Photocatalytic Semi-Hydrogenation of Acetylene to Polymer-Grade Ethylene with Molecular and Metal-Organic Framework Cobaloximes

The semi-hydrogenation of acetylene in ethylene-rich gas streams is a high-priority industrial chemical reaction for producing polymer-grade ethylene. Traditional thermocatalytic routes for acetylene reduction to ethylene, despite progress, still require high temperatures and high H2 consumption, possess relatively low selectivity, and use a noble metal catalyst. Light-powered strategies are starting to emerge, given that they have the potential to use directly the abundant and sustainable solar irradiation, but are ineffective. Here an efficient, >99.9% selective, visible-light powered, catalytic conversion of acetylene to ethylene is reported. The catalyst is a homogeneous molecular cobaloxime that operates in tandem with a photosensitizer at room temperature and bypasses the use of non-environmentally friendly and flammable H2 gas feed. The reaction proceeds through a cobalt-hydride intermediate with ≈100% conversion of acetylene under competitive (ethylene co-feed) conditions after only 50 min, and with no evolution of H2 or over-hydrogenation to ethane. The cobaloxime is further incorporated as a linker in a metal-organic framework; the result is a heterogeneous catalyst for the conversion of acetylene under competitive (ethylene co-feed) conditions that can be recycled up to six times and remains catalytically active for 48 h, before significant loss of performance is observed.

Nitrogen-enriched flexible metal-organic framework for CO2 adsorption

A novel MOF named [Zn2(L)(DMF)] was synthesized using solvothermal methods from the reaction of the new linker (4,4',4''-(4,4',4''-(benzene-1,3,5-triyltris(methylene))tris(3,5-dimethyl-1H-pyrazole-4,1-diyl))tribenzoic acid) and Zn(NO3)2·6H2O. This new MOF was characterized by means of different techniques: powder X-ray diffraction, N2 adsorption and desorption isotherms, thermogravimetric analysis, and scanning electron microscopy. Furthermore, suitable crystals were obtained, which allowed us to perform the X-Ray structure determination of this MOF. The capability of these new MOF to adsorb CO2 at different temperatures was measured and its isosteric enthalpy of adsorption was calculated. The novel MOF shows an uncommon node composed of a Zn3(-COO)6(DMF)2, and the asymmetric unit contains one crystallographically independent linker, one DMF molecule, and two Zn atoms. The [Zn2(L)(DMF)] MOF is a microporous material with high crystallinity and stability up to 250 °C. The multiple nitrogenated pyrazole linkers in its framework enhance its CO2 adsorption capabilities. This material exhibits a low CO2 isosteric enthalpy of adsorption (Hads), comparable to previously reported values for similar nitrogenated materials. All the observed CO2 adsorption capacities were further supported by DFT calculations.

Correction: Defect-enabling zirconium-based metal-organic frameworks for energy and environmental remediation applications

Correction for 'Defect-enabling zirconium-based metal-organic frameworks for energy and environmental remediation applications' by Saba Daliran et al., Chem. Soc. Rev., 2024, https://doi.org/10.1039/d3cs01057k.

Defect-enabling zirconium-based metal-organic frameworks for energy and environmental remediation applications

This comprehensive review explores the diverse applications of defective zirconium-based metal-organic frameworks (Zr-MOFs) in energy and environmental remediation. Zr-MOFs have gained significant attention due to their unique properties, and deliberate introduction of defects further enhances their functionality. The review encompasses several areas where defective Zr-MOFs exhibit promise, including environmental remediation, detoxification of chemical warfare agents, photocatalytic energy conversions, and electrochemical applications. Defects play a pivotal role by creating open sites within the framework, facilitating effective adsorption and remediation of pollutants. They also contribute to the catalytic activity of Zr-MOFs, enabling efficient energy conversion processes such as hydrogen production and CO2 reduction. The review underscores the importance of defect manipulation, including control over their distribution and type, to optimize the performance of Zr-MOFs. Through tailored defect engineering and precise selection of functional groups, researchers can enhance the selectivity and efficiency of Zr-MOFs for specific applications. Additionally, pore size manipulation influences the adsorption capacity and transport properties of Zr-MOFs, further expanding their potential in environmental remediation and energy conversion. Defective Zr-MOFs exhibit remarkable stability and synthetic versatility, making them suitable for diverse environmental conditions and allowing for the introduction of missing linkers, cluster defects, or post-synthetic modifications to precisely tailor their properties. Overall, this review highlights the promising prospects of defective Zr-MOFs in addressing energy and environmental challenges, positioning them as versatile tools for sustainable solutions and paving the way for advancements in various sectors toward a cleaner and more sustainable future.

Chemically Reversible CO2 Uptake by Dendrimer-Impregnated Metal-Organic Frameworks

Industrialization over the past two centuries has resulted in a continuous rise in global CO2 emissions. These emissions are changing ecosystems and livelihoods. Therefore, methods are needed to capture these emissions from point sources and possibly from our atmosphere. Though the amount of CO2 is rising, it is challenging to capture directly from air because its concentration in air is extremely low, 0.04%. In this study, amines installed inside metal-organic frameworks (MOFs) are investigated for the adsorption of CO2, including at low concentrations. The amines used are polyamidoamine dendrimers that contain many primary amines. Chemically reversible adsorption of CO2 via carbamate formation was observed, as was enhanced uptake of carbon dioxide, likely via dendrimer-amide-based physisorption. Limiting factors in this initial study are comparatively low dendrimer loadings and slow kinetics for carbon dioxide uptake and release, even at 80 °C.

Atomically Precise Single-Site Catalysts via Exsolution in a Polyoxometalate-Metal-Organic-Framework Architecture

Single-site catalysts (SSCs) achieve a high catalytic performance through atomically dispersed active sites. A challenge facing the development of SSCs is aggregation of active catalytic species. Reducing the loading of these sites to very low levels is a common strategy to mitigate aggregation and sintering; however, this limits the tools that can be used to characterize the SSCs. Here we report a sintering-resistant SSC with high loading that is achieved by incorporating Anderson-Evans polyoxometalate clusters (POMs, MMo6O24, M = Rh/Pt) within NU-1000, a Zr-based metal-organic framework (MOF). The dual confinement provided by isolating the active site within the POM, then isolating the POMs within the MOF, facilitates the formation of isolated noble metal sites with low coordination numbers via exsolution from the POM during activation. The high loading (up to 3.2 wt %) that can be achieved without sintering allowed the local structure transformation in the POM cluster and the surrounding MOF to be evaluated using in situ X-ray scattering with pair distribution function (PDF) analysis. Notably, the Rh/Pt···Mo distance in the active catalyst is shorter than the M···M bond lengths in the respective bulk metals. Models of the active cluster structure were identified based on the PDF data with complementary computation and X-ray absorption spectroscopy analysis.

Ligand Desorption and Fragmentation in Oleate-Capped CdSe Nanocrystals under High-Intensity Photoexcitation

Semiconductor nanocrystals (NCs) offer prospective use as active optical elements in photovoltaics, light-emitting diodes, lasers, and photocatalysts due to their tunable optical absorption and emission properties, high stability, and scalable solution processing, as well as compatibility with additive manufacturing routes. Over the course of experiments, during device fabrication, or while in use commercially, these materials are often subjected to intense or prolonged electronic excitation and high carrier densities. The influence of such conditions on ligand integrity and binding remains underexplored. Here, we expose CdSe NCs to laser excitation and monitor changes in oleate that is covalently attached to the NC surface using nuclear magnetic resonance as a function of time and laser intensity. Higher photon doses cause increased rates of ligand loss from the particles, with upward of 50% total ligand desorption measured for the longest, most intense excitation. Surprisingly, for a range of excitation intensities, fragmentation of the oleate is detected and occurs concomitantly with formation of aldehydes, terminal alkenes, H2, and water. After illumination, NC size, shape, and bandgap remain constant although low-energy absorption features (Urbach tails) develop in some samples, indicating formation of substantial trap states. The observed reaction chemistry, which here occurs with low photon to chemical conversion efficiency, suggests that ligand reactivity may require examination for improved NC dispersion stability but can also be manipulated to yield desired photocatalytically accessed chemical species.

A Nanocavitation Approach to Understanding Water Capture, Water Release, and Framework Physical Stability in Hierarchically Porous MOFs

Chemically stable metal-organic frameworks (MOFs) featuring interconnected hierarchical pores have proven to be promising for a remarkable variety of applications. Nevertheless, the framework's susceptibility to capillary-force-induced pore collapse, especially during water evacuation, has often limited practical applications. Methodologies capable of predicting the relative magnitudes of these forces as functions of the pore size, chemical composition of the pore walls, and fluid loading would be valuable for resolution of the pore collapse problem. Here, we report that a molecular simulation approach centered on evacuation-induced nanocavitation within fluids occupying MOF pores can yield the desired physical-force information. The computations can spatially pinpoint evacuation elements responsible for collapse and the chemical basis for mitigation of the collapse of modified pores. Experimental isotherms and difference-electron density measurements of the MOF NU-1000 and four chemical variants validate the computational approach and corroborate predictions regarding relative stability, anomalous sequence of pore-filling, and chemical basis for mitigation of destructive forces.

Geometry and Chemistry: Influence of Pore Functionalization on Molecular Transport and Diffusion in Solvent-Filled Zirconium Metal-Organic Frameworks

Postsynthetic modification (PSM) of metal-organic frameworks (MOFs) enables incorporation of diverse functionalities in pores for chemical separations, drug delivery, and heterogeneous catalysis. However, the effect of PSM on molecular transport, which is essential for most applications of MOFs, has been rarely studied. In this paper, we used perfluoroalkane-functionalized Zr-MOF NU-1008 as a platform to systematically interrogate transport processes and mechanisms in solvated pores. We anchored perfluoroalkanes onto NU-1008 nodes by solvent-assisted ligand incorporation (SALI-n, with n = 3, 5, 7, and 9 denoting the number of fluorinated carbons). Transport of a luminescent molecule, BODIPY, through individual crystallites of four versions of methanol-filled SALI-n was monitored by confocal fluorescence microscopy as a function of time and location. In comparison with the parent NU-1008, the diffusivity of the probe molecules within SALI-n declined by 2- to 7-fold depending on chain length and loading, presumably due to the reduction in pore diameter or adsorptive interactions with perfluoroalkyl chains. Atomistic simulations were performed to uncover the microscopic behavior of the BODIPY diffusion in SALI-n. The perfluoroalkyl chains are observed to stay close to the pore walls, instead of extending toward the pore center. BODIPY molecules, which preferably interact with linkers, were pushed to the interior of the channels as the chain length increased, resulting in solvated diffusion and minor differences in the short-time mobility of BODIPY in SALI-n. This suggested that the observed decline of transport diffusivity in SALI-n mainly stemmed from the reduction in the pore size when these flexible chains are present. We anticipate that this proof of concept will assist in understanding how pore functionalization can physically and chemically affect mass transport in MOFs and will be useful in further guiding the design of PSM to realize the optimal performance of MOFs for various applications.

Bioinspired Cu(II) Defect Sites in ZIF-8 for Selective Methane Oxidation

Activating the C-H bonds of alkanes without further oxidation to more thermodynamically stable products, CO and CO2, is a long-sought goal of catalytic chemistry. Inspired by the monocopper active site of methane monooxygenase, we synthesized a Cu-doped ZIF-8 metal-organic framework with 25% Cu and 75% Zn in the nodes and activated it by heating to 200 °C and dosing in a stepwise fashion with O2, methane, and steam. We found that it does oxidize methane to methanol and formaldehyde. The catalysis persists through at least five cycles, and beyond the third cycle, the selectivity improves to the extent that no CO2 can be detected. Experimental characterization and analysis were carried out by PXRD, DRUV-vis, SEM, and XAS (XANES and EXAFS). The reaction is postulated to proceed at open-coordination copper sites generated by defects, and the mechanism of methanol production was explicated by density functional calculations with the revMO6-L exchange-correlation functional. The calculations reveal a catalytic cycle of oxygen-activated CuI involving the conversion of two molecules of CH4 to two molecules of CH3OH by a sequence of hydrogen atom transfer reactions and rebound steps. For most steps in the cycle, the reaction is more favored by singlet species than by triplets.

Water-Accelerated Transport: Vapor-Phase Nerve Agent Simulant Delivery within a Catalytic Zirconium Metal-Organic Framework as a Function of Relative Humidity

Zirconium-based metal-organic frameworks (MOFs) are candidate materials for effective nerve agent detoxification due to their thermo- and water stability as well as high density of catalytic Zr sites. However, as high-porosity materials, most of the active sites of Zr-MOFs can only be accessed by diffusion into the crystal interior. Therefore, the transport of nerve agents in nanopores is an important factor in the catalytic performance of Zr-MOFs. Here, we investigated the transport process and mechanism of a vapor-phase nerve agent simulant, dimethyl methyl phosphonate (DMMP), through a representative Zr-MOF, NU-1008, under practical conditions of varying humidity. Confocal Raman microscopy was used to monitor the transport of DMMP vapor through individual NU-1008 crystallites, where the relative humidity (RH) of the environment was tuned to understand the impact of water. Counterintuitively, water in the MOF channels, instead of blocking DMMP transport, assists DMMP diffusion; indeed, the transport diffusivity (D_t) of DMMP in NU-1008 is one order of magnitude higher at 70% than 0% RH. To understand the mechanism, magic angle spinning NMR and molecular dynamics simulations were performed and suggested that high water content in the channels prevents DMMP from hydrogen-bonding with the nodes, allowing for faster diffusion of DMMP in the channels. The simulated self-diffusivity (D_s) of DMMP is observed to be concentration-dependent. At low loading of DMMP, D_s is higher at 70% RH than 0% RH, while at high loadings the trend reverses due to the DMMP aggregation in water and the reduction of free volume in channels.

Photoreactive Carbon Dioxide Capture by a Zirconium-Nanographene Metal-Organic Framework

The mechanism of photochemical CO₂ reduction to formate by PCN-136, a Zr-based metal-organic framework (MOF) that incorporates light-harvesting nanographene ligands, has been investigated using steady-state and time-resolved spectroscopy and density functional theory (DFT) calculations. The catalysis was found to proceed via a "photoreactive capture" mechanism, where Zr-based nodes serve to capture CO₂ in the form of Zr-bicarbonates, while the nanographene ligands have a dual role of absorbing light and storing one-electron equivalents for catalysis. We also find that the process occurs via a "two-for-one" route, where a single photon initiates a cascade of electron/hydrogen atom transfers from the sacrificial donor to the CO₂-bound MOF. The mechanistic findings obtained here illustrate several advantages of MOF-based architectures in molecular photocatalyst engineering and provide insights on ways to achieve high formate selectivity.

Post-Synthetic Cyano-ferrate(II) Functionalization of a Metal-Organic Framework, NU-1000

Starting with ferrocyanide ions in acidic aqueous solution, cyano-ferrate(II) species are post-synthetically grafted to the nodes of a mesoporous zirconium-based MOF, NU-1000. As indicated by single-crystal X-ray crystallography, grafting occurs by substitution of cyanide ligands by node-based hydroxo and oxo ligands rather than by substitution of node aqua ligands by cyanide ligands as bridges between Fe(II) and Zr(IV). The installed moieties yield a broad absorption band that is tentatively ascribed to iron-to-zirconium charge transfer. Consistent with Fe(III/II) redox activity, a modest fraction of the installed iron complexes are directly electrochemically addressable.

Synthetic Access to a Framework-Stabilized and Fully Sulfided Analogue of an Anderson Polyoxometalate that is Catalytically Competent for Reduction Reactions

Polyoxometalates (POMs) featuring 7, 12, 18, or more redox-accessible transition metal ions are ubiquitous as selective catalysts, especially for oxidation reactions. The corresponding synthetic and catalytic chemistry of stable, discrete, capping-ligand-free polythiometalates (PTMs), which could be especially attractive for reduction reactions, is much less well developed. Among the challenges are the propensity of PTMs to agglomerate and the tendency for agglomeration to block reactant access of catalyst active sites. Nevertheless, the pervasive presence of transition metal sulfur clusters metalloenzymes or cofactors that catalyze reduction reactions and the justifiable proliferation of studies of two-dimensional (2D) metal-chalcogenides as reduction catalysts point to the promise of well-defined and controllable PTMs as reduction catalysts. Here, we report the fabrication of agglomeration-immune, reactant-accessible, capping-ligand-free Co^IIMo₆^IVS₂₄^n- clusters as periodic arrays in a water-stable, hierarchically porous Zr-metal-organic framework (MOF; NU1K) by first installing a disk-like Anderson polyoxometalate, Co^IIIMo₆^VIO₂₄^m-, in size-matched micropores where the siting is established via difference electron density (DED) X-ray diffraction (XRD) experiments. Flowing H₂S, while heating, reduces molybdenum(VI) ions to Mo(IV) and quantitatively replaces oxygen anions with sulfur anions (S^2-, HS^-, S₂^2-). DED maps show that MOF-templated POM-to-PTM conversion leaves clusters individually isolated in open-channel-connected micropores. The structure of the immobilized cluster as determined, in part, by X-ray photoelectron spectroscopy (XPS), X-ray absorption fine structure (XAFS) analysis, and pair distribution function (PDF) analysis of total X-ray scattering agrees well with the theoretically simulated structure. PTM@MOF displays both electrocatalytic and photocatalytic competency for hydrogen evolution. Nevertheless, the initially installed PTM appears to be a precatalyst, gaining competency only after the loss of ∼3 to 6 sulfurs and exposure to hydride-forming metal ions.

Isomer of NU-1000 with a Blocking c-pore Exhibits High Water-Vapor Uptake Capacity and Greatly Enhanced Cycle Stability

Chemically and hydrolytically stable metal-organic frameworks (MOFs) have shown great potential for many water-adsorption-related applications. However, MOFs with large pores that show high water-uptake capacity and high hydrolytic and mechanical cycle stability are rare. Through a deliberate adjustment of the linker of a typical zirconium-based MOF (Zr-MOF) (NU-1000), a new isomer of NU-1000 with blocked c-pores, but large mesopores was successfully synthesized. This new isomer, ISO-NU-1000, exhibits excellent water stability, one of the highest water vapor uptake capacities, and excellent cycle stability, making it a promising candidate for water-vapor-sorption-based applications such as water-adsorption-driven heat transfer. We find that the high water-cycling stability of ISO-NU-1000 is traceable to its blocking c-pore that hinders the hydrolysis of node-coordinating formate in the c-pore area and thereby prevents the introduction of node aqua and terminal hydroxo ligands. With the absence of these ligands and their ability to hydrogen-bond to channel-located water molecules, the strength of guest (water)/host (MOF) interactions is diminished and the absolute magnitude of the capillary force exerted by water during its evacuation from MOF channels is attenuated. The attenuation leaves the MOF capable of resisting pore collapse, capacity loss, and crystallinity loss during repetitive evaporative removal (and re-introduction) of water from pores.

Node Distortion as a Tunable Mechanism for Negative Thermal Expansion in Metal-Organic Frameworks

Chemically functionalized series of metal-organic frameworks (MOFs), with subtle differences in local structure but divergent properties, provide a valuable opportunity to explore how local chemistry can be coupled to long-range structure and functionality. Using in situ synchrotron X-ray total scattering, with powder diffraction and pair distribution function (PDF) analysis, we investigate the temperature dependence of the local- and long-range structure of MOFs based on NU-1000, in which Zr₆O₈ nodes are coordinated by different capping ligands (H₂O/OH, Cl^- ions, formate, acetylacetonate, and hexafluoroacetylacetonate). We show that the local distortion of the Zr₆ nodes depends on the lability of the ligand and contributes to a negative thermal expansion (NTE) of the extended framework. Using multivariate data analyses, involving non-negative matrix factorization (NMF), we demonstrate a new mechanism for NTE: progressive increase in the population of a smaller, distorted node state with increasing temperature leads to global contraction of the framework. The transformation between discrete node states is noncooperative and not ordered within the lattice, i.e., a solid solution of regular and distorted nodes. Density functional theory calculations show that removal of ligands from the node can lead to distortions consistent with the Zr···Zr distances observed in the experiment PDF data. Control of the node distortion imparted by the nonlinker ligand in turn controls the NTE behavior. These results reveal a mechanism to control the dynamic structure of MOFs based on local chemistry.

Noncovalent Surface Modification of Metal-Organic Frameworks: Unscrambling Adsorption Properties via Isothermal Titration Calorimetry

Despite the importance of noncovalent interactions in the utilization of metal-organic frameworks (MOFs), using these interactions to functionalize MOFs has rarely been explored. The ease of functionalization and potential for surface-selective functionalization makes modification via noncovalent interactions promising for the creation of porous photocatalytic assemblies. Using isothermal titration calorimetry, photoluminescence measurements, and desorption experiments, we have explored the nature and magnitude of the interactions of [Ru(bpy)₂(bpy-R)]²⁺-functionalized dyes with the surface of MIL-96, where R = C₃, C₈, C₁₂, and C₁₈ alkyl chains of either straight-chain or cyclic conformations. The orientation of the dyes appears to be flat against the surface with respect to the long alkyl chains, and the surface concentration approaches a monolayer at high initial concentrations of dye. Strangely, the dodecyl-functionalized dye, despite having a smaller interaction energy and larger footprint than either octyl-functionalized dye, achieves the highest maximum surface concentration. Based on photoluminescence spectra, desorption experiments, and ITC data, we believe this is due to the core of the dye being lifted from the surface as the chain length increases. Our understanding of these interactions is important for further utilization of this method for the functionalization of the internal and external surface areas of MOFs.

BODIPY-Based Polymers of Intrinsic Microporosity for the Photocatalytic Detoxification of a Chemical Threat

Effective heterogeneous photocatalysts capable of detoxifying chemical threats in practical settings must exhibit outstanding device integrity. We report a copolymerization that yields robust, porous, processible, chromophoric BODIPY (BDP; boron-dipyrromethene)-containing polymers of intrinsic microporosity (BDP-PIMs). Installation of a pentafluorophenyl at the meso position of a BDP produced reactive monomer that when combined with 5,5,6,6-tetrahydroxy-3,3,3,3-tetramethyl-1,1-spirobisindane (TTSBI) and tetrafluoroterephthalonitrile (TFTPN) yields PIM-1. Postsynthetic modification of these polymers yields Br-BDP-PIM-1a and -1b─polymers containing bromine at the 2,6-positions. Remarkably, the brominated polymers display porosity and processability features similar to those of H-BDP-PIMs. Gas adsorption reveals molecular-scale porosity and Brunette-Emmet-Teller surface areas as high as 680 m² g^-1. Electronic absorption spectra reveal charge-transfer (CT) bands centered at 660 nm, while bands arising from local excitations, LE, of BDP and TFTPN units are at 530 and 430 nm, respectively. Fluorescence spectra of the polymers reveal a Förster resonance energy-transfer (FRET) pathway to BDP units when TFTPN units are excited at 430 nm; weak phosphorescence at room temperature indicates a singlet-to-triplet intersystem crossing. The low-lying triplet state is well positioned energetically to sensitize the conversion of ground-state (triplet) molecular oxygen to electronically excited singlet oxygen. Photosensitization capabilities of these polymers toward singlet-oxygen-driven detoxification of a sulfur-mustard simulant 2-chloroethyl ethyl sulfide (CEES) have been examined. While excitation of CT and LE_BDP bands yields weak catalytic activity (t_1/2 > 15 min), excitation to higher energy states of TFTPN induces significant increases in photoactivity (t_1/2 ≅ 5 min). The increase is attributable to (i) enhanced light collection, (ii) FRET between TFTPN and BDP, (iii) the presence of heavy atoms (bromine) having large spin-orbit coupling energies that can facilitate intersystem crossing from donor-acceptor CT-, FRET-, or LE-generated BDP singlet states to BDP-related triplet states, and (iv) polymer triplet excited-state sensitization of the formation of CEES-reactive, singlet oxygen.

Redox-Hopping-Based Charge Transport Mediated by Ru(II)-Polypyridyl Species Immobilized in a Mesoporous Metal-Organic Framework

Electronic charge transport through crystalline metal-organic frameworks (MOFs) can be accomplished by site-to-site electron (or hole) hopping, provided that redox-active sites, such as easily reducible or oxidizable MOF linkers, are present. If the framework itself is redox-inert, solvent-assisted ligand incorporation of redox-active moieties can serve to enable hopping-based charge transport. Here we have studied the redox hopping process within Ru-bpy@NU-1008, where Ru-bpy is a carboxylate-functionalized derivative, i.e., a node-ligating derivative, of the well-known chromophore Ru(2,2′-bipyridine)32+, and NU-1008 is a redox-inert MOF featuring hierarchical porosity and csq topology. Chronoamperometry experiments with electrode-supported thin films of Ru-bpy@NU-1008 show that charge transport is feasible through portions of the MOF, with other portions being inaccessible. Possible confounding features are the undersized c-pores that cross-connect 1D mesoporous channels, as ingress and egress of charge-compensating anions is believed to accompany the net oxidation of Ru(II) to Ru(III) and the reduction of Ru(III) to Ru(II). Phenomenologically, transport through the electroactive portion of the films is diffusion-like, with the magnitude of the apparent diffusion coefficient being 6 × 10−12 cm2/s.

Understanding Diffusional Charge Transport within a Pyrene-Based Hydrogen-Bonded Organic Framework

Electrochemically active hydrogen-bonded organic frameworks (HOFs) offer opportunities to study charge transport in supramolecular systems where the rate of movement of charges is dependent on weak electronic coupling between individual components. Here, we used potential-step chronoamperometric measurements on electrochemically active, drop-cast HOF-102 films to estimate both redox-hopping-based apparent diffusion coefficients for charge transport and rate constants for linker-to-linker charge transfer (hole transfer) in the mesoporous two-dimensional (2D) plane created by interlinker hydrogen bonding. Also present are one-dimensional columns formed by stacking pyrene units. However, because the HOF-102 crystallites containing these columns are oriented parallel to an underlying electrode, dynamics of charge transport (hole-transport) along the column axis, in contrast to the plane, are not directly probed by the electrochemical measurements. Furthermore, we employed electrochemical impedance spectroscopy to measure the electrical conductivity of the as-deposited films biased at various potentials. We found that both the neutral/singly oxidized and the singly oxidized/doubly oxidized pyrene linker redox couples of HOF-102 can engender hopping-based film conductivity within the 2D plane of HOF-102. Consistent with the radical cation and radical dication nature of the singly and doubly oxidized linkers, respectively, HOF-102 films are electrochromic. The measured values of in-plane charge-diffusion coefficients (∼10^-10 to 10^-11 cm² s^-1) and electrical conductivity (∼10^-6 to 10^-8 S cm^-1) compare favorably with those for related redox-conductive MOFs and suggest that the transport and conductivity parameters for HOF-102 are sufficiently large to support electrocatalysis by subsequently installed catalysts in films─specifically, films of micron or greater thickness, corresponding to the equivalent hundreds of monolayers of closely packed (i.e., face-to-face-packed) pyrene-derivatives, but with solution access (solvent, ion, and reactant access) still readily provided by channels oriented parallel to an underlying planar electrode.

MOF-enabled confinement and related effects for chemical catalyst presentation and utilization

A defining characteristic of nearly all catalytically functional MOFs is uniform, molecular-scale porosity. MOF pores, linkers and nodes that define them, help regulate reactant and product transport, catalyst siting, catalyst accessibility, catalyst stability, catalyst activity, co-catalyst proximity, composition of the chemical environment at and beyond the catalytic active site, chemical intermediate and transition-state conformations, thermodynamic affinity of molecular guests for MOF interior sites, framework charge and density of charge-compensating ions, pore hydrophobicity/hydrophilicity, pore and channel rigidity vs. flexibility, and other features and properties. Collectively and individually, these properties help define overall catalyst functional behaviour. This review focuses on how porous, catalyst-containing MOFs capitalize on molecular-scale confinement, containment, isolation, environment modulation, energy delivery, and mobility to accomplish desired chemical transformations with potentially superior selectivity or other efficacy, especially in comparison to catalysts in homogeneous solution environments.

Charge transfer in mixed and segregated stacks of tetrathiafulvalene, tetrathianaphthalene and naphthalene diimide: a structural, spectroscopic and computational study

We report the synthesis of novel charge transfer complexes consisting of TTF or TTN, and DPNI. A spectroscopic and computational approach is taken to elucidate charge transfer in these complexes.