Evaluation of an expectation and outcome measurement questionnaire in ankle fracture patients: The Trauma Expectation Factor Trauma Outcomes Measure (TEFTOM) Eurasia study

BACKGROUND

The Trauma Expectation Factor Trauma Outcomes Measure (TEFTOM) questionnaire is a self-administered, patient-rated outcome measurement questionnaire designed to measure both 'expectation' and 'outcome' in orthopaedic trauma patients using two subsets of 10 items. We aimed to validate this instrument in a culturally diverse cohort of patients recruited from Asian and European regions.

METHODS

A total of 193 adult patients with surgically treated AO Foundation/Orthopaedic Trauma Association types 43 and 44 ankle malleolar and distal tibia fractures were recruited with 158 followed up till 1 year. Expectations were assessed prior to surgery, at 2 weeks and after 6 months using the trauma expectation factor (TEF) score. Outcomes were evaluated at 2 weeks, 6 and 12 months using the trauma outcome measure (TOM), American Academy of Orthopaedic Surgeons (AAOS), foot and ankle outcome score (FAOS) and short form-36 (SF-36) questionnaires. Psychometric properties of TEFTOM were assessed.

RESULTS

TEF and TOM demonstrated good internal consistency (Cronbach's α > 0.87) and reliability at all time points (intra-class correlation coefficients > 0.90). TOM showed strong correlations (R² ≥ 0.60) with the AAOS foot and ankle score, all FAOS subscales, except 'symptoms' and SF-36 physical functioning, role physical, bodily pain, social functioning and the physical component summary at 6 and 12 months. Effect sizes for TOM were 2.30 and 0.74 from 2 weeks to 6 months and from 6 months to 12 months, respectively. The baseline patient TEF was predictive for the 1-year TOM score.

CONCLUSIONS

TEFTOM demonstrated good psychometric properties in this cohort of patients with ankle fractures. The TEF 'expectation' score was predictive of the TOM 'outcome' score. We recommend researchers and clinicians to utilize TEFTOM when patient expectation measurement is concerned for orthopaedic trauma patients.

Cementation: for better or worse? Interim results of a multi-centre cohort study using a fenestrated spiral blade cephalomedullary device for pertrochanteric fractures in the elderly

INTRODUCTION

Cephallomedullary nail fixation is currently the most popular treatment for pertrochanteric fractures. Despite continuous improvement in implant design, fixation failures still occur in a concerning number of cases. This study aims to evaluate the effect of cement augmentation of the new-generation Trochanteric Femoral Nail Advanced (TFNA) perforated spiral blade on complications including fixation failure in the elderly population.

MATERIALS AND METHODS

We retrospectively evaluated 107 patients aged 65 + treated for pertrochanteric fractures via TFNA between 2015 and 2019 based on whether cementation was used. Baseline demographics, fracture classifications, and reduction quality were compared. Patients with a follow-up of at least 6 months were analyzed for the primary outcome of fixation failure. All patients, regardless of loss to follow-up within 6 months, were analyzed for other complications including mortality.

RESULTS

Seventy-six patients (47 cemented, 29 non-cemented) had a minimum follow-up of 6 months (mean 13 months). There were no statistically significant differences between the two treatment groups in terms of patient demographics, ASA or AO/OTA fracture classification, reduction quality, or length of follow-up. There was a lower rate of fixation failure in the cement-augmented (CA) group versus the non-cement-augmented (NCA) group (2.1% vs 13.8%; p = 0.047). No cut-out or cut-through was observed in the CA group. Seven patients had adverse intraoperative events, with a significantly higher rate of fixation failure in these patients (40% vs 2.8%; p = 0.00). There were no statistically significant differences in 30-day mortality (6.3% CA vs 4.3% NCA; p = 0.632) or 3-month mortality (9.5% CA vs 12.8% NCA; p = 0.589).

CONCLUSIONS

Cementation of TFNA blades may decrease risk of fixation failure, however, the surgeon must be aware of potential complications such as cement leakage into the hip joint and be able to manage them as they arise.

Effect of the screw tightening sequence on the stress distribution of a dynamic compression plate: A pilot finite element study

OBJECTIVE

Although the optimal screw tightening sequence is a common question orthopaedists encounter during fractures fixation with a dynamic compression plate (DCP), the effect of the screw tightening sequence on the stability of the plate has never been explored. This study explores the effect of the screw tightening sequence on the stress distribution of a DCP using a finite element method.

METHODS

Idealized finite element analysis models of the femoral diaphysis with six-hole or eight-hole DCPs were constructed. The screw tightening preload was simulated using 'bolt load' in ABAQUS. Two screw tightening sequences were studied for the six-hole plate and six sequences were studied for the eight-hole plate. U magnitude and Von Mises stress were used to evaluate the deformation and stress distribution of the plate, respectively. Deformation and stress distribution plots from different sequences were compared.

RESULTS

The different screw tightening sequences showed different deformation processes, while all had the same final deformation after all the screws were tightened. Each screw tightening step of different tightening sequences showed different stress distributions in the plate, while all had the same stress distribution after all the screws were tightened.

CONCLUSION

Using different screw tightening sequences to fix the same DCP can produce the same stability, which means in terms of fixation stability, after the two screws nearest to the fracture line are tightened, surgeons do not need to hesitate about the order in which the rest screws should be inserted during the surgery.

Comparison of radiological and clinical outcomes, complications, and implant removals in anatomically pre-contoured clavicle plates versus reconstruction plates - a propensity score matched retrospective cohort study of 106 patients

Background

Plate fixation is frequently used to treat displaced midshaft clavicular fractures, however the ideal plate choice remains subject to discussion; reconstruction locking compression plates (RLCPs) are cheaper and can be easily contoured, whereas anatomically pre-contoured locking compression plates (ALCPs) are thought to provide better stability and therefore lower rates of mechanical failure.

To compare the incidence of mechanical failures, functional and radiological outcomes in patients with midshaft clavicular fractures treated with ALCPs versus RLCPs.

Methods

A propensity score matched retrospective cohort study was conducted across two centers. One hundred and six consecutively recruited patients with displaced midshaft clavicular fractures, who were treated with plate fixation and had a minimum follow-up of 6 months, were matched on gender, age, fracture grading, energy of injury, and fracture location. The resulting groups included 53 ALCP-treated fractures and 53 matched controls treated with RLCPs.

Results

During a mean follow-up of 20.5 months, there were no implant deformities in the ALCP group whereas the RLCP group had 6 patients (11.3%, p = 0.012) with implant deformities (5 occurrences of plate bending with fracture union, and 1 plate breakage with nonunion). Despite the higher rate of plate deformities in the RLCP group, there were no statistically significant differences in number of patients recovering full shoulder range of motion (ALCP 90.6%, RLCP 88.7%, p = 0.751), incidence of rest pain (ALCP 13.2%, RLCP 9.4%, p = 0.542), or implant removals (ALCP 49.1%, RLCP 56.6%, p = 0.439).

Conclusion

ALCPs may be superior to RLCPs in terms of implant stability but appear to produce similar clinical results.

Infraclavicular nerve block reduces postoperative pain after distal radial fracture fixation: a randomized controlled trial

Background

It is unclear whether regional anesthesia with infraclavicular nerve block or general anesthesia provides better postoperative analgesia after distal radial fracture fixation, especially when combined with regular postoperative analgesic medications. The aim of this study was to compare the postoperative analgesic effects of regional versus general anesthesia.

Methods

In this prospective, observer blinded, randomized controlled trial, 52 patients undergoing distal radial fracture fixation received either general anesthesia (n = 26) or regional anesthesia (infraclavicular nerve block, n = 26). Numerical rating scale pain scores, analgesic consumption, patient satisfaction, adverse effects, upper limb functional scores (Patient-Rated Wrist Evaluation, QuickDASH), health related quality of life (SF12v2), and psychological status were evaluated after surgery.

Result

Regional anesthesia was associated with significantly lower pain scores both at rest and with movement on arrival to the post-anesthetic care unit; and at 1, 2, 24 and 48 h after surgery (p ≤ 0.001 at rest and with movement). Morphine consumption in the post-anesthetic care unit was significantly lower in the regional anesthesia group (p<0.001). There were no differences in oral analgesic consumption. Regional anesthesia was associated with lower incidences of nausea (p = 0.004), and vomiting (p = 0.050). Patient satisfaction was higher in the regional anesthesia group (p = 0.003). There were no long-term differences in pain scores and other patient outcomes.

Conclusion

Regional anesthesia with ultrasound guided infraclavicular nerve block was associated with better acute pain relief after distal radial fracture fixation, and may be preferred over general anesthesia.

Trial registration

Before subject enrollment, the study was registered at ClinicalTrials.gov (NCT03048214) on 9th February 2017.

A Retrospective Review on Atypical Femoral Fracture: Operative Outcomes and the Risk Factors for Failure

Background

Atypical femoral fractures have been demonstrated to have high risks of reoperation and nonunion. The aim of this study is to evaluate whether the quality of reduction following operative fixation of atypical femoral fracture predicts failure.

Methods

This is a 6.5-year retrospective review of atypical femoral fractures from 2 centers in a high-income region. A total of 56 patients with 66 fractures met our inclusion criteria. The quality of reduction was evaluated from postoperative films according to Hoskins' modification of Baumgartner criteria for subtrochanteric fractures. Our primary outcome measure was failure of treatment, defined as either reoperation or nonunion at 12 months.

Results

There were a total of 8 reoperations (12% of all fractures) and 8 nonunion (12% of all fractures), affecting a total of 12 fractures (18%) in 12 patients (21%). Closed reduction (P = .04) and poor quality of reduction (P = .0227 Fisher exact test) are statistically significant risk factors for failure.

Conclusions

An aim for anatomical reduction with both <4 mm maximal cortical displacement and <10° angulation can improve the operative outcome of atypical femoral fractures. The addition of open reduction may be beneficial.

Anoikis resistant mediated by FASN promoted growth and metastasis of osteosarcoma

The pulmonary metastasis of osteosarcoma (OS) occurs commonly, which resulted from anoikis resistant (AR) of tumor cells as reported by previous studies, but the exact roles of AR in osteosarcoma were not fully studied. Our previous investigations showed fatty acid synthase (FASN) was relating to clinical features of patients with OS. In this study, we aim to explore the functions of FASN in the AR OS cells in vitro and in vivo and study the downstream effectors of FASN. In the present study, we used our established cell model to study the AR. We revealed that AR promoted cell proliferation and migration as determined by colony formation assay and transwell assay. In addition, AR assisted tumor growth in vivo. In the AR cells, the expression of FASN was higher. Thus, we constructed lentiviruses to silence or overexpress FASN in four cell lines to study functions of FASN. Silence of FASN reduced cell colonies and migration while overexpression of FASN increased colonies and migration in suspended cells. Loss of functions of FASN induced cell apoptosis in suspended OS cells while gain of function of FASN suppressed apoptosis as determined by flow cytometry. We found the levels of p-ERK1/2 and Bcl-xL declined when FASN was silenced while they increased when FASN was overexpressed. In addition, results showed that the levels of FASN and its potential related molecules (p-ERK1/2 and Bcl-xL) increased in 143B-AR and MG-63-AR cells. In vivo study showed that inhibition of FASN decreased pulmonary metastasis of OS. In conclusion, we showed that anoikis resistant and FASN as two interactional factors facilitated the progress of osteosarcoma.

Comparing 3 Different Techniques of Patella Fracture Fixation and Their Complications

Introduction:

Patella fractures managed by fixation with metal implants often cause local soft tissue irritation and necessitate implant removal. An alternative is to utilize suture-based fixation methods. We have adopted suture and hybrid fixation in the routine management of patella fractures. Here, we compare the results of 3 fixation techniques.

Materials and Methods:

Eighty-seven eligible patients underwent patella fracture fixation over a 3-year period. As determined by fracture configuration, patients received (1) suture fixation (transosseous sutures and figure-of-eight tension banding with FiberWire), (2) hybrid fixation (transosseous FiberWire sutures and metal tension banding), or (3) metal fixation. Primary outcome measures included reoperation rate and soft tissue irritation. Secondary outcomes included surgical complications, radiological, and functional parameters.

Results:

Reoperation rate was highest for metal fixation (25/57, 43.9%) and lowest for suture fixation (2/13, 15.4%). Soft tissue irritation necessitating implant removal was the predominant reason for reoperation and was significantly less prevalent following suture fixation (1/13, 7.7%, P < .01). Hybrid fixation resulted in similar rates of soft tissue irritation (6/17, 35.3%) and implant removal (7/17, 41.2%) as compared to metal fixation. There was a significant increase in patella baja (13/17, 76.5%) and reduction in Insall-Salvati ratio (0.742; 95% confidence interval: 0.682-0.802) following hybrid fixation as compared to the other 2 fixation methods (P < .05).

Discussion:

Suture fixation results in the least amount of soft tissue irritation and lowest reoperation rate, but these advantages are negated with the addition of a metal tension band wire. Hybrid fixation also unbalances the extensor mechanism.

Conclusion:

Patients should be counseled as to the expected sequelae of their fixation method. Suture fixation is the favored means to fix distal pole fractures of the patella. An additional metal tension band loop may confer additional stability but should be applied with caution.

A novel fracture mechanics model explaining the axial penetration of bone-like porous, compressible solids by various orthopaedic implant tips

Many features of orthopaedic implants have been previously examined regarding their influence on migration in trabecular bone under axial loading, with screw thread design being one of the most prominent examples. There has been comparatively little investigation, however, of the influence that implant tip design has on migration under axial loads. We present a novel fracture mechanics model that explains how differences in tip design affect the force required for axial penetration of porous, compressible solids similar to trabecular bone. Three tip designs were considered based on typical 5 mm diameter orthopaedic locking screws: flat and conical tip designs, as well as a novel elastomeric tip. Ten axial penetration trials were conducted for each tip design. In order to isolate the effect of tip design on axial migration from that of the threads, smooth steel rods were used. Tip designs were inserted into polyurethane foam commonly used to represent osteoporotic trabecular bone tissue (ASTM Type 10, 0.16 g/cc) to a depth of 10 mm at a rate of 2 mm/min, while force and position were recorded. At maximum depth, elastomeric tips were found to require the greatest force for axial migration (mean of 248.24 N, 95% Confidence Interval [CI]: 238.1-258.4 N), followed by conical tips (mean of 143.46 N, 95% CI: 142.1-144.9 N), and flat tips (mean of 113.88 N, 95% CI: 112.2-115.5 N). This experiment was repeated in cross-section while recording video of material compaction through a transparent window. Strain fields for each tip design were then generated from these videos using digital image correlation (DIC) software. A novel fracture mechanics model, combining the Griffith with porous material compaction, was developed to explain the performance differences observed between the three tip designs. This model predicted that steady-state stress would be roughly the same (~ 4 MPa) across all designs, a finding consistent with the experimental results. The model also suggested that crack formation and friction are negligible mechanisms of energy absorption during axial penetration of porous compressible solids similar to trabecular bone. Material compaction appears to be the dominant mechanism of energy absorption, regardless of tip design. The cross-sectional area of the compacted material formed during migration of the implant tip during axial penetration was shown to be a strong determinant of the force required for migration to occur (Pearson Coefficient = 0.902, p < .001). As such, implant tips designed to maximize the cross-sectional area of compacted material - such as the elastomeric and conical tips in the present study - may be useful in reducing excessive implant migration under axial loads in trabecular bone.

Restoration of Humeral Bone Stock Two Years After Internal Fixation of a Periprosthetic Fracture with a Loose Stem: A Report of Two Cases

CASE

We describe 2 patients who sustained a periprosthetic humeral fracture with a loosened long-stemmed Coonrad-Morrey total elbow prosthesis. As noted in the literature, the success rate for a major revision with use of strut grafts is around 70%; therefore, both cases were managed without revision of the prosthesis. A submuscular locking plate was placed following typical fracture fixation principles. Screws that interfered with the humeral stem and the distal flange stabilized both the distal fragment and the humeral stem.

CONCLUSION

At 2 years postoperatively, both fractures had healed, with increased endosteal bone stock. In each case, the prosthesis was successfully salvaged, and radiographic reconstitution of the implant-bone interface was noted after 2 years.

Abnormal subchondral bone remodeling and its association with articular cartilage degradation in knees of type 2 diabetes patients

Type 2 diabetes (T2D) is associated with systemic abnormal bone remodeling and bone loss. Meanwhile, abnormal subchondral bone remodeling induces cartilage degradation, resulting in osteoarthritis (OA). Accordingly, we investigated alterations in subchondral bone remodeling, microstructure and strength in knees from T2D patients and their association with cartilage degradation. Tibial plateaus were collected from knee OA patients undergoing total knee arthroplasty and divided into non-diabetic (n=70) and diabetes (n=51) groups. Tibial plateaus were also collected from cadaver donors (n=20) and used as controls. Subchondral bone microstructure was assessed using micro-computed tomography. Bone strength was evaluated by micro-finite-element analysis. Cartilage degradation was estimated using histology. The expression of tartrate-resistant acidic phosphatase (TRAP), osterix, and osteocalcin were calculated using immunohistochemistry. Osteoarthritis Research Society International (OARSI) scores of lateral tibial plateau did not differ between non-diabetic and diabetes groups, while higher OARSI scores on medial side were detected in diabetes group. Lower bone volume fraction and trabecular number and higher structure model index were found on both sides in diabetes group. These microstructural alterations translated into lower elastic modulus in diabetes group. Moreover, diabetes group had a larger number of TRAP⁺ osteoclasts and lower number of Osterix⁺ osteoprogenitors and Osteocalcin⁺ osteoblasts. T2D knees are characterized by abnormal subchondral bone remodeling and microstructural and mechanical impairments, which were associated with exacerbated cartilage degradation. In regions with intact cartilage the underlying bone still had abnormal remodeling in diabetes group, suggesting that abnormal bone remodeling may contribute to the early pathogenesis of T2D-associated knee OA.

Arthroscopic Removal of Suprapatellar Fibroma of Tendon Sheath

Intra-articular fibroma of tendon sheath is a rare disease. To our knowledge, less than 20 cases have been reported in the literature, and none of them was a Chinese patient. In this case report, we present a Chinese patient with intra-articular fibroma of tendon sheath of the knee joint which was excised arthroscopically. We also summarized the clinical presentation, diagnosis, and subsequent management of intra-articular fibroma of tendon sheath.

The effectiveness of a multidisciplinary hip fracture care model in improving the clinical outcome and the average cost of manpower

After the implementation of the multidisciplinary geriatric hip fracture clinical pathway in 2007, the hospital length of stay and the clinical outcomes improves. Moreover, the cost of manpower for each hip fracture decreases. It proves that this care model is cost-effective.

INTRODUCTION

The objective of this study is to compare the clinical outcomes and the cost of manpower before and after the implementation of the multidisciplinary geriatric hip fracture clinical pathway (GHFCP).

METHODS

The hip fracture data from 2006 was compared with the data of four consecutive years since 2008. The efficiency of the program is assessed using the hospital length of stay. The clinical outcomes include mortality rates and complication rates are compared. Cost of manpower was also analysed.

RESULTS

After the implementation of the GHFCP, the preoperative length of stay shortened significantly from 5.8 days in 2006 to 1.3 days in 2011. The total length of stay in both acute and rehabilitation hospitals were also shortened by 6.1 days and 14.2 days, respectively. The postoperative pneumonia rate also decreased from 1.25 to 0.25%. The short- and long-term mortalities also showed a general improvement. Despite allied health manpower was increased to meet the increased workload, the shortened length of stay accounted for a mark decrease in cost of manpower per hip fracture case.

CONCLUSION

This study proves that the GHFCP shortened the geriatric hip fracture patients' length of stay and improves the clinical outcomes. It is also cost-effective which proves better care is less costly.

Seasonal Variation in Hip Fracture Mortality

Objectives:

This study aims to identify if wintertime surgery increases the mortality of the patients after hip fracture operations.

Design:

Retrospective observational cohort study.

Setting:

The data for this citywide retrospective observational cohort study came from Clinical Data Analysis Reporting System.

Patient:

This study included 35 409 patients with hip fracture operations from July 2005 to December 2013.

Main Outcome Measures:

Cox regression hazard model was used to estimate the independent effect of operation being performed in winter on the hazard of mortality. The hazard model included covariates found to be independent predictors of mortality: age, sex, surgical delay, and Charlson Comorbidity Index (CCI).

Results:

There was a seasonal variation with more hip fracture operations happening in the winter months. The 1-month, 6-month, 1-year, and 5-year mortality were 3%, 11%, 17%, and 47%, respectively. Operation performed in winter was associated with a higher hazard of mortality (hazard ratio [HR] 1.040; 95% confidence interval: 1.010-1.072; P = .009). The HR was greater with male sex (HR 1.786; P = .000), advanced age (≥85 years old: HR 2.819; P = .000), the longer surgical delay (HR 1.018; P = .000), and higher CCI (severe CCI group: HR 2.963; P = .000).

Conclusion:

Wintertime hip fracture surgery was associated with an increased hazard of mortality after adjusting for other known risk factors affecting mortality post hip fracture operations.

Androgen deprivation therapy and fracture risk in Chinese patients with prostate carcinoma

OBJECTIVE

Androgen deprivation therapy (ADT) increases fracture risk in men with carcinoma of the prostate, but little is known about the fracture risk for different types of ADT. We studied the fracture risk amongst Chinese patients with carcinoma of the prostate prescribed different ADT regimens.

SUBJECTS AND METHODS

This was a single-centered observational study that involved 741 patients with carcinoma of the prostate from January 2001 to December 2011.

RESULTS

After a median follow-up of 5 years, 71.7% of the study cohort received ADT and the incidence rate of fracture was 8.1%. Multivariable Cox regression analysis revealed that use of ADT was significantly associated with risk of incident fracture (Hazard Ratio [HR] 3.60; 95% Confidence Interval [95% CI] 1.41-9.23; p = 0.008), together with aged >75 years and type 2 diabetes. Compared with no ADT, all three types of ADT were independently associated with the risk of incident fracture: anti-androgen monotherapy (HR 4.47; 95% CI 1.47-13.7; p = 0.009), bilateral orchiectomy ± anti-androgens (HR 4.01; 95% CI 1.46-11.1; p = 0.007) and luteinizing hormone-releasing hormone agonists ± anti-androgens (HR 3.16; 95% CI 1.18-8.43; p = 0.022). However, there was no significant difference in the relative risks among the three types of ADT.

CONCLUSIONS

Fracture risk increases among all types of ADT. Clinicians should take into account the risk-benefit ratio when prescribing ADT, especially in elderly patients with type 2 diabetes.

miR-375-3p negatively regulates osteogenesis by targeting and decreasing the expression levels of LRP5 and β-catenin

Wnt signaling pathways are essential for bone formation. Previous studies showed that Wnt signaling pathways were regulated by miR-375. Thus, we aim to explore whether miR-375 could affect osteogenesis. In the present study, we investigated the roles of miR-375 and its downstream targets. Firstly, we revealed that miR-375-3p negatively modulated osteogenesis by suppressing positive regulators of osteogenesis and promoting negative regulators of osteogenesis. In addition, the results of TUNEL cell apoptosis assay showed that miR-375-3p induced MC3T3-E1 cell apoptosis. Secondly, miR-375-3p targeted low-density lipoprotein receptor-related protein 5 (LRP5), a co-receptor of the Wnt signaling pathways, and β-catenin as determined by luciferase activity assay, and it decreased the expression levels of LRP5 and β-catenin. Thirdly, the decline of protein levels of β-catenin was determined by immunocytochemistry and immunofluorescence. Finally, silence of LRP5 in osteoblast precursor cells resulted in diminished cell viability and cell proliferation as detected by WST-1-based colorimetric assay. Additionally, all the parameters including the relative bone volume from μCT measurement suggested that LRP5 knockout in mice resulted in a looser and worse-connected trabeculae. The mRNA levels of important negative modulators relating to osteogenesis increased after the functions of LRP5 were blocked in mice. Last but not least, the expression levels of LRP5 increased during the osteogenesis of MC3T3-E1, while the levels of β-catenin decreased in bone tissues from osteoporotic patients with vertebral compression fractures. In conclusion, we revealed miR-375-3p negatively regulated osteogenesis by targeting LRP5 and β-catenin. In addition, loss of functions of LRP5 damaged bone formation in vivo. Clinically, miR-375-3p and its targets might be used as diagnostic biomarkers for osteoporosis and might be also as novel therapeutic agents in osteoporosis treatment. The relevant products of miR-375-3p might be developed into molecular drugs in the future. These molecules could be used in translational medicine.

How to obtain and identify the acetabular anterior column axial view projection in patients?

PURPOSE

This study aims at sharing our experience as how to obtain and identify axial view image of the acetabular anterior column in patients.

METHODS

Pelvic computed tomography data of six normal adults were used to reconstruct three-dimensional (3D) models. The transparency of each 3D model was downgraded at the view perpendicular to the cross section of the anterior column axis to simulate the anterior column axial view image. Fluoroscopy was performed in all patients to obtain the anterior column axial view image in the operating room. Each fluoroscopic image was compared with the corresponding simulation image to analyze potential anatomic landmarks that were helpful to identify the translucent area (projection of the screw path) in the patients.

RESULTS AND CONCLUSIONS

To obtain ideal anterior column axial fluoroscopic image, the patient should be positioned supine with the leg of "abnormal side" straight and contralateral side flexion, abduction, and external rotation; the C-arm machine should be placed at the caudal end of the operation table with the C-arm fluoroscopic intensifier first positioned at the pelvic lateral view and then tilted approximately 30° toward the "abnormal side" and rotated approximately 45° toward the caudal end of the operation table. To identify the translucent area on the anterior column axial view fluoroscopic image obtained from the patient, the greater sciatic notch, the true pelvis edge, and the acetabulum should be identified first and the translucent area is located in the area surrounded by these three anatomic landmarks.

Infection after fracture osteosynthesis - Part II

In the first part of this article, we have discussed the pathogenesis, clinical presentation, diagnosis and classification of infection after fracture osteosynthesis with implants, termed here as osteosynthesis-associated infection (OAI). Prolonged antibiotic treatment is usually necessary. Implant retention and maintenance of fracture stability to allow for fracture healing in spite of infection are allowed for OAI. Depending on the severity of infection, status of fracture healing and host status, the treatment follows five common pathways. These are non-operative treatment, debridement with implant retention, conversion of fixation, implant removal and suppression therapy. The decision-making process leading to each treatment pathway and challenging scenarios is discussed in detail.

Infection after fracture osteosynthesis - Part I

Bone and surgical site infections after osteosynthesis are notoriously difficult to manage and pose a tremendous burden in fracture management. In this article, we use the term osteosynthesis-associated infection (OAI) to refer to this clinical entity. While relatively few surgically treated fractures become infected, it is challenging to perform a rapid diagnosis. Optimal management strategies are complex and highly customized to each scenario and take into consideration the status of fracture union, the presence of hardware and the degree of mechanical stability. At present, a high level of relevant evidence is unavailable; most findings presented in the literature are based on laboratory work and non-randomized clinical studies. We present this overview of OAI in two parts: an examination of recent literature concerning OAI pathogenesis, diagnosis and classification and a review of treatment options.

The use of three-dimensional printing technology in orthopaedic surgery

Three-dimensional (3-D) printing or additive manufacturing, an advanced technology that 3-D physical models are created, has been wildly applied in medical industries, including cardiothoracic surgery, cranio-maxillo-facial surgery and orthopaedic surgery. The physical models made by 3-D printing technology give surgeons a realistic impression of complex structures, allowing surgical planning and simulation before operations. In orthopaedic surgery, this technique is mainly applied in surgical planning especially revision and reconstructive surgeries, making patient-specific instruments or implants, and bone tissue engineering. This article reviews this technology and its application in orthopaedic surgery.