes: facilitated electron transfer of assembled proteins with enhanced faradic response

Preparation and bioelectrochemical properties of functional nanohybrids through co-assembling of hemeproteins (i.e., horseradish peroxidase, hemoglobin, myoglobin and cytochrome c) and surfactants onto carbon nanotubes (CNTs) are described. The prepared protein-surfactant-CNT nanohybrids are found to possess facilitated interfacial electron transfer of the proteins with enhanced faradic responses. The enhancements are ascribed for the first time to the properties of the surfactants for facilitation of protein electrochemistry and the improved portion of electroactive proteins assembled, of which the latter assignment is closely associated with the electrochemical and structural properties of the nanotubes and the three-dimensional architecture of the CNT film confined onto the glassy carbon electrode. It is proposed that the single and/or small bundles of the nanotubes in the CNT film electrode can be rationally functionalized with surfactants to be functional nanoelectrodes capable of facilitating electron transfer of proteins. The three-dimensional confinement of these functional nanowires onto the GC electrode essentially increases the portion of electroactive proteins assembled in the nanohybrids. These properties of the protein-surfactant-CNT nanohybrids, combined with the bioelectrochemical catalytic activity, could make them useful for development of bioelectronic devices and investigation of protein electrochemistry at functional interfaces.

Third-generation biosensors based on the direct electron transfer of proteins

Recent progress in third-generation electrochemical biosensors based on the direct electron transfer of proteins is reviewed. The development of three generations of electrochemical biosensors is also simply addressed. Special attention is paid to protein-film voltammetry, which is a powerful way to obtain the direct electron transfer of proteins. Research activities on various kinds of biosensors are discussed according to the proteins (enzymes) used in the specific work.