Prediction Modeling and Mapping of Groundwater Fluoride Contamination throughout India

For about the past eight decades, high concentrations of naturally occurring fluoride have been detected in groundwater in different parts of India. The chronic consumption of fluoride in high concentrations is recognized to cause dental and skeletal fluorosis. We have used the random forest machine-learning algorithm to model a data set of 12 600 groundwater fluoride concentrations from throughout India along with spatially continuous predictor variables of predominantly geology, climate, and soil parameters. Despite only surface parameters being available to describe a subsurface phenomenon, this has produced a highly accurate prediction map of fluoride concentrations exceeding 1.5 mg/L at 1 km resolution throughout the country. The most affected areas are the northwestern states/territories of Delhi, Gujarat, Haryana, Punjab, and Rajasthan and the southern states of Andhra Pradesh, Karnataka, Tamil Nadu, and Telangana. The total number of people at risk of fluorosis due to fluoride in groundwater is predicted to be around 120 million, or 9% of the population. This number is based on rural populations and accounts for average rates of groundwater consumption from nonmanaged sources. The new fluoride hazard and risk maps can be used by authorities in conjunction with detailed groundwater utilization information to prioritize areas in need of mitigation measures.

The risk of cancer as a result of elevated levels of nitrate in drinking water and vegetables in Central India

The objective of the present study was to determine the effect of nitrates on the incidence of gastrointestinal (GI) cancer development. Nitrate converted to nitrite under reducing conditions of gut results in the formation of N-nitrosamines which are linked to an increased gastric cancer risk. A population of 234 individuals with 78 cases of GI cancer and 156 controls residing at urban and rural settings in Nagpur and Bhandara districts of India were studied for 2 years using a case-control study. A detailed survey of 16 predictor variables using Formhub software was carried out. Nitrate concentrations in vegetables and primary drinking water supplies were measured. The logistic regression model showed that nitrate was statistically significant in predicting increasing risk of cancer when potential confounders were kept at base level (P value of 0.001 nitrate in drinking water; 0.003 for nitrate in vegetable) at P < 0.01. Exposure to nitrate in drinking water at >45 mg/L level of nitrate was associated with a higher risk of GI cancers. Analysis suggests that nitrate concentration in drinking water was found statistically significant in predicting cancer risk with an odds ratio of 1.20.

Nitrate in drinking water and vegetables: intake and risk assessment in rural and urban areas of Nagpur and Bhandara districts of India

The study focuses on the estimation of health risk from nitrate present in the drinking water and vegetables in Nagpur and Bhandara districts in the state of Maharashtra, India. Drinking water samples from 77 locations from the rural as well as urban areas and 22 varieties of vegetable were collected and analyzed for the presence of nitrate for a period of 1 year (two seasons). The daily intake of nitrate from these water and vegetable samples was then computed and compared with standard acceptable intake levels to assess the associated health risk. The mean nitrate concentration of 59 drinking water samples exceeded the Bureau of Indian Standards limit of 45 mg/L in drinking water. The rural and urban areas were found to have mean nitrate concentration in drinking water as 45.69 ± 2.08 and 22.53 ± 1.97 mg/L, respectively. The estimated daily intake of drinking water samples from 55 study sites had nitrate concentration far below the safety margin indicating serious health risk. The sanitation survey conducted in 12 households reported contaminated source with positive E. coli count in 20 samples as the major factor of health risk. The average nitrate concentration was maximum in beetroot (1349.38 mg/kg) followed by spinach (1288.75 mg/kg) and amaranthus (1007.64 mg/kg). Among the samples, four varieties of the vegetables exceeded the acceptable daily intake (ADI) with an assumption of 0.5 kg consumption of vegetables for an average of a 60-kg individual. Therefore, irrigation of these locally grown vegetables should be monitored periodically for nitrogen accumulation by the crop above the ADI limit. The application of nitrogenous fertilizers should also be minimized in the rural areas to help protect the nitrate contamination in groundwater sources.

Assessment of deterioration in water quality from source to household storage in semi-urban settings of developing countries

This study has investigated the common risks associated with the water quality changes from the source to the consumer households and the associated disease burden in the piped water supplies. Samples from the source to the household storage from Nagpur City were collected and analysed for heavy metals, nutrient and microbial parameters. Sanitary risks were identified at the households during the socio-economic and sanitary survey. The water quality deterioration was the most at household storage around 30.3% indicating that measures need to be taken to safeguard the water quality at the consumer level. Then, 31.2% of the samples collected from public standposts and handpumps were positive for faecal contamination which implies that it is the weaker sections of the society who suffer the consequences of drinking unsafe water the most. On the basis of the laboratory results, risk analysis by surveying the WTPs, point-of-use behaviour at households and sanitary status at different socio-economic strata, the Water Safety Plan for Nagpur City was structured. The aim was to ensure that safe and improved water is reached to the individual household.

How safe are the global water coverage figures? Case study from Madhya Pradesh, India

The World Health Organization (WHO)/United Nations Children's Fund (UNICEF) Joint Monitoring Programme (JMP) for Water Supply and Sanitation was designed to provide reference figures for access in individual countries to safe water. The JMP is based on non-administrative or nongovernment data from national-level surveys such as the Multiple Indicator Clusters Survey (MICS) or Demographic Health Survey. In the 2007 JMP report, India is noted to have water supply coverage of 89% (95% in urban areas and 85% in rural areas) compared to the Government of India estimates of 95%. The central state of Madhya Pradesh is noted by the Government of India to have coverage of 60%. However, the definition of access to safe water currently does not consider the quality or safety of the water being consumed. This paper, therefore, presents results from the application of a statistical tool (random multiple cluster technique-termed Rapid Assessment of Drinking Water Quality [RADWQ]) to Indore Zone in Madhya Pradesh. When results provided by the RADWQ technique are compared to the JMP MICS data, coverage levels reported in the JMP are reduced by up to 40% due to the high risk of microbiological (thermotolerant coliforms) contamination. In Indore Zone, the coverage of safe water reduced from 42% to 25% through the inclusion of the water safety parameters. The study recommends the inclusion of water quality/safety data in reported data under the UNICEF/WHO JMP.

Arsenic exposure from drinking water and staple food (rice): A field scale study in rural Bengal for assessment of human health risk

Arsenic is a well-known carcinogen with emerging reports showing a range of health outcomes even for low to moderate levels of exposure. This study deals with arsenic exposure and associated increased lifetime cancer risk for populations in arsenic-endemic regions of rural Bengal, where arsenic-safe drinking water is being supplied at present. We found a median total exposure of inorganic arsenic to be 2. 9 μg/Kg BW/day (5th and 95th percentiles were 1.1 μg/Kg BW/day and 7.9 μg/Kg BW/day); with major contribution from cooked rice intake (2.4 µg/Kg BW/day). A significant number of households drank arsenic safe water but used arsenic-rich water for rice cooking. As a result, 67% participants had inorganic arsenic intake above the JEFCA threshold value of 3 μg/Kg BW/day for cancer risk from only rice consumption when arsenic contaminated water was used for cooking (median: 3.5 μg/Kg BW/day) compared to 29% participants that relied on arsenic-free cooking water (median: 1.0 µg/kg BW/day). Arsenic in urine samples of study participants ranged from 31.7 to 520 µg/L and was significantly associated with the arsenic intake (r = 0.76); confirming the preponderance of arsenic exposure from cooked rice. The median arsenic attributable cancer risks from drinking water and cooked rice were estimated to be 2.4 × 10-5 and 2.7 × 10-4 respectively, which further emphasized the importance of arsenic exposure from staple diet. Our results show that any mitigation strategy should include both drinking water and local staple foods in order to minimize the potential health risks of arsenic exposure.

Lab scale study on electrocoagulation defluoridation process optimization along with aluminium leaching in the process and comparison with full scale plant operation

An excess or lack of fluoride in drinking water is harmful to human health. Desirable and permissible standards of fluoride in drinking water are 1.0 and 1.5 mg/L, respectively, as per Indian drinking water quality standards i.e., BIS 10500, 1991. In this paper, the performance of an electro-coagulation defluoridation batch process with aluminium electrodes was investigated. Different operational conditions such as fluoride concentration in water, pH and current density were varied and performance of the process was examined. Influence of operational conditions on (i) electrode polarization phenomena, (ii) pH evolution during electrolysis and (iii) the amount of aluminium released (coagulant) was investigated. Removal by electrodes is primarily responsible for the high defluoridation efficiency and the adsorption by hydroxide aluminium floc provides secondary effect. Experimental data obtained at optimum conditions that favored simultaneous mixing and flotation confirmed that concentrations lower than 1 mg/L could be achieved when initial concentrations were between 2 and 20 mg/L. pH value was found to be an important parameter that affected fluoride removal significantly. The optimal initial pH range is between 6 and 7 at which effective defluoridation and removal efficiencies over 98% were achieved. Furthermore, experimental results prominently displayed that an increase in current density substantially reduces the treatment duration, but with increased residual aluminium level. The paper focuses on pilot scale defluoridation process optimization along with aluminium leaching and experimental results were compared with a full-scale plant having capacity of 600 liter per batch.

Access to Household Water Quality Information Leads to Safer Water: A Cluster Randomized Controlled Trial in india

Household-specific feedback on the microbiological safety of drinking water may result in changes to water management practices that reduce exposure risks. We conducted a randomized, controlled trial in India to determine if information on household drinking water quality could change behavior and improve microbiological quality as indicated by Escherichia coli counts. We randomly assigned 589 participating households to one of three arms: (1) a messaging-only arm receiving messaging on safe water management ( n = 237); (2) a standard testing arm receiving the same messaging plus laboratory E. coli testing results specific to that household's drinking water ( n = 173); and (3) a test kit arm receiving messaging plus low-cost E. coli tests that could be used at the household's discretion ( n = 179). Self-reported water treatment increased significantly in both the standard testing arm and the test kit arm between baseline and follow-up one month later. Mean log₁₀ E. coli counts per 100 mL in household stored drinking water increased in the messaging-only arm from 1.42 to 1.87, while decreasing in the standard testing arm (1.38 to 0.89, 65% relative reduction) and the test kit arm (1.08 to 0.65, 76% relative reduction). Findings indicate that household-specific water quality information can improve both behaviors and drinking water quality.

A Review of Recently Developed LC-MS/MS Methods for the Analysis of Pharmaceuticals and Personal Care Products in Water

BACKGROUND

Pharmaceuticals and personal care products (PPCPs) are present in the environment in trace concentrations. These compounds may cause health hazards to human beings and animals. The concerns related to their existence has led to development of a number of sensitive, accurate, and robust analytical methods.

OBJECTIVE

This article aims to review the recently developed chromatography-MS-based methods for the analysis of PPCPs in varied aqueous matrices and also presents a brief overview of the current status of PPCPs in the Indian aquatic environment.

METHODS

It demonstrates existing and recent trends in sampling, sample preparation techniques, and instrumentation methods for estimation of PPCPs in water.

RESULTS

Solid-phase extraction is found to be the most commonly used sample preparation technique, and LC-tandem MS (MS/MS; with electrospray ionization) is the most extensively used instrumentation technique for the analysis of PPCPs.

CONCLUSIONS

The analytical methods reviewed here provide a detailed overview of the procedures for detection and quantification of PPCPs in water. These methods are useful for monitoring these compounds in environmental matrices and facilitate risk assessment studies.

HIGHLIGHTS

This paper reviews the analytical methods for estimation of PPCPs in aquatic environmental matrices and presents their comprehensive evaluation.

Safe greywater reuse to augment water supply and provide sanitation in semi-arid areas of rural India

Water reuse is recognized as a tool to increase water supply in peri-urban areas of semi-arid and arid regions of the world. However, it is an option rarely explored for rural areas in developing countries, and has not been documented extensively in the scientific literature. This paper presents results from 6 greywater reuse systems which were built with the objective to augment water supply and to provide sanitation in rural low income areas of Madhya Pradesh, India. The systems are based on reclaiming greywater from bathing for the use in toilet flushing and kitchen garden irrigation. The reuse systems were implemented based on the scientific rationale presented in the WHO (2006) guidelines. The paper presents evidence from the operation and evaluation of the greywater treatment plants under field conditions between 2005 and 2008. The paper concludes that greywater is a highly cost effective solution for water scarcity. In this study, reusing greywater resulted in a 60% increase in water availability, a reduction in open defecation and a fourfold increase in food availability.

Microbial water quality improvement associated with transitioning from intermittent to continuous water supply in Nagpur, India

Nearly half a billion people living in Indian cities receive their drinking water from an intermittent water supply (IWS), which can be associated with degraded water quality and risk of waterborne disease. The municipal water supply in Nagpur, India is transitioning from intermittent to continuous supply in phases. We conducted cross-sectional sampling to compare microbial water quality under IWS and continuous water supply (CWS) in Nagpur. In 2015 and 2017, we collected 146 grab samples and 90 large-volume dead-end ultrafiltration (DEUF) samples (total volume: 6,925 liters). In addition to measuring traditional water quality parameters, we also assayed DEUF samples by droplet digital PCR (ddPCR) for waterborne pathogen gene targets. At household taps served by IWS, we detected targets from enterotoxigenic E. coli, Shigella spp./enteroinvasive E. coli, norovirus GI and GII, adenovirus A-F, Cryptosporidium spp., and Giardia duodenalis. We observed a significant increase in the proportion of grab samples positive for culturable E. coli (p = 0.0007) and DEUF concentrates positive for waterborne pathogen gene targets (p = 0.0098) at household taps served by IWS compared to those served by CWS. IWS continues to be associated with fecal contamination, and, in this study, with increased prevalence of molecular evidence of waterborne pathogens. These findings add mounting evidence that, despite the presence of piped on premise infrastructure, IWS is less likely to meet the requirements for safely-managed drinking water as defined by the Sustainable Development Goals. Importantly, these findings demonstrate the transition from IWS to CWS in Nagpur is yielding meaningful improvements in microbial water quality.

Trihalomethanes in developed and developing countries

The reactions between natural organic matter, anthropogenic contaminants, ions, and disinfectants lead to the formation of disinfection by-products (DBPs) such as trihalomethanes (THMs) in drinking water. The formation of THMs is strongly related to the chlorination of water. The study's central objective was to compare the concentration of THMs in twenty developed and developing countries and their disinfection techniques. The THM concentration in 11 developed and 9 developing countries ranged from 0.5 µg/L (Germany) to 215 µg/L (Russia) and 3 µg/L (China) to 439.2 µg/L (Bangladesh), respectively. The developed country has partially succeeded in reducing THM concentration in drinking water, whereas significant steps are needed in developing countries to reduce the existing high THM concentration. The concentration of THMs in water varies among these countries because of the different water sources, water quality, environmental conditions, and efficiency of water treatment technologies. A meaningful relationship has been observed between the properties of water and the THM formation. The use of chemical disinfectants will result in new forms of DBPs that are undesirable due to their carcinogenic and mutagenic effects on human health. The DBP guidelines by various national and international agencies have helped to control and manage the THM concentration in drinking water. However, these regulatory standards are not continuously monitored. Therefore, the formation of these compounds should be prevented either by removing THMs forming precursors or by using an integrated approach for controlling THM formation by implementing advanced water treatment technology. Extensive research is desirable in domains like THM minimization strategies which are easy to deploy, scalable, and cost-effective.

Design and development of sustainable remediation process for mitigation of fluoride contamination in ground water and field application for domestic use

Decentralised household chemo defluoridation unit (CDU) was developed and designed based on a combination of coagulation and sorption processes. Chemo-defluoridation process was optimised to reduce use of chemicals and increase acceptability among beneficiaries without affecting palatability of water. Chemical dose optimization undertaken in the laboratory using jar test revealed the optimum calcium salt to initial fluoride ratio of 60 for fluoride removal. Performance of CDU was evaluated in the laboratory for removal efficiency, water quality parameters, filter bed cleaning cycle and desorption of fluoride. CDU evaluation in the laboratory with spiked water (5 mg/L) and field water (~4.2 mg/L) revealed treated water fluoride concentration of less than 1mg/L. Seventy five CDUs were installed in households at Sakhara Village, Yavatmal District in Maharashtra State of India. Monthly monitoring of CDUs for one year indicated reduction of the raw water fluoride concentration from around 4 mg/L to less than 1mg/L. Post implementation survey after regular consumption of treated drinking water by the users for one year indicated user satisfaction and technological sustainability.

Development and field testing of low-cost, quantal microbial assays with volunteer reporting as scalable means of drinking water safety estimation

AIMS

To evaluate a low-cost water quality test for at-scale drinking water safety estimation in rural India.

METHODS AND RESULTS

Within a longitudinal study to characterize variability in household drinking water safety in rural Maharashtra, we piloted a low-cost presence-absence (LCPA) microbial test designed to be used by volunteer residents in rural areas. In comparing the LCPA results with standard laboratory methods for enumeration of Escherichia coli, we found that LCPA tests using modified mTec media were highly sensitive in detecting drinking water of moderate risk (88% of tests were positive at E. coli counts of 11-100 CFU per 100 ml) and high risk (96% of tests were positive at E. coli counts of 101 + CFU per 100 ml). The LCPA tests demonstrated low specificity for E. coli specifically, due to concurrent detection of Klebsiella: 38% of LCPA tests were positive even when E. coli was not detected in a 100 ml sample by membrane filtration, suggesting the test would be conservative in risk estimation. We also found that 47% of participants in rural villages in India were willing to conduct tests and return results after a brief training, with 45% of active participants sending their water testing results via short message service.

CONCLUSIONS

Given their low cost (~US$0.50 as piloted) and open-source format, such tests may provide a compelling alternative to standard methods for rapid water quality assessments, especially in resource-limited settings.

SIGNIFICANCE AND IMPACT OF THE STUDY

The lack of availability of water quality data constrains efforts to monitor, evaluate and improve the safety of water and sanitation infrastructure in underserved settings. Current water testing methods are not scalable because of laboratory and cost constraints. Our findings indicate the LCPA or similar low-cost microbial tests could be useful in rapid water safety estimation, including via crowdsourcing.

A comprehensive physico-chemical, mineralogical and morphological characterization of Indian mineral wastes

This paper provides a comprehensive characterization of mineral waste such as fly ash, bottom ash, slag and construction demolition (C&D) collected from four different thermal power plants, three steel plants and three C&D waste generation sites in India. To determine utilisation potential and environmental concerns, as received fly ash, bottom ash, slag and C&D waste were analysed for physico-chemical, mineralogical and morphological properties. The physico-chemical properties analysed include pH, moisture content, acid insoluble residue, loss on ignition(LOI), carbon content, fineness, chloride content, sulphate content, reactive silica content, XRF and heavy metal analysis. Morphological and mineralogical characteristics were investigated using scanning electron microscopy-energy dispersive X-ray. Particle size distribution was obtained using particle size analyser. The material analysed has different compositions and were selected with a view to determine their suitability for different applications in cement and concrete industry and for further research studies.

Arsenic remediation from drinking water using Fenton's reagent with slow sand filter

This paper describes the development of a remediation approach based on the pre-oxidation using Fenton's reagent and the subsequent removal of arsenic (As) through sand filtration from drinking water. The efficiency of the process was carried out including As(III) and As(V) with various concentration ratios up to 3,000 ppb. Efficient removal of As was observed within WHO guideline value of 10 ppb. The recoveries of samples were found to be 98 % ± 2.5 %. The process was applied to field samples, where results show considerable reduction in As concentrations. This process is cost effective for treatment of drinking water with high concentration of As.

Evaluation of pathogen risks using QMRA to explore wastewater reuse options: A case study from New Delhi in India

Selecting appropriate reuse for treated wastewater is a challenge. The current investigation outlines the utilization of quantitative microbial risk assessment (QMRA) to assist Effluent Treatment Plant (ETP) management to determine the best-possible reuse of treated wastewater from 11 ETPs in Delhi. Four representative pathogens: pathogenic Escherichia coli spp., Salmonella spp., Cryptosporidium spp. and Giardia spp. were selected to characterize microbial water quality. Reuse options selected based on the survey and interaction with ETP managers include crop irrigation, garden irrigation, toilet flush and industrial applications. The probability of infection was characterized for two exposure groups: workers and children. Water quality monitoring indicates the occurrence of pathogenic E. coli spp. (100%), Salmonella spp. (63%), Cryptosporidium spp. (81%) and Giardia spp. (45%) in the treated wastewater. QMRA reveals the annual median-probability of infection above acceptable limits for pathogenic E. coli spp., Cryptosporidium spp. and Salmonella spp. The probabilities of Giardia-associated infections were low. Adults showed a 1.24 times higher probability of infection compared to children. Sensitivity analysis indicated pathogen concentration as the most critical factor. The study highlights that the existing plans for chlorination-based treatment technology may prove insufficient in reducing the risk for selected reuse options; but, alternate on-site control measures and up-grading water reuse protocol may be effective.

Management of cyanobacteria and cyanotoxins in drinking water: A comprehensive review on occurrence, toxicity, challenges and treatment approaches

The synergistic effects of increased anthropogenic activities and climate change have intensified the frequency of cyanobacterial blooms in surface water bodies. These blooms pose significant health risks to humans and animals due to the release of cyanotoxins into the water. Conventional drinking water treatment plants (DWTPs) are often ineffective in removing cyanobacterial cells due to challenges such as electrostatic repulsion, hydrophilicity, and buoyancy. While excessive pre-oxidation can remove cyanobacteria, it may cause cell lysis, increase cyanotoxin concentration, and surpass various regulatory guidelines, posing additional risks of forming disinfection by-products (DBPs). Moderate pre-oxidation presents a viable alternative by effectively removing intact cyanobacterial cells. This review comprehensively analyses the occurrence, toxicity, associated challenges faced by DWTPs, and treatment approaches for cyanobacteria. Various moderate pre-oxidation processes for enhancing coagulation efficiency while preserving cell integrity are systematically summarized and critically discussed. The review also highlights the importance of holistic multi-barrier approaches, including prevention, corrections measures and water intake management for managing cyanobacterial contamination in drinking water treatment. It underscores the need for intensive research to develop affordable and effective solutions to ensure sustainable and safe drinking water provision.

Identification of environmental stress parameters to study the natural colour change of water in highly saline inland Crater Lake at Lonar, India

Lonar Lake is a highly saline inland water body created by a crater in Maharashtra, India. A rare occurrence of the colour change of lake water from green to brown and eventually to pinkish-red was observed in Lonar in June 2020. This phenomenon attracted the attention of researchers, academicians and interestingly legal fraternity to understand the causes of colour change. The literature studies coupled the phenomenon of colouration of water to three aspects: the presence of halophilic Halobacterium salinarum or an algal species of Dunaliella (Dunaliella salina) or oxidization of metals (Fe and Mn) present in water. A comprehensive study was done to understand and assess the change in the colour of Lonar Lake water. The green colour of the lake is primarily due to the dominance of chlorophyll-a pigment in the algae population. The stressed condition in June 2020 adversely affected the photosynthesis activity of Dunaliella sp. resulting in the red colouration of the species. This red colour of Dunaliella sp. is due to the formation of a pigment named carotenoid which is similar to that in halophilic bacteria. This pigment completely hides the green chloroplast, and water turns pinkish-red. This study describes detailed investigations of environmental and climatic parameters to determine possible causes of abiotic stress on the algae population of the lake. The major factors contributing to the stressed conditions are high dissolved solids, alkalinity and alkaline pH due to salts in the lake water due to evaporation losses and limited rainfall over the months. The study further verified whether the colour change is a cyclic event and predicted possible lake conditions for the event of colour change to occur in the future.