Setting the boundaries and scope of practice for the two sister specialities of dentistry: Operative dentistry-endodontics and prosthodontics

Dental academia in Pakistan has recently achieved an important milestone. The name of Operative Dentistry speciality has been changed to Operative Dentistry & Endodontics (ODE). It was a much-needed change that was first felt about two decades ago. However, with the correction of name, there are certain challenges that this speciality has to manage now. These include improving the curriculum, setting up standards, and lastly, setting up its boundaries and scope of practice as some of its scope overlaps with a sister speciality called Prosthodontics. This overlapping of the boundaries of dental disciplines is a problem that is unique to Pakistan, India, and some East Asian countries where Operative Dentistry or Conservative Dentistry is combined with Endodontics. This paper aims to discuss the objective delineation of dental procedures and suggest a model of peaceful co-existence of sister dental specialities.

Teaching of composite restoration repair in Brazilian dental schools

OBJECTIVES

The aim was to investigate aspects of the teaching of restoration repair as a minimally invasive alternative to replacing defective direct composite restorations in undergraduate curricula teaching programs in Brazilian dental schools.

METHODS

A 14-item validated survey questionnaire was mailed to directors/coordinators of operative/restorative dentistry teachers of Brazilian Dental Schools. Data were collected on demographic characteristics of the teachers and institutions, together with questions on the teaching of the repair of defective resin-based composite restorations as part of the school curriculum; the rationale behind the teaching; the nature of the teaching (preclinical and/or clinical); how techniques were taught, indications for repair, operative techniques, materials used, patient acceptability and expected longevity of completed repairs.

RESULTS

Two hundred and twenty-two (94%) directors/ coordinators of dental curricula in Brazil were contacted. One hundred and thirty-one directors/coordinators (59%) replied, providing the e-mail address from the teacher responsible for the operative/restorative dentistry program in their school. Of these, 104 responded to the questionnaire (79% response rate). Ninety-three (89%) of the participating schools reported teaching composite repairs as an alternative to replacing restorations. Of the theoretical content, 43% was taught at preclinical and clinical levels, whereas most practical experience (53%) was acquired at clinical levels. Eighty-eight schools (95%) reported tooth substance preservation being the main reason for teaching repair techniques. All schools that taught repairs reported high patient acceptability.

CONCLUSIONS

The teaching of composite restoration repair as an alternative to restoration replacement is established in undergraduate programs in most of the Brazilian dental schools surveyed.

CLINICAL SIGNIFICANCE

The reasons for teaching restoration repair in Brazil were found to be quite unanimous among teachers, especially regarding the preservation of tooth structure. Variations were found in the clinical indications for repair, suggesting the need for further investigations. Monitoring repaired restorations should be encouraged and could contribute to future studies.

3D Digital technology as an alternative educational tool in preclinical dentistry

INTRODUCTION

The advancement of 3D digital scanners has allowed educators to uphold the quality of education whilst implementing novel methods of assessment.

OBJECTIVE

The purpose of this study was to compare two evaluation methods, conventional and digital scanned assessments, on student cavity preparations and students and faculty's perceptions of these assessment methods.

METHODS

Predoctoral students performed Class II amalgam and Class III resin composite preparations on simulated teeth for their preclinical competency examinations. Two calibrated faculty evaluated the students' preparations using dental instruments for conventional assessments and 3D scanned images for digital assessments. Faculty scores from both assessment methods were compared and statistically analysed (p < .05). Students also self-assessed their performance using the digital scanned images and filled out a perception survey.

RESULTS

There was no statistically significant difference between the conventional (Class II; 73.3 ± 12.2 and Class III; 82.5 ± 8.9) and the digital assessment with scanned images (Class II; 71.3 ± 11.0 and Class III; 82.2 ± 8.2). Faculty scores from both methods have shown a trend of comparability. Most students agreed that digital ideal preparation models were useful (84.2%) and almost all students agreed that digital technology helped them learn operative dentistry (91.1%). In contrast, most students agreed that conventional assessment should be the main self-evaluation system (82.2%) and disagreed that digital assessment is more effective than conventional self-assessment (68.3%).

CONCLUSION

Our study demonstrated that 3D digital technology could be an alternative and/or supplementary educational tool to aid in upholding the quality of dental education.

Usability, acceptance, and educational usefulness study of a new haptic operative dentistry virtual reality simulator

BACKGROUND

Dental preclinical training has been traditionally centered onverbal instructions and subsequent execution on phantom heads and plastic training models. However, these present present limitations. Virtual Reality (VR) and haptic simulators have been proposed with promising results and advantages and have showed usefullness in the preclinical training environment. We designed DENTIFY, a multimodal immersive simulator to assist Operative Dentistry learning, which exposes the user to different virtual clinical scenarios while operating a haptic pen to simulate dental drilling.

OBJECTIVE

The main objective is to assess DENTIFY's usability, acceptance, and educational usefulness to dentists, in order to make the proper changes and, subsequently, to test DENTIFY with undergraduate preclinical dental students.

METHODS

DENTIFY combines an immersive head mounted VR display, a haptic pen in which the pen itself has been replaced by a 3D printed model of a dental turbine and a controller with buttons to adjust and select the scenario of the simulation, along with 3D sounds of real dental drilling. The user's dominant hand operated the virtual turbine on the VR-created scenario, while the non-dominant hand is used to activate the simulator and case selection. The simulation sessions occurred in a controlled virtual environment. We evaluated DENTIFY's usability and acceptance over the course of 13 training sessions with dental professionals, after the users performed a drilling task in virtual dental tissues.

RESULTS

The conducted user acceptance indicates that DENTIFY shows potencial enhancing learning in operative dentistry as it promotes self-evaluation and multimodal immersion on the dental drilling experience.

CONCLUSIONS

DENTIFY presented significant usability and acceptance from trained dentists. This tool showed to have teaching and learning (hence, pedagogical) potential in operative dentistry.

The impact of COVID-19 pandemic on student performance and self-evaluation in preclinical operative dentistry

INTRODUCTION

During the COVID-19 pandemic, dental schools were required to reformat their curricula to accommodate regulations mandated to protect the health of students and faculty. For students enrolled in the Operative Dentistry preclinical courses at the Harvard School of Dental Medicine (HSDM), this modified curriculum included frontloading the course with lectures delivered remotely, followed by in-person laboratory exercises of learned concepts. The aim of this article was to determine the impact that the modifications had on student performance and student self-evaluation capabilities.

MATERIALS AND METHODS

Thirty-eight students were introduced to this restructured course. Their performance in a final multiple-choice (MC) examination, four preclinical laboratory competency assessments (class II amalgam preparation and restoration, class III composite preparation and restoration) and their self-assessment of these preclinical competency assessments were then compared with the pre-COVID pandemic (P-CP) classes from years 2014 to 2019 (n = 216 students). Linear regressions were performed to determine differences in mean faculty scores, self-assessment scores, student-faculty score gaps (S-F gaps) and absolute S-F gaps seen between the class impacted by the pandemic and the P-CP classes.

RESULTS

The results demonstrated that students during the COVID-19 pandemic (D-CP) had a higher average faculty score in all four preclinical laboratory competency assessments and in the final MC examination. In addition, the S-F gap was smaller in this cohort as compared with the P-CP classes.

CONCLUSION

Despite the challenges of restructuring the preclinical curricula, D-CP students performed better than their P-CP predecessors in multiple facets of this Operative Dentistry course including self-assessment accuracy.

Assessing dental students' professional satisfaction with operative dentistry teaching and curriculum: A study in Saudi Arabia

ABSTRACT

Evaluating students' professional training satisfaction with operative dentistry teaching and curriculum can help identify their educational needs and improve the quality of the education imparted. This study aimed to assess the professional training satisfaction of senior undergraduate dental students in Saudi Arabia from the operative dentistry course teaching and its curriculum at different levels and among genders.A total of 193 (109 male, 56.48%; and 84 female, 43.52%) students participated in the survey. The respondents were at the 10th, 11th, and 12th levels of the Operative Dentistry course in a ratio of 34.2%, 32.1%, and 33.7%, respectively. Data were collected from survey items (18 questions) covering 6 areas: learning objectives, course materials, content relevance, instructor knowledge, instructor delivery and style, and facility and environment. Descriptive and analytical tests were performed using SPSS Software 19, with the significance level set at 0.05.A high level of satisfaction was seen among level 10 (68.18%), 11 (79.03%), and 12 (86.15%) students. A significant statistical difference was observed among level 10 students with a low level of satisfaction and a high level of satisfaction (P = .045). The percentage of satisfaction increased with the level. A high level of satisfaction was seen among male (78.90%) and female (76.19%) students, with a total satisfaction level of 77.72%.Continuous evaluation and assessment of teaching and curriculum can be a tool to improve the quality of education imparted, especially in clinical courses such as operative dentistry. This helps to prepare students for their professional life as healthcare providers. The role of teaching skills related to amalgam must be re-evaluated. It is recommended to include student representation and participation in course development committees, as they are the final recipients of the educational process.

Assessing likelihood of using the Bruininks-Oseretsky test of motor proficiency to predict preclinical performance of dental students

Objective

The acquisition of motor skills is a key competency for the practice of dentistry, and innate abilities have been shown to influence motor performance. Thus, finding the most efficient manual dexterity tests may predict performance of dental students. The current study used the Bruininks-Oseretsky Test of Motor Proficiency, to assess motor skills of first year (D1) and second year (D2) dental students.

Materials and methods

Three fine motor subsets of the BOT-2-fine motor precision, fine motor integration, and manual dexterity-were administered to D1 and D2 dental students in 2017 and 2018. The BOT-2 subset scores of D1 students were compared with those of D2 students, who had preclinical dental experiences. For D2 students, we tested for correlations between BOT-2 subset scores and performance scores in a preclinical operative dentistry course.

Results

No differences were found between D1 and D2 students for any BOT-2 subtest scores (all Ps > .09). No correlations were found between total scores of each BOT-2 subtest and the operative dentistry course for D2 students (all Ps > .20).

Conclusions

Our results suggested the BOT-2 was not predictive of manual skills of dental applicants or preclinical dental students. Although we assumed students would perform well with instruction, practice, and feedback, we were unable to determine whether innate abilities influenced acquisition of manual dexterity skills. More research about the acquisition of technical clinical skills in dentistry is required.

The transition from amalgam to other restorative materials in the U.S. predoctoral pediatric dentistry clinics

Increased concerns about the safety of amalgam restorations in children have resulted in many dental schools emphasizing the teaching of alternative dental materials. This study investigated the current teaching of different dental materials for use in posterior teeth in the United States predoctoral pediatric dentistry programs. In 2011, the authors invited the chairs of the predoctoral pediatric dentistry departments in all accredited dental schools at that time (N = 57) to participate in an internet-based survey. Descriptive statistics were calculated to describe the frequency of using different restorative materials. Regression models were developed to explore the factors related to the use of dental restorations in predoctoral pediatric clinics. Among the 44 dental schools that responded (77% response rate), 74% used amalgam, and 93% used composite in primary posterior teeth. Glass ionomer was used by 61% of the schools in primary posterior teeth. Placing amalgam in primary posterior teeth was associated with programs that treated more 3-5-year-old patients (β = .302, p < .043), whereas the use of glass ionomer was associated with having students serving at off-site satellite dental clinics (β = .015, p < .012). In general, having departments with chairs who had positive attitudes towards Minimal Invasive Dentistry (MID) used composite (β = .091, p < .0001) and glass ionomer (β = 103, p < .0001) more frequently and were less likely to use amalgam (β = -.077, p < .005) in primary posterior teeth. Although teaching MID concepts in predoctoral pediatric clinics in dental schools is increasing, the use of amalgam in posterior primary and permanent teeth is still widely practiced.

Students' self-assessment of competencies in the phantom course of operative dentistry

INTRODUCTION

The aim was to assess the competencies of undergraduate students in their roles of dental expert, scholar, communicator, collaborator, health advocate, manager and professional.

MATERIALS AND METHODS

For this retrospective, pseudonymised observational study (pre-/post-testing), students in two cohorts in their first clinical semester in operative dentistry were asked to judge their competencies (1 = very good to 6 = insufficient) with a learning objective catalogue designed at the Goethe University Frankfurt (modelled after the National Competency-Based Learning Objective Catalogue Dentistry), at the beginning and end of their phantom course. In order to relate the students' subjective competency judgements to objective evidence of their skills, at the end of the semester their marks from the summative Objective Structured Practical Examination (OSPE) were compared with the subjective judgement of their exam performance before the final results were known.

RESULTS

The reliability of the evaluation sheet was evaluated with Cronbach's alpha 0.98. The students judged their competencies as "sufficient" (4.23 ± 0.51) at the beginning and "satisfactory" (2.82 ± 0.43) at the end. A significant improvement in competencies was observed within all roles. The students' subjective judgement of the exam results (3.66 ± 0.62) was significantly correlated with the actual marks (3.69 ± 0.83) in the OSPE at 0.3547 (P = 0.0015).

CONCLUSION

The evaluation instrument showed excellent reliability. The students judged that their competencies significantly increased during the semester. The triangulation with the actual marks in the context of an OSPE demonstrated a significant correlation with the students' exam judgements.

Layered Base Plate Blocks and Operative Dentistry Skills

AIM

Preclinical dental training is essential for the development of psychomotor skills necessary for clinical practice. The study aimed to investigate the impact of teaching with a layered base plate blocks on cavity preparations and students' self-perceived confidence, readiness, and ability.

MATERIALS AND METHODS

A cross-sectional study recruited 52 dental students into two groups; one trained (test) with layered base plate and the other without (control). Students answered an eight-question survey to assess self-perceived confidence, readiness, and ability for performing cavity preparation at the start of their first preclinical operative dentistry course. Students prepared one molar tooth for a class I cavity and two for class II cavities. Preparations were assessed for different elements of depth and outline extension by two blinded examiners.

RESULTS

Statistically significant differences were found between the median scores with respect to the preparation of class II cavities among students exposed to layered base plate (Mann-Whitney U-test, p < 0.05). There were no significant differences between the median scores awarded with respect to the preparation of class I cavity. A statistically significant difference was reported in self-perceived confidence among students who trained with the layered base plate (x², p < 0.05).

CONCLUSION

Training on the layered base plate blocks increased students' initial confidence level in performing cavity preparations, and improved the preparation skills in class II cavity.

CLINICAL SIGNIFICANCE

This study explores the methods of enhancing motor skills taught in preclinical operative dentistry courses, especially in short academic programs.

A survey of cariology teaching in Australia and New Zealand

BACKGROUND

The Australian and New Zealand chapter of the Alliance for a Cavity Free Future was launched in 2013 and one of its primary aims was to conduct a survey of the local learning and teaching of cariology in dentistry and oral health therapy programs.

METHODS

A questionnaire was developed using the framework of the European Organisation for Caries Research (ORCA)/Association of Dental Education in Europe (ADEE) cariology survey conducted in Europe in 2009. The questionnaire was comprised of multiple choice and open-ended questions exploring many aspects of the cariology teaching. The survey was distributed to the cariology curriculum coordinator of each of the 21 programs across Australia and New Zealand via Survey Monkey in January 2015. Simple analysis of results was carried out with frequencies and average numbers of hours collated and open-ended responses collected and compiled into tables.

RESULTS

Seventeen responses from a total of 21 programs had been received including 7 Dentistry and 10 Oral Health programs. Key findings from the survey were - one quarter of respondents indicated that cariology was identified as a specific discipline with their course and 41% had a cariology curriculum in written format. With regard to lesion detection and caries diagnosis, all of the program coordinators who responded indicated that visual/tactile methods and radiographic interpretation were recommended with ICDAS also being used by over half them. Despite all respondents teaching early caries lesion management centred on prevention and remineralisation, many taught operative intervention at an earlier stage of lesion depth than current evidence supports. Findings showed over 40% of respondents still teach operative intervention for lesions confined to enamel.

CONCLUSION

Despite modern theoretical concepts of cariology being taught in Australia and New Zealand, they do not appear to be fully translated into clinical teaching at the present time.

Implementation of augmented reality in operative dentistry learning

OBJECTIVE

To evaluate the efficacy of augmented reality (AR) in the gaining of knowledge and skills amongst dental students in the design of cavity preparations and analyse their degree of satisfaction.

MATERIAL AND METHODS

AR cavity models were prepared for use with computers and mobile devices. Forty-one students were divided into two groups (traditional teaching methods vs AR). Questionnaires were designed to evaluate knowledge and skills, with the administration of a satisfaction questionnaire for those using AR. The degree of compliance with the standards in cavity design was assessed. The Mann-Whitney U-test was used to compare knowledge and skills between the two groups, and the Wilcoxon test was applied to compare intragroup differences. The chi-square test in turn was used to compare the qualitative parameters of the cavity designs between the groups. Statistical significance was considered for P<.05 in all cases.

RESULTS

No significant differences were observed in level of knowledge before, immediately after or 6 months after teaching between the two groups (P>.05). Although the results corresponding to most of the studied skills parameters were better in the experimental group, significant differences (P<.05) were only founded for cavity depth and extent for Class I and divergence of the buccal and lingual walls for the Class II. The experience was rated as favourable or very favourable by 100% of the participants. The students showed preference for computers (60%) vs mobile devices (10%).

CONCLUSIONS

The AR techniques favoured the gaining of knowledge and skills and were regarded as a useful tool by the students.

Challenging the arbitrary cutoff score of 60%: Standard setting evidence from preclinical Operative Dentistry course

INTRODUCTION

This paper conducted standard setting (SS) (Angoff and Hofstee methods) to determine cutoff scores for summative examinations and to compare the derived passing levels to the existing fixed passing score of 60% in the Faculty of Dentistry at King Abdulaziz University.

METHODS

Historic performance data for final examinations in preclinical Operative Dentistry course were used by four raters to conduct both Angoff and Hofstee methods to determine the cut off scores for three academic years (2012, 2013, and 2014).

RESULTS

Both methods yielded higher than 60% cut off scores for each year. For the first examination of academic year 2012, the cutoff score was 64.75, while it was 63.5 for year 2013, and 66.75 for the last academic year of 2014. Hofstee scores were 64.5, 65.25, and 62.25 consecutively for years 2012 through 2014.

CONCLUSIONS

Using Angoff or Hofstee methods, yielded higher than the fixed 60% passing score currently used by the dental school. The use of Angoff method alone is encouraged as there were limitations to using the Hofstee method to determine the cut off score. This finding provides preliminary support to use evidence-based SS methods to determine the cutoff score for the whole Dentistry program.

The Relationship Between Dental Students' Assessment Ability and Preclinical and Academic Performance in Operative Dentistry

Self-assessment is a critical skill for health care professionals. Because these professionals must be lifelong, self-directed learners and self-regulating practitioners, the ability to self-assess is essential for them. The aims of this study were to measure how dental students self-assessed and peer-assessed their performance in preclinical operative procedures and to evaluate any relationship between their assessment ability and preclinical skills or academic performance. The study was conducted from 2015 to 2016. Third-year students at Harvard School of Dental Medicine self-assessed their work on four preclinical practical exams: Class II amalgam preparation, Class II amalgam restoration, Class III composite preparation, and Class III composite restoration. Three faculty members graded the same preparations and restorations. The difference between the students' self-assessment and the mean faculty assessment was calculated as the student-faculty (S-F) gap. An absolute S-F gap was also calculated with absolute values of differences. A total of 71 students completed these practical exams: 36 in the Class of 2016 and 35 in the Class of 2017. All 71 self-assessments for each of the four practical exams were collected for a response rate of 100%. The results showed that the mean S-F gap ranged from 2% to 8%, and the absolute S-F gap ranged from 7% to 12%. Preclinical performance was correlated with self-assessment accuracy. Low-performing students significantly overestimated their self-assessments compared to the rest of the class. High-performing students had more accurate self-assessments and tended to underestimate themselves. Overall, these results showed that the students had room for improving the accuracy of their self-assessments.

Development and Assessment of Discrimination Exercises for Faculty Calibration in Preclinical Operative Dentistry

The aims of this study were to identify the level of interexaminer agreement among preclinical operative dentistry faculty members when grading Class II preparations performed by first-year dental students; to develop discrimination exercises for specific preparation components where interexaminer agreement was poor; and to evaluate if the discrimination exercises were able to improve inter- and intraexaminer agreement. In the preliminary phase of this study, 13 components of 32 Class II cavity preparations were assessed by eight course faculty members at one U.S. dental school. Analysis of average interexaminer agreement on these components revealed that six were below 60%. These were proximal contact clearance, retention groove placement, retention groove depth, preparation walls, preparation margins, and preparation toilet/debris. A 30-minute calibration session was subsequently developed to provide discrimination exercises utilizing 3-D models and digital images of various levels of student performance for five of the six components. Immediately following calibration, the course faculty assessed the same 32 preparations (Phase I) followed by a delayed assessment without calibration (Phase II) approximately six months later. The results showed that overall interexaminer reliability improved after calibration. Although there was a decline in interexaminer reliability after an interval of six months (Phase II), the degree of variation among examiners was lower than in the preliminary assessment. These findings support the use of discrimination exercises for preclinical operative dentistry course faculty to increase interexaminer agreement and thereby improve the consistency of faculty-student communication.

Characteristics Identified for Success by Restorative Dental Science Department Chairpersons

The primary aim of this study was to determine the characteristics that current chairpersons in restorative dentistry, general dentistry, prosthodontics, and operative dentistry departments in U.S. dental schools feel are most relevant in contributing to their success. The secondary aim was to determine these individuals' rankings of the importance of a listed set of characteristics for them to be successful in their position. All 82 current chairs of the specified departments were invited to respond to an electronic survey. The survey first asked respondents to list the five most essential characteristics to serve as chair of a department and to rank those characteristics based on importance. Participants were next given a list of ten characteristics in the categories of management and leadership and, without being aware of the category of each individual item, asked to rank them in terms of importance for their success. A total of 39 chairpersons completed the survey (47.6% response rate; 83.3% male and 16.2% female). In section one, the respondents reported that leadership, vision, work ethic, integrity, communication, and organization were the most essential characteristics for their success. In section two, the respondents ranked the leadership characteristics as statistically more important than the management characteristics (p<0.0001) for being successful in their positions.

Does Reflective Learning with Feedback Improve Dental Students' Self-Perceived Competence in Clinical Preparedness?

The value of dental students' self-assessment is often debated. The aim of this study was to explore whether reflective learning with feedback enabled dental students to more accurately assess their self-perceived levels of preparedness on dental competencies. Over 16 weeks, all third- and fourth-year students at a dental school in the Republic of Korea took part in clinical rotations that incorporated reflective learning and feedback. Following this educational intervention, they were asked to assess their perceptions of their clinical competence. The results showed that the students reported feeling most confident about performing periodontal treatment (mean 7.1 on a ten-point scale) and least confident about providing orthodontic care (mean 5.6). The fourth-year students reported feeling more confident on all the competencies than the third-year students. Their self-perceived competence in periodontal treatment and oral medicine significantly predicted the instructors' clinical evaluations. This study offered insights into determining if structured reflective learning with effective feedback helps to increase dental students' self-perceived level of clinical preparedness.

Study on the Interrater Reliability of an OSPE (Objective Structured Practical Examination) - Subject to the Evaluation Mode in the Phantom Course of Operative Dentistry

INTRODUCTION

The aim of the study presented here was to evaluate the reliability of an OSPE end-of-semester exam in the phantom course for operative dentistry in Frankfurt am Main taking into consideration different modes of evaluation (examiner's checklist versus instructor's manual) and number of examiners (three versus four).

METHODS

In an historic, monocentric, comparative study, two different methods of evaluation were examined in a real end-of-semester setting held in OSPE form (Group I: exclusive use of an examiner's checklist versus Group II: use of an examiner's checklist including an instructor's manual). For the analysis of interrater reliability, the generalisability theory was applied that contains a generalisation of the concept of internal consistency (Cronbach's alpha).

RESULTS

The results show that the exclusive use of the examiner's checklist led to higher interrater reliability values than the in-depth instructor's manual used in addition to the list.

CONCLUSION

In summary it can be said that the examiner's checklists used in the present study, without the instructor's manual, resulted in the highest interrater reliability in combination with three evaluators within the context of the completed OSPE.

Videotaped Feedback Method to Enhance Learning in Preclinical Operative Dentistry: An Experimental Study

The aim of this study was to investigate if a videotaped feedback method enhanced teaching and learning outcomes in a preclinical operative laboratory setting for novice learners. In 2013, 60 dental students at a dental school in India were randomly assigned to two groups: control (n=30) and experimental (n=30). The control group prepared a Class II tooth preparation for amalgam after receiving a video demonstration of the exercise. The experimental group received the same video demonstration as the control group, but they also participated in a discussion and analysis of the control groups' videotaped performance and then performed the same exercise. The self-evaluation scores (SS) and examiner evaluation scores (ES) of the two groups were compared using the unpaired t-test. The experimental group also used a five-point Likert scale to rate each item on the feedback form. The means of SS (13.65±2.43) and ES (14.75±1.97) of the experimental group were statistically higher than the means of SS (11.55±2.09) and ES (11.60±1.82) of the control group. Most students in the experimental group perceived that this technique enhanced their learning experience. Within the limits of this study, the videotaped feedback using both ideal and non-ideal examples enhanced the students' performance.

The Validity of Using E4D Compare's "% Comparison" to Assess Crown Preparations in Preclinical Dental Education

When a dental school is deciding which technology to introduce into a curriculum, it is important to identify the educational goals for the system. The authors' primary goal for the use of a computer-aided resource was to offer students another way to assess their performance, to enhance their learning, and to potentially decrease their learning curve in the preclinical environment prior to using the technique in clinical patient care. The aim of this study was to examine the validity of the "% Comparison" numbers derived from the E4D Compare software program. Three practical examinations were administered to a class of 82 students at one U.S. dental school over a six-week period. The grading of the practical examinations was performed with individual faculty members being responsible for evaluating specific aspects of each preparation. A digital image of each student's practical examination tooth was then obtained and compared to the digital image of an ideal preparation. The preparations were compared, and the "% Comparison" was recorded at five tolerance levels. Spearman's correlation coefficient (SCC) was used to measure the agreement in rankings between the faculty scores on practical exams 1-3 and the scores obtained using E4D Compare at the different tolerance levels. The SCC values for practical exams 2 and 3 were all between 0.2 and 0.4; for practical exam 1, the SCC values ranged from 0.47 to 0.56. There was no correlation between the faculty scores and the numbers given by the "% Comparison" of the software.

Correlation Between Students' Dental Admission Test Scores and Performance on a Dental School's Competency Exam

The aim of this study was to investigate whether there was a statistically significant positive correlation between dental students' Dental Admission Test (DAT) scores, particularly on the Perceptual Ability Test (PAT), and their performance on a dental school's competency exam. Scores from the written and clinical competency exam administered in the fall quarter of the fourth year of the curriculum at Midwestern University College of Dental Medicine-Arizona were compared to DAT scores of all 216 members of the graduating classes of 2012 and 2013. It was hypothesized that students who performed highly on one or more sections of the DAT would perform highly on the competency exam. Backward stepwise regression analyses were used to analyze the data. The results showed that the PAT scores were most strongly correlated with the competency exam scores and were a positive predictor for all three clinical sections of the exam (operative dentistry, periodontics, and endodontics). Positive predictors for the written portion of the exam were total DAT score for patient assessment and treatment planning and the DAT reading comprehension score for prosthodontics; there were no predictors for periodontics. The total variance explained by the results ranged from 4% to 15%. While statistically significant relationships were found between the students' PAT scores and clinical performance, DAT scores explained relatively little variance in the competency exam scores. According to these findings, neither the PAT nor any of the DAT components contributed to predicting these students' clinical performance.

Development and Application of a New Learning Object for Teaching Operative Dentistry Using Augmented Reality

Learning objects (LOs) associated with augmented reality have been used as attractive new technologic tools in the educational process. However, the acceptance of new LOs must be verified with the purpose of using these innovations in the learning process in general. The aim of this study was to develop a new LO and investigate the acceptance of gold onlay in teaching preparation design at a dental school in Brazil. Questionnaires were designed to assess, first, the users' computational ability and knowledge of computers (Q1) and, second, the users' acceptance of the new LO (Q2). For both questionnaires, the internal consistency index was calculated to determine whether the questions were measuring the same construct. The reliability of Q2 was measured with a retest procedure. The LO was tested by dental students (n=28), professors and postgraduate students in dentistry and prosthetics (n=30), and dentists participating in a continuing education or remedial course in dentistry and/or prosthetics (n=19). Analyses of internal consistency (Kappa coefficient and Cronbach's alpha) demonstrated a high degree of confidence in the questionnaires. Tests for simple linear regressions were conducted between the response variable (Q2) and the following explanative variables: the Q1 score, age, gender, and group. The results showed wide acceptance regardless of the subjects' computational ability (p=0.99; R2=0), gender (p=0.27; R2=1.6%), age (p=0.27; R2=0.1%), or group (p=0.53; R2=1.9%). The methodology used enabled the development of an LO with a high index of acceptance for all groups.