Reducing the lateral dose penumbra in IMPT by incorporating transmission pencil beams

OBJECTIVE

In intensity-modulated proton therapy (IMPT), Bragg peaks result in steep distal dose fall-offs, while the lateral IMPT dose fall-off is often less steep than in photon therapy. High-energy pristine transmission ('shoot through') pencil beams have no Bragg peak in the patient, but show a sharp lateral penumbra at the target level. We investigated whether combining Bragg peaks with Transmission pencil beams('IMPT&TPB') could improve head-and-neck plans by exploiting the steep lateral dose fall-off of transmission pencil beams.

APPROACH

Our system for automated multi-criteria IMPT plan optimisation was extended for combined optimisation of BPs and TPBs. The system generates for each patient a Pareto-optimal plan using a generic 'wish-list' with prioritised planning objectives and hard constraints. For eight nasopharynx cancer patients (NPC) and eight oropharynx cancer (OPC) patients, the IMPT&TPB plan was compared to the competing conventional IMPT plan with only Bragg peaks, which was generated with the same optimiser, but without transmission pencil beams.

MAIN RESULTS

Clinical OAR and target constraints were met in all plans. By allowing transmission pencil beams in the optimisation, on average 14 of the 25 investigated OAR plan parameters significantly improved for NPC, and 9 of the 17 for OPC, while only one OPC parameter showed small but significant deterioration. Non-significant differences were found in the remaining parameters. In NPC, cochlea Dmean reduced by up to 17.5 Gy and optic nerve D2% by up to 11.1 Gy.

CONCLUSION

Compared to IMPT, IMPT&TPB resulted in comparable target coverage with overall superior OAR sparing, the latter originating from steeper dose fall-offs close to OARs.

Effects of moxibustion on intestinal barrier function and TLR4/NF-κB p65 signaling pathway in obese rats

OBJECTIVES

To observe the effects of moxibustion on intestinal barrier function and Toll-like receptor 4 (TLR4)/nuclear factor-κB p65 (NF-κB p65) signaling pathway in obese rats and explore the mechanism of moxibustion in the intervention of obesity.

METHODS

Fifty-five Wistar rats of SPF grade were randomly divided into a normal group (10 rats) and a modeling group (45 rats). In the modeling group, the obesity model was established by feeding high-fat diet. Thirty successfully-modeled rats were randomized into a model group, a moxibustion group, and a placebo-control group, with 10 rats in each one. In the moxibustion group, moxibustion was applied at the site 3 cm to 5 cm far from the surface of "Zhongwan" (CV 12), with the temperature maintained at (46±1 ) ℃. In the placebo-control group, moxibustion was applied at the site 8 cm to 10 cm far from "Zhongwan" (CV 12), with the temperature maintained at (38±1) ℃. The intervention was delivered once daily for 8 weeks in the above two groups. The body mass and food intake of the rats were observed before and after intervention in each group. Using ELISA methool, the levels of serum triacylglycerol (TG), total cholesterol (TC) and lipopolysaccharide (LPS) were detected and the insulin resistance index (HOMA-IR) was calculated. HE staining was used to observe the morphology of colon tissue. The mRNA expression of zonula occludens-1 (ZO-1), Occludin, Claudin-1, TLR4 and NF-κB p65 in the colon tissue was detected by quantitative real-time PCR; and the protein expression of ZO-1, Occludin, Claudin-1, TLR4 and NF-κB p65 was detected by Western blot in the rats of each group.

RESULTS

Compared with the normal group, the body mass, food intake, the level of HOMA-IR, and the serum levels of TC, TG and LPS were increased in the rats of the model group (P<0.01); those indexes in the moxibustion group were all reduced when compared with the model group and the placebo-control group respectively (P<0.01, P<0.05). Compared with the normal group, a large number of epithelial cells in the mucosa of colon tissue was damaged, shed, and the inflammatory cells were infiltrated obviously in the interstitium in the rats of the model group. When compared with the model group, in the moxibustion group, the damage of the colon tissue was recovered to various degrees and there were few infiltrated inflammatory cells in the interstitium, while, the epithelial injury of the colon tissue was slightly recovered and the infiltrated inflammatory cells in the interstitium were still seen in the placebo-control group. The mRNA and protein expressions of ZO-1, Occludin and Caudin-1 were decreased in the model group compared with those in the normal group (P<0.01). When compared with the model group and the placebo-control group, the mRNA and protein expressions of these indexes were increased in the moxibustion group (P<0.01, P<0.05). In the model group, the mRNA and protein expressions of TLR4 and NF-κB p65 were increased when compared with those in the normal group (P<0.01), and the mRNA and protein expressions of these indexes were reduced in the moxibustion group when compared with those in the model group and the placebo-control group (P<0.01).

CONCLUSIONS

Moxibustion can reduce the body mass and food intake, regulate the blood lipid and improve insulin resistance in the rats of obesity. It may be related to alleviating inflammatory response through improving intestinal barrier function and modulating the intestinal TLR4/NF-κB p65 signaling pathway.

Small extracellular vesicles facilitate epithelial-mesenchymal transition in chronic rhinosinusitis with nasal polyps via the miR-375-3p/QKI axis

BACKGROUND

Epithelial-mesenchymal transition (EMT) plays a crucial role in the pathogenesis of chronic rhinosinusitis with nasal polyps (CRSwNP). However, the involvement of small extracellular vesicles (sEVs) in EMT and their contributions to CRSwNP has not been extensively investigated.

METHODS

SEVs were isolated from nasal mucosa through ultracentrifugation. MicroRNA sequencing and reverse-transcription quantitative polymerase chain reaction were employed to analyze the differential expression of microRNAs carried by sEVs. Human nasal epithelial cells (hNECs) were used to assess the EMT-inducing effect of sEVs/microRNAs. EMT-associated markers were detected by western blotting and immunofluorescence. Dual-luciferase reporter assay was performed to determine the target gene of miR-375-3p. MicroRNA mimic, lentiviral, and plasmid transduction were used for functional experiments.

RESULTS

In line with the greater EMT status in eosinophilic CRSwNP (ENP), sEVs derived from ENP (ENP-sEVs) could induce EMT in hNECs. MiR-375-3p was elevated in ENP-sEVs compared to that in control and nonENP. MiR-375- 3p carried by ENP-sEVs facilitated EMT by directly targeting KH domain containing RNA binding (QKI) at seed sequences of 913-919, 1025-1033, and 2438-2444 in 3'-untranslated region. Inhibition of QKI by miR-375-3p overexpression promoted EMT, which could be reversed by restoration of QKI. Furthermore, the abundance of miR-375-3p in sEVs was closely correlated with the clinical symptom score and disease severity.

CONCLUSIONS

MiR-375-3p-enriched sEVs facilitated EMT by suppressing QKI in hNECs. The association of miR-375-3p with disease severity underscores its potential as both a diagnostic marker and a therapeutic target for the innovative management of CRSwNP.

First-line Palliative Chemotherapy for Colorectal Cancer: a Population-based Analysis of Delivery and Outcomes in a Single-payer Health System

AIMS

Clinical practice guidelines recommend palliative chemotherapy for most patients with metastatic colorectal cancer. However, outcomes observed in the real world compared with patients enrolled in clinical trials have not been sufficiently described. The objective of this study was to evaluate the delivery and outcomes of first-line palliative chemotherapy administered to patients with colorectal cancer in routine clinical practice compared with clinical trials.

MATERIALS AND METHODS

Using linked health administrative data, we carried out a retrospective population-level cohort study on patients diagnosed with colorectal cancer in Ontario, Canada from 2010 to 2019. Patient, disease and treatment characteristics were summarised. The primary outcome was median overall survival, stratified by treatment prescribed and age. Demographics and outcomes in this real-world population were compared with those from pivotal clinical trials. A multivariable Cox regression model reporting hazard ratios and 95% confidence intervals was used to determine factors associated with survival in patients receiving systemic treatment.

RESULTS

We identified 70 987 patients with a new diagnosis of colorectal cancer, of which 4613 received first-line chemotherapy for unresectable locally advanced or metastatic disease and formed the study cohort. Fifty-eight per cent were male and the mean age was 63 years. Most had colon cancer (69%), at least one comorbidity (73%) and lived in an urban location (79%). Less than half (47%) had surgery after diagnosis. The most common regimen prescribed was folinic acid, 5-fluorouracil and irinotecan (FOLFIRI) with bevacizumab or epidermal growth factor receptor inhibitors (EGFRi; n = 2784, 60%). Among all treated patients, the median overall survival was 17.1 months, with survival difference by regimen [median overall survival 18.3 for FOLFIRI with bevacizumab or EGFRi, 19.6 for folinic acid, 5-fluorouracil and oxaliplatin (FOLFOX)/capecitabine, oxaliplatin (XELOX) with bevacizumab or EGFRi, 13.6 for FOLFIRI alone and 7.8 for 5-fluorouracil or capecitabine]. Patients aged >80 years were most likely to have received single-agent 5-fluorouracil or capecitabine, and had inferior overall survival compared with their younger counterparts. Compared with pivotal clinical trials, patients in the real world had inferior overall survival outcomes despite similar demographic characteristics (including age and sex).

CONCLUSIONS

In this real-world population-based analysis of patients receiving first-line chemotherapy for unresectable locally advanced or metastatic colorectal cancer, survival outcomes were inferior to those reported in randomised trials despite similarities in age and sex. This information can be used when counselling patients in routine practice about expected outcomes.

SISS-MCO: large scale sparsity-induced spot selection for fast and fully-automated robust multi-criteria optimisation of proton plans

Objective.Intensity modulated proton therapy (IMPT) is an emerging treatment modality for cancer. However, treatment planning for IMPT is labour-intensive and time-consuming. We have developed a novel approach for multi-criteria optimisation (MCO) of robust IMPT plans (SISS-MCO) that is fully automated and fast, and we compare it for head and neck, cervix, and prostate tumours to a previously published method for automated robust MCO (IPBR-MCO, van de Water 2013).Approach.In both auto-planning approaches, the applied automated MCO of spot weights was performed with wish-list driven prioritised optimisation (Breedveld 2012). In SISS-MCO, spot weight MCO was applied once for every patient after sparsity-induced spot selection (SISS) for pre-selection of the most relevant spots from a large input set of candidate spots. IPBR-MCO had several iterations of spot re-sampling, each followed by MCO of the weights of the current spots.Main results.Compared to the published IPBR-MCO, the novel SISS-MCO resulted in similar or slightly superior plan quality. Optimisation times were reduced by a factor of 6 i.e. from 287 to 47 min. Numbers of spots and energy layers in the final plans were similar.Significance.The novel SISS-MCO automatically generated high-quality robust IMPT plans. Compared to a published algorithm for automated robust IMPT planning, optimisation times were reduced on average by a factor of 6. Moreover, SISS-MCO is a large scale approach; this enables optimisation of more complex wish-lists, and novel research opportunities in proton therapy.

The retropharyngeal reduction plate for atlantoaxial dislocation: a finite element analysis

Objective: To investigate the biomechanical properties of the retropharyngeal reduction plate by comparing the traditional posterior pedicle screw-rod fixation by finite element analysis. Methods: Two three-dimensional finite element digital models of the retropharyngeal reduction plate and posterior pedicle screw-rod fixation were constructed and validated based on the DICOM (Digital Imaging and Communications in Medicine) data from C1 to C4. The biomechanical finite element analysis values of two internal fixations were measured and calculated under different conditions, including flexion, extension, bending, and rotation. Results: In addition to the backward extension, there was no significant difference in the maximum von Mises stress between the retropharyngeal reduction plate and posterior pedicle screw fixation under other movement conditions. The retropharyngeal reduction plate has a more uniform distribution under different conditions, such as flexion, extension, bending, and rotation. The stress tolerance of the two internal fixations was basically consistent in flexion, extension, left bending, and right bending. Conclusion: The retropharyngeal reduction plate has a relatively good biomechanical stability without obvious stress concentration under different movement conditions. It shows potential as a fixation option for the treatment of atlantoaxial dislocation.

Advances in 3D Printing of Highly Bioadaptive Bone Tissue Engineering Scaffolds

The number of patients with bone defects caused by trauma, bone tumors, and osteoporosis has increased considerably. The repair of irregular, recurring, and large bone defects poses a great challenge to clinicians. Bone tissue engineering is emerging as an appropriate strategy to replace autologous bone grafting in the repair of critically sized bone defects. However, the suitability of bone tissue engineering scaffolds in terms of structure, mechanics, degradation, and the microenvironment is inadequate. Three-dimensional (3D) printing is an advanced additive-manufacturing technology widely used for bone repair. 3D printing constructs personalized structurally adapted scaffolds based on 3D models reconstructed from CT images. The contradiction between the mechanics and degradation is resolved by altering the stacking structure. The local microenvironment of the implant is improved by designing an internal pore structure and a spatiotemporal factor release system. Therefore, there has been a boom in the 3D printing of personalized bone repair scaffolds. In this review, successful research on the preparation of highly bioadaptive bone tissue engineering scaffolds using 3D printing is presented. The mechanisms of structural, mechanical, degradation, and microenvironmental adaptations of bone prostheses and their interactions were elucidated to provide a feasible strategy for constructing highly bioadaptive bone tissue engineering scaffolds.

Effects of empagliflozin on progression of chronic kidney disease: a prespecified secondary analysis from the empa-kidney trial

BACKGROUND

Sodium-glucose co-transporter-2 (SGLT2) inhibitors reduce progression of chronic kidney disease and the risk of cardiovascular morbidity and mortality in a wide range of patients. However, their effects on kidney disease progression in some patients with chronic kidney disease are unclear because few clinical kidney outcomes occurred among such patients in the completed trials. In particular, some guidelines stratify their level of recommendation about who should be treated with SGLT2 inhibitors based on diabetes status and albuminuria. We aimed to assess the effects of empagliflozin on progression of chronic kidney disease both overall and among specific types of participants in the EMPA-KIDNEY trial.

METHODS

EMPA-KIDNEY, a randomised, controlled, phase 3 trial, was conducted at 241 centres in eight countries (Canada, China, Germany, Italy, Japan, Malaysia, the UK, and the USA), and included individuals aged 18 years or older with an estimated glomerular filtration rate (eGFR) of 20 to less than 45 mL/min per 1·73 m2, or with an eGFR of 45 to less than 90 mL/min per 1·73 m2 with a urinary albumin-to-creatinine ratio (uACR) of 200 mg/g or higher. We explored the effects of 10 mg oral empagliflozin once daily versus placebo on the annualised rate of change in estimated glomerular filtration rate (eGFR slope), a tertiary outcome. We studied the acute slope (from randomisation to 2 months) and chronic slope (from 2 months onwards) separately, using shared parameter models to estimate the latter. Analyses were done in all randomly assigned participants by intention to treat. EMPA-KIDNEY is registered at ClinicalTrials.gov, NCT03594110.

FINDINGS

Between May 15, 2019, and April 16, 2021, 6609 participants were randomly assigned and then followed up for a median of 2·0 years (IQR 1·5-2·4). Prespecified subgroups of eGFR included 2282 (34·5%) participants with an eGFR of less than 30 mL/min per 1·73 m2, 2928 (44·3%) with an eGFR of 30 to less than 45 mL/min per 1·73 m2, and 1399 (21·2%) with an eGFR 45 mL/min per 1·73 m2 or higher. Prespecified subgroups of uACR included 1328 (20·1%) with a uACR of less than 30 mg/g, 1864 (28·2%) with a uACR of 30 to 300 mg/g, and 3417 (51·7%) with a uACR of more than 300 mg/g. Overall, allocation to empagliflozin caused an acute 2·12 mL/min per 1·73 m2 (95% CI 1·83-2·41) reduction in eGFR, equivalent to a 6% (5-6) dip in the first 2 months. After this, it halved the chronic slope from -2·75 to -1·37 mL/min per 1·73 m2 per year (relative difference 50%, 95% CI 42-58). The absolute and relative benefits of empagliflozin on the magnitude of the chronic slope varied significantly depending on diabetes status and baseline levels of eGFR and uACR. In particular, the absolute difference in chronic slopes was lower in patients with lower baseline uACR, but because this group progressed more slowly than those with higher uACR, this translated to a larger relative difference in chronic slopes in this group (86% [36-136] reduction in the chronic slope among those with baseline uACR <30 mg/g compared with a 29% [19-38] reduction for those with baseline uACR ≥2000 mg/g; ptrend<0·0001).

INTERPRETATION

Empagliflozin slowed the rate of progression of chronic kidney disease among all types of participant in the EMPA-KIDNEY trial, including those with little albuminuria. Albuminuria alone should not be used to determine whether to treat with an SGLT2 inhibitor.

FUNDING

Boehringer Ingelheim and Eli Lilly.

Factors influencing the detection rate of fumarate peak in 1H MR spectroscopy of fumarate hydratase-deficient renal cell carcinoma at 3 T MRI

AIM

To identify factors that may be associated with fumarate detection rate in 1H-magnetic resonance spectroscopy (MRS) in fumarate hydratase-deficient renal cell carcinoma (FH-RCC).

MATERIALS AND MEHODS

Between February 2018 and March 2022, 16 FH-RCC patients with 30 lesions underwent 1H-MRS. Detection results were classified as having a detected fumarate peak (n=12), undetected peak (n=10), or technical failure (n=8). Factors including tumour size, tumour location, treatment history, and metastasis status were collected and analysed. A Bayesian logistic regression model was applied to evaluate the association between these factors and the detection result.

RESULTS

Bayesian analysis demonstrated significant associations between fumarate detection results and the following factors: long-axis diameter (odds ratio [OR] of 1.64; 95% confidence interval [CI] of 1.07-2.53), short-axis diameter (OR of 1.90; 95% CI of 1.19-3.06), voxel size (OR of 2.85; 95% CI of 1.70-4.75), treatment history (OR of 0.35; 95% CI of 0.21-0.58), non-metastatic state (OR of 2.45; 95% CI of 1.48-4.06), and lymph node metastasis (OR of 0.35; 95% CI of 0.21-0.58). Technical failure results were associated with factors such as treatment history (OR of 2.59; 95% CI of 1.37-4.66), non-metastatic state (OR of 0.36; 95% CI of 0.19-0.66), and lymph node metastasis (OR of 2.61; 95% CI of 1.39-4.74).

CONCLUSION

Tumour size, treatment history, and metastasis character were associated with the detection of abnormal fumarate accumulation. This finding will serve as a reference for interpreting 1H-MRS results and for selecting suitable scenarios to evaluate FH-RCC.

Impact of primary kidney disease on the effects of empagliflozin in patients with chronic kidney disease: secondary analyses of the EMPA-KIDNEY trial

BACKGROUND

The EMPA-KIDNEY trial showed that empagliflozin reduced the risk of the primary composite outcome of kidney disease progression or cardiovascular death in patients with chronic kidney disease mainly through slowing progression. We aimed to assess how effects of empagliflozin might differ by primary kidney disease across its broad population.

METHODS

EMPA-KIDNEY, a randomised, controlled, phase 3 trial, was conducted at 241 centres in eight countries (Canada, China, Germany, Italy, Japan, Malaysia, the UK, and the USA). Patients were eligible if their estimated glomerular filtration rate (eGFR) was 20 to less than 45 mL/min per 1·73 m2, or 45 to less than 90 mL/min per 1·73 m2 with a urinary albumin-to-creatinine ratio (uACR) of 200 mg/g or higher at screening. They were randomly assigned (1:1) to 10 mg oral empagliflozin once daily or matching placebo. Effects on kidney disease progression (defined as a sustained ≥40% eGFR decline from randomisation, end-stage kidney disease, a sustained eGFR below 10 mL/min per 1·73 m2, or death from kidney failure) were assessed using prespecified Cox models, and eGFR slope analyses used shared parameter models. Subgroup comparisons were performed by including relevant interaction terms in models. EMPA-KIDNEY is registered with ClinicalTrials.gov, NCT03594110.

FINDINGS

Between May 15, 2019, and April 16, 2021, 6609 participants were randomly assigned and followed up for a median of 2·0 years (IQR 1·5-2·4). Prespecified subgroupings by primary kidney disease included 2057 (31·1%) participants with diabetic kidney disease, 1669 (25·3%) with glomerular disease, 1445 (21·9%) with hypertensive or renovascular disease, and 1438 (21·8%) with other or unknown causes. Kidney disease progression occurred in 384 (11·6%) of 3304 patients in the empagliflozin group and 504 (15·2%) of 3305 patients in the placebo group (hazard ratio 0·71 [95% CI 0·62-0·81]), with no evidence that the relative effect size varied significantly by primary kidney disease (pheterogeneity=0·62). The between-group difference in chronic eGFR slopes (ie, from 2 months to final follow-up) was 1·37 mL/min per 1·73 m2 per year (95% CI 1·16-1·59), representing a 50% (42-58) reduction in the rate of chronic eGFR decline. This relative effect of empagliflozin on chronic eGFR slope was similar in analyses by different primary kidney diseases, including in explorations by type of glomerular disease and diabetes (p values for heterogeneity all >0·1).

INTERPRETATION

In a broad range of patients with chronic kidney disease at risk of progression, including a wide range of non-diabetic causes of chronic kidney disease, empagliflozin reduced risk of kidney disease progression. Relative effect sizes were broadly similar irrespective of the cause of primary kidney disease, suggesting that SGLT2 inhibitors should be part of a standard of care to minimise risk of kidney failure in chronic kidney disease.

FUNDING

Boehringer Ingelheim, Eli Lilly, and UK Medical Research Council.

Biomechanical evaluation of different posterior fixation techniques for treating thoracolumbar burst fractures of osteoporosis old patients: a finite element analysis

Objective: To investigate the biomechanical characteristics of different posterior fixation techniques in treatment of osteoporotic thoracolumbar burst fractures by finite element analysis. Methods: The Dicom format images of T10-L5 segments were obtained from CT scanning of a volunteer, and transferred to the Geomagic Studio software, which was used to build digital models. L1 osteoporotic burst fracture and different posterior fixation techniques were simulated by SolidWorks software. The data of ROM, the maximum displacement of fixed segment, ROM of fractured L1 vertebrae, the stress on the screws and rods as well as on fractured L1 vertebrae under different movement conditions were collected and analysed by finite element analysis. Results: Among the four groups, the largest ROM of fixed segment, the maximum displacement of fixed segment and ROM of fractured vertebrae occurred in CBT, and the corresponding data was 1.3°, 2.57 mm and 1.37°, respectively. While the smallest ROM of fixed segment, the maximum displacement of fixed segment and ROM of fractured vertebrae was found in LSPS, and the corresponding data was 0.92°, 2.46 mm and 0.89°, respectively. The largest stress of screws was 390.97 Mpa, appeared in CBT, and the largest stress of rods was 84.68 MPa, appeared in LSPS. The stress concentrated at the junction area between the root screws and rods. The maximum stress on fractured vertebrae was 93.25 MPa, appeared in CBT and the minimum stress was 56.68 MPa, appeared in CAPS. And the stress of fractured vertebrae concentrated in the middle and posterior column of the fixed segment, especially in the posterior edge of the superior endplate. Conclusion: In this study, long-segment posterior fixation (LSPF) provided with the greatest stability of fixed segment after fixation, while cortical bone screw fixation (CBT) provided with the smallest stability. Cement-augmented pedicle screw-rod fixation (CAPS) and combined using cortical bone screw and pedicle screw fixation (CBT-PS) provided with the moderate stability. CBT-PS exhibited superiority in resistance of rotational torsion for using multiple connecting rods. CAPS and CBT-PS maybe biomechanically superior options for the surgical treatment of burst TL fractures in osteoporotic patients.

Photocurable 3D-Printed PMBG/TCP Scaffold Coordinated with PTH (1-34) Bidirectionally Regulates Bone Homeostasis to Accelerate Bone Regeneration

Bone defect repair remains a major clinical challenge that requires the construction of scaffolds that can regulate bone homeostasis. In this study, a photo-cured mesoporous bioactive glass (PMBG) precursor is developed as a tricalcium phosphate (TCP) agglomerant to obtain a double-phase PMBG/TCP scaffold via 3D printing. The scaffold exhibits multi-scale porous structures and large surface areas, making it a suitable carrier for the loading of parathyroid hormone (PTH) (1-34), which is used for the treatment of osteoporosis. In vitro and in vivo results demonstrate that PMBG/TCP scaffolds coordinated with PTH (1-34) can regulate bone homeostasis in a bidirectional manner to facilitate bone formation and inhibit bone resorption. Furthermore, bidirectional regulation of bone homeostasis by PTH (1-34) is achieved by inhibiting fibrogenic activation protein (FAP). Thus, PMBG/TCP scaffolds coordinated with PTH (1-34) are viable materials with considerable potential for application in the field of bone regeneration and provide an excellent solution for the design and development of clinical materials.

Photocurable 3D-printed PMBG/TCP biphasic scaffold mimicking vasculature for bone regeneration

Mesoporous bioglass (MBG) with excellent osteointegration, osteoinduction, and biodegradability is a promising material for bone regeneration. However, its clinical application is hindered by complex processing and a lack of personalization, low mechanical strength, and uncontrollable degradation rate. In this study, we developed a double-bond-functionalized photocurable mesoporous bioglass (PMBG) sol that enabled ultrafast photopolymerization within 5 s. By further integrating nanosized tricalcium phosphate (TCP) particles through three-dimensional (3D) printing technology, we fabricated personalized and highly porous PMBG/TCP biphasic scaffolds. The mechanical properties and degradation behavior of the scaffolds were regulated by varying the amount of TCP doping. In vitro and in vivo experiments verified that PMBG/TCP scaffolds slowly released SiO₄^4- and Ca²⁺, forming a vascularized bone regeneration microenvironment within the fully interconnected pore channels of the scaffold. This microenvironment promoted angiogenesis and accelerated bone tissue regeneration. Overall, this work demonstrates the solution to the problem of complex processing and lack of personalization in bioglass scaffolds, and the developed PMBG/TCP biphasic scaffold is an ideal material for bone regeneration applications with broad clinical prospects.

DWI-Based Radiomics Predicts the Functional Outcome of Endovascular Treatment in Acute Basilar Artery Occlusion

BACKGROUND AND PURPOSE

Endovascular treatment is a reference treatment for acute basilar artery occlusion (ABAO). However, no established and specific methods are available for the preoperative screening of patients with ABAO suitable for endovascular treatment. This study explores the potential value of DWI-based radiomics in predicting the functional outcomes of endovascular treatment in ABAO.

MATERIALS AND METHODS

Patients with ABAO treated with endovascular treatment from the BASILAR registry (91 patients in the training cohort) and the hospitals in the Northwest of China (31 patients for the external testing cohort) were included in this study. The Mann-Whitney U test, random forests algorithm, and least absolute shrinkage and selection operator were used to reduce the feature dimension. A machine learning model was developed on the basis of the training cohort to predict the prognosis of endovascular treatment. The performance of the model was evaluated on the independent external testing cohort.

RESULTS

A subset of radiomics features (n = 6) was used to predict the functional outcomes in patients with ABAO. The areas under the receiver operating characteristic curve of the radiomics model were 0.870 and 0.781 in the training cohort and testing cohort, respectively. The accuracy of the radiomics model was 77.4%, with a sensitivity of 78.9%, specificity of 75%, positive predictive value of 83.3%, and negative predictive value of 69.2% in the testing cohort.

CONCLUSIONS

DWI-based radiomics can predict the prognosis of endovascular treatment in patients with ABAO, hence allowing a potentially better selection of patients who are most likely to benefit from this treatment.

3D bioprinting tumor models mimic the tumor microenvironment for drug screening

Cancer is a severe threat to human life and health and represents the main cause of death globally. Drug therapy is one of the primary means of treating cancer; however, most anticancer medications do not proceed beyond preclinical testing because the conditions of actual human tumors are not effectively mimicked by traditional tumor models. Hence, bionic in vitro tumor models must be developed to screen for anticancer drugs. Three-dimensional (3D) bioprinting technology can produce structures with built-in spatial and chemical complexity and models with accurately controlled structures, a homogeneous size and morphology, less variation across batches, and a more realistic tumor microenvironment (TME). This technology can also rapidly produce such models for high-throughput anticancer medication testing. This review describes 3D bioprinting methods, the use of bioinks in tumor models, and in vitro tumor model design strategies for building complex tumor microenvironment features using biological 3D printing technology. Moreover, the application of 3D bioprinting in vitro tumor models in drug screening is also discussed.

Complete uni-port video-assisted thoracoscopic surgery for surgical stabilization of rib fractures: a case report

BACKGROUND

Rib fractures are a common injury in trauma. Potential complications include pain, pneumonia, respiratory failure, disability, and death. Surgical stabilization of rib fractures (SSRF) has become an available treatment option, and complete video-assisted thoracoscopic surgery (VATS) for SSRF is gradually accepted because of minimally invasive and pain relief. To our knowledge, complete uni-port VATS for SSRF has not yet been reported.

CASE PRESENTATION

A 53-year-old man accidentally fell off a three-meter high scaffolding while working resulting in severe chest pain and shortness of breath. He was found with left 7th through 11th rib fractures with a pulmonary contusion from computed tomography (CT). A 4 cm incision was made in the 7th intercostal space in the midaxillary line, and complete uni-port VATS for SSRF were operated. The patient's pain was significantly relieved after the operation, and the scar was tiny and unapparent.

CONCLUSIONS

Complete uni-port VATS for SSRF is a novel and modificatory method of operation with the benefit of minimal invasion, meanwhile, intrathoracic injuries could be treated at the same time. Further study is warranted.

Effects of epicardial adipose tissue volume and thickness assessed by computed tomography and echocardiography on cardiovascular and cerebrovascular outcomes: a systematic review and meta-analysis

Funding Acknowledgements

Type of funding sources: None.

Background

Epicardial adipose tissue (EAT) has garnered attention as a potential imaging biomarker for the risk stratification of cardiovascular diseases (CVD). However, the prognostic utility of EAT due to inter-ethnic differences and imaging modality (computed tomography (CT) or transthoracic echocardiography (TTE)) remains undetermined.

Purpose

To evaluate the effect of EAT volume and thickness on cardiovascular and cerebrovascular outcomes. We also aim to compare the prognostic utility between CT volumetric and TTE thickness quantification; and provide consolidated data on the heterogeneity in EAT measurements across different ethnic groups.

Methods

Medline and Embase databases were searched from inception till 16 May 2022 for studies that measured EAT volume or thickness of adult patients at baseline and reported follow-up data on outcomes of interest. Outcomes included MACE, all-cause mortality, cardiac death, myocardial infarction (MI), coronary revascularisation, atrial fibrillation (AF), and stroke. Statistical analyses were conducted on Review Manager 5.4.1 to obtain unadjusted and adjusted hazard ratios (HR) and odds ratios (OR) with the results presented on forest plots.

Results

Twenty-nine studies comprising 19709 patients were included in our analysis. Increased EAT thickness and volume were associated with higher risks of MACE (adjusted HR [aHR] 1.46, 95%CI 1.25–1.71, p&lt;0.001), cardiac death (OR 2.53, 95%CI 1.17–5.44, p=0.020), MI (OR 2.63, 95%CI 1.39–4.96, p=0.003), coronary revascularisation (OR 2.99, 95%CI 1.64–5.44, p&lt;0.001), AF (aOR 4.04, 95%CI 3.06–5.32, p&lt;0.001), and stroke (HR 1.02, 95%CI 1.01–1.03, p&lt;0.001). CT-volumetric quantification of EAT conferred a larger MACE risk (aHR 1.79, 95%CI 1.47–2.17, p&lt;0.001) compared to TTE thickness quantification (aHR 1.20, 95%CI 1.09–1.32, p&lt;0.001). Studies originating from North America (HR 1.91, 95%CI 1.26–2.89, p=0.002) and Asia (HR 1.60, 95%CI 1.09–2.36, p=0.020) demonstrated a significantly higher risk of MACE with increased EAT thickness and volume. However, this significance was not seen in European studies (HR 1.48, 95%CI 0.99–2.20, p=0.060). Subgroup differences were also noted across the studies’ countries of origin when analysing the association of EAT and MI (p=0.020). European studies reported a higher magnitude of MI risk associated with higher EAT thickness and volume (OR 5.28, 95%CI 2.34–11.95, p&lt;0.001) as compared to Asian studies (OR 1.75, 95%CI 1.05–2.92, p=0.030). No differences were noted across other outcomes in the subgroup comparisons by geographical region and between CT and TTE quantification of EAT.

Conclusion

The utility of EAT as an imaging biomarker for predicting and prognosticating CVD is promising. Future efforts to harmonise the EAT parameter thresholds, based on the type of imaging modality and the target population’s ethnic characteristics, will be the next important step before including EAT in CVD prediction models.

Dual-Nozzle 3D Printed Nano-Hydroxyapatite Scaffold Loaded with Vancomycin Sustained-Release Microspheres for Enhancing Bone Regeneration

Background

Successful treatment of infectious bone defect remains a major challenge in the orthopaedic field. At present, the conventional treatment for infectious bone defects is surgical debridement and long-term systemic antibiotic use. It is necessary to develop a new strategy to achieve effective bone regeneration and local anti-infection for infectious bone defects.

Methods

Firstly, vancomycin / poly (lactic acid-glycolic acid) sustained release microspheres (VAN/PLGA-MS) were prepared. Then, through the dual-nozzle 3D printing technology, VAN/PLGA-MS was uniformly loaded into the pores of nano-hydroxyapatite (n-HA) and polylactic acid (PLA) scaffolds printed in a certain proportion, and a composite scaffold (VAN/MS-PLA/n-HA) was designed, which can not only promote bone repair but also resist local infection. Finally, the performance of the composite scaffold was evaluated by in vivo and in vitro biological evaluation.

Results

The in vitro release test of microspheres showed that the release of VAN/PLGA-MS was relatively stable from the second day, and the average daily release concentration was about 15.75 μg/mL, which was higher than the minimum concentration specified in the guidelines. The bacteriostatic test in vitro showed that VAN/PLGA-MS had obvious inhibitory effect on Staphylococcus aureus ATCC-29213. Biological evaluation of VAN/MS-PLA/n-HA scaffolds in vitro showed that it can promote the proliferation of adipose stem cells. In vivo biological evaluation showed that VAN/MS-PLA/n-HA scaffold could significantly promote bone regeneration.

Conclusion

Our research shows that VAN/MS-PLA/n-HA scaffolds have satisfying biomechanical properties, effectively inhibit the growth of Staphylococcus aureus, with good biocompatibility, and effectiveness on repairing bone defects. The VAN/MS-PLA/n-HA scaffold provide the clinic with an application prospect in bone tissue engineering.

Ultrahigh Content Boron and Nitrogen Codoped Hierarchically Porous Carbon Obtained from Biomass Byproduct Okara for Capacitive Deionization

Capacitive deionization (CDI) is an environmentally friendly, energy efficient, and low cost water purification technique in comparison with other conventional techniques, and it has attracted considerable attention in recent years. Here, we use biomass byproduct okara as the starting material to fabricate a boron and nitrogen codoped hierarchically porous carbon (BNC) with ultrahigh heteroatom contents and abundant in-plane nanoholes for CDI application. With the interconnected hierarchical porous structure, the BNC not only exhibits a large surface area (647.0 m³ g^-1) for the adsorption of ions but also offers abundant ion transport channels to access the entire internal surface. Meanwhile, the ultrahigh dopants' content of B (11.9 at%) and N (14.8 at%) further gives rise to the increased surface polarity and enhanced capacitance for BNC. Owing to these favorable properties, BNC exhibits top-level salt adsorption capacity (21.5 mg g^-1) and charge efficiency (59.5%) at the initial NaCl concentration of ∼500 mg L^-1. Moreover, we performed first-principle simulations to explore the different effects between N-doping and N,B-codoping on the capacitive property, which indicate that the boron and nitrogen codoping of carbon can largely increase the quantum capacitance over the double layer capacitance. The results of this work suggest a promising prospect for the BNC material in practical CDI application.

Cohort profile: the ESC EURObservational Research Programme Non-ST-segment elevation myocardial infraction (NSTEMI) Registry

AIMS

The European Society of Cardiology (ESC) EURObservational Research Programme (EORP) Non-ST-segment elevation myocardial infarction (NSTEMI) Registry aims to identify international patterns in NSTEMI management in clinical practice and outcomes against the 2015 ESC Guidelines for the management of acute coronary syndromes in patients presenting without ST-segment-elevation.

METHODS AND RESULTS

Consecutively hospitalised adult NSTEMI patients (n = 3620) were enrolled between 11 March 2019 and 6 March 2021, and individual patient data prospectively collected at 287 centres in 59 participating countries during a two-week enrolment period per centre. The registry collected data relating to baseline characteristics, major outcomes (in-hospital death, acute heart failure, cardiogenic shock, bleeding, stroke/transient ischaemic attack, and 30-day mortality) and guideline-recommended NSTEMI care interventions: electrocardiogram pre- or in-hospital, pre-hospitalization receipt of aspirin, echocardiography, coronary angiography, referral to cardiac rehabilitation, smoking cessation advice, dietary advice, and prescription on discharge of aspirin, P2Y12 inhibition, angiotensin converting enzyme inhibitor (ACEi)/angiotensin receptor blocker (ARB), beta-blocker, and statin.

CONCLUSION

The EORP NSTEMI Registry is an international, prospective registry of care and outcomes of patients treated for NSTEMI, which will provide unique insights into the contemporary management of hospitalised NSTEMI patients, compliance with ESC 2015 NSTEMI Guidelines, and identify potential barriers to optimal management of this common clinical presentation associated with significant morbidity and mortality.

Thermosensitive hydrogel loaded with concentrated growth factors promote bone repair in segmental bone defects

Treating critical-size bone defects beyond the body’s self-healing capacity is a challenging clinical task. In this study, we investigate the effect of concentrate growth factors (CGFs) loaded Poloxamer 407 hydrogel on the viability and osteogenic differentiation potential of bone marrow mesenchymal stem cells (BMSCs) and reconstruction of critical-size bone defects. In vitro, this CGFs-loaded thermosensitive hydrogel can significantly promote proliferation, maintain cell viability, and induce osteogenic differentiation of BMSCs by up-regulating the mineralization and alkaline phosphatase (ALP) activity, as well as gene markers, including runt-related transcription factor-2 (Runx-2), type I collagen (Col-1), osteocalcin (OCN), as well as osteopontin (OPN). In vivo, Micro-CT radiography analysis and histological detection demonstrated that the CGFs-loaded hydrogel significantly induced bone healing and reconstructed the medullary cavity structure in critical-size bone defect models. In conclusion, this strategy of transplantation of CGFs-loaded hydrogel promoted bone regeneration and prevented bone nonunion, so as to provide basis for clinical treatment for repairing critical-size bone defects.

The complete chloroplast genome sequences of three Broussonetia species and comparative analysis within the Moraceae

Background

Species of Broussonetia (family Moraceae) are commonly used to make textiles and high-grade paper. The distribution of Broussonetia papyrifera L. is considered to be related to the spread and location of humans. The complete chloroplast (cp) genomes of B. papyrifera, Broussonetia kazinoki Sieb., and Broussonetia kaempferi Sieb. were analyzed to better understand the status and evolutionary biology of the genus Broussonetia.

Methods

The cp genomes were assembled and characterized using SOAPdenovo2 and DOGMA. Phylogenetic and molecular dating analysis were performed using the concatenated nucleotide sequences of 35 species in the Moraceae family and were based on 66 protein-coding genes (PCGs). An analysis of the sequence divergence (pi) of each PCG among the 35 cp genomes was conducted using DnaSP v6. Codon usage indices were calculated using the CodonW program.

Results

All three cp genomes had the typical land plant quadripartite structure, ranging in size from 160,239 bp to 160,841 bp. The ribosomal protein L22 gene (RPL22) was either incomplete or missing in all three Broussonetia species. Phylogenetic analysis revealed two clades. Clade 1 included Morus and Artocarpus, whereas clade 2 included the other seven genera. Malaisia scandens Lour. was clustered within the genus Broussonetia. The differentiation of Broussonetia was estimated to have taken place 26 million years ago. The PCGs' pi values ranged from 0.0005 to 0.0419, indicating small differences within the Moraceae family. The distribution of most of the genes in the effective number of codons plot (ENc-plot) fell on or near the trend line; the slopes of the trend line of neutrality plots were within the range of 0.0363-0.171. These results will facilitate the identification, taxonomy, and utilization of the Broussonetia species and further the evolutionary studies of the Moraceae family.

Metabolic associated fatty liver disease increases risk of adverse events after acute coronary syndrome

 

Metabolic Associated Fatty Liver Disease (MAFLD) was recently introduced as an alternative definition for fatty liver, that has been linked to an increased risk of systemic end-organ damage. However, current studies have not examined the impact of MAFLD on patients presenting with acute coronary syndrome (ACS). Here, we present a retrospective analysis on the short and long-term outcomes of ACS patients with MAFLD.

Methods

A retrospective analysis was conducted in a tertiary care centre. Hepatic steatosis and fibrosis was examined with hepatic steatosis index and fibrosis-4 (FIB-4) index. The primary and secondary outcomes of the analysis were long term all-cause mortality, and in-hospital all-cause mortality, stroke, heart failure and cardiogenic shock respectively. Adjusted analysis was conducted for primary and secondary outcomes with covariates including age, sex, race, type of ACS and previous myocardial infarction.

Results

A total of 5770 patients were included in the analysis, and 21% of ACS patients had concomitant MAFLD. MAFLD resulted in a 23% increase in long-term all-cause mortality compared to non-MAFLD (HR: 1.230, CI: 1.065 to 1.420, p=0.005). MAFLD increased the risk of in-hospital mortality, stroke, heart failure and cardiogenic shock compared to non-MAFLD. A sensitivity analysis conducted based on MAFLD with advance fibrosis, chronic kidney disease and diabetes also demonstrated significantly increased effect size magnitude of all-cause mortality, compared to non-MAFLD.

Conclusion

MAFLD represents an encapsulation of metabolism dysregulation and has been associated with increased risk of systematic disease. The present study shows that MAFLD is associated with significantly increased adverse prognostic outcomes after ACS compared to non-MAFLD. An increase in awareness of MAFLD is required beyond the field of hepatology for improvements in multidisciplinary care and management.

Funding Acknowledgement

Type of funding sources: None.