Templated Assembly of Pore-forming Peptides in Lipid Membranes

Pore-forming peptides are of interest due to their antimicrobial activity and ability to form gateways through lipid membranes. Chemical modification of these peptides makes it possible to arrange several peptide monomers into well-defined pore-forming structures using various templating strategies. These templated super-structures can exert antimicrobial activity at significantly lower total peptide concentration than their untemplated equivalents. In addition, the chemical moieties used for templating may be functionalized to interact specifically with targeted membranes such as those of pathogens or cancer cells. A range of molecular templates has been explored, including dimerization of pore-forming monomers, their covalent attachment to cyclodextrin, porphyrin or fullerene scaffolds as well as attachment of amino acid linkers or nucleic acid constructs to generate assemblies of 4 to 26 peptides or proteins. Compared to free peptide monomers, templated pore assemblies showed increased membrane affinity, prolonged open-state lifetimes of the pores and more frequent pore formation due to higher local concentration. These constructs are useful model systems for biophysical studies to understand porin and ion channel proteins and their mechanisms of insertion into lipid membranes. Recently designed DNA-templates are expanding the usefulness of templated pore assemblies beyond applications of cell killing and may include targeted drug delivery and accelerate the emerging field of single-molecule detection and characterization of biomolecules by nanopore-based resistive pulse sensing.

The plasmonic properties of gold nanoparticle clusters formed via applying an AC electric field

An external electric AC field with a field strength ranging from 10 V mm-1 to 30 V mm-1 and a frequency ranging from 0.1 kHz to 1 MHz was applied to suspensions of gold nanoparticles (Au NPs) to control their plasmonic properties. Apparent differences in the UV-vis spectra of the Au NPs were observed between the spectra with and without the field application. The characteristic red color of the Au NP suspension darkened; this suggested that the application of the AC field caused the aggregation of the Au NPs. In addition, the sizes of the Au NP clusters in suspension formed by the AC field application depended on the frequency of the applied field. The surface-enhanced Raman scattering (SERS) effects of Au NP clusters were examined by comparing the difference in Raman intensities obtained at 30 V mm-1 and in a frequency range of 0.1 kHz to 1 MHz. The application of a low-frequency field at 0.1 kHz caused a rapid aggregation of the Au NPs, resulting in low Raman intensities of the probe molecules. Conversely, high-frequency applications between 1 kHz and 1 MHz successfully enhanced the Raman intensities of the molecules in suspension. The strong correlation of the optical/sensing properties with the Au NP clustering states reveals that the application of an AC electric field is a powerful tool for control over the plasmonic properties.

Escaping the Ashby limit for mechanical damping/stiffness trade-off using a constrained high internal friction interfacial layer

The development of new materials with reduced noise and vibration levels is an active area of research due to concerns in various aspects of environmental noise pollution and its effects on health. Excessive vibrations also reduce the service live of the structures and limit the fields of their utilization. In oscillations, the viscoelastic moduli of a material are complex and it is their loss part - the product of the stiffness part and loss tangent - that is commonly viewed as a figure of merit in noise and vibration damping applications. The stiffness modulus and loss tangent are usually mutually exclusive properties so it is a technological challenge to develop materials that simultaneously combine high stiffness and high loss. Here we achieve this rare balance of properties by filling a solid polymer matrix with rigid inorganic spheres coated by a sub-micron layer of a viscoelastic material with a high level of internal friction. We demonstrate that this combination can be experimentally realised and that the analytically predicted behaviour is closely reproduced, thereby escaping the often termed 'Ashby' limit for mechanical stiffness/damping trade-off and offering a new route for manufacturing advanced composite structures with markedly reduced noise and vibration levels.

The Frictional Coefficient of the Temporomandibular Joint and Its Dependency on the Magnitude and Duration of Joint Loading

In synovial joints, friction between articular surfaces leads to shear stress within the cartilaginous tissue, which might result in tissue rupture and failure. Joint friction depends on synovial lubrication of the articular surfaces, which can be altered due to compressive loading. Therefore, we hypothesized that the frictional coefficient of the temporomandibular joint (TMJ) is affected by the magnitude and duration of loading. We tested this by measuring the frictional coefficient in 20 intact porcine TMJs using a pendulum-type friction tester. The mean frictional coefficient was 0.0145 (SD 0.0027) after a constant loading of 50 N during 5 sec. The frictional coefficient increased with the length of the preceding loading duration and exceeded 0.0220 (SD 0.0014) after 1 hr. Application of larger loading (80 N) resulted in significantly larger frictional coefficients. In conclusion, the frictional coefficient in the TMJ was proportional to the magnitude and duration of joint loading.

Dynamic Compressive Properties of the Mandibular Condylar Cartilage

The mandibular condylar cartilage plays an important role as a stress absorber during function. However, relatively little information is available on its dynamic properties under compression. We hypothesized that these properties are region-specific and depend on loading frequency. To characterize the viscoelastic properties of the condylar cartilage, we performed dynamic indentation tests over a wide range of loading frequencies. Ten porcine mandibular condyles were used; the articular surface was divided into 4 regions, anteromedial, anterolateral, posteromedial, and posterolateral. The dynamic complex, storage, and loss moduli increased with frequency, and these values were the highest in the anteromedial region. Loss tangent decreased with frequency from 0.68 to 0.17, but a regional difference was not found. The present results suggest that the dynamic compressive modulus is region-specific and is dependent on the loading frequency, which might have important implications for the transmission of load in the temporomandibular joint.

Shear Properties of the Temporomandibular Joint Disc in Relation to Compressive and Shear Strain

Shear stress can result in fatigue, damage, and irreversible deformation of the temporomandibular joint disc. Insight into the dynamic shear properties of the disc may give insight into the mechanism inducing tissue failure due to shear. We tested the hypothesis that the dynamic shear properties of the disc depend on the amount of shear and compressive strain. Twenty-four porcine discs were used for dynamic shear tests. The specimens were clamped between the plates of a loading apparatus under compressive strains of 5%, 10%, and 15%. Dynamic shear was applied to the specimen by a sinusoidal strain of, respectively, 0.5%, 1.0%, and 1.5%. Both the dynamic elasticity and viscosity were proportional to compressive strain and inversely proportional to shear strain. These shear characteristics suggest a significant role of compressive and shear strain on the internal friction of the disc.

Hyaluronan metabolism in overloaded temporomandibular joint

This study aimed to examine hyaluronan (HA) metabolism in relation to the onset and progression of temporomandibular joint osteoarthritis (TMJ-OA) induced by mechanical overloading. Two-month-old and 6-month-old C57BL/6N mice were divided into experimental and untreated control groups (n = 5/group). A sliding plate was attached to the maxillary incisors of the experimental mice for 10 days to overload the condylar cartilage in TMJ. In experimental group, profound cartilage degradation was detected in haematoxylin-eosin, Safranin-O-Fast Green-stained sections. It was also shown that the cartilage degradation was greater in older mice in both the control and the experimental groups. The number of HABP-positive cells was decreased by mechanical overloading and with age. The reduction of HA expression was correlated with the progression of cartilage degradation induced by mechanical overloading. The absolute quantification of the mRNA expression related to HA synthesis and HA degradation was also performed in each group. The mRNA expression levels of HA synthase (HAS) 2 and 3 were lower in the experimental group compared with the control group in the younger mice. In contrast, the mRNA expression levels of the HA degradation gene, HYAL2 and KIAA1199, were higher in the experimental group compared with the control group in the older mice. Thus, mechanical overload differently affected the balance of HA degradation and HA synthesis in the older and younger mice, respectively. In conclusion, mechanical overloading affects HA metabolism and it might initiate or amplify the condylar cartilage degradation.

Effects of HLA-DPB1 genotypes on chronic hepatitis B infection in Japanese individuals

Significant associations of HLA-DP alleles with chronic hepatitis B (CHB) infection are evident in Asian and Arabian populations, including Japanese, Han Chinese, Korean, and Saudi Arabian populations. Here, significant associations between CHB infection and five DPB1 alleles (two susceptibility alleles, DPB1(*) 05:01 and (*) 09:01, and three protective alleles, DPB1(*) 02:01, (*) 04:01, and (*) 04:02) were confirmed in a population comprising of 2582 Japanese individuals. Furthermore, odds ratios for CHB were higher for those with both DPB1 susceptibility alleles than for those with only one susceptibility allele; therefore, effects of susceptibility alleles were additive for risk of CHB infection. Similarly, protective alleles showed an additive effect on protection from CHB infection. Moreover, heterozygotes of any protective allele showed stronger association with CHB than did homozygotes, suggesting that heterozygotes may bind a greater variety of hepatitis B-derived peptides, and thus present these peptides more efficiently to T-cell receptors than homozygotes. Notably, compound heterozygote of the protective allele (any one of DPB1*02:01, *04:01, and *04:02) and the susceptible allele DPB1*05:01 was significantly associated with protection against CHB infection, which indicates that one protective HLA-DPB1 molecule can provide dominant protection. Identification of the HLA-DPB1 genotypes associated with susceptibility to and protection from CHB infection is essential for future analysis of the mechanisms responsible for immune recognition of hepatitis B virus antigens by HLA-DPB1 molecules.