Effects of supplementing rumen-protected arginine on performance of transition cows

An experiment was conducted to determine the effects of supplementing rumen-protected arginine (RPA) on productive performance in dairy cows. One-hundred and 2 cows were blocked by parity and then by energy-corrected milk (ECM) yield. Within block, cows were randomly assigned to control (CON) that received 200 g/d of a mixture of hydrogenated soybean oil and heat-treated soybean meal to supply 30 g of metabolizable protein (MP), or 200 g/d of a product containing 30 g of metabolizable arginine (RPA), which increased the dietary arginine from 5.7 to 7.5% of the MP from 250 d of gestation to 21 d postpartum. After 21 d postpartum, cows were fed the same diet and data were collected until 84 d postpartum. Cows fed RPA produced an additional 2.5 kg of colostrum (5.3 vs. 7.8 ± 1.0 kg) and 220 g more immunoglobulin G (526 vs. 746 ± 93 g) than CON cows. Supplementing RPA increased the yields of milk (32.8 vs. 34.9 ± 1.0 kg/d), ECM (37.8 vs. 40.9 ± 1.2 kg/d), and milk total solids (4.48 vs. 4.86 ± 0.14 kg/d) in the first 21 DIM. The benefits of RPA extended beyond the period of supplementation, with a 6.4% increase in yield of ECM per kg of dry matter consumed in all cows (1.88 vs. 2.00 ± 0.05 kg/kg) and an increase in ECM yield, but only in parous cows (44.2 vs. 48.5 ± 1.5 kg/d). Feeding RPA increased the concentrations of urea N in plasma pre- (12.5 vs. 13.9 ± 0.4 mg/dL) and postpartum (11.6 vs. 13.2 ± 0.4 mg/dL), and in milk during the first 21 d postpartum (11.0 vs. 12.0 ± 0.3 mg/dL). Treatment did not affect the concentrations of AA in plasma prepartum, but feeding RPA tended to increase citrulline (72.5 vs. 77.5 ± 2.7 μM), whereas RPA either tended to decrease isoleucine (129.5 vs. 120.9 ± 5.7 μM) or decreased the concentrations of leucine (181.3 vs. 170.2 ± 6.4 μM) and valine (293.2 vs. 276.7 ± 10.4 μM) postpartum. Feeding RPA increased the relative expression of transcripts involved in AA transport (SLC38A4), urea cycle (ARG1), and gluconeogenesis (PC, PEPCK, and G6PC) in hepatic tissue. Feeding diets to supply additional arginine as RPA during the transition period benefited productive performance in dairy cows that extended beyond the period of supplementation despite minor changes in plasma AA concentrations.

Feeding rumen-protected lysine prepartum alters placental metabolism at a transcriptional level

Rumen-protected Lys (RPL) fed to Holstein cows prepartum resulted in a greater intake and improved health of their calves during the first 6 wk of life. However, whether increased supply of Lys in late gestation can influence placental tissue and, if so, which pathways are affected remain to be investigated. Therefore, we hypothesize that feeding RPL during late gestation could modulate placental metabolism, allowing for improved passage of nutrients to the fetus and thus influencing the offspring development. Therefore, we aimed to determine the effects of feeding RPL (AjiPro-L Generation 3, Ajinomoto Health and Nutrition North America) prepartum (0.54% DM of TMR) on mRNA gene expression profiles of placental samples of Holstein cows. Seventy multiparous Holstein cows were randomly assigned to 1 of 2 dietary treatments, consisting of TMR top-dressed with RPL (PRE-L) or without (control, CON), fed from 27 ± 5 d prepartum until calving. After natural delivery (6.87 ± 3.32 h), placentas were rinsed with physiological saline (0.9% sodium chloride solution) to clean any dirtiness from the environment and weighed. Then, 3 placentomes were collected, one from each placental region (cranial, central, and caudal), combined and flash-frozen in liquid nitrogen to evaluate the expression of transcripts and proteins related to protein metabolism and inflammation. Placental weights did not differ from cows in PRE-L (15.5 ± 4.03 kg) and cows in CON (14.5 ± 4.03 kg). Feeding RPL prepartum downregulated the expression of NOS3 (nitric oxide synthase 3), involved in vasodilation processes, and SOD1, which encodes the enzyme superoxide dismutase, involved in oxidative stress processes. Additionally, feeding RPL prepartum upregulated the expression of transcripts involved in energy metabolism (SLC2A3, glucose transporter 3; and PCK1, phosphoenolpyruvate carboxykinase 1), placental metabolism and cell proliferation (FGF2, fibroblast growth factor 2; FGF2R, fibroblast growth factor 2 receptor; and PGF, placental growth factor), Met metabolism (MAT2A, methionine adenosyltransferase 2-α), and tended to upregulate IGF2R (insulin-like growth factor 2 receptor). Placental FGF2 and LRP1 (low-density lipoprotein receptor-related protein 1) protein abundance were greater for cows that received RPL prepartum than cows in CON. In conclusion, feeding RPL to prepartum dairy cows altered uteroplacental expression of genes and proteins involved in cell proliferation, and in metabolism and transport of glucose. Such changes are illustrated by increased expression of SLC2A3 and PCK1 and increased protein abundance of FGF2 and LRP1 in uteroplacental tissue of cows consuming RPL.

Feeding rumen-protected lysine altered immune and metabolic biomarkers in dairy cows during the transition period

This experiment was conducted to determine the effects of feeding rumen-protected lysine (RPL; AjiPro-L Generation 3, Ajinomoto Health and Nutrition North America Inc.) from -26 ± 4.6 d prepartum (0.54% RPL of dietary dry matter intake) to 28 d postpartum (0.39% RPL of dietary dry matter intake) on immunometabolic status and liver composition in dairy cows. Seventy-five multiparous Holstein cows, blocked by parity, previous 305-d mature-equivalent milk production, expected calving date, and body condition score during the far-off dry period were assigned to 1 of 4 dietary treatments in a randomized, complete block design with a 2 × 2 factorial arrangement of treatments. Treatments prepartum consisted of total mixed ration top dressed with RPL (PRE-L) or without RPL (PRE-C), and postpartum treatments consisted of total mixed ration top dressed PRE-L prepartum and postpartum, PRE-L prepartum and PRE-C postpartum, PRE-C prepartum and PRE-L postpartum, and PRE-C prepartum and postpartum in 300 g of molasses. Blood samples were taken on -7 ± 0.5, 0 ± 0.5, 7 ± 0.9, 14 ± 0.9, and 28 ± 0.5 d relative to calving. Whole blood samples were taken on -14 ± 0.5, -7 ± 0.5, 7 ± 0.9, and 14 ± 0.9 d relative to calving for oxidative burst and phagocytic capacity of monocytes and neutrophils. Liver samples were collected via a biopsy on -12 ± 4.95 and 13 ± 2.62 d relative to calving and analyzed for liver composition (triacylglyceride and carnitine concentrations), mRNA expression of hepatic genes, and protein abundance. Protein abundance was calculated by normalizing intensity bands for a specific protein with glyceraldehyde-3-phosphate dehydrogenase. Concentrations of haptoglobin and glutathione peroxidase activity in plasma were lower at d 0 for cows in PRE-L (102 µg/mL and 339 nmol/min per mL, respectively) compared with cows in PRE-C (165 µg/mL and 405 nmol/min per mL, respectively). Oxidative burst capacity in monocytes tended to be greater on d 7 postpartum for cows in PRE-L (65.6%) than cows in PRE-C (57.5%). Additionally, feeding RPL altered the mRNA expression in liver tissue prepartum [decreased INSR (insulin receptor), CPT1A (carnitine palmitoyltransferase 1A), and IL1B (interleukin 1 β)] and postpartum [increased IL8 (interleukin 8), EHMT2 (euchromatic histone lysine methyltransferase 2), TSPO (translocator protein), and SLC3A2 (solute carrier family 3 member 2); and decreased SLC7A1 (solute carrier family 7 member 1), SOD1 (superoxide dismutase 1), and SAA3 (serum amyloid A 3)] compared with cows not consuming RPL]. Additionally, cows in the PRE-C prepartum and PRE-L postpartum treatment tended to have greater protein abundance of mTOR postpartum compared with the PRE-C prepartum and postpartum treatment. Protein abundance of SLC7A7 (solute carrier family 7 member 7) pre- and postpartum tended to be greater and BBOX1 (gamma-butyrobetaine dioxygenase 1) tended to be less when RPL was consumed prepartum. In conclusion, cows that consumed RPL during the transition period had molecular changes related to liver composition, enhanced liver function indicated by greater total protein and albumin concentrations in plasma, and improved immune status indicated by decreased haptoglobin, glutathione peroxidase activity, and immune related mRNA expression.

On-surface synthesis of hydroxy-functionalized graphene nanoribbons through deprotection of methylenedioxy groups

We demonstrate on-surface deprotection of methylenedioxy groups which yielded graphene nanoribbons (GNRs) with edges functionalized by hydroxy groups. While anthracene trimer precursors functionalized with hydroxy groups did not yield GNRs, it was found that hydroxy groups are first protected as methylenedioxy groups and then deprotected during the cyclo-dehydrogenation process to form GNRs with hydroxy groups. The X-ray photoemission spectroscopy and non-contact atomic force microscopy studies revealed that ∼20% of the methylenedioxy turned into hydroxy groups, while the others were hydrogen-terminated. The first-principles density functional theory (DFT) study on the cyclo-dehydrogenation process was performed to investigate the deprotection mechanism, which indicates that hydrogen atoms emerging during the cyclo-dehydrogenation process trigger the deprotection of methylenedioxy groups. The scanning tunneling spectroscopy study and DFT revealed a significant charge transfer from hydroxy to the Au substrate, causing an interface dipole and the HOMO being closer to the Fermi level when compared with hydrogen-terminated GNR/Au(111). This result demonstrates on-surface deprotection and indicates a possible new route to obtain GNRs with desired edge functionalization, which can be a critical component for high-performance devices.

Seeing how ice breaks the rule

Basic defects in ice monolayers are seen using a microscope

Feeding rumen-protected lysine to dairy cows prepartum improves performance and health of their calves

Providing adequate concentrations of AA in the prepartum diet is pivotal for the cow's health and performance. However, less is known about the potential in utero effects of particular AA on early-life performance of calves. This experiment was conducted to determine the effects on dairy calves when their dams were fed rumen-protected lysine (RPL; AjiPro-L Generation 3, Ajinomoto Heartland Inc.; 0.54% dry matter of total mixed ration as top dress) from 26 ± 4.6 d (mean ± standard deviation) before calving until calving. Seventy-eight male (M) and female (F) Holstein calves were assigned to 2 treatments based on their dams' prepartum treatment, RPL supplementation (PRE-L) or without RPL (CON). At the time of birth (0.5-2 h after calving), before colostrum was fed, blood samples were collected. An initial body weight was obtained at 1 to 3 h after birth. Calves were fed 470 g of colostrum replacer (Land O'Lakes Bovine IgG Colostrum Replacer, Land O'Lakes, Inc.) diluted in 3.8 L of water. Calves were provided water ad libitum and fed milk replacer (Advance Excelerate, Milk Specialties Global Animal Nutrition; 28.5% crude protein, 15% fat) at 0600 h and 1700 h until 42 d of age. Calves were measured weekly, at weaning (d 42), and at the end of the experimental period (d 56). Plasma concentrations of AA were measured on d 0, 7, and 14 d using ultra-performance liquid chromatography-mass spectrometry (Waters) with a derivatization method (AccQ-Tag Derivatization). Final body weight was greater for M (87 ± 11 kg) than F (79 ± 7 kg). Calves in PRE-L tended to have greater dry matter (814 ± 3 g/d) and crude protein (234 ± 6 g/d) intakes than those in CON (793 ± 9 g/d and 228 ± 11 g/d, respectively). Calves in PRE-L had greater average daily gain (0.96 ± 0.04 kg/d) than calves in CON (0.85 ± 0.03 kg/d) during wk 6 to 8. Calves in PRE-L tended to be medicated fewer days than CON (4.7 ± 1.2 d vs. 6.2 ± 3.4 d, respectively). Calves in PRE-L-M and CON-F (2,916 ± 112 µM and 2,848 ± 112 µM, respectively) had greater total AA concentration in plasma than calves in PRE-L-F and CON-M (2,684 ± 112 µM and 2,582 ± 112 µM, respectively). Calves in PRE-L-F and CON-M (4.09 ± 0.11% and 4.16 ± 0.11%, respectively) had greater concentration of Lys as a percentage of total AA compared with calves in CON-F and PRE-L-M (3.91 ± 0.11% and 3.90 ± 0.11%, respectively). Calves in PRE-L tended to have greater percentage of phagocytic neutrophils (39.6 ± 1.59%) than calves in CON (35.9 ± 1.59%). In conclusion, increasing the metabolizable lysine provided to prepartum dairy cows had modest effect over offspring performance, with the major result being a greater average daily gain for calves in PRE-L during the preweaning phase (wk 6-8).

Mechanically induced single-molecule helicity switching of graphene-nanoribbon-fused helicene on Au(111)

Helicene is a functional material with chirality caused by its characteristic helical geometry. The inversion of its helicity by external stimuli is a challenging task in the advanced control of the molecular chirality. This study fabricated a novel helical molecule, specifically a pentahelicene-analogue twisted aromatic hydrocarbon fused with a graphene nanoribbon, via on-surface synthesis using multiple precursors. Noncontact atomic force microscopy imaging with high spatial resolution confirmed the helicity of the reaction products. The helicity was geometrically converted by pushing a CO-terminated tip into the twisted framework, which is the first demonstration of helicity switching at the single-molecule scale.

Measurement of axial phase difference of density fluctuations owing to spontaneously excited waves by using microwave reflectometer on GAMMA 10/PDX

In the GAMMA 10/PDX tandem mirror, plasma with strong ion-temperature anisotropy is produced by using the ion cyclotron range of frequency waves. This anisotropy of ion temperature causes several Alfvén-Ion-Cyclotron (AIC) waves to spontaneously excite in the frequency range just below the ion cyclotron frequency. In addition, difference-frequency (DF) waves are excited in the radial inner region of the plasma by wave-wave coupling among the AIC waves. The radial density profiles were measured at multi-axial positions using a frequency-modulation reflectometer with an axial array of microwave antennas, and an axial variation of the density was found to be significant. In addition, a relative phase difference of the DF wave between axially separated two points was first obtained by finely choosing the probing frequency of the reflectometers with a maximum coherence used as a measure, indicating that the DF wave is a propagating wave, while the pump AIC waves are standing waves in the axial region of measurement.

Role of Intermolecular Interactions in the Catalytic Reaction of Formic Acid on Cu(111)

Formic acid (HCOOH) can be catalytically decomposed into H₂ and CO₂ and is a promising hydrogen storage material. As H₂ production catalysts, Cu surfaces allow selective HCOOH decarboxylation; however, the on-surface HCOOH decomposition reaction pathway remains controversial. In this study, the temperature dependence of the HCOOH/Cu(111) adsorption structures is elucidated by scanning tunneling microscopy and non-contact atomic force microscopy, establishing the adsorbate chemical species using density functional theory. 2D HCOOH islands at 80 K, linear chains of HCOOH and monodentate formate at 150 K, chain-like assemblies of monodentate and bidentate formate at 200 K, and bidentate formate clusters at 300 K are observed. At each temperature, the adsorbates experience attractive interactions among themselves. Such aggregation stabilizes them against desorption and decomposition. Thus, accurate evaluation of intermolecular interactions is essential to understand catalytic reactivity.

Role of tip apices in scanning force spectroscopy on alkali halides at room temperature-chemical nature of the tip apex and atomic-scale deformations

We have revealed processes of the tip apex distortion in the measurements of non-contact scanning force microscopy. High-spatial-resolution two-dimensional force mapping on KCl(100) surfaces for a large number of tips, seven tips, enabled us to see the complex behavior of the tip apex distortion. The tips are from Si without additional coating, but are altered by the tip-sample interaction and show the behavior of different atomic species. On the KCl(001) surfaces, the tip apex, consisting of K and Cl atoms or of Si, distorted several times while changing the distance even in a weak attractive region. There are variations in rigidity of the tip apex, but all tips distorted in the small attractive region. This complex behavior was categorized in patterns by our analyses. We compare the experimental force-distance data to atomistic simulations using rigid KCl-terminated tips and KCl-terminated tips with an additional KCl-pair designed to perform atomic jumps. We also compare the experimental force-distance data to first principles simulations using Si tips. We mainly find K-terminated tips and Si-terminated tips. We find that Si tips show only one force minimum whereas KCl-terminated tips show two force minima in line with the stronger rigidity of Si compared to KCl. At room temperature, the tip apex atoms can perform atomic jumps that change the atomic configuration of the tip apex.

Manipulable Metal Catalyst for Nanographene Synthesis

Performing bottom-up synthesis by using molecules adsorbed on a surface is an effective method to yield functional polycyclic aromatic hydrocarbons (PAHs) and nanocarbon materials. The intramolecular cyclodehydrogenation of hydrocarbons is a critical process in this synthesis; however, thus far, its elementary steps have not been elucidated thoroughly. In this study, we utilize the metal tip of a low-temperature noncontact atomic force microscope as a manipulable metal surface to locally activate dehydrogenation for PAH-forming cyclodehydrogenation. This method leads to the dissociation of a H atom of an intermediate to yield the cyclodehydrogenated product in a target-selective and reproducible manner. We demonstrate the metal-tip-catalyzed dehydrogenation for both benzenoid and nonbenzonoid PAHs, suggesting its universal applicability as a catalyst for nanographene synthesis.

Feeding rumen-protected lysine prepartum increases energy-corrected milk and milk component yields in Holstein cows during early lactation

Feeding rumen-protected Lys (RPL) may be used to increase lactation performance in dairy cows; however, the effect of feeding RPL during the prepartum period and subsequent effect on postpartum performance is not well explored. Therefore, this experiment was conducted to determine the effects of feeding RPL (AjiPro-L Generation 3, Ajinomoto Heartland Inc., Chicago, IL) prepartum, postpartum, or both on performance, health, and blood metabolites. Seventy-five multiparous Holstein cows, blocked by parity, previous 305-d mature-equivalent milk production, expected calving date, and body condition score during the far-off dry period were assigned to 1 of 2 dietary treatments: total mixed ration with or without RPL in a randomized, complete block design. A 2 × 2 factorial arrangement of treatments was used. Prepartum (-28 d to calving), animals were fed a diet (forage, 68% of dietary DM) with RPL [PRE-L; 0.54% RPL of dietary dry matter intake (DMI)] or without RPL (control; PRE-C). After calving, half of the cows from each prepartum treatment group were assigned to a diet (forage, 55.5% of dietary DM) with RPL (PRE-L POST-L; PRE-C POST-L; 0.40% RPL of dietary DMI) or without RPL (PRE-C POST-C; PRE-L POST-C) until d 28 postpartum. Cows were milked twice a day and milk samples were taken on 7 ± 1.3, 14 ± 1.4, and 28 ± 1.1 d relative to calving (DRC). Milk yield and DMI were recorded daily. Blood samples were taken for plasma AA analysis on -7 ± 0.5, 0 ± 0.5, 7 ± 0.9, and 14 ± 0.9 DRC. Cows in PRE-L had greater body weight at -2 and -1 wk before calving compared with those in PRE-C, though body weight change from wk -4 to -1 was not different. Body weight (717 ± 6 kg) was greater and DMI (18.1 ± 0.7 kg) tended to be greater for cows in PRE-L POST-L and PRE-L POST-C compared with those that were in PRE-C POST-L and PRE-C POST-C (707 ± 6 and 16.8 ± 0.7 kg, respectively). Energy-corrected milk (48.8 ± 1.9 kg/d), milk fat (1.9 ± 0.1 kg/d), milk true protein (1.4 ± 0.1 kg/d), milk casein (0.6 ± 0.04 kg/d), and milk lactose yields (2.1 ± 0.1 kg/d) were greater for cows in PRE-L POST-L and PRE-L POST-C compared with those that were in PRE-C POST-L and PRE-C POST-C (44.2 ± 1.9, 1.7 ± 0.1, 1.3 ± 0.1, 0.5 ± 0.04, 1.9 ± 0.1 kg/d, respectively). Plasma concentrations of Lys prepartum (69.8 ± 1.8 µM) increased for cows in PRE-L compared with those in PRE-C (62.5 ± 1.3 µM). In conclusion, RPL consumed prepartum tended to increase postpartum DMI and increased energy-corrected milk and milk component yields. This indicates that prepartum supply of intestinally available Lys is pertinent to postpartum performance. However, postpartum supply of intestinally available Lys had no effect on cows' performance.

Intrinsic reconstruction of ice-I surfaces

Understanding the precise atomic structure of ice surfaces is critical for revealing the mechanisms of physical and chemical phenomena at the surfaces, such as ice growth, melting, and chemical reactions. Nevertheless, no conclusive structure has been established. In this study, noncontact atomic force microscopy was used to address the characterization of the atomic structures of ice Ih(0001) and Ic(111) surfaces. The topmost hydrogen atoms are arranged with a short-range (2 × 2) order, independent of the ice thickness and growth substrates used. The electrostatic repulsion between non-hydrogen-bonded water molecules at the surface causes a reduction in the number of the topmost hydrogen atoms together with a distortion of the ideal honeycomb arrangement of water molecules, leading to a short-range-ordered surface reconstruction.

Quality control of on-surface-synthesised seven-atom wide armchair graphene nanoribbons

On-surface synthesis is a powerful method for fabricating atomically precise graphene nanoribbons (GNRs), but the products always include defective structures. In this study, scanning tunnelling microscopy and atomic force microscopy were used to determine the length distribution of armchair-edge GNRs with a width of seven carbon atoms (7-AGNRs) synthesised on Au(111) and to characterise defective structures. The product quality was improved by increasing the precursor deposition amount because of a preference for intermolecular polymerisation over intramolecular cyclodehydrogenation at a high coverage. However, the annealing rate had a complex effect on the quality, with a low rate elongating 7-AGNRs but degenerating the length uniformity. These insights advance the understanding of the critical parameters for obtaining high-quality products in high yield by on-surface synthesis.

Chemical Identification of the Foremost Tip Atom in Atomic Force Microscopy

Chemical identification of individual surface atoms has been achieved by measuring the chemical bonds between tip and surface atoms using atomic force microscopy. On the other hand, the discrimination of chemical species at the tip apex is still a challenging task, even though the differences of the species have significant effects on atomic-scale contrast and atom manipulation. Here, we perform the chemical identification of a foremost tip atom using bond energies measured on precharacterized atomic species on a Si surface. We find that chemically different tips show different trends in the chemical bond energy on the sites and that Pauling's equation for polar covalent bonds well describes those trends. On the basis of this knowledge, in situ chemical identification becomes possible. Using the chemically identified (here, Si and Al) tips, we determine the electronegativity of locally formed silicon oxide solely by experiments. Previously such determination was difficult without the help of theoretical calculations. These successful results confirm the validity and versatility of Pauling's equation for application to atomic-scale objects.

Detection of Spin Transfer from Metal to Molecule by Magnetoresistance Measurement

Localized electronic spin state in molecules has a relatively long spin lifetime and has thus attracted much attention. In this study, we characterize the magnetoresistance of a system comprising Pt and Fe(II)-phthalocyanine (FePc) molecules. The magnetoresistance measurement with the weak antilocalization analysis reveals that a magnetic moment in FePc acts as magnetic impurities for conduction electrons in Pt. Moreover, we find that the magnetoresistance involves a component that possesses the same symmetry as spin-Hall magnetoresistance. These results reveal the spin-angular momentum transfer from metallic Pt to a magnetic moment in FePc molecules, which can be used as a spin torque in a molecular system.

Realization of Spin-dependent Functionality by Covering a Metal Surface with a Single Layer of Molecules

An interface of molecule and metal has attracted much attention in the research field of nanoelectronics because of their high degree of design freedom. Here, we demonstrate an efficient spin-to-charge current conversion at the metal surface covered by a single layer of molecules. Spin currents are injected into an interface between metal (Cu) and lead(II) phthalocyanine by means of the spin pumping method. An observed voltage signal is caused by the inverse Edelstein effect, i.e., spin-to-charge current conversion at the interface. The conversion coefficient, inverse Edelstein length, is estimated to be 0.40 ± 0.06 nm, comparable with the largest Rashba spin splitting of interfaces with heavy metals. Interestingly, the Edelstein length strongly depends on the thickness of the molecule and takes a maximum value when a single layer of molecules is formed on the Cu surface. Comparative analysis between scanning probe microscopy and first-principles calculations reveal that the formation of interface state with Rashba spin splitting causes the inverse Edelstein effect, whose magnitude is sensitive to the adsorption configuration of the molecules.

P4764Relationship of the duration of pulmonary vein isolation-refractory non-paroxysmal atrial fibrillation to the middle- to long-term outcome of the ExTRa Mapping-guided ablation

Introduction

It is reported that for patients with non-paroxysmal (persistent or long-standing persistent) atrial fibrillation (Non-PAF), extended ablation to atrial walls in addition to pulmonary vein isolation (PVI) did not improve the long-term outcome. On the other hand, modulation of Non-PAF drivers (or perpetuators) has been proposed as one of the alternative effective ablation strategies for Non-PAF.

Purpose

To clarify whether the rotor ablation under online real-time high-density phase mapping system is effective for PVI-refractory Non-PAF ablation.

Methods

Under such circumstances, our academic group had recently developed the online real-time high-density phase mapping system (ExTRa Mapping™) by industrial alliance. The phase map moving images were based on 41 intra-atrial bipolar signals recorded by a 20-pole spiral-shaped catheter (2.5 cm in diameter) and on in silicorapid prediction of spatio-temporal atrial excitations (artificial intelligence system). Then we applied the ExTRa Mapping to clinical practice in order to directly visualize rotors in patients with Non-PAF, and investigated the middle- to long-term outcome of the ExTRa Mapping-guided rotor ablation (ExTRa-ABL).

Results

Thirty-eight patients (63±8 y/o, 30 males) with Non-PAF demonstrating refractoriness to PVI were enrolled in this study. Ablation for cavo-tricuspid isthmus and/or superior vena cava isolation was additionally performed at physicians' discretion. After these procedures, the ExTRa-ABL was performed in order to modify Non-PAF substrates, causing rotor control. The modification of the rotors was evaluated by re-mapping with the use of the ExTRa Mapping at the end of each ablation session. Patients were followed at 1, 3, 6 months and every year after the procedure. All of them were followed for 21±8 months. During the follow-up period, Non-PAF was recurred in only 8 of 38 (21%). Furthermore, we found if PVI-refractory Non-PAF duration was shorter than 6 years, the non-recurrence rate remained ≥80% (see Figure), which was markedly better outcome comparing with previous reports with regard to Non-PAF ablation.

Figure 1

Conclusion

Comparing with conventional Non-PAF ablation strategies, our novel approach with the use of the online real-time high-density phase mapping system might improve medium- to long-term outcome of PVI-refractory Non-PAF treatment.

Torque-Induced Change in Configuration of a Single NO Molecule on Cu(110)

We demonstrated that a nitric oxide (NO) molecule on Cu(110) acts as an "ON-OFF-ON toggle switch" that can be turned on and off by repulsive force and electron injection, respectively. On the surface, NO molecules exist in three configurations: flat along the [001] direction (ON), upright (OFF), and flat along [001[over ¯]] (ON). An NO-functionalized tip, which was characterized by scanning tunneling microscopy and inelastic electron tunneling spectroscopy, can convert an upright NO adsorbate into a flat-lying NO. Atomic force microscopy and a simulation of the interactions between the NO molecules reveal that a repulsive force not aligned with the N-O bond provides the torque that detrudes the NO toggle; i.e., the upright NO adsorbate is tilted away from the tip. Therefore, the NO adsorbate behaves as a nonvolatile sensor for the detection of locally applied repulsive torque.

Synthesis, Structures, and Properties of Core-Expanded Azacoronene Analogue: A Twisted π-System with Two N-Doped Heptagons

A core-expanded, pyrrole-fused azacoronene analogue containing two unusual N-doped heptagons was obtained from commercially available octafluoronaphthalene and 3,4-diethylpyrrole in two steps as a heteroatom-doped nonplanar nanographene. Full fusion with the formation of the tetraazadipleiadiene framework and the longitudinally twisted structure was unambiguously confirmed by single-crystal X-ray diffraction analysis. The edge-to-edge dihedral angle along the acene moiety was 63°. This electron-rich π-system showed four reversible oxidation peaks. Despite the nonplanar structure, the Hückel aromaticity owing to a peripheral π-conjugation in the dicationic state was concluded from the bond-length alternation and nucleus-independent chemical shift (NICS) and anisotropy of the induced current density (ACID) calculations.

Prospects for observing and localizing gravitational-wave transients with Advanced LIGO, Advanced Virgo and KAGRA

We present possible observing scenarios for the Advanced LIGO, Advanced Virgo and KAGRA gravitational-wave detectors over the next decade, with the intention of providing information to the astronomy community to facilitate planning for multi-messenger astronomy with gravitational waves. We estimate the sensitivity of the network to transient gravitational-wave signals, and study the capability of the network to determine the sky location of the source. We report our findings for gravitational-wave transients, with particular focus on gravitational-wave signals from the inspiral of binary neutron star systems, which are the most promising targets for multi-messenger astronomy. The ability to localize the sources of the detected signals depends on the geographical distribution of the detectors and their relative sensitivity, and [Formula: see text] credible regions can be as large as thousands of square degrees when only two sensitive detectors are operational. Determining the sky position of a significant fraction of detected signals to areas of 5-[Formula: see text] requires at least three detectors of sensitivity within a factor of [Formula: see text] of each other and with a broad frequency bandwidth. When all detectors, including KAGRA and the third LIGO detector in India, reach design sensitivity, a significant fraction of gravitational-wave signals will be localized to a few square degrees by gravitational-wave observations alone.

The local electronic properties of individual Pt atoms adsorbed on TiO2(110) studied by Kelvin probe force microscopy and first-principles simulations

Noble metal nanostructures dispersed on metal oxide surfaces have applications in diverse areas such as catalysis, chemical sensing, and energy harvesting. Their reactivity, chemical selectivity, stability, and light absorption properties are controlled by the interactions at the metal/oxide interface. Single-atom metal adsorbates on the rutile TiO₂(110)-(1 × 1) surface have become a paradigmatic model to characterize those interactions and to understand the unique electronic properties of these supported nanostructures. We combine Kelvin probe force microscopy (KPFM) experiments and density functional theory (DFT) calculations to investigate the atomic-scale variations in the contact potential difference of individual Pt atoms adsorbed on a hydroxylated (h) TiO₂(110)-(1 × 1) surface. Our experiments show a significant drop in the local contact potential difference (LCPD) over Pt atoms with respect to the TiO₂ surface, supporting the presence of an electron transfer from the Pt adsorbates to the substrate. We have identified two characteristic regimes by LCPD spectroscopy. At far tip-sample distances, LCPD values show a weak distance dependence and can be attributed to the intrinsic charge transfer from Pt to the oxide support. Beyond the onset of short-range chemical interactions, LCPD values exhibit a strong distance dependence that we ascribe to the local structural and charge rearrangements induced by the tip-sample interaction. These findings also apply to other electropositive adsorbates such as potassium and the hydrogen atoms forming the OH groups that are present on the h-TiO₂(110) surface, promoting KPFM as a suitable tool for the understanding of electron transfer in catalytically active materials.