226
|
De Landro M, Ianniello J, Yon M, Wolf A, Quesson B, Schena E, Saccomandi P. Fiber Bragg Grating Sensors for Performance Evaluation of Fast Magnetic Resonance Thermometry on Synthetic Phantom. SENSORS 2020; 20:s20226468. [PMID: 33198326 PMCID: PMC7696215 DOI: 10.3390/s20226468] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/13/2020] [Revised: 11/07/2020] [Accepted: 11/09/2020] [Indexed: 12/12/2022]
Abstract
The increasing recognition of minimally invasive thermal treatment of tumors motivate the development of accurate thermometry approaches for guaranteeing the therapeutic efficacy and safety. Magnetic Resonance Thermometry Imaging (MRTI) is nowadays considered the gold-standard in thermometry for tumor thermal therapy, and assessment of its performances is required for clinical applications. This study evaluates the accuracy of fast MRTI on a synthetic phantom, using dense ultra-short Fiber Bragg Grating (FBG) array, as a reference. Fast MRTI is achieved with a multi-slice gradient-echo echo-planar imaging (GRE-EPI) sequence, allowing monitoring the temperature increase induced with a 980 nm laser source. The temperature distributions measured with 1 mm-spatial resolution with both FBGs and MRTI were compared. The root mean squared error (RMSE) value obtained by comparing temperature profiles showed a maximum error of 1.2 °C. The Bland-Altman analysis revealed a mean of difference of 0.1 °C and limits of agreement 1.5/−1.3 °C. FBG sensors allowed to extensively assess the performances of the GRE-EPI sequence, in addition to the information on the MRTI precision estimated by considering the signal-to-noise ratio of the images (0.4 °C). Overall, the results obtained for the GRE-EPI fully satisfy the accuracy (~2 °C) required for proper temperature monitoring during thermal therapies.
Collapse
|
227
|
Wakida NM, Cruz GMS, Pouladian P, Berns MW, Preece D. Fluid Shear Stress Enhances the Phagocytic Response of Astrocytes. Front Bioeng Biotechnol 2020; 8:596577. [PMID: 33262978 PMCID: PMC7686466 DOI: 10.3389/fbioe.2020.596577] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/19/2020] [Accepted: 10/15/2020] [Indexed: 12/22/2022] Open
Abstract
Astrocytes respond to brain injury at a cellular level by the process of reactive astrogliosis, and are able to adjust their response according to the severity of the insult. Included in the reactive response is the process of phagocytosis, where astrocytes clean up surrounding cellular debris from damaged cells. In this study, we observe the process of phagocytosis by primary cortical astrocytes in the presence of media flow across the apical surface of the cells. Both static and cells under flow conditions respond consistently via phagocytosis of laser-induced cellular debris. We found that astrocytes exposed to shear flow initiate phagocytosis at a consistently faster rate than cells observed under static conditions. Shear forces created by laminar flow were analyzed as well as the flow fields created around astrocyte cells. Results suggest astrocyte phagocytosis is a mechanosensitive response, thus revealing the potential to enhance astrocyte phagocytic cleanup of damaged nervous tissue.
Collapse
|
228
|
Temnov VV, Alekhin A, Samokhvalov A, Ivanov DS, Lomonosov A, Vavassori P, Modin E, Veiko VP. Nondestructive Femtosecond Laser Lithography of Ni Nanocavities by Controlled Thermo-Mechanical Spallation at the Nanoscale. NANO LETTERS 2020; 20:7912-7918. [PMID: 33074002 DOI: 10.1021/acs.nanolett.0c02574] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
We present a new approach to femtosecond direct laser writing lithography to pattern nanocavities in ferromagnetic thin films. To demonstrate the concept, we irradiated 300 nm thin nickel films by single intense femtosecond laser pulses through glass substrate. Using a fluence above the ablation threshold, the process is destructive, leading to the formation of an ablation crater. By progressively lowering the laser fluence, the formation of closed spallation cavities below the ablation threshold is achieved. Systematic studies by the electron and optical interferometric microscopies, supported by molecular dynamics simulations, enabled us to gain an understanding of the thermo-mechanical spallation mechanism at the solid-molten interface. We achieved the fabrication of periodic arrangements of closed spallation nanocavities. Due to their topology, closed magnetic nanocavities can support unique couplings of multiple excitations (magnetic, optical, acoustic, spintronic). Thereby, they offer a unique physics playground for emerging fields in magnetism, magneto-photonic, and magneto-acoustic applications.
Collapse
|
229
|
Ismail RA, Rawdhan HA, Ahmed DS. High-responsivity hybrid α-Ag 2S/Si photodetector prepared by pulsed laser ablation in liquid. BEILSTEIN JOURNAL OF NANOTECHNOLOGY 2020; 11:1596-1607. [PMID: 33134004 PMCID: PMC7590626 DOI: 10.3762/bjnano.11.142] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/02/2020] [Accepted: 09/25/2020] [Indexed: 05/05/2023]
Abstract
We report the synthesis of α-Ag2S nanoparticles (NPs) by one-step laser ablation of a silver target in aqueous solution of thiourea (Tu, CH4N2S) mixed with cationic cetyltrimethylammonium bromide (CTAB) as surfactant. The effect of the CTAB surfactant on the structural, morphological, optical, and elemental composition of Ag2S NPs was evaluated using X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and UV-vis spectroscopy. The optical absorption decreased and the optical energy gap of α-Ag2S increased from 1.5 to 2 eV after the CTAB surfactant was added to the Tu solution. XRD studies revealed that the synthesized Ag2S NPs were polycrystalline with a monoclinic structure and that crystallinity of the nanoparticles was improved after adding CTAB. Raman studies revealed the presence of peaks related to Ag-S bonds (Ag modes) and the longitudinal optical phonon 2LO mode. Scanning electron microscopy investigations confirmed the production of monodisperse Ag2S NPs when using the CTAB surfactant. The optoelectronic properties of α-Ag2S/p-Si photodetector, such as current-voltage characteristics and responsivity in the dark and under illumination, were also improved after using the CTAB surfactant. The responsivity of the photodetector increases from 0.64 to 1.85 A/W at 510 nm after adding CTAB. The energy band diagram of the α-Ag2S/p-Si photodetector under illumination was constructed. The fabricated photodetectors exhibited reasonable stability after three weeks of storage under ambient conditions with a responsivity of 70% of the initial value.
Collapse
|
230
|
Blumenstein A, Garcia ME, Rethfeld B, Simon P, Ihlemann J, Ivanov DS. Formation of Periodic Nanoridge Patterns by Ultrashort Single Pulse UV Laser Irradiation of Gold. NANOMATERIALS (BASEL, SWITZERLAND) 2020; 10:E1998. [PMID: 33050420 PMCID: PMC7600624 DOI: 10.3390/nano10101998] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 09/04/2020] [Revised: 09/30/2020] [Accepted: 10/03/2020] [Indexed: 12/11/2022]
Abstract
A direct comparison of simulation and experimental results of UV laser-induced surface nanostructuring of gold is presented. Theoretical simulations and experiments are performed on an identical spatial scale. The experimental results have been obtained by using a laser wavelength of 248 nm and a pulse length of 1.6 ps. A mask projection setup is applied to generate a spatially periodic intensity profile on a gold surface with a sinusoidal shape and periods of 270 nm, 350 nm, and 500 nm. The formation of structures at the surface upon single pulse irradiation is analyzed by scanning and transmission electron microscopy (SEM and TEM). For the simulations, a hybrid atomistic-continuum model capable of capturing the essential mechanisms responsible for the nanostructuring process is used to model the interaction of the laser pulse with the gold target and the subsequent time evolution of the system. The formation of narrow ridges composed of two colliding side walls is found in the simulation as well as in the experiment and the structures generated as a result of the material processing are categorized depending on the range of applied fluencies and periodicities.
Collapse
|
231
|
Gold Nanoparticle Formation via X-ray Radiolysis Investigated with Time-Resolved X-ray Liquidography. Int J Mol Sci 2020; 21:ijms21197125. [PMID: 32992497 PMCID: PMC7582564 DOI: 10.3390/ijms21197125] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/29/2020] [Revised: 09/23/2020] [Accepted: 09/24/2020] [Indexed: 11/17/2022] Open
Abstract
We report the generation of gold nanoparticles (AuNPs) from the aqueous solution of chloro(2,2',2″-terpyridine)gold(III) ion ([Au(tpy)Cl]2+) through X-ray radiolysis and optical excitation at a synchrotron. The original purpose of the experiment was to investigate the photoinduced structural changes of [Au(tpy)Cl]2+ upon 400 nm excitation using time-resolved X-ray liquidography (TRXL). Initially, the TRXL data did not show any signal that would suggest structural changes of the solute molecule, but after an induction time, the TRXL data started to show sharp peaks and valleys. In the early phase, AuNPs with two types of morphology, dendrites, and spheres, were formed by the reducing action of hydrated electrons generated by the X-ray radiolysis of water, thereby allowing the detection of TRXL data due to the laser-induced lattice expansion and relaxation of AuNPs. Along with the lattice expansion, the dendritic and spherical AuNPs were transformed into smaller, raspberry-shaped AuNPs of a relatively uniform size via ablation by the optical femtosecond laser pulse used for the TRXL experiment. Density functional theory calculations confirm that the reduction potential of the metal complex relative to the hydration potential of X-ray-generated electrons determines the facile AuNP formation observed for [Au(tpy)Cl]2+.
Collapse
|
232
|
Kang JY, Yenokyan G, Hwang BY, Chen M, Penn R, Mampre D, Sperling MR, Kamath V. Odor identification predicts postoperative seizure control following magnetic resonance-guided laser interstitial thermal therapy. Epilepsia 2020; 61:1949-1957. [PMID: 32944948 DOI: 10.1111/epi.16645] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/02/2020] [Revised: 07/21/2020] [Accepted: 07/21/2020] [Indexed: 11/28/2022]
Abstract
OBJECTIVE Olfactory dysfunction has been well documented in individuals with temporal lobe epilepsy, but its use in presurgical planning has yet to be examined. We assessed the role of preoperative odor identification in mesial onset seizure localization utilizing stereoelectroencephalography (S-EEG) and magnetic resonance-guided laser interstitial thermal therapy (MRgLiTT) outcome. METHODS We identified 30 patients who had typical seizures captured during S-EEG monitoring or MRgLiTT of mesial temporal structures (n = 17 S-EEG, n = 13 MRgLiTT); seizure onset zone was classified as unilateral mesial seizure onset, or multifocal with unilateral mesial onset and nonmesial onset. Odor identification ability was assessed using the Sniffin' Sticks Odor Identification Test (SSOIT). Patients also completed measures of confrontation naming and auditory-verbal learning/memory using the Boston Naming Test and Hopkins Verbal Learning Test-Revised, respectively. RESULTS Overall, patients with intractable focal epilepsy exhibited poor olfactory performance (median [M] = 10.4, interquartile range [IQR] = 9.4-11.8). Of 19 patients who underwent MRgLiTT, 10 patients (52.6%) were seizure-free at last follow-up (M = 13 months, IQR =10-18). Patients who were seizure-free after MRgLiTT (n = 10) had poorer odor identification scores (M = 9, IQR = 7-13) compared to patients with seizure reoccurrence (M = 13, IQR = 12.5-15). Odor identification score was inversely associated with seizure freedom, with odds ratio = 0.60 (95% confidence interval [CI] = 0.38-0.95, P = .03). Receiver operating characteristic analysis revealed that an SSOIT score of 12 was the ideal cutoff for predicting favorable seizure outcome (area under the curve = 0.84, 95% CI = 0.64-1.0). Sensitivity was 88.9% and specificity was 78.9%, with a likelihood ratio of 2.9 of seizure failure in patients who had an odor identification score ≥ 12. SIGNIFICANCE Interictal olfactory dysfunction is commonly seen in patients with intractable focal epilepsy. Odor identification is a novel, noninvasive presurgical biomarker to distinguish who may or may not benefit from MRgLiTT of mesial temporal structures.
Collapse
|
233
|
Barmina EV, Mukhametyanov BA, Uvarov OV, Vlasov II, Kudryavtsev OS, Kalachev YL, Skoulas E, Kourmoulakis G, Voronov VV, Stratakis E, Shafeev GA. Laser-Assisted Synthesis of Composite Nanoparticles of Perovskite BaTiO 3 in Aqueous Solutions and Their Optical Properties. MATERIALS 2020; 13:ma13184086. [PMID: 32937999 PMCID: PMC7560434 DOI: 10.3390/ma13184086] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/04/2020] [Revised: 08/27/2020] [Accepted: 09/10/2020] [Indexed: 11/16/2022]
Abstract
Experimental results are presented on laser-assisted synthesis of composite nanoparticles of perovskite BaTiO3 with gold nanoparticles using the technique of laser ablation in water and aqueous solution of hydrogen peroxide. Nanoparticles of BaTiO3 are generated by near IR laser radiation with pulse durations of 170 fs, 1 ps, and 200 ns. Nanoparticles of barium titanate BaTiO3 (BTO) have tetragonal structure for all used pulse durations. Two ways of synthesis are tested. In the first one a gold target is ablated in the colloidal solution of BaTiO3 nanoparticles. The second way consists of laser exposure of the mixture of colloidal solutions of nanoparticles of BaTiO3 and Au. Synthesized composite nanoparticles are characterized by optical spectroscopy, Raman spectroscopy, X-Ray diffractometry, and Transmission Electron Microscopy. Composite BaTiO3‑Au nanoparticles have the absorption band in the visible range of spectrum and demonstrate plasmonic luminescence.
Collapse
|
234
|
Piezoelectric Energy Harvester Based on LiNbO 3 Thin Films. MATERIALS 2020; 13:ma13183984. [PMID: 32916820 PMCID: PMC7558364 DOI: 10.3390/ma13183984] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/19/2020] [Revised: 09/04/2020] [Accepted: 09/07/2020] [Indexed: 11/17/2022]
Abstract
This paper reports the results of the influence of the energy of laser pulses during laser ablation on the morphology and electro-physical properties of LiNbO3 nanocrystalline films. It is found that increasing laser pulse energy from 180 to 220 mJ results in the concentration of charge carriers in LiNbO3 films decreasing from 8.6 × 1015 to 1.0 × 1013 cm-3, with the mobility of charge carriers increasing from 0.43 to 17.4 cm2/(V·s). In addition, experimental studies of sublayer material effects on the geometric parameters of carbon nanotubes (CNTs) are performed. It is found that the material of the lower electrode has a significant effect on the formation of CNTs. CNTs obtained at the same growth time on a sample with a Cr sublayer have a smaller diameter and a longer length compared to samples with a V sublayer. Based on the obtained results, the architecture of the energy nanogenerator is proposed. The current generated by the nanogenerator is 18 nA under mechanical stress of 600 nN. The obtained piezoelectric nanogenerator parameters are used to estimate the parameters of the hybrid-carbon-nanostructures-based piezoelectric energy converter. Obtained results are promising for the development of efficient energy converters for alternative energy devices based on lead-free ferroelectric films.
Collapse
|
235
|
Taneja N, Bersi MR, Rasmussen ML, Gama V, Merryman WD, Burnette DT. Inhibition of focal adhesion kinase increases myofibril viscosity in cardiac myocytes. Cytoskeleton (Hoboken) 2020; 77:342-350. [PMID: 32885903 DOI: 10.1002/cm.21632] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/22/2020] [Revised: 08/25/2020] [Accepted: 08/28/2020] [Indexed: 11/06/2022]
Abstract
The coordinated generation of mechanical forces by cardiac myocytes is required for proper heart function. Myofibrils are the functional contractile units of force production within individual cardiac myocytes. At the molecular level, myosin motors form cross-bridges with actin filaments and use ATP to convert chemical energy into mechanical forces. The energetic efficiency of the cross-bridge cycle is influenced by the viscous damping of myofibril contraction. The viscoelastic response of myofibrils is an emergent property of their individual mechanical components. Previous studies have implicated titin-actin interactions, cell-ECM adhesion, and microtubules as regulators of the viscoelastic response of myofibrils. Here we probed the viscoelastic response of myofibrils using laser-assisted dissection. As a proof-of-concept, we found actomyosin contractility was required to endow myofibrils with their viscoelastic response, with blebbistatin treatment resulting in decreased myofibril tension and viscous damping. Focal adhesion kinase (FAK) is a key regulator of cell-ECM adhesion, microtubule stability, and myofibril assembly. We found inhibition of FAK signaling altered the viscoelastic properties of myofibrils. Specifically, inhibition of FAK resulted in increased viscous damping of myofibril retraction following laser ablation. This damping was not associated with acute changes in the electrophysiological properties of cardiac myocytes. These results implicate FAK as a regulator of mechanical properties of myofibrils.
Collapse
|
236
|
Understanding of the Mechanism for Laser Ablation-Assisted Patterning of Graphene/ITO Double Layers: Role of Effective Thermal Energy Transfer. MICROMACHINES 2020; 11:mi11090821. [PMID: 32872492 PMCID: PMC7570164 DOI: 10.3390/mi11090821] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/03/2020] [Revised: 08/27/2020] [Accepted: 08/28/2020] [Indexed: 12/11/2022]
Abstract
Demand for the fabrication of high-performance, transparent electronic devices with improved electronic and mechanical properties is significantly increasing for various applications. In this context, it is essential to develop highly transparent and conductive electrodes for the realization of such devices. To this end, in this work, a chemical vapor deposition (CVD)-grown graphene was transferred to both glass and polyethylene terephthalate (PET) substrates that had been pre-coated with an indium tin oxide (ITO) layer and then subsequently patterned by using a laser-ablation method for a low-cost, simple, and high-throughput process. A comparison of the results of the laser ablation of such a graphene/ITO double layer with those of the ITO single-layered films reveals that a larger amount of effective thermal energy of the laser used is transferred in the lateral direction along the graphene upper layer in the graphene/ITO double-layered structure, attributable to the high thermal conductivity of graphene. The transferred thermal energy is expected to melt and evaporate the lower ITO layer at a relatively lower threshold energy of laser ablation. The transient analysis of the temperature profiles indicates that the graphene layers can act as both an effective thermal diffuser and converter for the planar heat transfer. Raman spectroscopy was used to investigate the graphite peak on the ITO layer where the graphene upper layer was selectively removed because of the incomplete heating and removal process for the ITO layer by the laterally transferred effective thermal energy of the laser beam. Our approach could have broad implications for designing highly transparent and conductive electrodes as well as a new way of nanoscale patterning for other optoelectronic-device applications using laser-ablation methods.
Collapse
|
237
|
Wakida NM, Gomez-Godinez V, Li H, Nguyen J, Kim EK, Dynes JL, Othy S, Lau AL, Ding P, Shi L, Carmona C, Thompson LM, Cahalan MD, Berns MW. Calcium Dynamics in Astrocytes During Cell Injury. Front Bioeng Biotechnol 2020; 8:912. [PMID: 32984268 PMCID: PMC7481337 DOI: 10.3389/fbioe.2020.00912] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/02/2020] [Accepted: 07/15/2020] [Indexed: 12/31/2022] Open
Abstract
The changes in intracellular calcium concentration ([Ca2+]) following laser-induced cell injury in nearby cells were studied in primary mouse astrocytes selectively expressing the Ca2+ sensitive GFAP-Cre Salsa6f fluorescent tandem protein, in an Ast1 astrocyte cell line, and in primary mouse astrocytes loaded with Fluo4. Astrocytes in these three systems exhibit distinct changes in [Ca2+] following induced death of nearby cells. Changes in [Ca2+] appear to result from release of Ca2+ from intracellular organelles, as opposed to influx from the external medium. Salsa6f expressing astrocytes displayed dynamic Ca2+ changes throughout the phagocytic response, including lamellae protrusion, cytosolic signaling during vesicle formation, vesicle maturation, and vesicle tract formation. Our results demonstrate local changes in [Ca2+] are involved in the process of phagocytosis in astrocytes responding to cell corpses and/or debris.
Collapse
|
238
|
Motwani M. Biomechanical Changes to the Cornea from LASIK Flap Creation Resulting in Inaccurate Ablations and Suboptimal Refractive Outcomes with Topographic-Guided Ablation. Clin Ophthalmol 2020; 14:2319-2327. [PMID: 32848360 PMCID: PMC7429235 DOI: 10.2147/opth.s263896] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/21/2020] [Accepted: 07/23/2020] [Indexed: 01/10/2023] Open
Abstract
Purpose This study documents a biomechanical corneal change related to corneal flap creation in certain patients leading to an irregular ablation pattern and an inaccurate refractive outcome. Methods This retrospective study included consecutive eyes treated with primary LASIK Contoura using the LYRA Protocol. All LASIK procedures were performed on the WaveLight EX500 excimer laser. Flaps were created with either the Alcon WaveLight FS200 femtosecond laser or the Moria M2 microkeratome. Eyes that were off by greater than or equal to 0.50 diopters (D) sphere or cylinder from the targeted goal within 3 months after surgery were identified. Topographical, higher order aberration, and epithelial maps were created. Of these eyes, approximately 10% of eyes were found to have undergone a biomechanical change upon flap creation that led to an inaccurate outcome. Results Six representative cases are presented that demonstrate the biomechanical change, outcomes, and treatment. All patients demonstrated an elliptical, irregular ablation pattern on post-operative topography, lateralized the thinnest point of the cornea relative to the corneal apex on Pentacam pachymetry maps, and irregular corneal epithelial thickening at the periphery of the elliptical ablation. Conclusion A biomechanical change during flap creation can occur in certain types of corneas during LASIK flap creation and subsequent treatment with topographic-guided ablation leading to an irregular ablation and suboptimal refractive outcomes.
Collapse
|
239
|
Ortner VK, Holmes J, Haedersdal M, Philipsen PA. Morphometric Optical Imaging of Microporated Nail Tissue: An Investigation of Intermethod Agreement, Reliability, and Technical Limitations. Lasers Surg Med 2020; 53:838-848. [PMID: 32770696 DOI: 10.1002/lsm.23304] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/12/2020] [Revised: 06/17/2020] [Accepted: 07/20/2020] [Indexed: 01/07/2023]
Abstract
BACKGROUND AND OBJECTIVES While optical imaging is a useful technique to quantitate morphological differences and treatment effects, comparative investigations of the various techniques are lacking. This study aimed at evaluating intermethod agreement, reliability, and technical limitations of wide-field microscopy (WFM), reflectance confocal microscopy (RCM), and optical coherence tomography (OCT) for morphometry by assessing fractionally ablated nail tissue. STUDY DESIGN/MATERIALS AND METHODS Fifty healthy nail clippings were processed with a fractionated CO2 -laser (20 mJ/microbeam, density 15%), measured with calipers, and imaged using WFM, OCT, and RCM. Images were assessed for nail plate thickness, micropore dimensions, degree of poration, and artifacts. Repeated measurements (2-5) were taken to evaluate method repeatability using Cronbach's α and coefficients of variation (CoV), and estimate the intermethod correlation through linear correlation assessment (Pearson correlation coefficient [PCC]), ranked correlation (Kendall's tau; tau-c), and intraclass correlation (Shrout-Fleiss reliability coefficient; ICC). RESULTS The repeatability varied substantially between methods and target measurements. The level of intermethod agreement for thickness measurements performed with calipers, WFM, and OCT was high (tau-c ≥ 0.7; ICC ≥ 0.8; PCC ≥ 0.9). RCM could only image 28 out of 50 samples due to its limited penetration depth. OCT demonstrated the highest repeatability of all imaging techniques (CoV 4-7%) and nail thickness showed the highest measurement reliability (α = 0.92). Micropore dimensions correlated strongest between OCT and RCM (tau-c/ICC/PCC ≥ 0.5). All modalities were prone to artifacts, which may have adversely affected measurement variation and intermethod agreement. CONCLUSION Intermethod agreement and reliability appear to be highly dependent on the specific modality and target measurement. To reap the benefits of each technique while mitigating their limitations, an integrated approach to optical imaging is recommended. Lasers Surg. Med. © 2020 Wiley Periodicals LLC.
Collapse
|
240
|
Shalini S, Frank DS, Aldoukhi AH, Majdalany SE, Roberts WW, Ghani KR, Matzger AJ. Assessing the Role of Light Absorption in Laser Lithotripsy by Isotopic Substitution of Kidney Stone Materials. ACS Biomater Sci Eng 2020; 6:5274-5280. [PMID: 33455276 DOI: 10.1021/acsbiomaterials.0c00790] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
Understanding the chemical characteristics of kidney stones and how the stone composition affects their fragmentation is key to improving clinical laser lithotripsy. During laser lithotripsy, two mechanisms may be responsible for stone fragmentation: a photothermal mechanism and/or microexplosion mechanism. Herein, we carry out an isotopic substitution of crystal H2O with D2O in calcium oxalate monohydrate and struvite stones to alter their optical properties to study the relationship between the absorption of the stones, at the wavelength of the Ho:YAG (2.12 μm) laser, and the fragmentation behavior. Changing the absorption of the stones at 2.12 μm changes the extent of fragmentation, whereas changing the absorption of the bulk medium has a negligible effect on fragmentation, leading to the conclusion that kidney stone ablation is dominated by a photothermal mechanism.
Collapse
|
241
|
Fabrication of Periodic Nanostructures on Silicon Suboxide Films with Plasmonic Near-Field Ablation Induced by Low-Fluence Femtosecond Laser Pulses. NANOMATERIALS 2020; 10:nano10081495. [PMID: 32751542 PMCID: PMC7466530 DOI: 10.3390/nano10081495] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 06/30/2020] [Revised: 07/14/2020] [Accepted: 07/29/2020] [Indexed: 02/02/2023]
Abstract
Silicon suboxide (SiOx, x ≈ 1) is a substoichiometric silicon oxide with a large refractive index and optical absorption coefficient that oxidizes to silica (SiO2) by annealing in air at ~1000 °C. We demonstrate that nanostructures with a groove period of 200-330 nm can be formed in air on a silicon suboxide film with 800 nm, 100 fs, and 10 Hz laser pulses at a fluence an order of magnitude lower than that needed for glass materials such as fused silica and borosilicate glass. Experimental results show that high-density electrons can be produced with low-fluence femtosecond laser pulses, and plasmonic near-fields are subsequently excited to create nanostructures on the surface because silicon suboxide has a larger optical absorption coefficient than glass. Calculations using a model target reproduce the observed groove periods well and explain the mechanism of the nanostructure formation.
Collapse
|
242
|
Advances in Laser Ablation Synthesized Silicon-Based Nanomaterials for the Prevention of Bacterial Infection. NANOMATERIALS 2020; 10:nano10081443. [PMID: 32722023 PMCID: PMC7466518 DOI: 10.3390/nano10081443] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 07/05/2020] [Revised: 07/18/2020] [Accepted: 07/22/2020] [Indexed: 12/30/2022]
Abstract
Nanomaterials have unique properties and characteristics derived from their shape and small size that are not present in bulk materials. If size and shape are decisive, the synthesis method used, which determines the above parameters, is equally important. Among the different nanomaterial’s synthesis methods, we can find chemical methods (microemulsion, sol-gel, hydrothermal treatments, etc.), physical methods (evaporation-condensation, laser treatment, etc.) and biosynthesis. Among all of them, the use of laser ablation that allows obtaining non-toxic nanomaterials (absence of foreign compounds) with a controlled 3D size, has emerged in recent years as a simple and versatile alternative for the synthesis of a wide variety of nanomaterials with numerous applications. This manuscript reviews the latest advances in the use of laser ablation for the synthesis of silicon-based nanomaterials, highlighting its usefulness in the prevention of bacterial infection.
Collapse
|
243
|
Karam B, Moussally M, Nassar H, Ataya K, Jaafar R, Haddad F. Long-term results of endovenous laser ablation of saphenous vein reflux: Up to nine years of follow-up. Phlebology 2020; 36:43-47. [PMID: 32660372 DOI: 10.1177/0268355520939744] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/15/2022]
Abstract
INTRODUCTION Endovenous laser ablation (EVLA) has become the gold standard for the treatment of saphenous vein reflux. We report the long-term clinical and ultrasound results of EVLA. METHODS This study is a retrospective review of patients who underwent EVLA of saphenous vein over four years. Clinical results were assessed using venous clinical severity score (VCSS), and ultrasound results were classified according to Bush classification. RESULTS Over a median follow-up time of 4.4 years, 168 EVLA-treated patients showed a drop in VCSS from 4.38 to 1.39. Ultrasound results of 140 treated great saphenous veins showed that 64% had one or more cause of recurrence. The presence of neovascularization correlated well with the lack of improvement of VCSS. CONCLUSION EVLA resulted in drop in VCSS from 4.38 to 1.39. Among 140 treated great saphenous veins, reflux in the anterior accessory saphenous vein was the primary cause (23.5%) of recurrence.
Collapse
|
244
|
Removal of Composite Restoration from the Root Surface in the Cervical Region Using Er: YAG Laser and Drill-In Vitro Study. MATERIALS 2020; 13:ma13133027. [PMID: 32645864 PMCID: PMC7372447 DOI: 10.3390/ma13133027] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/20/2020] [Revised: 06/24/2020] [Accepted: 07/03/2020] [Indexed: 12/13/2022]
Abstract
Background: Recently, the defects of the tooth surface in the cervical region are often restored using composite filling materials. It should meet the needs of the patients regarding esthetics and material stability. The aim of the study was to analyze the tooth root surface at the cervical region after the removal of the composite filling material by means of the Erbium-doped Yttrium Aluminium Garnet (Er: YAG) laser or drill using the scanning electron microscopy (SEM) and fluorescence microscopy. Materials and Methods: For the purposes of this study, 14 premolar teeth (n = 14) were removed due to orthodontic reasons. The rectangular shape cavities with 3 mm in width and 1.5 mm in height were prepared with a 0.8 mm bur on high-speed contra-angle in the tooth surface just below cemento-enamel junction (CEJ) and filled with the composite material. The composite material was removed with the Er: YAG laser at a power of 3.4 W, energy 170 mJ, frequency 20 Hz, pulse duration 300 μs, tip diameter 0.8 mm, air/fluid cooling 3 mL/s, and time of irradiation: 6 sec, at a distance from teeth of 2 mm (G1 group, n = 7) or a high-speed contra-angle bur (G2 group, n = 7). After the removal of composite material, the surfaces of teeth were examined using the scanning electron microscopy (SEM) and fluorescence microscopy. Results: The Er: YAG irradiation allowed to remove completely the composite material from the tooth cavity. The study confirmed, that the ends of collagen fibers were only partially denatured after the Er: YAG laser application. Conclusion: It has been proved that using the Er: YAG laser is an effective and safe method of composite removal for the dentin surface.
Collapse
|
245
|
Nguendon Kenhagho H, Canbaz F, Gomez Alvarez-Arenas TE, Guzman R, Cattin P, Zam A. Machine Learning-Based Optoacoustic Tissue Classification Method for Laser Osteotomes Using an Air-Coupled Transducer. Lasers Surg Med 2020; 53:377-389. [PMID: 32614077 DOI: 10.1002/lsm.23290] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/23/2020] [Revised: 04/28/2020] [Accepted: 06/14/2020] [Indexed: 11/07/2022]
Abstract
BACKGROUND AND OBJECTIVES Using lasers instead of mechanical tools for bone cutting holds many advantages, including functional cuts, contactless interaction, and faster wound healing. To fully exploit the benefits of lasers over conventional mechanical tools, a real-time feedback to classify tissue is proposed. STUDY DESIGN/MATERIALS AND METHODS In this paper, we simultaneously classified five tissue types-hard and soft bone, muscle, fat, and skin from five proximal and distal fresh porcine femurs-based on the laser-induced acoustic shock waves (ASWs) generated. For laser ablation, a nanosecond frequency-doubled Nd:YAG laser source at 532 nm and a microsecond Er:YAG laser source at 2940 nm were used to create 10 craters on the surface of each proximal and distal femur. Depending on the application, the Nd:YAG or Er:YAG can be used for bone cutting. For ASW recording, an air-coupled transducer was placed 5 cm away from the ablated spot. For tissue classification, we analyzed the measured acoustics by looking at the amplitude-frequency band of 0.11-0.27 and 0.27-0.53 MHz, which provided the least average classification error for Er:YAG and Nd:YAG, respectively. For data reduction, we used the amplitude-frequency band as an input of the principal component analysis (PCA). On the basis of PCA scores, we compared the performance of the artificial neural network (ANN), the quadratic- and Gaussian-support vector machine (SVM) to classify tissue types. A set of 14,400 data points, measured from 10 craters in four proximal and distal femurs, was used as training data, while a set of 3,600 data points from 10 craters in the remaining proximal and distal femur was considered as testing data, for each laser. RESULTS The ANN performed best for both lasers, with an average classification error for all tissues of 5.01 ± 5.06% and 9.12 ± 3.39%, using the Nd:YAG and Er:YAG lasers, respectively. Then, the Gaussian-SVM performed better than the quadratic SVM during the cutting with both lasers. The Gaussian-SVM yielded average classification errors of 15.17 ± 13.12% and 16.85 ± 7.59%, using the Nd:YAG and Er:YAG lasers, respectively. The worst performance was achieved with the quadratic-SVM with a classification error of 50.34 ± 35.04% and 69.96 ± 25.49%, using the Nd:YAG and Er:YAG lasers. CONCLUSION We foresee using the ANN to differentiate tissues in real-time during laser osteotomy. Lasers Surg. Med. © 2020 Wiley Periodicals LLC.
Collapse
|
246
|
Faklaris I, Bouropoulos N, Vainos NA. Sialolithiasis: Application parameters for an optimal laser therapy. JOURNAL OF BIOPHOTONICS 2020; 13:e202000044. [PMID: 32277604 DOI: 10.1002/jbio.202000044] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/12/2020] [Revised: 03/18/2020] [Accepted: 03/25/2020] [Indexed: 06/11/2023]
Abstract
In-vitro experimental parametric studies of laser ablation using natural sialoliths and artificial stones have been performed toward an efficient laser treatment of sialolithiasis. Surface microstructure and water adsorption become critical for coupling high power pulsed Ho:YAG laser radiation (λ = 2080 nm, τ ∼250 μsec), inducing ablative interactions and stone fragmentation. Results reveal a generic trend, with single pulse laser energy density threshold for sialolith ablative erosion at ∼200 J cm-2 (corresponding to intensity ∼800 kW cm-2 ) and fragmentation rates reaching ∼1 mm/pulse at ∼2400 J cm-2 . This process shows no saturation, suggesting that very high energy density irradiation at low pulse repetition rate is an efficient approach. Such operation facilitates rapid cooling and minimal thermal loading of the oral and maxillofacial area, thus causing negligible adverse effects. The method is expected to contribute to the establishment of an easy and optimal therapeutic protocol for sialolithiasis pathology.
Collapse
|
247
|
Basso L, Sacco M, Bazzanella N, Cazzanelli M, Barge A, Orlandi M, Bifone A, Miotello A. Laser-Synthesis of NV-Centers-Enriched Nanodiamonds: Effect of Different Nitrogen Sources. MICROMACHINES 2020; 11:mi11060579. [PMID: 32527055 PMCID: PMC7344492 DOI: 10.3390/mi11060579] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/27/2020] [Revised: 06/06/2020] [Accepted: 06/08/2020] [Indexed: 01/15/2023]
Abstract
Due to the large number of possible applications in quantum technology fields—especially regarding quantum sensing—of nitrogen-vacancy (NV) centers in nanodiamonds (NDs), research on a cheap, scalable and effective NDs synthesis technique has acquired an increasing interest. Standard production methods, such as detonation and grinding, require multistep post-synthesis processes and do not allow precise control in the size and fluorescence intensity of NDs. For this reason, a different approach consisting of pulsed laser ablation of carbon precursors has recently been proposed. In this work, we demonstrate the synthesis of NV-fluorescent NDs through pulsed laser ablation of an N-doped graphite target. The obtained NDs are fully characterized in the morphological and optical properties, in particular with optically detected magnetic resonance spectroscopy to unequivocally prove the NV origin of the NDs photoluminescence. Moreover, to compare the different fluorescent NDs laser-ablation-based synthesis techniques recently developed, we report an analysis of the effect of the medium in which laser ablation of graphite is performed. Along with it, thermodynamic aspects of the physical processes occurring during laser irradiation are analyzed. Finally, we show that the use of properly N-doped graphite as a target for laser ablation can lead to precise control in the number of NV centers in the produced NDs.
Collapse
|
248
|
Komlenok MS, Pivovarov PA, Dezhkina MA, Rybin MG, Savin SS, Obraztsova ED, Konov VI. Printing of Crumpled CVD Graphene via Blister-Based Laser-Induced Forward Transfer. NANOMATERIALS (BASEL, SWITZERLAND) 2020; 10:E1103. [PMID: 32498396 PMCID: PMC7353250 DOI: 10.3390/nano10061103] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/04/2020] [Revised: 05/21/2020] [Accepted: 05/30/2020] [Indexed: 11/30/2022]
Abstract
The patterning and transfer of a two-dimensional graphene film without damaging its original structure is an urgent and difficult task. For this purpose, we propose the use of the blister-based laser-induced forward transfer (BB-LIFT), which has proven itself in the transfer of such delicate materials. The ease of implementation of laser techniques reduces the number of intermediate manipulations with a graphene film, increasing its safety. The work demonstrates the promise of BB-LIFT of single-layer graphene from a metal surface to a SiO2/Si substrate. The effect of the parameters of this method on the structure of transferred graphene islands is investigated. The relevance of reducing the distance between irradiating and receiving substrates for the transfer of free-lying graphene is demonstrated. The reasons for the damage to the integrity of the carbon film observed in the experiments are discussed. The preservation of the original crystal structure of transferred graphene is confirmed by Raman spectroscopy.
Collapse
|
249
|
Cesareo R, Pacella CM, Pasqualini V, Campagna G, Iozzino M, Gallo A, Lauria Pantano A, Cianni R, Pedone C, Pozzilli P, Taffon C, Crescenzi A, Manfrini S, Palermo A. Laser Ablation Versus Radiofrequency Ablation for Benign Non-Functioning Thyroid Nodules: Six-Month Results of a Randomized, Parallel, Open-Label, Trial (LARA Trial). Thyroid 2020; 30:847-856. [PMID: 32056501 DOI: 10.1089/thy.2019.0660] [Citation(s) in RCA: 41] [Impact Index Per Article: 10.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 12/20/2022]
Abstract
Background: No direct prospective studies comparing laser ablation (LA) and radiofrequency ablation (RFA) for debulking benign non-functioning thyroid nodules (BNTNs) exist. We aimed at comparing the efficacy and safety of both techniques in patients with solid or predominantly solid BNTN. Methods: This six-month, single-use, randomized, open-label, parallel trial compared the following primary endpoints between the RFA and LA groups six months after treatment: (i) nodule volume reduction expressed as a percentage of nodule volume at baseline; (ii) proportion of nodules with more than 50% reduction (successful rate). We enrolled subjects with a solitary BNTN or dominant nodule characterized by pressure symptoms/cosmetic problems or patients without symptoms who experienced a volume increase >20% in one year. Nodules underwent core needle biopsy for diagnosis. Patients were randomly assigned (1:1) to receive LA or RFA. Safety was assessed in all randomly assigned participants. Results: Sixty patients were randomly assigned to receive either RFA or LA (1:1) between January 2016 and November 2018. Both groups were similar in basal nodule volume, thyroid function, histology, symptoms/cosmetic score, and procedure time. At six months, the nodule volume reduction was 64.3% (95% confidence interval, CI 57.5-71.2) in the RFA group and 53.2% ([CI 47.2-95.2]; p = 0.02) in the LA group. This effect was also confirmed in the linear regression model adjusted for age, baseline volume, and proportion of cellular component (LA vs. RFA percent change Delta = -12.8, p = 0.02). No significant difference was observed in success rate six months after treatment (RFA vs. LA: 86.7% vs. 66.7%, p = 0.13) or in thyrotropin level between the groups. Although improved, no significant difference was observed between RFA and LA for compressive symptoms (RFA: 2.13 vs. 3.9, p < 0 · 001; LA: 2.4 vs. 3.87, p < 0.001) and cosmetic score (RFA: 1.65 vs. 2.2, p < 0.001; LA: 1.85 vs. 2.2, p < 0.001). The adverse event rates (local pain, dysphonia, thyrotoxicosis, fever, hematoma) were 37% (n = 11) and 43% (n = 13) for RFA and LA, respectively, with no requirement for hospitalization. Conclusion: Although the success rate was similar in the RFA and LA groups, RFA achieved a significantly larger nodule volume reduction at six months.
Collapse
|
250
|
Mauri G, Gennaro N, Lee MK, Baek JH. Laser and radiofrequency ablations for benign and malignant thyroid tumors. Int J Hyperthermia 2020; 36:13-20. [PMID: 31537159 DOI: 10.1080/02656736.2019.1622795] [Citation(s) in RCA: 37] [Impact Index Per Article: 9.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/27/2022] Open
Abstract
A growing body of evidence is being published regarding the safety and efficacy of minimally invasive image-guided ablation techniques. While clinical applications of these techniques are increasing, international societies have started to publish treatment guidelines and to make efforts to standardize both terminology and reporting criteria for image-guided thyroid ablations. Laser ablation and radiofrequency ablation (RFA) are among the most common ablation techniques either for benign and malignant thyroid nodules. Unlike laser ablation and RFA in the treatment of benign thyroid nodules, where safety and efficacy have been widely demonstrated, evidence regarding local tumor control of thyroid malignancies is still limited. However, preliminary results are encouraging and image-guided thermal ablation techniques can be considered a valid alternative to surgery for the treatment of benign thyroid nodules and recurrent thyroid cancers. This review evaluates the basic concept of RFA and laser ablations, their techniques, clinical outcomes, and complications based on the suggestions of several society guidelines. Multidisciplinary collaboration remains critical to identify patients which may benefit from minimally invasive image-guided thermal ablations, especially if surgery or radioiodine therapy are not feasible options.
Collapse
|