A comprehensive bench-to-bed look into the application of gamma-sterilized 3D-printed polycaprolactone/hydroxyapatite implants for craniomaxillofacial defects, an in vitro, in vivo, and clinical study

This study investigates the safety and efficacy of 3D-printed polycaprolactone/hydroxyapatite (PCL/HA) scaffolds for patient-specific cranioplasty surgeries, employing liquid deposition modeling (LDM) technology. This research is pioneering as it explores the impact of gamma radiation on PCL/HA scaffolds and utilizes printing ink with the highest content of HA known in the composite. The mechanical, morphological, and macromolecular stability of the gamma-sterilized scaffolds were verified before implantation. Subsequent research involving animal subjects was conducted to explore the effects of sterilized implants. Eventually, three clinical cases were selected for the implantation studies as part of a phase 1 non-randomized open-label clinical trial. It was shown that a 25 kGy gamma-ray dose for sterilizing the printed implants did not alter the required geometrical precision of the printed implants. The implants exhibited well-distributed HA and strength comparable to cancellous bone. Gamma radiation reduced hydrophobicity and water uptake capacity without inducing pyrogenic or inflammatory responses. Personalized PCL/HA substitutes successfully treated various craniomaxillofacial defects, including trauma-induced facial asymmetry and congenital deformities. HA nanoparticles in the ink stimulated significant osteoconductive responses within three months of implantation. Moreover, the results revealed that while larger implants may exhibit a slower bone formation response in comparison to smaller implants, they generally had an acceptable rate and volume of bone formation. This clinical trial suggests the application of a sterilized PCL/HA composite for craniomaxillofacial surgery is safe and could be considered as a substitute for autologous bone.

Application and Perspectives: Magnesium Materials in Bone Regeneration

The field of bone regeneration has always been a hot and difficult research area, and there is no perfect strategy at present. As a new type of biodegradable material, magnesium alloys have excellent mechanical properties and bone promoting ability. Compared with other inert metals, magnesium alloys have significant advantages and broad application prospects in the field of bone regeneration. By searching the official Web sites and databases of various funds, this paper summarizes the research status of magnesium composites in the field of bone regeneration and introduces the latest scientific research achievements and clinical transformations of scholars in various countries and regions, such as improving the corrosion resistance of magnesium alloys by adding coatings. Finally, this paper points out the current problems and challenges, aiming to provide ideas and help for the development of new strategies for the treatment of bone defects and fractures.

Maxillary sinus floor augmentation with autogenous bone graft compared with composite grafts: A one-year single-blinded randomized controlled trial

OBJECTIVE

The objective was to assess the one year implant treatment outcome and patient-related outcome measures (PROMs) following maxillary sinus floor augmentation (MSFA) with autogenous bone graft (ABG) from the zygomatic buttress (control) compared with 1:1 mixture of ABG and anorganic porcine bone mineral (APBM) (Test I) or biphasic bone graft material (BBGM) (Test II).

MATERIALS AND METHODS

Sixty healthy patients (34 females, 26 males) were randomly allocated to either control or test groups. Outcome measures included survival of suprastructures and implants, implant stability quotient, health status of peri-implant tissue, peri-implant marginal bone loss, frequency of complications, and PROMs using Oral Health Impact Profile-14 combined with questionnaire assessing patient perception of peri-implant soft tissue, prosthetic solution, implant function, and implant treatment outcome using visual analogue scale. Mean differences were expressed with standard deviation and 95% confidence interval. Level of significance was .05.

RESULTS

All suprastructures and implants were well-functioning after one year of functional implant loading. There was no significant difference between control and test groups in any of the applied outcome measures. The implant stability significantly increased from implant placement to abutment connection within all groups (p < .001). High patient satisfaction and significant improvement in oral health-related quality of life was also reported within all groups.

CONCLUSION

This study demonstrates that MSFA with composite grafts containing minimal amounts of ABG reveals comparable implant treatment outcomes as compared with ABG alone, after one year of functional implant loading. Extensive ABG harvesting in conjunction with MSFA therefore seems not to be needed.

Does the Outcome of Graft Materials at Dental Implant Sites Differ Between Patients With Normal and Compromised Bone Health?

The objective of this paper was to assess the outcome of bone graft material at alveolar bone augmentation sites combined with dental implants in postmenopausal women with compromised bone health by evaluating cone beam computerized tomography (CBCT) scans at multiple time points.CBCT scans were analyzed on 55 postmenopausal women with compromised bone health status to determine the fate of alveolar bone augmentation. CBCT scans were taken immediately after surgery and 9 and 24 months postoperatively. The patient's medication regimens and durations were recorded, and the pixel intensity value (PIV) was measured and standardized using scoring criteria and visual assessment. Statistical analyses included 2-sample t tests for continuous variables and Fisher's exact tests for categorical variables.Among the normal patients, 73% received a grade 2 visual score, and 27% received a grade 1 visual score. After 24 months, 45% of patients received a grade 2 score, and 27% received a grade 3 score. In the osteoporotic group receiving medication, 77% of participants received a grade 1 visual score at the 9-month postoperative evaluation, while 23% received a grade 2 score. At the 24-month assessment, 55% of patients received a grade 1 score, 41% received a grade 2 score, and only 5% received a grade 3 score. Notably, although the graft material did not remodel into native bone, it was a scaffold for implants in controlled osteoporotic patients. The study's results show that the pixel intensity values of particulate graft materials are similar across the three different time points, suggesting that the graft material's pixel intensity value remains constant in postmenopausal women with osteoporosis. The study's limitations include a small sample size and a restricted 24-month follow-up period. This limited time frame may need to capture long-term changes or variations in graft materials adequately. Future research should include a larger sample size and have a longer follow-up duration to provide a more comprehensive understanding of the change in graft materials between patients with normal and compromised bone health.

Octacalcium phosphate collagen composite for periodontal regeneration in a canine one-wall intrabony defect

OBJECTIVE

This study aimed to evaluate the regenerative capacities of octacalcium phosphate collagen composite (OCP/Col) in one-wall intrabony defects in dogs. The background data discuss the present state of the field: No study has assessed the efficacy of OCP/Col for periodontal regeneration therapy despite the fact that OCP/Col has proved to be efficient for bone regeneration.

METHODS

In six beagle dogs, the mandibular left third premolars were extracted 12 weeks before the experimental surgery. Standardized bone defects (5 mm in height and 4 mm in width) were simulated on the distal surface of the second premolars and mesially on the fourth premolars. The defect was filled with either OCP/Col (experimental group) or left empty (control group). Histological and histomorphometric characteristics were compared 8 weeks after surgery.

RESULTS

No infectious or ankylotic complications were detected at any of the tested sites. The experimental group exhibited a significantly greater volume, height, and area of newly formed bone than the control group. The former also showed a greater height of the newly formed cementum than the latter, although the results were not statistically significant. The newly formed periodontal ligaments were inserted into newly formed bone and cementum in the experimental group.

CONCLUSION

OCP/Col demonstrated high efficacy for bone and periodontal tissue regeneration that can be successfully applied for one-wall intrabony defects.

Critical-sized marginal defects around implants treated with xenografts in rabbits

BACKGROUND

Healing of critical-size defects is a well-known problem that has been challenged in several studies. The aim of the experiment was to evaluate bone formation and osseointegration of implants installed in critical defects of the mandibular body simultaneously grafted with Bio-Oss® or Cerabone®.

MATERIAL AND METHODS

Defects, 10 mm wide and 3 mm deep, were prepared at both lateral aspects of the mandible in 12 rabbits. One implant was installed in the center of the defect, and bovine xenografts produced either at low (Bio-Oss®; Low-T) or high (Cerabone®; High-T) temperatures were used to fill the defects. A collagen membrane was placed to cover the sites. Healing was evaluated 10 weeks after surgery.

RESULTS

In both groups, most sites showed optimal healing with closure of the coronal entrance of the defects. However, residual defects occupied by soft tissues and biomaterial particles were observed, even though generally limited to some regions of the defect. Osseointegration of the implant surface in the region of the defect was poor in both groups.

CONCLUSIONS

Circumferential marginal critical-size defects around implants filled with bovine xenografts presented regions with a complete healing in both groups. However, the healing was not complete at all regions in most defects; therefore, a complete optimal healing of critical-size marginal defects cannot be predicted.

Clinical effectiveness of regenerative periodontal surgery and orthodontic tooth movement with clear aligners in stage IV periodontitis: a case series

OBJECTIVES

To evaluate the clinical effectiveness of regenerative treatment of intrabony defects in combination with consecutive orthodontic therapy with clear aligners in stage IV (type 2) periodontitis.

METHOD AND MATERIALS

Ten patients with a total of 103 intrabony defects were analyzed after regenerative surgery using collagen-deproteinized bovine bone mineral with or without collagen membrane or enamel matrix derivative followed by orthodontic therapy with clear aligners. Changes in radiographic bone level and probing pocket depths were evaluated after 1 year (T1) and at final splinting (T2) after orthodontic tooth movement.

RESULTS

Mean radiographic bone level gain was significant, with 2.13 ± 1.64 mm at T1 and 3.02 ± 2.00 mm at T2. Mean probing pocket depth was significantly reduced from 5.40 ± 1.80 mm at baseline to 3.78 ± 1.73 mm at T1, and remained stable with 3.73 ± 1.70 mm at T2. Pocket closure (≤ 4 mm probing pocket depth) was accomplished in 76% of all defects. Tooth loss amounted to 2.9%.

CONCLUSION

Within the limitations of the retrospective study design, the findings suggest that the interdisciplinary treatment of periodontitis stage IV by regenerative periodontal surgery and consecutive orthodontic therapy with clear aligners can lead to favorable results.

Implant stability and clinical outcome between implant placement using internal sinus floor elevation with alloplastic bone material grafting and without grafting: A 1-year randomized clinical trial

OBJECTIVE

To compare implant stability and clinical outcome in implant placement between osteotome sinus floor elevation (OSFE) with biphasic calcium phosphate (BCP) which consisted of 30% of hydroxyapatite (HA) and 70% of beta-tricalcium phosphate (β -TCP) grafting material and OSFE without using bone grafting material. The research questions is whether the BCP provides any benefit in OSFE or not.

MATERIALS AND METHODS

Thirty patients (30 implants) with a single edentulous area of upper premolar or molar were randomly separated into OSFE with BCP (n = 15) and OSFE without grafting (n = 15). The patients were reevaluated 3, 6, 9, and 12 months after implant loading. The clinical assessments (implant stability quotient (ISQ), implant survival-failure rate, and surgical complication) were analyzed. Together with radiographic assessments in 2D (endo-sinus bone gain (ESBG), mean marginal bone change (MMBC)) and 3D (endo-sinus bone gain in CBCT (ESBG-CT)) were evaluated, with a mean follow-up time of at least 12 months of functional loading and prosthetic complication.

RESULTS

20 remaining implants (OSFE with BCP, n = 10; OSFE without grafting, n = 10) were analyzed. Mean ISQ was 79.18 ± 3.43 in 1-year follow-up (ISQ; OSFE with BCP = 78.72 ± 3.46, OSFE without grafting = 79.65 ± 3.52). ISQ in both groups increased steadily without significant differences in each follow-up. (p = 0.56). In radiographic evaluation, at 6-, 9-, and 12-month, OSFE without grafting group showed statistically significant lower MMBC (p < 0.05). The 1-year clinical results showed that 2 implants failed in OSFE with BCP, and 1 implant failed in OSFE without grafting.

CONCLUSIONS

Graft material "BCP" (HA30:TCP70) coupled with OSFE presents no extraordinary benefit in implant stability, clinical and radiographic outcome in 1-year follow-up.

CLINICAL RELEVANCE

Clinically, OSFE with grafting materials provides no additional benefit.

CLINICAL TRIAL REGISTRATION NUMBER

TCTR20210517008 (date of registration: May 17, 2021).

A comparative analysis of particulate bovine bone substitutes for oral regeneration: a narrative review

PURPOSE

Particulate bovine bone substitutes (BS) are commonly used in oral regeneration. However, more literature is needed focusing on comparative analyses among various particulate bovine BS. This study evaluates pre-clinical and clinical data of different particulate bovine BS in oral regeneration.

METHODS

A narrative review was conducted by screening the PubMed database Included in the review were pre-clinical and clinical studies until 2024 comparing a minimum of two distinct particulate bovine BS. In addition to examining general data concerning manufacturing and treatment processes, biological safety, physical and chemical characteristics, and graft resorption, particular emphasis was placed on assessing pre-clinical and clinical data related to ridge preservation, sinus floor elevation, peri-implant defects, and various forms of alveolar ridge augmentation utilizing particulate bovine BS.

RESULTS

Various treatment temperatures ranging from 300 to 1,250 °C and the employment of chemical cleaning steps were identified for the manufacturing process of particulate bovine BS deemed to possess biosecurity. A notable heterogeneity was observed in the physical and chemical characteristics of particulate bovine BS, with minimal or negligible graft resorption. Variations were evident in particle and pore sizes and the porosity of particulate bovine BS. Pre-clinical assessments noted a marginal inclination towards favorable outcomes for particulate bovine BS subjected to higher treatment temperatures. However, clinical data are insufficient. No distinctions were observed regarding ridge preservation, while slight advantages were noted for high-temperature treated particulate bovine BS in sinus floor elevation.

CONCLUSIONS

Subtle variances in both pre-clinical and clinical outcomes were observed in across various particulate bovine BS. Due to inadequate data, numerous considerations related to diverse particulate bovine BS, including peri-implant defects, must be more conclusive. Additional clinical studies are imperative to address these knowledge gaps effectively.

Synchrotron Analysis of Damaged Extraction Sockets Augmented Using a Synthetic Bone Block: A Pilot Study

This study aimed to investigate the dimensional stability and quality of the alveolar ridge augmented using a synthetic bone block (SBB) at damaged extraction sockets. Four participants were included, and socket augmentation was performed using SBB and a collagen membrane. Intraoral and CBCT scans were performed before extraction (baseline), immediately postoperative (IP), and at 6 months postoperative (6M). At 6M, a trephine biopsy sample was obtained during implant placement, and the sample was observed using synchrotron. Soft tissue profile changes were assessed using profilometric analysis of the intraoral scan data, while dimensional changes in hard tissue were evaluated based on CBCT measurements. Bone quality was analyzed using synchrotron imaging. There were minimal changes in the soft tissue profile between baseline and IP, baseline and 6M, and IP and 6M (0.11 ± 1.08 mm3, 0.02 ± 0.8 mm3, and -0.65 ± 0.82 mm3, respectively). Horizontal bone width was measured at 1-mm increments from the augmented bone crest to 5 mm apically and revealed only a slight reduction (< 1 mm) at all levels between IP and 6M. The augmented bone height was well maintained from IP until 6M (-0.21 ± 0.53 mm). Synchrotron analysis revealed low to moderate bone quality after 6M (percentage of new bone: 16.49% ± 4.91%). Socket augmentation using SBB appears to be a viable technique for regenerating damaged extraction sockets, with the augmented ridge dimensions maintained up to 6M. Further long-term randomized clinical trials are needed.

Novel Synthetic Carbonate Apatite as a Bone Substitute in Implant Treatments: Case Reports

Bone graft materials are often used in implant treatment to optimize functional and esthetic outcomes. The requirements for bone grafting materials are the ability to maintain space for bone regeneration to occur and the capability of being resorbed by osteoclasts and replaced with new bone tissue occurring in passive chemolysis and bone remodeling. Carbonate apatite (CO3Ap) granules (Cytrans Granules, GC) are a chemically synthetic bone graft material similar to autogenous bone minerals and more biocompatible than allografts and xenografts. The aim of this report is to evaluate the efficacy of CO3Ap granules in implant treatments when used alone or in combination with autogenous bone. The clinical findings and the radiographic and histologic assessments in three cases of immediate implant placement and lateral and vertical guided bone regeneration are reported. Despite the short-term follow-ups, histologic findings showed that CO3Ap granules were efficiently resorbed and replaced bone in clinical use. Furthermore, the clinical findings showed that CO3Ap granules maintained their morphology around the implant. This limited short-term case report suggests that this bone substitute is effective. However, further clinical studies and long-term reports of this new biomaterial are needed.

Contour Augmentation for Periodontal Defects (CAPD) for Periodontally Compromised Teeth with Horizontal Bone Loss: A Prospective Cohort Assessment at 1 Year

This study assessed the effects of buccal contour augmentation for periodontally compromised teeth with horizontal bone loss. A total of 30 subjects were divided into Group A or Group B (n = 15 subjects per group). Group A received open-flap debridement (OFD) with buccal contour augmentation using deproteinized bovine bone mineral (DBBM), jointly referred to as contour augmentation for periodontal defects (CAPD; test group). Group B received only OFD (control group). Bleeding on probing (BOP), clinical attachment level (CAL), probing depth (PD), gingival recession (GR), keratinized mucosa width (WKM), keratinized mucosa thickness (TKM), and labial cortical plate thickness were compared at baseline and 1 year. BOP, CAL, PD, and GR did not show significant differences. TKM increased by 1.76 mm for Group A but decreased by 1 mm for Group B. WKM increased from 2.86 ± 0.4 mm to 3.6 ± 0.71 mm (P < .001) and from 2.93 ± 0.32 mm to 3 ± 0.7 mm (P = 0.5) for Groups A and B, respectively, which showed statistical significance. Labial cortical plate thickness increased from 0.94 ± 0.3 mm to 1.95 ± 0.54 mm (P < .001) for Group A but decreased from 0.87 ± 0.45 mm to 0.68 ± 0.31 mm for Group B. Visual analog scale scores for pain perception showed no difference between the two groups. CAPD for periodontally compromised teeth improves WKM and TKM. Long-term analyses are needed to determine its benefits in daily clinical practice.

Use of F18 bioglass putty for induced membrane technique in segmental bone defect of the radius in rabbits

PURPOSE

To evaluate the inductive capacity of F18 bioglass putty on the induced membrane technique in a segmental bone defect of the rabbit's radius.

METHODS

Ten female Norfolk at 24 months of age were used. The animals were randomly separated based on postoperative time points: five rabbits at 21 and four at 42 days. A 1-cm segmental bone defect was created in both radii. The bone defects were filled with an F18 bioglass putty.

RESULTS

Immediate postoperative radiographic examination revealed the biomaterial occupying the segmental bone defect as a well-defined radiopaque structure with a density close to bone tissue. At 21 and 42 days after surgery, a reduction in radiopacity and volume of the biomaterial was observed, with particle dispersion in the bone defect region. Histologically, the induced membrane was verified in all animals, predominantly composed of fibrocollagenous tissue. In addition, chondroid and osteoid matrices undergoing regeneration, a densely vascularized tissue, and a foreign body type reaction composed of macrophages and multinucleated giant cells were seen.

CONCLUSIONS

the F18 bioglass putty caused a foreign body-type inflammatory response with the development of an induced membrane without expansion capacity to perform the second stage of the Masquelet technique.

Comparison Between Corticocancellous Allograft and Bovine Xenograft for Sinus Augmentation: A Radiographic, Histologic, and Histomorphometric Clinical Study

Sinus floor augmentation is one of the most common approaches to obtain sufficient bone availability for placing implants in cases with severe bone atrophy in the posterior maxilla. Several bone substitutes are indicated for sinus augmentation, but they may achieve different clinical outcomes. This study aims to compare bovine bone mineral (BBM) with freeze-dried bone allograft (FDBA) in a two-stage lateral window sinus grafting approach. Twenty patients received a lateral window sinus elevation with either FDBA or BBM. Postoperative graft height was measured with CBCT. Implants were placed 6 months later, at which time biopsy samples were taken for histologic analysis and new CBCT scans were performed to measure graft height. The mean height reduction at 6 months was 20.27% ± 4.94% for FDBA samples and 5.36% ± 2.41% for BBM samples. The histologic analysis revealed a mean ratio of newly formed bone of 43.70% ± 5.29% for the FDBA group and 38.11% ± 4.03% for the BBM group. The FDBA group also showed a higher amount of residual biomaterial (17.25% ± 10.10%) and connective tissue (14.63% ± 4.38%) compared to the BBM group (15.53% ± 5.42% and 13.11% ± 4.42%, respectively). The differences between groups were statistically significant for the height reduction and newly formed bone (P ≤ .05) but not for the amounts of residual biomaterial and nonmineralized connective tissue (P ≥ .05). Six months after performing a lateral window sinus elevation, the percentage of newly formed bone was significantly higher when using FDBA than when using BBM, although the graft height reduction was also significantly higher for the FDBA group.

Comparative Studies of Bone Graft and Orthobiologics for Foot Ankle Arthrodesis: A Critical Review

Graft materials available to supplement hindfoot and ankle arthrodesis procedures include autologous (autograft) or allogeneic bone graft (allograft) but also bone graft substitutes such as demineralized bone matrix, calcium sulfate, calcium phosphate, and tricalcium phosphate/hydroxyapatite. In addition, biologic agents, such as recombinant human bone morphogenetic protein-2 or recombinant human platelet derived growth factor-BB (rhPDGF-BB), and preparations, including platelet-rich plasma or concentrated bone marrow aspirate, have been used to facilitate bone healing in ankle or hindfoot arthrodesis. The purpose of this review was to summarize the available clinical evidence surrounding the utilization and efficacy of the above materials and biological agents in ankle or hindfoot arthrodesis procedures, with emphasis on the quality of the existing evidence to facilitate clinical decision making.

Time to full weight-bearing with the use of a calcium sulfate-calcium phosphate bone substitute as a bone void filler following extended curettage in the treatment of primary benign bone tumours

PURPOSE

The primary objective of this study was to determine time to full weight-bearing after the use of a calcium-sulfate-calcium phosphate bone substitute (CaSO4/CaPO4) as a bone void filler in the treatment of primary benign bone tumours following intralesional curettage. The secondary objectives were to determine surgical complications and recurrence rates.

METHODS

Retrospective review of patients identified from a surgeon-specific orthopaedic oncology database, who underwent curettage of benign bone tumours and subsequent bone void filling with CaSO4/CaPO4.

RESULTS

A total of 39 patients (20 males, 19 females) met inclusion criteria with an average age of 31 years (range: 13 to 62 years), a median follow-up of 3.7 years, and a maximum follow-up of 11 years. The most common tumour diagnosis was giant cell tumour of bone (GCT) (n = 19), and the most common location was the proximal tibia (n = 9). The mean volume of tumour excised was 74.1 cm3 including extraosseous bone expansion due to tumour growth, with a mean of volume of 21.4 mL of CaSO4/CaPO4 used to fill the intraosseous cavitary defects to restore normal bone anatomy. None of the lesions required additional internal fixation. The primary outcome measure, average time to full weight-bearing/full range of motion, was 11 weeks and 6 weeks for upper and lower extremity lesions, respectively. Secondary outcomes included tumour recurrence requiring reoperation in five patients and infection requiring reoperation in two patients.

CONCLUSION

This study demonstrates that CaSO4/CaPO4 is a viable option as a bone void filler in the reconstruction of cavitary defects following removal of primary benign bone tumours. CaSO4/CaPO4 provides sufficient bone regeneration early in the post-operative period to allow progression to full weight-bearing within weeks without the need for internal fixation. There were no graft-specific complications noted.

Comparison of different bone substitutes in the repair of rat calvaria critical size defects: questioning the need for alveolar ridge presentation

OBJECTIVE

This study aimed to evaluate the effectiveness of biomaterials in bone healing of critical bone defects created by piezoelectric surgery in rat calvaria.

METHOD AND MATERIALS

Histomorphologic analysis was performed to assess bone regeneration and tissue response. Fifty animals were randomized into five groups with one of the following treatments: Control group (n = 10), spontaneous blood clot formation with no bone fill; BO group (Bio-Oss, Geistlich Pharma; n = 10), defects were filled with bovine medullary bone substitute; BF group (Bonefill, Bionnovation; n = 10), defects were filled with bovine cortical bone substitute; hydroxyapatite group (n = 10), defects were filled with hydroxyapatite; calcium sulfate group (n = 10), defects were filled with calcium sulfate. Five animals from each group were euthanized at 30 and 45 days. The histomorphometry calculated the percentage of the new bone formation in the bone defect.

RESULTS

All data obtained were evaluated statistically considering P < .05 as statistically significant. The results demonstrated the potential of all biomaterials for enhancing bone regeneration. The findings showed no statistical differences between all the biomaterials at 30 and 45 days including the control group without bone grafting.

CONCLUSION

In conclusion, the tested biomaterials presented an estimated capacity of osteoconduction, statistically nonsignificant between them. In addition, the selection of biomaterial should consider the specific clinical aspect, resorption rates, size of the particle, and desired bone healing responses. It is important to emphasize that in some cases, using no bone filler might provide comparable results with reduced cost and possible complications questioning the very frequent use of ridge presentation procedures.

Histologic evaluation of edentulous alveolar ridge horizontal bone augmentations using a xenogeneic bone substitute and autologous platelet concentrates: a case series

OBJECTIVES

This case series aimed to assess the efficacy of a novel horizontal ridge augmentation modality using histology. Combinations of "sticky bone" and tenting screws without autologous bone were used as augmentative materials.

METHOD AND MATERIALS

Five individuals presenting healed, atrophic, partially edentulous sites that required horizontal bone augmentation before implant placement were enrolled. Patients underwent the same augmentation type and 5 months of postoperative reentry procedures. The first surgery served as implant site development, whereas the biopsy and corresponding implant placement were performed during reentry. The bone was qualitatively analyzed using histology and histomorphometry and quantitatively evaluated using CBCT.

RESULTS

Four individuals healed uneventfully. Early wound dehiscence occurred in one case. Histology showed favorable bone substitute incorporation into the newly formed bone and intimate contact between de novo bone and graft material in most cases. Histomorphometry revealed an average of 48 ± 28% newly formed bone, 19 ± 13% graft material, and 33 ± 26% soft tissue components. The CBCT-based mean alveolar ridge horizontal increase was 3.9 ± 0.6 mm at 5 months postoperatively.

CONCLUSIONS

The described augmentation method appears suitable for implant site development resulting in favorable bone quality according to histology. However, clinicians must accommodate 1 to 2 mm of resorption in augmentative material width at the buccal aspect.

Histological and radiological outcome after horizontal guided bone regeneration with bovine bone mineral alone or in combination with bone in edentulous atrophic maxilla: A randomized controlled trial

OBJECTIVE

To assess the radiological and histological outcome after horizontal guided bone regeneration (GBR) with deproteinized bovine bone mineral (DBBM) alone or in combination with particulate autogenous bone (PAB).

MATERIALS AND METHODS

Eighteen edentulous patients with an alveolar ridge of ≤4 mm were included in this split-mouth randomized controlled trial. Horizontal GBR with a graft composition of 100% DBBM (100:0) on one side and 90% DBBM and 10% PAB (90:10) on the other side were conducted in all patients. Cone beam computed tomography (CBCT) was obtained preoperatively, immediately postoperative, and after 10 months of healing. Width and volumetric changes in the alveolar process were measured on CBCT. Implants were placed after 10 months of graft healing where biopsies were obtained for histomorphometrical evaluation.

RESULTS

The gained widths were 4.9 (±2.4) mm (100:0) and 4.5 (±2.0) mm (90:10) at 3 mm from the top of the crest, and 5.6 (±1.3) mm (100:0) and 4.6 (±2.1) mm (90:10) at 6 mm from the top of the crest. The mean volumetric reductions were 32.8% (±23.8) (100:0) and 38.2% (±23.2) (90:10). Histomorphometry revealed that mean percentages of bone were 50.8% (±10.7) (100:0) and 46.4% (±11.3) (90:10), DBBM were 31.6% (±12.6) (100:0) and 35.4% (±14.8) (90:10), and non-mineralized tissue were 17.6% (±11.7; 100:0) and 18.2% (±18.2) (90:10). No significant differences were evident between in any evaluated parameters.

CONCLUSIONS

There were no additional effects of adding PAB to DBBM regarding bone formation, width changes, or volumetric changes after 10 months of graft healing.

Treatment of Sinus Graft Infection After Sinus Floor Elevation: A Series of Four Case Reports

This report of cases aims to share our treatment experiences in 4 sinus graft infection cases after sinus floor elevation and simultaneous implant placement. The preoperative and postoperative intraoral and radiographic photographs were collected and used to assess the treatment outcomes. The sinus cavity status, bone augmentation results, and implant stability were used as measurements to determine the treatment effectiveness. Four patients received partial graft removal as their surgical treatment for sinus graft infection combined with antibiotic therapy, with or without immediate secondary grafting. After early intervention, antibiotic therapy, and partial debridement of the infected sinus grafts, radiographic and clinical outcomes indicate successful resolution of the graft infection and stable bone graft levels around the implants. The keys to the successful management of the sinus graft infection were: early detection of the infection; early intervention, including partial debridement of the infected graft particles; and antibiotic therapy.

Gene expression, micro-CT and histomorphometrical analysis of sinus floor augmentation with biphasic calcium phosphate and deproteinized bovine bone mineral: A randomized controlled clinical trial

AIMS

The aim of this randomized controlled clinical trial was to compare the gene expression, micro-CT, histomorphometrical analysis between biphasic calcium phosphate (BCP) of 70/30 ratio and deproteinized bovine bone mineral (DBBM) in sinus augmentation.

MATERIALS AND METHODS

Twenty-four patients in need for sinus floor augmentation through lateral approach were randomized into BCP 70/30 ratio or DBBM. After at least 6 months of healing, a total of 24 bone specimens were collected from the entire height of the augmented bone at the area of implant placement and underwent micro-CT, histomorphometric and gene expression analysis. The 12 bone specimens of BCP 70/30 ratio were equally allocated to micro-CT and histologic analysis (test group, n = 6) and gene expression analysis (test group, n = 6). Similarly, the 12 bone specimens of DBBM were also allocated to micro-CT and histologic analysis (control group, n = 6) and gene expression analysis (control group, n = 6). The newly formed bone, remaining graft materials and relative change in gene expression of four target genes were assessed.

RESULTS

The micro-CT results showed no statistically significant difference in the ratio of bone volume to total volume (BV/TV ratio) for the two groups (BCP 41.51% vs. DBBM 40.97%) and the same was true for residual graft material to total volume (GV/TV ratio, BCP 9.97% vs. DBBM 14.41%). Similarly, no significant difference was shown in the histological analysis in terms of bone formation, (BCP 31.43% vs. DBBM was 30.09%) and residual graft area (DBBM 40.76% vs. BCP 45.06%). With regards to gene expression, the level of ALP was lower in both groups of bone grafted specimens compared with the native bone. On the contrary, the level of OSX, IL-1B and TRAP was higher in augmented bone of both groups compared with the native bone. However, the relative difference in all gene expressions between BCP and DBBM group was not significant.

CONCLUSIONS

The BCP, HA/β-TCP ratio of 70/30 presented similar histological and micro-CT outcomes in terms of new bone formation and residual graft particles with DBBM. The gene expression analysis revealed different gene expression patterns between augmented and native bone, but showed no significant difference between the two biomaterials.

[Meta-analysis of autologous bone grafts and bone substitute for the treatment of tibial plateau fractures]

OBJECTIVE

To explore clinical efficacy of autologous bone grafts and bone substitute for the treatment of tibial plateau fractures by Meta analysis.

METHODS

Controlled clinical studies on autogenous bone transplantation and bone substitutes in treating tibial plateau fractures published on PubMed,Web of Science,CNKI,Wanfang and other databases from January 2005 to August 2022 were searched by computer. Literature screening and data extraction were performed according to randomized controlled trial(RCT),and the quality of RCT were evaluated by using intervention meta-analysis criteria in Cochrane manual. Meta-analysis of joint depression,secondary collapse rate of articular surface,blood loss,operative time and infection rate between two methods were performed by Rev Man 5.3 software.

RESULTS

Seven RCT studies (424 patients) were included,296 patients in bone replacement group and 128 patients in autograft group. Operative time [MD=-16.79,95%CI(-25.72,-7.85),P=0.000 2] and blood loss[MD=-70.49,95%CI(-79.34,-61.65),P<0.000 01] between two groups had statistically differences,while joint depression[MD=-0.17,95%CI(-0.91,0.58),P=0.66],secondary collapse rate of joint surface[RR=-0.74, 95%CI(0.35,1.57),P=0.43],infection rate [RR=1.21,95%CI(0.31,4.70),P=0.78] between two groups had no differences.

CONCLUSION

The effects of bone substitute and autograft for the treatment of tibial plateau fracture have similar effects in terms of joint depression,secondary articular surface collapse rate and infection rate. However,compared with autologous bone transplantation,bone replacement could reduce blood loss and shorten operation time.

Assessment of bone regeneration after maxillary radicular cyst enucleation with or without bone grafting materials: a retrospective cohort study

OBJECTIVE

The limitations of spontaneous bone healing underscore the necessity for exploring alternative strategies to enhance bone regeneration in maxillary radicular cyst cases. This retrospective study aimed to assess the impact of a bone substitute material (i.e., Bio-Oss) on bone volume regeneration following maxillary radicular cyst enucleation using cone-beam computed tomography (CBCT).

MATERIALS AND METHODS

Seventy-three patients with maxillary radicular cysts were divided into two groups: one undergoing guided bone regeneration (GBR) with Bio-Oss and absorbable collagen membrane (n = 35), and the other receiving cyst excision alone (n = 38). Volumetric measurements using Amira software on CBCT scans evaluated bone regeneration, with cystic lesion shrinkage rates calculated. Intergroup comparisons utilized independent sample t-tests (P < 0.05), and linear regression analysis assessed the influence of preoperative cyst volume and group on bone healing.

RESULTS

Both groups showed similar success rates in bone formation at the 12-month follow-up, with no significant differences between them (mean (SD), control: 75.16 (19.17) vs. GBR: 82 (20.22), P > 0.05). Linear regression analysis revealed a negative correlation between preoperative cyst volume and bone regeneration in both groups (P < 0.05).

CONCLUSION

Bio-Oss may not significantly enhance bone augmentation in maxillary radicular cysts. In addition, preoperative cyst volume negatively affected the shrinkage rate of cystic lesions.

CLINICAL RELEVANCE

Clinicians should consider patient-specific factors such as anatomy and lesion size when determining the need for bone substitute materials. Future research could focus on optimizing treatment protocols and alternative regenerative strategies to improve patient outcomes in maxillary cyst cases.

Ridge preservation using a self-retaining block type bone substitute for extraction sockets with buccal dehiscence defects - A preclinical study

OBJECTIVE

To evaluate the effect of a self-retaining block-type bone substitute (srBB) on the dimensional stability of the horizontal ridge width at the coronal level in a buccal dehiscence model.

MATERIALS AND METHODS

Four box-shaped bone defects with a buccal dehiscence were surgically prepared in the partially edentulous mandible (n = 6). Experimental biomaterials were randomly assigned to each site: (1) Control group: no treatment, (2) particle-type bone substitute (PBS) group, (3) collagenated soft block bone substitute (csBB) group, and (4) self-retaining synthetic block bone (srBB) group. In all grafted groups, a collagen membrane covered the biomaterials. At 16 weeks, clinical, histological, and radiographic analyses were performed.

RESULTS

Three of the six blocks in the srBB group became exposed and fell out during the first week after surgery. Therefore, the remaining three specimens were renamed RsrBB group. The RsrBB group showed an increase horizontal ridge compared to the pristine bone width at 2-4 mm below the CEJ, while the other groups showed resorption (augmented width at 2 mm below: 4.2, 42.4, 36.2, and 110.1% in the control, PBS, csBB, and RsrBB groups, respectively). The mineralized bone area was largest in the RsrBB group (4.74, 3.44, 5.67, and 7.77 mm2 in the control, PBS, csBB, and RsrBB groups, respectively.).

CONCLUSIONS

The srBB group demonstrated the highest volume stability at the coronal level. These findings would potentially suggest that self-retaining block bone substitute might be a good candidate for alveolar ridge preservation.