7X multiplexed, optofluidic detection of nucleic acids for antibiotic-resistance bacterial screening

Rapid and accurate diagnosis of bacterial infections resistant to multiple antibiotics requires development of new bio-sensors for differentiated detection of multiple targets. This work demonstrates 7x multiplexed detection for antibiotic-resistance bacterial screening on an optofluidic platform. We utilize spectrally multiplexed multi-spot excitation for simultaneous detection of nucleic acid strands corresponding to bacterial targets and resistance genes. This is enabled by multi-mode interference (MMI) waveguides integrated in an optofluidic device. We employ a combinatorial three-color labeling scheme for the nucleic acid assays to scale up their multiplexing capability to seven different nucleic acids, representing three species and four resistance genes.

3× multiplexed detection of antibiotic resistant plasmids with single molecule sensitivity

Bacterial pathogens resistant to antibiotics have become a serious health threat. Those species which have developed resistance against multiple drugs such as the carbapenems, are more lethal as these are last line therapy antibiotics. Current diagnostic tests for these resistance traits are based on singleplex target amplification techniques which can be time consuming and prone to errors. Here, we demonstrate a chip based optofluidic system with single molecule sensitivity for amplification-free, multiplexed detection of plasmids with genes corresponding to antibiotic resistance, within one hour. Rotating disks and microfluidic chips with functionalized polymer monoliths provided the upstream sample preparation steps to selectively extract these plasmids from blood spiked with E. coli DH5α cells. Waveguide-based spatial multiplexing using a multi-mode interference waveguide on an optofluidic chip was used for parallel detection of three different carbapenem resistance genes. These results point the way towards rapid, amplification-free, multiplex analysis of antibiotic-resistant pathogens.

A device-based stretch training for office workers resulted in increased range of motion especially at limited baseline flexibility

BACKGROUND

It is unclear whether and under which conditions stretch training programs lead to gains in flexibility when applied in work health promotion for office workers in order to reduce musculoskeletal disorders (MSD).

OBJECTIVE

The aim of this study was to analyze whether the stretch training "five-Business" leads to gains in range of motion (ROM). Furthermore, the influence of baseline flexibility and socio-demographic factors (sex, age, weight, height and body mass index (BMI)) on trainability was assessed.

METHODS

161 office workers (n = 45 female; n = 116 male) without major MSD were recruited. Over three months, a standardized static stretch training ("five-Business") was executed on a device, supervised twice per week for 10 min. ROM was assessed using a digital inclinometer (shoulder, hip and trunk extension) and a tape measure (fingertip-to-floor and lateral inclination).

RESULTS

ROM gains (p≤0.001) were present in all tests, except for the hip extension. ROM changes correlated moderately (0.24-0.62) with the baseline flexibility (p≤0.001). Subjects with limited flexibility reached the largest gains (1.41-25.33%). Regarding the socio-demographic factors only one low correlation occurred (weight - retroflexion; -0.177).

CONCLUSION

The "five-Business" stretch training effectively increases ROM in office workers, especially when baseline flexibility is limited.

Experimental and numerical investigations of mechanical displacements in surface acoustic wave bounded beams

The present paper studies experimentally and numerically the surface acoustic wave (SAW) field on a piezoelectric substrate generated by interdigital transducers (IDT). On the one hand, mechanical displacements produced by the SAW are measured with the help of a laser Doppler vibrometer. On the other hand, mechanical displacements are computed by the two-dimensional finite element method in frequency domain followed by the spatial Fourier transform. Combining these two steps of computations results in the intended two-dimensional distribution of mechanical displacements on the substrate surface. The comparison of experimental and numerical data obtained for a series of different IDTs reveals that it is possible to estimate the shape of the SAW beam and the absolute value of mechanical displacement amplitude using only the basic parameters of the IDT and its electrical admittance measured by a network analyzer.

The complexity of surface acoustic wave fields used for microfluidic applications

Using surface acoustic waves (SAW) for the agitation and manipulation of fluids and immersed particles or cells in lab-on-a-chip systems has been state of the art for several years. Basic tasks comprise fluid mixing, atomization of liquids as well as sorting and separation (or trapping) of particles and cells, e.g. in so-called acoustic tweezers. Even though the fundamental principles governing SAW excitation and propagation on anisotropic, piezoelectric substrates are well-investigated, the complexity of wave field effects including SAW diffraction, refraction and interference cannot be comprehensively simulated at this point of time with sufficient accuracy. However, the design of microfluidic actuators relies on a profound knowledge of SAW propagation, including superposition of multiple SAWs, to achieve the predestined functionality of the devices. Here, we present extensive experimental results of high-resolution analysis of the lateral distribution of the complex displacement amplitude, i.e. the wave field, alongside with the electrical S-parameters of the generating transducers. These measurements were carried out and are compared in setups utilizing travelling SAW (tSAW) excited by single interdigital transducer (IDT), standing SAW generated between two IDTs (1DsSAW, 1D acoustic tweezers) and between two pairs of IDTs (2DsSAW, 2D acoustic tweezers) with different angular alignment in respect to pure Rayleigh mode propagation directions and other practically relevant orientations. For these basic configurations, typically used to drive SAW-based microfluidics, the influence of common SAW phenomena including beam steering, coupling coefficient dispersion and diffraction on the resultant wave field is investigated. The results show how tailoring of the acoustic conditions, based on profound knowledge of the physical effects, can be achieved to finally realize a desired behavior of a SAW-based microacoustic-fluidic system.

OP0130 IN VITRO CHARACTERIZATION OF INFLAMMATORY ARTHRITIS ASSOCIATED WITH IMMUNE CHECK POINT INHIBITION

Background:

During cancer treatment with immune checkpoint inhibitors (ICI) such as the anti-PD-1 antibody pembrolizumab, 2-4% of patients develop inflammatory arthritis as an immune related adverse event and half of patients with pre-existing inflammatory arthritis have disease flares. This type of adverse events shows striking similarities with traditional immune mediated inflammatory arthritis. However, the underlying immunological mechanisms of inflammatory arthritis associated with ICI are not fully understood.

Objectives:

We aimed to develop an in vitro model of inflammatory arthritis associated with ICI, and to use this model to investigate monocyte differentiation and activation following treatment with pembrolizumab.

Methods:

First, synovial fluid mononuclear cells (SFMCs) and peripheral blood mononuclear cells (PBMCs) from patients with immune mediated inflammatory arthritis (rheumatoid arthritis and peripheral spondyloarthritis, n=22) and PBMCs from healthy controls were incubated with pembrolizumab and assessed for monocyte chemoattractant protein 1 (MCP-1) secretion by ELISA. Then, cytokine production in SFMCs was studied in more detail by the multiplex V-PLEX proinflammatory panel and by intracellular flow cytometry. Finally, pembrolizumab treated SFMCs were incubated with the different disease modifying anti-rheumatic drugs adalimumab, tocilizumab, tofacitinib, and baricitinib.

Results:

Pembrolizumab significantly increased MCP-1 production in the SFMCcultures (P=0.0031). In contrast, pembrolizumab did not change MCP-1 production by PBMCs from neither patients nor healthy controls (P=0.77 and P=0.43). Pembrolizumab also increased the production of TNFα (P=0.049), IFNγ (P=0.047), and IL-12p70 (P=0.031), but did not change the production of IL-6 (P=0.98). Among SFMCs treated with pembrolizumab there was an increased frequency of intermediate monocytes (P=0.044). Interestingly, pembrolizumab also increased the MCP-1 production within the intermediate monocytes only (P=0.028). In contrast, among SFMCs treated with LPS, only the classical monocyte subset was increased (P=0.0045) and MCP-1 production increased in both intermediate and classical monocyte subsets. Lastly, the TNFα inhibitor adalimumab and the Janus kinase inhibitors baricitinib and tofacitinib attenuated the pembrolizumab-induced MCP-1 production (P=0.0004, P=0.033, and P=0.025, respectively) while this was not seen with the IL-6 inhibitor tocilizumab (P=0.75).

Conclusion:

We have developed a very simple in vitro model of inflammatory arthritis associated with ICI. Using this model, we found that pembrolizumab specifically activated intermediate monocytes and induced TNFα, IFNγ, and IL-12p70 production, whereas IL-6 was unchanged. These findings were supported by effectful reduction of MCP-1 secretion with TNFα inhibition but not with IL-6 inhibition. This model could potentially be used to further study the effects of ICIs and the underlying immunological mechanisms of inflammatory arthritis associated with ICI.

References:

None.

Disclosure of Interests:

Anne Sofie Sørensen: None declared, Morten Nørgaard Andersen: None declared, Kristian Juul-Madsen: None declared, Cæcilie Skejø: None declared, Henrik Schmidt: None declared, Thomas Vorup-Jensen: None declared, Tue Wenzel Kragstrup Shareholder of: iBio Tech ApS, Consultant of: Bristol-Myers Squibb, Speakers bureau: TWK has engaged in educational activities talking about immunology in rheumatic diseases receiving speaking fees from Pfizer, Bristol-Myers Squibb, Eli Lilly, Novartis, and UCB.

1249Acute efficacy and safety of pulmonary vein isolation for atrial fibrillation in patients alternatively assigned to high power short duration (70W, 8s) vs lesion index guided (35W) ablation

Background

permanent trans-mural lesions not affecting surrounding anatomical structures is the goal of safe and effective wide antral pulmonary vein (PV) isolation in patients with paroxysmal and persistent atrial fibrillation (AF) undergoing catheter ablation (CA). Time, energy and contact force are parameters related to lesion goodness and incorporated in a complex formula (i.e. the lesion index, LSI™, Abbott). This parameter is emerging as the gold standard for PV isolation. Recently, the shallower but wider lesions created by high power short duration (HPSD) ablation has came to attention.

Purpose

to compare acute reconnection rate, procedural  parameters, and complication rates in patients with paroxysmal or persistent AF undergoing CA.

Methods

one-hundred patients with paroxysmal and 100 with persistent AF will be alternatively assigned to undergo PV isolation with the FlexAbility™ (HPSD group, 70W, 41°, 8 seconds) or the TactiCath™ (LSI-group: 35W, 41°, LSI: 5-5.5 posterior wall, up to ≥6 anywhere else) catheter. A 3-D mapping system (Ensite Precision™) and a steerable sheath (Agilis™, both Abbott) were always used. Adenosine (30mg) is given after PV isolation and ≥ 20 minutes waiting time. Posterior wall isolation was added in all, and patients with persistent AF were additionally treated with mitral and cavotricuspid isthmus ablation. Results: between June and October 2019, 71 patients (68 ± 10 years old, 32 (45%) female, 44 (60%) paroxysmal AF, AF duration 58 ± 81 months) were alternatively assigned to HPSD (36, 51%) or LSI-guided (35, 49%) ablation. No difference in clinical characteristics was found between groups. After 44 ± 18 and 30 ± 14min of procedural and RF time, all PVs were isolated, and all 17 (24%) reconnections treated with an additional 4 ± 3 and 3 ± 2min, respectively. In 8 ± 3 and 7 ± 3 min of procedural and RF time, the PW was successfully isolated in all. PV isolation (34 ± 12min vs. 56 ± 16min; P<.0001), RF (18 ± 5min vs. 41 ± 9min; P<.0001), and total procedural (138 ± 34min vs. 162 ± 34min; P=.0026) time were shorter in the HPSD group. X-Ray time and effective dose did not differ. A similar rate of acute reconnections (9, 25% vs. 8 23%) was found when HPSD and LSI were compared. A higher, although statistically not significant, number of steam pops was observed in the HPSD (14, 39%) vs. LSI (8, 23%) group, possibly related to the higher incidence of moderate pericardial effusion (>0.5mm, <20mm) found the day following the ablation (10, 28% vs. 2, 6%; P=.0238). No further complications related to CA were detected.

Conclusions

in patients with paroxysmal and persistent AF undergoing their first CA, HPSD ablation is faster than an LSI-guided approach. Acute efficacy (reconnection rate) is similar. Although a higher rate of haemodynamically non-relevant pericardial effusions were seen in the HPSD group, these were all treated medically and the general safety profile of this approach is excellent and comparable to LSI ablation.

1247Similar rate of thermal esophageal lesions are found in patients alternatively assigned to high power short duration (70W, 8s) vs. lesion index guided (35W) ablation for atrial fibrillation

Background

wide antral pulmonary vein (PV) catheter ablation (CA) in patients with atrial fibrillation (AF) is safe and effective when permanent trans-mural lesions are achieved without causing harm to surrounding anatomical structures. Atrio-esophageal fistula, due to its high mortality, is the most dreadful complication related to CA for AF, therefore alternative radiofrequency (RF) approaches to reduce or eliminate this complication are currently studied. The shallower but wider lesions of high power short duration (HPSD) ablation might represent a safe alternative.

Purpose

to compare the rate of thermal esophageal lesions in patients with paroxysmal and persistent AF undergoing CA assigned to the 2 different RF modality.

Methods

one-hundred patients with paroxysmal and 100 with persistent AF will be alternatively assigned to undergo CA with the FlexAbility™ (HPSD group: 70W, 41°, 8 seconds) or the TactiCath™ (LSI-group: 35W, 41°, LSI: 5-5.5 posterior wall, up to 6 anywhere else) catheter. A 3-D mapping system, a steerable sheath and adenosine-test (30mg) were used in all patients. Posterior wall (PW) isolation in addition to PV isolation was performed in all, and patients with persistent AF were additionally treated with mitral and cavotricuspid isthmus ablation. Insertion of an esophageal probe was always attempted, and all patients underwent upper endoscopy 24 to 48 hours after CA.

Results

between June and October 2019, 71 patients (68 ± 10 years old, 32 (45%) female, 44 (60%) paroxysmal AF, AF duration 58 ± 81 months) were alternatively assigned to HPSD (36, 51%) or LSI-guided (35, 49%) ablation. No differences in clinical characteristics were found between groups. After 45 ± 18min and 30 ± 14 min of procedural and RF time, all PVs were isolated, and all spontaneous and adenosine-induced reconnections treated. Successful PW isolation was achieved with an additional 8 ± 3 and 7 ± 3 min of procedural and RF time. When HPSD and LSI-guided groups are compared, a similar rate of clinically non-relevant and self-healing thermal lesions at endoscopy was found (10, 27.8% vs. 10, 28.6%). Independent of the treatment group, a higher peak temperature identified patients with esophageal lesions (43.2° vs. 42°; P=.0065). A peak temperature value of 43.1° best identify patients most likely to develop thermal lesions (AUC 0.71, SE 84%, SP 39%). Interestingly, none of the 11 patients in whom esophageal probe insertion was not possible or attempted developed thermal lesions in comparison to 20 (33%) patients who underwent esophageal temperature monitoring (P=.0046). Conclusions: no difference in thermal induced esophageal lesions were found when the two different RF approach (HPSD vs. LSI guided) were compared. Interestingly, lack of temperature monitoring with an esophageal probe is associated with no thermal lesions at endoscopy.

Peripancreatic abscess supported by Bordetella hinzii

We report a novel case of an infection with Bordetella hinzii, a pathogen usually detected in poultry, supporting a peripancreatic abscess formation as a complication of an acute necrotizing pancreatitis.

P1728Cardiogenic shock patients: those with and those without out-of-hospital cardiac arrest are different clinical entities

Introduction

Cardiogenic shock (CS) due to myocardial infarction (MI) carries 30-day mortality rates as high as 50%. The vast majority of study cohorts assessing mortality in CS comprise both patients presenting with and without out-of-hospital cardiac arrest (OHCA). Patients with and without OHCA are likely to represent two distinctive entities, which may be problematic to combine in an intervention trial.

Purpose

The aim of the study was to compare CS due to MI patients presenting with and without OHCA in terms of patient characteristics and outcome.

Methods

In the period from 2010–2017 all patients admitted at two tertiary heart centres in Denmark with CS following MI were individually identified and validated through patient records. The two centres have a catchment area of 3.9 million citizens corresponding to two-thirds of the Danish population.

Results

A total of 1716 CS patients were identified, of which 42% presented with OHCA. OHCA patients were younger (mean 63 vs 67 years), more frequently male (85 vs 67%), had higher lactate concentration (median 6.2 vs 5.0 mmol/L) on admission and higher left ventricular ejection fraction (median 30 vs 25%) compared to patients without OHCA (p<0.0001 for all). Patients presenting with OHCA had lower 30-day mortality compared to patients without OHCA (49% vs. 57%, respectively, plogrank<0.0001, Figure). Cause of in hospital death differed markedly between the two groups. Not surprisingly, anoxic brain damage was the leading cause of in hospital death in the OHCA group (56%) and only seen in 4% of patients without OHCA. In contrast, cardiac failure was the main cause of death in hospital death among patients without OHCA (60%), compared to 27% in patients with OHCA (p<0.0001).

Figure 1

Conclusion

Among patients with CS due to MI, overall 30-day mortality was significantly lower in patients presenting with OHCA. Anoxic brain damage was the main cause of in hospital death among OHCA patients, whereas fatal heart failure prevailed in patients without OHCA. Combining these two groups in a single trial with one specific intervention seems inappropriate and likely to cause an imbalance in the signal-to-noise ratio.

Acknowledgement/Funding

The Danish Heart Foundation and a research grant from Abiomed

P342Time-to-isolation-guided cryoballoon pulmonary vein isolation reduces esophageal and mediastinal alterations detected by endoscopic ultrasound

Background

Pulmonary vein isolation (PVI) is recommended for treatment of symptomatic atrial fibrillation. Cryoballoon ablation is an emerging safe and efficient technique for achieving PVI. Nevertheless, structural alterations of the mediastinum and/or the oesophagus, which seem to be associated with an increased risk of the lethal complication of an atrio-oesophageal fistula, have been described.

Purpose

MADE-PVI (Mediastino-oesophageal Alterations Detected by Endosonography after PVI) aimed at evaluating safety of cryoballoon PVI in relation to two different freeze protocols. As a time-to-isolation (TTI)-guided protocol has been reported to be as effective as a conventional “two freeze protocol”, we hypothesized that a TTI-guided protocol causes less peri-atrial and -oesophageal lesions.

Methods

70 consecutive patients were scheduled for de novo cryoballoon (2nd generation) PVI employing either a conventional freeze protocol (Group A: n=35: 2x180s per vein) or a TTI-guided approach (Group B: n=35; freeze time: TTI+120s per vein or 1x180s in case TTI could not be measured). Structural oesophageal and mediastinal alterations (e.g. ulceration, oedema) were assessed by endoscopy and endosonography blinded prior and post ablation.

Results

Irrespective of used freeze protocol, ablation significantly increased atrio-oesophageal distances, including distance to left and right inferior pulmonary vein ostia as well as to the posterior wall of the left atrium (all p<0.001). In general, postinterventional mediastinal oedematous alterations were detected in 47 patients (70%) with a mean size of 14mm (± 0.9 mm), while only 10 patients (15%) revealed a large mediastinal oedema >20mm. Oesophageal thermal lesions occurred in 3 patients (4%) including 1 deep ulceration, which coincided with a large mediastinal oedema. The two freeze protocols had a distinct impact on mediastinal lesions as mean size of oedematous alterations and occurrence of large mediastinal oedema were significantly increased in Group A vs. Group B (17 mm vs. 11 mm, p<0.001; 26% vs. 6%, p=0.029). Furthermore, every oesophageal lesion was detected in patients in group A. Nonetheless, no major complication occurred in either group.

Conclusions

The present prospective study clearly demonstrates a significant impact of freeze protocol on post-interventional mediastino-oesophageal alterations. A TTI-guided protocol employing 2nd generation cryoballoon reduces mediastino-oesophageal lesions and may reduce complications.

Acknowledgement/Funding

This study was supported by Medtronic by an unrestricted grant (A 1351459).

Optical trapping assisted detection rate enhancement of single molecules on a nanopore optofluidic chip

We use optical trapping to deliver molecular targets to the vicinity of a nanopore for high-throughput single molecule analysis on an optofluidic chip. DNA detection rates increase over 80× to enable detection at attomolar concentrations.

On demand delivery and analysis of single molecules on a programmable nanopore-optofluidic device

Nanopore-based single nanoparticle detection has recently emerged as a vibrant research field with numerous high-impact applications. Here, we introduce a programmable optofluidic chip for nanopore-based particle analysis: feedback-controlled selective delivery of a desired number of biomolecules and integration of optical detection techniques on nanopore-selected particles. We demonstrate the feedback-controlled introduction of individual biomolecules, including 70S ribosomes, DNAs and proteins into a fluidic channel where the voltage across the nanopore is turned off after a user-defined number of single molecular insertions. Delivery rates of hundreds/min with programmable off-times of the pore are demonstrated using individual 70S ribosomes. We then use real-time analysis of the translocation signal for selective voltage gating of specific particles from a mixture, enabling selection of DNAs from a DNA-ribosome mixture. Furthermore, we report optical detection of nanopore-selected DNA molecules. These capabilities point the way towards a powerful research tool for high-throughput single-molecule analysis on a chip.