Highly Efficient Synthesis and Assay of Protein-Imprinted Nanogels by Using Magnetic Templates

We report an approach integrating the synthesis of protein‐imprinted nanogels (“plastic antibodies”) with a highly sensitive assay employing templates attached to magnetic carriers. The enzymes trypsin and pepsin were immobilized on amino‐functionalized solgel‐coated magnetic nanoparticles (magNPs). Lightly crosslinked fluorescently doped polyacrylamide nanogels were subsequently produced by high‐dilution polymerization of monomers in the presence of the magNPs. The nanogels were characterised by a novel competitive fluorescence assay employing identical protein‐conjugated nanoparticles as ligands to reversibly immobilize the corresponding nanogels. Both nanogels exhibited K_d<10 pM for their respective target protein and low cross‐reactivity with five reference proteins. This agrees with affinities reported for solid‐phase‐synthesized nanogels prepared using low‐surface‐area glass‐bead supports. This approach simplifies the development and production of plastic antibodies and offers direct access to a practical bioassay.

Reversible Self-Assembled Monolayers (rSAMs) as Robust and Fluidic Lipid Bilayer Mimics

Lipid bilayers, forming the outer barrier of cells, display a wide array of proteins and carbohydrates for modulating interfacial biological interactions. Formed by the spontaneous self-assembly of lipid molecules, these bilayers feature liquid crystalline order, while retaining a high degree of lateral mobility. Studies of these dynamic phenomena have been hampered by the fragility and instability of corresponding biomimetic cell membrane models. Here, we present the construct of a series of oligoethylene glycol-terminated reversible self-assembled monolayers (rSAMs) featuring lipid-bilayer-like fluidity, while retaining air and protein stability and resistance. These robust and ordered layers were prepared by simply immersing a carboxylic acid-terminated self-assembled monolayer into 5-50 μM aqueous ω-(4-ethylene glycol-phenoxy)-α-(4-amidinophenoxy)decane solutions. It is anticipated that this new class of robust and fluidic two-dimensional biomimetic surfaces will impact the design of rugged cell surface mimics and high-performance biosensors.

An Epitope-Imprinted Biointerface with Dynamic Bioactivity for Modulating Cell-Biomaterial Interactions

In this study, an epitope-imprinting strategy was employed for the dynamic display of bioactive ligands on a material interface. An imprinted surface was initially designed to exhibit specific affinity towards a short peptide (i.e., the epitope). This surface was subsequently used to anchor an epitope-tagged cell-adhesive peptide ligand (RGD: Arg-Gly-Asp). Owing to reversible epitope-binding affinity, ligand presentation and thereby cell adhesion could be controlled. As compared to current strategies for the fabrication of dynamic biointerfaces, for example, through reversible covalent or host-guest interactions, such a molecularly tunable dynamic system based on a surface-imprinting process may unlock new applications in in situ cell biology, diagnostics, and regenerative medicine.

Reversible Self-Assembled Monolayers (rSAMs): Adaptable Surfaces for Enhanced Multivalent Interactions and Ultrasensitive Virus Detection

We report on the design of pH-switchable monolayers allowing a reversible and ordered introduction of affinity reagents on sensor surfaces. The principal layer building blocks consist of α-(4-amidinophenoxy)alkanes decorated at the ω-position with affinity ligands. These spontaneously self-assemble on top of carboxylic acid terminated SAMs to form reversible homo or mixed monolayers (rSAMs) that are tunable with respect to the nature of the head group, layer order and stability while featuring pH responsiveness and the dynamic nature of noncovalent build assemblies. We show that this results in a range of unique biosensor features. As a first example a sialic acid rSAM featuring strong lectin affinity is here used to sense hemagglutinin and influenza virus (H5N1) at the pM and fM level by in situ ellipsometry in a fully reversible fashion. We believe that the rSAM concept will find widespread use in surface chemistry and overall for boosting sensitivity in affinity biosensors.

Ratiometric Fluorescence Detection of Phosphorylated Amino Acids Through Excited-State Proton Transfer by Using Molecularly Imprinted Polymer (MIP) Recognition Nanolayers

A 2,3-diaminophenazine bis-urea fluorescent probe monomer (1) was developed. It responds to phenylphosphate and phosphorylated amino acids in a ratiometric fashion with enhanced fluorescence accompanied by the development of a redshifted emission band arising from an excited-state proton transfer (ESPT) process in the hydrogen-bonded probe/analyte complex. The two urea groups of 1 form a cleft-like binding pocket (K_b >10¹⁰  L²  mol^-2 for 1:2 complex). Imprinting of 1 in presence of ethyl ester- and fluorenylmethyloxycarbonyl (Fmoc)-protected phosphorylated tyrosine (Fmoc-pTyr-OEt) as the template, methacrylamide as co-monomer, and ethyleneglycol dimethacrylate as cross-linker gave few-nanometer-thick molecularly imprinted polymer (MIP) shells on silica core microparticles with excellent selectivity for the template in a buffered biphasic assay. The supramolecular recognition features were established by spectroscopic and NMR studies. Rational screening of co-monomers and cross-linkers allowed to single out the best performing MIP components, giving significant imprinting factors (IF>3.5) while retaining ESPT emission and the ratiometric response in the thin polymer shell. Combination of the bead-based detection scheme with the phase-transfer assay dramatically improved the IF to 15.9, allowing sensitive determination of the analyte directly in aqueous media.

Synergistic Catalysis by "Polymeric Microzymes and Inorganic Nanozymes": The 1+1>2 Effect for Intramolecular Cyclization of Peptides

In this work, we developed an efficient "molecularly imprinted polymer microzymes and inorganic magnetic nanozymes" synergistic catalysis strategy for the formation of disulfide bonds in peptides. The polymeric microzymes showed excellent selectivity toward the template peptide as well as the main reactant (linear peptide), and the Fe₃O₄ magnetic nanoparticle (MNP) nanozymes inhibited the intermolecular reaction during the formation of disulfide bonds in peptides. As a result, the integration of the two different artificial enzymes in one process facilitates the intramolecular cyclization in high product yields (59.3%) with excellent selectivity. Mechanism study indicates the synergistic effect was occurred by using a "reversed solid phase synthesis" strategy with an enhanced shift of reaction balance to product generation. We believe the synergistic catalysis by "polymeric microzymes and inorganic nanozymes" presented in the present work may open new opportunities in creation of multifunctional enzyme mimics for sensing, imaging, and drug delivery.

Molecularly Imprinted Porous Monolithic Materials from Melamine-Formaldehyde for Selective Trapping of Phosphopeptides

Thirty-five melamine-formaldehyde (MF) monolithic materials with bimodal pore distributions were synthesized in fused silica capillaries by catalyst-free polycondensation, starting with an aqueous MF precondensate, using acetonitrile as the macroporogen and a variety of aliphatic polyethers and triblock copolymeric surfactants as porogens and mesoporogens, respectively. By varying the prepolymer composition and the type and molecular weight of the polymeric porogen components, a library of porous monolithic materials was produced, covering a range of meso- and macroporous properties. A multivariate evaluation revealed that the amount of surfactant was the strongest contributor to specific surface area and pore volume and to the inversely related mesopore size, whereas the macropore dimensions were controlled mainly by the amount of aliphatic polyether porogen. One of these capillary monoliths, chosen based on the combination of meso- and macropores providing optimal percolative flow and accessible surface area, was synthesized in the presence of N-Fmoc and O-Et protected phosphoserine and phosphotyrosine to prepare molecularly imprinted monoliths with surface layers selective for phosphopeptides. These imprinted monoliths were characterized alongside nonimprinted monoliths by a variety of techniques and finally evaluated by liquid chromatography-mass spectrometry in the capillary format to assess their abilities to trap and release phosphorylated amino acids and peptides from partly aqueous media. Selective enrichment of phosphorylated targets was demonstrated, suggesting that these materials could be useful as trapping media in affinity-based phosphoproteomics.

Exploring the peptide retention mechanism in molecularly imprinted polymers

Molecularly imprinted polymers (MIPs) have been used as useful sorbents in solid-phase extraction for a wide range of molecules and sample matrices. Their unique selectivity can be fine-tuned in the imprinting process and is crucial for the extraction of macromolecules from complex matrices such as serum. A relevant example of this is the application of MIPs to peptides in diagnostic assays. In this article the selectivity of MIPs, previously implemented in a quantitative mass-spectrometric assay for the biomarker pro-gastrin-releasing peptide, is investigated. Partial least squares regression was used to generate models for the evaluation and prediction of the retention mechanism of MIPs. A hypothesis on interactions of MIPs with the target peptide was verified by ad hoc experiments considering the relevant peptide physicochemical properties highlighted from the multivariate analysis. Novel insights into and knowledge of the driving forces responsible for the MIP selectivity have been obtained and can be directly used for further optimization of MIP imprinting strategies. Graphical Abstract Applied analytical strategy: the Solid Phase Extraction (SPE) of digested Bovin Serum Albumin (BSA), using Molecularly Imprinted Polymers (MIP), is followed by the liquid chromatography-mass spectrometry (LC-MS) analysis for the identification of the retained peptides. The further application of multivariate analysis allows setting up a Partial Least Square (PLS) model, which describes the peptide retention into the MIP and gives additional knowledge to be used in the optimization of the MIP and the whole SPE method.

Filter Plate-Based Screening of MIP SPE Materials for Capture of the Biomarker Pro-Gastrin-Releasing Peptide

Affinity-based solid-phase extraction (SPE) is an attractive low-cost sample preparation strategy for biomarker analysis. Molecularly imprinted polymers (MIPs) as affinity sorbents offer unique opportunities for affinity SPE, due to their low manufacturing cost and high robustness. A limitation is the prediction of their affinity; therefore, screening of analyte recovery and specificity within a large range of SPE conditions is important in order to ensure high-sensitivity detection and assay reproducibility. Here, a µ-SPE method for screening of the MIP-SPE materials using a commercial 384-well filter plate is presented. The method allows for rapid and automated screening using 10-30 µL of packed SPE sorbent per well and sample volumes in the range of 10-70 µL. This enables screening of many different SPE sorbents while simultaneously identifying optimal SPE conditions. In addition, the 384-well format also facilitates detection with a multitude of analytical platforms. Performance of the µ-MIP-SPE method was investigated using a series of MIPs designed to capture pro-gastrin-releasing peptide (ProGRP). Fractions coming from sample load, cartridge wash, and elution were collected and analyzed using mass spectrometry (MS). The top-performing MIPs were identified, together with proper SPE conditions.

Phospholipid imprinted polymers as selective endotoxin scavengers

Herein we explore phospholipid imprinting as a means to design receptors for complex glycolipids comprising the toxic lipopolysaccharide endotoxin. A series of polymerizable bis-imidazolium and urea hosts were evaluated as cationic and neutral hosts for phosphates and phosphonates, the latter used as mimics of the phospholipid head groups. The bis-imidazolium hosts interacted with the guests in a cooperative manner leading to the presence of tight and well defined 1:2 ternary complexes. Optimized monomer combinations were subsequently used for imprinting of phosphatidic acid as an endotoxin dummy template. Presence of the aforementioned ternary complexes during polymerization resulted in imprinting of lipid dimers - the latter believed to crudely mimic the endotoxin Lipid A motif. The polymers were characterized with respect to template rebinding, binding affinity, capacity and common structural properties, leading to the identification of polymers which were thereafter subjected to an industrially validated endotoxin removal test. Two of the polymers were capable of removing endotoxin down to levels well below the accepted threshold (0.005 EU/mg API) in pharmaceutical production.

Hierarchically templated beads with tailored pore structure for phosphopeptide capture and phosphoproteomics

Phosphotyrosine selective beads prepared by polymer templating at two length scales results in improved capture of larger sized peptide fragments from tryptic protein digests.

Cationic pTyr/pSer imprinted polymers based on a bis-imidazolium host monomer: phosphopeptide recognition in aqueous buffers demonstrated by μ-liquid chromatography and monolithic columns

Capillary monoliths featuring grafted molecularly imprinted polymer films incorporating on a bis-imidazolium host monomer, displayed a remarkable crossreactivity with phosphorylated peptides in buffered media.

Catalytic Formation of Disulfide Bonds in Peptides by Molecularly Imprinted Microgels at Oil/Water Interfaces

This work describes the preparation and investigation of molecularly imprinted polymer (MIP) microgel (MG) stabilized Pickering emulsions (PEs) for their ability to catalyze the formation of disulfide bonds in peptides at the O/W interface. The MIP MGs were synthesized via precipitation polymerization and a programmed initiator change strategy. The MIP MGs were characterized using DLS analysis, SEM measurement, and optical microscopy analysis. The dry and wet MIP MGs showed a hydrodynamic diameter of 100 and 280 nm, respectively. A template rebinding experiment showed that the MIP MGs bound over two times more template (24 mg g^-1) compared to the uptake displayed by a nonimprinted reference polymer (NIP) MG (10 mg g^-1) at saturation. Using the MIP MGs as stabilizers, catalytic oxidation systems were prepared by emulsifying the oil phase and water phase in the presence of different oxidizing agents. During the cyclization, the isolation of the thiol precursors and the oxidizing reagents nonselectively decreased the formation of the byproducts, while the imprinted cavities on the MIP MGs selectively promoted the intramolecular cyclization of peptides. When I₂ was used as the oxidizing agent, the MIP-PE-I₂ system showed a product yield of 50%, corresponding to a nearly 2-fold increase compared to that of the nonimprinted polymer NIP-PE-I₂ system (26%). We believe the interfacial catalysis system presented in this work may offer significant benefits in synthetic peptide chemistry by raising productivity while suppressing the formation of byproducts.

Different expression levels of glycans on leukemic cells-a novel screening method with molecularly imprinted polymers (MIP) targeting sialic acid

Sialic acid (SA) is normally expressed on the cell membranes and is located at the terminal position of the sugar chains. SA plays an important role for regulation of the innate immunity, function as markers of the cells and can be recognized by a variety of receptors. Interestingly, the level of SA expression is increased on metastatic cancer cells. The availability of specific antibodies against SA is limited and, therefore, biomarker tools for detection of SA are lacking. We have recently presented a novel method for specific fluorescence labeling of SA molecular imprinted polymers (MIP). Here, we have performed an extended screening of SA expression by using SA-MIP and included four different chronic lymphocytic leukemia (CLL) cell lines, conveniently analyzed by flow cytometry and fluorescence microscopy. SA expression was detected in four cell lines at different levels, and the SA expression were verified with lectin-FITC. These results show that SA-MIP can be used as a plastic antibody for detection of SA using both flow cytometry and fluorescence microscopy. We suggest that SA-MIP can be used for screening of different tumor cells of various stages, including CLL cells.

Reflux precipitation polymerization: a new synthetic insight in molecular imprinting at high temperature

Reflux precipitation polymerization was first used to fabricate monodispersed MIP microspheres, indicating electrostatic interaction was important for molecular imprinting at high temperature.

Monoclonal antibody capture from cell culture supernatants using epitope imprinted macroporous membranes

A straightforward epitope imprinting procedure is used to prepare IgG affinity membranes directly applicable to mAb capture under near process realistic conditions.

Aminoglutethimide-imprinted xerogels in bulk and spherical formats, based on a multifunctional organo-alkoxysilane precursor

The multifunctional alkoxysilane precursor, 2,6-bis(propyl-trimethoxysilylurelene)pyridine (DPS) was designed and synthesized, envisaging a multiple hydrogen-bond interaction in the molecular imprinting of the drug aminoglutethimide (AGT). Imprinted xerogels were obtained in bulk and spherical formats. The spherical format was achieved by pore-filling onto spherical mesoporous silica, as a straightforward technique to generate the spherical format. The bulk gels presented better selectivity for the template against its glutarimide (GLU) analogue (selectivity factor: bulk 13.4; spherical 4.6), and good capacity (bulk 5521μmol/L; spherical 2679μmol/L) and imprinting factor parameters (bulk 11.3; spherical 1.4). On the other hand, the microspherical format exhibited better dynamic properties associated to chromatographic efficiency (theoretical plates: bulk 6.8; spherical 75) and mass transfer, due mainly to the existence of a mesoporous network, lacking in the bulk material. The performance of the imprinted xerogels was not as remarkable as that of their acrylic counterparts, previously described. Overall it was demonstrated that the use of designed new "breeds" of organo-alkoxysilanes may be a strategy to achieve satisfactory imprints by the sol-gel processes. DPS may in principle be applied even more effectively to other templates bearing better-matching spatially compatible acceptor-donor-acceptor arrays.

Sialic Acid-Imprinted Fluorescent Core-Shell Particles for Selective Labeling of Cell Surface Glycans

The expression of cell surface glycans terminating with sialic acid (SA) residues has been found to correlate with various disease states there among cancer. We here report a novel strategy for specific fluorescence labeling of such motifs. This is based on sialic acid-imprinted core-shell nanoparticles equipped with nitrobenzoxadiazole (NBD) fluorescent reporter groups allowing environmentally sensitive fluorescence detection at convenient excitation and emission wavelengths. Imprinting was achieved exploiting a hybrid approach combining reversible boronate ester formation between p-vinylphenylboronic acid and SA, the introduction of cationic amine functionalities, and the use of an NBD-appended urea-monomer as a binary hydrogen-bond donor targeting the SA carboxylic acid and OH functionalities. The monomers were grafted from 200 nm RAFT-modified silica core particles using ethylene glycol dimethacrylate (EGDMA) as cross-linker resulting in a shell thickness of ca. 10 nm. The particles displayed strong affinity for SA in methanol/water mixtures (K = 6.6 × 10(5) M(-1) in 2% water, 5.9 × 10(3) M(-1) in 98% water, B(max) ≈ 10 μmol g(-1)), whereas binding of the competitor glucuronic acid (GA) and other monosaccharides was considerably weaker (K (GA) = 1.8 × 10(3) M(-1) in 98% water). In cell imaging experiments, the particles selectively stained different cell lines in correlation with the SA expression level. This was further verified by enzymatic cleavage of SA and by staining using a FITC labeled SA selective lectin.