Transabdominal levatorplasty technique in laparoscopic mesh rectopexy for rectal prolapse

Rectal prolapse is characterized by a full-thickness intussusception of the rectal wall and is associated with a spectrum of coexisting anatomic abnormalities. We developed the transabdominal levatorplasty technique for laparoscopic rectopexy, inspired by Altemeier's procedure. In this method, following posterior mesorectum dissection, we expose the levator ani muscle just behind the anorectal junction. Horizontal sutures, using nonabsorbable material, are applied to close levator diastasis associated with rectal prolapse. The aim of the transabdominal levatorplasty is to (i) reinforce the pelvic floor, (ii) narrow the anorectal hiatus, and (iii) reconstruct the anorectal angle. We report a novel transabdominal levatorplasty technique during laparoscopic rectopexy for rectal prolapse. The laparoscopic mesh rectopexy with levatorplasty technique was performed in eight cases: six underwent unilateral Orr-Loygue procedure, one modified Wells procedure, and one unilateral Orr-Loygue procedure combined with sacrocolpopexy for uterine prolapse. The median follow-up period was 178 (33-368) days, with no observed recurrences. Six out of seven patients with fecal incontinence experienced symptomatic improvement. Although the sample size is small and the follow-up period is short, this technique has the potential to reduce the recurrence rate and improve functional outcomes, as with levatorplasty of Altemeier's procedure. We believe that this technique may have the potential to become an option for rectal prolapse surgery.

Single-shot fast cinematic imaging during merging process of multiple electron filaments in electrostatic potential well

For the first time, details of the spatial and temporal acceptable evolution of the merging process of co-rotating electron vortices in a potential well are successfully captured using a "single-shot method" with a high temporal resolution of 10 µs. Four-electron filaments are trapped inside the Beam eXperiment-Upgrade linear trap [H. Himura, Nucl. Instrum. Methods Phys. Res. A 811, 100 (2016)] with a uniform axial magnetic field and co-axial multi-ring electrodes. Images of non-emitting electron filaments are captured using a high-speed camera with up to 1 000 000 fps, a microchannel plate, a fast-decay phosphor screen of which fluorescence duration is 0.15 µs, and a super fine metallic mesh with an open area ratio of 89%. Images captured every 10 µs clearly show the growth of multiple short-wave instabilities in the wing trailing electron vortices. The experimental methods and measurement techniques presented in this paper can contribute to revealing exactly how small vortices evolve into a large structure or turbulence in a potential well through complex processes.

Evaluation of incidence, predictive factors and treatment considerations for asymptomatic genitourinary granulomas after intravesical bacillus Calmette-Guérin therapy

INTRODUCTION AND OBJECTIVES

Although the complications of intravesical BCG treatment are well described, asymptomatic genitourinary granulomas after BCG therapy have rarely been reported and management strategy for these conditions remains controversial. The objective of this study is to evaluate the incidence rate of asymptomatic genitourinary granuloma formation mimicking bladder cancer recurrence after intravesical bacillus Calmette-Guérin (BCG) therapy and to identify the diagnostic and treatment strategies according to patient conditions.

PATIENTS AND METHODS

A retrospective review was conducted on 162 patients who underwent intravesical BCG therapy. For patients who developed granulomas, we evaluated the time interval between BCG instillation and the development of granuloma, the presence of acid-fast bacteria on pathology specimens, culture/polymerase chain reaction results, management strategies for the lesions, and clinical outcomes.

RESULTS

Asymptomatic genitourinary masses developed in 14 patients, of whom 5 underwent histological examinations and all were confirmed to have granulomatous inflammation. The affected organs included the kidney, bladder, prostate, and penis. While four of the five patients did not receive treatment for their granulomas, one patient was administered antituberculous medication to prevent worsening of the lesion during the perioperative period of the scheduled cystoprostatectomy. None of the patients experienced worsening or recurrence of granulomatous lesions. Patients who developed asymptomatic masses (n = 14) were significantly younger than those who did not (p = 0.0076) and multivariate analysis also showed that younger age was independently associated with the development of clinically suspicious lesions (p = 0.032); however, none of the parameters were associated with histologically confirmed granuloma formation.

CONCLUSIONS

Genitourinary granulomas mimicking recurrence of carcinoma may develop in nearly 10% of patients after intravesical BCG therapy. Most patients can be managed without potentially toxic antituberculosis therapy.

Formation and evolution of carbonaceous asteroid Ryugu: Direct evidence from returned samples

Samples of the carbonaceous asteroid Ryugu were brought to Earth by the Hayabusa2 spacecraft. We analyzed 17 Ryugu samples measuring 1 to 8 millimeters. Carbon dioxide-bearing water inclusions are present within a pyrrhotite crystal, indicating that Ryugu's parent asteroid formed in the outer Solar System. The samples contain low abundances of materials that formed at high temperatures, such as chondrules and calcium- and aluminum-rich inclusions. The samples are rich in phyllosilicates and carbonates, which formed through aqueous alteration reactions at low temperature, high pH, and water/rock ratios of <1 (by mass). Less altered fragments contain olivine, pyroxene, amorphous silicates, calcite, and phosphide. Numerical simulations, based on the mineralogical and physical properties of the samples, indicate that Ryugu's parent body formed ~2 million years after the beginning of Solar System formation.

Prediction of clinical outcomes in patients with coronavirus disease 2019 using high-sensitive troponin I and N-terminal pro-B-type natriuretic peptide

Background

Several comorbidities, including cardiovascular diseases or myocardial injury, are reported to be associated with poor prognosis in patients with Coronavirus disease 2019 (COVID-19). However, detailed prognostic analysis of myocardial injury by various biomarkers in COVID-19 patients is limited.

Purpose

This study aims to explore the prognostic values of high-sensitive Troponin I (hsTnI) and N-terminal pro-B-type natriuretic peptide (NT-proBNP) for COVID-19 patients using Japanese real-world data.

Methods

The COVID-MI study is a retrospective cohort study that enrolls consecutive laboratory-confirmed COVID-19 patients admitted to the hospital from July 2020 to September 2021. We collected clinical data, including cardiac biomarker values, by chart review. If the prespecified biomarkers in concern were not available, we measured them using the institutional serum blood bank, which enrolled patients prospectively from July 2020. Patients with available biomarkers were analyzed according to the values of hsTnI or NT-proBNP, using the clinically relevant thresholds (hsTnI: 5 ng/L and 99th percentile of the upper reference limit [99%ile URL], and NT-proBNP: 125 pg/mL and 900 pg/mL). The primary outcome measure was all-cause death. Secondary outcome measures included acute respiratory distress syndrome, myocardial infarction, myocarditis/pericarditis, venous thromboembolism, cerebral infarction, and bleeding events.

Results

We enrolled 917 patients with COVID-19 confirmed by viral nucleic acid amplification test. The mean age was 61 years, and 591 patients (64%) were men. On admission, the number of patients classified as severe or critical COVID-19 was 515 (56%) and 85 (8.7%), respectively. Among the 544 patients with hsTnI values, 365 (67%) patients had elevated hsTnI of ≥5 ng/L, and 134 patients (25%) had TnI of ≥99%ile URL. Besides, among 546 patients with NT-proBNP values, 295 patients (54%) had elevated NT-pro-BNP of ≥125 pg/mL, and 93 patients (17%) had NT-proBNP of ≥900 pg/mL. The median follow-up period was 31 days (interquartile range: 11–90 days). In cumulative incidence analysis, higher levels of hsTnI and NT-proBNP were associated with significantly higher mortality (hsTnI: &lt;5 ng/L group; 8.8%, 5 ng/L to 99%ile URL group; 19%, and ≥99%ile URL group; 37%, P&lt;0.001, and NT-proBNP: &lt;125 pg/mL group; 7.8%, 125 to 900 pg/mL group; 21%, and ≥900 pg/mL group; 45%, P&lt;0.001). The adjusted risk for all-cause death remained significant for each threshold of cardiac biomarkers (hsTnI ≥99%ile URL: hazard ratio [HR] 1.98, 95% confidence interval [CI] 1.11–3.54, P=0.02, and NT-proBNP ≥900 pg/mL: HR 3.60, 95% CI 1.86–6.98, P&lt;0.001).

Conclusion

Elevation of hsTnI or NT-proBNP was associated with poor prognosis in the current relatively severely ill COVID-19 patients. Measuring hsTnI or NT-proBNP can be an attractive option for risk stratification and deciding appropriate management in patients with COVID-19.

Funding Acknowledgement

Type of funding sources: Public hospital(s). Main funding source(s): Institutional Research Fund at Kobe City Medical Center General Hospital

Pebbles and sand on asteroid (162173) Ryugu: In situ observation and particles returned to Earth

The Hayabusa2 spacecraft investigated the C-type (carbonaceous) asteroid (162173) Ryugu. The mission performed two landing operations to collect samples of surface and subsurface material, the latter exposed by an artificial impact. We present images of the second touchdown site, finding that ejecta from the impact crater was present at the sample location. Surface pebbles at both landing sites show morphological variations ranging from rugged to smooth, similar to Ryugu's boulders, and shapes from quasi-spherical to flattened. The samples were returned to Earth on 6 December 2020. We describe the morphology of >5 grams of returned pebbles and sand. Their diverse color, shape, and structure are consistent with the observed materials of Ryugu; we conclude that they are a representative sample of the asteroid.

Height measurement of solder bumps using two-wavelength parallel four-step phase shifting digital holography

Digital holography (DH) with two wavelengths (TW) that are close to each other was applied to height measurement of solder bumps having spherical specular surfaces with diameters of ∼20µm and heights of ∼20µm. We employed the parallel phase shifting method for instantaneous image capturing, and we improved the spatial resolution of our TW-DH system having two beams with different wavelengths that traveled in opposite directions in the interferometer. It gave 74-times higher repetition and 2.4-times higher spatial resolution than those in our previous DH system based on the Fourier transform method.

Systematic evaluation of magnetic sensitivities of anisotropic magnetoresistive sensors at liquid helium temperature for superconducting cavities

Trapped magnetic flux in bulk superconductors reduces the quality factor Q in superconducting radio-frequency (SRF) cavities. However, the mechanisms underlying flux trapping and radio-frequency loss are not well understood. Detailed observation of the magnetic distributions is important for understanding such phenomena. Magnetic field mapping is useful for observing the magnetic field distribution around SRF cavities. Measuring the change in the magnetic field around the cavity elucidates the flux trapping behavior. Anisotropic magnetoresistive (AMR) sensors are inexpensive and small devices that can detect magnetic flux density. The magnetic sensitivities of AMR sensors need to be evaluated at liquid helium temperature for the magnetic field mapping of SRF cavities. In this study, a test stand was constructed to calibrate the magnetic sensitivities of AMR sensors in liquid helium, and 110 AMR sensors were tested using this stand. The magnetic sensitivities were evaluated systematically. A solenoid coil was used to control the uniform external magnetic field and to measure the magnetic sensitivity at low temperatures. All AMR sensors exhibited suitable sensitivities to the magnetic field around the SRF cavity. The variation in these sensitivities in all AMR sensors was ∼1%. The AMR sensors were found to have sufficient sensitivity for mapping the magnetic field around the exterior surface of the SRF cavity.

Development and large volume production of extremely high current density YBa2Cu3O7 superconducting wires for fusion

The fusion power density produced in a tokamak is proportional to its magnetic field strength to the fourth power. Second-generation high temperature superconductor (2G HTS) wires demonstrate remarkable engineering current density (averaged over the full wire), JE, at very high magnetic fields, driving progress in fusion and other applications. The key challenge for HTS wires has been to offer an acceptable combination of high and consistent superconducting performance in high magnetic fields, high volume supply, and low price. Here we report a very high and reproducible JE in practical HTS wires based on a simple YBa2Cu3O7 (YBCO) superconductor formulation with Y2O3 nanoparticles, which have been delivered in just nine months to a commercial fusion customer in the largest-volume order the HTS industry has seen to date. We demonstrate a novel YBCO superconductor formulation without the c-axis correlated nano-columnar defects that are widely believed to be prerequisite for high in-field performance. The simplicity of this new formulation allows robust and scalable manufacturing, providing, for the first time, large volumes of consistently high performance wire, and the economies of scale necessary to lower HTS wire prices to a level acceptable for fusion and ultimately for the widespread commercial adoption of HTS.

Feasibility and safety of early initiation of a PCSK9 (proprotein convertase subtilisin/kexin type 9) inhibitor in patients with acute myocardial infarction undergoing primary PCI

Background

Recent ESC/EAS Guidelines for the management of dyslipidemia stated that the treatment goal of LDL cholesterol (LDL-C) in very high-risk patients is less than 55mg/dl. PCSK9 inhibitors in addition to strong statins could be a useful strategy for rapid and aggressive lowering of LDL-C. However, the feasibility and safety of early initiation of a PCSK9 inhibitor for AMI patients undergoing primary PCI remain unclear.

Objectives

We examined the effects of early initiation of a PCSK9 inhibitor, evolocumab, on lipid profile and inflammatory markers and its safety in AMI patients undergoing primary PCI.

Methods

This study is a single center, randomized, controlled trial involving 102 patients hospitalized for AMI. The patients were randomly assigned 1:1 to the evolocumab group and the control group. Evolocumab (140 mg) was subcutaneously injected within 24 hours after PCI and then every two weeks. All patients received pitavastatin (2mg/day) in addition to the allocated treatment. The primary endpoints were changes in lipid profile and inflammatory markers from baseline to 4 weeks.

Results

102 patients were enrolled between October 2017 and December 2019. 89 patients were ST-segment elevation myocardial infarction (STEMI), 13 patients were non-STEMI. Primary PCI was successfully performed in all patients. 76 patients were statin-naïve. 2 patients were excluded from analyses because they died severe heart failure in acute phase. Finally, 100 patients (evolocumab; n=51 and control; n=49) were analyzed. Baseline LDL-C was 121.6±30.3 mg/dl in the evolocumab group and 124.7±33.6 mg in the control group. Change in LDL-C from the baseline to 4 weeks was −92.4±32.4 mg/dl (−75%) in the evolocumab group and −44.8±32.1 mg/dl (−33.1%) in the control group (mean difference; 47.6mg/dl, 95% CI; 34.8 to 60.4 mg/dl, p&lt;0.001). LDL-C &lt;70mg/dl at 4 weeks was achieved in 96.0% of the evolocumab group as compared with 26.5% of the control group. Further, in the evolocumab group. LDL &lt;55mg/dl was achieved in 92.1% at 2 weeks and 92.1% at 4 weeks. Regarding inflammatory markers, there were no significant difference in change in high-sensitivity C-reactive protein (p=0.49) and tumor necrosis factor-alpha (p=0.63) between two groups even after adjustment of baseline value. No adverse event associated with evolocumab was observed during this study.

Conclusion

In patients with AMI undergoing primary PCI, early initiation of evolocumab rapidly reduced LDL-C without no adverse event, and achieved LDL-C&lt;55mg/dl in most patients within 2 weeks. Early administration of a PCSK9 inhibitor combined with a strong statin could be a feasible and safe treatment for AMI patients undergoing PCI.

Funding Acknowledgement

Type of funding source: None

An artificial impact on the asteroid (162173) Ryugu formed a crater in the gravity-dominated regime

The Hayabusa2 spacecraft investigated the small asteroid Ryugu, which has a rubble-pile structure. We describe an impact experiment on Ryugu using Hayabusa2's Small Carry-on Impactor. The impact produced an artificial crater with a diameter >10 meters, which has a semicircular shape, an elevated rim, and a central pit. Images of the impact and resulting ejecta were recorded by the Deployable CAMera 3 for >8 minutes, showing the growth of an ejecta curtain (the outer edge of the ejecta) and deposition of ejecta onto the surface. The ejecta curtain was asymmetric and heterogeneous and it never fully detached from the surface. The crater formed in the gravity-dominated regime; in other words, crater growth was limited by gravity not surface strength. We discuss implications for Ryugu's surface age.

Images from the surface of asteroid Ryugu show rocks similar to carbonaceous chondrite meteorites

The near-Earth asteroid (162173) Ryugu is a 900-m-diameter dark object expected to contain primordial material from the solar nebula. The Mobile Asteroid Surface Scout (MASCOT) landed on Ryugu's surface on 3 October 2018. We present images from the MASCOT camera (MASCam) taken during the descent and while on the surface. The surface is covered by decimeter- to meter-sized rocks, with no deposits of fine-grained material. Rocks appear either bright, with smooth faces and sharp edges, or dark, with a cauliflower-like, crumbly surface. Close-up images of a rock of the latter type reveal a dark matrix with small, bright, spectrally different inclusions, implying that it did not experience extensive aqueous alteration. The inclusions appear similar to those in carbonaceous chondrite meteorites.

Production method of millimeter-wave absorber with 3D-printed mold

We established a production method of a millimeter-wave absorber by using a 3D-printed mold. The mold has a periodic pyramid shape, and an absorptive material is filled into the mold. This shape reduces the surface reflection. The 3D-printed mold is made from a transparent material in the millimeter-wave range. Therefore, unmolding is not necessary. A significant benefit of this production method is easy prototyping with various shapes and various absorptive materials. We produced a test model and used a two-component epoxy encapsulant as the absorptive material. The test model achieved a low reflectance: ∼1% at 100 GHz. The absorber is sometimes maintained at a low temperature condition for cases in which superconducting detectors are used. Therefore, cryogenic performance is required in terms of a mechanical strength for the thermal cycles, an adhesive strength, and a sufficient thermal conductivity. We confirmed the test-model strength by immersing the model into a liquid-nitrogen bath.

P642What is the most important residual risk after achievement of appropriate low-density lipoprotein cholesterol lowering therapy in secondary prevention of Japanese patients?

Background

In secondary prevention of coronary artery disease, target value of low-density lipoprotein cholesterol (LDL-C) <100mg/dL with using statins is recommended as standard therapy in Japanese guideline. However, impact of residual risks after achievement of standard LDL-C lowering therapy was not fully examined. Furthermore, there is little information whether more strict management of LDL-C lowering is effective to prevent long-term cardiovascular events than standard management.

Purpose

The purpose of this study was to evaluate the relationship between residual risks after achievement of standard LDL-C lowering therapy and long-term coronary events in secondary prevention of Japanese patients.

Methods

From January 2007 to August 2018, 333 patients with previous percutaneous coronary intervention underwent late coronary angiography to examine recurrence of cardiac ischemia beyond the early phase of restenosis. We defined appropriate LDL-C lowering therapy as achieved LDL-C <100mg/dL with using statins. Patients whose achieved LDL-C was <100mg/dL with using statins were classified as Appropriate-group (n=139), and patients who were not using statins or whose achieved LDL-C was ≥100mg/dL were classified as Inappropriate-group (n=194). Endpoints of the study were recurrence of cardiac ischemia as acute coronary syndrome (recurrence-ACS) and any late coronary revascularization.

Results

During average 7.1 years follow-up, 195 patients (59%) underwent any late coronary revascularization. In 91 of those patients, clinical presentation of recurrence-ACS was observed. Kaplan-Meier curve analysis revealed that the incidence of recurrence-ACS and any late coronary revascularization were significantly lower in Appropriate-group than in Inappropriate-group (p=0.017 and p<0.001, respectively). In Appropriate-group, recurrence-ACS was significantly lower in patients with achieved LDL-C <70mg/dL than in those with LDL-C 70 to <100mg/dL (p=0.042), however, any late revascularization was not different between the two groups. On the other hand, in Inappropriate-group, recurrence-ACS was significantly lower in patients with using statins than in those without using statins (p=0.038), and any late revascularization was less frequent in patients with achieved LDL-C <100mg/dL than in those with LDL-C ≥100mg/dL (p=0.035). Moreover, multivariate analysis identified that only LDL-C was an independent predictor of recurrence-ACS in Appropriate-group (HR: 1.047, p=0.006), in contrast, LDL-C (HR: 1.008, p=0.020), using statins (HR: 0.555, p=0.034) and triglyceride (HR: 1.003, p=0.038) were independent predictors of recurrence-ACS in Inappropriate-group.

Conclusions

LDL-C was the most important residual risk of recurrence-ACS even after recommended standard therapy has been achieved. More strict management of LDL-C targeting to <70mg/dL should be considered in secondary prevention of Japanese patients.