Investigation of 20 non-HLA (human leucocyte antigen) psoriasis susceptibility loci in Chinese patients with psoriatic arthritis and psoriasis vulgaris

BACKGROUND

Recently, a number of non-HLA (human leucocyte antigen) psoriasis genetic susceptibility loci have been identified through genome-wide association studies, but data on their association with psoriatic arthritis (PsA) are lacking.

OBJECTIVES

To investigate recently identified psoriasis susceptibility loci in a cohort of Chinese patients with PsA, psoriasis vulgaris (PsV) and healthy controls.

METHODS

Twenty single-nucleotide polymorphisms (SNPs) from 20 loci were selected for genotyping in 379 patients with PsA, 595 patients with PsV and 1181 healthy controls using the MassARRAY platform (Sequenom, San Diego, CA, U.S.A.). Data handling, quality control and association were performed using PLINK software, v. 1.07. The Cochran-Armitage trend test was used to test the genotype-phenotype association.

RESULTS

PsA showed a significant association with markers at TNIP1 (rs17728338, P = 2.20 × 10(-8)), IL28RA (rs4649203, P = 5.04 × 10(-6)), IL12B (rs2082412, P = 3.82 × 10(-5)), ERAP1 (rs27524, P = 1.25 × 10(-3)), PTTG1 (rs2431697, P = 1.22 × 10(-3)) and GJB2 (rs3751385, P = 1.48 × 10(-3)) when compared with the control group. In PsV a significant association was found for IL28RA (rs4649203, P = 9.53 × 10(-7)), TNIP1 (rs17728338, P = 1.21 × 10(-4)) and ERAP1 (rs27524, P = 1.17 × 10(-3)). The allele frequencies were not statistically different between PsA and PsV except for SNPs at IL12B and ZNF816A with a nominal P-value of 0.04 and 0·01, respectively.

CONCLUSIONS

This study provides evidence for the involvement of ERAP1, IL28RA, GJB2 and PTTG1 loci in PsA susceptibility and confirmed the previously reported association with PsA and PsV. These results support the hypothesis that genetic aetiology of psoriasis is the same in both PsA and PsV and also support the higher genetic component of PsA than PsV.

The Effect of Polymer Additives on Surface Quality of Microcellular Injection Molded Parts

Microcellular injection molding is an emerging process for producing foamed plastic parts with complex geometries. It has many advantages including material, energy, and cost savings as well as greater design freedom and dimensional stability. In spite of these advantages, this technique has been limited to non-aesthetic applications by its propensity to create parts with swirling patterns on the surface, a common characteristic of all foamed parts produced. This paper describes a novel method for achieving microcellular injection molded parts free of surface defects. By controlling the amount of supercritical fluid (SCF) and adding the proper type of polymer additives into the polymer, the onset and rate of cell nucleation were properly controlled so that swirl-free microcellular injection molded parts could be successfully molded. This paper presents the theoretical background and experimental results that demonstrate the effect of polymer additives on the surface quality of microcellular injection molded parts.

Study of Microcellular Injection Molding with Expandable Thermoplastic Microsphere

Injection molding with expandable thermoplastic microspheres (ETM) containing blowing chemicals is capable of fabricating lightweight, dimensionally stable plastic parts while using less material. This paper presents the study of microcellular injection molding of low density polyethylene (LDPE), polypropylene (PP), and polystyrene (PS) parts with various ETM contents. It was found that the molded parts exhibit relatively better surface quality than conventional foamed parts. The microcellular morphology and cell density of the fractured cross-sectional surfaces were characterized using a scanning electron microscope (SEM). As reflected by the testing results, the cell microstructure – such as cell size, cell density, and a layered structure with a foamed core sandwiched by skin layers – play an important role in the weight reduction, surface quality, and mechanical properties. A smaller cell diameter and a thicker skin layer help to improve the surface quality and tensile properties of the injection molded parts with ETM. Finally, an appropriate ETM content has a positive effect on cell microstructure and weight reduction, whereas too high a concentration of microspheres adversely affects the tensile properties and surface quality.

XBP1 promoter polymorphism modulates platinum-based chemotherapy gastrointestinal toxicity for advanced non-small cell lung cancer patients

BACKGROUND

The X-box binding protein 1 (XBP1) is a critical transcription factor in the endoplasmic reticulum stress response, which is essential for the maintenance of cellular homeostasis. Here, we investigated whether the regulatory variant rs2269577 of the XBP1 gene influences clinical outcome in advanced non-small cell lung cancer (NSCLC) patients undergoing platinum-based chemotherapy.

PATIENTS AND METHODS

We recruited 663 Chinese patients with advanced NSCLC treated with platinum-based regimens and assessed the association between rs2269577 and clinical outcome. Subsequent functional analyses, including real-time quantitative PCR and dual-luciferase assays, were performed to explore possible molecular mechanisms.

RESULTS

The G/G genotype of rs2269577 was significantly associated with severe gastrointestinal toxicity compared with the homozygous C/C genotype (P=0.012, odds ratio=2.755), particularly in the female, performance status 0-1, and adenocarcinoma subgroups. No significant relevance was found between rs2269577 and treatment efficacy. In gastric epithelial cells, in vitro molecular analyses demonstrated that XBP1 mRNA expression levels decreased after treatment with cisplatin and the G allele of rs2269577 weakened the transcriptional activity of the XBP1 promoter.

CONCLUSION

This is the first study to evaluate the effect of XBP1 polymorphism on severe chemotherapy-related adverse outcomes in platinum-treated advanced NSCLC patients using both pharmacogenomics and functional molecular analyses.

Validated HPLC Method for the Determination of Paclitaxel-related Substances in an Intravenous Emulsion Loaded with a Paclitaxel-Cholesterol Complex

A high-performance liquid chromatography method was developed for the determination of related substances in an intravenous emulsion loaded with a paclitaxel-cholesterol complex. The separation was achieved using Agilent Eclipse XDB-C18 column (150×4.6 mm, 3.5 μm), which was kept at 40°. The gradient mobile phase consisted of acetonitrile and water with a flow rate of 1.2 ml/min. The ultraviolet detection wavelength was set at 227 nm. The preparation of the sample solution began with the addition of anhydrous sodium sulphate to break the emulsion. Then, methanol and ethyl ether were added to pick up the drug and remove the accessories of the emulsion by extraction and centrifugation. Finally, paclitaxel was enriched by a nitrogen blow method and resolved with a mixture of methanol:glacial acetic acid (200:1). The method was proven to be selective, sensitive, robust, linear, repeatable, accurate and suitable for the determination of paclitaxel-related substances in the emulsion formulations, and the major degradation products in the potential pharmaceutical product were 7-epipaclitaxel and 10-deacetylpaclitaxel.

Prognostic significance of apical lymph node metastasis in patients with node-positive rectal cancer

AIM

The aim of this study was to assess the effect of apical lymph node (APN) metastasis in predicting prognosis in curatively treated node-positive rectal cancer. We also investigated the relationship between APN metastasis and the total number of metastatic lymph nodes.

METHOD

A retrospective study was performed of 510 curatively treated patients with node-positive rectal cancer. Clinicopathological variables, including APN status, were assessed in univariate and multivariate analyses. The prognostic significance of APN status in predicting patient outcomes and the relationship between APN status and American Joint Committee on Cancer (AJCC) N stage were analysed.

RESULTS

At a median follow up of 47 months, the 5-year local recurrence (LR) rate, the disease-free survival (DFS) rate and the overall survival (OS) rate were 18.3%, 55.5% and 58.8%, respectively. The 5-year OS rate was 69.6% for patients with no metastasis in APNs (APN(-)) and 40.8% for patients with metastasis in APNs (APN(+)). DFS and OS for patients with undetermined APN status were between those for APN(-) and APN(+). Subgroup analysis gave a 5-year OS rate of 48.7% in Stage N1 patients with APN(+) and 58.8% for Stage N2 patients with APN(-) (P = 0.0004).

CONCLUSION

APN metastasis is an important prognostic factor in node-positive rectal cancer, which provides additional survival-related prognostic classification irrespective of N stage. As the APN is usually outside the radiation field, in the era of multidisciplinary treatment its assessment should be incorporated into prognostic evaluation of rectal cancer.

PIKE mediates EGFR proliferative signaling in squamous cell carcinoma cells

One of the key drivers for squamous cell carcinoma (SCC) proliferation is activation of the epidermal growth factor receptor (EGFR), a known proto-oncogene. However, the mechanism of EGFR-dependent SCC proliferation remains unclear. Our previous studies indicate that epidermal growth factor (EGF)-induced SCC cell proliferation requires the SH3 domain of phospholipase C-γ1 (PLC-γ1), but not its catalytic activity. The SH3 domain of PLC-γ1 is known to activate the short form of nuclear phosphatidylinositol 3-kinase enhancer (PIKE) that enhances the activity of nuclear class Ia phosphatidylinositol 3-kinase (PI3K) required for proliferation. However, PIKE has been described for more than a decade to be present exclusively in neuronal cells. In the present study, we found that PIKE was highly expressed in malignant human keratinocytes (SCC4 and SCC12B2) but had low expression in normal human keratinocytes. Immunohistochemical analysis showed strong nuclear staining of PIKE in human epidermal and tongue SCC specimens but little staining in the adjacent non-cancerous epithelium. Treatment of SCC4 cells with EGF-induced translocation of PLC-γ1 to the nucleus and binding of PLC-γ1 to the nuclear PIKE. Knockdown of PLC-γ1 or PIKE blocked EGF-induced activation of class Ia PI3K and protein kinase C-ζ and phosphorylation of nucleolin in the nucleus as well as EGF-induced SCC cell proliferation. However, inhibition of the catalytic activity of PLC-γ1 had little effect. These data suggest that PIKE has a critical role in EGF-induced SCC cell proliferation and may function as a proto-oncogene in SCC.

Development and comparison of a new personalized warfarin stable dose prediction algorithm in Chinese patients undergoing heart valve replacement

BACKGROUND

Pharmacogenetics-based algorithms would be especially desirable for patients undergoing heart valve replacement (HVR), who are particularly sensitive to warfarin during the initial treatment phase following surgery. We aimed to derive a warfarin dosing algorithm from data of Chinese patients undergoing HVR, and to compare it with previously published dosing algorithms as applied to our HVR patients.

METHODS

641 Chinese HVR patients on stable maintenance dose of warfarin were enrolled from a single clinic site. Data of 321 patients were used to derive a warfarin dosing algorithm using stepwise multiple linear regression analysis. Previously published algorithms were selected from Pubmed database for comparison. The performance of all the algorithms was characterized according to mean absolute error (MAE) and percentage of predicted doses falling within +/- 20% of clinically observed doses (percentage of ideal prediction) in the other 320 patients.

RESULTS

The newly developed algorithm included eight factors: VKORC1-1639G > A, CYP2C9*3, BSA, age, number of increasing INR drugs, smoking habit, preoperative stroke history and hypertension. Our algorithm accounted for 56.4% of variations in the inter-patient warfarin stable doses. All the algorithms showed better performance in a medium-dose (1.88-4.38 mg/day) and high-dose (> or = 4.38 mg/day) groupings than in a low-dose (< or = 1.88 mg/day) grouping. Compared with the 14 previously published algorithms, our algorithm had the lowest MAE (-0.07 mg/day) and the highest percentage of ideal prediction (62.8%) in the total validation cohort.

CONCLUSIONS

Our warfarin dosing algorithm is potentially useful for patients whose population profiles are similar to those of our patients.

Polymorphism identification in the goat <i>THRSP</i> gene and association analysis with growth traits

Abstract. cIn this study, we reported the analysis of THRSP gene polymorphisms in 610 goats of three breeds: Xinong Saanen (SN), Guanzhong (GZ) and Boer (BG). We identified new allelic variant: P2-G39294A (GenBank acc. no. JN618075) in the three goat breeds. At P2 locus, GG, GA and AA genotypes were found in the three goat breeds. The frequencies of G allele were 0.54–0.55 and frequencies of A allele were 0.46–0.45, and the PIC was 0.37. The SNP locus was in Hardy-Weinberg disequilibrium in Boer goat breed (P<0.05). Association of polymorphisms with growth traits was done at P2 locus in Boer goat breed. The result showed that AA genotype had remarkable growth traits at P2 locus (P<0.05). Therefore, these results suggest that THRSP gene is a strong candidate gene that affects growth traits in goat.

The role of nisin in fuel ethanol production with Saccharomyces cerevisiae

AIMS

To investigate the effects of nisin on lactobacilli contamination of yeast during ethanol fermentation and to determine the appropriate concentration required to control the growth of selected lactobacilli in a YP/glucose media fermentation model.

METHODS AND RESULTS

The lowest concentration of nisin tested (5 IU ml(-1) ) effectively controlled the contamination of YP/glucose media with 10(6) CFU ml(-1) lactobacilli. Lactic acid yield decreased from 5.0 to 2. 0 g l(-1) and potential ethanol yield losses owing to the growth and metabolism of Lactobacillus plantarum and Lactobacillus brevis were reduced by 11 and 7.8%, respectively. Approximately, equal concentrations of lactic acid were produced by Lact. plantarum and Lact. brevis in the presence of 5 and 2 IU ml(-1) nisin, respectively, thus demonstrating the relatively higher nisin sensitivity of Lact. brevis for the strains in this study. No differences were observed in the final ethanol concentrations produced by yeast in the absence of bacteria at any of the nisin concentrations tested.

CONCLUSIONS

Metabolism of contaminating bacteria was reduced in the presence of 5 IU ml(-1) nisin, resulting in reduced lactic acid production and increased ethanol production by the yeast.

SIGNIFICANCE AND IMPACT OF THE STUDY

Bacteriocins represent an alternative to the use of antibiotics for the control of bacterial contamination in fuel ethanol plants and may be important in preventing the emergence of antibiotic-resistant contaminating strains.