Use of dynamic contrast-enhanced MRI for the early assessment of outcome of CyberKnife stereotactic radiosurgery for patients with spinal metastases

AIM

To explore the value of dynamic contrast-enhanced magnetic resonance imaging (DCE-MRI) for evaluating early outcomes of CyberKnife radiosurgery for spinal metastases.

MATERIALS AND METHODS

Patients with spinal metastases who were treated with CyberKnife radiosurgery from July 2018 to December 2020 were enrolled. Conventional MRI and DCE-MRI were performed before treatment and at 3 months after treatment. Patients showing disease progression were defined as the progressive disease (PD) group and those showing complete response, partial response, and stable disease were defined as the non-PD group. The haemodynamic parameters (volume transfer constant [Ktrans], rate constant [Kep], and extravascular space [Ve]) before and after treatment between the groups were analysed. Area under the curve (AUC) values were calculated.

RESULTS

A total of 27 patients with 39 independent spinal lesions were included. The median follow-up time was 18.6 months (6.2-36.4 months). There were 27 lesions in the non-PD group and 12 lesions in the PD group. Post-treatment Kep, ΔKtrans and ΔKep in the non-PD group (0.959/min, - 32.6% and -41.1%, respectively) were significantly lower than the corresponding values in PD group (1.429/min, 20.4% and -6%; p<0.05). Post-treatment Ve and ΔVe (0.223 and 27.8%, respectively) in the non-PD group were significantly higher than that of the PD group (0.165 and -13.5%, p<0.05). ΔKtrans showed the highest diagnostic efficiency, with an AUC of 0.821.

CONCLUSIONS

DCE-MRI parameters change significantly at an early stage after CyberKnife stereotactic radiosurgery for spinal metastases. DCE-MRI may be of value in determining the early treatment response.

[A novel frameshift NDUFV1 mutation in a child with the phenotype of optic nerve atrophy]

OBJECTIVE

To investigate the pathogenic gene in a child with optic atrophy and analyze the influence of this gene mutation on protein structure.

OBJECTIVE

We collected the clinical record of the 13-year-old girl and her relatives. The child received examinations of the visual acuity, visual field, fundus, OCT, visual-evoked potential (VEP) and the nerve system, underwent brain MRI and was followed up for 1 year. Genomic DNA was extracted from the peripheral blood of the child and her parents for next-generation sequencing of the whole exon. The pathogenic gene mutation was identified and the resultant changes in the protein structure was analyzed.

OBJECTIVE

The patient presented with impaired vision and optic nerve atrophy in both eyes with low amplitude of VEP, but did not show dystonia or pyramidal tract symptom. Brain MRI detected no leukodystrophy. Genetic analysis suggested a heterozygous c.53_54delTG mutation in exon 1 in the NDUFV1 gene of complex I, which caused a frameshift starting with the codon valine 18, thus changing the amino acid to an Alanine residue and creating a premature stop codon at position 20 of the new reading frame (p.Val18AlafsX20). A heterozygous for c.1162+4A>C: IVS8 + 4A>C in intron 8 was also found. Protein structure analysis showed the missing of important structure of NDUFV1 subunit in complex I.

OBJECTIVE

We identified a novel NDUFV1 mutation in a child with optic nerve atrophy. This finding may provide further insight into the genotype-phenotype correlations for NDUFV1 gene.

From benchtop to clinic: a translational analysis of the immune response to submicron topography and its relevance to bone healing

Proper regulation of the innate immune response to bone biomaterials after implantation is pivotal for successful bone healing. Pro-inflammatory M1 and anti-inflammatory M2 macrophages are known to have an important role in regulating the healing response to biomaterials. Materials with defined structural and topographical features have recently been found to favourably modulate the innate immune response, leading to improved healing outcomes. Calcium phosphate bone grafts with submicron-sized needle-shaped surface features have been shown to trigger a pro-healing response through upregulation of M2 polarised macrophages, leading to accelerated and enhanced bone regeneration. The present review describes the recent research on these and other materials, all the way from benchtop to the clinic, including in vitro and in vivo fundamental studies, evaluation in clinically relevant spinal fusion models and clinical validation in a case series of 77 patients with posterolateral and/or interbody fusion in the lumbar and cervical spine. This research demonstrates the feasibility of enhancing biomaterial-directed bone formation by modulating the innate immune response through topographic surface features.

Cardiometabolic index: a new tool for screening the metabolically obese normal weight phenotype

PURPOSE

People with the metabolically obese normal weight (MONW) phenotype are considered as an extremely high-risk group for unfavorable health consequences, but they are frequently undetected due to deceptive body mass index (BMI) and complex assessment. This study aimed to explore the clinical usefulness of cardiometabolic index (CMI) in identifying MONW individuals.

METHODS

This cross-sectional study involved a total of 47,683 normal-weight subjects aged ≥ 18 years. Participants underwent anthropometrics, routine biochemical tests, and questionnaires for a full evaluation of the metabolic profile. The odds ratio (OR) of CMI and MONW phenotype was determined by the Logistic regression models and the diagnostic accuracy of CMI was evaluated by the receiver operating characteristic (ROC) curve analysis.

RESULTS

The prevalence of MONW phenotype was 11.0%. After multivariate adjustment, the ORs for MONW in the highest compared with the lowest quartile of CMI was 71.20 (95% CI 55.19-91.86), and 1-SD increment of CMI brought a 54% additional risk. In ROC analysis, compared with BMI and waist circumference, CMI showed superior performance for identifying MONW individuals with an AUC of 0.853 (95% CI 0.847-0.860) in men and 0.912 (95% CI 0.906-0.918) in women, respectively. Moreover, CMI exhibited the highest diagnostic accuracy in younger age groups (aged 18-34 for men; aged 18-34 and 35-44 for women), in which AUCs surpassed 0.9 in both sexes.

CONCLUSIONS

CMI could be served as a valuable indicator to identify MONW phenotype of Chinese adults, particularly for young people.

[Impact of cardiovascular metabolic diseases on COVID-19: review of recent progress]

The high comorbidity between cardiovascular and metabolic diseases (CVMD) and coronavirus disease 2019 (COVID-19) and the consequent high mortality and the potential risk of cardiovascular damage have brought great challenges to the clinical diagnosis and treatment of the condition. The latest studies found that advanced age, immune function defects, inflammatory factor storms and oxidative stress damage all potentially contribute to the high comorbidity of the two. Direct virus invasion, myocardial oxygen supply and demand imbalance and vascular endothelial and coagulation dysfunction may be important mechanisms for cardiovascular injury in COVID-19 patients. In addition, the expression level of ACE2 (the cell membrane receptor of SARS-CoV-2) in various organs and the peripheral blood not only mediates the direct invasion and damage of the organs, but also participates in regulation of the balance of systematic inflammation and oxidative stress, thus affecting the susceptibility and outcomes of the patients. Herein we review the recent research progress in the comorbidity between COVID-19 and CVMD and explore the mechanisms of cardiovascular damage caused by SARS-CoV-2, thus to provide a theoretical basis for the clinical diagnosis and treatment of COVID-19 with underlying CVMD.

LINC01198 promotes colorectal cancer cell proliferation and inhibits apoptosis via Notch signaling pathway

OBJECTIVE

To detect the expression level of long intergenic non-protein coding RNA 1198 (LINC01198) in colorectal cancer (CRC) tissues and cells, to investigate the effect of LINC01198 on the biological function of CRC cells through in vivo and in vitro experiments, and to explore its molecular mechanism.

PATIENTS AND METHODS

Tissue samples were collected from 32 patients with CRC. Quantitative Real Time-Polymerase Chain Reaction (qRT-PCR) was utilized to detect the relative expression level of LINC01198 in CRC tissues and cells. In vitro experiments [Cell Counting Kit-8 (CCK-8) and flow cytometry] were conducted to explore the effect of interfering with the expression of LINC01198 on the proliferation, cycle and apoptosis of CRC cells. Tumorigenesis assay was undertaken in nude mice to investigate the influence of LINC01198 on the tumorigenic ability of CRC cells in vivo. Besides, Western blotting was performed to determine the changes in the downstream signaling pathway of LINC01198.

RESULTS

Among the 32 cases of tissue samples of CRC patients, 28 cases had an upregulated expression of LINC01198 compared with paracancerous tissues. The results of qRT-PCR indicated that LINC01198 expression was upregulated in CRC cells, and the interference efficiency of si-LINC01198 was measured via qRT-PCR. The results of in vitro experiments demonstrated that after interfering with the expression of LINC01198 in CRC cells, cell proliferation capacity was inhibited, cell cycle was arrested at G1/G0 phase, and the apoptosis rate was increased. The results of nude mice tumorigenesis experiments revealed that after interfering with the expression of LINC01198, the tumorigenic ability of CRC cells in vivo declined. Additionally, Western blotting assay results confirmed that after interfering with the expression of LINC01198, the expression of molecular markers in the Notch signaling pathway was inhibited.

CONCLUSIONS

The expression of LINC01198 is upregulated in the case of CRC, which promotes proliferation and inhibits apoptosis of CRC cells by regulating the Notch signaling pathway. Our findings provide a novel biomarker for the diagnosis and treatment of HCC patients and treatment strategies.

3D porous Ti6Al4V-beta-tricalcium phosphate scaffolds directly fabricated by additive manufacturing

3D Ti6Al4V-beta-tricalcium phosphate (TCP) hybrid scaffolds with interconnected porous network and controllable porosity and pore size were successfully produced by three-dimensional fiber deposition (3DF). The macrostructure of scaffolds was determined by the 3D design, whereas the micro- and submicron structure were derived from the Ti6Al4V powder sintering and the crystalline TCP powder, respectively. Ti6Al4V-TCP slurry was developed for 3DF by optimizing the TCP powder size, Ti6Al4V-to-TCP powder ratio and Ti6Al4V-TCP powder content. Moreover, the air pressure and fiber deposition rate were optimized. A maximum achievable ceramic content in the Ti6Al4V-TCP slurry that enables 3DF manufacturing was 10 wt%. The chemical analysis showed that limited contamination occurred during sintering. The compressive strength and Young's modulus of the scaffolds exhibited values between those of cancellous and cortical bone. The 3D Ti6Al4V-TCP scaffolds with 10 wt% TCP allowed deposition of a calcium phosphate layer on the surface in a simulated body fluid. Cumulative release of calcium and phosphate ions from the scaffolds was observed in a simulated physiological solution, in contrast to a cell culture medium. A pilot in vivo study, in which the scaffolds were implanted intramuscularly in dogs showed ectopic bone formation in the Ti6Al4V-TCP scaffolds with 10 wt% TCP, showing their osteoinductive potential. The porous 3D Ti6Al4V-TCP scaffolds developed here combine the mechanical properties of the metal with the bioactivity of the ceramic and are therefore likely to yield more effective strategies to control the implant-bone interface and thereby improve long-term clinical results in orthopaedics and craniomaxillofacial surgery. STATEMENT OF SIGNIFICANCE: In this work, 3D porous hybrid scaffolds made of a titanium alloy and a beta-tricalcium phosphate ceramic (Ti6Al4V-TCP) were developed using the direct additive manufacturing technique 3D fiber deposition. Upon optimization of the powders and slurry, scaffolds with up to 10 wt.% TCP with good mechanical properties and controllable porous structure at different length scales were successfully manufactured. A preliminary in vivo study in an intramuscular model demonstrated that the addition of TCP to the metal alloy improved its bioactivity. The combination of the two materials and the use of a direct additive manufacturing technique resulted in scaffolds that may lead to more effective strategies to control the implant-bone interface and thereby improve long-term clinical results in orthopaedics and craniomaxillofacial surgery.

Accurate post-mortem alignment for Focused Ion Beam and Scanning Electron Microscopy (FIB-SEM) tomography

Drifts in the three directions (X, Y, Z) during the FIB-SEM slice-and-view tomography is an important issue in 3D-FIB experiments which may induce significant inaccuracies in the subsequent volume reconstruction and further quantification of morphological volume parameters of the sample microstructure. Cross-correlation is frequently applied directly to the cross-section image series for aligning FIB sliced images. This solution is hazardous and can be flawed as it has been easily demonstrated by a dedicated test experiment. As a result, a novel aligning procedure based on the quantification of the topography of the sample surface has been developed. This new approach will be compared to the common cross-correlation methods, as well as another approach consisting in using an artificial reference marker fabricated during the FIB procedure. All these methods will then be discussed in terms of accuracy and liability.

[Cytotoxic effect of photodynamic liposome gel combined with trastuzumab on drugresistant breast cancer cells in vitro]

OBJECTIVE

To evaluate the cytotoxic effect of photodynamic therapy (PDT) combined with targeted therapy using cross-linked liposomes and gels (Ce6-PC-Tmab@A-Gel) loaded with photosensitizer Chlorin (Ce6) and the tumor-targeting drug Trastuzumab (Tmab) in drug-resistant HER2+ breast cancer cells.

OBJECTIVE

Ce6-PC-Tmab liposomes were prepared using the thin-film hydration method. The general properties, encapsulation efficiency and near-infrared responsivity of the nanoparticles were evaluated. Ce6-PC-Tmab@A-Gel with a shear response was prepared by freeze drying and stirring crosslinking, and its microstructure was observed with scanning electron microscopy (SEM) and the shear response evaluated using a rheometer. The inhibitory effect of Ce6-PC-Tmab@A-Gel in drug-resistant HER2⁺ breast cancer SK-BR-3 cells was assessed with cytotoxicity assay (MTT assay) combined with near-infrared light.

OBJECTIVE

The particle size of Ce6-PC-Tmab was 239.7±9.7 nm and the potential was -2.03±0.09 mV. The entrapment efficiency of Tmab by Ce6-PC-Tmab liposomes was (40.22± 0.73)%. The prepared Ce6-PC-Tmab@A-Gel had a good shear response with excellent drug release characteristics under nearinfrared light, and increased intensity and duration of near-infrared light exposure enhanced Tmab release from the gel. Ce6-PC-Tmab@A-Gel was stable at room temperature and in a simulated tumor microenvironment (pH 6.25). Cytotoxicity assay (MTT) showed that Ce6-PC-Tmab@A-Gel combined with near-infrared light resulted in a survival rate of (31.37±1.73)% in SKBR-3 cells, much lower than that in the control group and other treatment groups (P < 0.01); the combined treatment also had a high efficiency of ROS production, and ROS release reached (22.36 ± 0.11)% after 2 min of near-infrared light exposure.

OBJECTIVE

The prepared Ce6-PC-Tmab@A-Gel has good near-infrared light response release characteristics to ensure effective targeted therapy with Tmab. The injectable gel system potentially allows long-term local drug release in the tumor to improve the treatment efficacy against drug-resistant breast cancer.

[Expert consensus on the treatment of oral and maxillofacial space infections]

Oral and maxillofacial space infections (OMSI) are common diseases of the facial region involving fascial spaces. Recently, OMSI shows trends of multi drug-resistance, severe symptoms, and increased mortality. OMSI treatment principles need to be updated to improve the cure rate. Based on the clinical experiences of Chinese experts and with the incorporation of international counterparts' expertise, the principles of preoperative checklist, interpretation of examination results, empirical medication principles, surgical treatment principles, postoperative drainage principles, prevention strategies of wisdom teeth pericoronitis-related OMSI, blood glucose management, physiotherapy principles, Ludwig's angina treatment and perioperative care were systematically summarized and an expert consensus on the diagnosis and treatment of OMSI was reached. The consensus aims to provide criteria for the diagnosis and treatment of OMSI in China so as to improve the level of OMSI treatment.

Transcriptome analysis of sheep follicular development during prerecruitment, dominant, and mature stages after FSH superstimulation

Sheep is usually a monovular animal; superovulation technology is used to increase the number of offspring per individual and shorten generation intervals. To date, mature FSH superstimulatory treatments have been successfully used in sheep breeding, but much remains unknown about genes, pathways, and biological functions involved in follicular development. Therefore, in this study, we performed transcriptome profiling of small follicles (SFs; 2-2.5 mm), medium follicles (MFs; 3.5-4.5 mm), and large follicles (LFs; > 6 mm) in Mongolian ewes after FSH superstimulation. Furthermore, we identified differentially expressed genes and performed Kyoto Encyclopedia of Genes and Genomes pathway and Gene Ontology enrichment analyses in 3 separate pairwise comparisons. We found that ovarian steroidogenesis was significantly enriched in the SFs versus MFs analysis; the associated genes, cytochrome P450 family 19 (CYP19) and Hydroxy-delta-5-steroid dehydrogenase 3 beta- and steroid delta-isomerase 1 (HSD3B1), were significantly upregulated. Moreover, proline metabolism, glutathione metabolism, and PPAR signaling pathways were significantly enriched in the LFs versus SFs analysis; the associated genes, glutamate-cysteine ligase modifier subunit (GCLM) and cystathionine gamma-lyase (CTH), were significantly upregulated, whereas peroxisome proliferator-activated receptor gamma (PPARγ) was significantly downregulated. In summary, our study provides basic data and possible biological direction to further explore the molecular mechanism of sheep follicular development after FSH superstimulation.

Genetic variants in long non-coding RNAs UCA1 and NEAT1 were associated with the prognosis of oral squamous cell carcinoma

Oral squamous cell carcinoma (OSCC) is known for its high incidence, death rate, and relatively low 5-year survival. Long non-coding RNAs (lncRNAs) have been shown to play a significant role in cancerization and cancer progression. However, research on the association of polymorphisms in these lncRNAs with the prognosis of OSCC is lacking. Fifteen functional single-nucleotide polymorphisms (SNPs) in seven lncRNAs were selected to explore the relationship between these lncRNA SNPs and the prognosis among 209 OSCC patients. Kaplan-Meier analysis and Cox proportional hazards regression models were used to examine the associations. Further functional exploration of significant SNPs was done by eQTL analysis. Using multivariate Cox hazards regression analysis, a predictive role of NEAT1 rs3741384 GG and UCA1 rs7255437 TC+TT in a worse prognosis of OSCC was identified. In addition, a marked increased risk of death was observed with an increasing number of unfavourable genotypes (NUG). The NUG was then incorporated with clinical variables in the receiver operating characteristic curve, and the results indicated a potential role of the NUG in predicting OSCC patient risk of death (area under the curve increase from 0.616 to 0.703). In conclusion, the study findings indicate that genetic variants rs3741384 in NEAT and rs7255437 in UCA1 may influence the survival of OSCC patients.

Ultra-low-dose CT reconstructed with ASiR-V using SmartmA for pulmonary nodule detection and Lung-RADS classifications compared with low-dose CT

AIM

To evaluate the accuracy of ultra-low-dose computed tomography (ULDCT) with ASiR-V using a noise index (SmartmA) for pulmonary nodule detection and Lung CT Screening Reporting And Data System (Lung-RADS) classifications compared with low-dose CT (LDCT).

MATERIALS AND METHODS

Two-hundred and ten patients referred for lung cancer screening underwent conventional chest LDCT (0.80 ± 0.28 mSv) followed immediately by ULDCT (0.16 ± 0.03 mSv). ULDCT was scanned using 120 kV/SmartmA with a noise index of 28 HU and reconstructed with ASiR-V70%. The types and diameters of all nodules were recorded. The attenuation of pure ground-glass nodules (pGGNs) was measured on LDCT. All nodules were further classified using Lung-RADS. Sensitivities of nodule detection on ULDCT were analysed using LDCT as the reference standard. Logistic regression was used to establish a prediction model for the sensitivity of nodules.

RESULTS

LDCT revealed 362 nodules and the overall sensitivity on ULDCT was 90.1%. The sensitivity for solid nodules (SNs) of ≥1 mm diameter was 96.6% (228/236) and 100% (26/26) for SNs of ≥6 mm diameter. For pGGNs of ≥6 mm, the overall sensitivity was 93% (40/43) and 100% (29/29) for nodules with a attenuation value -700 HU or more. The agreement of Lung-RADS classification between two scans was good. On logistic regression, diameter was the only independent predictor for sensitivity of SNs (p<0.05). Diameter and attenuation value were predictors for pGGNs (p<0.05).

CONCLUSION

ULDCT with ASiR-V using SmartmA is suitable for lung-cancer screening in people with a BMI ≤35 kg/m² as it has a low radiation dose of 0.16 mSv, high sensitivity for nodule detection and good performance of Lung-RADS classifications.

Distributions of time, place, and population of novel coronavirus disease 2019 (COVID-19) from January 20 to February 10, 2020, in China

Background and objective

Since December 2019, increasing cases of novel coronavirus disease 2019 (COVID-19) are being detected worldwide. The purpose of this paper is to provide a scientific reference for the global prevention and control of COVID-19.

Methods

General demographic characteristics, epidemiological history, and clinical symptoms of COVID-19 were collected that had been reported on the websites of multiple Municipal Health Commissions in China. We herein describe distributions in time, place, and population of COVID-19.

Results

As of midnight on February 10, 2020, the number of confirmed cases of COVID-19 in China was 42,638, and the province with the largest number of confirmed cases was Hubei (31,728), followed by Guangdong (1177), Zhejiang (1117), and Henan (1105) province. The number of cases and the speed of confirmed cases in provinces other than Hubei were more moderate than those of the Hubei province. The median (interquartile range) age of 1740 patients with COVID-19 was 44 (33, 54) years, with a range of 10 months to 89 years.

Conclusions

The COVID-19 epidemic should be considered a global threat and the steps for control include early diagnosis and treatment, as well as isolation.

[Distributions of time, place, and population of novel coronavirus disease 2019 (COVID-19) from January 20 to February 10, 2020, in China]

Background and objective

Since December 2019, increasing cases of novel coronavirus disease 2019 (COVID-19) are being detected worldwide. The purpose of this paper is to provide a scientific reference for the global prevention and control of COVID-19.

Methods

General demographic characteristics, epidemiological history, and clinical symptoms of COVID-19 were collected that had been reported on the websites of multiple Municipal Health Commissions in China. We herein describe distributions in time, place, and population of COVID-19.

Results

As of midnight on February 10, 2020, the number of confirmed cases of COVID-19 in China was 42,638, and the province with the largest number of confirmed cases was Hubei (31728), followed by Guangdong (1177), Zhejiang (1117), and Henan (1105) province. The number of cases and the speed of confirmed cases in provinces other than Hubei were more moderate than those of the Hubei province. The median (interquartile range) age of patients with COVID-19 was 44 (33, 54) years, with a range of 10 months to 89 years.

Conclusions

The COVID-19 epidemic should be considered a global threat and the steps for control include early diagnosis and treatment, as well as isolation.

Skeletal, dental and facial aesthetic changes following anterior maxillary segmental distraction by tooth-borne device in patients with cleft lip and palate

Maxillary skeletal deficiency secondary to cleft lip and palate (CLP) remains a significant challenge. The aim of this study was to present the comprehensive skeletal, dental and facial aesthetic outcomes of anterior maxillary segmental distraction osteogenesis (AMSDO) for treatment of maxillary hypoplasia in patients with CLP. Twelve patients with maxillary hypoplasia treated with AMSDO by a customized tooth-borne distractor were included. Three-dimensional changes of anterior maxillary segment, upper incisor and pharyngeal space were measured by three-dimensional reconstruction derived from cone beam computed tomography (CBCT) data. Length and width of dental arch during distraction were determined in dental casts. Nasolabial angle, soft-tissue convexity and patient's subjective satisfaction were assessed to evaluate facial aesthetic improvements. Nasopharyngoscopic evaluation and speech assessment were also performed before and after distraction. All patients successfully received AMSDO without serious complications. Following AMSDO, the anterior maxillary segments moved forward 5.56±0.28mm and slightly upward 1.15±0.13mm. AMSDO significantly lengthened maxillary dental arch, generated new bone to relieve dental crowding and improved patients' facial aesthetic without worsening velopharyngeal closure and speech quality. AMSDO by tooth-borne distractor is an effective surgical alternative for the advancement in patients with cleft maxillary hypoplasia.

[Research progress in standardized dental treatments of patients receiving bisphosphonate]

Bisphosphonate (BP), a group of anti-resorptive drugs, has been widely used for the treatments of osteoporosis and metastatic bone diseases. Medication-related osteonecrosis of the jaw (MRONJ), a serious well-recognized complication of patients receiving BP, adversely affects patients' oral health and quality of life. Its clinical signs include pain, bone exposure and necrosis of the jaws. Invasive oral treatments, which may affect the repair of jaws in patients using BP, could cause the occurrence of MRONJ. Therefore, it is important to avoid the risk factors of MRONJ and to standardize the operations in order to reduce the occurrence of MRONJ in oral treatments for patients receiving BP. After reviewing the related literature, this article aims to conclude the research progress on the standardized oral treatments of patients receiving BP and to provide clinical instructions for clinicians to treat these patients.