Large area, few-layer graphene films on arbitrary substrates by chemical vapor deposition

Radio frequency switching devices based on two-dimensional materials for high-speed communication applications

Two-dimensional (2D) materials, with their atomic-scale thickness, high carrier mobility, tunable wide bandgap, and excellent electrical and mechanical properties, have demonstrated vast application prospects in research on radio frequency (RF) switch devices. This review summarizes the recent advances in 2D materials for RF switch applications, focusing on the performance and mechanisms of 2D material-based RF switch devices at high frequencies, wide bandwidths, and high transmission rates. The analysis includes the design and optimization of devices based on graphene, transition metal dichalcogenides, hexagonal boron nitride, and their heterojunctions. By comparing the key performance parameters such as insertion loss, isolation, and cutoff frequency of the switches, this review reveals the influence of material selection, structural design, and defect control on device performance. Furthermore, it discusses the challenges of 2D material-based RF switches in practical applications, including material defect control, reduction of contact resistance, and the technical bottlenecks of large-scale industrial production. Finally, this review envisions future research directions, proposing potential pathways for improving device performance through heterojunction structure design, multifunctional integration, and process optimization. This study is of great significance for advancing the development of high-performance RF switches and the application of communication technologies in 6G and higher frequency bands.

Biomass-Based Sustainable Graphene for Advanced Electronic Technology: A Review

Through its remarkable mechanical, electrical, and thermal qualities, graphene has become a revolutionary material in electronics. Sustainable graphene synthesis from biomass residues offers a possible path toward adhering to the demand for economical and ecologically friendly graphene production methods. The present study thoroughly examines the numerous biomass sources used for graphene synthesis, such as plant-derived materials, agricultural waste, and other organic leftovers. The benefits and drawbacks of several synthesis methods are examined, including pyrolysis, chemical exfoliation, and hydrothermal carbonization. The study also explores the possible uses of graphene produced from biomass in electronics, including sensors, energy storage devices, electronic devices with flexibility, and electromagnetic interference (EMI) shielding. This review highlights how biomass-based graphene can revolutionize the electronics sector by bridging the gap between electronic applications, synthesis techniques, and biomass supplies.

Novel Amperometric Sensor Based on Glassy Graphene for Flow Injection Analysis

Flow injection analysis (FIA) is widely used in drug screening, neurotransmitter detection, and water analysis. In this study, we investigated the electrochemical sensing performance of glassy graphene electrodes derived from pyrolyzed positive photoresist films (PPFs) via rapid thermal annealing (RTA) on SiO2/Si and polycrystalline diamond (PCD). Glassy graphene films fabricated at 800, 900, and 950 °C were characterized using Raman spectroscopy, scanning electron microscopy (SEM), and atomic force microscopy (AFM) to assess their structural and morphological properties. Electrochemical characterization in phosphate-buffered saline (PBS, pH 7.4) revealed that annealing temperature and substrate type influence the potential window and double-layer capacitance. The voltammetric response of glassy graphene electrodes was further evaluated using the surface-insensitive [Ru(NH3)6]3+/2+ redox marker, the surface-sensitive [Fe(CN)6]3-/4- redox couple, and adrenaline, demonstrating that electron transfer efficiency is governed by annealing temperature and substrate-induced microstructural changes. FIA with amperometric detection showed a linear electrochemical response to adrenaline in the 3-300 µM range, achieving a low detection limit of 1.05 µM and a high sensitivity of 1.02 µA cm-2/µM. These findings highlight the potential of glassy graphene as a cost-effective alternative for advanced electrochemical sensors, particularly in biomolecule detection and analytical applications.

Vertical DNA Nanostructure Arrays: Facilitating Functionalization on Macro-Scale Surfaces

The capability for varied functionalization and precise control at the nanoscale are significant advantages of DNA nanostructures. In the assembly of DNA nanostructure, the surface-assisted growth method utilizing double-crossover (DX) tile structures facilitates nucleation at relatively low concentrations on the surface based on electrostatic interactions, thereby enabling crystal growth over large areas. However, in surface-assisted growth, the geometrical hindrance of vertical structures on the DX tile structure surface makes it challenging to conjugate DNA nanostructures into fabricated surfaces. Here, the surface-assisted growth method was employed to extend the DX tile growth for forming vertical structure arrays on the substrate, providing attachment sites for functionalization on uniformly covered substrates at the macroscopic scale. Additionally, the spacing of the vertical structure arrays was demonstrated to be controllable through the strategic design of the repeating unit tiles that construct the DX crystals.

Graphitization of tincone via molecular layer deposition: investigating sulfur's role and structural impacts

This study investigated the synthesis of sp2 carbons using molecular layer deposition (MLD) with tincone, which utilized tetrakis(dimethylamido)tin (TDMASn) as the metal precursor and 4-mercaptophenol (4MP) as the organic linker. Tincone films were deposited at 100 °C without impurities and then subjected to vacuum post-annealing in a tube furnace to induce graphitization. Compositional and structural analyses revealed significant changes as the annealing temperature increased, including the breakdown of the bonds between Sn, O, S, and C. This process led to the reduction of Sn, O, and S and the formation of sp2 carbons. At 400 °C, the film thickness was reduced by 57.5%, and the refractive index increased from 1.8 to 1.97, as confirmed by the emergence of G-band and 2D-band peaks in the Raman spectra. X-ray photoelectron spectroscopy analysis indicated that the residual Sn content decreased to 0.75% at 600 °C. Interestingly, at temperatures above 400 °C, unique behavior was observed: increased C-S bonding disrupted the graphite structure due to the thiol (-SH) groups in 4MP. This disruption led to a reduction in C-C bonding and a decrease in the G-band peak in the Raman spectra. This study provides the first detailed investigation of the role of S in the graphitization of tincone, highlighting its impact on sp2 carbon formation and emphasizing the importance of the careful selection of precursors and linkers in MLD processes.

Heterojunctions Based on 2D Materials for Pulse Laser Applications

In recent years, heterostructures composed of two-dimensional (2D) materials have demonstrated broad application prospects across various domains, primarily attributed to their exceptional electrical and optical properties. The superior performance of these heterostructures is rooted in the interlayer interactions and the diversity of the constituent materials. Notably, their applications have been greatly advanced in optical fields such as photodetectors, lasers, modulators, optical sensors, and nonlinear optics. etc. This review delineates the advancement of heterostructures based on 2D materials and discusses the electronic structural properties of their interfaces and band alignments while summarizing their carrier dynamics and nonlinear optical characteristics. Furthermore, it explores the synthesis techniques of 2D heterostructures and their applications as saturable absorbers in laser Q-switching and mode-locking, emphasizing the critical role that type-I and type-II heterojunctions have played in advancing laser technology. Lastly, the challenges and future opportunities in the application of 2D heterostructures in laser technologies are reviewed, offering insights on the potential directions for further research in this field.

Carbon Materials in Voltammetry: An Overview of Versatile Platforms for Antidepressant Drug Detection

This review concentrates on the application of carbon-based materials in the development and fabrication of voltammetric sensors of antidepressant drugs used in the treatment of moderate to severe depression, anxiety disorders, personality disorders, and various phobias. Voltammetric techniques offer outstanding sensitivity and selectivity, accuracy, low detection limit, high reproducibility, instrumental simplicity, cost-effectiveness, and short time of direct determination of antidepressant drugs in pharmaceutical and clinical samples. Moreover, the combination of voltammetric approaches with the unique characteristics of carbon and its derivatives has led to the development of powerful electrochemical sensing tools for detecting antidepressant drugs, which are highly desirable in healthcare, environmental monitoring, and the pharmaceutical industry. In this review, carbon-based materials, such as glassy carbon and boron-doped diamond, and a wide spectrum of carbon nanoparticles, including graphene, graphene oxides, reduced graphene oxides, single-walled carbon nanotubes, and multi-walled carbon nanotubes were described in terms of the sensing performance of agomelatine, alprazolam, amitriptyline, aripiprazole, carbamazepine, citalopram, clomipramine, clozapine, clonazepam, desipramine, desvenlafaxine, doxepin, duloxetine, flunitrazepam, fluoxetine, fluvoxamine, imipramine, nifedipine, olanzapine, opipramol, paroxetine, quetiapine, serotonin, sertraline, sulpiride, thioridazine, trazodone, venlafaxine, and vortioxetine.

Advancing Frontiers: Graphene-Based Nano-biosensor Platforms for Cutting-Edge Research and Future Innovations

Graphene and its derivatives have excellent electrical, mechanical, and optical capabilities, making it the perfect foundation for sensing living things. Graphene-based nano biosensors have shown exceptional sensitivity, selectivity, and quick response times when used to detect a range of analytes, such as biomolecules, cells, and pathogens. The main uses of graphene-based nano biosensors are disease diagnosis, environmental monitoring, food safety, and drug development. It also explores prospective future strategies, such as methods for functionalizing nanomaterials, their incorporation with other nanomaterials, and the creation of wearable and implantable gadgets. Various signalling techniques, such as fluorescence, electrochemistry, surface plasmon resonance, surface-enhanced Raman scattering, etc., can be coupled with graphene-based biosensors to quantitatively detect disease-associated DNA, RNA, and protein biomarkers quantitatively. Graphene-based nano biosensors, combined with cutting-edge innovations like artificial intelligence and the Internet of Things, can completely transform industries like healthcare and environmental monitoring. Developing these biosensors with high sensitivity and low detection limits provides a new direction in medical and personal care. The later portion of the review covers the difficulties, prospective fixes, and opportunities of graphene-based biosensors.

Catalytic Cu2O/Cu Site Trades off the Coupling and Etching Reactions of Carbon Intermediates for CO2-Assisted Graphene Synthesis

In the chemical vapor deposition (CVD) synthesis of graphene, the surficial chemical state of the metal substrate has exerted key roles in all elemental reaction steps determining the growth mechanism of graphene. Herein, a CO2-participated annealing procedure is designed to construct catalytic Cu2O/Cu sites on Cu foil for the graphene CVD synthesis with CO2/CH4 as carbon sources. These Cu2O/Cu species can catalyze the CH4 decomposition and subsequent C─C coupling to form C2 intermediates for fast growth of monolayer hexagonal graphene domains with a diameter of ≈30 µm within 0.5 min. The graphene growth kinetics can be bidirectionally regulated merely with the variation of CO2 flow rate during annealing and growth stages, in association with the Cu+/Cu0 ratio, enabling simultaneous control over the size and shape of graphene domains. Density functional theory (DFT) calculations indicate that the catalytic Cu2O/Cu sites reduce the activation energy by ≈0.13 eV for the first dehydrogenation of CH4, allowing the growing rate of graphene driven by coupling of C2 intermediates faster than their etching rate by O-containing *O and *OH species. The work provides novel insights into heterostructured nano-catalyst consisting of zero valent metal and variably valent metal oxide that facilitate the controllable synthesis of graphene materials.

Nanomaterials for spin-based quantum information

Quantum information science has garnered significant attention due to its potential in solving problems that are beyond the capabilities of classical computations based on integrated circuits. At the heart of quantum information science is the quantum bit or qubit, which is used to carry information. Achieving large-scale and high-fidelity quantum bits requires the optimization of materials with trap-free characteristics and long coherence times. Nanomaterials have emerged as promising candidates for building qubits due to their inherent quantum confinement effect, enabling the manipulation and addressing of individual spins within nanostructures. In this comprehensive review, we focus on quantum bits based on nanomaterials, including 0D quantum dots, 1D nanotubes and nanowires, and 2D nanoplatelets and nanolayers. Our review aims to bridge the gap between nanotechnology and quantum information science, with a particular emphasis on material science aspects such as material selection, properties, and synthesis. By providing insights into these areas, we contribute to the understanding and advancement of nanomaterial-based quantum information science.

Graphene-Enhanced Refreshable Metasurface Expands Analytes of THz Label-Free Sensing and Achieves Picogram Limit of Detection

THz sensing offers unique advantages including strong penetrability, low photon energy, and specific recognition of biomolecules and chemicals. However, current label-free THz sensors all operate below 1 THz, severely limiting applications as many drugs and chemicals vibrate at higher THz frequencies. Moreover, the THz detection of analytes at picogram levels is challenging. Here, a modern graphene-enhanced THz metasurface label-free sensor is presented. Its tunable resonance from ∼1.8 to 2.6 THz matches the fingerprint resonant frequencies of various analytes not currently detectable by label-free THz sensing. Quantitative detection of trace 1,3-DNB (absorbing at ∼2.52 THz) is first achieved with a maximum reflectance sensitivity of ∼10% pmol-1 and a detection limit of 42 pg. The sensor can also be refreshed, minimizing cost and being more environmentally friendly. Our strategy expands application scenarios of label-free THz sensing, enhancing its potential in fields such as the pharmaceutical industry, environmental monitoring, and security.

Irrigation System-Inspired Open-/Closed-Pore Hybrid Porous Silicon-Carbon Materials for Lithium-Ion Battery Anodes

Porous silicon-carbon (Si-C) nanocomposites exhibit high specific capacity and low electrode strain, positioning them as promising next-generation anode materials for lithium-ion batteries (LIBs). However, nanoscale Si's poor dispersibility and severe interfacial side reactions historically hamper battery performance. Inspired by irrigation systems, this study employs a charge-driven Si dispersion and stepwise assembly strategy to fabricate an open-/closed-pore hybrid porous Si-C composite. Polydimethyl diallyl ammonium chloride (PDDA) is used to functionalize Si nanoparticles, inducing strong electrostatic repulsion for uniform dispersion. Subsequently, the PDDA functional layer on Si nanoparticle surfaces facilitates the stepwise self-assembly of acetic acid and chitosan, resulting in Si nanoparticles encapsulated within closed pores during carbonization. Simultaneously, the PDDA functional layers transform into a graphene coating on the Si nanoparticles. Conversely, regions of homogeneous acetic acid/chitosan, distant from the PDDA-functionalized Si nanoparticles, form an open-pore structure. The dual shielding effect of closed carbon pores and the graphene coating effectively isolates Si from the electrolyte, preventing interfacial side reactions. Open carbon pores enhance electrolyte-active material contact, reducing Li+ transport distances. The resulting composite material (PDDA@Si/C) demonstrated excellent cycling stability and superior rate performance as a LIB anode.

A composite of pineapple leaf-derived porous carbon integrated with ZnCo-MOF for high-performance supercapacitors

Electrochemical energy storage heavily depends on the activity and stability of electrode materials. However, the direct use of metal-organic frameworks (MOFs) as supercapacitor electrode materials poses challenges due to their low electrical conductivity. In this study, pineapple leaf-derived biochar (PLB) was employed as a carrier for bimetallic ZnCo-MOF, resulting in the composite ZnCo-MOF@PLB-800, synthesized through in situ growth and pyrolysis at 800 °C. The highly porous structure of PLB alleviated the aggregation of ZnCo-MOF particles, thereby enhancing the electron transfer rate and improving the conductivity of the electrode material. Electrochemical testing revealed that ZnCo-MOF@PLB-800 achieved a specific capacitance of 698.5 F g-1 at a current density of 1 A g-1. The assembled asymmetric supercapacitor (ASC) demonstrated excellent specific capacitance and electrochemical stability, delivering a high energy density of 35.85 W h kg-1 at a power density of 350 W kg-1, with robust cycle stability, retaining 90.4% capacitance after 8000 cycles. This work offers an effective integration of bimetallic MOFs with waste biomass-derived porous carbon for electrode materials, supporting both energy storage applications and environmental sustainability.

High-Fidelity Transfer of 2D Semiconductors and Electrodes for van der Waals Devices

As traditional silicon-based materials almost reach their limits in the post-Moore era, two-dimensional (2D) transition metal dichalcogenides (TMDCs) have been regarded as next-generation semiconductors for high-performance electrical and optical devices. Chemical vapor deposition (CVD) is a widely used technique for preparing large-area and high-quality TMDCs. Yet, it suffers from the challenge of transfer due to the strong interaction between 2D materials and substrates. The traditional PMMA-assisted wet etching method tends to induce damage, wrinkles, and inevitable polymer residues. In this work, we propose an etch-free and clean transfer method via a water intercalation strategy for TMDCs, ensuring a high-fidelity, wrinkle-free, and crack-free transfer with negligible residues. Furthermore, metal electrodes can also be transferred via this method and back-gate field-effect transistors (FETs) based on CVD-grown monolayer WSe2 with van der Waals (vdW) metal/semiconductor contacts are fabricated. Compared to the PMMA-assisted transfer method (∼1.2 cm2 V-1 s-1 hole mobility with ∼2 × 106 ON/OFF ratio), our high-fidelity transfer method significantly enhances the electrical performance of WSe2 FET over one order of magnitude, achieving a hole mobility of ∼43 cm2 V-1 s-1 and a high ON/OFF ratio of ∼5 × 107 in air at room temperature.

Laser-assisted synthesis and modification of 2D materials

Two-dimensional (2D) materials with unique physical, electronic, and optical properties have been intensively studied to be utilized for the next-generation electronic and optical devices, and the use of laser energy in the synthesis and modification of 2D materials is advantageous due to its convenient and fast fabrication processes as well as selective, controllable, and cost-effective characteristics allowing the precise control in materials properties. This paper summarizes the recent progress in utilizations of laser technology in synthesizing, doping, etching, transfer and strain engineering of 2D materials, which is expected to provide an insight for the future applications across diverse research areas.

Carbon encapsulated nanoparticles: materials science and energy applications

The technological implementation of electrochemical energy conversion and storage necessitates the acquisition of high-performance electrocatalysts and electrodes. Carbon encapsulated nanoparticles have emerged as an exciting option owing to their unique advantages that strike a high-level activity-stability balance. Ever-growing attention to this unique type of material is partly attributed to the straightforward rationale of carbonizing ubiquitous organic species under energetic conditions. In addition, on-demand precursors pave the way for not only introducing dopants and surface functional groups into the carbon shell but also generating diverse metal-based nanoparticle cores. By controlling the synthetic parameters, both the carbon shell and the metallic core are facilely engineered in terms of structure, composition, and dimensions. Apart from multiple easy-to-understand superiorities, such as improved agglomeration, corrosion, oxidation, and pulverization resistance and charge conduction, afforded by the carbon encapsulation, potential core-shell synergistic interactions lead to the fine-tuning of the electronic structures of both components. These features collectively contribute to the emerging energy applications of these nanostructures as novel electrocatalysts and electrodes. Thus, a systematic and comprehensive review is urgently needed to summarize recent advancements and stimulate further efforts in this rapidly evolving research field.

Emerging Advances around Nanofluidic Transport and Mass Separation under Confinement in Atomically Thin Nanoporous Graphene

Membrane separation stands as an environmentally friendly, high permeance and selectivity, low energy demand process that deserves scientific investigation and industrialization. To address intensive demand, seeking appropriate membrane materials to surpass trade-off between permeability and selectivity and improve stability is on the schedule. 2D materials offer transformational opportunities and a revolutionary platform for researching membrane separation process. Especially, the atomically thin graphene with controllable porosity and structure, as well as unique properties, is widely considered as a candidate for membrane materials aiming to provide extreme stability, exponentially large selectivity combined with high permeability. Currently, it has shown promising opportunities to develop separation membranes to tackle bottlenecks of traditional membranes, and it has been of great interest for tremendously versatile applications such as separation, energy harvesting, and sensing. In this review, starting from transport mechanisms of separation, the material selection bank is narrowed down to nanoporous graphene. The study presents an enlightening overview of very recent developments in the preparation of atomically thin nanoporous graphene and correlates surface properties of such 2D nanoporous materials to their performance in critical separation applications. Finally, challenges related to modulation and manufacturing as well as potential avenues for performance improvements are also pointed out.

Borophene: Synthesis, Chemistry, and Electronic Properties

As a neighbor of carbon in the periodic table, boron exhibits versatile structural and electronic configurations, with its allotropes predicted to possess intriguing structures and properties. Since the experimental realization of two-dimensional (2D) boron sheets (borophene) on Ag(111) substrates in 2015, the experimental study of the realization and characteristics of borophene has drawn increasing interest. In this review, we summarize the synthesis and properties of borophene, which are mainly based on experimental results. First, the synthesis of borophene on different substrates, as well as borophane and bilayer borophene, featuring unique phases and properties, are discussed. Next, the chemistry of borophene, such as oxidation, hydrogenation, and its integration into heterostructures with other materials, is summarized. We also mention a few works focused on the physical properties of borophene, specifically its electronic properties. Lastly, the brief outlook addresses challenges toward practical applications of borophene and possible solutions.

Regulation of CC bonds in penta-graphene by oxidative functionalization: a prototype of penta-graphene oxide (PGO)

Penta-graphene (PG) is currently a research hotspot for carbon-based nanomaterials. Herein, we studied the effect of oxidative functionalization on the electric properties of PG by regulating the CC bond. Our results show that the chemical reactivity of the oxidative functionalized PG system is significantly enhanced due to the presence of the dangling bonds, which is achieved at the cost of reduced stability. The oxidative functionalized PG shows enhanced hydrophilicity, which is similar to graphene oxide (GO). More importantly, we found that the adsorption energy decreased gradually with the increase of oxidative functional group coverage, which indicated that hydrogen bonds (H-bonds) between the polarized groups could improve the stability of the oxidative functionalized PG. Finally, we discussed the ratio of carbon and oxygen to hydrogen in oxidative functionalized PG to provide theoretical guidance for experimental characterization. These findings are expected to provide deep insights into understanding the CC regulation in PG and rationally designing and preparing penta-graphene oxide (PGO).

High-Yield Large-Scale Suspended Graphene Membranes over Closed Cavities for Sensor Applications

Suspended membranes of monatomic graphene exhibit great potential for applications in electronic and nanoelectromechanical devices. In this work, a "hot and dry" transfer process is demonstrated to address the fabrication and patterning challenges of large-area graphene membranes on top of closed, sealed cavities. Here, "hot" refers to the use of high temperature during transfer, promoting the adhesion. Additionally, "dry" refers to the absence of liquids when graphene and target substrate are brought into contact. The method leads to higher yields of intact suspended monolayer chemical vapor deposition (CVD) graphene and artificially stacked double-layer CVD graphene membranes than previously reported. The yield evaluation is performed using neural-network-based object detection in scanning electron microscopy (SEM) images, ascertaining high yields of intact membranes with large statistical accuracy. The suspended membranes are examined by Raman tomography and atomic force microscopy (AFM). The method is verified by applying the suspended graphene devices as piezoresistive pressure sensors. Our technology advances the application of suspended graphene membranes and can be extended to other two-dimensional materials.

Hexagonal Boron Nitride Based Photonic Quantum Technologies

Hexagonal boron nitride is rapidly gaining interest as a platform for photonic quantum technologies, due to its two-dimensional nature and its ability to host defects deep within its large band gap that may act as room-temperature single-photon emitters. In this review paper we provide an overview of (1) the structure, properties, growth and transfer of hexagonal boron nitride; (2) the creationof colour centres in hexagonal boron nitride and assignment of defects by comparison with ab initio calculations for applications in photonic quantum technologies; and (3) heterostructure devices for the electrical tuning and charge control of colour centres that form the basis for photonic quantum technology devices. The aim of this review is to provide readers a summary of progress in both defect engineering and device fabrication in hexagonal boron nitride based photonic quantum technologies.

Probing Electrocatalytic Synergy in Graphene/MoS2/Nickel Networks for Water Splitting through a Combined Experimental and Theoretical Lens

The development of low-cost and active electrocatalysts signifies an important effort toward accelerating economical water electrolysis and overcoming the sluggish hydrogen or oxygen evolution reaction (HER or OER) kinetics. Herein, we report a scalable and rapid synthesis of inexpensive Ni and MoS2 electrocatalysts on N-doped graphene/carbon cloth substrate to address these challenges. Mesoporous N-doped graphene is synthesized by using electrochemical polymerization of polyaniline (PANI), followed by a rapid one-step photothermal pyrolysis process. The N-doped graphene/carbon cloth substrate improves the interconnection between the electrocatalyst and substrate. Consequently, Ni species deposited on an N-doped graphene OER electrocatalyst shows a low Tafel slope value of 35 mV/decade at an overpotential of 130 mV at 10 mA/cm2 current density in 1 M KOH electrolytes. In addition, Ni-doped MoS2 on N-doped graphene HER electrocatalyst shows Tafel slopes of 37 and 42 mV/decade and overpotentials of 159 and 175 mV, respectively, in acidic and alkaline electrolytes at 10 mA/cm2 current density. Both these values are lower than recently reported nonplatinum-group-metal-based OER and HER electrocatalysts. These excellent electrochemical performances are due to the high electrochemical surface area, a porous structure that improves the charge transfer between electrode and electrolytes, and the synergistic effect between the substrate and electrocatalyst. Raman spectroscopy, X-ray photoelectron spectroscopy, and density functional theory (DFT) calculations demonstrate that the Ni hydroxide species and Ni-doped MoS2 edge sites serve as active sites for OER and HER, respectively. Finally, we also evaluate the performance of the HER electrocatalyst in commercial alkaline electrolyzers.

Chemical Structure Evolution of Thermally Altered Coal during the Preparation of Coal-Based Graphene and Division of Thermally Altered Zone: Based on FTIR and Raman

A suite of coal samples near a diabase dike was collected to investigate the structural and functional group evolution of a series of carbon materials prepared from thermally altered coals, explore the influence of thermal metamorphism distance on the structure of coal and its carbon material products, and divide the thermally altered zones. Using Fourier transform infrared and Raman studies, it was found that after demineralization, the aromatic parameters f ar H and I of the coal structure slightly increase, while the aliphatic parameters CH2/CH3 and oxidation parameter 'C' slightly decrease, and the degree of order of the coal structure increases. Graphitization can greatly improve aromatic parameters, eliminate aliphatic structures, and enhance orderliness. However, after oxidation and reduction, the aromatic parameters and ordering degree of graphene decrease. Except for the sample closely attached to the dike, the coal-based graphene yield of the other samples first decreases and then stabilizes with the increase of distance from the dike, which is consistent with the trend of changes in the reflectance of raw coal. The thermally altered distance affects the structural changes of coal and carbon material products. The coal attached to the dike has been damaged and polluted, and the aromaticity and orderliness of the prepared carbon material products are relatively poor. The aromaticity and orderliness of coal-based products prepared from other thermally altered coals are relatively high and increase with the closer the thermally altered distance. Based on the characterized parameters of coal samples and products with distance from the dike, the sampling area is divided into four zones, including abnormally altered zone, normal altered zone, transition zone, and original coal zone. Among them, the yield and quality of coal-based graphene prepared from coal in the normal altered zone are the highest, an ideal raw material collection area for making coal-based graphene.

Graphene-skinned alumina fiber fabricated through metalloid-catalytic graphene CVD growth on nonmetallic substrate and its mass production

Graphene growth on widely used dielectrics/insulators via chemical vapor deposition (CVD) is a strategy toward transfer-free applications of CVD graphene for the realization of advanced composite materials. Here, we develop graphene-skinned alumina fibers/fabrics (GAFs/GAFFs) through graphene CVD growth on commercial alumina fibers/fabrics (AFs/AFFs). We reveal a vapor-surface-solid growth model on a non-metallic substrate, which is distinct from the well-established vapor-solid model on conventional non-catalytic non-metallic substrates, but bears a closer resemblance to that observed on catalytic metallic substrates. The metalloid-catalytic growth of graphene on AFs/AFFs resulted in reduced growth temperature (~200 °C lower) and accelerated growth rate (~3.4 times faster) compared to that obtained on a representative non-metallic counterpart, quartz fiber. The fabricated GAFF features a wide-range tunable electrical conductivity (1-15000 Ω sq-1), high tensile strength (>1.5 GPa), lightweight, flexibility, and a hierarchical macrostructure. These attributes are inherited from both graphene and AFF, making GAFF promising for various applications including electrical heating and electromagnetic interference shielding. Beyond laboratory level preparation, the stable mass production of large-scale GAFF has been achieved through a home-made roll-to-roll system with capacity of 468-93600 m2/year depending on product specifications, providing foundations for the subsequent industrialization of this material, enabling its widespread adoption in various industries.

Ultrasensitive detection of 5-hydroxymethylcytosine in genomic DNA using a graphene-based sensor modified with biotin and gold nanoparticles

Ten-eleven translocation (TET) proteins orchestrate deoxyribonucleic acid (DNA) methylation-demethylation dynamics by oxidizing 5-methylcytosine to 5-hydroxymethylcytosine (5hmC) and are frequently inactivated in various cancers. Due to the significance of 5hmC as an epigenetic biomarker for cancer diagnosis, pathogenesis, and treatment, its rapid and precise quantification is essential. Here, we report a highly sensitive electrochemical method for quantifying genomic 5hmC using graphene sheets that were electrochemically exfoliated and functionalized with biotin and gold nanoparticles (Bt-AuNPs) through a single-step electrical method. The attachment of Bt-AuNPs to graphene enhances the specificity of 5hmC-containing DNA and augments the oxidation of 5hmC to 5-formylcytosine in DNA. When coupled to a gold electrode, the Bt-AuNP-graphene-based sensor exhibits exceptional sensitivity and specificity for detecting 5hmC, with a detection limit of 63.2 fM. Furthermore, our sensor exhibits a remarkable capacity to measure 5hmC levels across a range of biological samples, including preclinical mouse tissues with varying 5hmC levels due to either TET gene disruption or oncogenic transformation, as well as human prostate cancer cell lines. Therefore, our sensing strategy has substantial potential for cancer diagnostics and prognosis.

Easy and Green Method to Fabricate Highly Thermally Conductive Poly(decamethylene terephthalamide)/Graphite Nanoplatelets Nanocomposite with Aligned Structure

With the development of miniaturization and integration of electrical and electronic equipment, the heat accumulation problems caused by the long-term operation of devices have become more and more serious. High thermal-conductivity and high-performance plastic composites have attracted significant interest from both academia and industry. Numerous studies have been recently conducted to enhance the thermal conductivity (TC) of nanofiller-filled polymeric composites. However, the homogeneous dispersion and directional arrangement of nanofillers in the resin matrix are the key factors limiting their effectiveness in enhancing thermal conductivity. Based on the feasibility considerations of mass production and industrial application, this paper reports on a novel preparation method of Poly(decamethylene terephthalamide)/graphite nanoparticle (GNP) nanocomposites with high thermal conductivity. Without borrowing solvents or other reagents, this method can effectively strip the inexpensive scaled graphite into nanoscale for its uniform dispersion and orientation arrangement by relying only on mechanical external forces. The whole technology is simple, green, and easy to industrialize. The fillers were well-dispersed and aligned in the PA10T, which played a role in significantly enhancing the thermal conductivity of the PA10T. In addition, we found that the thermal conductivity of the composites reached 1.20 W/(m·K) at 10 wt% filler content, which was 330% higher than that of the pure matrix. The mechanical properties of the composites were also significantly improved. This work provides guidance for the easy fabrication of thermally conductive composites with aligned structures.

Understanding epitaxial growth of two-dimensional materials and their homostructures

The exceptional physical properties of two-dimensional (2D) van der Waals (vdW) materials have been extensively researched, driving advances in material synthesis. Epitaxial growth, a prominent synthesis strategy, enables the production of large-area, high-quality 2D films compatible with advanced integrated circuits. Typical 2D single crystals, such as graphene, transition metal dichalcogenides and hexagonal boron nitride, have been epitaxially grown at a wafer scale. A systematic summary is required to offer strategic guidance for the epitaxy of emerging 2D materials. Here we focus on the epitaxy methodologies for 2D vdW materials in two directions: the growth of in-plane single-crystal monolayers and the fabrication of out-of-plane homostructures. We first discuss nucleation control of a single domain and orientation control over multiple domains to achieve large-scale single-crystal monolayers. We analyse the defect levels and measures of crystalline quality of typical 2D vdW materials with various epitaxial growth techniques. We then outline technical routes for the growth of homogeneous multilayers and twisted homostructures. We further summarize the current strategies to guide future efforts in optimizing on-demand fabrication of 2D vdW materials, as well as subsequent device manufacturing for their industrial applications.

Magnetized bentonite modified rice straw biochar: Qualitative and quantitative analysis of Cd(II) adsorption mechanism

Industrialization has caused a significant global issue with cadmium (Cd) pollution. In this study, Biochar (Bc), generated through initial pyrolysis of rice straw, underwent thorough mixing with magnetized bentonite clay, followed by activation with KOH and subsequent pyrolysis. Consequently, a magnetized bentonite modified rice straw biochar (Fe3O4@B-Bc) was successfully synthesized for effective treatment and remediation of this problem. Fe3O4@B-Bc not only overcomes the challenges associated with the difficult separation of individual bentonite or biochar from water, but also exhibited a maximum adsorption capacity of Cd(II) up to 241.52 mg g-1. The characterization of Fe3O4@B-Bc revealed that its surface was rich in C, O and Fe functional groups, which enable efficient adsorption. The quantitative calculation of the contribution to the adsorption mechanism indicates that cation exchange and physical adsorption accounted for 65.87% of the total adsorption capacity. In conclusion, Fe3O4@B-Bc can be considered a low-cost and recyclable green adsorbent, with broad potential for treating cadmium-polluted water.

Experimental demonstration of cyclotron emissions in micro-scale graphene structures

A solid-state implementation of a cyclotron radiation source consisting of arrays of semicircular geometries was designed, fabricated, and characterized on commercially available graphene on hBN substrates. Using a 10 µm design radius and device width, respectively, such devices were expected to emit a continuous band of radiation spanning from 3 to 6 GHz with a power 3.96 nW. A peak emission was detected at 4.15 GHz with an effective array gain of 22 dB. This is the first known experimental measurement of cyclotron radiation from a curved planar graphene geometry. With scaling, it may be possible achieve frequencies in the THz range with such a device.

Recent advances in batch production of transfer-free graphene

Large-area transfer-free graphene films prepared via chemical vapor deposition have proved appealing for various applications, with exciting examples in electronics, photonics, and optoelectronics. To achieve their commercialisation, batch production is a prerequisite. Nevertheless, the prevailing scalable synthesis strategies that have been reported are still obstructed by production inefficiencies and non-uniformity. There has also been a lack of reviews in this realm. We present herein a comprehensive and timely summary of recent advances in the batch production of transfer-free graphene. Primary issues and promising approaches for improving the graphene growth rate are first addressed, followed by a discussion of the strategies to guarantee in-plane and batch uniformity for graphene grown on planar plates and wafer-scale substrates, with the design of the target equipment to meet productivity requirements. Finally, potential research directions are outlined, aiming to offer insights into guiding the scalable production of transfer-free graphene.

Long-Range Uniform Deposition of Ag Nanoseed on Cu Current Collector for High-Performance Lithium Metal Batteries

Uniform lithium deposition is essential to hinder dendritic growth. Achieving this demands even seed material distribution across the electrode, posing challenges in correlating the electrode's surface structure with the uniformity of seed material distribution. In this study, the effect of periodic surface and facet orientation on seed distribution is investigated using a model system consisting of a wrinkled copper (Cu)/graphene structure with a [100] facet orientation. A new methodology is developed for uniformly distributed silver (Ag) nanoparticles over a large area by controlling the surface features of Cu substrates. The regularly arranged Ag nanoparticles, with a diameter of 26.4 nm, are fabricated by controlling the Cu surface condition as [100]-oriented wrinkled Cu. The wrinkled Cu guides a deposition site for spherical Ag nanoparticles, the [100] facet determines the Ag morphology, and the presence of graphene leads to spacings of Ag seeds. This patterned surface and high lithiophilicity, with homogeneously distributed Ag nanoparticles, lead to uniform Li+ flux and reduced nucleation energy barrier, resulting in excellent battery performance. The electrochemical measurements exhibit improved cyclic stability over 260 cycles at 0.5 mA cm-2 and 100 cycles at 1.0 mA cm-2 and enhanced kinetics even under a high current density of 5.0 mA cm-2.

Two-Step Conversion of Metal and Metal Oxide Precursor Films to 2D Transition Metal Dichalcogenides and Heterostructures

The widely studied class of two-dimensional (2D) materials known as transition metal dichalcogenides (TMDs) are now well-poised to be employed in real-world applications ranging from electronic logic and memory devices to gas and biological sensors. Several scalable thin film synthesis techniques have demonstrated nanoscale control of TMD material thickness, morphology, structure, and chemistry and correlated these properties with high-performing, application-specific device metrics. In this review, the particularly versatile two-step conversion (2SC) method of TMD film synthesis is highlighted. The 2SC technique relies on deposition of a solid metal or metal oxide precursor material, followed by a reaction with a chalcogen vapor at an elevated temperature, converting the precursor film to a crystalline TMD. Herein, the variables at each step of the 2SC process including the impact of the precursor film material and deposition technique, the influence of gas composition and temperature during conversion, as well as other factors controlling high-quality 2D TMD synthesis are considered. The specific advantages of the 2SC approach including deposition on diverse substrates, low-temperature processing, orientation control, and heterostructure synthesis, among others, are featured. Finally, emergent opportunities that take advantage of the 2SC approach are discussed to include next-generation electronics, sensing, and optoelectronic devices, as well as catalysis for energy-related applications.

Toward Clean 2D Materials and Devices: Recent Progress in Transfer and Cleaning Methods

Two-dimensional (2D) materials have tremendous potential to revolutionize the field of electronics and photonics. Unlocking such potential, however, is hampered by the presence of contaminants that usually impede the performance of 2D materials in devices. This perspective provides an overview of recent efforts to develop clean 2D materials and devices. It begins by discussing conventional and recently developed wet and dry transfer techniques and their effectiveness in maintaining material "cleanliness". Multi-scale methodologies for assessing the cleanliness of 2D material surfaces and interfaces are then reviewed. Finally, recent advances in passive and active cleaning strategies are presented, including the unique self-cleaning mechanism, thermal annealing, and mechanical treatment that rely on self-cleaning in essence. The crucial role of interface wetting in these methods is emphasized, and it is hoped that this understanding can inspire further extension and innovation of efficient transfer and cleaning of 2D materials for practical applications.

Wafer scale growth of single crystal two-dimensional van der Waals materials

Two-dimensional (2D) van der Waals (vdW) materials, including graphene, hexagonal boron nitride (hBN), and metal dichalcogenides (MCs), form the basis of modern electronics and optoelectronics due to their unique electronic structure, chemical activity, and mechanical strength. Despite many proof-of-concept demonstrations so far, to fully realize their large-scale practical applications, especially in devices, wafer-scale single crystal atomically thin highly uniform films are indispensable. In this minireview, we present an overview on the strategies and highlight recent significant advances toward the synthesis of wafer-scale single crystal graphene, hBN, and MC 2D thin films. Currently, there are five distinct routes to synthesize wafer-scale single crystal 2D vdW thin films: (i) nucleation-controlled growth by suppressing the nucleation density, (ii) unidirectional alignment of multiple epitaxial nuclei and their seamless coalescence, (iii) self-collimation of randomly oriented grains on a molten metal, (iv) surface diffusion and epitaxial self-planarization and (v) seed-mediated 2D vertical epitaxy. Finally, the challenges that need to be addressed in future studies have also been described.

Magnetoresistance properties in nickel-catalyzed, air-stable, uniform, and transfer-free graphene

A transfer-free graphene with high magnetoresistance (MR) and air stability has been synthesized using nickel-catalyzed atmospheric pressure chemical vapor deposition. The Raman spectrum and Raman mapping reveal the monolayer structure of the transfer-free graphene, which has low defect density, high uniformity, and high coverage (>90%). The temperature-dependent (from 5 to 300 K) current-voltage (I-V) and resistance measurements are performed, showing the semiconductor properties of the transfer-free graphene. Moreover, the MR of the transfer-free graphene has been measured over a wide temperature range (5-300 K) under a magnetic field of 0 to 1 T. As a result of the Lorentz force dominating above 30 K, the transfer-free graphene exhibits positive MR values, reaching ∼8.7% at 300 K under a magnetic field (1 Tesla). On the other hand, MR values are negative below 30 K due to the predominance of the weak localization effect. Furthermore, the temperature-dependent MR values of transfer-free graphene are almost identical with and without a vacuum annealing process, indicating that there are low density of defects and impurities after graphene fabrication processes so as to apply in air-stable sensor applications. This study opens avenues to develop 2D nanomaterial-based sensors for commercial applications in future devices.

Influence of Graphene-Based Nanocomposites in Neurogenesis and Neuritogenesis: A Brief Summary

Graphene is a prospective candidate for various biomedical applications, including drug transporters, bioimaging agents, and scaffolds for tissue engineering, thanks to its superior electrical conductivity and biocompatibility. The clinical issue of nerve regeneration and rehabilitation still has a major influence on people's lives. Nanomaterials based on graphene have been exploited extensively to promote nerve cell differentiation and proliferation. Their high electrical conductivity and mechanical robustness make them appropriate for nerve tissue engineering. Combining graphene with other substances, such as biopolymers, may transmit biochemical signals that support brain cell division, proliferation, and regeneration. The utilization of nanocomposites based on graphene in neurogenesis and neuritogenesis is the primary emphasis of this review. Here are some examples of the many synthetic strategies used. For neuritogenesis and neurogenesis, it has also been explored to combine electrical stimulation with graphene-based materials.

The structure of chemical vapor deposited graphene substrates for graphene-enhanced Raman spectroscopy

Defects and nanocrystalline grain structures play a critical role in graphene-enhanced Raman spectroscopy (GERS). In this study, we selected three types of few-layer, polycrystalline graphene films produced by chemical vapor deposition (CVD), and we tested them as GERS substrates. The graphene structure was controlled by decreasing the CVD temperature, thus obtaining (i) polycrystalline with negligible defect density, (ii) polycrystalline with high defect density, (iii) nanocrystalline. We applied rhodamine 6G as a probe molecule to investigate the Raman enhancement. Our results show that nanocrystalline graphene is the most sensitive GERS substrate, indicating that the GERS effect is primarily connected to the nanocrystalline structure, rather than to the presence of defects.

Laser-induced graphene on cross-linked sodium alginate

Laser-induced graphene (LIG) possesses desirable properties for numerous applications. However, LIG formation on biocompatible substrates is needed to further augment the integration of LIG-based technologies into nanobiotechnology. Here, LIG formation on cross-linked sodium alginate is reported. The LIG is systematically investigated, providing a comprehensive understanding of the physicochemical characteristics of the material. Raman spectroscopy, scanning electron microscopy with energy-dispersive x-ray analysis, x-ray diffraction, transmission electron microscopy, Fourier-transform infrared spectroscopy and x-ray photoelectron spectroscopy techniques confirm the successful generation of oxidized graphene on the surface of cross-linked sodium alginate. The influence of laser parameters and the amount of crosslinker incorporated into the alginate substrate is explored, revealing that lower laser speed, higher resolution, and increased CaCl2content leads to LIG with lower electrical resistance. These findings could have significant implications for the fabrication of LIG on alginate with tailored conductive properties, but they could also play a guiding role for LIG formation on other biocompatible substrates.

Graphene-based chemiresistive gas sensors

Gas sensors allow the monitoring of the chemical environment of humans, which is often crucial for their wellbeing or even survival. Miniaturization, reversibility, and selectivity are some of the key challenges for serial use of chemical sensors. This tutorial review describes critical aspects when using nanomaterials as sensing substrates for the application in chemiresistive gas sensors. Graphene has been shown to be a promising candidate, as it allows gas sensors to be operated at room temperature, possibly saving large amounts of energy. In this review, an overview is given on the general mechanisms for gas-sensitive semiconducting materials and the implications of doping and functionalization on the sensing parameters of chemiresistive devices. It shows in detail how different challenges, like sensitivity, response time, reversibility and selectivity have been approached by material development and operation modes. In addition, perspectives from the area of data analysis and intelligent algorithms are presented, which can further enhance these sensors' usability in the field.

Janus-Type Mixed-Valent Copper-Cyanido Honeycomb Layers

The synthesis of Janus-type layers, which possess front and back sides that consist of different structures, remains a major challenge in the field of two-dimensional materials. In this study, two Janus-type layered coordination polymers, namely, CuII(NEtH2)(NMe2H·H2O)CuI(CN)3 (1) and CuII(NMe2H)(NMe2H·H2O)CuI(CN)3 (2), were synthesized via a simple one-pot procedure using copper(II) nitrate and sodium cyanido in mixed solutions of dimethylamine and ethylamine. Uniquely, 1 and 2 were composed of cyanido-bridged neutral layers and exhibited a CuICuII mixed-valent state. Meanwhile, using a solution of pure dimethylamine for the synthesis yielded the monovalent three-dimensional framework (NMe2H2)[CuI2(CN)3] (3). Results indicated that the simultaneous use of two mixed amines gave rise to the controlled reduction of CuII ions during the reaction. In addition, each face of the layers was coordinated by different amines on the axial positions of the CuII sites, resulting in anisotropic Janus layers. Furthermore, the thermal expansion behavior of 2 was investigated, demonstrating that the neutral [CuICuII(CN)3] layer was relatively rigid compared with the analogous anionic [CuI2(CN)3]- layer.

Effect of nano-biodiesel blends on CI engine performance, emissions and combustion characteristics - Review

The situation of greenhouse gas emissions with the effect of severe decline in oil reserves and the increase in energy demand are among the alarming periods to be faced. For this reason, biodiesel is considered as an alternative that can be used in the transport sector. The main reason for this research is to review the Nano-biodiesel application in a diesel engine for the purpose of improving the fuel properties, combustion efficiency of the fuel and reducing the emission. This article critically and in-depth examines the impact of the different nano-biodiesel blends available, as well as highlighting their quality variations and their impact on engine outputs. The impact of Nano-metallic additives such as Al2O3, CeO2, CNTs, CuO, GO, TiO2 and others on fuel quality and combustion was analyzed. Selected and critically archived articles were reviewed. Significant enhancement is reported for nanoparticle-based disperse test fuels in term of brake thermal efficiency. Maximum improvement in BTE of up to 24.7 % with Jatropha biodiesel (B20) blend with 50 ppm Al2O3 nanoparticles was reported. Maximum percentage of 25 % reduction in BSFC was reported for Acacia concinna biodiesel blend with 150 TiO2. The maximum percentages of emission level reduction were 70.94 % for HC, 80 % for CO and 30 % for NOx for methyl ester of waste cooking oil (B10) blend with 100 ppm TiO, JB20 blend with 20 ppm Al2O3 and B10 blend with combined 30 ppm Al2O3 and 30 ppm CeO, respectively. Therefore, it is recommended to further investigate several combinations of biodiesel blends with different metallic oxide nanoparticles at different concentrations. According to the assessment, future studies may focus on hybrid nanoparticles, which are composed of two or more nanoparticles in order to overcome the limitations of nanoparticles to one component, by improving the properties of the nanoparticle, achieving new properties that cannot be obtained by single nanoparticles.

High-Throughput Mechanical Exfoliation for Low-Cost Production of van der Waals Nanosheets

A method is presented for scaling up the production of flakes of van der Waals materials via mechanical exfoliation. Using a roll-to-roll setup and an automatized, massive parallel exfoliation process, adhesive tapes with a high density of nanosheets of van der Waals materials are produced. The technique allows for obtaining a good trade-off between large lateral size and excellent area scalability, while also maintaining low cost. The potential of the method is demonstrated through the successful fabrication of field effect transistors and flexible photodetectors in large batches. This low-cost method to produce large area films out of mechanically exfoliated flakes is very general, and it can be applied to a variety of substrates and van der Waals materials and, moreover, it can be used to combine different van der Waals materials on top of each other. Therefore, it is believed that this production method opens an interesting avenue for fabrication of low-cost devices while maintaining a good scalability and performance.

High-Yield Synthesis of Sodium Chlorides of Unconventional Stoichiometries

Abnormal salt crystals with unconventional stoichiometries, such as Na2 Cl, Na3 Cl, K2 Cl, and CaCl crystals that have been explored in reduced graphene oxide membranes (rGOMs) or diamond anvil cells, hold great promise in applications due to their unique electronic, magnetic, and optical properties predicted in theory. However, the low content of these crystals, only <1% in rGOM, limits their research interest and utility in applications. Here, a high-yield synthesis of 2D abnormal crystals with unconventional stoichiometries is reported, which is achieved by applying negative potential on rGOM. A more than tenfold increase in the abnormal Na2 Cl crystals is obtained using a potential of -0.6 V, resulting in an atomic content of 13.4 ± 4.7% for Na on rGOM. Direct observations by transmission electron microscopy and piezoresponse force microscopy demonstrates a unique piezoelectric behavior arising from 2D Na2 Cl crystals with square structure. The output voltage increases from 0 to ≈180 mV in the broad 0-150° bending angle regime, which meets the voltage requirement of most nanodevices in realistic applications. Density functional theory calculations reveal that the applied negative potential of the graphene surface can strengthen the effect of the Na+ -π interaction and reduce the electrostatic repulsion between cations, making more Na2 Cl crystals formed.

Optimized time dependent exfoliation of graphite for fabrication of Graphene/GO/GrO nanocomposite based pseudo-supercapacitor

High capacitance devices (Supercapacitors) fabricated using two-dimensional materials such as Graphene and its composites are attracting great attention of the research community, recently. Synthesis of 2D materials and their composites with high quality is desirable for the fabrication of 2D materials-based supercapacitors. Ultrasonic Assisted Liquid Phase Exfoliation (UALPE) is one of the widely used techniques for the synthesis of graphene. In this article, we report the effect of variation in sonication time on the exfoliation of graphite powder to extract a sample with optimal properties well suited for supercapacitors applications. Three different graphite powders (hereafter termed as sample A, sample B, and sample C) were sonicated for duration of 24 h, 48 h and 72 h at 60 °C. The exfoliation of graphite powder into graphene, GO and GrO was studied using XRD and RAMAN. AFM and SEM were further used to examine the layered structure of the synthesized nanocomposite. UV-visible spectroscopy and cyclic voltammetery were used to measure the band gaps, and capacitive behavior of the samples. Sample B exhibited a remarkable specific capacitance of 534.53 F/g with charge specific capacity of 530.1 C/g at 1 A/g and energy density of 66 kW/kg. Power density varied 0.75 kWh/kg to 7.5 kWh/kg for a variation in current density from 1 to 10 A/g. Sample B showed capacitive retention of 94%, the lowest impedance and highest degree of exfoliation and conductivity as compared to the other two samples.

Scalable Synthesis of Carbon Nanomembranes from Amorphous Molecular Layers

Nanoporous carbon nanomembranes (CNMs) created by self-assembled monolayers ideally combine a high water flux and precise ion selectivity for molecular separation and water desalination. However, their practical implementation is often challenged by the availability of large epitaxial substrates, limiting the membrane up-scaling. Here, we report a scalable synthesis of CNMs from poly(4-vinylbiphenyl) (PVBP) spin-coated on SiO2/Si wafers. Electron irradiation of the amorphous PVBP molecular layers induces the formation of a continuous membrane with a thickness of 15 nm and a high density of subnanometer pores, providing a water permeance as high as 530 L m-2 h-1 bar-1, while repelling ions and molecules larger than 1 nm in size. A further introduction of a reinforced porous block copolymer layer enables the fabrication of centimeter-scale CNM composites that efficiently separate organic dyes from water. These results suggest a feasible route for large-scale nanomembrane fabrication.

Enhanced Mobility in Suspended Chemical Vapor-Deposited Graphene Field-Effect Devices in Ambient Conditions

High-field-effect mobility and the two-dimensional nature of graphene films make it an interesting material for developing sensing applications with high sensitivity and low power consumption. The chemical vapor deposition process allows for producing high-quality graphene films in a scalable manner. Considering the significant impact of the underlying substrate on the graphene device performance, methods to enhance the field-effect mobility are highly desired. This work demonstrates a simplified fabrication process to develop suspended, two-terminal chemical vapor deposition (CVD) graphene devices with enhanced field-effect mobility operating at room temperature. Enhanced hole field-effect mobility of up to ∼4.8 × 104 cm2/Vs and average hole mobility >1 × 104 cm2/Vs across all of the devices is demonstrated. A gradual increase in the width of the graphene device resulted in the increase of the full width at half-maximum (FWHM) of field-effect characteristics and a decrease in the field-effect mobility. Our work presents a simplified fabrication approach to realize high-mobility suspended CVD graphene devices, beneficial for developing CVD graphene-related applications.

Recent Understanding in the Chemical Vapor Deposition of Multilayer Graphene: Controlling Uniformity, Thickness, and Stacking Configuration

Multilayer graphene has attracted significant attention because its physical properties can be tuned by stacking its layers in a particular configuration. To apply the intriguing properties of multilayer graphene in various optoelectronic or spintronic devices, it is essential to develop a synthetic method that enables the control of the stacking configuration. This review article presents the recent progress in the synthesis of multilayer graphene by chemical vapor deposition (CVD). First, we discuss the CVD of multilayer graphene, utilizing the precipitation or segregation of carbon atoms from metal catalysts with high carbon solubility. Subsequently, we present novel CVD approaches to yield uniform and thickness-controlled multilayer graphene, which goes beyond the conventional precipitation or segregation methods. Finally, we introduce the latest studies on the control of stacking configurations in bilayer graphene during CVD processes.

Substrate-Selective Adhesion of Metal Nanoparticles to Graphene Devices

Nanostructured electronic devices, such as those based on graphene, are typically grown on top of the insulator SiO₂. Their exposure to a flux of small size-selected silver nanoparticles has revealed remarkably selective adhesion: the graphene channel can be made fully metallized, while the insulating substrate remains coverage-free. This conspicuous contrast derives from the low binding energy between the metal nanoparticles and a contaminant-free passivated silica surface. In addition to providing physical insight into nanoparticle adhesion, this effect may be of value in applications involving deposition of metallic layers on device working surfaces: it eliminates the need for masking the insulating region and the associated extensive and potentially deleterious pre- and postprocessing.

Synthesis of Solar Light Active Reduced Graphene Oxide-ZnS Nanomaterial for Photocatalytic Degradation and Antibacterial Applications

Good water quality is essential for life; therefore, decolorizing and detoxifying organic dye wastes (textile effluents) have gained immense environmental importance in recent years. Thus, the degradation of wastewater has become a potential need for our environment. This research aims to synthesize and investigate a ceramic-based nanomaterial catalyst for the degradation of dye solution under exposure to sunlight. A reduced graphene oxide-ZnS (rGO-ZnS) nanomaterial was qualitatively synthesized using a solvothermal method. The prepared nanomaterial was characterized using XRD, SEM, HR-TEM, EDX, XPS, and FT-IR techniques. The photocatalytic activity of the rGO-ZnS nanomaterial was checked using oxidative photocatalytic degradation of naphthol blue black dye (NBB) under direct sunlight irradiation. Here, the rGO/ZnS composite showed a significant photocatalytic performance to degraded NBB (93.7%) under direct solar light. Chemical Oxygen Demand (COD) measurements confirmed the mineralization of the dye. The influence of different radical scavengers on NBB degradation was studied. Optimum conditions for efficient degradation were determined. The antibacterial property of the prepared catalyst was studied.

Band Gap Engineering in Two-Dimensional Materials by Functionalization: Methylation of Graphene and Graphene Bilayers

Graphene is well-known for its unique combination of electrical and mechanical properties. However, its vanishing band gap limits the use of graphene in microelectronics. Covalent functionalization of graphene has been a common approach to address this critical issue and introduce a band gap. In this Article, we systematically analyze the functionalization of single-layer graphene (SLG) and bilayer graphene (BLG) with methyl (CH₃) using periodic density functional theory (DFT) at the PBE+D3 level of theory. We also include a comparison of methylated single-layer and bilayer graphene, as well as a discussion of different methylation options (radicalic, cationic, and anionic). For SLG, methyl coverages ranging from 1/8 to 1/1, (i.e., the fully methylated analogue of graphane) are considered. We find that up to a coverage θ of 1/2, graphene readily accepts CH₃, with neighbor CH₃ groups preferring trans positions. Above θ = 1/2, the tendency to accept further CH₃ weakens and the lattice constant increases. The band gap behaves less regularly, but overall it increases with increasing methyl coverage. Thus, methylated graphene shows potential for developing band gap-tuned microelectronics devices and may offer further functionalization options. To guide in the interpretation of methylation experiments, vibrational signatures of various species are characterized by normal-mode analysis (NMA), their vibrational density of states (VDOS), and infrared (IR) spectra, the latter two are obtained from ab initio molecular dynamics (AIMD) in combination with a velocity-velocity autocorrelation function (VVAF) approach.