26
|
|
27
|
Mishra K, Narayanan A, Mugele F. Design and wavefront characterization of an electrically tunable aspherical optofluidic lens. OPTICS EXPRESS 2019; 27:17601-17609. [PMID: 31252717 DOI: 10.1364/oe.27.017601] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/20/2019] [Accepted: 04/06/2019] [Indexed: 06/09/2023]
Abstract
We present a novel design of an exclusively electrically controlled adaptive optofluidic lens that allows for manipulating both focal length and asphericity. The device is totally encapsulated and contains an aqueous lens with a clear aperture of 2mm immersed in ambient oil. The design is based on the combination of an electrowetting-driven pressure regulation to control the average curvature of the lens and a Maxwell stress-based correction of the local curvature to control spherical aberration. The performance of the lens is evaluated by a dedicated setup for the characterization of optical wavefronts using a Shack Hartmann Wavefront Sensor. The focal length of the device can be varied between 10 and 27mm. At the same time, the Zernike coefficient Z40, characterising spherical aberration, can be tuned reversibly between 0.059waves and 0.003waves at a wavelength of λ=532nm. Several possible extensions and applications of the device are discussed.
Collapse
|
28
|
van Lin S, Grotz KK, Siretanu I, Schwierz N, Mugele F. Ion-Specific and pH-Dependent Hydration of Mica-Electrolyte Interfaces. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2019; 35:5737-5745. [PMID: 30974056 PMCID: PMC6495383 DOI: 10.1021/acs.langmuir.9b00520] [Citation(s) in RCA: 29] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/05/2023]
Abstract
Hydration forces play a crucial role in a wide range of phenomena in physics, chemistry, and biology. Here, we study the hydration of mica surfaces in contact with various alkali chloride solutions over a wide range of concentrations and pH values. Using atomic force microscopy and molecular dynamics simulations, we demonstrate that hydration forces consist of a superposition of a monotonically decaying and an oscillatory part, each with a unique dependence on the specific type of cation. The monotonic hydration force gradually decreases in strength with decreasing bulk hydration energy, leading to a transition from an overall repulsive (Li+, Na+) to an attractive (Rb+, Cs+) force. The oscillatory part, in contrast, displays a binary character, being hardly affected by the presence of strongly hydrated cations (Li+, Na+), but it becomes completely suppressed in the presence of weakly hydrated cations (Rb+, Cs+), in agreement with a less pronounced water structure in simulations. For both aspects, K+ plays an intermediate role, and decreasing pH follows the trend of increasing Rb+ and Cs+ concentrations.
Collapse
|
29
|
Narayanan A, Mugele F, Duits MHG. Device for rheometry, impedance spectroscopy, and electrochemistry on fluid electrodes. THE REVIEW OF SCIENTIFIC INSTRUMENTS 2019; 90:025112. [PMID: 30831771 DOI: 10.1063/1.5031126] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/28/2018] [Accepted: 12/02/2018] [Indexed: 06/09/2023]
Abstract
We describe the extension of a rheometer to enable in situ impedance spectroscopy and electrochemical cycling. Key advantages of this instrument over traditional flow-channel based methods for studying fluid electrodes are the possibilities to monitor the rheological properties during cycling as well as to control the mechanical history of the sample. We describe two electrochemical configurations of the instrument, allowing fluid electrodes to be studied as full and half-cells. To demonstrate the systems' capabilities, we present characterizations of 4 different fluid electrode systems.
Collapse
|
30
|
Bera B, Kumar N, Duits MHG, Cohen Stuart MA, Mugele F. Cationic Hofmeister Series of Wettability Alteration in Mica-Water-Alkane Systems. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2018; 34:13574-13583. [PMID: 30354154 PMCID: PMC6328296 DOI: 10.1021/acs.langmuir.8b03297] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 09/28/2018] [Revised: 10/24/2018] [Indexed: 06/08/2023]
Abstract
The specific interaction of ions with macromolecules and solid-liquid interfaces is of crucial importance to many processes in biochemistry, colloid science, and engineering, as first pointed out by Hofmeister in the context of (de)stabilization of protein solutions. Here, we use contact angle goniometry to demonstrate that the macroscopic contact angle of aqueous chloride salt solutions on mica immersed in ambient alkane increases from near-zero to values exceeding 10°, depending on the type and concentration of cations and pH. Our observations result in a series of increasing ability of cations to induce partial wetting in the order Na+, K+ < Li+ < Rb+ < Cs+ < Ca2+ < Mg2+ < Ba2+. Complementary atomic force microscopy measurements show that the transition to partial wetting is accompanied by cation adsorption to the mica-electrolyte interface, which leads to charge reversal in the case of divalent cations. In addition to electrostatics, hydration forces seem to play an important role, in particular for the monovalent cations.
Collapse
|
31
|
Baratian D, Dey R, Hoek H, van den Ende D, Mugele F. Breath Figures under Electrowetting: Electrically Controlled Evolution of Drop Condensation Patterns. PHYSICAL REVIEW LETTERS 2018; 120:214502. [PMID: 29883164 DOI: 10.1103/physrevlett.120.214502] [Citation(s) in RCA: 18] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/17/2018] [Indexed: 05/25/2023]
Abstract
We show that electrowetting (EW) with structured electrodes significantly modifies the distribution of drops condensing onto flat hydrophobic surfaces by aligning the drops and by enhancing coalescence. Numerical calculations demonstrate that drop alignment and coalescence are governed by the drop-size-dependent electrostatic energy landscape that is imposed by the electrode pattern and the applied voltage. Such EW-controlled migration and coalescence of condensate drops significantly alter the statistical characteristics of the ensemble of droplets. The evolution of the drop size distribution displays self-similar characteristics that significantly deviate from classical breath figures on homogeneous surfaces once the electrically induced coalescence cascades set in beyond a certain critical drop size. The resulting reduced surface coverage, coupled with earlier drop shedding under EW, enhances the net heat transfer.
Collapse
|
32
|
Liu F, Klaassen A, Zhao C, Mugele F, van den Ende D. Electroviscous Dissipation in Aqueous Electrolyte Films with Overlapping Electric Double Layers. J Phys Chem B 2018; 122:933-946. [PMID: 28976197 PMCID: PMC5776519 DOI: 10.1021/acs.jpcb.7b07019] [Citation(s) in RCA: 12] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/17/2017] [Revised: 09/19/2017] [Indexed: 01/16/2023]
Abstract
We use dynamic atomic force microscopy (AFM) to investigate the forces involved in squeezing out thin films of aqueous electrolyte between an AFM tip and silica substrates at variable pH and salt concentration. From amplitude and phase of the AFM signal we determine both conservative and dissipative components of the tip sample interaction forces. The measured dissipation is enhanced by up to a factor of 5 at tip-sample separations of ≈ one Debye length compared to the expectations based on classical hydrodynamic Reynolds damping with bulk viscosity. Calculating the surface charge density from the conservative forces using Derjaguin-Landau-Verwey-Overbeek (DLVO) theory in combination with a charge regulation boundary condition we find that the viscosity enhancement correlates with increasing surface charge density. We compare the observed viscosity enhancement with two competing continuum theory models: (i) electroviscous dissipation due to the electrophoretic flow driven by the streaming current that is generated upon squeezing out the counterions in the diffuse part of the electric double layer, and (ii) visco-electric enhancement of the local water viscosity caused by the strong electric fields within the electric double layer. While the visco-electric model correctly captures the qualitative trends observed in the experiments, a quantitative description of the data presumably requires more sophisticated simulations that include microscopic aspects of the distribution and mobility of ions in the Stern layer.
Collapse
|
33
|
Brunet Espinosa R, Duits MHG, Wijnperlé D, Mugele F, Lefferts L. Bubble formation in catalyst pores; curse or blessing? REACT CHEM ENG 2018. [DOI: 10.1039/c8re00110c] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
H2O2 decomposition experiments on Pt were performed in a glass microreactor, simulating arrays of catalyst pores. Both suppression as well as enhancement of the catalytic reaction is observed.
Collapse
|
34
|
Kumar N, Andersson MP, van den Ende D, Mugele F, Siretanu I. Probing the Surface Charge on the Basal Planes of Kaolinite Particles with High-Resolution Atomic Force Microscopy. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2017; 33:14226-14237. [PMID: 29140711 PMCID: PMC5738629 DOI: 10.1021/acs.langmuir.7b03153] [Citation(s) in RCA: 31] [Impact Index Per Article: 4.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/05/2023]
Abstract
High-resolution atomic force microscopy is used to map the surface charge on the basal planes of kaolinite nanoparticles in an ambient solution of variable pH and NaCl or CaCl2 concentration. Using DLVO theory with charge regulation, we determine from the measured force-distance curves the surface charge distribution on both the silica-like and the gibbsite-like basal plane of the kaolinite particles. We observe that both basal planes do carry charge that varies with pH and salt concentration. The silica facet was found to be negatively charged at pH 4 and above, whereas the gibbsite facet is positively charged at pH below 7 and negatively charged at pH above 7. Investigations in CaCl2 at pH 6 show that the surface charge on the gibbsite facet increases for concentration up to 10 mM CaCl2 and starts to decrease upon further increasing the salt concentration to 50 mM. The increase of surface charge at low concentration is explained by Ca2+ ion adsorption, while Cl- adsorption at higher CaCl2 concentrations partially neutralizes the surface charge. Atomic resolution imaging and density functional theory calculations corroborate these observations. They show that hydrated Ca2+ ions can spontaneously adsorb on the gibbsite facet of the kaolinite particle and form ordered surface structures, while at higher concentrations Cl- ions will co-adsorb, thereby changing the observed ordered surface structure.
Collapse
|
35
|
Narayanan A, Wijnperlé D, Mugele F, Buchholz D, Vaalma C, Dou X, Passerini S, Duits M. Influence of electrochemical cycling on the rheo-impedance of anolytes for Li-based Semi Solid Flow Batteries. Electrochim Acta 2017. [DOI: 10.1016/j.electacta.2017.08.022] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/19/2022]
|
36
|
Balabajew M, Balke N, Bazant M, Bennewitz R, Brilliantov N, de Wijn AS, Dey R, Drummond C, Dryfe R, Girault H, Hatzell K, Hillman R, Kornev K, Kornyshev AA, Kratochvilova I, Krupenkin T, Lee A, Mount A, Mugele F, Randriamahazaka H, Robotham O, Schatz G, Schiffrin D, Smela E, Yaroshchuk A. Electroactuators: from understanding to micro-robotics and energy conversion: general discussion. Faraday Discuss 2017; 199:525-545. [PMID: 28675404 DOI: 10.1039/c7fd90031g] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
|
37
|
Bazant M, Bennewitz R, Bocquet L, Brilliantov N, Dey R, Drummond C, Dryfe R, Girault H, Hatzell K, Kornev K, Kornyshev AA, Kratochvilova I, Kucernak A, Kulkarni M, Kumar S, Lee A, Lemay S, Medhi H, Mount A, Mugele F, Perkin S, Rutland M, Schatz G, Schiffrin D, Smela E, Smirnov E, Urbakh M, Yaroshchuk A. Electrotunable wetting, and micro- and nanofluidics: general discussion. Faraday Discuss 2017; 199:195-237. [PMID: 28675401 DOI: 10.1039/c7fd90028g] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
|
38
|
Kudina O, Eral HB, Mugele F. E-MALDI: optimized conditions during electrowetting-enhanced drop drying for MALDI-MS. JOURNAL OF MASS SPECTROMETRY : JMS 2017; 52:405-410. [PMID: 28422343 DOI: 10.1002/jms.3934] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/23/2016] [Revised: 04/03/2017] [Accepted: 04/04/2017] [Indexed: 06/07/2023]
Abstract
We recently showed that electrowetting-enhanced sample preparation for MALDI-MS (eMALDI) can increase the intensity of the MALDI signal by 2-25 times compared with conventional drop drying by concentrating all the dried sample in a single spot rather than leaving behind a heterogeneous coffee-stain pattern. Here, we demonstrate that the eMALDI signal enhancement can be further increased to more than 100 times by systematically optimizing the electrowetting actuation frequency and amplitude. This enables 30 times signal increase for a peptide standard. Simultaneously, drop drying times can be reduced approximately five times by increasing the actuation voltage and/or decreasing the initial drop volume. Copyright © 2017 John Wiley & Sons, Ltd.
Collapse
|
39
|
Haagh MEJ, Siretanu I, Duits MHG, Mugele F. Salinity-Dependent Contact Angle Alteration in Oil/Brine/Silicate Systems: the Critical Role of Divalent Cations. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2017; 33:3349-3357. [PMID: 28332396 PMCID: PMC5390307 DOI: 10.1021/acs.langmuir.6b04470] [Citation(s) in RCA: 39] [Impact Index Per Article: 5.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/13/2016] [Revised: 03/21/2017] [Indexed: 06/06/2023]
Abstract
The effectiveness of water flooding oil recovery depends to an important extent on the competitive wetting of oil and water on the solid rock matrix. Here, we use macroscopic contact angle goniometry in highly idealized model systems to evaluate how brine salinity affects the balance of wetting forces and to infer the microscopic origin of the resultant contact angle alteration. We focus, in particular, on two competing mechanisms debated in the literature, namely, double-layer expansion and divalent cation bridging. Our experiments involve aqueous droplets with a variable content of chloride salts of Na+, K+, Ca2+, and Mg2+, wetting surfaces of muscovite and amorphous silica, and an environment of ambient decane containing small amounts of fatty acids to represent polar oil components. By diluting the salt content in various manners, we demonstrate that the water contact angle on muscovite, not on silica, decreases by up to 25° as the divalent cation concentration is reduced from typical concentrations in seawater to zero. Decreasing the ionic strength at a constant divalent ion concentration, however, has a negligible effect on the contact angle. We discuss the consequences for the interpretation of core flooding experiments and the identification of a microscopic mechanism of low salinity water flooding, an increasingly popular, inexpensive, and environment-friendly technique for enhanced oil recovery.
Collapse
|
40
|
Klaassen A, Liu F, van den Ende D, Mugele F, Siretanu I. Impact of surface defects on the surface charge of gibbsite nanoparticles. NANOSCALE 2017; 9:4721-4729. [PMID: 28327722 DOI: 10.1039/c6nr09491k] [Citation(s) in RCA: 17] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/07/2023]
Abstract
We use high resolution Atomic Force Microscopy to study the surface charge of the basal plane of gibbsite nanoparticles, with a lateral resolution of approximately 5 nm, in ambient electrolyte of variable pH and salt content. Our measurements reveal surface charge variations on the basal planes that correlate with the presence of topographic defects such as atomic steps. This surface charge heterogeneity, which increases with increasing pH, suggests that for a pH between 6 and 9 the defect sites display a stronger chemical activity than adjacent, apparently atomically smooth regions of the basal plane. Smooth regions display a slight positive surface charge of ≈0.05e per nm2 that hardly varies within this pH range. In contrast, near the topographic defects we observe a much lower charge. Considering the size of the interaction area under the probing tip, this implies that at the defect sites the charge density must be negative, ≈-0.1e per nm2. These measurements demonstrate that surface defects have a large influence on the average surface charge of the gibbsite basal plane. These findings will contribute to understand why surface defects play an important role in various applications, such as fuel cells, chemical synthesis, self-assembly, catalysis and surface treatments.
Collapse
|
41
|
Lima NC, Mishra K, Mugele F. Aberration control in adaptive optics: a numerical study of arbitrarily deformable liquid lenses. OPTICS EXPRESS 2017; 25:6700-6711. [PMID: 28381014 DOI: 10.1364/oe.25.006700] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/07/2023]
Abstract
By means of numerical simulations, using a computational fluid dynamics software together with an optical ray tracing analysis platform, we show that we can tune various optical aberrations by electrically manipulating the shape of liquid lenses using one hundred individually addressable electrodes. To demonstrate the flexibility of our design, we define electrode patterns based on specific Zernike modes and show that aspherical, cylindrical and decentered shapes of liquid lenses can be produced. Using different voltages, we evaluate the tuning range of spherical aberration (Z11), astigmatism (Z5 and Z6) and coma (Z7), while a hydrostatic pressure is applied to control the average curvature of a microlens with a diameter of 1mm. Upon activating all electrodes simultaneously spherical aberrations of 0.15 waves at a pressure of 30Pa can be suppressed almost completely for the highest voltages applied. For astigmatic and comatic patterns, the values of Z5, Z6 and Z7 increase monotonically with the voltage reaching values up to 0.06, 0.06 and 0.2 waves, respectively. Spot diagrams, wavefront maps and modulation transfer function are reported to quantify the optical performance of each lens. Crosstalk and independence of tunability are discussed in the context of possible applications of the approach for general wavefront shaping.
Collapse
|
42
|
Narayanan A, Mugele F, Duits MHG. Mechanical History Dependence in Carbon Black Suspensions for Flow Batteries: A Rheo-Impedance Study. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2017; 33:1629-1638. [PMID: 28122184 PMCID: PMC5333906 DOI: 10.1021/acs.langmuir.6b04322] [Citation(s) in RCA: 17] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/01/2016] [Revised: 01/18/2017] [Indexed: 06/06/2023]
Abstract
We studied the effects of shear and its history on suspensions of carbon black (CB) in lithium ion battery electrolyte via simultaneous rheometry and electrical impedance spectroscopy. Ketjen black (KB) suspensions showed shear thinning and rheopexy and exhibited a yield stress. Shear step experiments revealed a two time scale response. The immediate effect of decreasing the shear rate is an increase in both viscosity and electronic conductivity. In a much slower secondary response, both quantities change in the opposite direction, leading to a reversal of the initial change in the conductivity. Stepwise increases in the shear rate lead to similar responses in the opposite direction. This remarkable behavior is consistent with a picture in which agglomerating KB particles can stick directly on contact, forming open structures, and then slowly interpenetrate and densify. The fact that spherical CB particles show the opposite slow response suggests that the fractal structure of the KB primary units plays an important role. A theoretical scheme was used to analyze the shear and time-dependent viscosity and conductivity. Describing the agglomerates as effective hard spheres with a fractal architecture and using an effective medium approximation for the conductivity, we found the changes in the derived suspension structure to be in agreement with our qualitative mechanistic picture. This behavior of KB in flow has consequences for the properties of the gel network that is formed immediately after the cessation of shear: both the yield stress and the electronic conductivity increase with the previously applied shear rate. Our findings thus have clear implications for the operation and filling strategies of semisolid flow batteries.
Collapse
|
43
|
Andersson D, Bazant M, Bennewitz R, Bocquet L, Bresme F, Brilliantov N, de Wijn AS, Drummond C, Dryfe R, Hillman R, Kornyshev AA, Krämer G, Kulkarni M, Lee A, Li H, Mugele F, Perez Martinez C, Perkin S, Rastei M, Robotham O, Schatz G, Schiffrin D, Tivony R, Urbakh M, Yaroshchuk A. Nanotribology and voltage-controlled friction: general discussion. Faraday Discuss 2017; 199:349-376. [DOI: 10.1039/c7fd90030a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
|
44
|
Bazant M, Bennewitz R, Booth S, Dryfe R, Girault H, Hillman R, Kornyshev AA, Lee A, Lemay S, Mount A, Mugele F, Robotham O, Schatz G, Schiffrin D, Sikdar D, Smirnov E, Tivony R, Urbakh M. Electrovariable nanoplasmonics: general discussion. Faraday Discuss 2017; 199:603-613. [DOI: 10.1039/c7fd90029e] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
|
45
|
Banpurkar AG, Sawane Y, Wadhai SM, Murade CU, Siretanu I, van den Ende D, Mugele F. Spontaneous electrification of fluoropolymer–water interfaces probed by electrowetting. Faraday Discuss 2017; 199:29-47. [DOI: 10.1039/c6fd00245e] [Citation(s) in RCA: 34] [Impact Index Per Article: 4.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/05/2023]
Abstract
Fluoropolymers are widely used as coatings for their robustness, water-repellence, and chemical inertness. In contact with water, they are known to assume a negative surface charge, which is commonly attributed to adsorbed hydroxyl ions. Here, we demonstrate that a small fraction of these ions permanently sticks to surfaces of Teflon AF and Cytop, two of the most common fluoropolymer materials, upon prolonged exposure to water. Electrowetting measurements carried out after aging in water are used to quantify the density of ‘trapped’ charge. Values up to −0.07 and −0.2 mC m−2are found for Teflon AF and for Cytop, respectively, at elevated pH. A similar charge trapping process is also observed upon aging in various non-aqueous polar liquids and in humid air. A careful analysis highlights the complementary nature of electrowetting and streaming potential measurements in quantifying interfacial energy and charge density. We discuss the possible mechanism of charge trapping and highlight the relevance of molecular scale processes for the long term stability and performance of fluoropolymer materials for applications in electrowetting and elsewhere.
Collapse
|
46
|
Mishra K, Mugele F. Numerical analysis of electrically tunable aspherical optofluidic lenses. OPTICS EXPRESS 2016; 24:14672-14681. [PMID: 27410619 DOI: 10.1364/oe.24.014672] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/06/2023]
Abstract
In this work, we use the numerical simulation platform Zemax to investigate the optical properties of electrically tunable aspherical liquid lenses, as we recently reported in an experimental study [<author order="1"> <name> <first>K.</first> <last>Mishra</last> </name> </author> <author order="2"> <name> <first>C.</first> <last>Murade</last> </name> </author> <author order="3"> <name> <first>B.</first> <last>Carreel</last> </name> </author> <author order="4"> <name> <first>I.</first> <last>Roghair</last> </name> </author> <author order="5"> <name> <first>J. M.</first> <last>Oh</last> </name> </author> <author order="6"> <name> <first>G.</first> <last>Manukyan</last> </name> </author> <author order="7"> <name> <first>D.</first> <last>van den Ende</last> </name> </author> <author order="8"> <name> <first>F.</first> <last>Mugele</last> </name> </author>, "Optofluidic lens with tunable focal length and asphericity," Sci. Rep.4, 6378 (2014)]. Based on the measured lens profiles in the presence of an inhomogeneous electric field and the geometry of the optical device, we calculate the optical aberrations, focusing in particular on the Z11 Zernike coefficient of spherical aberration obtained at zero defocus (Z4). Focal length and spherical aberrations are calculated for a wide range of control parameters (fluid pressure and electric field), parallel with the experimental results. Similarly, the modulation transfer function (MTF), image spot diagrams, Strehl's ratio, and peak-to-valley (P-V) and root mean square (RMS) wavefront errors are calculated to quantify the performance of our aspherical liquid lenses. We demonstrate that the device concept allows compensation for a wide range of spherical aberrations encountered in optical systems.
Collapse
|
47
|
Mishra K, van den Ende D, Mugele F. Recent Developments in Optofluidic Lens Technology. MICROMACHINES 2016; 7:mi7060102. [PMID: 30404276 PMCID: PMC6190348 DOI: 10.3390/mi7060102] [Citation(s) in RCA: 34] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/23/2016] [Revised: 06/06/2016] [Accepted: 06/06/2016] [Indexed: 12/02/2022]
Abstract
Optofluidics is a rapidly growing versatile branch of adaptive optics including a wide variety of applications such as tunable beam shaping tools, mirrors, apertures, and lenses. In this review, we focus on recent developments in optofluidic lenses, which arguably forms the most important part of optofluidics devices. We report first on a number of general characteristics and characterization methods for optofluidics lenses and their optical performance, including aberrations and their description in terms of Zernike polynomials. Subsequently, we discuss examples of actuation methods separately for spherical optofluidic lenses and for more recent tunable aspherical lenses. Advantages and disadvantages of various actuation schemes are presented, focusing in particular on electrowetting-driven lenses and pressure-driven liquid lenses that are covered by elastomeric sheets. We discuss in particular the opportunities for detailed aberration control by using either finely controlled electric fields or specifically designed elastomeric lenses.
Collapse
|
48
|
Bera B, Duits MHG, Cohen Stuart MA, van den Ende D, Mugele F. Surfactant induced autophobing. SOFT MATTER 2016; 12:4562-4571. [PMID: 27102975 DOI: 10.1039/c6sm00128a] [Citation(s) in RCA: 16] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
Surfactant adsorption in a three-phase system and its influence on wetting properties are relevant in various applications. Here, we report a hitherto not observed phenomenon, namely the retraction of an aqueous drop on hydrophilic solid substrates (which we refer to as 'autophobing') in ambient oil containing water-insoluble fatty acids, caused by the deposition of these fatty acids from the ambient oil onto the solid substrate. AFM measurements confirm that the surfactant is deposited on the solid by the moving contact line. This leads to a more hydrophobic substrate, the retraction of the contact line and a concomitant increase in the contact angle. The deposition process is enabled by the formation of a reaction product between deprotonated fatty acids and Ca(2+) ions at the oil/water interface. We investigate how the transition to a new equilibrium depends on the concentrations of the fatty acids, the aqueous solute, the chain lengths of the fatty acid, and the types of alkane solvent and silica or mica substrates. This phenomenon is observed on both substrates and for all explored combinations of fatty acids and solvents and thus appears to be generic. In order to capture the evolution of the contact angle, we develop a theoretical model in which the rate of adsorption at the oil-water interface governs the overall kinetics of autophobing, and transfer to the solid is determined by a mass flux balance (similar to a Langmuir Blodgett transfer).
Collapse
|
49
|
Wang L, Zhao C, Wijnperlé D, Duits MHG, Mugele F. Design of a hybrid advective-diffusive microfluidic system with ellipsometric detection for studying adsorption. BIOMICROFLUIDICS 2016; 10:034113. [PMID: 27375818 PMCID: PMC4902818 DOI: 10.1063/1.4953105] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/10/2016] [Accepted: 05/19/2016] [Indexed: 06/06/2023]
Abstract
Establishing and maintaining concentration gradients that are stable in space and time is critical for applications that require screening the adsorption behavior of organic or inorganic species onto solid surfaces for wide ranges of fluid compositions. In this work, we present a design of a simple and compact microfluidic device based on steady-state diffusion of the analyte, between two control channels where liquid is pumped through. The device generates a near-linear distribution of concentrations. We demonstrate this via experiments with dye solutions and comparison to finite-element numerical simulations. In a subsequent step, the device is combined with total internal reflection ellipsometry to study the adsorption of (cat)ions on silica surfaces from CsCl solutions at variable pH. Such a combined setup permits a fast determination of an adsorption isotherm. The measured optical thickness is compared to calculations from a triple layer model for the ion distribution, where surface complexation reactions of the silica are taken into account. Our results show a clear enhancement of the ion adsorption with increasing pH, which can be well described with reasonable values for the equilibrium constants of the surface reactions.
Collapse
|
50
|
Siretanu I, van den Ende D, Mugele F. Atomic structure and surface defects at mineral-water interfaces probed by in situ atomic force microscopy. NANOSCALE 2016; 8:8220-8227. [PMID: 27030282 DOI: 10.1039/c6nr01403h] [Citation(s) in RCA: 18] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
Atomic scale details of surface structure play a crucial role for solid-liquid interfaces. While macroscopic characterization techniques provide averaged information about bulk and interfaces, high resolution real space imaging reveals unique insights into the role of defects that are believed to dominate many aspects of surface chemistry and physics. Here, we use high resolution dynamic Atomic Force Microscopy (AFM) to visualize and characterize in ambient water the morphology and atomic scale structure of a variety of nanoparticles of common clay minerals adsorbed to flat solid surfaces. Atomically resolved images of the (001) basal planes are obtained on all materials investigated, namely gibbsite, kaolinite, illite, and Na-montmorillonite of both natural and synthetic origin. Next to regions of perfect crystallinity, we routinely observe extended regions of various types of defects on the surfaces, including vacancies of one or few atoms, vacancy islands, atomic steps, apparently disordered regions, as well as strongly adsorbed seemingly organic and inorganic species. While their exact nature is frequently difficult to identify, our observations clearly highlight the ubiquity of such defects and their relevance for the overall physical and chemical properties of clay nanoparticle-water interfaces.
Collapse
|