Measurement of b hadron lifetimes in exclusive decays containing a J/ψ in pp collisions at √s=1.96 TeV

We report on a measurement of b-hadron lifetimes in the fully reconstructed decay modes B(+)→J/ψK(+), B⁰→J/ψK*(892)⁰, B⁰→J/ψK(s)⁰, and Λ(b)⁰→J/ψΛ⁰ using data corresponding to an integrated luminosity of 4.3 fb⁻¹, collected by the CDF II detector at the Fermilab Tevatron. The measured lifetimes are τ(B(+))=[1.639±0.009(stat)±0.009(syst)] ps, τ(B⁰)=[1.507±0.010(stat)±0.008(syst)] ps, and τ(Λ(b)⁰)=[1.537±0.045(stat)±0.014(syst)] ps. The lifetime ratios are τ(B(+))/τ(B⁰)=[1.088±0.009(stat)±0.004(syst)] and τ(Λ(b)⁰)/τ(B⁰)=[1.020±0.030(stat)±0.008(syst)]. These are the most precise determinations of these quantities from a single experiment.

High-power distributed Bragg reflector ridge-waveguide diode laser with very small spectral linewidth

We manufactured and investigated distributed Bragg reflector ridge-waveguide diode lasers having sixth-order surface gratings and an emission wavelength around 974 nm. The single-mode output power of the lasers with a total length of 4 mm exceeded 1 W. A very small spectral linewidth of 1.4 MHz (3 dB) consisting of a Lorentzian part of 146 kHz and a Gaussian part of 1308 MHz was measured using a self-delayed heterodyne measurement technique.

Tapered lasers emitting at 650 nm with 1 W output power with nearly diffraction-limited beam quality

High-brightness tapered lasers emitting around 650 nm were developed. Devices 2 mm long with a200-microm-long straight section, 1800-microm-long tapered section, and 4 degrees taper angle reached 1 W output power in CW operation with a nearly diffraction-limited beam quality.

Search for Gluino-Mediated Bottom Squark Production in pp[over ] Collisions at sqrt[s]=1.96 TeV

We report on a search for the supersymmetric partner of the bottom quark produced from gluino decays in data from 2.5 fb;{-1} of integrated luminosity collected by the Collider Detector at Fermilab at sqrt[s]=1.96 TeV. Candidate events are selected requiring two or more jets and large missing transverse energy. At least two of the jets are required to be tagged as originating from a b quark to enhance the sensitivity. The results are in good agreement with the prediction of the standard model processes, giving no evidence for gluino decay to bottom squarks. This result constrains the gluino-pair-production cross section to be less than 40 fb at 95% credibility level for a gluino mass of 350 GeV/c;{2}.

High-power 808 nm ridge-waveguide diode lasers with very small divergence, wavelength-stabilized by an external volume Bragg grating

We present data on ridge-waveguide diode lasers having a vertical far-field divergence of only 11.5 degrees (FWHM) owing to an appropriate waveguide design. The lasers emitted an optical power of more than 1 W into the spatial fundamental mode from a ridge width of 5 microm. The emission wavelength was stabilized to a narrow range around 808 nm by placing a volume Bragg grating in front of the outcoupling facet.

Search for the decays B_{(s)};{0} --> e;{+} micro;{-} and B_{(s)};{0} --> e;{+} e;{-} in CDF run II

We report results from a search for the lepton flavor violating decays B_{s};{0} --> e;{+} micro;{-} and B;{0} --> e;{+} micro;{-}, and the flavor-changing neutral-current decays B_{s};{0} --> e;{+} e;{-} and B;{0} --> e;{+} e;{-}. The analysis uses data corresponding to 2 fb;{-1} of integrated luminosity of pp[over ] collisions at sqrt[s] = 1.96 TeV collected with the upgraded Collider Detector (CDF II) at the Fermilab Tevatron. The observed number of B0 and B_{s};{0} candidates is consistent with background expectations. The resulting Bayesian upper limits on the branching ratios at 90% credibility level are B(B_{s};{0} --> e;{+} micro;{-}) < 2.0 x 10;{-7}, B(B;{0} --> e;{+} micro;{-}) < 6.4 x 10;{-8}, B(B_{s};{0} --> e;{+} e;{-}) < 2.8 x 10;{-7}, and B(B;{0} --> e;{+} e;{-}) < 8.3 x 10;{-8}. From the limits on B(B_{(s)};{0} --> e;{+} micro;{-}), the following lower bounds on the Pati-Salam leptoquark masses are also derived: M_{LQ}(B_{s};{0} --> e;{+} micro;{-}) > 47.8 TeV/c;{2}, and M_{LQ}(B;{0} --> e;{+} micro;{-}) > 59.3 TeV / c;{2}, at 90% credibility level.

High-power laser diodes emitting light above 1100 nm with a small vertical divergence angle of 13 degrees

Laser diodes with highly strained InGaAs quantum wells, emitting at 1130 nm, embedded in a GaAs waveguide were investigated. This Letter reviews the design of the vertical structure for enclosing high output power in angles smaller than 18 degrees . Example designs were processed to 200 microm stripe-width lasers with an 8-mm-long optical cavity. When these are mounted on C mounts, they give an output power of 38 W under quasi-cw operation from a single emitter.

Sustainability assessment of advanced wastewater treatment technologies

As a consequence of the EU Water Framework Directive more focus is now on discharges of hazardous substances from wastewater treatment plants and sewers. Thus, many municipalities in Denmark may have to adopt to future advanced treatment technologies. This paper describes a holistic assessment, which includes technical, economical and environmental aspects. The technical and economical assessment is performed on 5 advanced treatment technologies: sand filtration, ozone treatment, UV exclusively for disinfection of pathogenic microorganisms, membrane bioreactor (MBR) and UV in combination with advanced oxidation. The technical assessment is based on 12 hazardous substances comprising heavy metals, organic pollutants, endocrine disruptors as well as pathogenic microorganisms. The environmental assessment is performed by life cycle assessment (LCA) comprising 9 of the specific hazardous substances and three advanced treatment methods; sand filtration, ozone treatment and MBR. The technical and economic assessment showed that UV solely for disinfection purposes or ozone treatment is the most advantageous advanced treatment methods if the demands are restricted to pathogenic microorganisms. In terms of sustainability, sand filtration is the most advantageous method based on the technical and environmental assessment due to the low energy consumption and high efficiency with regards to removal of heavy metals.

Weighing environmental advantages and disadvantages of advanced wastewater treatment of micro-pollutants using environmental life cycle assessment

Much research and development effort is directed towards advances in municipal wastewater treatment aiming at reducing the effluent content of micro-pollutants and pathogens. The objective is to further reduce the eco-toxicity, hormone effects and pathogenic effects of the effluent. Such further polishing of the effluent, however, involves an environmental trade-off: the reduction in eco-toxicity, hormone effects, etc. will happen at the expense of increased resource- and energy consumption. Obviously, at some point of further advances, there must be an 'environmental break-even'. This trade-off was investigated using Life Cycle Assessment (LCA) methodology and based on a literature review of advanced treatment performance. The LCA evaluation comprised sand filtration, ozonation and MBRs and assessed the effect of extending existing tertiary treatment with these technologies on a variety of micro-pollutants being: heavy metals (Cd, Pb, Ni), endocrine disruptors (E2 and EE2), PAH, DEHP, and detergents (LAS & NPE). It was found, in some of the studied scenarios, that more environmental impact may be induced than removed by the advanced treatment. The study showed that for the 3 technologies, sand filtration has the best balance between prevented and induced impacts, and sand filtration proved to have a net environmental benefit under the assumptions used in the study. But the outcome of the study suggests that this is not always the case for ozonation and MBR.

High-power 894 nm monolithic distributed-feedback laser

A ridge-waveguide InGaAs/GaAsP laser, emitting up to 250 mW in a single lateral and longitudinal mode at a wavelength of 894 nm, is presented. The distributed feedback is provided by a second order grating, formed into an InGaP/GaAs/InGaP multilayer structure. Owing to the stable lasing frequency, the large side mode suppression ratio (> 40 dB) and small spectral line width (< 200 kHz) the diode laser is well suited for caesium D1 spectroscopy. This was verified by the measurement of the hyperfine structure of the D1 line.

Paper waste - recycling, incineration or landfilling? A review of existing life cycle assessments

A review of existing life cycle assessments (LCAs) on paper and cardboard waste has been undertaken. The objectives of the review were threefold. Firstly, to see whether a consistent message comes out of published LCA literature on optimum disposal or recycling solutions for this waste type. Such message has implications for current policy formulation on material recycling and disposal in the EU. Secondly, to identify key methodological issues of paper waste management LCAs, and enlighten the influence of such issues on the conclusions of the LCA studies. Thirdly, in light of the analysis made, to discuss whether it is at all valid to use the LCA methodology in its current development state to guide policy decisions on paper waste. A total of nine LCA studies containing altogether 73 scenarios were selected from a thorough, international literature search. The selected studies are LCAs including comparisons of different management options for waste paper. Despite claims of inconsistency, the LCAs reviewed illustrate the environmental benefits in recycling over incineration or landfill options, for paper and cardboard waste. This broad consensus was found despite differences in geographic location and definitions of the paper recycling/disposal systems studied. A systematic exploration of the LCA studies showed, however, important methodological pitfalls and sources of error, mainly concerning differences in the definition of the system boundaries. Fifteen key assumptions were identified that cover the three paper cycle system areas: raw materials and forestry, paper production, and disposal/recovery. It was found that the outcome of the individual LCA studies largely depended on the choices made in some of these assumptions, most specifically the ones concerning energy use and generation, and forestry.

[Costs of diabetes mellitus type 2 and self measurement of blood glucose in Germany]

It is extremely difficult to assess the prevalence and the total costs of diabetes mellitus for the German health care system. The last sound assessment of the total costs is based on the CODE-2 study, although this study reflects the situation in 1998.

METHODS

In this paper we assess again the total costs of diabetes mellitus type 2 and self measurement of blood glucose (SMBG) for the German healthcare system, based on the analysis of a recently published retrospective, multicentre trial dealing with the impact of SMBG on long-term patient outcomes.

RESULTS

Overall, yearly costs for the treatment of diabetes mellitus type 2 and its complications amount to Euro 3 196,-per patient. This equals 4.6% to 8.2% of the German healthcare expenditure, in relation to the estimated prevalence of the disease in Germany. The cost difference between the cohorts with and without SMBG was not essential (Euro 290,-higher costs in the cohort with SMBG).

CONCLUSIONS

From a public health standpoint, prevention of diabetes mellitus or at least prevention of its complications by optimising glucose metabolism should be given highest priority in times of limited resources for healthcare. SMBG is perhaps a valuable tool to achieve this target.

Inclusive double-pomeron exchange at the fermilab tevatron p p collider

We report results from a study of events with a double-Pomeron exchange topology produced in p p collisions at sqrt[s]=1800 GeV. The events are characterized by a leading antiproton and a large rapidity gap on the outgoing proton side. We find that the differential production cross section agrees in shape with predictions based on Regge theory and factorization, and that the ratio of double-Pomeron exchange to single diffractive production rates is relatively unsuppressed as compared to the O(10) suppression factor previously measured in single diffractive production.

Search for Kaluza-Klein graviton emission in pp collisions at square root[s] = 1.8 TeV using the missing energy signature

We report on a search for direct Kaluza-Klein graviton production in a data sample of 84 pb(-1) of ppmacr; collisions at sqrt[s]=1.8 TeV, recorded by the Collider Detector at Fermilab. We investigate the final state of large missing transverse energy and one or two high energy jets. We compare the data with the predictions from a (3+1+n)-dimensional Kaluza-Klein scenario in which gravity becomes strong at the TeV scale. At 95% confidence level (C.L.) for n=2, 4, and 6 we exclude an effective Planck scale below 1.0, 0.77, and 0.71 TeV, respectively.

Search for pair production of scalar top quarks in R-parity violating decay modes in pp collisions at square root of s=1.8 TeV

We present the results of a search for pair production of scalar top quarks (t(1)) in an R-parity violating supersymmetry scenario in 106 pb(-1) of pp collisions at square root of s=1.8 TeV collected by the Collider Detector at Fermilab. In this mode each t(1) decays into a tau lepton and a b quark. We search for events with two tau's, one decaying leptonically (e or mu) and one decaying hadronically, and two jets. No candidate events pass our final selection criteria. We set a 95% confidence level lower limit on the t(1) mass at 122 GeV/c(2) for Br(t(1)-->tau b)=1.

Search for lepton flavor violating decays of a heavy neutral particle in p(-)p collisions at sqrt[s]=1.8 TeV

We report on a search for a high mass, narrow width particle that decays directly to emu, etau, or microtau. We use approximately 110 pb(-1) of data collected with the Collider Detector at Fermilab from 1992 to 1995. No evidence of lepton flavor violating decays is found. Limits are set on the production and decay of sneutrinos with R-parity violating interactions.

Central pseudorapidity gaps in events with a leading antiproton at the fermilab tevatron pp collider

We report a measurement of the fraction of events with a large pseudorapidity gap deltaeta within the pseudorapidity region available to the proton dissociation products X in p+p-->p+X. For a final state p of fractional momentum loss xi(p) and 4-momentum transfer squared t(p) within 0.06<xi(p)<0.09 and |t(p)|<1.0 [0.2] GeV2 at sqrt[s]=1800 [630] GeV, the fraction of events with deltaeta>3 is found to be 0.246+/-0.001 (stat)+/-0.042 (syst) [0.184+/-0.001 (stat)+/-0.043 (syst)]. Our results are compared with gap fractions measured in minimum bias pp collisions and with theoretical expectations.

Search for the supersymmetric partner of the top quark in dilepton events from pp collisions at square root of s=1.8 TeV

We have searched for pair production of the supersymmetric partner of the top quark (stop) in 107 pb(-1) of pp collisions at square root of s=1.8 TeV collected by the Collider Detector at Fermilab (CDF). Each stop is assumed to decay into a lepton, bottom quark, and supersymmetric neutrino. Such a scenario would give rise to events with two leptons, two hadronic jets, and a substantial imbalance of transverse energy. No evidence of such a stop signal has been found. We exclude stop masses in the region (80</=m(t)</=135 GeV/c(2)) in the mass plane of stop versus sneutrino.

Search for associated production of Upsilon and vector boson in pp collisions at sqrt[s]=1.8 TeV

We present a search for associated production of the Upsilon(1S) and a vector boson in 83 pb(-1) of ppmacr; collisions at sqrt[s]=1.8 TeV collected by the CDF experiment in 1994-1995. We find no evidence of the searched signal in the data, and set upper limits to the production cross sections.

Search for long-lived charged massive particles in pp collisions at square root s = 1.8 TeV

We report a search for the production of long-lived charged massive particles in a data sample of 90 pb(-1) of square root[s]=1.8 TeV pp collisions recorded by the Collider Detector at Fermilab. The search uses the muonlike penetration and anomalously high ionization energy loss signature expected for such a particle to discriminate it from backgrounds. The data are found to agree with background expectations, and cross section limits of O(1) pb are derived using two reference models, a stable quark and a stable scalar lepton.

Search for a W' boson decaying to a top and bottom quark pair in 1.8 TeV pp collisions

We report the results of a search for a W' boson produced in pp; collisions at a center-of-mass energy of 1.8 TeV using a 106 pb(-1) data sample recorded by the Collider Detector at Fermilab. We observe no significant excess of events above background for a W' boson decaying to a top and bottom quark pair. In a model where this boson would mediate interactions involving a massive right-handed neutrino (nu(R)) and have standard model strength couplings, we use these data to exclude a W' boson with mass between 225 and 536 GeV/c(2) at 95% confidence level for M(W')>>M(nu(R)) and between 225 and 566 GeV/c(2) at 95% confidence level for M(W')<M(nu(R)).

Limits on extra dimensions and new particle production in the exclusive photon and missing energy signature in pp collisions at square root [s]=1.8 TeV

The exclusive gammaE(T) signal has a small standard model cross section and is thus a channel sensitive to new physics. This signature is predicted by models with a superlight gravitino or with large extra spatial dimensions. We search for such signals at the Collider Detector at Fermilab, using 87 pb(-1) of data at square root [s]=1.8 TeV, and extract 95% C.L. limits on these processes. A limit of 221 GeV is set on the scale |F|(1/2) in supersymmetric models. For 4, 6, and 8 extra dimensions, model-dependent limits on the fundamental mass scale M(D) of 0.55, 0.58, and 0.60 TeV, respectively, are found. We also specify a "pseudo-model-independent" method of comparing the results to theoretical predictions.