[ANCA-negative granulomatosis with polyangiitis: a case report]

We reported a case of 73-year-old male with multiple pulmonary nodules and cavities. The patient was admitted with a chief complaint of "dry cough with shortness of breath for 3 months". Chest CT showed multiple irregular masses, nodules, and patchy lesions in both lungs, accompanied by the formation of cavities. He also had anemia and renal dysfunction. Despite given empirical anti-infective and anti-tuberculosis treatments, the pulmonary nodules progressed, and the cavities enlarged. Anti-neutrophil cytoplasmic antibodies (ANCA) were negative twice. Bronchoscopic biopsy was performed. The mucosal pathology of the right middle lobe lesion showed little necrosis, focal granulomatous structure formation, and relevant vasculitis and remaining vessel wall structure in the necrosis lesions by elastic fiber staining. A clinical diagnosis of ANCA-negative necrotizing granulomatous polyangiitis was made and the patient was treated with glucocorticoids and cyclophosphamide. The nodules and cavities shrank, and some lesions were absorbed.

[Preliminary measurement and analysis of the condylar movement envelope surface parameters in healthy adults]

Objective: To measure and analyze parameters of the three-dimensional (3D) model of the condylar movement envelope surface (ES) and provide a reference for the design of the temporomandibular prosthesis. Methods: Thirty-four healthy adults aged (25.4±2.8) years were recruited from the Department of Oral and Maxillofacial Surgery, Peking University School and Hospital of Stomatology as subjects. There were 9 males and 25 females, most of them were university students and others outside the university have received undergraduate education or above. Condylar movement ES were obtained using the previous method on the 3D trajectory of condyle. The simulations of condylar movement were projected according to opening movements, protrusion movements, and lateral movements respectively. The total area of the ES and the area proportions of models formed by above different mandibular movements were measured and calculated. The adults' head and maxillofacial 3D models reconstructed by cone beam CT were registered with ES in Geomagic Studio. The inner and outer poles of the condyle, the corrective sagittal axis of the ES, and the median sagittal plane (MSP) were calibrated in registration models using Geomagic Studio, and the parameters were measured as follows: the anteroposterior and medialateral diameters of the condyle, the anteroposterior diameters and the transverse diameters (anterior, middle and posterior parts) of the ES, the angles between the corrective sagittal axis of the ES and MSP (ES-MSP). Pearson correlation analysis was performed by SPSS 24.0. Results: The total area of the ES was (760±133) mm², the opening movement part accounted for (63.3±15.2)%, the protrusion movement part accounted for (14.9±9.6)%, the lateral movement part accounted for (21.8±13.3)%. Parameter measurements were as follows: mediolateral diameters of condyle was (19.8±2.3) mm; anteroposterior diameter of the ES was (21.2±3.1) mm, the transverse diameters (anterior, middle and posterior parts) of the ES were (20.6±2.4), (20.4±2.4), (22.0±2.6) mm, respectively; the transverse diameters of the ES were about 2 mm larger than that of the condyle. The angle between the corrective sagittal axis of ES and the MSP was 6.8°±6.2°. The coefficient of variation (CV) in these parameters showed: CV of the transverse diameters (anterior, middle and posterior parts) of the ES and mediolateral diameter of the condyle were 0.98, 0.99, 0.93, respectively (P<0.001). CV of aera of ES and mediolateral diameter of the condyle was 0.64 (P=0.002). CV of aera of ES and anteroposterior diameter of ES was 0.62 (P=0.004). Conclusions: The 3D envelope surface model formed by mandibular opening movements accounted for the largest proportion of the ES. The corrective sagittal axis of the ES was at an angle to the MSP, the transverse diameters (anterior, middle and posterior parts) of the ES were approximately 2 mm larger than the mediolateral diameter of the condyle, the transverse diameters (anterior, middle and posterior parts) of the ES were highly positively correlated with the mediolateral diameter of the condyle.

[Nutrition management of patients with acute exacerbation of chronic obstructive pulmonary disease hospitalized in Respiratory Intensive Care Unit]

Acute exacerbation of chronic obstructive pulmonary disease (COPD) is an important part of the course of COPD. Patients with life-threatening acute exacerbation need to be admitted to the respiratory intensive care unit (RICU) for treatment in time. Malnutrition is common in COPD patients, and nutritional risk also has a high prevalence in patients with COPD exacerbation, which is closely associated with the clinical outcome and mortality of these patients. Identifying patients with high nutritional risk and providing appropriate nutritional treatment will help to improve survival rate, shorten length of hospital stay and reduce complications. This review describes the potential mechanisms of malnutrition in patients with COPD, the nutritional risk assessment of patients with COPD exacerbation hospitalized in RICU, the selection of nutritional treatment methods and formulas, and the relevant problems of nutritional management of patients required noninvasive ventilation, hoping to provide information for the optimization of nutritional treatment strategy for acute exacerbation of COPD and the exploration of clinical research in the future.

[Significance of aspergillus fumigatus-specific IgG in the diagnosis of allergic bronchopulmonary aspergillosis]

The data of 18 patients with allergic bronchopulmonary aspergillosis (ABPA) who received aspergillus fumigatus-specific IgG detection from 2015 to 2021 in Peking University Third Hospital were retrospectively analyzed. Among them, 11 were male and 7 were female, aged 18-79 years. All patients had a history of asthma or symptoms of cough and asthma, and aspergillus fumigatus-specific IgE was positive; 16 patients had total serum IgE>500 U/ml, of which 13 patients had total serum IgE>1 000 U/ml. Among other diagnostic indicators, peripheral blood eosinophils were >0.5×10⁹/L in 16 cases; lung CT showed bronchiectasis in 15 cases; serum aspergillus fumigatus-specific IgG was positive (>120 AU/ml) in 10 cases. There was no significant difference in serum total IgE level, peripheral blood eosinophil count, and bronchiectasis ratio between positive and negative cases of aspergillus fumigatus-specific IgG (all P>0.05). In this study, the positive rate of aspergillus fumigatus-specific IgG in patients with ABPA was more than 50%, which has auxiliary value in the diagnosis of ABPA.

[Labelling, segmentation and application of neural network based on machine learning of three-dimensional intraoral anatomical features]

With the advent of the era of big data, artificial intelligence based on machine learning, especially artificial neural network has rapidly developed and applicated in the field of stomatology, owning huge potential in segmentation and labelling of three-dimensional intraoral anatomical features. Automatic segmentation, labelling and diagnosis can assist dentists and technicians to complete heavy and repeat work, change stomatology from subjective perception to objective science, and help to make diagnosis and treatment plan efficiently and accurately. This review briefly summarized related knowledge and development of machine learning and artificial neural network, its application status and existing problems in the field of segmentation and labelling of three-dimensional intraoral anatomical features, and provided an outlook of its future development.

[A survey on the application of diagnostic and evaluation tools for chronic obstructive pulmonary disease among respiratory physicians]

Objective: To investigate the current status of the application of diagnostic and assessment tools for chronic obstructive pulmonary disease(COPD) by respiratory physicians in China. Method: An on-line questionnaire was designed to address the common questions in COPD diagnosis and evaluation, and this survey was conducted through Wechat. Result: A total of 3 204 valid questionnaires were collected. 71.7% of the physicians were from tertiary hospitals. 75.4% of the physicians diagnosed COPD strictly on the basis of lung function results after inhaled bronchodilators, and this percentage was higher in tertiary hospitals than in secondary hospitals(78.71% vs. 66.92%, P<0.01). 99.3% of the physicians evaluated symptoms of dyspnea, but 26.8% of physicians did not use a scoring system(CAT or mMRC) for quantitative assessment. Although 83.8% of physicians would use the guideline-recommended comprehensive assessment(ABCD classification), only 45.1% of them chose initial therapy exactly according to the classification. In addition, 28.3% of physicians did not routinely order blood eosinophil counts and 20.1% did not inquire the history of tuberculosis. Conclusions: Although most respiratory physicians followed the guidelines in the diagnosis and evaluation of COPD, the use of assessment tools was inadequate, which should be addressed in educational programs for COPD management.

[Focus on influenza vaccination in patients with chronic obstructive pulmonary disease]

Influenza vaccination has been shown to reduce lower airway infections requiring hospitalization, and reduce mortality and exacerbation frequency in patients with chronic obstructive pulmonary disease(COPD), and therefore is recommended for all COPD patients by guidelines. However, the coverage of influenza vaccination in Chinese COPD patients is far from satisfactory. The large-scale COVID-19 vaccination may have a positive impact on the attitude towards influenza vaccines, and healthcare professionals should take active measures to improve the rate of influenza vaccination in patients with COPD.

[Effect of porous zirconia ceramics on proliferation and differentiation of osteoblasts]

OBJECTIVE

To investigate the effect of porous surface morphology of zirconia on the proliferation and differentiation of osteoblasts.

METHODS

According to different manufacturing and pore-forming methods, the zirconia specimens were divided into 4 groups, including milled sintering group (M-Ctrl), milled porous group (M-Porous), 3D printed sintering group (3D-Ctrl) and 3D printed porous group (3D-Porous). The surface micromorphology, surface roughness, contact angle and surface elements of specimens in each group were detected by scanning electron microscope (SEM), 3D laser microscope, contact angle measuring device and energy-dispersion X-ray analysis, respectively. MC3T3-E1 cells were cultured on 4 groups of zirconia discs. The cell morphology of MC3T3-E1 cells on zirconia discs was eva-luated on 1 and 7 days by SEM. The cell proliferation was detected on 1, 3 and 5 days by cell counting kit-8 (CCK-8). After osteogenic induction for 14 days, the relative mRNA expression of alkaline phosphatase (ALP), type Ⅰ collagen (Colla1), Runt-related transcription factor-2 (Runx2) and osteocalcin (OCN) in MC3T3-E1 cells were detected by real-time quantitative polymerase chain reaction.

RESULTS

The pore size [(419.72±6.99) μm] and pore depth [(560.38±8.55) μm] of 3D-Porous group were significantly larger than the pore size [(300.55±155.65) μm] and pore depth [(69.97±31.38) μm] of M-Porous group (P < 0.05). The surface of 3D-Porous group appeared with more regular round pores than that of M-Porous group. The contact angles of all the groups were less than 90°. The contact angles of 3D-Ctrl (73.83°±5.34°) and M-Porous group (72.7°±2.72°) were the largest, with no significant difference between them (P>0.05). Cells adhered inside the pores in M-Porous and 3D-Porous groups, and the proliferation activities of them were significantly higher than those of M-Ctrl and 3D-Ctrl groups after 3 and 5 days' culture (P < 0.05). After 14 days' incubation, ALP, Colla1, Runx2 and OCN mRNA expression in 3D-Porous groups were significantly lower than those of M-Ctrl and 3D-Ctrl groups (P < 0.05). Colla1, Runx2 and OCN mRNA expressions in M-Porous group were higher than those of 3D-Porous group (P < 0.05).

CONCLUSION

The porous surface morphology of zirconia can promote the proliferation and adhesion but inhibit the differentiation of MC3T3-E1 cells.

[Accuracy analysis of full-arch implant digital impressions when using a geometric feature]

Objective: To evaluate the effect of adding a geometric feature on the accuracy of digital impressions obtained by intraoral scanners for implant restoration of edentulous jaw quantitatively. Methods: A dentiform model of the maxilla of completely edentulous arch with 6 implant analogs+scan bodies (No. 1-6) was selected as the reference model. Without geometric feature, the dentiform model was scanned by dental model scanner and repeated for 5 times as true value group. Before and after adding the geometric feature, the same operator used intraoral scanner A (Trios 3) and B (Aoralscan 2) to scan the dentiform model with the same scanning path. Each type of intraoral scanner scanned 10 times and ".stl " datas were obtained. The results were imported into reverse engineering software (Geomagic Studio 2015). The linear distances of center point of upper plane between sacn body 1 to 6 was calculated, denoted as D12, D13, D14, D15 and D16. Trueness was the absolute value subtracted from the measured value of the intraoral scanner groups and true value; precision was the absolute value of pairwise subtraction of the measured values in the intraoral scanner groups.The smaller the value, the better the accuracy or precision.With or without the feature, all scan data were statistically analyzed, and the effect of adding geometric feature on the trueness and precision of the two intraoral scanners were evaluated. Results: As for intraoral scanner A, with the feature in place, significant differences were found in D14, D15, D16 for tureness(t=2.66, 2.75, 2.95, P<0.05); the trueness for D16 decreased from (101.9±47.1) μm to (49.6±30.3) μm. On the other hand, with features on the edentulous area, the precision was significantly increased in D15 and D16 (U=378.00, 672.00, P<0.05); the precision for D15 decreased from 40.8 (45.1) μm to 13.1 (17.0) μm. As for intraoral scanner B, the trueness of D12, D13 and D14 after adding geometric features was significantly better than before (t=3.02, 2.66, U=22.00, P<0.05). With feature on the edentulous area, the trueness for D13 decreased from (116.6±41.2) μm to (70.8±35.5) μm. There was no statistical significance in the trueness of D15 and D16 with or without geometric feature (P>0.05), however, the precision of D15 and D16 after adding geometric feature was significantly better than before (U=702.00, 489.00,P<0.05). The precision of D16 decreased from 112.5 (124.7) μm to 35.9 (85.8) μm. Conclusions: The use of geometric feature in edentulous space improves the trueness and precision of the different principle intraoral scanners tested.

[Application and research progress of digital virtual simulated design in dental esthetic rehabilitation]

In dental esthetic rehabilitation, patients pay great attention to the rehabilitative esthetic effect before teeth preparation, and this is also an important content of doctor-patient communication. Along with the development and combined application of intraoral scan, three-dimensional (3D) face scan, digital design, numerical control machining and 3D printing technology, digital technology is gradually applied to the virtual simulated design before irreversible operation in dental esthetic rehabilitation. Digital technology can be used in dentistry to simulate the esthetic outcome in advance, to assist communication among the dentists, patients and dental technicians, and to realize satisfactory outcome in the final restorations precisely, which, as a result, increases the clinical satisfaction. This review focuses on the application of digital virtual simulated design technology in dental esthetic rehabilitation, analyzes the current research development, deficiency and future prospects, so as to provide guidance for clinical diagnosis and treatment.

[Identification of serum peptide biomarker for ovarian cancer diagnosis by Clin-TOF-II-MS combined with magnetic beads technology]

Objective: To explore the serum cyclic polypeptide biomarkers for ovarian cancer diagnosis. Methods: A total of 54 patients with epithelial ovarian cancer confirmed by pathology in Cancer Hospital, Chinese Academy of Medical Sciences from March 2018 to September 2018 were selected as the study subjects, and 40 healthy women with normal examination results in the cancer screening center were selected as the control. All of the samples were randomly divided into training set and validation set at the ratio of 1∶1 with a random number. Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) combined with magnetic bead technology was used for detecting peptide profiling in serum samples to screen significantly differently expressed peptides between ovarian cancer group and control group of the training set (score>5). Receiver operating characteristic (ROC) curve analysis was used to screen differential peptide peaks with area under curve (AUC) ≥0.8, sensitivity and specificity>90% in the training set and validation set. Liquid chromatography-mass spectrometry (LC-MS/MS) was further used to determine the composition of differentially expressed peptides. Results: By comparing the peptide profiles of the two groups, 102 differential peptide peaks were initially detected in the mass-to-charge ratio range of 1 000 to 10 000. ROC curve analysis showed that there were 42 differential peptide peaks with AUC ≥0.8 in both training set and validation set, 19 of which were highly expressed in ovarian cancer group, and 23 were lowly expressed. There were 15 different peptide peaks in highly expressed ovarian cancer group with sensitivity and specificity over 90%. The mass-to-charge ratios were 7 744.27, 5 913.41, 5 329.87, 4 634.21, 4 202.02, 3 879.26, 3 273.35, 3 253.79, 3 234.34, 2 950.33, 2 664.51, 2 018.38, 1 893.37, 1 498.69 and 1 287.55. There were 15 different peptide peaks in lowly expressed ovarian cancer group with sensitivity and specificity over 90%, the mass-to-charge ratios were 9 288.46, 7 759.77, 5 925.24, 4 652.77, 4 210.42, 3 887.02, 3 279.90, 3 240.82, 2 962.15, 2 932.70, 2 022.42, 1 897.16, 1 501.69, 1 337.38 and 1 290.13. No protein composition was identified in 15 different peptide peaks in lowly expressed ovarian cancer group. The two protein compositions identified in 15 different peptide peaks in highly expressed ovarian cancer group were recombinant serglycin (SRGN) and fibinogen alpha chain (FGA), the mass-to-charge ratios of which were 1 498.696 and 5 913.417, respectively. The sensitivity and specificity of the two proteins for ovarian cancer diagnosis were 100%, 100% and 90.9%, 100%, respectively. Conclusion: SRGN and FGA are highly expressed in the serum of ovarian cancer patients, which may be potential diagnostic markers for ovarian cancer.

[Quantitative study of intraoral scanners' accuracy]

Objective: To establish a standard method to evaluate the scanning accuracy of intraoral scanner (IOS) and to investigate six IOS's scanning accuracy and the relationship between different scan span. Methods: Five simplified six abutments full arch model were fabricated by high accuracy (5 μm) milling machine with 7075 aluminum alloy. The machining accuracy, which was verified by a coordinate measuring machine with higher accuracy (0.7 μm), was considered as the reference accuracy. The model with the highest machining accuracy was considered as the test model in IOS's scanning accuracy test, and computer-aided design (CAD) data of the model was used as the reference data. Six IOS scanned the test model 10 times with the same scanning path, obtained 60 test data. CAD data and test data were input into Geomagic Studio 2014. The preparation part above the margin of the abutments of the data was isolated and divided into 4 segments of interest: single crown, three-unit bridge, five-unit bridge, and full arch. The test data were then best-fit aligned to CAD data or each other followed by deviation analysis. Scanning trueness and precision were then calculated. Results: The mid-value of scanning trueness and precision of six IOS in single crown, three-unit bridge, five-unit bridge and full arch were 13.3-29.6 μm and 7.6-20.7 μm, 15.4-30.9 μm and 8.7-26.5 μm, 17.0-66.1 μm and 11.3-44.2 μm, 24.0-107.9 μm and 24.6-150.1 μm respectively. Conclusions: Long-span scanning can affect the accuracy of IOS to a varying extent.

[Application and outlook of robotics in prosthetic dentistry]

At present, robotic system has been applied in many aspects of the field of prosthetic dentistry, such as tooth preparation, oral implant surgery, full denture arrangement, prosthodontic material testing and robotic education of prosthodontics. The advantages of prosthodontic robotics lie in their ability to perform quantitative and precise operations whilerepeating the work flow indefinitely, which assist dentists to complete heavy and complicated daily treatment. In the research and development of prosthodontic robotics, the limitation of oral operation space should be fully considered, and robotics should have high safety and flexibility. The review briefly summarizes the application and existing problems of robotics in prosthodontics, and provides references for further development and design.

[Research and application progress of mechanical measures for oral plaque control]

Effective removal of dental plaque is a key measure to prevent and control common oral diseases and to maintain the long-term effect of dental prostheses. The methods of oral plaque control are mainly depending on mechanical measures, including regular toothbrushing, interdental cleaning and oral irrigation. Toothbrushing is the most common and effective method for mechanical removal of dental plaque.How ever the effect of toothbrushing alone to remove dental plaque is limited. It is necessary to control the interdental plaque using tools such as dental floss and interdental brushes. Oral irrigation is an assistant method to improve oral hygiene. Toothbrushing combined with the use of oral irrigator can significantly improve the removal rate of dental plaque. The present article reviews the research progress of the mechanical plaque control methods and their application results.

[Quantitative evaluation of printing accuracy of multi-color and multi-hardness three-dimensional printing dental model with photopolymer jetting]

Objective: To quantitatively evaluate the accuracy of multi-color and multi-hardness dental models printed by using the photopolymer jetting (PJ) technology, and to provide protocol for the clinical application. Methods: A maxillary partially edentulous (Kennedy class Ⅱ subclass 1) standard digital model obtained through scanning and processing was selected as reference data. Five monochromatic DLP (digital light processing) models with single hardness were printed by printer DLP-800d based on DLP technology (DLP group), and five multi-color and multi-hardness PJ models were printed by printer J300Plus based on PJ technology (PJ group). Scan the printed model and register the scanning data to the reference data in Geomagic Studio 2013 software. The three-dimensional (3D) deviations of the whole and each area, including residual dentition, abutments adjacent to the edentulous area, gingiva, gingiva in the distal-extended edentulous area, gingiva in other edentulous areas, gingiva supporting the removable partial denture (RPD), were calculated and represented by the root mean square error (RMS) value. The smaller the RMS value was, the higher the trueness of printing was. The scanning data of the five models in the same group were registered in pairs to calculate the 3D deviation. The smaller the RMS value was, the higher the precision of printing was. The threshold of clinical acceptability was 200 μm. Statistical analysis was performed to compare the difference of trueness and precision between the two groups. Results: The overall trueness of the DLP group [57.70 (2.10) μm] was significantly better than that of the PJ group [71.00 (7.70) μm]. The overall precision of the DLP group [15.20 (5.05) μm] was significantly better than that of the PJ group [37.55 (15.55) μm]. The overall trueness and precision of both groups were within the clinically acceptable range. Conclusions: The domestic PJ printer used in this study can print multi-color and multi-hardness dental models with good trueness and precision, which can provide integrated 3D printing technology support for realizing the simulation of regional hardness differentiation between soft and hard tissues of dental models.

Materials Engineering of Violin Soundboards by Stradivari and Guarneri

We investigated the material properties of Cremonese soundboards using a wide range of spectroscopic, microscopic, and chemical techniques. We found similar types of spruce in Cremonese soundboards as in modern instruments, but Cremonese spruces exhibit unnatural elemental compositions and oxidation patterns that suggest artificial manipulation. Combining analytical data and historical information, we may deduce the minerals being added and their potential functions—borax and metal sulfates for fungal suppression, table salt for moisture control, alum for molecular crosslinking, and potash or quicklime for alkaline treatment. The overall purpose may have been wood preservation or acoustic tuning. Hemicellulose fragmentation and altered cellulose nanostructures are observed in heavily treated Stradivari specimens, which show diminished second‐harmonic generation signals. Guarneri's practice of crosslinking wood fibers via aluminum coordination may also affect mechanical and acoustic properties. Our data suggest that old masters undertook materials engineering experiments to produce soundboards with unique properties.

[Analysis of PARP inhibitors induced anemia in advanced and relapsed epithelial ovarian cancer]

Objective: To explore the clinical features of poly ADP-ribose polymerase (PARP) inhibitor-related anemia in advanced and relapsed epithelial ovarian cancer (EOC). Methods: Patients diagnosed with advanced or relapsed EOC and treated with PARP inhibitor at National Cancer Center/National Clinical Research Center for Cancer/Cancer Hospital, Chinese Academy of Medical Sciences and Peking Union Medical College between January 2015 to October 2020 were accrued. The data included PARP inhibitors, treatment details, and lab tests before treatment and during treatment were collected and the clinical characteristics of PARP inhibitor-related anemia were analyzed. Results: (1) A total of 98 patients with a median age of 56.5 years old (30-82 years old) were enrolled in this study. All patients were treated with PARP inhibitor (65 cases of olaparib, 17 cases of niraparib, and 16 cases of fluzoparib). The median treatment duration was 37.5 weeks (4-119 weeks). (2) The anemia rate was 40% (39/98), including 5% (5/98) of grade Ⅰ, 14% (14/98) of grade Ⅱ, 11% (11/98) of grade Ⅲ, and 9% (9/98) of grade Ⅳ. Fourteen patients with pre-treatment grade Ⅰ anemia had a higher rate of anemia events than the 80 patients without pre-treatment anemia, 7/14 vs 35% (28/80; χ²=4.281, P=0.039). (3) The median anemia occurrence time was 7.0 weeks (1-52 weeks), including 41% (16/39) of anemia cases occurred in 1-4 weeks, 26% (10/39) occurred in 5-8 weeks, 13% (5/39) occurred in 9-12 weeks, 3% (1/39) occurred in 13-16 weeks, 10% (4/39) occurred in 17-20 weeks, 8% (3/39) occurred ≥21 weeks. At the time of the lowest hemoglobulin tested, the median value of mean corpuscular volume (MCV) was 106 fl,which was higher than the up limit of normal range (100 fl), 74% (29/39) of anemia patients had an elevated MCV level; the median value of mean corpuscular hemoglobin (MCH) was 36 pg, 54% (21/39) of anemia patients had an elevated MCH level; the median value of mean corpuscular hemoglobin concentration (MCHC) was 320 g/L, 69% (27/39) of anemia patients had a higher MCHC level; 92% (36/39) of anemia patients had a normal level of serum iron; 79% (31/39) of anemia patients had a normal level of transferrin. 74% (29/39) of the anemia patients were macrocytic orthochromatic anemia. (4) Among the 39 patients with anemia, 20 patients (51%, 20/39) withhold the treatment of PARP inhibitor due to grade Ⅲ or Ⅳ anemia, including 10 patients (50%, 10/20) who resumed the PARP inhibitor treatment by suppling iron, folate, and vitamin B₁₂. The median stopping time of PARP inhibitor was 5.5 weeks (2-10 weeks), while the other 10 patients terminated the PARP inhibitor treatment for not recovering from severe anemia. Conclusions: One of the common adverse effects of PARP inhibitors is anemia, which mostly happened in the first 3 months of treatment. In the treatment of EOC, PARP inhibitor-related anemia mainly manifest as macrocytic orthochromatic anemia, and most patients with normal serum iron and transferrin.

[Advances in computer aided design and computer aided manufacturing of removable partial denture]

Computer aided design, numerically controlled milling, additive manufacturing and other digital technologies have been widely used in clinical practice of prosthodontics. The application of these technologies not only changed the design and manufacturing workflow of removable partial denture (RPD), but also improved the production efficiency of dentures, and changed the design and manufacturing concept of dentures. A large number of researches on computer aided design and computer aided manufacturing (CAD/CAM) of RPD have emerged in recent years, including researches on the properties of selective laser melting metal powder and other new dental materials, the innovative design of retainers, connectors, artificial teeth and other denture components, high precision manufacturing of the RPD framework, denture base and artificial teeth, quantitative laboratory evaluations of the accuracy, adaption and mechanical properties of RPD with new structures and made of new materials, clinical evaluations of RPD and others. This paper introduces these recent developments in CAD/CAM of RPD.

[Investigation of posterior teeth displacement under normal bite force by an intraoral scanner]

Objective: To quantitatively evaluate the change of the long axis angle and the relative displacement of the crown feature points of the posterior teeth under normal bite force utilizing an intraoral scanner, and to provide clinical reference. Methods: From May to December 2019, fifteen graduate volunteers (5 males and 10 females, aged from 22 to 30, with an average age of 25.7 years) from Peking University School and Hospital of Stomatology were recruited to participate in the study. The surface data (U1, L1) of the maxillary and mandibular posterior teeth were scanned by an intraoral scanner i500, and saved as original data. The volunteers were guided to bite in the intercuspal position with normal bite force. The buccal bite data of the posterior teeth were scanned as the basis for registration. The digital casts were imported into Geomagic studio 2013 software and the boundary lines along the gingival margin and mesial and distal contact area of posterior teeth of data (U1, L1) were determined. Long axis of the crown, crown centroid and mesial functional cusp vertex were establishd. The data (U1, L1) were segmented into single tooth. Single tooth was aligned to buccal bite data separately using best-fit alignment command based on the buccal common area of the crown and new casts data (U2, L2) were obtained as the data under bite force. The long axis angle and centroid distance between adjacent teeth (second premolar and first molar, second molar and first molar) were measured and the deviation between data obtained at mouth-open state and that at biting state was calculated. Negative value meant centroid distance became shorter under bite force. The first molar was set as the common area and registrate the U1, L1 to U2, L2. The angle of long axes, and displacement of centroid and of functional cusp vertex between second premolar of two casts were calculated, as well as between second molar of two casts. Wilcoxon signed rank test was used to analyze the differences of teeth displacement between second premolar and second molar, and between maxillary and mandibular jaws with SPSS 26.0 statistical software. Results: The result of second premolar and second molar in the same jaw had no statistical difference (P>0.05). The centroid distance deviation of mandibular second premolar-first molar [-0.022(0.046) mm] was larger than that of maxilla [-0.006 (0.040) mm] (P<0.05). The long axis angle of second premolar itself [0.913°(0.647°)] and centroid distance of second molar itself [0.102 (0.106) mm] on the mandibular jaw were different from that on the maxillary jaw, which were 0.590°(0.550°) and 0.074(0.060) mm respectively (P<0.05). Conclusions: Under bite force, displacement of the second premolar and second molar was present, including the displacement of centroids and deflection of long axes. The mandibular posterior teeth have larger displacement than the maxillary teeth.

Biodistribution of Graphene Oxide Determined through Postadministration Labeling with DNA-Conjugated Gold Nanoparticles and ICPMS

Recent research has revealed the use of graphene oxide (GO) and its derivatives as a potential biomaterial because of their attractive physicochemical characteristics and functional properties. However, if GO and related derivatives are to become useful materials for biomedical applications, it will be necessary to evaluate their biodistribution for health and safety considerations. To obtain a more accurate biodistribution for GO, we (i) developed a postadministration labeling strategy employing DNA-conjugated gold nanoparticles (DNA-AuNPs) to selectively label administered GO in Solvable-treated tissue samples and (ii) constructed an automatic sample pretreatment scheme (using a C₁₈-packed minicolumn) to effectively separate the DNA-AuNP-labeled GO from the unbound DNA-AuNPs and the dissolved tissue matrices, thereby enabling ultrasensitive, interference-free quantification of GO through measurement (inductively coupled plasma mass spectrometry) of the Au signal intensities. The DNA-AuNPs can bind to GO in a concentration- and time-dependent manner. After optimizing the labeling conditions (DNA length, incubation pH, DNA-AuNP concentration, and incubation time) and the separation scheme (sample loading flow rate, rinsing volume, and eluent composition), we found that A₂₀R₂₀-AuNPs (R₂₀: random DNA sequence including A, T, C, and G) had the strongest binding affinity for labeling of the administered GO (dissociation constant: 36.0 fM) and that the method's detection limit reached 9.3 ag L^-1 with a calibration curve having a working range from 10^-1 to 10¹⁰ fg L^-1. Moreover, this approach revealed that the intravenously administered GO accumulated predominantly in the liver and spleen at 1 and 12 h post administration, with apparent discrepancies in the concentrations measured using pre- and postadministration labeling strategies.

NIR-cleavable drug adducts of gold nanostars for overcoming multidrug-resistant tumors

An aptamer-conjugated gold nanostar (dsDDA-AuNS) has been developed for targeting nucleolin present in both tumor cells and tumor vasculature for conducting a drug-resistant cancer therapy. AuNS with its strong absorption in the near-infrared (NIR) region was assembled with a layer of the anti-nucleolin aptamer AS1411. An anticancer drug, namely doxorubicin (DOX), was specifically conjugated on deoxyguanosine residues employing heat and acid labile methylene linkages. In response to NIR irradiation, dsDDA-AuNS allowed on-demand therapeutics. AS1411 played an active role in drug cargo-nucleus interactions, enhancing drug accumulation in the nuclei of drug-resistant breast cancer cells. The intravenous injection of dsDDA-AuNS allowed higher drug accumulation in drug-resistant tumors over naked drugs, leading to greater therapeutic efficacy even at a 54-fold less equivalent drug dose. The in vivo triggered release of DOX from dsDDA-AuNS was achieved by NIR irradiation, resulting in simultaneous photothermal and chemotherapeutic actions, yielding superior tumor growth inhibition than those obtained from either type of monotherapy for overcoming drug resistance in cancers.

Dietary Intake and Residues of Organochlorine Pesticides in Foods from Hsinchu, Taiwan

The levels of contamination with various organochlorine pesticides (such as total HCH, heptachlor, heptachlor epoxide, aldrin, dieldrin, endrin, endosulfan, and total DDT) of different foods from 3 traditional markets were determined to estimate Taiwanese daily intake of organochlorine pesticides. Of the 18 organochlorine pesticides investigated, α-HCH, β-HCH, lindane, δ-HCH, heptachlor, heptachlor epoxide, dieldrin, endrin, α-endosulfan, p,p′-DDE, and p,p′-DDT were detected at concentrations ranging from 0.26 to 10.2 ng/g wet weight. Contamination with organochlorine pesticides followed the order heptachlor &gt; dieldrin &gt; α-endosulfan &gt; HCH isomers &gt; heptachlor epoxide &gt; DDT. Frequencies of detection of organochlorine pesticide residues ranged from 2.0 to 52.3%. α-Endosulfan was the most frequently detected organochlorine pesticide in the foods analyzed, followed by heptachlor epoxide (47.6%) and α-HCH (38.9%). Estimated daily intakes (EDIs) of organochlorine pesticides from foods were 1.137 μg for total HCH, 2.147 μg for heptachlor, 0.702 μg for heptachlor epoxide, 0.624 μg for endosulfan, 0.098 μg for cyclodiene, and 0.541 μg for total DDT. These EDIs were only 0.075% of the acceptable daily intake (ADI) for lindane, 47.5% of ADI for heptachlor and heptachlor epoxide, 0.045% of ADI for total DDT, and 1.01% of ADI for aldrin and dieldrin. Therefore, consumption of the foods analyzed does not pose a risk to consumer health.