Release of gentamicin and vancomycin from preformed spacers in infected total hip arthroplasties: measurement of concentrations and inhibitory activity in patients' drainage fluids and serum

Gentamicin (G) and vancomycin (V) concentrations in drainage fluids obtained from patients during the first 24 hours after implantation of antibiotic-loaded polymethylmethacrylate (PMMA) spacers in two-stage revision of infected total hip arthroplasty were studied. The inhibitory activity of drainage fluids against different multiresistant clinical isolates was investigated as well. Seven hips were treated by implantation of industrial G-loaded spacers. Vancomycin was added by manually mixing with PMMA bone cement. Serum and drainage fluid samples were collected 1, 4, and 24 hours after spacer implantation. Antibiotics concentrations and drains bactericidal titer of combination were determined against multiresistant staphylococcal strains. The release of G and V from PMMA cement at the site of infection was prompt and effective. Serum levels were below the limit of detection. The local release kinetics of G and V from PMMA cement was similar, exerting a pronounced, combined inhibitory effect in the implant site. The inhibitory activity of drainage fluids showed substantial intersubject variability related to antibiotic concentrations and differed according to the pathogens tested. Gentamicin and vancomycin were released from temporary hip spacers at bactericidal concentrations, and their use in combination exerted strong inhibition against methicillin-resistant S. aureus and Coagulase Negative Staphylococci strains.

Acetabular reconstruction with the Burch-Schneider antiprotrusio cage and bulk allografts: minimum 10-year follow-up results

Reconstruction of severe pelvic bone loss is a challenging problem in hip revision surgery. Between January 1992 and December 2000, 97 hips with periprosthetic osteolysis underwent acetabular revision using bulk allografts and the Burch-Schneider antiprotrusio cage (APC). Twenty-nine patients (32 implants) died for unrelated causes without additional surgery. Sixty-five hips were available for clinical and radiographic assessment at an average follow-up of 14.6 years (range, 10.0 to 18.9 years). There were 16 male and 49 female patients, aged from 29 to 83 (median, 60 years), with Paprosky IIIA (27 cases) and IIIB (38 cases) acetabular bone defects. Nine cages required rerevision because of infection (3), aseptic loosening (5), and flange breakage (1). The average Harris hip score improved from 33.1 points preoperatively to 75.6 points at follow-up (P < 0.001). Radiographically, graft incorporation and cage stability were detected in 48 and 52 hips, respectively. The cumulative survival rates at 18.9 years with removal for any reason or X-ray migration of the cage and aseptic or radiographic loosening as the end points were 80.0% and 84.6%, respectively. The use of the Burch-Schneider APC and massive allografts is an effective technique for the reconstructive treatment of extensive acetabular bone loss with long-lasting survival.

Incidence of heterotopic ossification after surface and conventional total hip arthroplasty: a comparative study using anterolateral approach and indomethacin prophylaxis

The incidence and severity of heterotopic ossification (HO) in two homogeneous groups of patients that received surface replacement arthroplasty (SRA) and conventional total hip arthroplasty (THA) were evaluated retrospectively. Thirty-nine patients undergoing 42 hip resurfacing procedures and 41 primary cementless THAs through an anterolateral approach received a 10-day course of 150 mg/die of indomethacin postoperatively. The median surgical time was 190 minutes and 156 minutes, respectively (P < 0.003). At a minimum 1-year followup, the development of HO was assessed on standard X-ray using Brooker grading. Ectopic bone formation was detected in five cases (11.9%, two Brooker grade I and three grade II) in the SRA group and in 14 hips (34.1%, 12 grade I and two grade II) treated with conventional THA, but the difference was not significant (P < 0.11). No clinically relevant periprosthetic ossification (Brooker III or IV) occurred in both groups. Although the difference was not statistically significant, the incidence of HO after SRA was lower than conventional THA. More extensive soft tissue trauma, bone debris, and longer operative time in hip resurfacing are not likely to be absolute risk factors for HO. Further investigations including larger patient populations are needed to confirm these findings.

Stem modularity alone is not effective in reducing dislocation rate in hip revision surgery

BACKGROUND

Dislocation is a serious complication following total hip arthroplasty (THA). Femoral revision using monoblock components has been associated with high incidence of subsidence and dislocation. Advantages of modular stems in THA have long been debated. The aim of this retrospective study is to assess the capability of an uncemented modular stem in decreasing the incidence of early dislocation subsequent to revision THA.

MATERIALS AND METHODS

We evaluated the dislocation rate during the first 2 years following revision surgery in two groups of patients who were treated by implantation of a cementless tapered femoral prosthesis; a standard-modularity stem (Wagner SL) and an increased-modularity stem (Profemur R) were used, respectively, in 66 hips (group I, 64 patients) and 102 hips (group II, 97 patients). Group I consisted of 47 females and 17 males with average age of 66 years (range 29-84 years). Group II included 60 females and 37 males with average age of 70 years (range 48-89 years).

RESULTS

Dislocation occurred in six hips (9.1%) of group I and in seven hips (6.8%) of group II (P = 0.401). Dislocations were observed early in both groups, except one hip in group II that dislocated 434 days postoperatively and required surgical reduction. All other dislocations were treated by closed reduction. No recurrence was observed.

CONCLUSIONS

The use of an increased-modularity revision stem alone did not prove to be effective in reducing the risk of postoperative dislocation.

Tissue-sparing surgery in total hip arthroplasty: sensible approaches and tested evidence

Minimally invasive total hip arthroplasty was advocated as a surgical procedure resulting in a faster functional recovery when compared with standard-length incision approaches. Currently, the potential benefits of low-surgical dissection are still unproven in well-designed clinical trials. Undoubtedly, smaller incisions and less soft tissue injury than in conventional arthroplasty should be promoted, according to the concept of tissue-sparing surgery. The advantages associated with less invasive surgical procedures must be evaluated carefully against the technical concerns that have the potential to adversely affect primary total hip arthroplasty outcome.

Open patellar tendon avulsion from tibial tuberosity after ACL reconstruction successfully treated with suture anchors

Patellar tendon rupture after anterior cruciate ligament (ACL) reconstruction is a rare complication which usually occurs in the early postoperative period during rehabilitation. The management of open avulsions from tibial tuberosity has not been clearly defined yet. We describe a previously unreported case of traumatic and open patellar tendon avulsion from tibial tuberosity one year following ACL reconstruction in an elite football player which was successfully treated with suture anchors.

Dislocation of primary total hip arthroplasty: Analysis of risk factors and preventive options

Total hip arthroplasty (THA) is one of the most successful elective operations in orthopedic surgery for improving pain and functional disability in patients with end-stage joint disease. However, dislocation continues to be a troublesome complication after THA, as it is a leading cause of revision and is associated with substantial social, health, and economic costs. It is a relatively rare, usually early occurrence that depends on both the patients' characteristics and the surgical aspects. The most recent and important finding is the special attention to be given preoperatively to spinopelvic mobility, which is closely related to the incidence of dislocation. Consequently, clinical and radiographic assessment of the lumbar spine is mandatory to identify an altered pelvic tilt that could suggest a different positioning of the cup. Lumbar spinal fusion is currently considered a risk factor for dislocation and revision regardless of whether it is performed prior to or after THA. Surgical options for its treatment and prevention include the use of prostheses with large diameter of femoral head size, dual mobility constructs, constrained liners, and modular neck stems.

Late fracture of an old-generation modular neck in a titanium alloy femoral stem of a cementless total hip arthroplasty

Neck-stem modularity gained recent popularity in hip arthroplasty for clinical advantages, and few complications have been reported. We describe an unusual two-stage failure of the bimodular neck of a cementless forged titanium alloy stem implanted 12 years before. The retrieved neck was forwarded to the manufacturer for metallurgic evaluation and failure analysis. Lengthening and bending of the superolateral aspect of the neck and double depression of the medial part prove that the prosthetic neck underwent a medial displacement and a varus rotation. The crack initiated from the superolateral corner of the fracture section, and the neck probably underwent two subsequent unstable configurations. The first horizontal part of the fracture occurred in the external surface as a result of physiological load carried on abnormal conditions of frictions. Due to increased oscillations, the end of the fracture section knocked against the inner aspect of the proximal hole of the stem, preventing further valgus displacement of the neck, which was moved forward. Consequently, the neck achieved a second unstable configuration, and the fracture propagated in the weaker direction creating a bent track. Finally, the neck broke unexpectedly as a result of the traumatic event. An incorrect placement into the femoral component during surgery was the initiation of the failure of the bimodular neck. The transitory but repeated interface motion between the neck and the stem induced a local surface irregularity acting as a starting point for crack propagation of fatigue fracture. Final failure followed a direct trauma.