Diverse Structures and Magnetic Properties in Nonlayered Monolayer Chromium Selenide

Spin-valley coupling enhanced high-TC ferromagnetism in a non-van der Waals monolayer Cr2Se3 on graphene

Spin-valley magnetic ordering is restricted to layered van der Waals type transition-metal dichalcogenides with ordering temperatures below 55 K. Recent theoretical studies on non-van der Waals structures have predicted spin-valley polarization induced semiconducting ferromagnetic ground states, but experimental validation is missing. We report high-Curie temperature (TC ~ 225 K) metallic ferromagnetism with spontaneous spin-valley polarization in monolayer Cr2Se3 on graphene. Angle-resolved photoemission spectroscopy (ARPES) reveals systematic temperature-dependent energy shifts and splitting of localized Cr 3 d↑-t2g bands, accompanied by occupancy of the itinerant Cr 3d-eg valleys. The t2g-eg spin-valley coupling at the K/K' points of hexagonal Brillouin zone leads to ferromagnetic ordering. Circular dichroism in ARPES shows clear evidence of spin-valley polarized states. Comparison with bilayer and trilayer Cr2Se3 reveals the crucial role of valley carrier density in enhancing TC and provides a guiding principle to realize 2D ferromagnetism at higher temperatures in non-van der Waals materials.

Engineering 2D Materials from Single-Layer NbS2

Starting from a single layer of NbS2 grown on graphene by molecular beam epitaxy, the single unit cell thick 2D materials Nb5/3S3-2D and Nb2S3-2D are created using two different pathways. Either annealing under sulfur-deficient conditions at progressively higher temperatures or deposition of increasing amounts of Nb at elevated temperature result in phase-pure Nb5/3S3-2D followed by Nb2S3-2D. The materials are characterized by scanning tunneling microscopy, scanning tunneling spectroscopy, and X-ray photoemission spectroscopy. The experimental assessment combined with systematic density functional theory calculations reveals their structure. The 2D materials are covalently bound without any van der Waals gap. Their stacking sequence and structure are at variance with expectations based on corresponding bulk materials highlighting the importance of surface and interface effects in structure formation.

Observation of kagome-like bands in two-dimensional semiconducting Cr8Se12

The kagome lattice is a versatile platform for investigating correlated electronic states. However, its realization in two-dimensional (2D) semiconductors for tunable device applications is still challenging. An alternative strategy to create kagome-like bands is to realize a coloring-triangle (CT) lattice in semiconductors through a distortion of a modified triangular lattice. Here, we report the observation of low-energy kagome-like bands in a semiconducting 2D transition metal chalcogenide-Cr8Se12 with a thickness of 7 atomic layers-which exhibits a CT lattice and a bandgap of 0.8 eV. The Cr-deficient layer beneath the topmost Se-full layer is partially occupied with 2/3 occupancy, yielding a √3 × √3 Cr honeycomb network. Angle-resolved photoemission spectroscopy measurements and first-principles investigations reveal the surface kagome-like bands near the valence band maximum, which are attributed to topmost Se pz orbitals modulated by the honeycomb Cr.

Microscopy aided detection of the self-intercalation mechanism and in situ electronic properties in chromium selenide

Two-dimensional (2D) chromium-based self-intercalated materials Cr1+nX2 (0 ≤ n ≤ 1, X = S, Se, Te) have attracted much attention because of their tunable magnetism with good environmental stability. Intriguingly, the magnetic and electrical properties of the materials can be effectively tuned by altering the coverage and spatial arrangement of the intercalated Cr (ic-Cr) within the van der Waals gap, contributing to different stoichiometries. Several different Cr1+nX2 systems have been widely investigated recently; however, those with the same stoichiometric ratio (such as Cr1.25Te2) were reported to exhibit disparate magnetic properties, which still lacks explanation. Therefore, a systematic in situ study of the mechanisms with microscopy techniques is in high demand to look into the origin of these discrepancies. Herein, 2D self-intercalated Cr1+nSe2 nanoflakes were synthesized as a platform to conduct the characterization. Combining scanning transmission electron microscopy (STEM) and scanning tunneling microscopy (STM), we studied in depth the microscopic structure and local electronic properties of the Cr1+nSe2 nanoflakes. The self-intercalation mechanism of ic-Cr and local stoichiometric-ratio variation in a Cr1+nSe2 ultrathin nanoflake is clearly detected at the nanometer scale. Scanning tunneling spectroscopy (STS) measurements indicate that Cr1.5Se2/Cr2Se2 and Cr1.25Se2 exhibit conductive and semiconductive behaviors, respectively. The STM tip manipulation method is further applied to manipulate the microstructure of Cr1+nSe2, which successfully produces clean zigzag-type boundaries. Our systematic microscopy study paves the way for the in-depth study of the magnetic mechanism of 2D self-intercalated magnets at the nano/micro scale and the development of new magnetic and spintronic devices.

Evidence of Ferromagnetism and Ultrafast Dynamics of Demagnetization in an Epitaxial FeCl2 Monolayer

The development of two-dimensional (2D) magnetism is driven not only by the interest of low-dimensional physics but also by potential applications in high-density miniaturized spintronic devices. However, 2D materials possessing a ferromagnetic order with a relatively high Curie temperature (Tc) are rare. In this paper, the evidence of ferromagnetism in monolayer FeCl2 on Au(111) surfaces, as well as the interlayer antiferromagnetic coupling of bilayer FeCl2, is characterized by using spin-polarized scanning tunneling microscopy. A Curie temperature (Tc) of ∼147 K is revealed for monolayer FeCl2, based on our static magneto-optical Kerr effect measurements. Furthermore, temperature-dependent magnetization dynamics is investigated by the time-resolved magneto-optical Kerr effect. A transition from one- to two-step demagnetization occurs as the lattice temperature approaches Tc, which supports the Elliott-Yafet spin relaxation mechanism. The findings contribute to a deeper understanding of the underlying mechanisms governing ultrafast magnetization in 2D ferromagnetic materials.

Stoichiometry-Tunable Synthesis and Magnetic Property Exploration of Two-Dimensional Chromium Selenides

Emerging 2D chromium-based dichalcogenides (CrXn (X = S, Se, Te; 0 < n ≤ 2)) have provoked enormous interests due to their abundant structures, intriguing electronic and magnetic properties, excellent environmental stability, and great application potentials in next generation electronics and spintronics devices. Achieving stoichiometry-controlled synthesis of 2D CrXn is of paramount significance for such envisioned investigations. Herein, we report the stoichiometry-controlled syntheses of 2D chromium selenide (CrxSey) materials (rhombohedral Cr2Se3 and monoclinic Cr3Se4) via a Cr-self-intercalation route by designing two typical chemical vapor deposition (CVD) strategies. We have also clarified the different growth mechanisms, distinct chemical compositions, and crystal structures of the two type materials. Intriguingly, we reveal that the ultrathin Cr2Se3 nanosheets exhibit a metallic feature, while the Cr3Se4 nanosheets present a transition from p-type semiconductor to metal upon increasing the flake thickness. Moreover, we have also uncovered the ferromagnetic properties of 2D Cr2Se3 and Cr3Se4 below ∼70 K and ∼270 K, respectively. Briefly, this research should promote the stoichiometric-ratio controllable syntheses of 2D magnetic materials, and the property explorations toward next generation spintronics and magneto-optoelectronics related applications.

Phase-selective in-plane heteroepitaxial growth of H-phase CrSe2

Phase engineering of two-dimensional transition metal dichalcogenides (2D-TMDs) offers opportunities for exploring unique phase-specific properties and achieving new desired functionalities. Here, we report a phase-selective in-plane heteroepitaxial method to grow semiconducting H-phase CrSe2. The lattice-matched MoSe2 nanoribbons are utilized as the in-plane heteroepitaxial template to seed the growth of H-phase CrSe2 with the formation of MoSe2-CrSe2 heterostructures. Scanning tunneling microscopy and non-contact atomic force microscopy studies reveal the atomically sharp heterostructure interfaces and the characteristic defects of mirror twin boundaries emerging in the H-phase CrSe2 monolayers. The type-I straddling band alignments with band bending at the heterostructure interfaces are directly visualized with atomic precision. The mirror twin boundaries in the H-phase CrSe2 exhibit the Tomonaga-Luttinger liquid behavior in the confined one-dimensional electronic system. Our work provides a promising strategy for phase engineering of 2D TMDs, thereby promoting the property research and device applications of specific phases.

van der Waals 2D transition metal dichalcogenide/organic hybridized heterostructures: recent breakthroughs and emerging prospects of the device

The near-atomic thickness and organic molecular systems, including organic semiconductors and polymer-enabled hybrid heterostructures, of two-dimensional transition metal dichalcogenides (2D-TMDs) can modulate their optoelectronic and transport properties outstandingly. In this review, the current understanding and mechanism of the most recent and significant breakthrough of novel interlayer exciton emission and its modulation by harnessing the band energy alignment between TMDs and organic semiconductors in a TMD/organic (TMDO) hybrid heterostructure are demonstrated. The review encompasses up-to-date device demonstrations, including field-effect transistors, detectors, phototransistors, and photo-switchable superlattices. An exploration of distinct traits in 2D-TMDs and organic semiconductors delves into the applications of TMDO hybrid heterostructures. This review provides insights into the synthesis of 2D-TMDs and organic layers, covering fabrication techniques and challenges. Band bending and charge transfer via band energy alignment are explored from both structural and molecular orbital perspectives. The progress in emission modulation, including charge transfer, energy transfer, doping, defect healing, and phase engineering, is presented. The recent advancements in 2D-TMDO-based optoelectronic synaptic devices, including various 2D-TMDs and organic materials for neuromorphic applications are discussed. The section assesses their compatibility for synaptic devices, revisits the operating principles, and highlights the recent device demonstrations. Existing challenges and potential solutions are discussed. Finally, the review concludes by outlining the current challenges that span from synthesis intricacies to device applications, and by offering an outlook on the evolving field of emerging TMDO heterostructures.

Two-Dimensional Transition Metal Boride TMB12 (TM = V, Cr, Mn, and Fe) Monolayers: Robust Antiferromagnetic Semiconductors with Large Magnetic Anisotropy

Currently, two-dimensional (2D) materials with intrinsic antiferromagnetism have stimulated research interest due to their insensitivity to external magnetic fields and absence of stray fields. Here, we predict a family of stable transition metal (TM) borides, TMB12 (TM = V, Cr, Mn, Fe) monolayers, by combining TM atoms and B12 icosahedra based on first-principles calculations. Our results show that the four TMB12 monolayers have stable antiferromagnetic (AFM) ground states with large magnetic anisotropic energy. Among them, three TMB12 (TM=V, Cr, Mn) monolayers display an in-plane easy magnetization axis, while the FeB12 monolayer has an out-of-plane easy magnetization axis. Among them, the CrB12 and the FeB12 monolayers are AFM semiconductors with band gaps of 0.13 eV and 0.35 eV, respectively. In particular, the AFM FeB12 monolayer is a spin-polarized AFM material with a Néel temperature of 125 K. Moreover, the electronic and magnetic properties of the CrB12 and the FeB12 monolayers can be modulated by imposing external biaxial strains. Our findings show that the TMB12 monolayers are candidates for designing 2D AFM materials, with potential applications in electronic devices.

Two-Dimensional Artificial Ge Superlattice Confining in Electronic Kagome Lattice Potential Valleys

Constructing two-dimensional (2D) artificial superlattices based on single-atom and few-atom nanoclusters is of great interest for exploring exotic physics. Here we report the realization of two types of artificial germanium (Ge) superlattice self-confined by a 37 × 37 R25.3° superstructure of bismuth (Bi) induced electronic kagome lattice potential valleys. Scanning tunneling microscopy measurements demonstrate that Ge atoms prefer to be confined in the center of the Bi electronic kagome lattice, forming a single-atom superlattice at 120 K. In contrast, room temperature grown Ge atoms and clusters are confined in the sharing triangle corner and the center, respectively, of the kagome lattice potential valleys, forming an artificial honeycomb superlattice. First-principle calculations and Mulliken population analysis corroborate that our reported atomically thin Bi superstructure on Au(111) has a kagome surface potential valley with the center of the inner Bi hexagon and the space between the outer Bi hexagons being energetically favorable for trapping Ge atoms.

2D Materials by Design: Intercalation of Cr or Mn between two VSe2 van der Waals Layers

Insertion of metal layers between layered transition-metal dichalcogenides (TMDs) enables the design of new pseudo-2D nanomaterials. The general premise is that various metal atoms may adopt energetically favorable intercalation sites between two TMD sheets. These covalently bound metals arrange in metastable configurations and thus enable the controlled synthesis of nanomaterials in a bottom-up approach. Here, this method is demonstrated by the insertion of Cr or Mn between VSe2 layers. Vacuum-deposited transition metals diffuse between VSe2 layers with increasing concentration, arranging in ordered phases. The Cr3+ or Mn2+ ions are in octahedral coordination and thus in a high-spin state. Measured and computed magnetic moments are high for dilute Cr atoms, but with increasing Cr concentration the average magnetic moment decreases, suggesting antiferromagnetic ordering between Cr ions. The many possible combinations of transition metals with TMDs form a library for exploring quantum phenomena in these nanomaterials.

Infrequent Cubane-Like Chromium Sulfide Cluster with σ-Donor Ligands with Efficient Electrocatalytic Property Toward Hydrogen Evolution Reaction

The exploitation of efficient and economical electrocatalysts for hydrogen evolution reaction (HER) is of exceeding interest in renewable clean-energy technologies. Herein, the facile solvothermal reaction of S and chromic acetate in ethylenediamine (en) achieved a novel organic hybrid chromium sulfide [Cr₄(μ₃-S)₄(en)₄(SH)₄]·0.25H₂O (1), which offers a new type of antiferromagnetic cubane-like chromium sulfide cluster with σ-donor en ligands. 1 was utilized in combination with Ni nanoparticles and porous Ni foam (NF) to fabricate a Ni/1/NF electrode as an efficient cathodic catalyst, indicating excellent electrocatalytic property toward HER.

Epitaxial growth and electronic properties of an antiferromagnetic semiconducting VI2 monolayer

The van der Waals materials down to the monolayer (ML) limit provide a fertile platform for exploring low-dimensional magnetism and developing the novel applications of spintronics. Among them, due to the absence of the net magnetic moment, antiferromagnetic (AFM) materials have received much less attention than ferromagnetic ones. Here, by combining scanning tunneling microscopy and state-of-the-art first-principles calculations, we investigate the preparation, and electronic and magnetic properties of a vanadium(II) iodide (VI₂) ML. Single-layer VI₂ has been grown by molecular beam epitaxy on Au(111) surfaces. A band gap of 2.8 eV is revealed, indicating the semiconducting nature of the VI₂ ML. Vanadium and iodine vacancy defects give rise to additional feature states within the bandgap. A typical 120° AFM spin ordering is maintained in the ML limit of VI₂, as revealed by the first-principles calculations. Besides, the AFM coupling is greatly enhanced by slightly decreasing lattice constants. Our work provides an ideal platform for further studying two-dimensional magnetism with non-collinear AFM ordering and for investigating the possibility of realizing the spin Hall effect in the ML limit.

Emergent Topological Hall Effect from Exchange Coupling in Ferromagnetic Cr2Te3/Noncoplanar Antiferromagnetic Cr2Se3 Bilayers

The topological Hall effect has been observed in magnetic materials of complex spin structures or bilayers of trivial magnets and strong spin-orbit-coupled systems. In view of current attention on dissipationless topological electronics, the occurrence of the topological Hall effect in new systems or by an unexpected mechanism is fascinating. Here, we report a robust topological Hall effect generated in bilayers of a ferromagnet and a noncoplanar antiferromagnet, from the interfacial Dzyaloshinskii-Moriya interaction due to the exchange coupling of magnetic layers. Molecular beam epitaxy has been utilized to fabricate heterostructures of a ferromagnetic metal Cr₂Te₃ and a noncoplanar antiferromagnet Cr₂Se₃. A significant topological Hall effect at low temperature implies the development of nontrivial spin chirality, and density functional theory calculations explain the correlation of the Dzyaloshinskii-Moriya interaction increase and inversion symmetry breaking at the interface. The presence of noncoplanar ordering in the antiferromagnet plays a pivotal role in producing the topological Hall effect. Our results suggest that the exchange coupling in ferromagnet/noncoplanar antiferromagnet bilayers could be an alternative mechanism toward topologically protected magnetic structures.

Two-dimensional magnetic atomic crystals

Two-dimensional (2D) magnetic crystals show many fascinating physical properties and have potential device applications in many fields. In this paper, the preparation, physical properties and device applications of 2D magnetic atomic crystals are reviewed. First, three preparation methods are presented, including chemical vapor deposition (CVD) molecular beam epitaxy (MBE) and single-crystal exfoliation. Second, physical properties of 2D magnetic atomic crystals, including ferromagnetism, antiferromagnetism, magnetic regulation and anomalous Hall effect are presented. Third, the application of 2D magnetic atomic crystals in heterojunctions reluctance and other aspects are briefly introduced. Finally, the future development direction and possible challenges of 2D magnetic atomic crystals are briefly addressed.