A mechanical, electrical dual autonomous self-healing multifunctional composite hydrogel

The versatile properties make hydrogels a potential multipurpose material that finds wide applications. However, the preparation of multipurpose hydrogels is very challenging. Here, we report a method based on free radical reaction and composite mechanisms to prepare mechanical and electrical self-healing multifunctional hydrogels. In this study, the introduction of imidazolium salt ionic liquids and glycerol in the hydrogel system endows the gels with good antibacterial, conductive, and adhesive properties and excellent antifreeze properties. The testing results show that the as-prepared hydrogel has stable mechanical and electrical properties even under the extremely cold condition of -50°C after self-healing. Moreover, the active esters formed in the dynamic radical reaction have better reducibility, thus further investing the as-prepared hydrogel with high antioxidant activity. The application results show that these comprehensive properties make such hydrogel system very useful in wound repair and wearable strain sensors.

Realization of Large Scale, 2D van der Waals Heterojunction of SnS2 /SnS by Reversible Sulfurization

2D van der Waals heterojunction provides an attractive opportunity for realizing novel electronic or optoelectronic devices. It remains challenging to realize high-quality heterostructures through scalable methods such as molecular epitaxy growth (MBE). Here, growth of few-layer SnS thin films is reported on mica and Nb-doped SrTiO₃ (100) substrates by MBE. Then the top layer of SnS film is uniformly sulfurized to monolayer SnS₂ in a sulfur atmosphere, resulting in a high-quality SnS₂ /SnS 2D heterojunction. Furthermore, the SnS₂ layer can be recovered to SnS by annealing SnS₂ /SnS without sulfur supply, indicating the heterojunction formation is reversible. The scanning tunneling spectroscopy measurements on SnS₂ /SnS heterostructure indicate the type-II band alignment in SnS₂ /SnS. The work provides a promising approach to construct artificial 2D heterojunctions with desired properties, which could be extended to other sulfide and selenide systems.

Current practices of Western Australian general dentists regarding management of patients on anticoagulant/antiplatelet therapy

PURPOSE

Currently, there are little to no published studies outlining general dentists' knowledge in the management of patients on anticoagulant/antiplatelet therapies in Australia. The aim of this study was to investigate the current practices of Western Australian (WA) general dentists with regards to dental management of patients taking anticoagulants/antiplatelets.

MATERIALS AND METHODS

WA dentists were invited to undertake a survey to investigate their knowledge on the management of patients taking anticoagulant/antiplatelet. The questionnaire provided to WA general dentists consisted of pre-extraction advice on patients (direct oral anticoagulants [DOACs], antiplatelets, warfarin, dual antiplatelets and antiplatelet/anticoagulant). Results were analysed using descriptive statistics as well as chi-square tests.

RESULTS

Of the 89 participants, 40.5% had <5 years of general dental experience. Most WA general dentists (64%-71%) responded with 'no change' when performing extractions on patients on DOACs, antiplatelet therapy, warfarin, dual antiplatelets and antiplatelets/anticoagulants (P = 0.00). Furthermore, dentists with 6-10 years of experience were more likely to cease antiplatelet for 24 h before extractions (P < 0.05). Dentists who extracted 10-30 teeth per month were likely to stop antiplatelets and DOACs for more than 48 h compared to other groups (P < 0.05).

CONCLUSION

Most WA dentists would not cease anticoagulant/antiplatelet therapy when undergoing dental extractions.

Identification of Thioflavin T Binding Modes to DNA: A Structure-Specific Molecular Probe for Lasing Applications

The binding mechanism of thioflavin T (ThT) to DNA was studied using polarized light spectroscopy and fluorescence-based techniques in solutions and in solid films. Linear dichroism measurements showed that ThT binds to DNA duplex by intercalation. Time-resolved fluorescence studies revealed a second binding mode which is the external binding to the DNA phosphate groups. Both binding modes represent the nonspecific type of interactions. The studies were complemented with the analysis of short oligonucleotides having DNA cavities. The results indicate that the interplay between three binding modes-intercalation, external binding, and binding inside DNA cavities-determines the effective fluorescence quantum yield of the dye in the DNA structures. External binding was found to be responsible for fluorescence quenching because of energy transfer between intercalated and externally bound molecules. Finally, amplified spontaneous emission (ASE) was successfully generated in the ThT-stained films and used for detecting different DNA structures. ASE measurements show that ThT-stained DNA structures can be used for designing bioderived microlasers.

POS0262 IDENTIFYING EROSIVE DISEASE FROM RADIOLOGY REPORTS OF VETERANS WITH INFLAMMATORY ARTHRITIS USING NATURAL LANGUAGE PROCESSING

Background:

The presence of erosive disease influences diagnosis, management, and prognosis in inflammatory arthritis (IA).Research of IA in large datasets is limited by a lack of methods for identifying erosions.

Objectives:

To develop methods for identifying articular erosions in radiology reports from veterans with IA.

Methods:

Included veterans had ≥2 ICD codes for ankylosing spondylitis (AS), psoriatic arthritis (PsA), or rheumatoid arthritis (RA) between 2005- 2019, in Veterans Affairs Corporate Data Warehouse. Chart review & annotation of radiology notes produced the reference standard, & identified erosion terms that informed classification rule development. A rule-based natural language processing (NLP) model was created & revised in training snippets. The NLP method was validated in an independent reference sample of IA patients at the snippet & patient levels

StepDescriptionNumber & example1 Radiology notesa.Select note titles potentially relevant to IAa. 35,141 notes titlesb.Extract notes with titles potentially related to IAb. 2,926,113 radiology notes2 Possible meaningful termsa.Compile list of root terms that may indicate erosiona. 11 root terms (i.e. ero*, pencil*cup, irreg*)b.Query radiology notes for root term variationsb. 1178 variations (i.e. erosion, erotic, erode)c.Select possible meaningful termsc. 179 possible terms (i.e. erosion, erode)3 Annotationa.Extract snippets^ containing possible meaningful termsa.5000 snippets from radiology notesb.Classify snippets according to: 1) Meaningful term, 2) Relevance to joint, 3) Attribution to IA, 4) Affirmationb.4068 classifications with 1017 snippets (in rounds of 50-417 snippets for NLP training & testing)4 Rule developmenta.Identify meaningful terms representing erosiona. 6 terms (pencil * cup, erosion, erosive, etc.)b.Exclude erosive processes irrelevant to joint(s)b. 28 irrelevant processes (i.e. gastric erosion)c. Exclude articular erosive processes not attributed to IAc. 5 non-IA processes IA (i.e. infection)d. Classify as affirmed/negated (erosion present/absent)d. 83 affirmation/negation rules5 NLP trainingDesign & revise NLP model until accuracy ≥90%6 rounds, 817 snippets (AS 417, RA 200, PsA 200)6 NLP testingTest NLP model200 snippets (AS 100, RA 50, PsA 50)7 Pt classificationa. Develop rules for classifying pts with discordant snippetsa. 5 rules developed in 368 ptsb. Build reference sample (pts classified as erosive or non-erosive via chart review)b. 30 IA pts (10 AS, 10 RA, 10 PsA)8 NLP validationValidate NLP model in reference sample at snippet level149 snippets (29 AS, 76 RA, 44 PsA)9 Method validationValidate methods (NLP+pt classification) at pt level30 IA pts (reference sample)

pt= patient. ^Snippets include text containing 30 words before & after meaningful terms

Results:

In 168,667 veterans with IA, the mean age was 63.1 & 90.3% were male. Method development involved radiology note & erosion term selection, rule development, NLP model building, & method validation. The NLP model accuracy was 94.6% at the snippet level & 90.0% at the patient level, for all IA patients.

Accuracy of methods.

Conclusion:

The methods accurately identify erosions from radiology reports of veterans with IA. They may facilitate a broad range of research involving cohort identification & disease severity stratification

References:

[1]Walsh JA, et al. J Rheumatol. 2020;47(1):42-49

Disclosure of Interests:

Gopi Penmetsa: None declared, Shaobo Pei: None declared, Brian Sauer Grant/research support from: I have been an investigator on research contracts supported by Abbvie., Jessica A. Walsh Consultant of: AbbVie, Amgen, Janssen, Lilly, Novartis, Pfizer, UCB, Grant/research support from: AbbVie, Merck, Pfizer, Bingjian Feng Grant/research support from: Bing-Jian Feng reports funding and sponsorship to his institution on his behalf from Pfizer Inc., Regeneron Genetics Center LLC, and Astra Zeneca (UK). The PERCH software, for which Bing-Jian Feng is the inventor, has been non-exclusively licensed to Ambry Genetics for clinical genetic testing services and research., Jodi Walker Shareholder of: Abbvie and mutual funds containing various pharmaceutical companies, Employee of: Abbvie, Kevin Douglas Shareholder of: employed by Abbvie, Employee of: employed by Abbvie, Jerry Clewell Shareholder of: Own Abbvie Shares and mutual funds that hold pharmaceutical and other health care stocks, Employee of: I am current Abbvie Inc employee and past employee of Eli Lilly co

[Value of gadolinium ethoxybenzyl diethylenetriamine pentaacetic acid enhanced magnetic resonance imaging and diffusion-weighted MR imaging in predicting microvascular invasion in hepatocellular carcinoma and the prognostic significance]

Objective: To investigate the combined value of gadolinium ethoxybenzyl diethylenetriamine pentaacetic acid (Gd-EOB-DTPA) enhanced magnetic resonance imaging (MRI) and diffusion-weighted imaging (DWI) in predicting pathological microvascular invasion (pMVI) preoperatively, and to determine the relationship between prediction results and prognosis in hepatocellular carcinoma (HCC) patients. Methods: A total of 181 newly diagnosed HCC patients were enrolled in this study. Imaging characteristics and the apparent diffusion coefficient (ADC) value of DWI were analyzed. The differences of imaging characteristics and ADC values between different pMVI groups were analyzed.Multivariate logistic regression and receiver operating characteristic (ROC) curve were used to analyze the value for pMVI prediction by using significant parameters. The patients were grouped based on MRI predicted MVI (mrMVI), and the relationship between mrMVI and recurrence free survival time (RFS) was analyzed. Results: Fifty-one patients were pMVI positive and 130 patients were pMVI negative. The ADC value in pMVI positive group were (1.10±0.17)×10(-3) mm(2)/s, significantly lower than (1.27±0.22)×10(-3) mm(2)/s of pEMVI negative group (P<0.001). The incidence rates of incomplete enhancing "capsule" , non-smooth tumor margin, arterial peritumoral enhancement, mosaic architecture and peritumoral hypointensity on hepatobiliary phase (HBP) in pMVI positive group were significantly higher than those of negative group (all P<0.05). Multivariate logistic regression analysis showed that tumor margin, arterial peritumoral enhancement, peritumoral hypointensity on HBP and ADC value were independently associated with pMVI. ROC analysis showed that the area under curve, sensitivity and specificity of pMVI predicted by combined parameters were 0.830, 76.5% and 81.5%, respectively. The median RFS of mrMVI positive group was 23.6 months, significantly lower than 38.2 months of mrEMVI negative group (P=0.004). Conclusion: Tumor margin, arterial peritumoral enhancement, peritumoral hypointensity on HBP and ADC value are independent predictors of pMVI in HCC, and mrMVI is related with RFS.

[An investigation of musculoskeletal disorders at multiple sites and related influencing factors among workers in an automobile assembly shop]

Objective: To investigate the current status of work-related musculoskeletal disorders (WMSDs) in automobile assembly workers, as well as the distribution of WMSDs at multiple sites and related influencing factors. Methods: From March to July 2019, cluster sampling was performed to select 663 male automobile assembly workers as respondents, and the musculoskeletal injury questionnaire was used to investigate their general status and working condition. A multinomial logistic regression analysis was used to analyze the influencing factors for WMSDs at multiple sites. Results: The detection rate of WMSDs within the past 7 days was 37.9% (251/663) among the automobile assembly workers, and the detection rate of WMSDs within the past 1 year was 51.9% (344/663) . Of all workers, 13.6% (90/663) had WMSDs involving only 1 site, while 38.3% (254/663) had WMSDs involving 2 or more sites. The multinomial logistic regression analysis showed that frequent turns during work was a risk factor for WMSDs involving 1-3, 4-6, and 7-9 sites (odds ratio [OR]=1.65, 2.47, and 3.65, respectively) . Repeated action of lower extremities and ankles was a risk factor for WMSDs involving 4-6 and 7-9 sites (OR=2.15 and 2.98, respectively) . Working in an uncomfortable position was a risk factor for WMSDs involving 1-3, 4-6, and 7-9 sites (OR=1.95, 2.67, and 3.04, respectively) . Prolonged standing during work was a risk factor for WMSDs involving 1-3 and 4-6 sites (OR= 1.87 and 1.79, respectively) . Working overtime was a risk factor for WMSDs involving 7-9 sites (OR=5.48) . Adequate time for rest was a protective factor against WMSDs involving 1-3 and 4-6 sites (OR=0.50 and 0.31, respectively) . Conclusion: There is a high detection rate of WMSDs in automobile assembly workers, and WMSDs at multiple sites are more common than WMSDs at a single site. Poor position and organizational management factors are risk factors for occupational WMSDs at multiple sites.

Computational Modeling of Mouse Colorectum Capturing Longitudinal and Through-thickness Biomechanical Heterogeneity

Mechanotransduction, the encoding of local mechanical stresses and strains at sensory endings into neural action potentials at the viscera, plays a critical role in evoking visceral pain, e.g., in the distal colon and rectum (colorectum). The wall of the colorectum is structurally heterogeneous, including two major composites: the inner consists of muscular and submucosal layers, and the outer consists of circular muscular, intermuscular, longitudinal muscular, and serosal layers. In fact the colorectum presents biomechanical heterogenity across both the longitudinal and through-thickness directions thus highlighting the differential roles of sensory nerve endings within different regions of the colorectum in visceral mechanotransduction. We determined constitutive models and model parameters for individual layers of the colorectum from three longitudinal locations (colonic, intermediate, and distal) using nonlinear optimization to fit our experimental results from biaxial extension tests on layer-separated colorectal tissues (mouse model, 7×7 mm2, Siri et al., Am. J. Physiol. Gastrointest. Liver Physiol. 316, G473-G481 and 317, G349-G358), and quantified the thicknesses of the layers. In this study we also quantified the residual stretches stemming from separating colorectal specimens into inner and outer composites and we completed new pressure-diameter mechanical testing to provide an additional validation case. We implemented the constitutive equations and created two-layered, 3-D finite element models using FEBio (University of Utah), and incorporated the residual stretches. We validated the modeling framework by comparing FE-predicted results for both biaxial extension testing of bulk specimens of colorectum and pressure-diameter testing of bulk segments against corresponding experimental results independent of those used in our model fitting. We present the first theoretical framework to simulate the biomechanics of distal colorectum, including both longitudinal and through-thickness heterogeneity, based on constitutive modeling of biaxial extension tests of colon tissues from mice. Our constitutive models and modeling framework facilitate analyses of both fundamental questions (e.g., the impact of organ/tissue biomechanics on mechanotransduction of the sensory nerve endings, structure-function relationships, and growth and remodeling in health and disease) and specific applications (e.g., device design, minimally invasive surgery, and biomedical research).

MULTIPHYSICS MODELING OF PRECURSORS IN MOLTEN SALT FAST REACTORS USING PROTEUS AND Nek5000

The goal of this work was to calculate the impact of the delayed neutron precursor drift in fast spectrum Molten Salt Reactors (MSRs) using coupled solutions from the neutronics code PROTEUS and the computational fluid dynamics code Nek5000. Specifically, using a multiphysics approach to solve the effective delayed neutron fraction (βeff) or delayed neutron precursor distribution for reactors with flowing fuel salts would provide valuable information for transient simulations and safety assessments. Given the multiple options for the flux solution and geometric resolution/fidelity in PROTEUS, two approaches were developed and applied to various test cases: PROTEUS-NODAL/Nek5000 and PROTEUS-SN/Nek5000. For the former, the precursors are tracked in the built-in precursor drift model in PROTEUS-NODAL, whereas in the latter, Nek5000 directly tracks the precursors. Both approaches were used to solve a single test channel problem and showed excellent agreement in the calculated βeff. Separately, a 3D hourglass-shaped core was modeled using the PROTEUS-SN/Nek5000 approach. This problem was designed to demonstrate the capability of the discrete ordinates (SN) solver and Nek5000 to model complex core designs with axially varying geometries and the ability for Nek5000 to track the precursors and calculate the resulting βeff. In addition, the Nek5000 calculations revealed the presence of recirculation zones in the hourglass design, which could lead to significant temperatures in the fuel salt and surrounding materials. These first coupled solutions show why these approaches may be necessary for not only predicting the precursor drift effect in fast MSRs but also for reactor design and performance assessments.

Application of sensitivity analysis in DYMOND/Dakota to fuel cycle transition scenarios

The ability to perform sensitivity analysis has been enabled for the nuclear fuel cycle simulator DYMOND through its coupling with the design and analysis toolkit Dakota. To test and demonstrate these new capabilities, a transition scenario and multi-parameter study were devised. The transition scenario represents a partial transition from the US nuclear fleet to a closed fuel cycle with small modular LWRs and fast reactors fueled by reprocessed used nuclear fuel. Four uncertain parameters in this transition were studied – start date of reprocessing, total reprocessing capacity, the nuclear energy demand growth, and the rate at which the fast reactors are deployed – with respect to their impact on four response metrics. The responses – total natural uranium consumed, maximum annual enrichment capacity required, total disposed mass, and total cost of the nuclear fuel cycle – were chosen based on measures known to be of interest in transition scenarios [2] and to be significantly impacted by the varying parameters. Analysis of this study was performed both from the direct sampling and through surrogate models developed in Dakota to calculate the global sensitivity measures Sobol’ indices. This example application of this new capability showed that the most consequential parameter to most metrics was the share of new build capacity that is fast reactors. However, for the cost metric, the scaling factor of the energy demand growth was significant and had synergistic behavior with the fast reactor new build share.

MSRE TRANSIENT BENCHMARKS USING SAM

In recent years, there has been renewed interest in Molten Salter Reactors (MSRs) for their potential advantages compared to reactors that rely on solid fuel. In response to such interest, the System Analysis Module (SAM) was enhanced to include MSR-specific modeling features including a delayed neutron precursor drift model and a modified point kinetics model. This paper discusses the validation of these features using the experiments conducted in the Molten Salt Reactor Experiment (MSRE). These experiments include the pump start-up and coast-down tests at zero power and a thermal convection test. For the zero power tests, the change in pump speeds induces flow rate changes in the core that impact the precursor concentrations. This introduces a neutron imbalance and requires the adjustment of the control rods to counter-balance this effect. SAM was used to evaluate the precursor concentration in the core as a function of time, and the resulting changes in reactivity were evaluated through the modified point kinetics equation. The results show good agreement with the experimental data. It should be noted that the pump performance curve used in this analysis was re-constructed based on the initial water test data of the fuel pump. The steady-state pump curve is assumed to be applicable to transient flow operations. The thermal convection test was conducted by shutting off the pumps, reducing the inlet core temperature for 360 minutes, and allowing the power to be adjusted by the inherent feedbacks of the system. The power level during this transient was evaluated by SAM as a function of time.

[Application value of urinary IGFBP7 and TIMP-2 in acute kidney injury with decompensated hepatitis B virus-related liver cirrhosis]

Objective: To investigate the application value of new urinary biomarkers insulin-like growth factor binding protein 7 (IGFBP7) and tissue matrix metalloproteinase inhibitor-2 (TIMP-2) in acute kidney injury with decompensated hepatitis B virus-related liver cirrhosis. Methods: 45 newly hospitalized cases with decompensated hepatitis B virus-related liver cirrhosis were selected. Among them, 19 cases were combined with AKI on admission (cirrhosis-AKI group), 26 cases without AKI (cirrhosis-non-AKI group), and 12 healthy cases (normal control group). First-morning urine samples were collected and IGFBP7 and TIMP-2 were detected by enzyme-linked immunosorbent assay (ELISA). Urinary IGFBP7 and serum creatinine (SCr) were dynamically monitored after hospitalization in cirrhosis-non-AKI group. Normally distributed measurement data were compared by t-test, and non-normally distributed measurement data were compared by rank sum test. The receiver operating characteristic (ROC) curve and area under the curve (AUC) were used to evaluate the diagnostic accuracy of the indicators. Results: Urinary IGFBP7, IGFBP7 with TIMP-2 (IGFBP7×TIMP-2) in cirrhosis-AKI group (n = 19) were equally higher than that of the cirrhosis-non-AKI group (P < 0.05). Urinary IGFBP7, TIMP-2 and IGFBP7×TIMP-2 in cirrhosis-AKI group or cirrhosis-non-AKI group were significantly higher than those of the normal control group (P < 0.01). The AUC of urinary IGFBP7 and urinary IGFBP7×TIMP-2 for diagnosis of AKI were 0.703 (95% CI 0.547-0.860) and 0.700 (95% CI 0.541-0.859), respectively. In the liver cirrhosis-non-AKI group (n = 26), 5 cases of AKI were newly diagnosed according to the changes in SCr during hospitalization (progressive group). Urinary IGFBP7 was significantly increased 2 days before the diagnosis of AKI. The concentration of urinary IGFBP7 at admission in the progressive group (n = 5) was higher than that of the non-progressive group (n = 21) (P < 0.05). Conclusion: Urinary IGFBP7 and TIMP-2 concentrations were significantly increased in patients with decompensated hepatitis B virus-related liver cirrhosis. When AKI occurred, urinary IGFBP7 and IGFBP7×TIMP-2 was further increased. Urinary IGFBP7 is valuable for early AKI diagnosis, and may play a role in predicting AKI occurrence.

Realization of Regular-Mixed Quasi-1D Borophene Chains with Long-Range Order

The polymorphism of borophene makes it a promising system to realize tunable physical or chemical properties. Various pure borophene phases consisting of quasi-1D boron chains with different widths have been commonly obtained in experimental studies. Here, it is shown that, due to a substrate mediation effect, artificial long-range ordered phases of borophene consisting of different combinations of boron chains seamlessly joined together can be achieved on Ag(100). Scanning tunneling microscopy measurements and theoretical calculations reveal that mixed-chain phases are more stable than the pure phase, and interact only weakly with the substrate. The mixed-chain phases with various proportions of different chains can be well separated based on the crystal direction of the substrate. The successful growth of mixed-chain phases is expected to deepen the impact of substrate tailored synthesis of borophene.

The acquisition of Mycobacterium tuberculosis infection in village doctors in China: a prospective study

BACKGROUND: Occupational exposure-related risk of Mycobacterium tuberculosis infection has been reported for village doctors in China. This prospective study aims to estimate the infection acquisition in this key population.METHODS: At baseline, all village doctors registered in Zhongmu County were tested by QuantiFERON^®-TB Gold In-Tube (QFT) and QuantiFERON^®-TB Gold Plus (QFT-Plus) in parallel. Those negatives for either of the tests were retested to identify conversions at the 2-year follow-up investigation.RESULTS: A total of 367 eligible participants completed the 2-year follow-up survey with frequency of conversion of 5.0% (18/361) for QFT and 6.1% (21/343) for QFT-Plus. The agreement of follow-up results between the tests was 93.2% with a κ coefficient of 0.43 (95%CI 0.20-0.65). Among QFT-Plus convertors, the difference between TB1 and TB2 tubes (TB2-TB1) was significantly increased as compared with baseline results (P = 0.039). Participants from the villages with occurrence of microbiologically confirmed pulmonary TB showed higher frequency of QFT conversions (11.0% vs. 3.2%, P = 0.011) and QFT-Plus conversions (12.3% vs. 4.4%, P = 0.027) than those from the villages without occurrence.CONCLUSION: Our results consistently suggest that capability on occupational protection and M. tuberculosis infection control should be improved in village doctors in China.

[Investigation on occupational hazards in a refrigeration equipment manufacturing enterprise]

Objective: To investigate the distribution and intensity of noise and ultraviolet radiation of welding posts in a refrigeration equipment manufacturing enterprise, in conjunction with the health status of welding workers, providing scientific evidence for the prevention and control of occupational diseases in this type of post. Methods: In May 2019, a cross-sectional survey method was used to select 576 welding workers in the pressure vessel workshop and the unit assembly workshop of a refrigeration complete equipment manufacturer from 2016 to 2018 as the research objects. The occupational hygiene survey and occupational hazard factor measurement were carried out in the workplace, and the measurement data and occupational health examination results were statistically analyzed. Results: The over standard rate of individual Lex in pressure vessel workshop was 82.2% (37/45) . Compared with the unit assembly workshop, the individual Lex of welding workers in pressure vessel workshop was higher than that in unit assembly workshop (t=13.43, P= 0.00) ; the effective irradiance exceeding rate of welding workers in pressure vessel workshop and unit assembly workshop was 33.3% (4/12) and 25.0% (3/12) , The meacurement of ovradiation in the moskment the occupational exposure limit. The deaf rate and hearing loss rate in pressure vessel workshop were 1.5% (5/336) 20.5% (69/336) , respectively, significantly higher than that in umit assembly workshop (P<0.05) . The detection rate of hearing loss of pressure vessel workshop workers increased year by year, and the difference was statistically significant (χ(2trend)=22.42, P<0.01) ; compared with the unit assembly workshop from 2016 to 2018, the detection rates of lens opacity, corneal cloudiness and hearing loss of pressure vessel workshop workers were statistically significant (χ(2)=9.45, 14.80, 55.99, P<0.01) . Conclusion: Welding workers exposed to noise and ultraviolet radiation are easy to be ignored. The enterprise management department should attach great importance to it and take comprehensive measures to protect the health of welding workers.

Protective effects of gliclazide on high glucose and AGEs-induced damage of glomerular mesangial cells and renal tubular epithelial cells via inhibiting RAGE-p22phox-NF-kB pathway

OBJECTIVE

Gliclazide is one of the most widely used therapeutic drugs for diabetes. As a second-generation sulfonylurea oral hypoglycemic drug, it can lower blood glucose level and delay the occurrence and development of diabetic nephropathy (DN). However, the underlying mechanism remains unclear. Therefore, the aim of this study was to explore whether gliclazide had protective effects on high glucose and advanced glycation end products (AGEs)-induced injury of human mesangial cells (HMCs) and renal tubular epithelial cells.

MATERIALS AND METHODS

HMC and renal tubular epithelial cell lines [human kidney 2 (HK-2)] were cultured in vitro. All cells were then divided into the follow groups: 1) blank control group (5.6 mmol/L glucose), 2) AGEs group [400 μg/mL AGE-bovine serum albumin (AGE-BSA)], 3) high glucose group (25 mmol/L glucose), 4) gliclazide + AGEs group (400 μg/mL AGE-BSA + 20 μmol/L gliclazide) and 5) gliclazide + high glucose group (25 mmol/L glucose + 20 μmol/L gliclazide). Cell counting kit-8 (CCK-8) assay was adopted to determine cell viability. Flow cytometry was used to detect cell apoptosis. The levels of malondialdehyde (MDA), superoxide dismutase (SOD) and glutathione peroxidase (GSH-Px) were measured as well. Furthermore, the mRNA expressions of receptor for AGE (RAGE), p22phox and nuclear factor kappa-light-chain-enhancer of activated B cells (NF-κB) were measured via fluorescence quantitative Real-time polymerase chain reaction (qRT-PCR).

RESULTS

Compared with control group, significantly accelerated apoptosis of HMCs and HK-2, increased MDA level, decreased SOD and GSH-Px levels, and up-regulated mRNA expressions of RAGE, p22phox and NF-κB were observed in HMCs and HK-2 of high glucose group and AGEs group. Meanwhile, there were obviously alleviated apoptosis of HMCs and HK-2, decreased MDA level, increased SOD and GSH-Px levels, as well as down-regulated mRNA expressions of RAGE, p22phox and NF-κB in HMCs and HK-2 of gliclazide group compared with high glucose and AGEs group. Furthermore, significant correlations were found between the mRNA expression of RAGE and the apoptosis rate of HMCs and HK-2 (HMCs: r=0.701, p=0.004 and HK-2: r=0.633, p=0.011).

CONCLUSIONS

Gliclazide has protective effects on high glucose and AGEs-induced damage of glomerular mesangial cells and renal tubular epithelial cells via inhibiting RAGE-NADPH oxidase-NF-kB pathway.

Clinical effectiveness of 3 days preoperative treatment with recombinant human erythropoietin in total knee arthroplasty surgery: a clinical trial

AIMS

The purpose of study is to evaluate the effect and complication of preoperative short-term daily recombinant human erythropoietin (rhEPO) treatment for blood-saving in patients undergoing unilateral primary total knee arthroplasty (TKA).

METHODS

This three-arm randomized clinical trial compared three different rhEPO-based treatment protocols for unilateral primary TKA. Group A: application of daily doses of rhEPO combined with iron supplement starting 3 days before surgery; Group B: application of daily doses of rhEPO combined with iron supplement starting the day of surgery; Group C: iron supplement alone. Perioperative hemoglobin (Hb) level gaps, total perioperative blood loss, reticulocyte levels and treatment-related complications were studied.

RESULTS

A total of 102 patients were included (35, 35 and 32 patients in Groups A, B and C, respectively). Total blood loss (TBL) in Groups A, B and C was 490.84, 806.76 and 924.21 ml, respectively. Patients in Group A had a significant lower TBL than Groups B and C (A vs. B: P = 0.010; A vs. C: P < 0.001). There was no difference as for TBL between Groups B and C (P = 0.377). Group A patients had significant smaller Hb decline than Group C on the third and fifth postoperative day (P = 0.049, P = 0.037), as well as than Group B on the fifth postoperative day (P = 0.048). There was no difference as for Hb decline between Groups B and C. No difference was shown in levels of inflammatory biomarkers or blood-saving protocol-related complications among three groups.

CONCLUSIONS

Daily dose of rhEPO combined with iron supplement administered 3 days before TKA procedures could significantly decrease perioperative blood loss and improve postoperative Hb levels, without significantly elevating risks of complication, when compared with admission of rhEPO on the day of surgery and iron supplement alone. Preoperative daily rhEPO treatment could be a more effective blood-saving protocol in TKA procedures.

Surface-state Coulomb repulsion accelerates a metal-insulator transition in topological semimetal nanofilms

The emergence of quantization at the nanoscale, the quantum size effect (QSE), allows flexible control of matter and is a rich source of advanced functionalities. A QSE-induced transition into an insulating phase in semimetallic nanofilms was predicted for bismuth a half-century ago and has regained new interest with regard to its surface states exhibiting nontrivial electronic topology. Here, we reveal an unexpected mechanism of the transition by high-resolution angle-resolved photoelectron spectroscopy combined with theoretical calculations. Anomalous evolution and degeneracy of quantized energy levels indicate that increased Coulomb repulsion from the surface states deforms a quantum confinement potential with decreasing thickness. The potential deformation strongly modulates spatial distributions of quantized wave functions, which leads to acceleration of the transition beyond the original QSE picture. This discovery establishes a complete picture of the long-discussed transition and highlights a new class of size effects dominating nanoscale transport in systems with metallic surface states.

A multi-layered model of human skin elucidates mechanisms of wrinkling in the forehead

Skin wrinkling, especially in the facial area, is a prominent sign of aging and is a growing area of research aimed at developing cosmetics and dermatological treatments. To better understand and treat undesirable skin wrinkles, it is vitally important to elucidate the underlying mechanisms of skin wrinkling, a largely mechanical process. Human skin, a multi-layer composite, has six mechanically distinct layers: from the outermost inward they are the stratum corneum, viable epidermis, dermal-epidermal-junction, papillary dermis, reticular dermis, and hypodermis. To better address the through-thickness hierarchy, and the development of wrinkling within this complicated hierarchy, we established a six-layered model of human skin realized with finite element modeling, by leveraging available morphological and biomechanical data on human skin of the forehead. Exercising our new model we aimed to quantify the effects of three potential mechanisms of wrinkle formation: (1) skin compression due to muscle contraction (dynamic wrinkles); (2) age-related volumetric tissue loss (static wrinkles); and (3) the combined effects of both mechanisms. Since hydration of the stratum corneum significantly affects its stiffness we also aimed to quantify the influence its hydration with these three potential mechanisms of wrinkle formation. Our six-layered skin model, combined with the proposed wrinkling mechanisms, successfully predicts the formation of dynamic and static wrinkles in the forehead consistent with the experimental literature. We observed three wrinkling modes in the forehead where the deepest wrinkles could reach to the reticular dermis. With further refinement our new six-layered model of human skin can be applied to study other region-specific wrinkle types such as the "crow's feet" and the nasolabial folds.

Dynamic changes of interferon gamma release assay results with latent tuberculosis infection treatment

OBJECTIVES

Using QuantiFERON-TB Gold In-Tube (QFT-GIT) for monitoring tuberculosis (TB) and latent TB infection treatment effect is controversial. The present study aimed to evaluate the dynamic changes of interferon gamma (IFN-γ) levels along with latent TB infection treatment via a randomized controlled study.

METHODS

A total of 910 participants treated with 8 weeks of once-weekly rifapentine plus isoniazid (group A), 890 treated with 6 weeks of twice-weekly rifapentine plus isoniazid (group B) and 818 untreated controls (group C) were followed for 2 years to track active TB development. QFT-GIT tests were repeated three times for all groups: before treatment (T0), at completion of treatment (T1) and 3 months after completion of treatment (T2).

RESULTS

Similar rates of persistent QFT-GIT reversion were observed in groups A (19.0%, 173/910), B (18.5%, 165/890) and C (20.7%, 169/818) (p 0.512). The dynamic changes of IFN-γ levels were not statistically significant among the three groups. In treated participants, individuals with higher baseline IFN-γ levels showed increased TB occurrence (1.0%, 9/896) compared to those with lower baseline levels (0.2%, 2/904) (p 0.037). A similar but statistically insignificant trend was also observed in untreated controls (1.8% (7/400) vs. 0.5% (2/418), p 0.100). When TB cases were matched with non-TB cases on baseline IFN-γ levels, no significant differences were found with respect to the dynamic changes in IFN-γ levels with time, regardless of whether they received treatment.

CONCLUSIONS

QFT-GIT reversion or decreased IFN-γ levels should not be used for monitoring host response to latent TB infection treatment.

[Spectrum analysis of pathological classification in 463 cases with nasal and paranasal sinuses malignant tumors]

Objective:The characteristics of pathological histological classification of nasal and paranasal sinuses malignant tumors in the past 10 years were analyzed, so as to provide possible basis, direction and ideas for the development of relevant effective treatment measures for nasal and paranasal sinuses malignant tumors in clinical practice. Method:The clinical data of patients with nasal and paranasal sinuses malignant tumors admitted to PLA general hospital from January 2009 to December 2018 were collected. Pathological types were retrospectively analyzed, and disease spectrum distribution, composition ratio and variation tendency of these patients were calculated. Result:Among the 463 patients, the overall pathological types in the top 5 were as follows: squamous cell carcinoma, adenoid cystadenocarcinoma, olfactory neuroblastoma, melanoma, adenocarcinoma. As for male patients, the pathological types in the top 5 were squamous cell carcinoma, adenoid cystic carcinoma, olfactory neuroblastoma, adenocarcinoma, neuroendocrine carcinoma and rhabdomyosarcoma were tied for fifth; the top 5 most common pathological types in female patients were squamous cell carcinoma, adenoid cystic carcinoma, melanoma, rhabdomyosarcoma, and adenocarcinoma. From 2009 to 2013, there were 183 patients with nasal and paranasal sinuses malignant tumors, the top 5 pathological types were squamous cell carcinoma, adenoid cystadenocarcinoma, olfactory neuroblastoma, melanoma, neuroendocrine carcinoma and rhabdomyosarcoma were tied for fifth; From 2014 to 2018, 280 patients with nasal and paranasal sinuses malignant tumors were diagnosed, the top 5 pathological types were squamous cell carcinoma, adenoid cystadenocarcinoma, melanoma, adenocarcinoma, and rhabdomyosarcoma. The ratio of the number of patients from 2009 to 2013 and 2014 to 2018 was about 0.65∶1. Malignant tumors of the nasal and paranasal sinuses tend to occur between the ages of 41 and 60, and the pathological types in the top 5 were squamous cell carcinoma,adenoid cystic carcinoma, adenocarcinoma, melanoma, neuroendocrine carcinoma. Conclusion:Malignant tumors of nasal cavity and sinus were more common in male, and the pathological types such as squamous cell carcinoma, adenoid cystic carcinoma, olfactory neuroblastoma were more common. All age groups have the disease, but the age group of 41-60 years old is the high-risk group of nasal and nasal sinus malignant tumors. However, the incidence rate of melanoma has gradually increased in the past five years, which needs to be paid more attention to.

Dynamics of Single-Molecule Dissociation by Selective Excitation of Molecular Phonons

Breaking bonds selectively in molecules is vital in many chemistry reactions and custom nanoscale device fabrications. The scanning tunneling microscope (STM) has proved to be an ideal tool to initiate and view bond-selective chemistry at the single-molecule level, offering opportunities for the further study of the dynamics in single molecules on metal surfaces. We demonstrate H─HS and H─S bond breaking on Au(111) induced by tunneling electrons using low-temperature STM. An experimental study combined with theoretical calculations shows that the dissociation pathway is facilitated by vibrational excitations. Furthermore, the dissociation probabilities of the two different dissociation processes are bias dependent due to different inelastic-tunneling probabilities, and they are also closely linked to the lifetime of inelastic-tunneling electrons. Combined with time-dependent ab initio nonadiabatic molecular dynamics simulations, the dynamics of the injected electron and the phonon-excitation-induced molecule dissociation can be understood at the atomic scale, demonstrating the potential application of STM for the investigation of excited-state dynamics of single molecules on surfaces.