High-throughput fabrication of organic nanowire devices with preferential internal alignment and improved performance

We demonstrate that arrays of nanowires of conjugated polymers can be easily produced by a simple embossing protocol, compatible with very large scale integration technology. The embossing process is shown to have the supplementary virtue to increase the internal degree of order of the nanowires, significantly enhancing their performance. This is applied to the fabrication of nanowire-based devices consisting of a liquid crystalline light-emitting polymer, of a liquid crystalline semiconducting polymer, and of an amorphous conducting polymer, illustrating the versatility and wide applicability of the method.

Complexation of lipofectamine and cholesterol-modified DNA sequences studied by single-molecule fluorescence techniques

Lipoplex formation for normal and cholesterol-modified oligonucleotides is investigated by fluorescence correlation spectroscopy (FCS). To overcome the problems related to the fitting of autocorrelation curves when fluorescence bursts are present, the baseline fluorescence levels and the fluorescence bursts in the same trace were separately analyzed. This approach was not previously used in FCS studies of lipoplexes and allowed a more detailed characterization of this heterogeneous system. From the baseline levels, the number of free/bound DNA molecules and the presence of tens to hundreds of nanometer-sized lipoplexes were estimated using various mathematical models. Analysis of the fluorescent bursts provided an indication about the sizes of the lipoplexes, the number of DNA molecules in these aggregates, and the relative amount of lipids in each aggregate. An explanation for the higher transfection efficiency previously reported for one of the cholesterol-modified oligonucleotide compounds was found in relation to the formation of large size lipoplexes.

Solvent and pH dependent fluorescent properties of a dimethylaminostyryl borondipyrromethene dye in solution

Steady-state and time-resolved fluorescence techniques have been used to study the photophysical properties of the fluorescent BODIPY-derived dye 3-{2-[4-(dimethylamino)phenyl]ethenyl}-4,4-difluoro-8-(4-methoxyphenyl)-1,5,7-trimethyl-3a,4a-diaza-4-bora-s-indacene. This compound has been synthesized via a microwave-assisted condensation of p-N,N-dimethylaminobenzaldehyde with the appropriate 1,3,5,7-tetramethyl substituted borondipyrromethene unit. The fluorescence properties of the dye are strongly solvent dependent: increasing the solvent polarity leads to lower fluorescence quantum yields and lifetimes, and the wavelength of maximum fluorescence emission shifts to the red. The Catalán solvent scales are found to be the most suitable for describing the solvatochromic shifts of the fluorescence emission. These are dominated by polarity/polarizability effects, as confirmed by quantum-chemical calculations performed in the dielectric continuum approximation. Fluorescence decay profiles of the dye can be described by a single-exponential fit in most solvents investigated, while two decay times are found in alcohols. The dye undergoes a reversible protonation-deprotonation reaction in the acidic pH range with a pK(a) of 2.25 in acetonitrile solution. Fluorimetric titrations as a function of pH produce fluorescence emission enhancements at lower pH. The fluorescence excitation spectra show a hypsochromic shift from 600 nm for the neutral amine to 553 nm for the ammonium form, so that ratiometric measurements can be used to determine pK(a).

Singlet oxygen photosensitization by EGFP and its chromophore HBDI

The photosensitization of reactive oxygen species and, in particular, singlet oxygen by proteins from the green fluorescent protein (GFP) family influences important processes such as photobleaching and genetically targeted chromophore-assisted light inactivation. In this article, we report an investigation of singlet oxygen photoproduction by GFPs using time-resolved detection of the NIR phosphorescence of singlet oxygen at 1275 nm. We have detected singlet oxygen generated by enhanced (E)GFP, and measured a lifetime of 4 micros in deuterated solution. By comparison with the model compound of the EGFP fluorophore 4-hydroxybenzylidene-1,2-dimethylimidazoline (HBDI), our results confirm that the beta-can of EGFP provides shielding of the fluorophore and reduces the production of this reactive oxygen species. In addition, our results yield new information about the triplet state of these proteins. The quantum yield for singlet oxygen photosensitization by the model chromophore HBDI is 0.004.

Single-molecule fluorescence spectroscopy in (bio)catalysis

The ever-improving time and space resolution and molecular detection sensitivity of fluorescence microscopy offer unique opportunities to deepen our insights into the function of chemical and biological catalysts. Because single-molecule microscopy allows for counting the turnover events one by one, one can map the distribution of the catalytic activities of different sites in solid heterogeneous catalysts, or one can study time-dependent activity fluctuations of individual sites in enzymes or chemical catalysts. By experimentally monitoring individuals rather than populations, the origin of complex behavior, e.g., in kinetics or in deactivation processes, can be successfully elucidated. Recent progress of temporal and spatial resolution in single-molecule fluorescence microscopy is discussed in light of its impact on catalytic assays. Key concepts are illustrated regarding the use of fluorescent reporters in catalytic reactions. Future challenges comprising the integration of other techniques, such as diffraction, scanning probe, or vibrational methods in single-molecule fluorescence spectroscopy are suggested.

Singlet–Singlet Annihilation Leading to a Charge-Transfer Intermediate in Chromophore-End-Capped Pentaphenylenes

The excited-state properties of two peryleneimide chromophore end-capped pentaphenylene compounds were investigated in detail using femtosecond transient absorption and single-photon timing experiments. Singlet-singlet annihilation was found to promote one chromophore into a higher excited state and results in the formation of an ultra-short-living intermediate charge-transfer (CT) state in the S(n)-S(1) deactivation pathway. In low-polarity solvents, this CT state is found to be energetically higher than the first excited state and thus cannot be populated via one-photon excitation. The observed CT state decays with a time constant of about 1 ps to form the lowest singlet excited state. These results demonstrate the potential use of the singlet-singlet annihilation as a novel tool in studying reactions occurring in states that are energetically above the S(1).

Visualization of membrane rafts using a perylene monoimide derivative and fluorescence lifetime imaging

A new membrane probe, based on the perylene imide chromophore, with excellent photophysical properties (high absorption coefficient, quantum yield (QY) approximately 1, high photostability) and excited in the visible domain is proposed for the study of membrane rafts. Visualization of separation between the liquid-ordered (Lo) and the liquid-disordered (Ld) phases can be achieved in artificial membranes by fluorescence lifetime imaging due to the different decay times of the membrane probe in the two phases. Rafts on micrometer-scale in cell membranes due to cellular activation can also be observed by this method. The decay time of the dye in the Lo phase is higher than in organic solvents where its QY is 1. This allows proposing a (possible general) mechanism for the decay time increase in the Lo phase, based on the local field effects of the surrounding molecules. For other fluorophores with QY<1, the suggested mechanism could also contribute, in addition to effects reducing the nonradiative decay pathways, to an increase of the fluorescence decay time in the Lo phase.

Fluorescence of Single Molecules in Polymer Films: Sensitivity of Blinking to Local Environment

The single-molecule fluorescence blinking behavior of the organic dye Atto647N in various polymer matrixes such as Zeonex, PVK, and PVA as well as aqueous media was investigated. Fluorescence blinking with off-times in the millisecond to second time range is assigned to dye radical ions formed by photoinduced electron transfer reactions from or to the environment. In Zeonex and PVK, the measured off-time distributions show power law dependence, whereas, in PVA, no such dependence is observed. Rather, in this polymer, off-time distributions can be best fitted to monoexponential or stretched exponential functions. Furthermore, treatment of PVA samples to mild heating and low pressure greatly reduces the frequency of blinking events. We tentatively ascribe this to the removal of water pockets within the polymer film itself. Measurements of the dye immobilized in water in the presence of methylviologen, a strongly oxidizing agent, reveal simple exponential on- and off-time distributions. Thus, our data suggest that the blinking behavior of single organic molecules is sensitive to their immediate environment and, moreover, that fluorescence blinking on- and off-time distributions do not inherently and uniquely obey a power law.

Fluorescence lifetime fluctuations of single molecules probe the local environment of oligomers around the glass transition temperature

Single molecule fluorescence experiments have been performed on a BODIPY-based dye embedded in oligo(styrene) matrices to probe the density fluctuations and the relaxation dynamics of chain segments surrounding the dye molecules. The time-dependent fluorescence lifetime of the BODIPY probe was recorded as an observable for the local density fluctuations. At room temperature, the mean fraction of holes surrounding the probes is shown to be unaffected by the molecular weight in the glassy state. In contrast, the free volume increases significantly in the supercooled regime. These observations are discussed in the framework of the entropic theories of the glass transition.

Highlighted generation of fluorescence signals using simultaneous two-color irradiation on Dronpa mutants

Dronpa absorbs blue light and emits bright green fluorescence. It can also be converted by strong irradiation at 490 nm to a nonfluorescent state, which can then be switched back to the original emissive state with irradiation at 400 nm. Through semirandom mutagenesis studies, we have developed two mutants of Dronpa that show efficient photoswitching kinetics. Compared to Dronpa, the mutants can be turned off by blue light more efficiently. Thus, excitation with an argon laser line (488 nm) makes the mutants quickly become dark such that no substantial fluorescence signals can be observed. Excitation with a violet laser diode (405 nm) also produces no fluorescence signals. Simultaneous 488- and 405-nm irradiation, however, results in a rapid oscillation between the two states, thereby keeping the emissive state population large enough to produce sufficiently bright fluorescence signals.

Orientational effects in the excitation and de-excitation of single molecules interacting with donut-mode laser beams

The interactions between single molecules and three-dimensional donut modes in fluorescence microscopy are discussed based on the vector diffraction theory of light.We find that the use of donut modes generated from a linearly polarized laser beam can yield information about the orientation of immobilized single molecules, allowing for their use in orientational imaging. While fairly insensitive over a range of orientations, this technique is seen to be very sensitive for the subset of orientations where the transition dipole of the molecule is oriented close to the optical axis of the microscope and perpendicular to the input polarization. In a second part of the paper we discuss the impact of the molecular orientation on the resolution improvement in STED microscopy. We find that, even for circularly polarized excitation light, the expected resolution improvement depends on the orientation of the molecule relative to the optical axis of the microscope.

Single-Molecule Spectroscopic Investigation of Energy Migration Processes in Cyclic Porphyrin Arrays

Covalently linked cyclic porphyrin arrays have been synthesized to mimic natural light-harvesting apparatuses and to investigate the highly efficient energy migration processes occurring in these systems for future applications in molecular photonics. To avoid an ensemble-averaged picture, we performed a single-molecule spectroscopic study on the energy migration processes of cyclic porphyrin arrays and a linear model compound embedded in a rigid polymer matrix by recording fluorescence intensity trajectories, by performing coincidence measurements, and by doing wide-field defocused imaging. Our study demonstrates efficient energy migration within the cyclic porphyrin arrays at the single-molecule level. By comparison with the data of the linear model compound, we could pinpoint the role of the dipole-dipole coupling between diporphyrin subunits and the rigidity of the cyclic structures on the energy transfer processes.

Direct measurement of the end-to-end distance of individual polyfluorene polymer chains

Wide-field imaging of individual multichromophoric molecules and successive photobleaching were used to determine, accurately, the relative position of the chromophores in such systems. First, a polyphenylene dendrimer with well-defined geometry was used to establish the accuracy in localization that can be obtained by this methodology. For a signal-to-noise ratio of 20, interchromophoric distances could be measured with 4 nm accuracy. Next, the method was used to determine the end-to-end distribution of an end-capped polyfluorene polymer. From comparison between the experimental and simulated distributions, information on the conformation of the polymer could be deduced. It was found that the polymer has a nonlinear conformation. A conjugation length of six monomer units gave the best fit of the experimental data to the proposed model.

Single molecule fluorescence spectroscopy of pH sensitive oligonucleotide switches

Several authors demonstrated that an oligonucleotide based pH-sensitive construct can act as a switch between an open and a closed state by changing the pH. To validate this process, specially designed fluorescence dye-quencher substituted oligonucleotide constructs were developed to probe the switching between these two states. This paper reports on bulk and single molecule fluorescence investigations of a duplex-triplex pH sensitive oligonucleotide switch. On the bulk level, only a partial quenching of the fluorescence is observed, similarly to what is observed for other published switches and is supposed to be due to intermolecular interactions between oligonucleotide strands. On the single molecule level, each DNA-based nanometric construct shows a complete switching. These observations suggest the tendency of the DNA construct to associate at high concentration.

Fluorescence lifetime standards for time and frequency domain fluorescence spectroscopy

A series of fluorophores with single-exponential fluorescence decays in liquid solution at 20 degrees C were measured independently by nine laboratories using single-photon timing and multifrequency phase and modulation fluorometry instruments with lasers as excitation source. The dyes that can serve as fluorescence lifetime standards for time-domain and frequency-domain measurements are all commercially available, are photostable under the conditions of the measurements, and are soluble in solvents of spectroscopic quality (methanol, cyclohexane, water). These lifetime standards are anthracene, 9-cyanoanthracene, 9,10-diphenylanthracene, N-methylcarbazole, coumarin 153, erythrosin B, N-acetyl-l-tryptophanamide, 1,4-bis(5-phenyloxazol-2-yl)benzene, 2,5-diphenyloxazole, rhodamine B, rubrene, N-(3-sulfopropyl)acridinium, and 1,4-diphenylbenzene. At 20 degrees C, the fluorescence lifetimes vary from 89 ps to 31.2 ns, depending on fluorescent dye and solvent, which is a useful range for modern pico- and nanosecond time-domain or mega- to gigahertz frequency-domain instrumentation. The decay times are independent of the excitation and emission wavelengths. Dependent on the structure of the dye and the solvent, the excitation wavelengths used range from 284 to 575 nm, the emission from 330 to 630 nm. These lifetime standards may be used to either calibrate or test the resolution of time- and frequency-domain instrumentation or as reference compounds to eliminate the color effect in photomultiplier tubes. Statistical analyses by means of two-sample charts indicate that there is no laboratory bias in the lifetime determinations. Moreover, statistical tests show that there is an excellent correlation between the lifetimes estimated by the time-domain and frequency-domain fluorometries. Comprehensive tables compiling the results for 20 (fluorescence lifetime standard/solvent) combinations are given.