Impact of high pressure on the progress of polymerization of DGEBA cured with different amine hardeners: dielectric and DSC studies

A novel method of dielectric data analysis to extract information on the progress of the curing reaction is proposed.

Photosynthetic Control in Chloroplasts Suspensions Frozen in Liquid Nitrogen in the Presence of Glycerol

Type A complete spinach chloroplasts (photosynthetic control ratio ≅ 5) were frozen in liquid nitrogen, in the presence or absence of 50 percent glycerol (v/v). By considering five parameters related to the non cyclic electron transfer in the light (oxidant : K-ferricyanide) it was shown that the uncoupling due to freezing and thawing was partially prevented by glycerol. However glycerol was responsible for a slight uncoupling in fresh chloroplasts. The clearest uncoupling effect of freezing, and chiefly of glycerol, concerned the inhibition of the electron flow which follows the stimulation caused by a limiting quantity of ADP (state 4).

The relative decrease of the photosynthetic control and of related parameters due to the use of this method of preservation, has to be balanced with the improved homogeneity and convenience resulting from it.

The current view on biological potency of cationically modified chitosan

Chitosan is biocompatible polymer obtained from chitin, the building component of the crustacean shells. In this paper we make an attempt to review the current state of knowledge on some biological effects of chitosan in comparison with those of cationically modified chitosan, N-(2-hydroxypropyl)-3-trimethylammonium chitosan chloride (HTCC) that was recently synthetized by us by covalent attachment of glycidyltrimethylammonium chloride (GTMAC). Biological effects of HTCC and non-modified polymer are very similar. However, HTCC shows some unique beneficial properties which have not been found in its non-modified counterpart. One such example is that HTCC has the ability to bind heparin at physiological pH. HTCC having the degree of substitution almost 63.6% is easily absorbed within 1 hour after oral administration as found in C57BL/6j mice using FITC-labeled polymer. HTCC is distributed to lung, heart, and kidneys. HTCC stimulates and enhances blood platelet aggregation and decreases erythrocyte deformability (RBC). Moreover, HTCC seems to decrease both plasma total cholesterol level and LDL-cholesterol level in apoE-knockout mice fed with a diet containing HTCC. HTCC possibly down-regulates the HMG-CoAR mRNA level after 24 hour incubation with HepG2 cells in vitro.

Enhancement of the physical stability of amorphous indomethacin by mixing it with octaacetylmaltose. inter and intra molecular studies

PURPOSE

To demonstrate a very effective and easy way of stabilization of amorphous indomethacin (IMC) by preparing binary mixtures with octaacetylmaltose (acMAL). In order to understand the origin of increased stability of amorphous system inter- and intramolecular interactions between IMC and acMAL were studied.

METHODS

The amorphous IMC, acMAL and binary mixtures (IMC-acMAL) with different weight ratios were analyzed by using Dielectric Spectroscopy (DS), Differential Scanning Calorimetry (DSC), Raman Spectroscopy, X-ray Diffraction (XRD), Infrared Spectroscopy (FTIR) and Quantitative Structure-Activity Relationship (QSAR).

RESULTS

Our studies have revealed that indomethacin mixed with acetylated saccharide forms homogeneous mixture. Interestingly, even a small amount of modified maltose prevents from recrystallization of amorphous indomethacin. FTIR measurements and QSAR calculations have shown that octaacetylmaltose significantly affects the concentration of indomethacin dimers. Moreover, with increasing the amount of acMAL in the amorphous solid dispersion molecular interactions between matrix and API become more dominant than IMC-IMC ones. Structural investigations with the use of X-ray diffraction technique have demonstrated that binary mixture of indomethacin with acMAL does not recrystallize upon storage at room temperature for more than 1.5 year. Finally, it was shown that acMAL can be used to improve solubility of IMC.

CONCLUSIONS

Acetylated derivative of maltose might be very effective agent to improve physical stability of amorphous indomethacin as well as to enhance its solubility. Intermolecular interactions between modified carbohydrate and IMC are likely to be responsible for increased stability effect in the glassy state.

Molecular dynamics of itraconazole at ambient and high pressure

Comprehensive molecular dynamics studies of vitrified and cryogrounded itraconazole (Itr) were performed at ambient and elevated pressure. DSC measurements yielded besides melting and glass transition observed during heating and cooling of both samples two further endothermic events at around T = 363 K and T = 346 K. The nature of these transitions was investigated using X-ray diffraction, broadband dielectric spectroscopy and Density Functional Theory calculations. The X-ray measurements indicated that extra ordering in itraconazole is likely to occur. Based on calculations and theory derived by Letz et al. the transition observed at T = 363 K was discussed in the context of formation of the nematic mesophase. In fact, additional FTIR measurements revealed that order parameter variation in Itr shows a typical sequence of liquid crystal phases with axially symmetric orientational order; i.e. a nematic phase in the temperature range 361.7 K to 346.5 K and a smectic A phase below 346.5. Moreover, dielectric measurements demonstrated that except for the structural relaxation process, there is also slower mode above the glass transition temperature in both vitrified and cryogrounded samples. We considered the origin of this mode taking into account DFT calculations, rod like shape of itraconazole and distribution of its dipole moment vectors. For the dielectric data collected at elevated pressure, evolution of the steepness index versus pressure was determined. Finally, the pressure coefficient of the glass transition temperature was evaluated to be equal to 190 K GPa(-1).

Mutarotation in biologically important pure L-fucose and its enantiomer

The sugar specific mutarotation reaction in biologically important L-fucose and its enantiomer in the pure, anhydrous, supercooled liquid state has been studied. Kinetics measurements in the temperature range 313-328 K at ambient pressure have been performed by means of dielectric spectroscopy, a method widely used for studying the molecular dynamics of glass-forming liquids. The kinetic curves have been obtained by tracking the equilibration process in sugar melted and quenched to the desired temperature. Thereafter, an activation energy equal to Ea = 140 kJ mol(-1) for D-fucose and Ea = 123 kJ mol(-1) for L-fucose has been derived from the Arrhenius fit of temperature dependent rate constants. It was also shown that the kinetics curves at the lowest temperatures studied have sigmoidal shape, which was connected to the high concentration of furanosidic forms.

A new way of stabilization of furosemide upon cryogenic grinding by using acylated saccharides matrices. The role of hydrogen bonds in decomposition mechanism

Recently it was reported that upon mechanical milling of pure furosemide significant chemical degradation occurs (Adrjanowicz et al. Pharm. Res.2011, 28, 3220-3236). In this paper, we present a novel way of chemical stabilization amorphous furosemide against decomposing that occur during mechanical treatment by preparing binary mixtures with acylated saccharides. To get some insight into the mechanism of chemical degradation of furosemide induced by cryomilling, experimental investigations supported by density functional theory (DFT) computations were carried out. This included detailed studies on molecular dynamics and physical properties of cryoground samples. The main thrust of our paper is that we have shown that furosemide cryomilled with acylated saccharides forms chemically and physically stable homogeneous mixtures with only one glass transition temperature, Tg. Finally, solubility measurements have demonstrated that furosemide cryomilled with acylated saccharides (glucose, maltose and sucrose) is much more soluble with respect to the crystalline form of this active pharmaceutical ingredient (API).

Impact of water on molecular dynamics of amorphous α-, β-, and γ-cyclodextrins studied by dielectric spectroscopy

Dielectric, calorimetric, and x-ray diffraction measurements were carried out on α-, β-, and γ-cyclodextrins, which are cyclic saccharides built by, respectively, six, seven, and eight glucose units connected via glycosidic linkage. Differential scanning calorimetry measurements indicated that each carbohydrate has a melting temperature located much above the temperature at which thermal decomposition begins. Moreover, calorimetric data revealed that it is possible to completely dehydrate each cyclodextrin by annealing them above 413 K. Unfortunately, it is impossible to obtain amorphous forms of cyclodextrin by simple cooling of the melt. Thus, a solid state amorphization method has been applied. X-ray diffraction studies demonstrated that by ball milling at room temperature we are able to obtain completely amorphous cyclodextrins. Finally, dielectric measurements were carried out to probe molecular dynamics in the amorphous state of cyclodextrins. It was found that there is only one relaxation process in amorphous hydrated cyclodextrins, while in dried samples two secondary relaxations are present. Moreover, we have shown that water has an enormous effect on the dynamics of both relaxation modes, i.e., with increasing content of water, the activation energy of the slow mode decreases, while that evaluated for the fast mode increases. We were not able to follow the dynamics of the structural relaxation process, because glass transition temperatures of amorphous cyclodextrins were found to lie above thermal degradation points.