Silver nanoparticles and polymeric medical devices: a new approach to prevention of infection?

Antimicrobial Coatings Based on Hybrid Iron Oxide Nanoparticles

This study presents the preparation of hybrid iron oxide nanocomposites through a two-step process combining microfluidic-assisted synthesis and post-synthetic surface modification. Fe3O4 nanoparticles were synthesized and simultaneously functionalized with salicylic acid using a three-dimensional vortex-type microfluidic chip, enabling rapid and uniform particle formation. The resulting Fe3O4/SA nanostructures were further modified with either silver or copper oxide to form iron oxide nanocomposites with enhanced antimicrobial functionality. These nanocomposites were subsequently integrated into silica aerogel matrices using a dip-coating approach to improve surface dispersion, structural stability, and biocompatibility. The structural and morphological properties of the samples were investigated using XRD, FT-IR, TEM with SAED analysis, and Raman microscopy. In vitro cytotoxicity and antimicrobial assays demonstrated that Fe3O4/SA-Ag and Fe3O4/SA-CuO exhibit potent antibacterial activity and cell type-dependent biocompatibility. In vivo biodistribution studies showed no accumulation in major organs and selective clearance via the spleen, validating the systemic safety of the platform. These findings highlight the potential of the synthesized nanocomposites as biocompatible, antimicrobial coatings for advanced biomedical surfaces.

Aspergillus fumigatus-induced biogenic silver nanoparticles' efficacy as antimicrobial and antibiofilm agents with potential anticancer activity: An in vitro investigation

A worldwide hazard to human health is posed by the growth of pathogenic bacteria that have contaminated fresh, processed, cereal, and seed products in storage facilities. As the number of multidrug-resistant (MDR) pathogenic microorganisms rises, we must find safe, and effective antimicrobials. The use of green synthesis of nanoparticles to combat microbial pathogens has gained a rising interest. The current study showed that Aspergillus fumigatus was applied as a promising biomass for the green synthesis of biogenic silver nanoparticles (Ag NPs). The UV-visible spectra of biosynthesized Ag NPs appeared characteristic surface plasmon absorption at 475 nm, round-shaped with sizes ranging from 17.11 to 75.54 nm and an average size of 50.37 ± 2.3 nm. In vitro tests were conducted to evaluate the antibacterial, antioxidant, and anticancer effects of various treatment procedures for Ag NP applications. The synthesized Ag NPs was revealed antimicrobial activity against Aspergillus flauvas, A. niger, Bacillus cereus, Candida albicans, Esherichia coli, Pseudomonas aerugonosa, and Staphylococcus aureus under optimum conditions. The tested bacteria were sensitive to low Ag NPs concentrations (5, 10, 11, 8, 7, 10, and 7 mg/mL) which was observed for the mentioned-before tested microorganisms, respectively. The tested bacterial pathogens experienced their biofilm formation effectively suppressed by Ag NPs at sub-inhibitory doses. Antibacterial reaction mechanism of Ag NPs were tested using scanning electron microscopy (SEM) to verify their antibacterial efficacy towards S. aureus and P. aeruginosa. These findings clearly show how harmful Ag NPs are to pathogenic bacteria. The synthesized Ag NPs showed antitumor activity with IC50 at 5 μg/mL against human HepG-2 and MCF-7 cellular carcinoma cells, while 50 mg/mL was required to induce 70 % of normal Vero cell mortality. These findings imply that green synthetic Ag NPs can be used on cancer cell lines in vitro for anticancer effect beside their potential as a lethal factor against some tested pathogenic microbes.

Tiny silver bullets: silver nanoparticles are insecticidal to Culicoides sonorensis (Diptera: Ceratopogonidae) biting midge larvae

Insecticide formulations with safer environmental profiles and limited off-target effects are desirable to manage medical and veterinary pests. Silver nanoparticles are insecticidal against mosquitos, nonbiting midges, and other insects. The biting midge, Culicoides sonorensis Wirth and Jones, is a vector of agriculturally important pathogens in much of the United States, and this study aimed to examine the insecticidal properties of silver nanoparticles in larvae of this species. Mortality of third-instar larvae was assessed daily for 7 days after exposure to concentrations of silver nanoparticles, sorghum polymer particles, and hybrid silver-sorghum polymer particles. Both silver nanoparticles and silver-sorghum polymer particles were insecticidal, but sorghum polymer particles alone did not significantly contribute to larval mortality. Concentrations of 100 mg/liter of silver nanoparticles achieved >50% mortality at day 7, and 200 mg/liter treatments achieved >75% larval mortality within 24 h. The antimicrobial properties of silver nanoparticles were also examined, and culturable bacteria were recovered from larval-rearing media at 200 mg/liter but not at 400 mg/liter of silver nanoparticles. These data suggest that C. sonorensis larval mortality is primarily caused by silver nanoparticle toxicity and not by the reduction of bacteria (i.e., a larval food source). This work describes the first use of silver nanoparticles in C. sonorensis and shows the potential insecticide applications of these nanoparticles against this agricultural pest. The grain-polymer particles also successfully carried insecticidal silver nanoparticles, and their utility in loading diverse compounds could be a novel toxin delivery system for biting midges and similar pests.

Anti-inflammatory action of silver nanoparticles in vivo: systematic review and meta-analysis

The aim of this study was to systematically review the literature to investigate whether silver nanoparticles (AgNPs) have an anti-inflammatory effect in vivo. The guidelines of PRISMA were applied, and a registration was made in PROSPERO. A personalized search of the PubMed, Web of Science, Scopus, Embase, Lilacs, and Google Scholar databases was conducted in September 2023. For the data analysis, the inverse variance in the random effects model was used. The tools of SYRCLE and GRADE were used to assess the risk of bias and the certainty of evidence, respectively. From the 9185 identified studies, 5685 duplicate studies were excluded; 52 were read in full text, and 7 were included in this review. Six studies were evaluated by the meta-analysis, and an increase in anti-inflammatory molecules (SMD -5.22; PI [-6.50, -3.94]) and an increase in anti-inflammatory ones (SMD 5.75; PI [3.79, 7.72]) were observed. Qualitative analysis showed a reduction in pro-inflammatory proteins and in the COX-2 pathway. It was concluded that AgNPs present an anti-inflammatory action in vivo through mechanisms involving the reduction of pro-inflammatory molecules and proteins, the increase of anti-inflammatory molecules, and selective inhibition of the COX-2 pathway.

Bio-inspired synthesis of silver nanoparticles usingSalsola imbricataand its application as antibacterial additive in glass ionomer cement

Nanotechnology has gained immense popularity and observed rapid development due to the remarkable physio-chemical properties of nanoparticles (NPs) and related nanomaterials. The green production of NPs has many benefits over traditional techniques because the current procedures are expensive, time-consuming, and involve harmful substances that limit their applicability. This study aimed to use a novel green source, theSalsola imbricata(SI) plant, which is commonly found in Central Asia and known for its medicinal properties as a reducing and stabilizing agent for the synthesis of AgNPs. The current study also utilized efficient statistical design, the Plackett-Burman Design (PBD) of Experiment method to synthesize the NPs. The characterization of NPs was carried out using UV-Vis spectroscopy, Fourier transform infrared spectroscopy, and scanning electron microscopy (SEM). The PBD results showed that only two out of four factorsi.e.AgNO3concentration and incubation time, were significant for the synthesis of SI-AgNPs. While remaining factors, incubation temperature and plant extract: AgNO3ratio were non-significant. The SEM analysis result showed that SI-AgNPs had a size of 20-50 nm. The SI-AgNPs demonstrated strong antibacterial activity against oral pathogens such asS. mutans and Lactobacillus acidophilus, with the highest efficacy observed at a concentration of 2 mg ml-1. The addition of SI-AgNPs in glass ionomer cement significantly increased the antibacterial activity of GIC againstS. mutans. Based on the results of the current study, the plant based AgNPs can be further evaluated in detail as alternate antimicrobial agent either alone or in combination with other antimicrobial agents for different dental applications.

Evaluating the antifungal effectiveness, leaching characteristics, flexural strength, and impact strength of polymethyl methacrylate added with small-scale silver nanoparticles - An in vitro study

AIM

(1) To assess the release of stable silver nanoparticles (AgNPs) of small scale dimension added to heat polymerized polymethyl methacrylate (PMMA) in 6 months. (2) Assessing the influence of incorporating minimal concentrations of stable AgNPs with nanoscale dimensions into heat polymerized PMMA over a 6 month period on its antifungal efficacy (AF), flexural strength (FS), and impact strength (IS).

SETTINGS AND DESIGN

Incorporating nanoparticles with a very small scale may have minimal impact on mechanical properties due to their diminutive size. However, the influence of these small scaled nanoparticles on antimicrobial efficacy and potential escalation in toxicity to host cells through leaching remains unexplored. AgNPs were prepared using an Ultrasonic Probe sonicator and the addition of ammonia to obtain stabilized AgNPs (< 0.01 nm) of small scale dimension. The characterization of these AgNPs involved ultraviolet visible spectroscopy, X ray diffraction, Zetasizer, and transmission electron microscopy with energy dispersive spectroscopy (TEM).

MATERIALS AND METHODS

The prepared AgNPs were then added in various percentages by weight (0%-0.5%) to fabricate 252 modified PMMA samples of sizes 10 mm × 3 mm (AF, n = 108), 65 mm × 10 mm × 3 mm (FS, n = 72), and 65 mm × 10 mm × 2.5 mm (IS, n = 72) as per ADA specification no. 12. These samples underwent testing for leaching out of AgNPs and efficacy against Candida albicans for 6 months. The effect on FS and IS was evaluated using the three point bending test and Charpy's Impact Tester, respectively.

STATISTICAL ANALYSIS USED

Intergroup comparison of CFU between various concentrations of AgNP was done using the Kruskal-Wallis ANOVA test succeeded by Mann-Whitney test for pair wise comparisons. Difference in CFU of various concentrations over 6 months was seen using one way ANOVA test. Intergroup comparison of FS and IS was performed using a one way ANOVA test, followed by a post hoc Tukey's test for pair wise comparisons.

RESULTS

Repeated tests showed no leaching out of AgNPs from the denture base resin into the storage medium. All concentrations of AgNPs incorporated in resin showed inhibition of Candida growth. Intergroup comparison of FS and IS revealed highly statistically significant differences (F = 15.076, P < 0.01 and F = 28.266, P < 0.01) between the groups showing a reduction in strength.

CONCLUSION

The AgNPs of small scale dimension incorporated into the denture base resin imparted a strong antifungal effectiveness against C. albicans, which did not decline during the study period and did not cause any release of nanoparticles. 0.5% showed the best antifungal efficacy. This may prove to be a viable and highly effective treatment for the prevention of Candida associated denture stomatitis. However, the inclusion of these particles resulted in a decrease in both FS and IS, and this reduction was directly proportional to the percentage of added AgNPs, with 0.5% demonstrating the least IS and FS.

Promising applications of phyto-fabricated silver nanoparticles: Recent trends in biomedicine

The prospective contribution of phyto-nanotechnology to the synthesis of silver nanomaterials for biomedical purposes is attracting increasing interest across the world. Green synthesis of silver nanoparticles (Ag-NPs) through plants has been extensively examined recently, and it is now seen to be a green and efficient path for future exploitation and development of practical nano-factories. Fabrication of Ag-NPs is the process involves use of plant extracts/phyto-compounds (e.g.alkaloids, terpenoids, flavonoids, and phenolic compounds) to synthesise nanoparticles in more economical and feasible. Several findings concluded that in the field of medicine, Ag-NPs play a major role in pharmacotherapy (infection and cancer). Indeed, they exhibits novel properties but the reason is unclear (except some theoretical interpretation e.g. size, shape and morphology). But recent technological advancements help to address these questions by predicting the unique properties (composition and origin) by characterizing physical, chemical and biological properties. Due to increased list of publications and their application in the field of agriculture, industries and pharmaceuticals, issues relating to toxicity are unavoidable and question of debate. The present reviews aim to find out the role of plant extracts to synthesise Ag-NPs. It provides an overview of various phytocompounds and their role in the field of biomedicine (antibacterial, antioxidant, anticancer, anti-inflammatory etc.). In addition, this review also especially focused on various applications such as role in infection, oxidative stress, application in medical engineering, diagnosis and therapy, medical devices, orthopedics, wound healing and dressings. Additionally, the toxic effects of Ag-NPs in cell culture, tissue of different model organism, type of toxic reactions and regulation implemented to reduce associated risk are discussed critically. Addressing all above explanations, this review focus on the detailed properties of plant mediated Ag-NPs, its impact on biology, medicine and their commercial properties as well as toxicity.

Increasing the Vase Life of Chrysanthemum Cut Flowers by Using Silver and Zinc Nanoparticles

Cut flowers are horticultural products that have great potential to be developed. Efforts to maintain quality and extend the shelf life of cut flowers are very important to obtain a product that is accepted in the market. The main problems of chrysanthemum cut flowers are the leaves easily turning yellow, wilting, and failure to fully open flowers. This study aimed to obtain the best pulsing solution formulation that increases vase life and maintains the freshness of chrysanthemum cut flowers. Pulsing solution treatment was carried out on chrysanthemum cut flowers during the evaluation period. Pulsing solution treatment consisted of control, AgNO3, nano-Ag (NAg), ZnO, and nano-Zn (NZn). The results showed that NAg20 treatment increased the vase life of chrysanthemum cut flowers up to 23 days, which was 19 days longer than the control. Nano-Ag inhibits bacterial growth, flower wilting, color degradation, and carotenoids. In addition, nano-Ag increased the size of the bloom-flower diameter. Considering the results of all postharvest quality parameters mentioned above, NAg20 extends the vase life of chrysanthemum cut flowers.

Designing Effective Antimicrobial Nanostructured Surfaces: Highlighting the Lack of Consensus in the Literature

Research into nanostructured materials, inspired by the topography of certain insect wings, has provided a potential pathway toward drug-free antibacterial surfaces, which may be vital in the ongoing battle against antimicrobial resistance. However, to produce viable antibacterial nanostructured surfaces, we must first understand the bactericidal mechanism of action and how to optimize them to kill the widest range of microorganisms. This review discusses the parameters of nanostructured surfaces that have been shown to influence their bactericidal efficiency and highlights the highly variable nature of many of the findings. A large-scale analysis of the literature is also presented, which further shows a lack of clarity in what is understood about the factors influencing bactericidal efficiency. The potential reasons for the ambiguity, including how the killing effect may be a result of multiple factors and issues with nonstandardized testing of the antibacterial properties of nanostructured surfaces, are then discussed. Finally, a standard method for testing of antimicrobial killing is proposed that will allow comparison between studies and enable a deeper understanding about nanostructured surfaces and how to optimize their bactericidal efficiency.

Silver Nanoparticles Synthesized Using Eichhornia crassipes Extract from Yuriria Lagoon, and the Perspective for Application as Antimicrobial Agent

The antimicrobial effects of silver (Ag) ions and salts are well known. However, the antimicrobial effects, mechanism, and the cytotoxic activity in vitro of Ag nanoparticles (AgNP) has recently been validated. In this work, we report the green synthesis of AgNPs using the extract of Eichhornia crassipes as a reducing agent and evaluate its antimicrobial activity against Escherichia coli (ATCC-25922). The morphology, size, chemical composition, and inhibition properties of the nanoparticles as a function of the reduction time and temperature were analyzed. According to TEM imaging, nanoparticles with average diameters between 20–40 nm were synthesized. Antibacterial results suggest that AgNPs can be used as an effective growth inhibitor with higher antimicrobial activity against Escherichia coli after 120 min of reaction with a synthesis temperature of 95°. More extensive analysis is required for the appropriate selection of the synthesis parameters and adequate concentration for use in biomedical applications and antibacterial control systems.

Novel Cellulose Nanocrystals-Based Polyurethane: Synthesis, Characterization and Antibacterial Activity

As a new type of polymer, water-driven polyurethane (PU) has attracted increasing attention of researchers; however, with the popularization of its application, the following infection problems limit their applications, especially in the biomedical field. Herein, a series of novel cellulose nanocrystals (CNCs)-based PUs were first synthesized by chemical cross-linking CNCs with triblock copolymer polylactide–poly (ethylene glycol)–polylactide (CNC-PU). After covalent binding with tannic acid (TA-CNC-PU), the silver nanoparticles (Ag NPs) were further introduced into the material by a reduction reaction (Ag/TA-CNC-PU). Finally, the prepared serial CNCs-based PU nanocomposites were fully characterized, including the microstructure, water contact angle, water uptake, thermal properties as well as antibacterial activity. Compared with CNC-PU, the obtained TA-CNC-PU and Ag/TA-CNC-PU were capable of lower glass transition temperatures and improved thermal stability. In addition, we found that the introduction of tannic acid and Ag NPs clearly increased the material hydrophobicity and antibacterial activity. In particular, the Ag/TA-CNC-PU had a better antibacterial effect on E. coli, while TA-CNC-PU had better inhibitory effect on S. aureus over a 24 h time period. Therefore, these novel CNCs-based PUs may be more beneficial for thermal processing and could potentially be developed into a new class of smart biomaterial material with good antibacterial properties by adjusting the ratio of TA or Ag NPs in their structures.

Effect of Silver Nitrate (AgNO3) and Nano-Silver (Ag-NPs) on Physiological Characteristics of Grapes and Quality during Storage Period

The aim of this study was to evaluate the effects of silver nitrate (AgNO3) and nano-silver (Ag-NPs) on the physiological and biochemical characteristics, and quality of grape bunches during a cold storage period. For investigations, two varieties of grapes were used, Shine Muscat and Kyoho, with different concentrations of AgNO3 and Ag-NPs on post-harvest dipping. The data indicated that AgNO3 and Ag-NPs enhanced the fruits’ longevity and quality. Depending on the data analysis, it was found that the lowest weight loss value was obtained from Ag-NP treated grapes, followed by AgNO3 treated grapes, while the highest loss occurred in the control grapes. Immersion of grape bunches in Ag-NPs was the best application for maintenance of overall storage quality for both cultivars. In the same trend, treatment with Ag-NPs produced the best results for soluble solids content (SSC), titratable acidity (TA), malondialdehyde (MDA) content, polyphenol oxidase (PPO), pyrogallol peroxidase (POD), and pectin methylestraese activity (PME). It was concluded that Ag-NPs and AgNO3 were helpful in maintaining the quality of grape bunches up to 30 days, while grape bunches under control conditions were spoiled with 30 days of cold storage.

Applying metal coatings to dielectric materials by photochemical processes

Photochemical processes in thin surface layers of solutions of compounds of the copper subgroup elements leading to the formation of dispersed metal particles on the surface of dielectrics are investigated. It is shown that dispersed particles of elemental gold are formed on dielectrics moistened with AuCl3 solution and exposed to sunlight. At the same time, there is no need to use any chemical reducing agents. On cotton fabrics moistened with solutions of AgNO3, CuBr2, when exposed to sunlight, silver and copper monohalides are formed, respectively. These processes take place with the participation of terminal cellulose molecules and also do not require the use of chemical reducing agents. In addition, it was found that copper monohalides can be converted into elemental copper particles by a photochemical reaction involving ascorbic acid. Examples of metallization of a number of dielectrics using photochemical activation using sunlight are given.

Accelerated Neutral Atom Beam (ANAB) Modified Poly-Ether-Ether-Ketone for Increasing In Vitro Bone Cell Functions and Reducing Bacteria Colonization Without Drugs or Antibiotics

Poly-ether-ether-ketone (PEEK) has become the spinal implant material of choice due to its radiolucency, low elastic modulus, manufacturability, and mechanical durability. However, studies have highlighted less that optimal cytocompatibility properties of conventional PEEK leading to decreased bone growth and/or extensive bacteria infection. In order to improve the surface properties of PEEK for orthopedic applications, here, Accelerated Neutral Atom Beam (ANAB) technology was used to modify PEEK and such samples were tested In Vitro for osteoblast (bone-forming cell) functions and bacterial colonization. Results showed significantly improved osteoblast responses (such as deposition of calcium containing mineral as well as alkaline phosphatase, osteocalcin, osteopontin, and osteonectin synthesis) on ANAB modified PEEK compared to controls due to optimized surface energy from nanostructured features and greater exposure of PEEK chemistry. ANAB treatment enhanced protein absorption (specifically, mucin, casein, and lubricin) to the PEEK surface and consequently significantly reduced bacterial (including methicillin resistant Staph. aureus (or MRSA), E. coli, and Staph. epidermidis) colonization. Collectively, this study introduces ANAB treated PEEK as a novel material that should be further studied for a wide range of improved orthopedic applications.

Antimicrobial Meshes for Hernia Repair: Current Progress and Perspectives

Recent advances in the development of biomaterials have given rise to new options for surgery. New-generation medical devices can control chemical breakdown and resorption, prevent post-operative adhesion, and stimulate tissue regeneration. For the fabrication of medical devices, numerous biomaterials can be employed, including non-degradable biomaterials (silicone, polypropylene, expanded polytetrafluoroethylene) or biodegradable polymers, including implants and three-dimensional scaffolds for tissue engineering, which require particular physicochemical and biological properties. Based on the combination of new generation technologies and cell-based therapies, the biocompatible and bioactive properties of some of these medical products can lead to progress in the repair of injured or harmed tissue and in tissue regeneration. An important aspect in the use of these prosthetic devices is the associated infection risk, due to the medical complications and socio-economic impact. This paper provides the latest achievements in the field of antimicrobial surgical meshes for hernia repair and discusses the perspectives in the development of these innovative biomaterials.

Wound Antiseptics and European Guidelines for Antiseptic Application in Wound Treatment

Issues arising in wound healing are very common, and chronic wound infections affect approximately 1.5% of the population. The main substances used in wound washing, cleansing and treatment are antiseptics. Today, there are many compounds with a known antiseptic activity. Older antiseptics (e.g., boric acid, ethacridine lactate, potassium permanganate, hydrogen peroxide, iodoform, iodine and dyes) are not recommended for wound treatment due to a number of disadvantages. According to the newest guidelines of the Polish Society for Wound Treatment and the German Consensus on Wound Antisepsis, only the following antiseptics should be taken into account for wound treatment: octenidine (OCT), polihexanide (PHMB), povidone-iodine (PVP-I), sodium hypochlorite (NaOCl) and nanosilver. This article provides an overview of the five antiseptics mentioned above, their chemical properties, wound applications, side effects and safety.

Phycocyanin, a super functional ingredient from algae; properties, purification characterization, and applications

Phycocyanins (PCYs) are a group of luxuriant bioactive compounds found in blue-green algae with an estimated global market of about US$250 million within this decade. The multifarious markets of PCYs noted by form (e.g. powder or aqueous forms), by grade (e.g. analytical, cosmetic, or food grades), and by application (such as biomedical, diagnostics, beverages, foods, nutraceuticals and pharmaceuticals), show that the importance of PCYs cannot be undermined. In this comprehensive study, an overview on PCY, its structure, and health-promoting features are diligently discussed. Methods of purification including chromatography, ammonium sulfate precipitation and membrane filtration, as well as characterization and measurement of PCYs are described. PCYs could have many applications in food colorants, fluorescent markers, nanotechnology, nutraceutical and pharmaceutical industries. It is concluded that PCYs offer significant potentials, although more investigations regarding its purity and safety are encouraged.

Synthesis, Characterisation and Antibacterial Properties of Silicone-Silver Thin Film for the Potential of Medical Device Applications

Silver (Ag) particles have sparked considerable interest in industry and academia, particularly for health and medical applications. Here, we present the “green” and simple synthesis of an Ag particle-based silicone (Si) thin film for medical device applications. Drop-casting and peel-off techniques were used to create an Si thin film containing 10–50% (v/v) of Ag particles. Electro impedance spectroscopy (EIS), X-ray diffraction analysis (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), and tensile tests were used to demonstrate the electrical conductivity, crystallinity, morphology-elemental, and mechanical properties, respectively. The oriented crystalline structure and excellent electronic migration explained the highest conductivity value (1.40 × 10⁻⁵ S cm⁻¹) of the 50% Ag–Si thin film. The findings regarding the evolution of the conductive network were supported by the diameter and distribution of Ag particles in the Si film. However, the larger size of the Ag particles in the Si film resulted in a lower tensile stress of 68.23% and an elongation rate of 68.25% compared to the pristine Si film. The antibacterial activity of the Ag–Si film against methicillin-resistant Staphylococcus aureus (MRSA), Bacillus cereus (B. cereus), Klebsiella pneumoniae (K. pneumoniae), and Pseudomonas aeruginosa (P. aeruginosa) was investigated. These findings support Si–Ag thin films’ ability to avoid infection in any medical device application.

An Amphiphilic Carbonaceous/Nanosilver Composite-Incorporated Urinary Catheter for Long-Term Combating Bacteria and Biofilms

Biofilms formed on urinary catheters remain a major headache in the modern healthcare system. Among the various kinds of biocide-releasing urinary catheters that have been developed to prevent biofilm formation, Ag nanoparticles (AgNPs)-coated catheters are of great promising potential. However, the deposition of AgNPs on the surface of catheters suffers from several inherent shortcomings, such as damage to the urethral mucosa, uncontrollable Ag ion kinetics, and unexpected systematic toxicity. Here, AgNPs-decorated amphiphilic carbonaceous particles (ACPs@AgNPs) with commendable dispersity in solvents of different polarities and broad-spectrum antibacterial activity are first prepared. The resulting ACPs@AgNPs exert good compatibility with silicone rubber, which enables the easy fabrication of urinary catheters using a laboratory-made mold. Therefore, ACPs@AgNPs not only endow the urinary catheter with forceful biocidal activity but also improve its mechanical properties and surface wettability. Hence, the designed urinary catheter possesses excellent capacity to resist bacterial adhesion and biofilm formation both in vitro and in an in vivo rabbit model. Specifically, a long-term antibacterial study highlights its sustainable antibacterial activity. Of note, no obvious toxicity or inflammation in rabbits was triggered by the designed urinary catheter in vivo. Overall, the hybrid urinary catheter may serve as a promising biocide-releasing urinary catheter for antibacterial and antibiofilm applications.

Bacteriostatic impact of nanoscale zero-valent iron against pathogenic bacteria in the municipal wastewater

Nanoscale zero-valent iron particles were investigated as an antibacterial agent against two Gram-positive bacteria; Staphylococcus aureus NRRL B-313 (S. aureus), Bacillus subtilus NRC (B. subtilus), and two Gram-negative bacteria; Escherichia coli NRC B-3703 (E. coli), Pseudomonas aeruginosa NRC B-32 (Ps. aeruginosa). The characterization of synthesized nZVI particles was obtained by XRD, SEM, EDX, and TG analyses. The results demonstrated that the nZVI particles have a spherical shape, mean crystalline size of 44.43 nm, and exhibited a good chemical and thermal stability performance under different physical conditions. The bacterial suspensions were subjected to the treatment using nZVI particle suspensions with a concentration of 10 mg/mL. The minimum inhibitory concentration of nZVI particles was determined using the well diffusion assay method and found to be 15, 10, 10, and 5 mg for the following four strains; S. aureus, B. subtilus, E. coli, and Ps. aeruginosa, respectively. The biological treatment results of municipal wastewater using nZVI particles revealed that the counts of total bacteria, total coliform, fecal coliform, S. aureus, fecal Streptococcus, and E. coli were decreased to 44.29%, 51.76%, 90.95%, 46.67%, 33.33%, and 93.89%, respectively, while the Ps. aeruginosa not detected in the wastewater sample. The enhanced inactivation performance of nZVI nanoparticles was mainly attributed to the reactive oxygen species (ROS) production, releasing of iron corrosion products like Fe²⁺/Fe³⁺ ions, and direct friction of nZVI particles with bacterial cells membranes. In addition, the nZVI particles presented a striking disinfection behavior in comparison with other widespread disinfection technologies such as chlorination. Accordingly, the obtained results introduce the nZVI particles as a promising disinfection technology.

Surface Minimal Bactericidal Concentration: A comparative study of active glasses functionalized with different-sized silver nanoparticles

In this work the quantification of antimicrobial properties of differently sized AgNPs immobilized on a surface was studied. Three different sizes of spheroidal AgNPs with a diameter of (6, 30 and 52) nm were synthetized and characterized with UV-vis, SEM, TEM and ICP-MS. The MIC (Minimal Inhibitory Concentration) and MBC (Minimal Bactericidal Concentration) against Escherichia coli were investigated. Then, the antibacterial efficacy (R) of amino-silanized glasses coated with different amounts of the three sizes of AgNPs were quantified by international standard ISO 22196 adapted protocol against E. coli, clarifying the relationship between size and antibacterial properties of immobilized AgNPs on a surface. The total amount of silver present on glasses with an R ∼ 6 for each AgNPs size was quantified with ICP-MS and this was considered the Surface MBC (SMBC), which were found to be (0.023, 0.026 and 0.034) μg/cm² for (6, 30 and 52) nm AgNPs, respectively. Thus, this study demonstrates that active surfaces with a bactericidal effect at least ≥ 99.9999 % could be obtained using an amount of silver almost 100 times lower than the MBC found for colloidal AgNPs. The immobilization reduces the aggregation phenomena normally occuring in liquid media, maximizing the exposed specific superficial area of the AgNPs and their direct contact with bacterial cells. Starting from this glass model system, our work could broaden the way to the development of a wide range of antibacterial materials with very low amount of silver that can be safely applied in biomedical and food packaging fields.

Promotion of Surgical Masks Antimicrobial Activity by Disinfection and Impregnation with Disinfectant Silver Nanoparticles

BACKGROUND

The COVID-19 pandemic is requesting highly effective protective personnel equipment, mainly for healthcare professionals. However, the current demand has exceeded the supply chain and, consequently, shortage of essential medical materials, such as surgical masks. Due to these alarming limitations, it is crucial to develop effective means of disinfection, reusing, and thereby applying antimicrobial shielding protection to the clinical supplies.

PURPOSE

Therefore, in this work, we developed a novel, economical, and straightforward approach to promote antimicrobial activity to surgical masks by impregnating silver nanoparticles (AgNPs).

METHODS

Our strategy consisted of fabricating a new alcohol disinfectant formulation combining special surfactants and AgNPs, which is demonstrated to be extensively effective against a broad number of microbial surrogates of SARS-CoV-2.

RESULTS

The present nano-formula reported a superior microbial reduction of 99.999% against a wide number of microorganisms. Furthermore, the enveloped H5N1 virus was wholly inactivated after 15 min of disinfection. Far more attractive, the current method for reusing surgical masks did not show outcomes of detrimental amendments, suggesting that the protocol does not alter the filtration effectiveness.

CONCLUSION

The nano-disinfectant provides a valuable strategy for effective decontamination, reuse, and even antimicrobial promotion to surgical masks for frontline clinical personnel.

Preparation of silver nanoparticles by solid-state redox route from hydroxyethyl cellulose for antibacterial strain sensor hydrogel

As a smart wearable sensor device, the mildew of the biocompatible hydrogel limits its application. In this paper, silver nanoparticles were prepared by solid-state reduction of hydroxyethyl cellulose and compounded into a chemically cross-linked hydrogel as an antibacterial, flexible strain sensor. Because the high surface energy of silver nanoparticles can quench free radicals, we designed three initiators to synthesize hydrogels: ammonium persulfate (APS), 2,2'-Azobis(2-methylpropionitrile) (AIBN) and 2,2'-azobis(2-methylpropionamidine) dihydrochloride (AIBA). Impressively, silver nanoparticles composite hydrogel could only be successfully fabricated and triggered by the AIBN. The mechanical property of the composite hydrogel (0.12 MPa at 704.33 % strain) was significantly improved because of dynamic crosslinking point by HEC. Finally, the composite hydrogels are applied to the field of antibacterial strain sensor and the highest Gauge Factor (GF) reached 4.07. This article proposes a novel, green and simple strategy for preparing silver nanoparticles and compounding them into a hydrogel system for antibacterial strain sensor.

Efficacy of incorporating silver nanoparticles into maxillofacial silicone against Staphylococcus aureus, Candida albicans, and polymicrobial biofilms

STATEMENT OF PROBLEM

The presence of biofilms on maxillofacial silicone increases the risk of infections and reduces durability. Whether silver nanoparticles (AgNPs) with potent antimicrobial effects help reduce biofilm formation is unclear.

PURPOSE

The purpose of this in vitro study was to assess the antimicrobial effect of sub 10-nm AgNPs in maxillofacial silicone against Staphylococcus aureus, Candida albicans, and mixed species biofilms containing both and to test the effectiveness of different AgNP concentrations against all 3 biofilms in vitro.

MATERIAL AND METHODS

Silicone disks (M511; Technovent Ltd) containing 0.0% (control), 0.1%, and 0.5% AgNPs were fabricated and treated with S. aureus, C. albicans, and mixed species strains of both in 24-well culture plates containing appropriate media. Each well received a 0.1-mL aliquot of the standardized suspension of microorganisms. The plates were incubated for 21 consecutive days, and colony-forming units per milliliter (CFU/mL) were measured on the first, third, fifth, seventh, fifteenth, and twenty-first day with the Miles and Misra method. Data were analyzed by 2-way ANOVA and the paired t test to evaluate the relationship between AgNP concentration, microbial strain, and time (α=.05). Mean CFU/mL differences for each time and for each biofilm category were assessed by repeated measure ANOVA.

RESULTS

AgNPs decreased the mean CFU/mL in both concentrations compared with the control. The 0.1% concentration showed sustained efficacy throughout the test, while the 0.5% concentration had high efficacy initially with a gradual decrease. However, the results were inconsistent for the mixed biofilm. The paired sample t test at day 3 and 15 and day 3 and 21 showed statistically significantly different results (P<.001) in all but 1 group in the 0.5% concentration. The 2-way mixed ANOVA showed statistically significant (P<.001) interaction between AgNP concentration and time in all groups. The 1-way ANOVA of AgNP concentrations was statistically significantly different (P<.001) for all time points. A statistically significant (P<.001) effect of time on CFU/mL was found for all the AgNP concentration groups in all 3 biofilms.

CONCLUSIONS

Silicone elastomers with sub 10-nm AgNPs displayed antimicrobial properties in vitro against S. aureus, C. albicans, and mixed species strains. AgNPs (0.1%) were effective against both microbial strains and can provide a baseline for further long-term studies regarding antimicrobial efficacy, silver ion leaching, and cellular internalization. Mixed species biofilm needs further exploration with standardized study parameters.

Synthesis, Characterization and Testing of Antimicrobial Activity of Composites of Unsaturated Polyester Resins with Wood Flour and Silver Nanoparticles

This paper presents the properties of the wood-resin composites. For improving their antibacterial character, silver nanoparticles were incorporated into their structures. The properties of the obtained materials were analyzed in vitro for their anti-biofilm potency in contact with aerobic Gram-positive Staphylococcus aureus and Staphylococcus epidermidis; and aerobic Gram-negative Escherichia coli and Pseudomonas aeruginosa. These pathogens are responsible for various infections, including those associated with healthcare. The effect of silver nanoparticles incorporation on mechanical and thermomechanical properties as well as gloss were investigated for the samples of composites before and after accelerating aging tests. The results show that bacteria can colonize in various wrinkles and cracks on the composites with wood flour but also the surface of the cross-linked unsaturated polyester resin. The addition of nanosilver causes the death of bacteria. It also positively influences mechanical and thermomechanical properties as well as gloss of the resin.

Antibacterial efficacy of facile cyanobacterial silver nanoparticles inferred by antioxidant mechanism

Nanoparticles (NPs) have gained importance in technological advances owing to their user friendly enhanced and efficient physical, chemical, and biological characteristics compared to their bulk counterparts. Biological synthesis of NPs by using a microorganism, enzymes, or plant extracts offers a greener and eco-friendly approach besides many advantages over physical or chemical approaches. This study reports the biosynthesis of silver nanoparticles (AgNPs) using Nostoc muscorum NCCU 442 aqueous extract as the reducing and capping agent for AgNPs synthesis. The synthesized nanoparticles were characterized by UV-VIS spectrum, SEM, EDS, TEM, AFM, DLS and XRD. Results showed distinguishing polycrystalline nature of synthesized AgNPs with surface plasmon significant band in the size range of 6-45nm with average 30 size nm. FT-IR study revealed the role of secondary metabolites present in aqueous extract for the synthesis of AgNPs. Biological activities of purified AgNPs as antioxidant and antibacterial potential showed the highest antibacterial activity against Staphylococcus aureus MTCC 902.

Phytosynthesis of Silver Nanoparticles Using Perilla frutescens Leaf Extract: Characterization and Evaluation of Antibacterial, Antioxidant, and Anticancer Activities

Purpose

The present study investigates the phytosynthesis of silver nanoparticles (AgNPs) using Perilla frutescens leaf extract, which acts as a reducing agent for the conversion of silver ions (Ag+) into AgNPs. P. frutescens leaf synthesized AgNPs (PF@AgNPs) were evaluated for biomedical properties including antibacterial, antioxidant and anticancer activities.

Materials and Methods

PF@AgNPs were synthesized using P. frutescens leaf extract and silver nitrate solution. The morphology and physical properties of PF@AgNPs were studied by spectroscopic techniques including, UV-Vis, FTIR, TEM, XRD, DLS, and TGA. Antibacterial activity of PF@AgNPs was evaluated by disk diffusion assay. Antioxidant activity of PF@AgNPs was checked by 2.2-diphenyl-1-picrylhydrazyl (DPPH), and 2.2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) free radical scavenging assays. Anticancer activity of PF@AgNPs was checked by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide assay. Cytotoxic effects of PF@AgNPs on most susceptible cancer cell lines were observed by phase contrast microscopy.

Results

PF@AgNPs showed surface plasmon resonance peak at 461 nm. XRD pattern showed that the PF@AgNPs were face-centered cubic crystals with a mean size of 25.71 nm. TEM analysis revealed the different shapes (spherical, rhombic, triangle, and rod) of PF@AgNPs. Zeta potential value (-25.83 mV) indicated that PF@AgNPs were long-term stable and not agglomerated. A low polydispersity index value (0.389) indicated the monodispersity of PF@AgNPs. TGA revealed the high thermal stability of PF@AgNPs. PF@AgNPs exhibited maximum inhibition against Escherichia coli, followed by Bacillus subtilis and Staphylococcus aureus. PF@AgNPs showed maximum inhibition of 68.02 and 62.93% against DPPH and ABTS-free radicals, respectively. PF@AgNPs showed significant anticancer activity against human colon cancer (COLO205) and prostate adenocarcinoma (LNCaP). PF@AgNPs exhibited apoptotic effects on LNCaP cells including cell shrinkage, membrane blebbing, chromatin condensation, fragmentation of nuclei, and formation of apoptotic bodies.

Conclusion

The present study reports the successful synthesis of PF@AgNPs using P. frutescens leaf extract. The synthesized PF@AgNPs are FCC crystals, monodispersed, long-term stable, and non-agglomerated. The observed antibacterial, antioxidant, and anticancer activities demonstrate the potential biomedical applications of PF@AgNPs.

Nanoparticle-Based Devices in the Control of Antibiotic Resistant Bacteria

Antimicrobial resistance (AR) is one of the most important public health challenges worldwide as it represents a serious complication that is able to increase the mortality, morbidity, disability, hospital stay and economic burden related to infectious diseases. As such, the spread of AR–pathogens must be considered as an emergency, and interdisciplinary approaches must be undertaken in order to develop not only drugs, but holistic strategies to undermine the epidemic and pathogenic potentials of multi-drug resistant (MDR) pathogens. One of such approaches has focused on the use of antimicrobial nanoparticles (ANPs), as they have demonstrated to possess strong antimicrobial effects on MDR pathogens. On the other hand, the ability of bacteria to develop resistance to such agents is minimal. In this way, ANPs may seem a good choice for the development of new drugs, but there is no certainty about their safety, which may delay its translation to the clinical setting. As MDR pathogens are quickly becoming more prevalent and drug development is slow and expensive, there is an increasing need for the rapid development of new strategies to control such agents. We hereby explore the possibility of designing ANP-based devices such as surgical masks and fabrics, wound dressings, catheters, prostheses, dentifrices, water filters, and nanoparticle-coated metals to exploit the potential of such materials in the combat of MDR pathogens, with a good potential for translation into the clinical setting.

Highly Efficient Antimicrobial Activity of CuxFeyOz Nanoparticles against Important Human Pathogens

The development of innovative antimicrobial materials is crucial in thwarting infectious diseases caused by microbes, as drug-resistant pathogens are increasing in both number and capacity to detoxify the antimicrobial drugs used today. An ideal antimicrobial material should inhibit a wide variety of bacteria in a short period of time, be less or not toxic to normal cells, and the fabrication or synthesis process should be cheap and easy. We report a one-step microwave-assisted hydrothermal synthesis of mixed composite Cu_xFe_yO_z (Fe₂O₃/Cu₂O/CuO/CuFe₂O) nanoparticles (NPs) as an excellent antimicrobial material. The 1 mg/mL Cu_xFe_yO_z NPs with the composition 36% CuFeO₂, 28% Cu₂O and 36% Fe₂O₃ have a general antimicrobial activity greater than 5 log reduction within 4 h against nine important human pathogenic bacteria (including drug-resistant bacteria as well as Gram-positive and Gram-negative strains). For example, they induced a >9 log reduction in Escherichia coli B viability after 15 min of incubation, and an ~8 log reduction in multidrug-resistant Klebsiella pneumoniae after 4 h incubation. Cytotoxicity tests against mouse fibroblast cells showed about 74% viability when exposed to 1 mg/mL Cu_xFe_yO_z NPs for 24 h, compared to the 20% viability for 1 mg/mL pure Cu₂O NPs synthesized by the same method. These results show that the Cu_xFe_yO_z composite NPs are a highly efficient, low-toxicity and cheap antimicrobial material that has promising potential for applications in medical and food safety.

Disinfection of contaminated metal implants with an Er:YAG laser

Infections related to orthopedic procedures are considered particularly severe when implantation materials are used, because effective treatments for biofilm removal are lacking. In this study, the relatively new approach for infection control by using an erbium:yttrium-aluminum-garnet (Er:YAG) laser was tested. This laser vaporizes all water containing cells in a very effective, precise, and predictable manner and results in only minimal thermal damage. For preliminary testing, 42 steel plates and 42 pins were seeded with mixed cultures. First, the minimally necessary laser energy for biofilm removal was determined. Subsequently, the effectiveness of biofilm removal with the Er:YAG laser and the cleansing of the metal implants with octenidine-soaked gauze was compared. Then, we compared the effectiveness of biofilm removal on 207 steel pins from 41 patients directly after explantation. Sonication and scanning electron microscopy were used for analysis. Laser fluences exceeding 2.8  J/cm² caused a complete extinction of all living cells by a single-laser impulse. Cleansing with octenidine-soaked gauze and irradiation with the Er:YAG laser are both thoroughly effective when applied to seeded pins. In contrast, when explanted pins with fully developed biofilms were analyzed, we found a significant advantage of the laser procedure. The Er:YAG laser offers a secure, complete, and nontoxic eradication of all kinds of pathogens from metal implants without damaging the implant and without the possible development of resistance. The precise noncontact removal of adjacent tissue is a decisive advantage over conventional disinfectants. Therefore, laser irradiation could become a valuable method in every debridement, antibiotics, and implant retention procedure.

Metal-based nanoparticles for bone tissue engineering

Tissue is vital to the organization of multicellular organisms, because it creates the different organs and provides the main scaffold for body shape. The quest for effective methods to allow tissue regeneration and create scaffolds for new tissue growth has intensified in recent years. Tissue engineering has recently used some promising alternatives to existing conventional scaffold materials, many of which have been derived from nanotechnology. One important example of these is metal nanoparticles. The purpose of this review is to cover novel tissue engineering methods, paying special attention to those based on the use of metal-based nanoparticles. The unique physiochemical properties of metal nanoparticles, such as antibacterial effects, shape memory phenomenon, low cytotoxicity, stimulation of the proliferation process, good mechanical and tensile strength, acceptable biocompatibility, significant osteogenic potential, and ability to regulate cell growth pathways, suggest that they can perform as novel types of scaffolds for bone tissue engineering. The basic principles of various nanoparticle-based composites and scaffolds are discussed in this review. The merits and demerits of these particles are critically discussed, and their importance in bone tissue engineering is highlighted.

Polyurethane-Based Coatings with Promising Antibacterial Properties

In coatings technology, the possibility of introducing specific characteristics at the surface level allows for the manufacture of medical devices with efficient and prolonged antibacterial properties. This efficiency is often achieved by the use of a small amount of antibacterial molecules, which can fulfil their duty while limiting eventual releasing problems. The object of this work was the preparation and characterization of silver, titanium dioxide and chitosan polyurethane-based coatings. Coatings with the three antibacterials were prepared using different deposition techniques, using a brush or a bar coater automatic film applicator, and compared to solvent casted films prepared with the same components. For silver containing materials, an innovative strategy contemplating the use and preparation of silver nanoparticles in a single step-method was employed. This preparation was obtained starting from a silver precursor and using a single compound as the reducing agent and stabilizer. Ultraviolet-visible spectroscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, contact angle measurements and adhesion test experiments were used to characterize the prepared coatings. Promising antibacterial properties, measured via direct and indirect methods, were registered for all the silver-based materials.

Dye degradation, antimicrobial and larvicidal activity of silver nanoparticles biosynthesized from Cleistanthus collinus

The present study aimed in green synthesis and characterization of silver nanoparticles (AgNPs) using the leaves of Cleistanthus collinus. The NPs showed various absorption peaks between 3402 cm-1 and 1063 cm-1. FTIR spectrum revealed the presence of OH group, alkene, aromatic hydrocarbon, aliphatic fluro compound and aliphatic chloro compounds. Scanning electron microscopic analysis revealed the particle size ranged from 30 to 50 nm. The biosynthesized NPs have potent activity against Shigella dysentriae, Staphylococcus aureus and Bacillus subtilis and the zone of inhibition was 21 ± 1, 20 ± 2, 16 ± 2 mm, respectively. Toxicity of the synthesized NPs was tested on green gram (Vigna radiata) seed at various concentrations (20-100%) and germination was induced by NPs treated seeds. Shoot length and root length was higher in NPs treated plant than control plant (p < 0.01). Elevated level of catalase (CAT) and superoxide dismutase (SOD) and about 13% CAT and 7% SOD activity registered than control. Superoxide dismutase activity of root and shoot varied based on the dosage of AgNPs (p < 0.01). Also, the NPs (1%) showed significant larvicidal activity on Aedes aegypti and 100% mortality was achieved after 24 h treatment. The green synthesized NPs reduced methylene blue and 4-nitrophenol significantly (p < 0.01). The colouration of methylene blue and 4-nitrophenol were considerably reduced after 60 min showed the potential of dye degrading ability.

Emerging Standards and Analytical Science for Nanoenabled Medical Products

Development and application of nanotechnology-enabled medical products, including drugs, devices, and in vitro diagnostics, are rapidly expanding in the global marketplace. In this review, the focus is on providing the reader with an introduction to the landscape of commercially available nanotechnology-enabled medical products as well as an overview of the international documentary standards and reference materials that support and facilitate efficient regulatory evaluation and reliable manufacturing of this diverse group of medical products. We describe the materials, test methods, and standards development needs for emerging medical products. Scientific and measurement challenges involved in the development and application of innovative nanoenabled medical products motivate discussion throughout this review.

Flacourtia indica based biogenic nanoparticles: development, characterization, and bioactivity against wound associated pathogens

Surface engineered nanoparticles (NPs) are of great attention due to their targeted medical applications. The nature of the functionalized surface plays a vital role in achieving the required functionalities of engineered NPs. Owing to the biofilm formation capabilities of wound associated pathogens, impaired wound healing is a major complication in the medical field. In this context, herein, we report the biogenic synthesis of Flacourtia indica (FI) based NPs, i.e., FI-AgNPs using the aqueous leaf extract of this anti-bacterial herb. The newly developed FI-AgNPs were characterized using various analytical and imaging techniques such as UV-Vis spectroscopy, Fourier transform infrared spectroscopy (FT-IR), powder X-ray diffraction (PXRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The FI-AgNPs showed potent anti-microbial activity and anti-biofilm potential which were examined through a test tube adherence method and congo red agar method. It has been observed that synthesized FI-AgNPs inhibit the formation of a biofilm of observed bacteria, even at a minimum concentration of 80 μgml−1. These findings suggest that synthesized FI-AgNPs could be used against wound associated microbes, especially bacterial coating on medical devices, to prevent antibiotic-resistant biofilm infections. Further development and research are obligatory to decode this skill into preventive and therapeutic strategies.