Erratum: Measurement of the 2νββ Decay Half-Life of ^{130}Te with CUORE [Phys. Rev. Lett. 126, 171801 (2021)]

This corrects the article DOI: 10.1103/PhysRevLett.126.171801.

Determining g_{A}/g_{V} with High-Resolution Spectral Measurements Using a LiInSe_{2} Bolometer

Neutrinoless double beta decay (0νββ) processes sample a wide range of intermediate forbidden nuclear transitions, which may be impacted by quenching of the axial vector coupling constant (g_{A}/g_{V}), the uncertainty of which plays a pivotal role in determining the sensitivity reach of 0νββ experiments. In this Letter, we present measurements performed on a high-resolution LiInSe_{2} bolometer in a "source=detector" configuration to measure the spectral shape of the fourfold forbidden β decay of ^{115}In. The value of g_{A}/g_{V} is determined by comparing the spectral shape of theoretical predictions to the experimental β spectrum taking into account various simulated background components as well as a variety of detector effects. We find evidence of quenching of g_{A}/g_{V} at >5σ with a model-dependent quenching factor of 0.655±0.002 as compared to the free-nucleon value for the interacting shell model. We also measured the ^{115}In half-life to be [5.18±0.06(stat)_{-0.015}^{+0.005}(sys)]×10^{14}  yr within the interacting shell model framework. This Letter demonstrates the power of the bolometeric technique to perform precision nuclear physics single-β decay measurements, which along with improved nuclear modeling can help reduce the uncertainties in the calculation of several decay nuclear matrix elements including those used in 0νββ sensitivity calculations.

New Direct Limit on Neutrinoless Double Beta Decay Half-Life of ^{128}Te with CUORE

The Cryogenic Underground Observatory for Rare Events (CUORE) at Laboratori Nazionali del Gran Sasso of INFN in Italy is an experiment searching for neutrinoless double beta (0νββ) decay. Its main goal is to investigate this decay in ^{130}Te, but its ton-scale mass and low background make CUORE sensitive to other rare processes as well. In this Letter, we present our first results on the search for 0νββ decay of ^{128}Te, the Te isotope with the second highest natural isotopic abundance. We find no evidence for this decay, and using a Bayesian analysis we set a lower limit on the ^{128}Te 0νββ decay half-life of T_{1/2}>3.6×10^{24}  yr (90% CI). This represents the most stringent limit on the half-life of this isotope, improving by over a factor of 30 the previous direct search results, and exceeding those from geochemical experiments for the first time.

Measurement of the 2νββ Decay Half-Life of ^{130}Te with CUORE

We measured two-neutrino double beta decay of ^{130}Te using an exposure of 300.7 kg yr accumulated with the CUORE detector. Using a Bayesian analysis to fit simulated spectra to experimental data, it was possible to disentangle all the major background sources and precisely measure the two-neutrino contribution. The half-life is in agreement with past measurements with a strongly reduced uncertainty: T_{1/2}^{2ν}=7.71_{-0.06}^{+0.08}(stat)_{-0.15}^{+0.12}(syst)×10^{20}  yr. This measurement is the most precise determination of the ^{130}Te 2νββ decay half-life to date.

Measuring mineralised tissue formation and resorption in a human 3D osteoblast-osteoclast co-culture model

In vitro tissue engineered bone constructs have been developed, but models which mimic both formation and resorption in parallel are still lacking. To be used as a model for the bone remodeling process, the formation and resorption of mineralised tissue volume over time needs to be visualised, localised and quantified. The goal of this study was to develop a human 3D osteoblast-osteoclast co-culture in which 1) osteoblasts deposit mineralised matrix, 2) monocytes differentiate into resorbing osteoclasts, and 3) the formation and resorption of mineralised matrix could be quantified over time using micro-computed tomography (μCT). Mesenchymal stromal cells were seeded on silk fibroin scaffolds and differentiated towards osteoblasts to create mineralised constructs. Thereafter, monocytes were added and differentiated towards osteoclasts. The presence of osteoblasts and osteoclasts was confirmed using immunohistochemistry. Osteoclastic activity was confirmed by measuring the increased release of osteoclast marker tartrate resistant acid phosphatase (TRAP), suggesting that osteoclasts were actively resorbing mineralised tissue. Resorption pits were visualised using scanning electron microscopy. Mineralised matrix formation and resorption were quantified using μCT and subsequent scans were registered to visualise remodelling. Both formation and resorption occurred in parallel in the co-culture. The resorbed tissue volume exceeded the formed tissue volume after day 12. In conclusion, the current model was able to visualise, localise and quantify mineralised matrix formation and resorption. Such a model could be used to facilitate fundamental research on bone remodeling, facilitate drug testing and may have clinical implications in personalised medicine by allowing the use of patient cells.

Defoliation dynamics, pasture intake and milk production of dairy cows grazing lucerne pastures in a partial mixed-ration system

The effect of lucerne pasture allocation on defoliation dynamics, pasture intake and animal production was investigated in a subtropical partial mixed-ration dairy system. The study took place at the Gatton Research Dairy, south-eastern Queensland, with a 28-day adaptation period followed by an 8-day treatment period during November and December 2016. Twenty-four multiparous Holstein Friesian dairy cows were offered 11 kg of dry matter (DM)/cow.day as partial mixed-ration dairy system, and four levels of daily pasture allocation measured to 5-cm residual pasture height (averaging 30.6, 20.5, 15.1 and 10.9 kg DM/cow.day). Cows with lower allocations were forced to graze further down the vertical plane and pasture intake and milk yield significantly (P < 0.001) declined. Cows grazed the top grazing stratum (TGS) across 80% of the pasture area before re-grazing another area of the paddock, regardless of the allocation level. Pasture intake (kg DM/ha) of the TGS was at least 2.9 times higher than that of the lower strata, regardless of allocation level. Therefore, the decline in pasture intake is explained by the transition from grazing the TGS to grazing lower strata. When the horizontal utilisation of the TGS approached 100%, the proportion of ungrazed, uncontaminated pasture approached 0% of the area, and intake and milk production declined. Grazing management strategies for lucerne should allocate pasture to lactating dairy cows to achieve horizontal utilisations approaching 0% for proportion of ungrazed, uncontaminated pasture to maximise intake and production. Secondary grazing herds or mechanical methods should be used to remove residual pasture to the ideal height for pasture regrowth.

Shell-binary nanoparticle materials with variable electrical and electro-mechanical properties

Nanoparticle (NP) materials with the capability to adjust their electrical and electro-mechanical properties facilitate applications in strain sensing technology. Traditional NP materials based on single component NPs lack a systematic and effective means of tuning their electrical and electro-mechanical properties. Here, we report on a new type of shell-binary NP material fabricated by self-assembly with either homogeneous or heterogeneous arrangements of NPs. Variable electrical and electro-mechanical properties were obtained for both materials. We show that the electrical and electro-mechanical properties of these shell-binary NP materials are highly tunable and strongly affected by the NP species as well as their corresponding volume fraction ratio. The conductivity and the gauge factor of these shell-binary NP materials can be altered by about five and two orders of magnitude, respectively. These shell-binary NP materials with different arrangements of NPs also demonstrate different volume fraction dependent electro-mechanical properties. The shell-binary NP materials with a heterogeneous arrangement of NPs exhibit a peaking of the sensitivity at medium mixing ratios, which arises from the aggregation induced local strain enhancement. Studies on the electron transport regimes and micro-morphologies of these shell-binary NP materials revealed the different mechanisms accounting for the variable electrical and electro-mechanical properties. A model based on effective medium theory is used to describe the electrical and electro-mechanical properties of such shell-binary nanomaterials and shows an excellent match with experiment data. These shell-binary NP materials possess great potential applications in high-performance strain sensing technology due to their variable electrical and electro-mechanical properties.

Facile, non-destructive characterization of 2d photonic crystals using UV-vis-spectroscopy

The quality of particle monolayers and size evolution of their particles during dry etching can be monitored by radiative losses of photonic modes into dielectric substrates.

Observation of chemically protected polydimethylsiloxane: towards crack-free PDMS

The current modification of polydimethylsiloxane (PDMS) substrates via oxygen plasma treatment causes surface cracks. Here, we demonstrate a method to prevent crack formation by chemical treatment. Chemical modification renders the surface hydrophilic for several days and is effective in preserving the elasticity of the PDMS surface at the nanoscale level.

Temperature-Dependent Electron Transport in Single Terphenyldithiol Molecules

Analyzing the electronic properties of individual terphenyldithiol (TPT) molecules in a temperature range of 30-300 K using cryogenic mechanically controllable break junctions, we observe an unexpected change of the transport mechanism with temperature for this linear and symmetric aromatic molecule. Whereas the work function (∼3.8 eV) and molecular energy level (∼0.8 to ∼1 eV depending on the analysis of the data) of TPT are temperature-independent, elastic tunneling dominates charge transport at low temperatures, whereby an inelastic transport (via hopping) sets in at about 100 K. The molecular level of TPT lies around 1 eV and is temperature-independent. This unusual temperature dependence agrees with recent predictions for other short molecules using density-functional-based transport studies as well as experimental observations obtained for similar relatively short rodlike molecules.

Surface coupling strength of gold nanoparticles affects cytotoxicity towards neurons

Weakly bound gold nanoparticles reveal awful toxicity towards neurons.

The AUSTRAL VLBI observing program

The AUSTRAL observing program was started in 2011, performing geodetic and astrometric very long baseline interferometry (VLBI) sessions using the new Australian AuScope VLBI antennas at Hobart, Katherine, and Yarragadee, with contribution from the Warkworth (New Zealand) 12 m and Hartebeesthoek (South Africa) 15 m antennas to make a southern hemisphere array of telescopes with similar design and capability. Designed in the style of the next-generation VLBI system, these small and fast antennas allow for a new way of observing, comprising higher data rates and more observations than the standard observing sessions coordinated by the International VLBI Service for Geodesy and Astrometry (IVS). In this contribution, the continuous development of the AUSTRAL sessions is described, leading to an improvement of the results in terms of baseline length repeatabilities by a factor of two since the start of this program. The focus is on the scheduling strategy and increased number of observations, aspects of automated operation, and data logistics, as well as results of the 151 AUSTRAL sessions performed so far. The high number of the AUSTRAL sessions makes them an important contributor to VLBI end-products, such as the terrestrial and celestial reference frames and Earth orientation parameters. We compare AUSTRAL results with other IVS sessions and discuss their suitability for the determination of baselines, station coordinates, source coordinates, and Earth orientation parameters.

Single Molecule Characterization of UV-Activated Antibodies on Gold by Atomic Force Microscopy

The interaction between proteins and solid surfaces can influence their conformation and therefore also their activity and affinity. These interactions are highly specific for the respective combination of proteins and solids. Consequently, it is desirable to investigate the conformation of proteins on technical surfaces, ideally at single molecule level, and to correlate the results with their activity. This is in particular true for biosensors where the conformation-dependent target affinity of an immobilized receptor determines the sensitivity of the sensor. Here, we investigate for the first time the immobilization and orientation of antibodies (Abs) photoactivated by a photonic immobilization technique (PIT), which has previously demonstrated to enhance binding capabilities of antibody receptors. The photoactivated immunoglobulins are immobilized on ultrasmooth template stripped gold films and investigated by atomic force microscopy (AFM) at the level of individual molecules. The observed protein orientations are compared with results of nonactivated antibodies adsorbed on similar gold films and mica reference samples. We find that the behavior of Abs is similar for mica and gold when the protein are not treated (physisorption), whereas smaller contact area and larger heights are measured when Abs are treated (PIT). This is explained by assuming that the activated antibodies tend to be more upright compared with nonirradiated ones, thereby providing a better exposure of the binding sites. This finding matches the observed enhancement of Abs binding efficiency when PIT is used to functionalize gold surface of QCM-based biosensors.

Endothelin-1 Immunoreactivity and its Association with Intramedullary Hemorrhage and Myelomalacia in Naturally Occurring Disk Extrusion in Dogs

Background

The pathophysiology of ascending/descending myelomalacia (ADMM) after canine intervertebral disk (IVD) extrusion remains poorly understood. Vasoactive molecules might contribute.

Hypothesis/Objectives

To investigate the immunoreactivity of endothelin‐1 (ET‐1) in the uninjured and injured spinal cord of dogs and its potential association with intramedullary hemorrhage and extension of myelomalacia.

Animals

Eleven normal control and 34 dogs with thoracolumbar IVD extrusion.

Methods

Spinal cord tissue of dogs retrospectively selected from our histopathologic database was examined histologically at the level of the extrusion (center) and in segments remote from the center. Endothelin‐1 immunoreactivity was examined immunohistochemically and by in situ hybridization. Associations between the immunoreactivity for ET‐1 and the severity of intramedullary hemorrhage or the extension of myelomalacia were examined.

Results

Endothelin‐1 was expressed by astrocytes, macrophages, and neurons and only rarely by endothelial cells in all dogs. At the center, ET‐1 immunoreactivity was significantly higher in astrocytes (median score 4.02) and lower in neurons (3.21) than in control dogs (3.0 and 4.54) (P < .001; P = .004) irrespective of the grade of hemorrhage or myelomalacia. In both astrocytes and neurons, there was a higher ET‐1 immunoreactivity in spinal cord regions remote from the center (4.58 and 4.15) than in the center itself (P = .013; P = .001). ET‐1 mRNA was present in nearly all neurons with variable intensity, but not in astrocytes.

Conclusion and Clinical Importance

Enhanced ET‐1 immunoreactivity over multiple spinal cord segments after IVD extrusion might play a role in the pathogenesis of ADMM. More effective quantitative techniques are required.

Ultra-thin resin embedding method for scanning electron microscopy of individual cells on high and low aspect ratio 3D nanostructures

The preparation of biological cells for either scanning or transmission electron microscopy requires a complex process of fixation, dehydration and drying. Critical point drying is commonly used for samples investigated with a scanning electron beam, whereas resin-infiltration is typically used for transmission electron microscopy. Critical point drying may cause cracks at the cellular surface and a sponge-like morphology of nondistinguishable intracellular compartments. Resin-infiltrated biological samples result in a solid block of resin, which can be further processed by mechanical sectioning, however that does not allow a top view examination of small cell-cell and cell-surface contacts. Here, we propose a method for removing resin excess on biological samples before effective polymerization. In this way the cells result to be embedded in an ultra-thin layer of epoxy resin. This novel method highlights in contrast to standard methods the imaging of individual cells not only on nanostructured planar surfaces but also on topologically challenging substrates with high aspect ratio three-dimensional features by scanning electron microscopy.

Diagnostic performance of 18F-FDG-PET/CT in vascular graft infections

OBJECTIVE

The aim of this study was to evaluate the diagnostic accuracy of positron emission tomography/computed tomography with (18)F-fludeoxyglucose (FDG-PET/CT) in a population with suspected graft infection and to validate a new diagnostic imaging score for FDG-PET/CT.

METHODS

This was a prospective cohort study. FDG-PET/CT was performed prospectively in 34 patients with suspected graft infection, in 12 of them before the start of antimicrobial treatment. Diagnostic accuracy was assessed using a new five point visual grading score and by using a binary score. Maximum standardized uptake values (SUVmax) were calculated for quantitative measurements of metabolic activity, and cut off points were calculated using the receiver operator curve (ROC). The standard of reference was a microbiological culture, obtained after open biopsy or graft explantation.

RESULTS

Using the new scale, FDG-PET/CT correctly recognized 27 patients with graft infection, one patient was diagnosed as false positive, six patients were correctly classified as true negative, and no patients were rated false negative. Hence, sensitivity, specificity, positive predictive value (PPV), negative predictive value (NPV), and accuracy of FDG-PET/CT for the diagnosis of graft infections were 100%, 86%, 96%, 100%, and 97%, respectively. Using a previously established binary score, sensitivity, specificity, PPV, NPV, and accuracy were 96%, 86%, 96%, 86%, and 94% respectively. ROC analysis suggested an SUVmax cut off value of ≥3.8 to differentiate between infected and non-infected grafts (p < .001). Additionally, FDG-PET/CT provided a conclusive clinical diagnosis in six of seven patients without graft infection (i.e., other sites of infections).

CONCLUSIONS

The diagnostic accuracy of FDG-PET/CT in the detection of aortic graft infection is high. A newly introduced five point visual grading score and early imaging prior to antimicrobial treatment may further improve the diagnostic accuracy.

Advanced fabrication of Si nanowire FET structures by means of a parallel approach

In this paper we present fabricated Si nanowires (NWs) of different dimensions with enhanced electrical characteristics. The parallel fabrication process is based on nanoimprint lithography using high-quality molds, which facilitates the realization of 50 nm-wide NW field-effect transistors (FETs). The imprint molds were fabricated by using a wet chemical anisotropic etching process. The wet chemical etch results in well-defined vertical sidewalls with edge roughness (3σ) as small as 2 nm, which is about four times better compared with the roughness usually obtained for reactive-ion etching molds. The quality of the mold was studied using atomic force microscopy and scanning electron microscopy image data. The use of the high-quality mold leads to almost 100% yield during fabrication of Si NW FETs as well as to an exceptional quality of the surfaces of the devices produced. To characterize the Si NW FETs, we used noise spectroscopy as a powerful method for evaluating device performance and the reliability of structures with nanoscale dimensions. The Hooge parameter of fabricated FET structures exhibits an average value of 1.6 × 10(-3). This value reflects the high quality of Si NW FETs fabricated by means of a parallel approach that uses a nanoimprint mold and cost-efficient technology.

How to diagnose and treat abdominal compartment syndrome after endovascular and open repair of ruptured abdominal aortic aneurysms

Intra-abdominal hypertension (IAH) and abdominal compartment syndrome (ACS) are frequently encountered in patients treated for ruptured abdominal aortic aneurysms (rAAA) and carry a high morbidity and mortality risk. Despite these facts, IAH/ACS are still overlooked by many physicians, timely diagnosis is missed and treatment often inadequate. All staff involved in the treatment of rAAA should be aware of the risk factors predicting IAH/ACS, the profound implications and derangements on all organ systems, the clinical presentation, the appropriate measurement of intra-abdominal pressure to detect IAH/ACS and the current treatment options for these detrimental syndromes. This comprehensive review provides contemporary knowledge that should help to improve patient survival and long-term outcome.