The type 1 equilibrative nucleoside transporter regulates anxiety-like behavior in mice

Activation of adenosine receptors in the brain reduces anxiety-like behavior in animals and humans. Because nucleoside transporters regulate adenosine levels, we used mice lacking the type 1 equilibrative nucleoside transporter (ENT1) to investigate whether ENT1 contributes to anxiety-like behavior. The ENT1 null mice spent more time in the center of an open field compared with wild-type littermates. In the elevated plus maze, ENT1 null mice entered more frequently into and spent more time exploring the open arms. The ENT1 null mice also spent more time exploring the light side of a light-dark box compared with wild-type mice. Microinjection of an ENT1-specific antagonist, nitrobenzylthioinosine (nitrobenzylmercaptopurine riboside), into the amygdala of C57BL/6J mice reduced anxiety-like behavior in the open field and elevated plus maze. These findings show that amygdala ENT1 modulates anxiety-like behavior. The ENT1 may be a drug target for the treatment of anxiety disorders.

Loss of expression of Kruppel-like factor 6 in primary hepatocellular carcinoma and hepatoma cell lines

KLF6 (Zf9, COPEB), an ubiquitous transcription factor, maps to chromosome 10p. Recently, KLF6 was found to have a more generalized role in tumorigenesis as a candidate tumor suppressor gene for some tumors. However, results from other published studies seem not to be in agreement with data from previous studies. Gene-expression analysis is increasingly important in biological research. Loss of expression is one of the mechanisms to functionally inactivate a tumor suppressor gene. To investigate the expression change of KLF6 gene associated with HCC as a step toward a better understanding of the molecular pathophysiology, and to provide the basis for analysis of KLF6 gene in HCC carcinogenesis. We analyzed the expression of KLF6 mRNA in 26 samples of HCC tissues and hepatoma cell lines(Hep3B and HepG2) detected by Real-Time quantitative RT-PCR (qRT-PCR) and conventional RT-PCR assay. To confirm and extend the data obtained at RNA level, we performed detailed immunoblotting analysis on HCC tissues and hepatoma cell lines using a rabbit polyclonal antibody specific for KLF6. NKLF6 detected by qRT-PCR from HCC and corresponding noncancerous tissues was 0.04+/-0.038 and 0.116+/-0.101, respectively. These data demonstrated that KLF6 mRNA level was significantly decreased in HCC, compared with corresponding noncancerous tissues (t =3.683 , P<0.001). The frequency of Hepatoma Cell Lines with KLF6 down-regulation detected by conventional PT-PCR, seems to be consistent with a previous study using real-time PCR assays in tumor samples. KLF6 expression levels were determined by Western blot. Compared to the matched surrounding tissues, a clear decrease of KLF6 protein levels in tumor tissues was observable (t=13.59, P<0.001). Hepatoma cell lines also showed low-level of KLF6 protein (P<0.01) expression. Immunohistochemistry and immunocytochemistry showed a faint diffused staining in the HCC tissues and hepatoma cell lines, and endogenous KLF6 protein was detected mostly in the cytoplasm. KLF6 gene appeared markedly reduced in HCC tissues and hepatoma cell lines. Frequent down-regulation of KLF6 strongly suggested that it is a candidate of tumor suppressor gene for HCC.

Mechanical shear wave induced by piezoelectric ceramics for magnetic resonance elastography

Magnetic resonance elastography (MRE) is a noninvasive technique to measure elasticity of tissues in vivo. For MRE, an additional actuator is needed to be mounted on an observed object, and to excite the object. In this paper, an experiment is set to obtain MR mechanical shear wave images. A novel actuator is proposed to generate mechanical wave propagating inside a gel phantom. The actuator is made of piezoelectric ceramics, and is fixed on a plexiglass bracket. Both of the gel phantom and the actuator are put into a head coil in the scanner's bore. The actuator works synchronously with an imaging sequence running on the scanner. The sequence is modified from a FLASH sequence, into a motion-sensitizing phase-contrast sequence, for shear wave imaging. Wave images are presented to show the effect of those factors, such as the stiffness of the phantoms, the frequency of the actuator, the parameters of the motion-sensitizing gradient, and the oscillation of the patient bed.

Observation of Upsilon(3S)-->tau+tau- and tests of lepton universality in Upsilon decays

Using data collected with the CLEO III detector at the CESR e+e- collider, we report on a first observation of the decay Upsilon(3S)-->tau+tau-, and precisely measure the ratio of branching fractions of Upsilon(nS), n=1, 2, 3, to tau+tau- and mu+mu- final states, finding agreement with expectations from lepton universality. We derive absolute branching fractions for these decays, and also set a limit on the influence of a low mass CP-odd Higgs boson in the decay of the Upsilon(1S).

Determination of suitable pretreatment method for old-intermediate landfill leachate

For old-intermediate landfill leachate, the high concentrations of ammonium and low BOD/COD (B/C) ratios are the main obstacles to biological treatment. Magnesium ammonium phosphate (MAP) precipitation (struvite precipitation) and Fenton oxidation were employed as pretreatment options on this type of leachate. Results revealed that at optimum operating conditions of pH 9 and MAP ratio of 1:1:1, ammonium and COD were reduced by 97.8% from 2132 mg l(-1) to 46 mg l(-1) and by 50.0% from 4113 mg l(-1) to 2057 mg l(-1), respectively using struvite precipitation. COD was lowered by 76% and ammonium by 6.3% using Fenton oxidation at optimized conditions of H2O2 dosage of 3500 mg l(-1), Fe2+ dosage of 437.5 mg l(-1), pH 4, a mass ratio of 8 for H2O2: Fe2+ dosage and reaction time of 30 minutes. At their respective operating conditions, the B/C ratios for both pre-treatment methods were increased from 0.35 in the raw leachate to 0.66 and 0.71, for MAP precipitation and Fenton oxidation respectively, values that are suitable for biological treatment. This study shows that struvite precipitation is a suitable pretreatment option resulting in the simultaneous removal of ammonium and organic matter in old-intermediate landfill leachate.

Proteomic analysis of steroid-triggered autophagic programmed cell death during Drosophila development

Two morphological forms of programmed cell death, apoptosis and autophagic cell death, remove unneeded or damaged cells during animal development. Although the mechanisms that regulate apoptosis are well studied, little is known about autophagic cell death. A shotgun proteome analysis of purified dying larval salivary glands in Drosophila was used to identify proteins that are expressed during autophagic programmed cell death. A total of 5661 proteins were identified from stages before and after the onset of cell death. Analyses of these data enabled us to identify proteins from a number of interesting categories including regulators of transcription, the apoptosis, autophagy, lysosomal, and ubiquitin proteasome degradation pathways, and proteins involved in growth control. Several of the identified proteins, including the serine/threonine kinase warts (Wts), were not detected using whole-genome DNA microarrays, providing support for the importance of such high-throughput proteomic technology. Wts regulates cell-cycle arrest and apoptosis, and significantly, mutations in wts prevent destruction of salivary glands.

Prediction of linear B-cell epitopes using amino acid pair antigenicity scale

Identification of antigenic sites on proteins is of vital importance for developing synthetic peptide vaccines, immunodiagnostic tests and antibody production. Currently, most of the prediction algorithms rely on amino acid propensity scales using a sliding window approach. These methods are oversimplified and yield poor predicted results in practice. In this paper, a novel scale, called the amino acid pair (AAP) antigenicity scale, is proposed that is based on the finding that B-cell epitopes favor particular AAPs. It is demonstrated that, using SVM (support vector machine) classifier, the AAP antigenicity scale approach has much better performance than the existing scales based on the single amino acid propensity. The AAP antigenicity scale can reflect some special sequence-coupled feature in the B-cell epitopes, which is the essence why the new approach is superior to the existing ones. It is anticipated that with the continuous increase of the known epitope data, the power of the AAP antigenicity scale approach will be further enhanced.

NOTCH1-induced T-cell leukemia in transgenic zebrafish

Activating mutations in the NOTCH1 gene have been found in about 60% of patients with T-cell acute lymphoblastic leukemia (T-ALL). In order to study the molecular mechanisms by which altered Notch signaling induces leukemia, a zebrafish model of human NOTCH1-induced T-cell leukemia was generated. Seven of sixteen mosaic fish developed a T-cell lymphoproliferative disease at about 5 months. These neoplastic cells extensively invaded tissues throughout the fish and caused an aggressive and lethal leukemia when transplanted into irradiated recipient fish. However, stable transgenic fish exhibited a longer latency for leukemia onset. When the stable transgenic line was crossed with another line overexpressing the zebrafish bcl2 gene, the leukemia onset was dramatically accelerated, indicating synergy between the Notch pathway and the bcl2-mediated antiapoptotic pathway. Reverse transcription-polymerase chain reaction analysis showed that Notch target genes such as her6 and her9 were highly expressed in NOTCH1-induced leukemias. The ability of this model to detect a strong interaction between NOTCH1 and bcl2 suggests that genetic modifier screens have a high likelihood of revealing other genes that can cooperate with NOTCH1 to induce T-ALL.

Bcl-2 family proteins are essential for platelet survival

Platelets are relatively short-lived, anucleated cells that are essential for proper hemostasis. The regulation of platelet survival in the circulation remains poorly understood. The process of platelet activation and senescence in vivo is associated with processes similar to those observed during apoptosis in nucleated cells, including loss of mitochondrial membrane potential, caspase activation, phosphatidylserine (PS) externalization, and cell shrinkage. ABT-737, a potent antagonist of Bcl-2, Bcl-X(L), and Bcl-w, induces apoptosis in nucleated cells dependent on these proteins for survival. In vivo, ABT-737 induces a reduction of circulating platelets that is maintained during drug therapy, followed by recovery to normal levels within several days after treatment cessation. Whole body scintography utilizing ([111])Indium-labeled platelets in dogs shows that ABT-737-induced platelet clearance is primarily mediated by the liver. In vitro, ABT-737 treatment leads to activation of key apoptotic processes including cytochrome c release, caspase-3 activation, and PS externalization in isolated platelets. Despite these changes, ABT-737 is ineffective in promoting platelet activation as measured by granule release markers and platelet aggregation. Taken together, these data suggest that ABT-737 induces an apoptosis-like response in platelets that is distinct from platelet activation and results in enhanced clearance in vivo by the reticuloendothelial system.

Designing and transgenic expression of melanin gene in tobacco trichome and cotton fiber

In Streptomyces antibioticus, there are two genes TYRA and ORF438 required for the melanin biogenesis. To investigate whether expression of these two genes in cotton can change cotton fiber colour, we modified the TYRA and ORF438 genes to make their codon usage closer to the codon preference of cotton fiber genes. The resulting versions of these two genes were referred to as DTYRA and DORF438, respectively. Vacuolar targeting signals were also added to their ends. Under the cotton fiber specific LTP3 promoter, DORF438 and DTYRA were first transformed into model plant tobacco (Nicotiana tabacum). Molecular analyses showed that both the DORF438 and DTYRA genes were successfully expressed in transgenic plants, and the melanin deposition was observed in the trichomes of transgenic tobacco. Excitedly, when the same DORF438 and DTYRA expression cassettes were transformed into cotton (Gossypium hirsutum L.) by pollen tube pathway, the colour of cotton fiber changed from white to brown. Molecular analyses confirmed that both genes were transformed into cotton and expressed successfully. All these results indicate that the synthesized DOFR438 and DTYRA genes can work well in tobacco and cotton. Our study may provide a potential method for modifying the colour of cotton fiber.

Evaluation of certain food additives and contaminants

This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, with a view to recommending acceptable daily intakes (ADIs) and to preparing specifications for identity and purity. The Committee also evaluated the risk posed by two food contaminants, with the aim of advising on risk management options for the purpose of public health protection. The first part of the report contains a general discussion of the principles governing the toxicological evaluation and assessment of intake of food additives (in particular flavouring agents) and contaminants. A summary follows of the Committee's evaluations of technical, toxicological and intake data for certain food additives (acidified sodium chlorite, asparaginase from Aspergillus oryzae expressed in Aspergillus oryzae, carrageenan and processed Eucheuma seaweed, cyclotetraglucose and cyclotetraglucose syrup, isoamylase from Pseudomonas amyloderamosa, magnesium sulfate, phospholipase A1 from Fusarium venenatum expressed in Aspergillus oryzae, sodium iron(III) ethylenediaminetetraacetic acid (EDTA) and steviol glycosides); eight groups of related flavouring agents (linear and branched-chain aliphatic, unsaturated, unconjugated alcohols, aldehydes, acids and related esters; aliphatic acyclic and alicyclic terpenoid tertiary alcohols and structurally related substances; simple aliphatic and aromatic sulfides and thiols; aliphatic acyclic dials, trials and related substances; aliphatic acetals; sulfur-containing heterocyclic compounds; aliphatic and aromatic amines and amides; and aliphatic alicyclic linear alpha, beta -unsaturated di- and trienals and related alcohols, acids and esters); and two food contaminants (aflatoxin and ochratoxin A). Specifications for the following food additives were revised: maltol and ethyl maltol, nisin preparation, pectins, polyvinyl alcohol, and sucrose esters of fatty acids. Specifications for the following flavouring agents were revised: maltol and ethyl maltol, maltyl isobutyrate, 3-acetyl-2,5-dimethylfuran and 2,4,5-trimethyl-delta-oxazoline (Nos 1482, 1506 and 1559), and monomenthyl glutarate (No. 1414), as well as the method of assay for the sodium salts of certain flavouring agents. Annexed to the report are tables summarizing the Committee's recommendations for intakes and toxicological evaluations of the food additives and contaminants considered.

Microdosimetric characteristics of carbon track-segments

Carbon ions were introduced to radiation therapy due to their special physical and radiobiological properties. In heavy ion therapy, specification of radiation quality is an important issue and rapid calculations are often required for treatment planning. Because radiation qualities are closely related to microdosimetric spectra and parameters, this study is intended to provide microdosimetric parameters of carbon track-segments in the energy range from 50 MeV to 5 GeV. Monte-Carlo techniques are used to simulate track-segments of carbon ions in water. Microdosimetric quantities (the dose mean lineal energies) are calculated for the two components of the track-segment: the track-core formed by energy deposition of carbon ions and the track-penumbra (an extended region around the track-core produced by energy deposition of secondary electrons).

Cell/surface interactions and adhesion on Ti-6Al-4V: Effects of surface texture

This paper presents the results of an experimental study of the effects of surface texture on the interactions between human osteo-sarcoma (HOS) cells and Ti-6Al-4V. These include the Ti-6Al-4V with polished (smooth); Al(2)O(3) blasted (rough); and laser micro-grooved geometries with controlled spacings and depths. Immuno-fluorescence staining of adhesion proteins (actin and vinculin) was used to study the spreading and adhesion of HOS cells in 2 day culture experiments. Quantitative measures of adhesion were also obtained using an enzymatic detachment assay. The results are discussed within the context of existing theories of cell adhesion. The implications of the results are also examined for the design of textured surfaces in biomedical systems.

First Early Cambrian Radiolaria

Radiolarian skeletons are known from a limestone concretion collected from a black shale succession and from black cherts of the Yangtze Platform, China. Both occurrences are of earliest Cambrian age. The findings, reported in this paper, represent the oldest known fossil Radiolaria. Their spherical skeletons display a morphology typical of spherical radiolarians from Ordovician and younger faunas. This occurrence of radiolarians with radial symmetry and, most probably, a planktonic lifestyle can now be traced back into the earliest Cambrian. Thus, radiolarians have been part of the early oceanic plankton and likely played a significant role in the silica cycle of the oceans along with siliceous sponges.

Matrix-assisted laser desorption/ionization time-of-flight based wheat gliadin protein peaks are useful molecular markers for wheat genetic study

Matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) instrumentation has been used to analyze wheat seed gliadins as an alternative to other established methods, including sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), capillary electrophoresis (CE), high-performance liquid chromatography (HPLC), etc. The MALDI-TOF approach has shown to have many advantages such as high resolution, cost effectiveness and high throughput. MALDI-TOF-based gliadin profiles have been used for fast wheat cultivar identification. However, the genetic information represented by individual gliadin peaks has not been utilized. In this study a wheat doubled haploid population with a genetic linkage map of good coverage was used to assay individual gliadin peaks from MALDI-TOF profiles as molecular markers. Eight segregating peaks in the population were scored as polymorphic across the population. The 1 to 1 segregating ratios validated the scoring of the peaks and all peaks were mapped to the expected chromosomes or linkage groups on the available linkage map: 1 peak on chromosome 1A, 1 on 6A, 4 on 6B and 2 on 6D.

Absorbed dose conversion coefficients for embryo and foetus in neutron fields

The Monte Carlo code MCNPX has been used to determine mean absorbed doses to the embryo and foetus when the mother is exposed to neutron fields. There are situations, such as on-board aircraft, where high-energy neutrons are often peaked in top down (TOP) direction. In addition to previous publications for standard irradiation geometries, this study provides absorbed dose conversion coefficients for the embryo of 8 weeks and the foetus of 3, 6 or 9 months at TOP irradiation geometry. The conversion coefficients are compared with the coefficients in isotropic irradiation (ISO). With increasing neutron energies, the conversion coefficients in TOP irradiation become dominant. A set of conversion coefficients is constructed from the higher value in either ISO or TOP irradiation at a given neutron energy. In cases where the irradiation geometry is not adequately known, this set of conversion coefficients can be used in a conservative dose assessment for embryo and foetus in neutron fields.