Comparison of readmission and early revision rates as a quality metric in total knee arthroplasty using the Nationwide Readmission Database

Background

After release of the Comprehensive Care for Joint Replacement bundle, there has been increased emphasis on reducing readmission rates for total knee arthroplasty (TKA). The potential for a separate, clinically-relevant metric, TKA revision rates within a year following surgery, has not been fully explored. Based on this, we compared rates and payments for TKA readmission and revision procedures as metrics for improving quality and cost.

Methods

We utilized the 2013 Nationwide Readmission Database (NRD) to examine national readmission and revision rates, the reasons for revision procedures, and associated costs for elective TKA procedures. As data are not linked across years, we examined revision rates for TKA completed in the month of January by capturing revision procedures in the subsequent following 11-month period to approximate a 1-year revision rate. Diagnosis and procedure codes for revision procedures were collected. Average readmission and revision procedure costs were then calculated, and the cost distributed across the entire TKA population.

Results

We identified 20,851 patients having TKA surgery. The mean unadjusted 30- and 90-day TKA readmission rates were 3.4% and 5.8%, respectively. In contrast, the mean unadjusted 3-month and approximate 1-year reoperation rates were 1.0% and 1.6%, respectively. The most common cause for revision was periprosthetic joint infection, which accounting for 62% of all reported revision procedures. The mean payment for 90-day readmission was roughly half ($10,589±$11,084) of the mean inpatient payment for single reoperation procedure at 90 days ($20,222±$17,799). Importantly, nearly half (46%) of all 90-day readmissions were associated with a reoperation event within the first year.

Conclusions

Readmission following TKA is associated with a 1-year reoperation in approximately half of patients. These reoperations represent a significant patient burden and have a higher per episode cost. Early reoperation may represent a more clinically relevant target for quality improvement and cost containment.

Artificial Intelligence and Orthopaedics: An Introduction for Clinicians

➤Artificial intelligence (AI) provides machines with the ability to perform tasks using algorithms governed by pattern recognition and self-correction on large amounts of data to narrow options in order to avoid errors. ➤The 4 things necessary for AI in medicine include big data sets, powerful computers, cloud computing, and open source algorithmic development. ➤The use of AI in health care continues to expand, and its impact on orthopaedic surgery can already be found in diverse areas such as image recognition, risk prediction, patient-specific payment models, and clinical decision-making. ➤Just as the business of medicine was once considered outside the domain of the orthopaedic surgeon, emerging technologies such as AI warrant ownership, leverage, and application by the orthopaedic surgeon to improve the care that we provide to the patients we serve. ➤AI could provide solutions to factors contributing to physician burnout and medical mistakes. However, challenges regarding the ethical deployment, regulation, and the clinical superiority of AI over traditional statistics and decision-making remain to be resolved.

Inaugural Readmission Penalties for Total Hip and Total Knee Arthroplasty Procedures Under the Hospital Readmissions Reduction Program

IMPORTANCE

The Hospital Readmissions Reduction Program (HRRP) is a Centers for Medicare and Medicaid Services policy that levies hospital reimbursement penalties based on excess readmissions of patients with 4 medical conditions and 3 surgical procedures. A greater understanding of factors associated with the 3 surgical reimbursement penalties is needed for clinicians in surgical practice.

OBJECTIVE

To investigate the first year of HRRP readmission penalties applied to 2 surgical procedures-elective total hip arthroplasty (THA) and total knee arthroplasty (TKA)-in the context of hospital and patient characteristics.

DESIGN, SETTING, AND PARTICIPANTS

Fiscal year 2015 HRRP penalization data from Hospital Compare were linked with the American Hospital Association Annual Survey and with the Healthcare Cost and Utilization Project State Inpatient Database for hospitals in the state of Florida. By using a case-control framework, those hospitals were separated based on HRRP penalty severity, as measured with the HRRP THA and TKA excess readmission ratio, and compared according to orthopedic volume as well as hospital-level and patient-level characteristics. The first year of HRRP readmission penalties applied to surgery in Florida Medicare subsection (d) hospitals was examined, identifying 60 663 Medicare patients who underwent elective THA or TKA in 143 Florida hospitals. The data analysis was conducted from February 2016 to January 2017.

EXPOSURES

Annual hospital THA and TKA volume, other hospital-level characteristics, and patient factors used in HRRP risk adjustment.

MAIN OUTCOMES AND MEASURES

The HRRP penalties with HRRP excess readmission ratios were measured, and their association with annual THA and TKA volume, a common measure of surgical quality, was evaluated. The HRRP penalties for surgical care according to hospital and readmitted patient characteristics were then examined.

RESULTS

Among 143 Florida hospitals, 2991 of 60 663 Medicare patients (4.9%) who underwent THA or TKA were readmitted within 30 days. Annual hospital arthroplasty volume seemed to follow an inverse association with both unadjusted readmission rates (r = -0.16, P = .06) and HRRP risk-adjusted readmission penalties (r = -0.12, P = .14), but these associations were not statistically significant. Other hospital characteristics and readmitted patient characteristics were similar across HRRP orthopedic penalty severity.

CONCLUSIONS AND RELEVANCE

This study's findings suggest that higher-volume hospitals had less severe, but not significantly different, rates of readmission and HRRP penalties, without systematic differences across readmitted patients.

Do Culture Negative Periprosthetic Joint Infections Remain Culture Negative?

BACKGROUND

Diagnosis and treatment of culture negative total knee arthroplasty (TKA) periprosthetic joint infection (PJI) is challenging. There is debate over whether culture negative PJI confers increased risk of failure and which organisms are responsible. It is also unclear as to what factors predict conversion from culture negative to culture positivity. To address these issues, we performed an observational study to detect factors associated with transition from culture negative to culture positive TKA PJI in those patients that failed irrigation and debridement (I&D), determine the incidence of this transition, and identify those organisms that were associated with treatment failure.

METHODS

A multicenter observational cohort study was performed on patients with TKA PJI as defined by Musculoskeletal Infection Society criteria without cultured organisms and treated with I&D. Primary outcome was failure defined as any subsequent surgical procedure. Secondary outcome included cultured organism within 2 years of initial I&D.

RESULTS

Two hundred sixteen TKA I&D procedures were performed for PJI, and 36 met inclusion criteria. The observed treatment failure rate for culture negative PJI treated with I&D was 41.67%. Of those culture negative I&Ds that failed, 53.33% became culture positive after failure. Of those that converted to culture positive, 62.5% were Staphylococcus species. The odds ratio associated with becoming culture positive following culture negative treatment failure in the setting of antibiotic administration prior to the initial I&D procedure was 0.69 (95% confidence interval 0.14-3.47, P = .65).

CONCLUSION

Many cases of culture negative TKA PJI treated with I&D eventually fail and become culture positive. Staphylococci are common organisms identified after culture negative PJI.

Diagnosis and Management of Adverse Reactions to Metal Debris

Modern total hip arthroplasty implants have incorporated modularity into their designs, providing the benefits of intraoperative flexibility and the ability to exchange the femoral heads in the future if necessary. However, this feature has unfortunately predisposed patients to the effects of corrosion, potentially resulting in adverse local tissue reactions (ALTR) and even systemic effects. A thorough understanding of the science of corrosion is important for the treating surgeon so that they can understand the underlying pathology, quickly diagnose the condition of ALTR, and risk stratify their patients to determine the best method of treatment. Revision surgery is not always necessary in cases of trunnionosis or ALTR, but the results of revision surgery are generally favorable.

Implant orientation accuracy of a hand-held robotic partial knee replacement system over conventional technique in a cadaveric test

Unicondylar Knee Arthroplasty (UKA) is a minimally-invasive surgical procedure for treating isolated compartmental knee osteoarthritis. Accurate implant placement is crucial for a successful UKA procedure. Previous work has shown the improvement in UKA by using robotic systems. Here, we present the implant alignment accuracy of a hand-held robotic UKA system compared with a conventional manual UKA system for 12 cadaver specimens. Two surgeons carried out equal number of medial UKAs with robotic UKA on one knee and the manual UKA on the other knee. Preoperative and postoperative computed tomography (CT) scans were obtained for each cadaveric model. The final implant positions were identified in the postoperative CT scan. The implant orientations were compared with the planned implant positions to obtain femoral and tibial implant alignment errors. Our results show that the femoral flexion, varus, and rotation root mean square errors for the robotic and conventional approach were 1.23°, 2.81°, 1.62° and 7.52°, 6.25°, 5.0°, respectively. The tibial slope and varus errors for the robotic and conventional approaches were 2.41°, 2.96° and 4.06°, 1.8°, respectively. We did not find any statistical significant difference (p = .05) in the performance of the two surgeons. We conclude that the hand-held robotic UKA system offers significant improvement in the final implant placement.

Trunnion Corrosion in Total Hip Arthroplasty-Basic Concepts

There has been increased interest in the role of corrosion in early implant failures and adverse local tissue reaction in total hip arthroplasty. We review the relationship between the different types of corrosion in orthopaedic surgery including uniform, pitting, crevice, and fretting or mechanically assisted crevice corrosion (MACC). Passive layer dynamics serves a critical role in each of these processes. The femoral head-neck trunnion creates an optimal environment for corrosion to occur because of the limited fluid diffusion, acidic environment, and increased bending moment.

Large variations in clinical antibiotic activity against Staphylococcus aureus biofilms of periprosthetic joint infection isolates

Staphylococcus aureus biofilms have a high tolerance to antibiotics, making the treatment of periprosthetic joint infection (PJI) challenging. From a clinical perspective, bacteria from surgical specimens are cultured in a planktonic state to determine antibiotic sensitivity. However, S. aureus exists primarily as established biofilms in PJI. To address this dichotomy, we developed a prospective registry of total knee and hip arthroplasty PJI S. aureus isolates to quantify the activity of clinically important antibiotics against isolates grown as biofilms. S. aureus planktonic minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) were assessed using clinical laboratory standard index assays for 10 antibiotics (cefazolin, clindamycin, vancomycin, rifampin, linezolid, nafcillin, gentamicin, trimethoprim/sulfamethoxazole, doxycycline, and daptomycin). Mature biofilms of each strain were grown in vitro, after which biofilm MIC (MBIC) and biofilm MBC (MBBC) were determined. Overall, isolates grown as biofilms displayed larger variations in antibiotic MICs as compared to planktonic MIC values. Only rifampin, doxycycline, and daptomycin had measurable biofilm MIC values across all S. aureus isolates tested. Biofilm MBC observations complemented biofilm MIC observations; rifampin, doxycycline, and daptomycin were the only antibiotics with measurable biofilm MBC values. 90% of S. aureus biofilms could be killed by rifampin, 50% by doxycycline, and only 15% by daptomycin. Biofilm formation increased bacterial antibiotic tolerance nonspecifically across all antibiotics, in both MSSA and MRSA samples. Rifampin and doxycycline were the most effective antibiotics at killing established S. aureus biofilms. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 37:1604-1609, 2019.

Additive Manufacturing in Total Joint Arthroplasty

Additive manufacturing (AM) has demonstrated the potential to revolutionize manufacturing for various applications across the medical, aerospace, automobile, and energy sectors. It is a layer-by-layer manufacturing process in which the computer-aided design model is sliced into layers and each layer is deposited successively to realize the final product. This article provides a general overview of AM and discusses current state-of-the-art AM methodologies as they apply to total joint arthroplasty. Specifically, details on their applications and current challenges are summarized to provide orthopedic surgeons with a basic understanding of current and potential applications of AM in total joint arthroplasty.

Role of Post-Acute Care on Hospital Readmission After High-Risk Surgery

BACKGROUND

Payment models, including the Hospital Readmissions Reduction Program and bundled payments, place pressures on hospitals to limit readmissions. Against this backdrop, we sought to investigate the association of post-acute care after major surgery and readmission rates.

METHODS

We identified patients undergoing high-risk surgery (abdominal aortic aneurysm repair, coronary bypass grafting, aortic valve replacement, carotid endarterectomy, esophagectomy, pancreatectomy, lung resection, and cystectomy) from 2005 to 2010 using the Healthcare Cost and Utilization Project's State Inpatient Database. The primary outcome was readmission rates after major surgery. Secondary outcome was readmission length of stay.

RESULTS

We identified 135,523 patients of whom 56,720 (42%) received post-acute care. Patients receiving post-acute care had higher readmission rates than those who were discharged home (16% versus 10%, respectively; P < 0.001). The risk-adjusted readmission length of stay was greatest for patients who received care from a skilled nursing facility, followed by those who received home care, and lowest for those who did not receive post-acute care (7.1 versus 5.4 versus 4.8 d, respectively; P < 0.001).

CONCLUSIONS

The use of post-acute care was associated with higher readmission rates and higher readmission lengths of stay. Improving the support of patients in post-acute care settings may help reduce readmissions and readmission intensity.

Predictors and Cost of Readmission in Total Knee Arthroplasty

BACKGROUND

The Comprehensive Care for Joint Replacement bundle was created to decrease total knee arthroplasty (TKA) cost. To help accomplish this, there is a focus on reducing TKA readmissions. However, there is a lack of national representative sample of all-payer hospital admissions to direct strategy, identify risk factors for readmission, and understand actual readmission cost.

METHODS

We used the Nationwide Readmission Database to examine national readmission rates, predictors of readmission, and associated readmission costs for elective TKA procedures. We fit a multivariable logistic regression model to examine factors associated with readmission. Then, we determined mean readmission costs and calculated the readmission cost when distributed across the entire TKA population.

RESULTS

We identified 224,465 patients having TKA across all states participating in the Nationwide Readmission Database. The mean unadjusted 30-day TKA readmission rate was 4%. The greatest predictors of readmission were congestive heart failure (odds ratio [OR] 2.51, 95% confidence interval [CI] 2.62-2.80), renal disease (OR 2.19, 95% CI 2.03-2.37), and length of stay greater than 4 days (OR 2.4, 95% CI 2.25-2.61). The overall median cost for each readmission was $6753 ± 175. Extrapolating the readmission cost for the entire TKA population resulted in the readmission cost being 2% of the overall 30-day procedure cost.

CONCLUSIONS

A major focus of the Comprehensive Care for Joint Replacement bundle is improving cost and quality by limiting readmission rates. TKA readmissions are low and comprise a small percentage of total TKA cost, suggesting that they may not be the optimal measure of quality care or a significant driver of overall cost.

A Multicenter Study of Irrigation and Debridement in Total Knee Arthroplasty Periprosthetic Joint Infection: Treatment Failure Is High

BACKGROUND

In total knee arthroplasty (TKA) periprosthetic joint infection (PJI), irrigation and debridement (I&D) with component retention is a treatment option with a wide variation in reported failure rates. The purpose of this study was to determine failure rates, outcomes, and factors that predict failure in I&D for TKA PJI.

METHODS

A multicenter observational study of patients with a TKA PJI and subsequently undergoing an I&D with retention of components was conducted. The primary outcome was failure rate of I&D, where failure was defined as any subsequent surgical procedures.

RESULTS

Two hundred sixteen cases of I&D with retention of components performed on 206 patients met inclusion criteria. The estimated long-term failure rate at 4 years was 57.4%. Time-to-event analyses revealed that the median survival time was 14.32 months. Five-year mortality was 19.9%. Multivariable modeling revealed that time symptomatic and organism were independent predictors of I&D failure. Culture-negative status had a higher hazard for failure than culture-positive patients. When primary organism and time symptomatic were selected to produce an optimized scenario for an I&D, the estimated failure rate was 39.6%.

CONCLUSION

I&D with retention of components has a high failure rate, and there is a high incidence of more complex procedures after this option is chosen. The patient comorbidities we investigated did not predict I&D success. Our results suggest that I&D has a limited ability to control infection in TKA and should be used selectively under optimum conditions.

Viable bacteria persist on antibiotic spacers following two-stage revision for periprosthetic joint infection

Treatment in periprosthetic joint infection (PJI) remains challenging. The failure rate of two-stage revision and irrigation and debridement with component retention in PJI suggests that biofilm cells have a high tolerance to antibiotic chemotherapy. Previous work has demonstrated that biofilm cells have high antibiotic tolerance in vitro, but there is little clinical evidence to support these observations. The aim of this study was to determine if retrieved antibiotic spacers from two-stage revision total knee arthroplasty for PJI have evidence of remaining viable bacteria. Antibiotic poly (methyl methacrylate) (PMMA) spacers from two-stage revision total knee arthroplasty for PJI were prospectively collected and analyzed for bacterial 16s rRNA using polymerase chain reaction (PCR), reverse transcription (RT)-PCR, quantitative RT-PCR (qRT-PCR), and single genome analysis (SGA). PCR and RT-PCR identified bacterial species on 53.8% (7/13) of these samples. When initial culture negative cases are excluded, 68% (6/9) samples were identified with bacterial species. A more rigorous qRT-PCR analysis showed a strong positive signal for bacterial contamination in 30.7% (4/13) of cases. These patients did not show any clinical evidence of PJI recurrence after 15 months of follow-up. Because the half-life of bacterial rRNA is approximately a few days, the identification of bacteria rRNA on antibiotic PMMA spacers suggests that viable bacteria were present after conclusion of antibiotic therapy. This study provides evidence for the high tolerance of biofilm cells to antibiotics in vivo and the important role of bacterial persisters in PJI. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:452-458, 2018.

Elimination of Antibiotic Resistant Surgical Implant Biofilms Using an Engineered Cationic Amphipathic Peptide WLBU2

Antibiotics are unable to remove biofilms from surgical implants. This high antibiotic tolerance is related to bacterial persisters, a sub-population of bacteria phenotypically tolerant to antibiotics secondary to a reduced metabolic state. WLBU2 is an engineered cationic amphipathic peptide designed to maximize antimicrobial activity with minimal mammalian cell toxicity. The objective of this study was to test the ability of WLBU2 to remove Staphylococcus aureus surgical implant biofilms. WLBU2 effectively treated S. aureus biofilms formed by a variety of clinical MSSA and MRSA strains and created culture-negative implants in the in vitro biofilm model. Blocking bacterial metabolism by inhibiting oxidative phosphorylation did not affect WLBU2 killing compared to decreased killing by cefazolin. In the surgical implant infection animal model, WLBU2 decreased biofilm mass as compared to control, untreated samples. WLBU2 could rapidly eliminate implants in vitro and had sufficient efficacy in vivo with minimal systemic toxicity.

Predicting early symptomatic osteoarthritis in the human knee using machine learning classification of magnetic resonance images from the osteoarthritis initiative

The purpose of this study is to evaluate the ability of a machine learning algorithm to classify in vivo magnetic resonance images (MRI) of human articular cartilage for development of osteoarthritis (OA). Sixty-eight subjects were selected from the osteoarthritis initiative (OAI) control and incidence cohorts. Progression to clinical OA was defined by the development of symptoms as quantified by the Western Ontario and McMaster Universities Arthritis (WOMAC) questionnaire 3 years after baseline evaluation. Multi-slice T2 -weighted knee images, obtained through the OAI, of these subjects were registered using a nonlinear image registration algorithm. T2 maps of cartilage from the central weight bearing slices of the medial femoral condyle were derived from the registered images using the multiple available echo times and were classified for "progression to symptomatic OA" using the machine learning tool, weighted neighbor distance using compound hierarchy of algorithms representing morphology (WND-CHRM). WND-CHRM classified the isolated T2 maps for the progression to symptomatic OA with 75% accuracy.

CLINICAL SIGNIFICANCE

Machine learning algorithms applied to T2 maps have the potential to provide important prognostic information for the development of OA. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:2243-2250, 2017.

Multirate Kalman Filter Rejects Impulse Noise in Frequency-Domain-Multiplexed Tracker Measurements

Frequency domain multiplexing (FDM) is a useful for making multiple measurements simultaneously, such as in optical and electromagnetic position trackers. Much interference is periodic (e.g., AC power harmonics), and is rejected well by FDM, but impulse disturbances are also common. Impulses corrupt the entire spectrum for a short period, and are better rejected in the time domain. Nonlinear blanking is a simple way to suppress impulses, but cannot be easily realized when the required dynamic range is large, and problematic noise may be far smaller than the signal. The described multi-rate Kalman filter upsamples the prediction to the input rate so that impulse departures from the predicted signal are easily detected and blanked out. Also, noise levels in unused adjacent channels are used to estimate measurement noise so that the Kalman filter adapts more slowly when noise is high, keeping output noise roughly constant even in the presence of longer noise bursts.

Trunnion Failure of the Recalled Low Friction Ion Treatment Cobalt Chromium Alloy Femoral Head

BACKGROUND

Gross trunnion failure (GTF) is a rare complication in total hip arthroplasty (THA) reported across a range of manufacturers. Specific lots of the Stryker low friction ion treatment (LFIT) anatomic cobalt chromium alloy (CoCr) V40 femoral head were recalled in August 2016. In part, the recall was based out of concerns for disassociation of the femoral head from the stem and GTF.

METHODS

We report on 28 patients (30 implants) with either GTF (n = 18) or head-neck taper corrosion (n = 12) of the LFIT CoCr femoral head and the Accolade titanium-molybdenum-zirconium-iron alloy femoral stems. All these cases were associated with adverse local tissue reactions requiring revision of the THA.

RESULTS

In our series, a conservative estimate of the incidence of failure was 4.7% (n = 636 total implanted) at 8.0 ± 1.4 years from the index procedure. Failures were associated with a high-offset 127° femoral stem neck angle and increased neck lengths; 43.3% (13 of 30) of the observed failures included implant sizes outside the voluntary recall (27.8% [5 of 18] of the GTF and 75.0% [8 of 12] of the taper corrosion cases). Serum cobalt and chromium levels were elevated (cobalt: 8.4 ± 7.0 μg/mL; chromium: 3.4 ± 3.3 μ/L; cobalt/chromium ratio: 3.7). The metal artifact reduction sequence magnetic resonance imaging demonstrated large cystic fluid collections typical with adverse local tissue reactions. During revision, a pseudotumor was observed in all cases. Pathology suggested a chronic inflammatory response. Impending GTF could be diagnosed based on aspiration of black synovial fluid and an oblique femoral head as compared with the neck taper on radiographs.

CONCLUSION

In our series of the recalled LFIT CoCr femoral head, the risk of impending GTF or head-neck taper corrosion should be considered as a potential diagnosis in a painful LFIT femoral head and Accolade titanium-molybdenum-zirconium-iron alloy THA with unknown etiology. Almost half of the failures we observed included sizes outside of the voluntary recall.

Robotic Total Knee Arthroplasty: Surgical Assistant for a Customized Normal Kinematic Knee

Although current total knee arthroplasty (TKA) is considered a highly successful surgical procedure, patients undergoing TKA can still experience substantial functional impairment and increased revision rates as compared with those undergoing total hip arthroplasty. Robotic-assisted surgery has been available clinically for almost 15 years and was developed, in part, to address these concerns. Robotic-assisted surgery aims to improve TKA by enhancing the surgeon's ability to optimize soft tissue balancing, reproduce alignment, and restore normal knee kinematics. Current systems include a robotic arm with a variety of different navigation systems with active, semi-active, or passive control. Semi-active systems have become the dominant strategy, providing a haptic window through which the surgeon consistently prepares a TKA based on preoperative planning. A review of previous designs and clinical studies demonstrates that these robotic systems decrease variability and increase precision, primarily with the mechanical axis and restoration of the joint line. Future design objectives include precise planning and consistent intraoperative execution. Preoperative planning, intraoperative sensors, augmenting surgical instrumentation, and biomimetic surfaces will be used to re-create the 4-bar linkage system in the knee. Implants will be placed so that the knee functions with a medial pivot, lateral rollback, screw home mechanism, and patellar femoral tracking. Soft tissue balancing will become more than equalizing the flexion and extension gaps and will match the kinematics to a normal knee. Together, coupled with advanced knee designs, they may be the key to a patient stating, "My knee feels like my natural knee." [Orthopedics. 2016; 39(5):e822-e827.].

Metal Ion Levels Are Not Correlated With Histopathology of Adverse Local Tissue Reactions in Taper Corrosion of Total Hip Arthroplasty

BACKGROUND

The underlying biological mechanism in the formation of adverse local tissue reaction in taper corrosion of total hip arthroplasty (THA) remains unknown. This study evaluated whether there was a dose-dependent relationship between metal ion levels, intraoperative tissue damage and ALVAL (aseptic lymphocyte-dominated vasculitis-associated lesion) scores in dual taper THA patients who underwent revisions for taper corrosion.

METHODS

We performed a retrospective review of 31 dual taper THA patients who underwent revision surgery from May 2013 to October 2013. Preoperative serum metal ion levels, intraoperative tissue damage grading, and ALVAL scores were reviewed. Multivariate analysis was performed to determine if an association existed between metal ion levels, intraoperative tissue damage, and ALVAL scores.

RESULTS

Findings consistent with adverse local tissue reaction were found in all cases. We noted 10 patients with low, 8 with moderate, and 13 with high ALVAL scores, respectively. For intraoperative tissue damage, we recorded 2 (grade 1), 22 (grade 2) and 7 (grade 3) cases. Preoperatively, there was preferential elevation of serum cobalt (3.8 ng/mL, 2.3-17.0) compared to serum chromium (1.0 ng/mL, 0.2-5.8). There was no correlation between preoperative metal ion levels and intraoperative tissue damage (R = -0.06, P = .74) or ALVAL scores (R = -0.04, P = .481). There was also no correlation between intraoperative tissue damage and ALVAL score (R = -0.06, P = .73).

CONCLUSION

There was no significant correlation between ALVAL scores and prerevision surgery metal ion levels or intraoperative tissue damage, suggesting that the biological mechanism of histologic morphology cannot be solely attributed to elevated metal ion levels and is likely multifactorial, reflecting a complex interplay between implant and patient factors.

Antibiotic-tolerant Staphylococcus aureus Biofilm Persists on Arthroplasty Materials

BACKGROUND

The continued presence of biofilm may be one cause of the high risk of failure observed with irrigation and débridement with component retention in acute periprosthetic joint infection (PJI). There is a poor understanding of the role of biofilm antibiotic tolerance in PJI.

QUESTIONS/PURPOSES

(1) Do increasing doses of cefazolin result in decreased viable biofilm mass on arthroplasty materials? (2) Is cefazolin resistance phenotypic or genotypic? (3) Is biofilm viability a function of biofilm depth after treatment with cefazolin? (4) Is the toxin-antitoxin system, yoeB expression, associated with antibiotic stress?

METHODS

Methicillin-sensitive Staphylococcus aureus biofilm was cultured on total knee arthroplasty (TKA) materials and exposed to increasing doses of cefazolin (control, 0.5, 1.0, 10.0, 100.0 μg/mL). Quantitative confocal microscopy and quantitative culture were used to measure viable biofilm cell density. To determine if cefazolin resistance was phenotypic or genotypic, we measured minimum inhibitory concentration (MIC) after exposure to different cefazolin concentrations; changes in MIC would suggest genotypic features, whereas unchanged MIC would suggest phenotypic behavior. Finally, quantitative reverse transcription-polymerase chain reaction was used to quantify expression of yoeB levels between biofilm and planktonic bacteria after exposure to 1 μg/mL cefazolin for 3 hours.

RESULTS

Although live biofilm mass was reduced by exposure to cefazolin when compared with biofilm mass in controls (39.2 × 10(3) ± 26.4 × 10(3) pixels), where the level after 0.5 µg/mL exposure also showed reduced mass (20.3 × 10(3) ± 11.9 × 10(3) pixels), no further reduction was seen after higher doses (mass at 1.0 µg/mL: 5.0 × 10(3) pixels ± 1.1 × 10(3) pixels; at 10.0 µg/mL: 6.4 × 10(3) ± 9.6 × 10(3) pixels; at 100.0 µg/mL: 6.4 × 10(3) ± 3.9 × 10(3)). At the highest concentration tested (100 µg/mL), residual viable biofilm was present on all three materials, and there were no differences in percent biofilm survival among cobalt-chromium (18.5% ± 15.1%), polymethylmethacrylate (22.8% ± 20.2%), and polyethylene (14.7% ± 10.4%). We found that tolerance was a phenotypic phenomenon, because increasing cefazolin exposure did not result in changes in MIC as compared with controls (MIC in controls: 0.13 ± 0.02; at 0.5 µg/mL: 0.13 ± 0.001, p = 0.96; at 1.0 µg/m: 0.14 ± 0.04, p = 0.95; at 10.0 µg/m: 0.11 ± 0.016, p = 0.47; at 100.0 µg/m: 0.94 ± 0.047, p = 0.47). Expression of yoeB after 1 µg/mL cefazolin for 3 hours in biofilm cells was greater in biofilm but not in planktonic cells (biofilm: 62.3-fold change, planktonic cells: -78.8-fold change, p < 0.001).

CONCLUSIONS

Antibiotics are inadequate at complete removal of the biofilm from the surface of TKA materials. Results suggest that bacterial persisters are responsible for this phenotypic behavior allowing biofilm high tolerance to antibiotics.

CLINICAL RELEVANCE

Antibiotic-tolerant biofilm suggests a mechanism behind the poor results in irrigation and débridement for acute TKA PJI.

Pulse lavage is inadequate at removal of biofilm from the surface of total knee arthroplasty materials

In acute periprosthetic infection, irrigation and debridement with component retention has a high failure rate in some studies. We hypothesize that pulse lavage irrigation is ineffective at removing biofilm from total knee arthroplasty (TKA) components. Staphylococcus aureus biofilm mass and location was directly visualized on arthroplasty materials with a photon collection camera and laser scanning confocal microscopy. There was a substantial reduction in biofilm signal intensity, but the reduction was less than a ten-fold decrease. This suggests that irrigation needs to be further improved for the removal of biofilm mass below the necessary bioburden level to prevent recurrence of acute infection in total knee arthroplasty.

T2 texture index of cartilage can predict early symptomatic OA progression: data from the osteoarthritis initiative

OBJECTIVE

There is an interest in using Magnetic Resonance Imaging (MRI) to identify pre-radiographic changes in osteoarthritis (OA) and features that indicate risk for disease progression. The purpose of this study is to identify image features derived from MRI T2 maps that can accurately predict onset of OA symptoms in subjects at risk for incident knee OA.

METHODS

Patients were selected from the Osteoarthritis Initiative (OAI) control cohort and incidence cohort and stratified based on the change in total Western Ontario and McMaster Universities Arthritis (WOMAC) score from baseline to 3-year follow-up (80 non-OA progression and 88 symptomatic OA progression patients). For each patient, a series of image texture features were measured from the baseline cartilage T2 map. A linear discriminant function and feature reduction method was then trained to quantify a texture metric, the T2 texture index of cartilage (TIC), based on 22 image features, to identify a composite marker of T2 heterogeneity.

RESULTS

Statistically significant differences were seen in the baseline T2 TIC between the non-progression and symptomatic OA progression populations. The baseline T2 TIC differentiates subjects that develop worsening of their WOMAC score OA with an accuracy between 71% and 76%. The T2 TIC differences were predominantly localized to a dominant knee compartment that correlated with the mechanical axis of the knee.

CONCLUSION

Baseline heterogeneity in cartilage T2 as measured with the T2 TIC index is able to differentiate and predict individuals that will develop worsening of their WOMAC score at 3-year follow-up.