Graphene-Molecule Hybridization at a Ferromagnetic Interface

The introduction of a graphene (Gr) buffer layer between a ferromagnetic substrate and a metallorganic molecule is known to mediate the magnetic coupling between them, an effect attributed to a weak hybridization between graphene and molecule. In this paper, we present experimental evidence of this effect through a detailed investigation of the frontier electronic properties of iron phthalocyanine deposited on cobalt-supported graphene. Despite being physisorbed, the molecular adsorption on Gr/Co induces a sizeable charge transfer from graphene to the molecular macrocycle leading to the partial occupation of the LUMO and the appearance of an energetically localized hybrid state, which can be attributed to the overlap between the graphene pz state and the molecular macrocycle. Graphene is not inert either; the adsorption of the molecule induces doping and alters the Fermi velocity of both the hybrid minicone state and the Dirac cone. Similar effects are observed when the molecular periphery is decorated with fluorine atoms, known for their electron-withdrawing properties, with minimal changes in the energy alignment.

Interface Design beyond Epitaxy: Oxide Heterostructures Comprising Symmetry-Forbidden Interfaces

Epitaxial growth of thin-film heterostructures is generally considered the most successful procedure to obtain interfaces of excellent structural and electronic quality between 3D materials. However, these interfaces can only join material systems with crystal lattices of matching symmetries and lattice constants. This article presents a novel category of interfaces, the fabrication of which is membrane-based and does not require epitaxial growth. These interfaces therefore overcome the limitations imposed by epitaxy. Leveraging the additional degrees of freedom gained, atomically clean interfaces are demonstrated between threefold symmetric sapphire and fourfold symmetric SrTiO3. Atomic-resolution imaging reveals structurally well-defined interfaces with a novel moiré-type reconstruction.

Mask interfaces and devices for home noninvasive ventilation in children

Home noninvasive ventilation (NIV), including continuous (CPAP) and bilevel (BPAP) positive airway pressure, is increasingly used in children worldwide. In this narrative review, we present a comprehensive summary of the equipment available for home NIV in pediatrics, excluding neonates. NIV may be challenging in young children, as the majority of the equipment has been developed for adults. Regarding the interfaces, only a few masks have been specifically developed for young children in recent years, while older children may benefit from a large variety of interfaces. Even though much progress has been made, skin injuries are still present, and need to be managed rapidly. Several studies addressed the management of the side effects, but recent studies are lacking regarding orofacial anomalies. No recent study reported the available interfaces for young children and the strategies for an optimal mask fit. Regarding the devices, an adapted NIV device to pediatrics that allows an adequate patient's breathing detection should guarantee optimal ventilatory efficiency and monitoring of NIV. A close follow-up and regular monitoring should be mandatory to rule out the potential issues, optimize NIV therapy and ascertain the efficacy of NIV. However, studies are lacking to guide the choice of devices in young children and the optimal management of home NIV in pediatrics. We summarized the characteristics of the different interfaces available for young children and the limitations of NIV devices. We finally addressed potential areas for future research on long-term home NIV in children.

Accelerating the Development of LLZO in Solid-State Batteries Toward Commercialization: A Comprehensive Review

Solid-state batteries (SSBs) are under development as high-priority technologies for safe and energy-dense next-generation electrochemical energy storage systems operating over a wide temperature range. Solid-state electrolytes (SSEs) exhibit high thermal stability and, in some cases, the ability to prevent dendrite growth through a physical barrier, and compatibility with the "holy grail" metallic lithium. These unique advantages of SSEs have spurred significant research interests during the last decade. Garnet-type SSEs, that is, Li7La3Zr2O12 (LLZO), are intensively investigated due to their high Li-ion conductivity and exceptional chemical and electrochemical stability against lithium metal anodes. However, poor interfacial contact with cathode materials, undesirable lithium plating along grain boundaries, and moisture-induced chemical degradation greatly hinder the practical implementation of LLZO-based SSEs for SSBs. In this review, the recent advances in synthesis methods, modification strategies, corresponding mechanisms, and applications of garnet-based SSEs in SSBs are critically summarized. Furthermore, a comprehensive evaluation of the challenges and development trends of LLZO-based electrolytes in practical applications is presented to accelerate their development for high-performance SSBs.

Boron Nitride/Carbon Fiber High-Oriented Thermal Conductivity Material with Leaves-Branches Structure

In the realm of thermal interface materials (TIMs), high thermal conductivity and low density are key for effective thermal management and are particularly vital due to the growing compactness and lightweight nature of electronic devices. Efficient directional arrangement is a key control strategy to significantly improve thermal conductivity and comprehensive properties of thermal interface materials. In the present work, drawing inspiration from natural leaf and branch structures, a simple-to-implement approach for fabricating oriented thermal conductivity composites is introduced. Utilizing carbon fibers (CFs), known for their ultra-high thermal conductivity, as branches, this design ensures robust thermal conduction channels. Concurrently, boron nitride (BN) platelets, characterized by their substantial in-plane thermal conductivity, act as leaves. These components not only support the branches but also serve as junctions in the thermal conduction network. Remarkably, the composite achieves a thermal conductivity of 11.08 W/(m·K) with just an 11.1 wt% CF content and a 1.86 g/cm3 density. This study expands the methodologies for achieving highly oriented configurations of fibrous and flake materials, which provides a new design idea for preparing high-thermal conductivity and low-density thermal interface materials.

Fabrication and Functional Regulation of Biomimetic Interfaces and Their Antifouling and Antibacterial Applications: A Review

Biomimetic synthesis provides potential guidance for the synthesis of bio-nanomaterials by mimicking the structure, properties and functions of natural materials. Behavioral studies of biological surfaces with specific micro/nano structures are performed to explore the interactions of various molecules or organisms with biological surfaces. These explorations provide valuable inspiration for the development of biomimetic surfaces with similar effects. This work reviews some conventional preparation methods and functional modulation strategies for biomimetic interfaces. It aims to elucidate the important role of biomimetic interfaces with antifouling and low-pollution properties that can replace non-environmentally friendly coatings. Thus, biomimetic antifouling interfaces can be better applied in the field of marine antifouling and antimicrobial. In this review, the commonly used fabrication methods for biomimetic interfaces as well as some practical strategies for functional modulation is present in detail. These methods and strategies modify the physical structure and chemical properties of the biomimetic interfaces, thus improving the wettability, adsorption, drag reduction, etc. that they exhibit. In addition, practical applications are presented of various biomimetic interfaces for antifouling and look ahead to potential biomedical applications. By continuously discovering functional surfaces with biomimetic properties and studying their microstructure and macroscopic properties, more biomimetic interfaces will be developed.

Photonics in Multimaterial Lateral Heterostructures Combining Group IV Chalcogenide van der Waals Semiconductors

Lateral heterostructures combining two multilayer group IV chalcogenide van der Waals semiconductors have attracted interest for optoelectronics, twistronics, and valleytronics, owing to their structural anisotropy, bulk-like electronic properties, enhanced optical thickness, and vertical interfaces enabling in-plane charge manipulation/separation, perpendicular to the trajectory of incident light. Group IV monochalcogenides support propagating photonic waveguide modes, but their interference gives rise to complex light emission patterns throughout the visible/near-infrared range both in uniform flakes and single-interface lateral heterostructures. Here, this work demonstrates the judicious integration of pure and alloyed monochalcogenide crystals into multimaterial heterostructures with unique photonic properties, notably the ability to select photonic modes with targeted discrete energies through geometric factors rather than band engineering. SnS-GeS1-xSex-GeSe-GeS1-xSex heterostructures with a GeS1-xSex active layer sandwiched laterally between GeSe and SnS, semiconductors with similar optical constants but smaller bandgaps, were designed and realized via sequential vapor transport synthesis. Raman spectroscopy, electron microscopy/diffraction, and energy-dispersive X-ray spectroscopy confirm a high crystal quality of the laterally stitched components with sharp interfaces. Nanometer-scale cathodoluminescence spectroscopy provides evidence for a facile transfer of electron-hole pairs across the lateral interfaces and demonstrates the selection of photon emission at discrete energies in the laterally embedded active (GeS1- xSex) part of the heterostructure.

The Role of the Molecular Encapsulation Effect in Stabilizing Hydrogen-Bond-Rich Gel-State Lithium Metal Batteries

Gel-state polymer electrolytes with superior mechanical properties, self-healing abilities and high Li+ transference numbers can be obtained by in situ polymerization of monomers with hydrogen-bonding moieties. However, it is overlooked that the active hydrogen atoms in hydrogen-bond donors experience displacement reactions with lithium metal in lithium metal batteries (LMBs), leading to corrosion of the lithium metal. Herein, it is discovered that the addition of hydrogen-bond acceptors to hydrogen-bond-rich gel-state electrolytes modulates the chemical activity of the active hydrogen atoms via the formation of hydrogen-bonded intermolecular interactions. The characterizations reveal that the added hydrogen-bond acceptors encapsulate the active hydrogen atoms to suppress the interfacial chemical corrosions of lithium metals, thereby enhancing the chemical stability of the polymer structure and interphase. With the employment of this strategy, a 1.1 Ah LiNi0.8Co0.1Mn0.1O2/Li metal pouch cell achieves stable cycling with 96.3 % capacity retention at 100 cycles. This new approach indicates a feasible path for achieving in situ polymerization of highly stable gel-state-based LMBs.

A High-Rate and Long-Life Sodium Metal Battery Based on a NaB3H8 ⋅ xNH3@NaB3H8 Composite Solid-State Electrolyte

All-solid-state sodium metal batteries are promising for large-scale energy storage applications owing to their intrinsic safety and cost-effectiveness. However, they generally suffer from sodium dendrite growth or rapid capacity fading, especially at high rates, mainly due to poor wettability, sluggish ionic transport, or low interfacial stability of the solid electrolytes. Herein, we report a novel composite, NaB3H8 ⋅ xNH3@NaB3H8 (x<1), as a new class of solid electrolyte for high-rate batteries. NaB3H8 ⋅ xNH3@NaB3H8 is obtained from the sticky NaB3H8 ⋅ NH3 after removal of NH3 partially at room temperature. It delivers an ionic conductivity of 0.84 mS cm-1 at 25 °C and reaches 20.64 mS cm-1 at 45 °C after an order-disorder phase transformation. It also reveals a good capability of dendrite suppression and remarkable stability against sodium metal. These performances enable the all-solid-state Na//TiS2 battery with a high capacity of 232.4 mAh g-1 (97.2 % of theoretical capacity) and long-term cycling stability at 1 C. Notably, this battery shows superior long-life cycling stability even at 5 and 10 C, which has been rarely reported in all-solid-state sodium metal batteries. This work opens a new group of solid electrolytes, contributing to fast-charging or high-power-density sodium metal batteries.

The Impact of Local Strain Fields in Noncollinear Antiferromagnetic Films

Antiferromagnets hosting structural or magnetic order that breaks time reversal symmetry are of increasing interest for "beyond von Neumann" computing applications because the topology of their band structure allows for intrinsic physical properties, exploitable in integrated memory and logic function. One such group are the noncollinear antiferromagnets. Essential for domain manipulation is the existence of small net moments found routinely when the material is synthesized in thin film form and attributed to symmetry breaking caused by spin canting, either from the Dzyaloshinskii-Moriya interaction or from strain. Although the spin arrangement of these materials makes them highly sensitive to strain, there is little understanding about the influence of local strain fields caused by lattice defects on global properties, such as magnetization and anomalous Hall effect. This premise is investigated by examining noncollinear antiferromagnetic films that are either highly lattice mismatched or closely matched to their substrate. In either case, edge dislocation networks are generated and for the former case, these extend throughout the entire film thickness, creating large local strain fields. These strain fields allow for finite intrinsic magnetization in seemingly structurally relaxed films and influence the antiferromagnetic domain state and the intrinsic anomalous Hall effect.

Improved Energy Storage Performance of Composite Films Based on Linear/Ferroelectric Polarization Characteristics

The development and integration of high-performance electronic devices are critical in advancing energy storage with dielectric capacitors. Poly(vinylidene fluoride-trifluoroethylene-chlorofluoroethylene) (PVTC), as an energy storage polymer, exhibits high-intensity polarization in low electric strength fields. However, a hysteresis effect can result in significant residual polarization, leading to a severe energy loss, which impacts the resultant energy storage density and charge/discharge efficiency. In order to modify the polarization properties of the polymer, a biaxially oriented polypropylene (BOPP) film with linear characteristics has been selected as an insulating layer and combined with the PVTC ferroelectric polarization layer to construct PVTC/BOPP bilayer films. The hetero-structure and polarization characteristics of the bilayer film have been systematically studied. Adjusting the BOPP volume content to 67% resulted in a discharge energy density of 10.1 J/cm3 and an energy storage efficiency of 80.9%. The results of this study have established the mechanism for a composite structure regulation of macroscopic energy storage performance. These findings can provide a basis for the effective application of ferroelectric polymer-based composites in dielectric energy storage.

Unlocking the surface chemistry of ionic minerals: a high-throughput pipeline for modeling realistic interfaces

A systematic procedure is introduced for modeling charge-neutral non-polar surfaces of ionic minerals containing polyatomic anions. By integrating distance- and charge-based clustering to identify chemical species within the mineral bulk, our pipeline, PolyCleaver, renders a variety of theoretically viable surface terminations. As a demonstrative example, this approach was applied to forsterite (Mg2SiO4), unveiling a rich interface landscape based on interactions with formaldehyde, a relevant multifaceted molecule, and more particularly in prebiotic chemistry. This high-throughput method, going beyond techniques traditionally applied in the modeling of minerals, offers new insights into the potential catalytic properties of diverse surfaces, enabling a broader exploration of synthetic pathways in complex mineral systems.

Gradient Functional Layer Anode for Carbonate-Superstructured Solid Fuel Cells with Ethane Fuel

Carbonate-superstructured solid fuel cells (CSSFCs) are an emerging type of fuel cells with high flexibility of fuels. However, using ethane fuel for solid fuel cells is a great challenge due to serious degradation of their anodes. Herein, this critical issue is solved by creating a novel gradient functional layer anode for CSSFCs. First, a finer-scale anode with a larger surface area is demonstrated to provide more active sites for the internal reforming reaction of ethane, achieving a 60% higher ethane conversion rate and 40% lower polarization resistance than conventional anodes. Second, incorporating a gradient functional layer into the anode results in an additional 50% enhancement in the peak power density of CSSFCs to a record high value (up to 241 mW cm-2) with dry ethane fuel at a low temperature of 550 °C, which is even comparable to the power density of conventional solid oxide fuel cells above 700 °C. Furthermore, the CSSFC with the gradient anode exhibits excellent durability for over 200 h. This finding provides a new strategy to develop efficient anodes for hydrocarbon fuels.

A Stable Matrix Assisting Highly Compatible and Maintainable Lithium-Garnet Interface for Solid-State Batteries

Solid-state Li metal batteries (SSLMBs) are attractive due to their capability to simultaneously offer high energy density and high-level safety when combining Li metal anodes, solid-state electrolytes (SSEs), and high-voltage cathodes together. However, SSLMBs may well incur short circuits caused by Li dendrites penetrations, which mainly originate from the instability and poor contact between Li metal and SSEs. Herein, by taking full advantage of the reaction products of Li and Li1.3Al0.3Ti1.7(PO4)3 (LATP), a lithium-LATP composite anode (Li-LATP) is obtained, in which a stable matrix is formed to enhance the contact between Li and the garnet-type SSEs, alleviating the volume change and preserving an intact interface during the charge/discharge process. Consequently, the Li-LATP/garnet/Li-LATP symmetric cell displays a fairly low interfacial resistance of 6 Ω cm2 and stable cycling performance for over 2500 h with a low overpotential. Furthermore, the LiCoO2/garnet/Li-LATP full cell also shows a high discharge capacity of 159 mAh g-1 and great cycling performance.

Excited States Dynamics at Pentacene/Perfluoropentacene Interfaces: A Femtosecond Time-Resolved Second Harmonic Generation Study

Understanding the dynamics of excited states after optical excitation at donor-acceptor (D/A) interfaces is of paramount importance for improving the efficiency and performance of optoelectronic devices. Here, we studied the ultrafast excited state dynamics after optical excitation at interfaces between the electron donor (D) pentacene (PEN) and the electron acceptor (A) perfuoropentacene (PFP) as well as within the single compounds (PEN and PFP) using femtosecond (fs) time-resolved second harmonic generation (SHG). In the single compounds singlet fission is observed on a time scale of around 200 fs. In the bilayer systems a huge SHG intensity rise is observed due to the creation of charge transfer states at the interface and accordingly to formation of a local electric field within tens of picoseconds. The local electric field and therefore the SHG signal intensity from the interface of PEN/PFP bilayer is much more intense compared to the PFP/PEN system because the PFP and PEN intermixing at the PEN/PFP interface is higher. Accordingly a population of defect states on a time scale of 55±12 ps has been proposed for PEN/PFP. Our study provides important insights into D/A charge transfer properties, which is needed for the understanding of the interfacial photophysics of pentacene-based organic compounds.

Unraveling Exchange Coupling in Ferrites Nano-Heterostructures

The magnetic coupling of a set of SrFe12 O19 /CoFe2 O4 nanocomposites is investigated. Advanced electron microscopy evidences the structural coherence and texture at the interfaces of the nanostructures. The fraction of the lower anisotropy phase (CoFe2 O4 ) is tuned to assess the limits that define magnetically exchange-coupled interfaces by performing magnetic remanence, first-order reversal curves (FORCs), and relaxation measurements. By combining these magnetometry techniques and the structural and morphological information from X-ray diffraction, electron microscopy, and Mössbauer spectrometry, the exchange intergranular interaction is evidenced, and the critical thickness within which coupled interfaces have a uniform reversal unraveled.

Potassium Decahydrido-closo-Decaborane Urea Complex as a Potential Solid-State Electrolyte for Potassium Metal Batteries

All-solid-state potassium metal batteries have been considered promising candidates for large-scale energy storage because of abundance and wide availability of K resources, elimination of flammable liquid organic electrolytes, and incorporation of high-capacity K metal anode. However, unideal K-ion conductivities of most reported K-ion solid electrolytes have restricted the development of these batteries. Herein, a novel K2B10H10·CO(NH2)2 complex is reported, forming by incorporating urea into K2B10H10, to achieve an enhanced K-ion conductivity. The crystal structure of K2B10H10·CO(NH2)2 was determined as a monoclinic lattice with the space group of C2/c (No. 15). K2B10H10·CO(NH2)2 delivers an ionic conductivity of 2.7 × 10-8 S cm-1 at 25 °C, and reaching 1.3 × 10-4 S cm-1 at 80 °C, which is about 4 orders of magnitude higher than that of K2B10H10. One possible reason is the anion expansion in size due to the presence of dihydrogen bonds in K2B10H10·CO(NH2)2, resulting in an increase in the K-H bond distance and the electrostatic potential, thereby enhancing the mobility of K+. The K-ion conductivity is also higher than those of most hydridoborate-based K-ion conductors reported. Besides, K2B10H10·CO(NH2)2 reveals a wide electrochemical stability window and remarkable interface compatibility with K metal electrodes, suggesting a promising electrolyte for all-solid-state K metal batteries.

Silver Nanowire-Based Transparent Electrodes for V2O5 Thin Films with Electrochromic Properties

The development of electrochromic systems, known for the modulation of their optical properties under an applied voltage, depends on the replacement of the state-of-the-art ITO (In2O3:Sn) transparent electrode (TE) as well as the improvement of electrochromic films. This study presents an innovative ITO-free electrochromic film architecture utilizing oxide-coated silver nanowire (AgNW) networks as a TE and V2O5 as an electrochromic oxide layer. The TE was prepared by simple spray deposition of AgNWs that allowed for tuning different densities of the network and hence the resistance and transparency of the film. The conformal oxide coating (SnO2 or ZnO) on AgNWs was deposited by atmospheric-pressure spatial atomic layer deposition, an open-air fast and scalable process yielding a highly stable electrode. V2O5 thin films were then deposited by radio frequency magnetron sputtering on the AgNW-based TE. Independent of the oxide's nature, a 20 nm protective layer thickness was insufficient to prevent the deterioration of the AgNW network during V2O5 deposition. On the contrary, crystalline V2O5 films were grown on 30 nm thick ZnO or SnO2-coated AgNWs, exhibiting a typical orange color. Electrochromic characterization demonstrated that only V2O5 films deposited on 30 nm thick SnO2-coated AgNW showed characteristic oxidation-reduction peaks in the Li+-based liquid electrolyte associated with a reversible orange-to-blue color switch for at least 500 cycles. The electrochromic key properties of AgNW/SnO2 (30 nm)/V2O5 films are discussed in terms of structural and morphological changes due to the AgNW network and the nature and thickness of the two protective oxide coatings.

Graphene Fermi Level-Guided Attachment of Single Exoelectrogens and Induced Interfacial Doping

Graphene's exceptional electronic and mechanical properties make it a promising material for bioelectronic applications; however, understanding its interaction with electrogenic bacteria is crucial to harness its full potential. This study investigates the interface between electrogenic bacteria and graphene with Raman spectroscopy by analyzing the distinctive spectral fingerprints to understand electron energy and distribution via this non-destructive and label-free method. We find that the presence of bacteria induces a distinct red-shift in the G peak positions of graphene, indicating electron doping. Correspondingly, the bacteria demonstrate a predilection for attachment on hole-rich sites on the graphene sheet, evidenced by the comparative analysis of pre- and post-spatial Raman mapping, revealing their consistent presence within the hole-doped 2D peak position range of 2673.89-2675.43 cm-1. This affinity of bacteria is due to the overall higher Fermi level (∼4.9 ± 0.2 eV) of these regions, which favors electron transfer. These findings demonstrate the potential of leveraging the graphene's electronic properties in engineering graphene-based biosensors. Tuning graphene's charge carrier concentration would enable the promotion or prevention of bacterial attachment, facilitating capture of specific bacteria or development of antimicrobial surfaces. This approach enables clean, efficient, and accurate study of graphene-based bacterial systems, driving significant advancements and enhancing their performance.

Neural repair and regeneration interfaces: a comprehensive review

Neural interfaces play a pivotal role in neuromodulation, as they enable precise intervention into aberrant neural activity and facilitate recovery from neural injuries and resultant functional impairments by modulating local immune responses and neural circuits. This review outlines the development and applications of these interfaces and highlights the advantages of employing neural interfaces for neural stimulation and repair, including accurate targeting of specific neural populations, real-time monitoring and control of neural activity, reduced invasiveness, and personalized treatment strategies. Ongoing research aims to enhance the biocompatibility, stability, and functionality of these interfaces, ultimately augmenting their therapeutic potential for various neurological disorders. The review focuses on electrophysiological and optophysiology neural interfaces, discussing functionalization and power supply approaches. By summarizing the techniques, materials, and methods employed in this field, this review aims to provide a comprehensive understanding of the potential applications and future directions for neural repair and regeneration devices.

Triboelectric Nanogenerators Based on Fluid Medium: From Fundamental Mechanisms toward Multifunctional Applications

Fluid-based triboelectric nanogenerators (FB-TENGs) are at the forefront of promising energy technologies, demonstrating the ability to generate electricity through the dynamic interaction between two dissimilar materials, wherein at least one is a fluidic medium (such as gas or liquid). By capitalizing on the dynamic and continuous properties of fluids and their interface interactions, FB-TENGs exhibit a larger effective contact area and a longer-lasting triboelectric effect in comparison to their solid-based counterparts, thereby affording longer-term energy harvesting and higher-precision self-powered sensors in harsh conditions. In this review, various fluid-based mechanical energy harvesters, including liquid-solid, gas-solid, liquid-liquid, and gas-liquid TENGs, have been systematically summarized. Their working mechanism, optimization strategies, respective advantages and applications, theoretical and simulation analysis, as well as the existing challenges, have also been comprehensively discussed, which provide prospective directions for device design and mechanism understanding of FB-TENGs.

Aquatic Functional Liquid Crystals: Design, Functionalization, and Molecular Simulation

Aquatic functional liquid crystals, which are ordered molecular assemblies that work in water environment, are described in this review. Aquatic functional liquid crystals are liquid-crystalline (LC) materials interacting water molecules or aquatic environment. They include aquatic lyotropic liquid crystals and LC based materials that have aquatic interfaces, for example, nanoporous water treatment membranes that are solids preserving LC order. They can remove ions and viruses with nano- and subnano-porous structures. Columnar, smectic, bicontinuous LC structures are used for fabrication of these 1D, 2D, 3D materials. Design and functionalization of aquatic LC sensors based on aqueous/LC interfaces are also described. The ordering transitions of liquid crystals induced by molecular recognition at the aqueous interfaces provide distinct optical responses. Molecular orientation and dynamic behavior of these aquatic functional LC materials are studied by molecular dynamics simulations. The molecular interactions of LC materials and water are key of these investigations. New insights into aquatic functional LC materials contribute to the fields of environment, healthcare, and biotechnology.

Hydrolysis of Solid Buffer Enables High-Performance Aqueous Zinc Ion Battery

Aqueous zinc (Zn) ion batteries (AZIBs) have not yet fulfilled their talent of high safety and low cost since the anode/electrolyte interface (AEI) has long been impeded by hydrogen evolution, surface corrosion, dendritic growth, and by-product accumulation. Here, the hydrolysis of solid buffers is elaborately proposed to comprehensively and enduringly handle these issues. Take 2D layered black phosphorus (BP) as a hydrolytic subject. It is reported that the phosphoric acid generated by hydrolysis in an aqueous electrolyte produces a zinc phosphate (ZPO) rich solid electrolyte interphase (SEI) layer, which largely inhibits the dendrite growth, surface corrosion, and hydrogen evolution. Meanwhile, the hydrolytic phosphoric acid stabilizes the pH value near AEI, avoiding the accumulation of alkaline by-products. Notably, compared with the disposable ZPO engineerings of anodic SEI pre-construction and electrolyte additive, the hydrolysis strategy of BP can realize a dramatically prolonged protective effect. As a result, these multiple merits endow BP modified separator to achieve improved stripping/plating stability toward Zn anode with more than ten times lifespan enhancement in Zn||Zn symmetrical cell. More encouragingly, when coupled with a V2 O5 ·nH2 O cathode with ultra-high loadings (34.1 and 28.7 mg cm-2 ), the cumulative capacities are remarkably promoted for both coin and pouch cells.

Manipulating Cis-Trans Copolymer Chain Conformation to Simultaneously Improve Permittivity and DC Breakdown Strength in Polythiourea

Polythioureas (PTUs) show great potentials for applications in the new generation of film capacitors due to their excellent dielectric properties. Herein, the cis-trans copolymer chain of PTU is successfully tailored by employing cis and trans cyclohexyl spacers. The relationship between the copolymer chain conformation, microstructure, and dielectric properties is carefully explored by a series of analysis. Compared with cis conformation, the trans with less steric hindrance can promote the formation of H-bonds. The enhanced H-bonding interactions not only reduce the molecular inter-chain spacing, but also drive the self-assembly of molecular chains to form cylindrical and droplet nano-morphologies. The phase separation between cis and trans PTUs is confirmed by combining the experimental results of TEM and DSC, and the CT64-PTU with the most two-phase interface thus obtains the highest permittivity of 5.5 (@10 Hz). The reduced molecular inter-chain spacing is accompanied by a decreased hopping distance of charges, which improves breakdown strength by 17% from 498 MV/m to 580 MV/m. Therefore, the cis-trans copolymer chain conformation in PTU provides a simultaneous high permittivity and breakdown strength. This research offers a strategy to further design high-performance dielectrics via regulation of copolymer chain conformation.