COVID-19 vaccine effectiveness against severe COVID-19 requiring oxygen therapy, invasive mechanical ventilation, and death in Japan: A multicenter case-control study (MOTIVATE study)

INTRODUCTION

Since the SARS-CoV-2 Omicron variant became dominant, assessing COVID-19 vaccine effectiveness (VE) against severe disease using hospitalization as an outcome became more challenging due to incidental infections via admission screening and variable admission criteria, resulting in a wide range of estimates. To address this, the World Health Organization (WHO) guidance recommends the use of outcomes that are more specific to severe pneumonia such as oxygen use and mechanical ventilation.

METHODS

A case-control study was conducted in 24 hospitals in Japan for the Delta-dominant period (August-November 2021; "Delta") and early Omicron (BA.1/BA.2)-dominant period (January-June 2022; "Omicron"). Detailed chart review/interviews were conducted in January-May 2023. VE was measured using various outcomes including disease requiring oxygen therapy, disease requiring invasive mechanical ventilation (IMV), death, outcome restricting to "true" severe COVID-19 (where oxygen requirement is due to COVID-19 rather than another condition(s)), and progression from oxygen use to IMV or death among COVID-19 patients.

RESULTS

The analysis included 2125 individuals with respiratory failure (1608 cases [75.7%]; 99.2% of vaccinees received mRNA vaccines). During Delta, 2 doses provided high protection for up to 6 months (oxygen requirement: 95.2% [95% CI:88.7-98.0%] [restricted to "true" severe COVID-19: 95.5% {89.3-98.1%}]; IMV: 99.6% [97.3-99.9%]; fatal: 98.6% [92.3-99.7%]). During Omicron, 3 doses provided high protection for up to 6 months (oxygen requirement: 85.5% [68.8-93.3%] ["true" severe COVID-19: 88.1% {73.6-94.7%}]; IMV: 97.9% [85.9-99.7%]; fatal: 99.6% [95.2-99.97]). There was a trend towards higher VE for more severe and specific outcomes.

CONCLUSION

Multiple outcomes pointed towards high protection of 2 doses during Delta and 3 doses during Omicron. These results demonstrate the importance of using severe and specific outcomes to accurately measure VE against severe COVID-19, as recommended in WHO guidance in settings of intense transmission as seen during Omicron.

Fabrication of Hydrogen Boride Thin Film by Ion Exchange in MgB2

In this study, hydrogen boride films are fabricated by ion-exchange treatment on magnesium diboride (MgB₂) films under ambient temperature and pressure. We prepared oriented MgB₂ films on strontium titanate (SrTiO₃) substrates using pulsed laser deposition (PLD). Subsequently, these films were treated with ion exchangers in acetonitrile solution. TOF-SIMS analysis evidenced that hydrogen species were introduced into the MgB₂ films by using two types of ion exchangers: proton exchange resin and formic acid. According to the HAXPES analysis, negatively charged boron species were preserved in the films after the ion-exchange treatment. In addition, the FT-IR analysis suggested that B-H bonds were formed in the MgB₂ films following the ion-exchange treatment. The ion-exchange treatment using formic acid was more efficient compared to the resin treatment; with respect to the amount of hydrogen species introduced into the MgB₂ films. These ion-exchanged films exhibited photoinduced hydrogen release as observed in a powder sample. Based on the present study, we expect to be able to control the morphology and hydrogen content of hydrogen boride thin films by optimising the ion-exchange treatment process, which will be useful for further studies and device applications.

FRI0102 SERUM TNFΑ LEVELS AT 24 HOURS AFTER FIRST ADMINISTRATION OF CERTOLIZUMAB PEGOL PREDICT EFFECTIVENESS AT WEEK 12 IN PATIENTS WITH RHEUMATOID ARTHRITIS FROM TSUBAME STUDY (UMIN ID:0002381)

Background:

To increase the remission rate of rheumatoid arthritis (RA), it is necessary to determine the efficacy of the tumor necrosis factor (TNF) inhibitor as early as possible. Moreover, the response to certolizumab pegol (CZP) at 12 weeks has been reported to predict its long-term efficacy.

Objectives:

As part of a prospective single-center observational study (TSUBAME study), we prospectively enrolled patients to be treated with CZP in our institution to evaluate its effectiveness and safety starting at 24 hours after the first dose in clinical settings, while recording blood CZP concentrations and biomarkers over time to examine their correlation with clinical effects.

Methods:

One hundred patients with RA and inadequate response to MTX who received CZP were enrolled in the TSUBAME study. The changes in serum TNFα, IL-6, and CZP levels at 24 hours after first administration of CZP were measured, and the correlation between serum biomarkers and clinical response was determined.

Results:

At 24 hours after CZP initiation, significant improvement was observed in the disease activity (baseline and 24 h: 5.4 ± 1.3, 5.0 ± 1.3, respectively, p < 0.01), which was maintained until week 12. (baseline and 12 w: 5.4 ± 1.3, 3.3 ± 1.4, respectively, p < 0.01). Serum TNFα and IL-6 levels significantly decreased at 24 hours after first administration of CZP compared to baseline. No correlation was found between TNFα and IL-6 levels at baseline and the clinical response. According to univariate analysis, low serum TNFα and IL-6 levels and high CZP levels at 24 hours were associated with DAS28 (ESR) remission at 12 weeks. According to multivariate analysis, low serum TNFα levels at 24 hours were significantly associated with DAS28 (ESR) remission at 12 weeks (OR 0.05, 95%CI 0.01, 0.75, p = 0.03). Based on these findings, an ROC curve was created using remission according to the DAS28 (ESR) at week 12 as a dependent variable and TNFα concentration at 24 hours as an independent variable, resulting in a cut-off value of 0.76 pg/ml. From this result, the TNFα concentration at 24 hours was divided into 2 groups according to this cut-off, and the rates of remission according to the DAS28 (ESR) at week 12 were compared. In the group with TNFα concentration at 24 hours below the cut-off value, the rate of remission according to the DAS28 (ESR) at week 12 was significantly higher than in the group with TNFα concentration at 24 hours above the cut-off value (below the cut-off: above the cut-off = 56.3%: 21.6%, p < 0.001). Between the group that achieved remission according to the DAS28(ESR) and the group that did not achieve remission at week 12, there was almost no difference in the distribution of TNFα concentrations at baseline; however, the distribution of TNFα concentrations at 24 hours was lower in the group that achieved remission.

Conclusion:

CZP was effective where serum TNFα was strongly neutralized within 24 hours. These results suggest that low serum TNFα levels at 24 hours after first administration of CZP may predict the effectiveness of CZP. To increase the remission rate in RA, it is necessary to determine the effectiveness of the molecular targeted drugs used at an early point, in addition to how rapid the onset of action is. CZP is extremely fast-acting, and its effectiveness can be predicted as early as 24 hours after the first dose, suggesting that it may be possible to determine the effectiveness early.

Acknowledgments:

The authors thank Ms. M. Hirahara for providing excellent technical assistance.

Disclosure of Interests:

Yusuke Miyazaki Grant/research support from: Astellas Pharma Inc and UCB S.A., Kazuhisa Nakano: None declared, Shingo Nakayamada Grant/research support from: Mitsubishi-Tanabe, Takeda, Novartis and MSD, Speakers bureau: Bristol-Myers, Sanofi, Abbvie, Eisai, Eli Lilly, Chugai, Asahi-kasei and Pfizer, Satoshi Kubo: None declared, Shigeru Iwata: None declared, Kentaro Hanami: None declared, Shunsuke Fukuyo: None declared, Ippei Miyagawa: None declared, Ayako Yamaguchi: None declared, Akio Kawabe: None declared, SAITO KAZUYOSHI: None declared, Yoshiya Tanaka Grant/research support from: Asahi-kasei, Astellas, Mitsubishi-Tanabe, Chugai, Takeda, Sanofi, Bristol-Myers, UCB, Daiichi-Sankyo, Eisai, Pfizer, and Ono, Consultant of: Abbvie, Astellas, Bristol-Myers Squibb, Eli Lilly, Pfizer, Speakers bureau: Daiichi-Sankyo, Astellas, Chugai, Eli Lilly, Pfizer, AbbVie, YL Biologics, Bristol-Myers, Takeda, Mitsubishi-Tanabe, Novartis, Eisai, Janssen, Sanofi, UCB, and Teijin

Energy of the ^{229}Th Nuclear Clock Isomer Determined by Absolute γ-ray Energy Difference

The low-lying isomeric state of ^{229}Th provides unique opportunities for high-resolution laser spectroscopy of the atomic nucleus. We determine the energy of this isomeric state by taking the absolute energy difference between the excitation energy required to populate the 29.2-keV state from the ground state and the energy emitted in its decay to the isomeric excited state. A transition-edge sensor microcalorimeter was used to measure the absolute energy of the 29.2-keV γ ray. Together with the cross-band transition energy (29.2  keV→ground) and the branching ratio of the 29.2-keV state measured in a recent study, the isomer energy was determined to be 8.30±0.92  eV. Our result is in agreement with the latest measurements based on different experimental techniques, which further confirms that the isomeric state of ^{229}Th is in the laser-accessible vacuum ultraviolet range.

Interlaboratory Evaluation of Two Enzyme-Linked Immunosorbent Assay Kits for the Determination of Crustacean Protein in Processed Foods

The labeling of foods containing material derived from crustaceans such as shrimp and crab is to become mandatory in Japan because of increases in the number of allergy patients. To ensure proper labeling, 2 novel sandwich enzyme-linked immunosorbent assay (ELISA) kits for the determination of crustacean protein in processed foods, the N kit (Nissui Pharmaceutical Co., Ltd, Ibaraki, Japan) and the M kit (Maruha Nichiro Holdings, Inc., Ibaraki, Japan), have been developed. Five types of model processed foods containing 10 and/or 11.9 g/g crustacean soluble protein were prepared for interlaboratory evaluation of the performance of these kits. The N kit displayed a relatively high level of reproducibility relative standard deviation (interlaboratory precision; 4.08.4 RSDR) and sufficient recovery (6586) for all the model processed foods. The M kit displayed sufficient reproducibility (17.620.5 RSDR) and a reasonably high level of recovery (82103). The repeatability relative standard deviation (RSDr) values regarding the detection of crustacean proteins in the 5 model foods were mostly &lt;5.1 RSDr for the N kit and 9.9 RSDr for the M kit. In conclusion, the results of this interlaboratory evaluation suggest that both these ELISA kits would be very useful for detecting crustacean protein in processed foods.

Narrow-line Cooling and Determination of the Magic Wavelength of Cd

We experimentally and theoretically determine the magic wavelength of the (5s^{2})^{1}S_{0}-(5s5p)^{3}P_{0} clock transition of ^{111}Cd to be 419.88(14) and 420.1(7) nm. To perform Lamb-Dicke spectroscopy of the clock transition, we use narrow-line laser cooling on the ^{1}S_{0}-^{3}P_{1} transition to cool the atoms to 6  μK and load them into an optical lattice. Cadmium is an attractive candidate for optical lattice clocks because it has a small sensitivity to blackbody radiation and its efficient narrow-line cooling mitigates higher order light shifts. We calculate the blackbody shift, including the dynamic correction, to be fractionally 2.83(8)×10^{-16} at 300 K, an order of magnitude smaller than that of Sr and Yb. We also report calculations of the Cd ^{1}P_{1} lifetime and the ground state C_{6} coefficient.

The surface composition of asteroid 162173 Ryugu from Hayabusa2 near-infrared spectroscopy

The near-Earth asteroid 162173 Ryugu, the target of the Hayabusa2 sample-return mission, is thought to be a primitive carbonaceous object. We report reflectance spectra of Ryugu's surface acquired with the Near-Infrared Spectrometer (NIRS3) on Hayabusa2, to provide direct measurements of the surface composition and geological context for the returned samples. A weak, narrow absorption feature centered at 2.72 micrometers was detected across the entire observed surface, indicating that hydroxyl (OH)-bearing minerals are ubiquitous there. The intensity of the OH feature and low albedo are similar to thermally and/or shock-metamorphosed carbonaceous chondrite meteorites. There are few variations in the OH-band position, which is consistent with Ryugu being a compositionally homogeneous rubble-pile object generated from impact fragments of an undifferentiated aqueously altered parent body.

Fast x-ray detector system with simultaneous measurement of timing and energy for a single photon

We developed a fast X-ray detector system for nuclear resonant scattering (NRS) experiments. Our system employs silicon avalanche photo-diode (Si-APD) as a fast X-ray sensor. The system is able to acquire both timing and energy of a single X-ray photon simultaneously in a high rate condition, 10⁶ counts per second for one Si-APD. The performance of the system was investigated in SPring-8, a synchrotron radiation facility in Japan. Good time resolution of 120 ps (FWHM) was achieved with a slight tail distribution in the time spectrum by a level of 10^-9 at 1 ns apart from the peak. Using this system, we successfully observed the NRS from the 26.27-keV level of mercury-201, which has a half-life of 630(50) ps. We also demonstrated the reduction of background events caused by radioactive decays in a radioactive sample by discriminating photon energy.

Abstract PD4-08: Efficacy of compression therapy using surgical gloves for nanoparticle albumin-bound-paclitaxel-induced peripheral neuropathy: A phase II multicenter study by the Kamigata breast cancer study group

PURPOSE: Chemotherapy-induced peripheral neuropathy (CIPN) is an adverse effect of many commonly used chemotherapeutic agents, including taxanes. However, there is currently no established effective prophylactic management for CIPN. Thus, we investigated the efficacy of using surgical glove (SG) compression therapy to prevent nanoparticle albumin-bound-paclitaxel (nab-PTX)-induced peripheral neuropathy.

PATIENTS AND METHODS: Patients with primary and recurrent breast cancer who received 260 mg/m2 of nab-PTX were eligible for this case-control study. The patients wore two SGs of the same size, that is, one size smaller than the size that fit, on their dominant hand for 90 minutes. They did not wear SGs on the non-dominant hand, which served as the control hand. Peripheral neuropathy was evaluated at each treatment cycle using Common Terminology Criteria for Adverse Events (CTCAE) version 4.0 and the Patient Neurotoxicity Questionnaire (PNQ). The temperatures of each fingertip of the compression SG-protected and control hands were measured by using thermography.

RESULTS: Between August 2013 and January 2016, 43 patients were enrolled, and 42 were evaluated. As shown in Table 1, the overall occurrence of ≥grade 2 sensory and motor peripheral neuropathy according to the CTCAE was significantly lower in the SG-protected hands than in the control hands (76.1% vs. 21.4% and 57.1% vs. 26.2%, respectively, p &lt; 0.0001). The PNQ results showed that the incidence of ≥grade 4 neuropathy was significantly higher in the control hands than in the SG-protected hands in terms of both sensory and motor neurotoxicity (p &lt; 0.0001, Table 2). As the treatment cycles of nab-PTX increased, the mean CTCAE and PNQ grades of the control hands gradually increased. However, the SG-protected hands maintained significantly lower mean grades than the control hands over time (p &lt; 0.0001).

No patients withdrew from this study because they could not tolerate the compression from the SGs. The mean temperature of each fingertip significantly decreased (1.42–2.60 °C) in the SG-protected hands compared to in the control hands.

CONCLUSIONS: SG compression therapy appears effective for reducing nab-PTX-induced peripheral neuropathy. The nab-PTX exposure to the peripheral nerve may be decreased because the SG decreases microvascular flow to the fingertip.

Table 1: Comparison of the overall occurrences of the different grades of peripheral neuropathy according to CTCAE version 4.0 between the compression surgical glove-protected hands and control handsCTCAE v.4.0SensoryMotorGradeSurgical GloveControlSurgical GloveControl012418712161311292411163080840000

Table 2: Changes in the overall occurrence of the Patient Neurotoxicity Questionnaire (PNQ) grade with surgical glove compression therapyPNQSensoryMotorGradeSurgical gloveControlSurgical gloveControl194209223512113717912431611050000

Citation Format: Tsuyuki S, Senda N, Kanng Y, Yamaguchi A, Yoshibayashi H, Kikawa Y, Katakami N, Kato H, Hashimoto T, Okuno T, Yamauchi A, Inamoto T. Efficacy of compression therapy using surgical gloves for nanoparticle albumin-bound-paclitaxel-induced peripheral neuropathy: A phase II multicenter study by the Kamigata breast cancer study group [abstract]. In: Proceedings of the 2016 San Antonio Breast Cancer Symposium; 2016 Dec 6-10; San Antonio, TX. Philadelphia (PA): AACR; Cancer Res 2017;77(4 Suppl):Abstract nr PD4-08.

Structure and Thermal Behaviour of a Thermotropic Liquid Crystalline Polyimide (PI-LC)

Anomalous solid structures formed by a thermotropic liquid crystalline polyimide (PI-LC) were investigated by thermal analysis, polarized light microscopy and x-ray analysis. It was revealed that PI-LC should undergo a phase transition from the crystalline to the isotropic phase through the smectic or nematic phase in the temperature range 277–300 °C. The PI-LC filament extruded at 280 °C, at which temperature the polymer was in liquid crystalline phase, was formed to have a structure similar to the smectic C phase, while that extruded and melt-drawn at 310 °C, at which temperature the polymer was in the isotropic phase, had a structure similar to the smectic A phase.

Processable Poly(Keto-Imide)s Having Bulky Pendent Ether Groups

1, 3-Bis(3-aminobenzoyl)benzene (BAB), 1, 3-bis(3-amino-4-phenoxybenzoyl)benzene (BAPB) and 1, 3-bis(3-amino-4-biphenoxybenzoyl)benzene (BABB) were synthesized from 1, 3-bis(3-nitro-4-chlorobenzoyl)benzene. By using these three diamines and commercially available tetracarboxylic dianhydrides such as 3, 3′, 4, 4′-benzophenone tetracarboxylic dianhydride (BTDA) and pyromellitic dianhydride (PMDA), several kinds of poly(keto-imide)s were synthesized. Thermal properties and processability such as melt-flowability and solubility in organic solvents of the obtained poly(keto-imide)s were investigated by focusing on the chemical structures of their repeating structure units. Inherent viscosities of poly(keto-imide)s ranged from 0.54 to 0.75 dl g−1. These poly(keto-imide)s displayed glass transition temperatures ( Tg) between 219 and 256 °C, and only the poly(keto-imide) prepared from BAB and PMDA showed a melting point ( Tm)at 451 °C. Melt-flowabilities of these poly(keto-imide)s except for BAB/PMDA poly(keto-imide) were observed between 285 and 330 °C. The poly(keto-imide)s having bulky pendent ether groups were soluble in chloroform, 1, 1, 2-trichloroethane, N, N-dimethylacetamide and m-cresol at ambient temperature.

Preparation and Properties of Novel Aromatic Polyimides from 5,7-Diamino-1,1,4,6-Tetramethylindan and Aromatic Tetracarboxylic Dianhydrides

Novel aromatic polyimides containing indan structure units were prepared from 5,7-diamino-1,1,4,6-tetramethylindan and various aromatic tetracarboxylic dianhydrides. The glass transition temperatures ( Tg’s) of these polyimides were not observed by differential scanning calorimetry at a temperature lower than 500 °C and the 5% weight loss temperatures ( Td5’s) of them were above 422 and 474 °C in air and nitrogen, respectively. Polyimide prepared from 5,7-diamino-1,1,4,6-tetramethylindan and 2,2-bis(3,4-dicarboxyphenyl)-1,1,1,3,3,3-hexafluoropropane dianhydride was soluble in organic solvents such as tetrahydrofuran, cyclopentanone, chloroform, acetone, ethyl acetate, N-methyl-2-pyrrolidinone and cresol at 20 wt% concentration at ambient temperature. The other resulting polyimides obtained from this diamine possessing an indan structure were also soluble in several organic solvents. These results indicated that polymer properties such as thermal behaviour and solubilities were influenced by the indan structure unit in a repeating structure.

Miscibility, Morphology and Tensile Properties of the Melt Blends of Liquid Crystalline Polyimide (PI-LC) with Two Different Thermoplastic Polyimides: Semicrystalline Polyimide (N-TPI) and Amorphous Poly(Ether-Imide) (PEI)

A liquid crystalline polyimide (poly[1, 3-bis[4-(4-aminophenoxy)-α, α-dimethylbenzyl]benzene pyromellitimide]: PI-LC) was blended with two kinds of thermoplastic polyimide: poly[3, 3′-(4, 4′-dioxybiphenyl)diphenylene pyromellitimide] (N-TPI) which is a semicrystalline polyimide having a melting point of 388 °C and poly[2, 2′-bis(3, 4-dicarboxyphenoxy)phenylpropane-2-phenylene bisimide] (PEI) which is an amorphous poly(etherimide) having a glass transition temperature at 220 °C. The miscibility of N-TPI and PI-LC was evaluated by DSC using enthalpy relaxation, and the phase diagram of their blend was drawn above the melting point of N-TPI. The result indicated that the PI-LC-rich blend was miscible in a wide range of compositions. However, the extruded samples of their blend, which had been prepared under a flow of high shear, showed a phase separation structure. In the other combination of PEI and PI-LC, the blend was immiscible, but at low composition of PI-LC their blend fibre showed higher tensile properties than the original PEI fibre.

Transcatheter Embolization of Testicular Vein for Varicocele Testis

Percutaneous transcatheter embolization of the testicular vein was performed on 28 patients with angiographically proven varicocele testis. In 2 patients bilateral and in 26 only the left vein was embolized using 3-, 5-, or 8-mm stainless steel coils. All patients had clinically palpable varicoceles and male infertility. The grade of varicoceles improved after embolization in 23 of 28 cases (82%). Effective sperm count increased significantly from 34.5 ± 44.6 to 65.1 ± 71.0 following embolization. However, pregnancy was achieved only in one of 28 cases. Technically, the basilic vein approach was felt to be superior to the femoral vein or jugular vein approach for this procedure.

Development of C⁶⁺ laser ion source and RFQ linac for carbon ion radiotherapy

A prototype C(6+) injector using a laser ion source has been developed for a compact synchrotron dedicated to carbon ion radiotherapy. The injector consists of a laser ion source and a 4-vane radio-frequency quadrupole (RFQ) linac. Ion beams are extracted from plasma and directly injected into the RFQ. A solenoid guides the low-energy beams into the RFQ. The RFQ is designed to accelerate high-intensity pulsed beams. A structure of monolithic vanes and cavities is adopted to reduce its power consumption. In beam acceleration tests, a solenoidal magnetic field set between the laser ion source and the RFQ helped increase both the peak currents before and after the RFQ by a factor of 4.