Effect of interlamellar interactions on shear induced multilamellar vesicle formation

Shear-induced multilamellar vesicle (MLV) formation has been studied by coupling the small-angle neutron scattering (SANS) technique with neutron spin echo (NSE) spectroscopy. A 10% mass fraction of the nonionic surfactant pentaethylene glycol dodecyl ether (C₁₂E₅) in water was selected as a model system for studying weak inter-lamellar interactions. These interactions are controlled either by adding an anionic surfactant, sodium dodecyl sulfate, or an antagonistic salt, rubidium tetraphenylborate. Increasing the charge density in the bilayer induces an enhanced ordering of the lamellar structure. The charge density dependence of the membrane bending modulus was determined by NSE and showed an increasing trend with charge. This behavior is well explained by a classical theoretical model. By considering the Caillé parameters calculated from the SANS data, the layer compressibility modulus B¯ is estimated and the nature of the dominant inter-lamellar interaction is determined. Shear flow induces MLV formation around a shear rate of 10 s^-1, when a small amount of charge is included in the membrane. The flow-induced layer undulations are in-phase between neighboring layers when the inter-lamellar interaction is sufficiently strong. Under these conditions, MLV formation can occur without significantly changing the inter-lamellar spacing. On the other hand, in the case of weak inter-lamellar interactions, the flow-induced undulations are not in-phase, and greater steric repulsion leads to an increase in the inter-lamellar spacing with shear rate. In this case, MLV formation occurs as the amplitude of the undulations gets larger and the steric interaction leads to in-phase undulations between neighboring membranes.

Geographical variation in the skeletal morphology of red jungle fowl

1. The skulls and postcranial skeletons of the red jungle fowl (Gallus gallus) were compared osteometrically between the populations from North and South Vietnam, North and Central Laos and Southeast Bangladesh. The populations include the three subspecies of G. g. spadiceus, G. g. gallus and G. g. murghi and were sampled to reveal the geographical morphological variations among populations in G. gallus. 2. The morphometric characteristics of subspecies murghi could be clearly distinguished from those of the other subspecies using a canonical discriminant analysis. However, the size and shape of the skull of the gallus population from South Vietnam were not statistically different from that of the subspecies spadiceus from North Laos. The canonical discriminant scores also clearly indicated that there were morphological similarities in the skulls of the populations from North Laos and South Vietnam. 3. From the results, therefore, it is concluded that red jungle fowls do not exhibit high levels of osteometric variation between geographical localities at least within the Indochinese Peninsula. 4. This contrasts with previous studies which have described these subspecies as having various external morphological differences and have argued that zoogeographical barriers exist between the north and south areas of the Indochinese Peninsula.

C-type lectin-like receptor 2 promotes hematogenous tumor metastasis and prothrombotic state in tumor-bearing mice

Essentials The role of C-type lectin-like receptor-2 (CLEC-2) in cancer progression is unclear. CLEC-2-depleted mouse model is generated by using a rat anti-mouse CLEC-2 monoclonal antibody. CLEC-2 depletion inhibits hematogenous tumor metastasis of podoplanin-expressing B16F10 cells. CLEC-2 depletion prolongs cancer survival by suppressing thrombosis and inflammation.

SUMMARY

Background C-type lectin-like receptor 2 (CLEC-2) is a platelet activation receptor of sialoglycoprotein podoplanin, which is expressed on the surface of certain types of tumor cells. CLEC-2-podoplanin interactions facilitate hematogenous tumor metastasis. However, direct evidence of the role of CLEC-2 in hematogenous metastasis and cancer progression is lacking. Objective and methods We generated immunological CLEC-2-depleted mice by using anti-mouse CLEC-2 monoclonal antibody 2A2B10 and investigated whether CLEC-2 promoted hematogenous tumor metastasis and tumor growth and exacerbated the prognosis of mice bearing podoplanin-expressing B16F10 melanoma cells. Results Our results showed that hematogenous metastasis was significantly inhibited in CLEC-2-depleted mice. B16F10 cells co-cultured with wild-type platelets, but not with CLEC-2-deficient platelets, showed increased proliferation. However, B16F10 cell proliferation was not inhibited in CLEC-2-depleted mice. Histological analysis showed that thrombus formation in tumor vessels was significantly inhibited and functional vessel density was significantly increased in CLEC-2-depleted mice. These data suggest that CLEC-2 deficiency may inhibit thrombus formation in tumor vessels and increase the density of functional vessels, thus improving oxygen and nutrient supply to tumors, indirectly promoting tumor proliferation. Furthermore, the overall survival of CLEC-2-depleted mice was significantly prolonged, which may be due to the suppression of thrombus formation in the lungs and subsequent inhibition of systemic inflammation and cachexia. Conclusions These data provide a rationale for the targeted inhibition of CLEC-2 as a new strategy for preventing hematogenous tumor metastasis and for inhibiting cancer-related thromboembolism.

Quantitative Assessment of Circumferential Enhancement along the Wall of Cerebral Aneurysms Using MR Imaging

BACKGROUND AND PURPOSE

The incidence of wall enhancement of cerebral aneurysms on vessel wall MR imaging has been described as higher in ruptured intracranial aneurysms than in unruptured intracranial aneurysms, but the difference in the degree of enhancement between ruptured and unruptured aneurysms is unknown. We compared the degree of enhancement between ruptured and unruptured intracranial aneurysms by using quantitative MR imaging measures.

MATERIALS AND METHODS

We performed quantitative analyses of circumferential enhancement along the wall of cerebral aneurysms in 28 ruptured and 76 unruptured consecutive cases by using vessel wall MR imaging. A 3D-T1-weighted fast spin-echo sequence was obtained before and after contrast media injection, and the wall enhancement index was calculated. We then compared characteristics between ruptured and unruptured aneurysms.

RESULTS

The wall enhancement index was significantly higher in ruptured than in unruptured aneurysms (1.70 ± 1.06 versus 0.89 ± 0.88, respectively; P = .0001). The receiver operating characteristic curve analysis found that the most reliable cutoff value of the wall enhancement index to differentiate ruptured from unruptured aneurysms was 0.53 (sensitivity, 0.96; specificity, 0.47). The wall enhancement index remained significant in the multivariate logistic regression analysis (P < .0001).

CONCLUSIONS

Greater circumferential enhancement along the wall of cerebral aneurysms correlates with the ruptured state. A quantitative evaluation of circumferential enhancement by using vessel wall MR imaging could be useful in differentiating ruptured from unruptured intracranial aneurysms.

Influence of Etching Mode on Enamel Bond Durability of Universal Adhesive Systems

The purpose of this study was to determine the enamel bond durability of three universal adhesives in different etching modes through fatigue testing. The three universal adhesives used were Scotchbond Universal, Prime&Bond Elect universal dental adhesive, and All-Bond Universal light-cured dental adhesive. A single-step self-etch adhesive, Clearfil S³ Bond Plus was used as a control. The shear bond strength (SBS) and shear fatigue strength (SFS) to human enamel were evaluated in total-etch mode and self-etch mode. A stainless steel metal ring with an internal diameter of 2.4 mm was used to bond the resin composite to the flat-ground (4000-grit) tooth surfaces for determination of both SBS and SFS. For each enamel surface treatment, 15 specimens were prepared for SBS and 30 specimens for SFS. The staircase method for fatigue testing was then used to determine the SFS of the resin composite bonded to the enamel using 10-Hz frequencies for 50,000 cycles or until failure occurred. Scanning electron microscopy was used to observe representative debonded specimen surfaces and the resin-enamel interfaces. A two-way analysis of variance and the Tukey post hoc test were used for analysis of the SBS data, whereas a modified t-test with Bonferroni correction was used for the SFS data. All adhesives in total-etch mode showed significantly higher SBS and SFS values than those in self-etch mode. Although All-Bond Universal in self-etch mode showed a significantly lower SBS value than the other adhesives, there was no significant difference in SFS values among the adhesives in this mode. All adhesives showed higher SFS:SBS ratios in total-etch mode than in self-etch mode. With regard to the adhesive systems used in this study, universal adhesives showed higher enamel bond strengths in total-etch mode. Although the influence of different etching modes on the enamel-bonding performance of universal adhesives was found to be dependent on the adhesive material, total-etch mode effectively increased the enamel bond strength and durability, as measured by fatigue testing.

Porosity dependency of an optimized stent design for an intracranial aneurysm

BACKGROUND

Optimal design of stents for a cerebral aneurysm is desired for efficient flow reduction in the aneurysm.

OBJECTIVE

In this study, we aimed to optimize stent design at several porosities, estimate the influence of stent design on aneurysm flow, and evaluate the ability of stents to reduce flow.

METHODS

Stent models were constructed as sets of squares or rectangles in the necks of a two-dimensional (2D) and realistic aneurysm. Then, automated optimization was performed using a combination of simulated annealing and lattice Boltzmann flow simulation.

RESULTS

By simulated annealing, stents were gradually modified to reduce the average velocity in an aneurysm. As a result of optimization, stents of all porosities demonstrated an inhomogeneous distribution with dense struts in the inflow area. Flow reduction was increased compared with the initial stent. Under the condition of high porosity, flow reduction by the stent drastically increased as porosity decreased. Under low porosity, the increase of velocity reduction was moderate even as porosity decreased.

CONCLUSIONS

Optimization can enhance flow reduction by stents. However, the increase in reduction associated with decreasing porosity is moderate under lower-porosity conditions. This threshold may help in the choice of stent porosity for each specific aneurysm.

Off-pump coronary artery bypass for a heparin-allergic patient

A 46-year-old man with no history of drug allergy developed acute myocardial infarction. Coronary angiographic findings revealed triple vessel disease. Serum hepatic enzymes were elevated due to heparin administered to control infarction, and an allergic reaction developed exclusively due to heparin. To avoid heparin use, we adopted heparin-free off-pump coronary artery bypass grafting through median sternotomy. The systemic anticoagulant agent argatroban was administered to maintain active clotting time over 200 seconds. The left internal thoracic artery was anastomosed to the left anterior descending artery, the radial artery to the diagonal branch, and the right gastroepiploic artery to the right coronary artery. Patency was confirmed by postoperative coronary angiography. No complications were noted. For patients with heparin allergy, off-pump coronary artery bypass grafting is a useful maneuver, because it can be conducted using anticoagulant agents other than heparin.