Plantar fasciitis: prescribing effective treatments

Plantar fasciitis is one of the most common painful disorders experienced by people in running and jumping sports. While the prognosis for recovery with conservative care remains excellent-more than 90% of athletes ultimately respond-the prolonged duration of symptoms affects sports participation. Studies that examined various treatment options found mixed results, so finding the most effective treatment can be challenging. A logical treatment approach with emphasis on biomechanics, rehabilitation, and training adaptation will help expedite return to sport.

Healing heel pain: help for plantar fasciitis

If your feet, especially the heels and arches, hurt when you step out of bed in the morning, you may have plantar fasciitis. It may take 6 months or longer for the pain to go away, but there are some things you can do in the meantime to cope with the pain and heal faster.

Did exclusive breast-feeding and early discharge lead to excessive bilirubin levels in newborns in Antigua and Barbuda?

Hyperbilirubinaemia is a common neonatal problem worldwide and is the leading cause of admission to the Special Care Nursery in Antigua and Barbuda. In 1990, the Innocenti Declaration in support of breast-feeding led to the adoption of the Baby-Friendly Hospital Initiative in many countries of the Caribbean, including Antigua and Barbuda. Comparing 1989 to the years 1992 to 1994, the Special Care Nursery at Holberton Hospital experienced a 40% increase in newborns admitted with hyperbilirubinaemia (peak total bilirubin > 12 mg/dl or 205 mumol/l). A retrospective review of Special Care Nursery and Maternity Ward records was undertaken to determine the incidence and aetiology of hyperbilirubinaemia from 1992 to 1994. There were 3721 infants born in Antigua and Barbuda in those years, 98% of Afro-Caribbean or mixed ancestry. The overall incidence of peak total bilirubin over 12 mg/dl (205 mumol/l) was 12.5% (466/3721), not inconsistent with the reported incidence of 8 to 20% in other countries. However, the incidence of higher levels of hyperbilirubinaemia in Antigua and Barbuda exceeded those reported for other countries. In Antigua and Barbuda, total bilirubin of 15 mg/dl (255 mumol/l) or higher was found in 263 of 3721 infants (7.1%) compared to 5.9% in India and 2% of breast-fed infants in the United States of America (USA). Total bilirubin of 20 mg/dl (340 mumol/l) or higher was seen in 91 of 3721 infants (2.5%) exceeding reported prevalence in the USA for both African-American and Caucasian infants (1%) and equal to the reported prevalence in Asian infants (2%). The possible aetiologies of hyperbilirubinaemia in neonates with total bilirubin 18 mg/dl (306 mumol/l) or higher in our patients were investigated. Medical records of 134 of 156 (86%) infants having this level of hyperbilirubinaemia were available for review. The possible reason for hyperbilirubinaemia was ABO incompatibility in 4/134 (3%), Rh incompatibility in 1/134 (1%), prematurity in 12/134 (9%) and sepsis neonatorum in 21/134 (16%). The hyperbilirubinaemia was idiopathic in 96/134 (71%) infants. Newborns in Antigua and Barbuda were discharged 3.7 days after their mothers' admission, with 50% discharged prior to 48 hours of age. Early discharge in developed countries has led to increased readmissions for hyperbilirubinaemia. Following the appointment of a dietitian to supervise breast-feeding, admissions for hyperbilirubinaemia fell by 50% by 1998. These data suggest that exclusive breast-feeding and early discharge led to an epidemic of neonatal hyperbilirubinaemia in Antigua and Barbuda.

Use of tissue plasminogen activator for thrombolysis in occluded peritoneal dialysis catheters in children

Peritoneal dialysis is often the renal replacement therapy of choice in pediatric patients, but the smaller catheters are at high risk for occlusion by fibrin clots. Tissue-type plasminogen activator (t-PA) is a recombinant protease specific for fibrin, and has been shown to be an effective thrombolytic for central venous catheters. The present study aimed to demonstrate the effectiveness of t-PA for thrombolysis in occluded peritoneal catheters. Six patients between 3 weeks and 15 years of age presented with 7 episodes of occluded peritoneal catheters. In all cases, t-PA (2 mg in 40 mL normal saline) was instilled into the catheter. Patency was assessed after 60 minutes by rapid instillation and drainage of 10 mL dialysis solution per kilogram patient body weight. Thrombolysis was effective in 4 of 7 attempts. In 2 cases, occlusion occurred in the setting of acute peritonitis. In 2 cases, catheters required surgical replacement. One child developed a leak at the catheter exit site within 24 hours after treatment. No intraperitoneal bleeding was observed, and no changes were observed in systemic coagulation indices [prothrombin time (PT), activated partial thromboplastin time (aPTT), fibrinogen degradation products (FDP), and fibrinogen] assessed pre- and post-thrombolysis. In cases of occluded PD catheters, t-PA appears to be an effective and safe treatment.

Ibandronate treatment decreases the effects of tumor-associated lesions on bone density and strength in the rat

Bisphosphonate treatment is beneficial against symptoms of metastatic bone disease, although less is known about the effect of preventative treatment schedules. We investigated the effect of various treatment regimens of the bisphosphonate, ibandronate (IB), on the preservation of bone quality in a rat model of tumor-induced osteolysis. Osteolytic Walker 256 (W256) carcinosarcoma cells were implanted into the left femur of female Sprague-Dawley rats, resulting in a 10% reduction in bone mineral density (BMD), a 16% reduction in bone density (BD), and a 26% reduction in failure load compared with the right femur 28 days after implantation. IB was administered subcutaneously in five different treatment schedules: (1) IB PRE-POST received IB for 26 days, prior to implantation of W256 cells in the medullary canal of the femur, and for 28 additional days after surgery; (2) IB PRE-POST SHAM received the same IB administration, but with a sham operation; (3) IB PRE received IB injections before W256 cell insertion only; (4) IB PRE-0 received IB injections for 26 days and was then killed to serve as a time zero control; and (5) IB POST received sham injection with saline before W256 cell insertion, and then received IB injections for 28 days until killing. Controls (TUMOR ONLY) received sham injections with saline prior to W256 cell insertion, and then for 28 additional days until killing. We used dual-energy X-ray absorptiometry (DXA) to measure distal femur BMD and bone mineral content (BMC), peripheral quantitative computed tomography (pQCT) to measure distal femur BD, and torsion testing to obtain torsional failure load. Combined preventative and interventional IB treatment best preserved bone mass and strength, although all treatment schedules resulted in significant improvement compared with untreated controls (TUMOR ONLY). The possibility of reducing or even preventing skeletal morbidity in cancer patients with a high risk of developing metastatic spreading to bone is exciting, and warrants further exploration.

The evaluation of a rat model for the analysis of densitometric and biomechanical properties of tumor-induced osteolysis

Pathologic fractures from a reduction in bone mass and strength are a debilitating complication affecting the quality of life of individuals with metastatic lesions. There are a number of existing animal models for studying the effects of bone metastases experimentally, but these models are unsuitable for measuring structural changes in metastatic bone. Our goal was to present an in vivo model for directly investigating the densitometric and structural consequences of tumor-induced osteolysis in long bones. One femur from female Sprague Dawley rats was implanted with Walker Carcinosarcoma 256 malignant breast cancer cells or with a Sham implant. After 28 days, the animals were killed, and both femora of each animal evaluated using histomorphometry, densitometry, and mechanical testing. Compared to Sham-operated controls, we found an 11% decrease in bone mineral content, a 9% decrease in bone mineral density using dual energy X-ray absorptiometry, and a 16% decrease in bone density using peripheral quantitative computed tomography in the group with tumor cell implants. In addition, failure torque was decreased by 35% compared to the contralateral controls and by 41% compared to the Sham-operated controls. Torsional stiffness in the tumor cell-implanted femora was decreased by 35% compared to contralateral controls and by 39% compared to Sham-operated controls. Bone density was only weakly to moderately associated with bone strength in our model. By creating reproducible localized tumor-induced osteolytic lesions in a long bone, this model provides the most direct evaluation of the structural consequences of bone metastases. In the future, this model may provide a method for determining the effects of new therapeutic approaches on the preservation of bone mass and bone strength in the presence of metastatic bone disease.

Phenotypic characterization of mice bred for high and low peak bone mass

In humans, peak bone mineral density (BMD) is a highly heritable trait and a strong determinant of subsequent osteoporotic fracture risk. To identify the genetic factors responsible for variation in peak BMD, investigators have turned to animal models. In this study we examined the heritability of BMD acquisition and characterized differences in skeletal geometry, histomorphometry, and biomechanical competence between two lines of mice artificially selected for extremes of peak whole body BMD. F2 progeny from a cross between C57BL/6 and DBA/2 inbred strains was used as the foundation population to develop lines selected for either high or low BMD. Whole body BMD was measured by dual-energy X-ray absorptiometry (DXA). By the third generation of selection, highest-scoring BMD (HiBMD) mice exhibited 14% greater peak BMD than lowest-scoring BMD (LoBMD) mice. The mean realized heritability of peak BMD was 36%. Femoral shaft cortical area and thickness and vertebral cancellous bone volume (BV) were significantly greater (16-30%) in the HiBMD line compared with the LoBMD line. Mean cancellous bone formation rates (BFRs) were 35% lower in HiBMD mice compared with LoBMD mice. Failure load and stiffness in the femoral shaft, femoral neck, and L6 vertebrae were all substantially greater (by 25-190%) in HiBMD mice. Thus, these divergently selected murine lines serve to illustrate some of the means by which genetic mechanisms can affect skeletal structure and remodeling. Identification of the individual genes influencing peak BMD in this experimental system will likely reveal some of the genetic determinants of overall bone strength.

Preclinical evidence of normal bone with alendronate

This review summarises the results of preclinical studies aimed at elucidating the mode of action of alendronate and assessing its effects on bone quality. Alendronate preferentially localises at bone resorption sites, where the drug inhibits osteoclastic activity. In a variety of estrogen-deficient animal models, alendronate normalised bone turnover, promoted normal mineralisation and increased bone mass and strength. In these studies, bone formed during alendronate therapy was histologically normal and was not associated with spontaneous fractures. Therefore, preclinical studies have established that the antiresorptive activity of alendronate results in the prevention of bone loss and the accretion of normal-quality bone.

Critically sized osteo-periosteal femoral defects: a dog model

A 21-mm defect was created in 1 femoral diaphysis each of 15 dogs. Periosteum as well as a cylinder of bone was removed, and the defect was stabilized with a bone plate. Twelve of the defects were filled with an equal volume of autogenous cancellous bone harvested from the ipsilateral ilium. Three defects were left untreated. Cranial to caudal radiographs were taken postoperatively and every 4 weeks for 16 weeks. The radiographs were evaluated for healing using two ordinal scales. At 16 weeks, the dogs were euthanized and the femurs harvested for biomechanical testing and histologic evaluation. Both operated and contralateral not operated femurs were mechanically tested to failure in torsion, and load at failure and stiffness were calculated. All dogs tolerated the procedure well, and were using the operated limb within 1 or 2 days postoperatively. There were no complications noted during the 16 weeks of the study. Unfilled defects did not heal and became atrophic nonunions. The defects filled with autogenous cancellous bone healed in a consistent pattern of consolidation, incorporation, and remodeling, with uniform increases of both ordinal scales used. The femoral cortex opposite the bone plate demonstrated most mature remodeling, evident both radiographically as well as histologically. Unoperated femurs failed at 13.61 +/- 3.88 N-m and grafted femurs failed at 2.96 +/- 1.3 N-m, which was 23% of the measurement of the unoperated femur. Relative stiffness of the unoperated femurs was 5974 +/- 4316 N-m2/radian, and grafted femurs had a relative stiffness of 642 +/- 561 N-m2/radian, which was 10.4% of the measurement of unoperated femur. This model proved to be a critically sized defect, which when left unfilled resulted in an atrophic nonunion, and when filled with cancellous bone resulted in a consistent healing pattern.

Bone regeneration by implantation of purified, culture-expanded human mesenchymal stem cells

Bone marrow contains a population of rare progenitor cells capable of differentiating into bone, cartilage, tendon, and other connective tissues. These cells, referred to as mesenchymal stem cells, can be purified and culture-expanded from animals and humans and have been shown to regenerate functional tissue when delivered to the site of musculoskeletal defects in experimental animals. To test the ability of purified human mesenchymal stem cells to heal a clinically significant bone defect, mesenchymal stem cells isolated from normal human bone marrow were culture-expanded, loaded onto a ceramic carrier, and implanted into critical-sized segmental defects in the femurs of adult athymic rats. For comparison, cell-free ceramics were implanted in the contralateral limb. The animals were euthanized at 4, 8, or 12 weeks, and healing bone defects were compared by high-resolution radiography, immunohistochemistry, quantitative histomorphometry, and biomechanical testing. In mesenchymal stem cell-loaded samples, radiographic and histologic evidence of new bone was apparent by 8 weeks and histomorphometry demonstrated increasing bone formation through 12 weeks. Biomechanical evaluation confirmed that femurs implanted with mesenchymal stem cell-loaded ceramics were significantly stronger than those that received cell-free ceramics. These studies demonstrate that human mesenchymal stem cells can regenerate bone in a clinically significant osseous defect and may therefore provide an alternative to autogenous bone grafts.

Surgical delay for acute type A dissection with malperfusion

BACKGROUND

An acute type A aortic dissection is considered a surgical emergency. Review of the risk factors for a type A dissection showed that preoperative malperfusion was associated with a 22% (2/9) intraoperative mortality and an 89% (8/9) hospital mortality. Intraoperative deaths were secondary to pulmonary failure resulting from capillary leak; the remaining patients died of multiorgan failure resulting from reperfusion injury.

METHODS

The surgical delay approach was adopted for malperfused patients, and treatment in these patients included percutaneous reperfusion, with aortic fenestration and branch stenting where appropriate. Twenty patients had a type A dissection and malperfusion shown by pulsed-wave Doppler echocardiography, transesophageal echocardiography, or spiral computed tomographic scanning. Malperfusion was documented by angiography. After reperfusion, all patients' conditions were stabilized in the intensive care unit; intravenous beta-blockers were administered to decrease the maximum rate of increase of left ventricular pressure. Once patients completely recovered from the consequences of malperfusion, surgical repair was performed. Statistical comparison of the non-delay and delay groups was performed using Fisher's exact test and Student's t test. Multiple logistic regression analysis was used to establish independent predictors for mortality.

RESULTS

The mean delay to repair was 20 days (2 to 67 days). Four (31%) patients were discharged home and readmitted for operation. Three patients (15%) died preoperatively, 1 of retrograde dissection and rupture and 2 of reperfusion injury. Seventeen underwent surgical repair, with two deaths (12%); 15 (75%) were discharged, with an average follow-up of 16.8 months (p < 0.003). Delay was the only independent predictor of outcome.

CONCLUSIONS

Patients with an acute type A dissection and malperfusion should undergo percutaneous reperfusion, and surgical repair should be delayed until the reperfusion injury resolves.

Biomechanical effects of operative nerve mobilization and transposition in a canine ulnar nerve model

The purpose of this study was to evaluate the effects that operative mobilization and transposition of the ulnar nerve have on both neural excursion and mechanical properties. Twelve dogs underwent ulnar nerve transposition and postoperative casting. Four animals were killed at 3 weeks and four animals were killed at 6 weeks. Four animals had their casts removed at 3 weeks, were allowed to ambulate, and were killed at 6 weeks. Operated and contralateral control nerves were compared. Neural excursion was measured near the elbow and 12 cm proximally. The nerves were harvested and their mechanical properties determined. Repeated measures analysis of variance revealed significant differences in longitudinal excursion between control and experimental groups at both sites. Ultimate strain, ultimate strength, and modulus were significantly reduced in the experimental groups. No differences were seen in cross-sectional area or stiffness between control and experimental groups. Analysis revealed no independent effect of the rehabilitation method. Results of this study indicate that significant changes in neural excursion, ultimate strain, ultimate strength, and modulus occur following ulnar nerve mobilization and transposition and that these changes persist throughout the early postoperative period.

New features of the locust optic lobe: evidence of a role for nitric oxide in insect vision

The enzyme nitric oxide synthase can be localised by NADPH-diaphorase histochemistry. Here we have applied this technique to the optic lobe of the locust Schistocerca gregaria and revealed new features of the insect visual system. Extensive but locally intense staining is associated with identified tracts, distinct neuropiles and cell body groups, and a detailed analysis of stained elements is provided here. The most striking staining occurs in the anterior lobe of the lobula complex and its connection with the medulla by means of the dorsal uncrossed bundle. Eleven groups of cell bodies are identified and their contribution to fibre tracts and neuropile areas is described. Diaphorase-positive fibre tracts pass between all major subdivisions of the optic lobe, but there are no conspicuous fibre connections from the optic lobe to the brain. The widespread distribution of NADPH-diaphorase staining in the optic lobe suggests that nitric oxide is likely to play an important role in information processing in insect vision.

Specimen processing: centralized or decentralized?

Specimen processing for the clinical laboratories of a large pediatric teaching hospital laboratory was centralized in 1991. A highly efficient service area evolved through reengineering and renovations and effected a 20% reduction in operating costs. Work flow analysis identified areas for improvements, renovations created a more efficient use of space, and staffing decreased from 18.4 to 8.5 FTEs without compromising service.

Long-term safety of the aminobisphosphonate alendronate in adult dogs. I. General safety and biomechanical properties of bone

Alendronate (4-amino-1-hydroxybutylidene bisphosphonate, ALN) is an aminobisphosphonate that is being developed for the treatment of diseases characterized by increased bone resorption. The purpose of this study was to assess the long-term safety of ALN with special emphasis on bone strength and bone morphology. Thirty-two (16 males and 16 females) 83- to 86-week-old beagle dogs were treated p.o. for up to 3 years with ALN at 0.00, 0.25, 0.5 or 1.0 mg/kg/day. The following parameters of toxicity were assessed: physical signs, body weight, ophthalmology, radiographic evaluation of bone, electrocardiography, hematology, clinical chemistry, urinalysis, necropsy including organ weight assessment, histopathology and biomechanical testing of bone. There were no apparent compound-related alterations in any of the above mentioned parameters except the expected changes (related to the pharmacological activity of ALN) in serum phosphorus and Ca concentrations and in the histology of bones with active endochondral bone formation (rib). There were mild transient reductions in the serum phosphorus and Ca concentrations at the 1.0 mg/kg/day dose level during the early part of the study. There was a dose-dependent delay in bone remodeling in the ribs of all dogs treated with ALN. There was no similar change in the tibia. Most importantly, there were no spontaneous fractures and there were no changes in the structural properties of femoral or vertebral bone. The total ALN content of bone in an average dog (10 kg) after 3 years of treatment with approximately five items of the intended dose for the treatment of osteoporosis was approximately 8 mg, which is only 0.001% of total bone mass (700 g). Introduction.

Optimization technique for the calculation of in vitro three-dimensional vertebral motion

A method for the calculation of translations and Eulerian rotations of an orthogonal axis system with respect to a fixed reference is described with application to the measurement of position in a vertebral motion segment. Kinematic equations were derived to compute the three-dimensional motion of a moving vertebra relative to an adjacent fixed body, without the requirement of a direct physical link between the two bodies. For this calculation, the quadratic error of the lengths of six position vectors was minimized to obtain a mathematically optimal estimate of the translations and rotations. Tests with a rigid model resulted in mean maximum overall system errors of 2.8 percent for the measurement of translation (translations less than 3.5 mm) and 6.1 percent for the measurement of rotations (rotations less than 10 deg) limited by transducer accuracy. The mathematical techniques presented for the quantitative description of rigid body motion, based on the measurement of three reference vectors, may be extended to a broad range of kinematic problems.

Flexibility and distraction after monosegmental and bisegmental lumbosacral fixation with angular stable fixators

STUDY DESIGN

In human lumbosacral spines, the flexibility and intersegmental distraction allowed by four monosegmental and bisegmental intrapedicular devices during compression and flexion/compression loading were investigated.

OBJECTIVES

To compare the flexibility and intersegmental distraction allowed by four monosegmental and bisegmental intrapedicular, lumbosacral fixation devices applied to destabilized cadaveric spines, and to determine the effect of each device on the flexibility and intersegmental distraction of the motion segment above each fused segment.

SUMMARY OF BACKGROUND DATA

The lumbosacral segment is the most mobile region in the lumbar spine, exhibiting the highest range of motion in both flexion and extension. Therefore, the fixation of this and the adjacent segment is of special clinical interest.

METHODS

L5-S1 facetectomy or L5 laminectomy procedures were performed on cadaveric human lumbosacral spines. Fixation devices then were applied across one or two levels, and intersegmental motion under flexion/compression or under pure compression loads was monitored.

RESULTS

The flexibility and posterior strain allowed by the four implants did not differ significantly between implants. The strain across the stabilized site (monosegmental and bisegmental) was below 10% for all devices tested. The flexibility and distraction were reduced to levels below intact after the fixators were applied. The distraction across the segment above the fusion was not increased because of fixation with these four fixators.

CONCLUSIONS

Angular stable fixation devices, such as those described here, provide adequate stabilization of the posteriorly destabilized spine.

Comparison of alendronate and sodium fluoride effects on cancellous and cortical bone in minipigs. A one-year study

Fluoride stimulates trabecular bone formation, whereas bisphosphonates reduce bone resorption and turnover. Fracture prevention has not been convincingly demonstrated for either treatment so far. We compared the effects of 1-yr treatment of 9-mo-old minipigs with sodium fluoride (NaF, 2 mg/kg/d p.o.) or alendronate (ALN, 4 amino-1-hydroxybutylidene bisphosphonate monosodium, 1 mg/kg/d p.o.) on the biomechanical and histomorphometric properties of pig bones. As expected, NaF increased and ALN decreased bone turnover, but in these normal animals neither changed mean bone volume. NaF reduced the strength of cancellous bone from the L4 vertebra, relative to control animals, and the stiffness (resistance to deformation) of the femora, relative to the ALN group. In the ALN-treated animals, there was a strong positive correlation between bone strength and L5 cancellous bone volume, but no such correlation was observed in the NaF group. Furthermore, the modulus (resistance to deformation of the tissue) was inversely related to NaF content and there was a relative decrease in bone strength above 0.25 mg NaF/g bone. Moreover, within the range of changes measured in this study, there was an inverse correlation between bone turnover, estimated as the percentage of osteoid surface, and modulus. These findings have relevant implications regarding the use of these agents for osteoporosis therapy.

[Biomechanical studies of bisegmental lumbosacral stabilization using the internal fixator or PMMA-simulated fusion]

The implantation of fixation devices increases the primary stability after surgery significantly. Little is known about the comparison of flexibility of instrumented and posterolateral fusions or the lumbosacral distractions spondylodesis (LSDS). The purpose of the study was to compare the flexibility of instrumented and posterolateral fusions or LSDS after simulation with polymethylmethacrylate (PMMA). Dynamic testing from 0-16 Nm in flexion/compression and 0-900 N in compression was performed on 14 lumbosacral spines. The spines were tested intact, after laminectomy, instrumentation with an internal fixateur L5-S1, and simulation of posterolateral fusion L4-S1 or LSDS and thereafter a pseudoarthrosis was simulated. The laminectomy resulted in a significant increase of flexibility and posterior distraction in flexion and compression. The stabilization with an internal fixateur or PMMA simulation for posterolateral fusion or LSDS resulted in a significant decrease of the flexibility. Creation of a unilateral pseudoarthrosis did not effect the flexibility. The instrumented fusion as well as the PMMA simulated bony posterolateral fusion and LSDS resulted in this model in a significant stabilization of the laminectomy. After unilateral fusion the flexibility was not significantly increased.

Nitric oxide synthesis in locust olfactory interneurones

The brain of the locust Schistocerca gregaria contains a nitric oxide synthase (NOS) that has similar properties to mammalian neuronal NOS. It catalyses the production of equimolar quantities of nitric oxide (NO) and citrulline from l-arginine in a Ca2+/calmodulin- and NADPH-dependent manner and is inhibited by the Nomega-nitro and Nomega-monomethyl analogues of l-arginine. In Western blots, an antiserum to the 160 kDa rat cerebellar NOS subunit recognises a locust brain protein with a molecular mass of approximately 135 kDa. NOS is located in several parts of the locust brain, including the mushroom bodies, but it is particularly abundant in the olfactory processing centres, the antennal lobes. Here it is present in two groups of local interneurones (a pair and a cluster of about 50) that project into the neuropile of the antennal lobes. The processes of these neurones terminate in numerous glomerulus-like structures where the synapses between primary olfactory receptor neurones and central interneurones are formed. NOS-containing local interneurones have also been identified in the mammalian olfactory bulb, suggesting that NO performs analogous functions in locust and mammalian olfactory systems. As yet, nothing is known about the role of NO in olfaction, but it seems likely that it is involved in the processing of chemosensory input to the brain. The locust antennal lobe may be an ideal 'simple' system in which this aspect of NO function can be examined.

Cortical cerebral blood flow cycling: anesthesia and arterial blood pressure

Cycling of various cerebral metabolic substances, arterial vascular diameter, and flow has been noted by many workers at a frequency near 0.1 Hz. Suspicion that this phenomenon is dependent on the type of anesthesia led us to investigate the occurrence of cerebral blood flow (CBF) cycling with different anesthetics. Fifteen Sprague-Dawley rats were anesthetized with either pentobarbital (n = 5, 40-50 mg/kg), alpha-chloralose (n = 5, 60 mg/kg), or halothane (n = 5, 1-0.5%). Body temperature was maintained at 37 degrees C. Femoral arterial and venous catheters were placed, and a tracheotomy was performed, permitting artificial ventilation with 30% O2-70% N2. A closed cranial window was formed over a 3-mm diameter craniotomy. Mean arterial pressure (MABP), arterial partial pressures of CO2 and O2 (PaCO2 and PaO2), and pH were controlled and stabilized at normal values. CBF was determined using laser Doppler flowmetry. To induce cycling, MABP was transiently and repeatedly lowered by exsanguination. Fast Fourier analysis of selected 64-s flow recordings (n = 38) was performed. CBF cycling was observed, independent of the type of anesthesia, in all animals. In 36 epochs, cycling was induced when MABP was reduced to a mean pressure of 65 +/- 1.5 mmHg. The mean frequency and amplitude were 0.094 +/- 0.003 Hz and 6.6 +/- 0.5%, respectively. Cycling occurred without blood withdrawal in two epochs. With the use of the blood-withdrawal epochs (n = 36), all three anesthetics shared a common linear slope between amplitude and blood pressure (P < 0.02) and blood pressure change (P < 0.01). Pentobarbital differed from alpha-chloralose and halothane in the relation between cycling frequency and blood pressure. Only pentobarbital exhibited correlation between frequency and blood pressure (P < 0.02) and blood pressure change (P < 0.001). The occurrence of these oscillations is not related to the type of anesthesia, and they usually occur at MABP values that are near or just above the lower limit of autoregulation. At this pressure level, CBF oscillations would suggest that vasoconstrictive and dilatory forces are no longer in balance, but alternatively vying for control.

Healing of large segmental defects in rat femurs is aided by RhBMP-2 in PLGA matrix

Recombinant human bone morphogenetic protein-2 (rhBMP-2) can be used to enhance the repair of congenital or acquired bone pathologies when formulated in the appropriate carrier. Poly [D,L-(lactide-co-glycolide)] (PLGA) has been shown to be an effective carrier of rhBMP-2. We investigated several particle sizes PLGA and several doses of rhBMP-2 in a rat orthotopic model. We also investigated the effects of a fibrinolytic inhibitory agent, epsilon aminocaproic acid (EACA), on the healing response. Our data indicate that higher doses of rhBMP-2 resulted in increased failure torque (408 +/- 70 N-mm or 60% of the intact value) and higher incidence of union (100%). The induced bone in femurs treated with the smaller particle size PLGA achieved the greatest torsional stiffness and strength. The presence of rhBMP-2 was necessary for new bone to form, but the presence of EACA did not change these results; the use of the PLGA carrier appeared to increase bone strength and stiffness. In fact, with higher doses of rhBMP-2 in PLGA, the stiffness of the new bone was equal to that of intact controls (64 +/- 20 N-mm/deg [intact femurs] versus 45 +/- 10 N-mm/degree [medium dose in small PLGA], 61 +/- 17 N-mm/degree [high dose in small PLGA], and 36 +/- 11 N-mm/degree [medium dose in large PLGA]; P > .05). In conclusion, PLGA implanted with rhBMP-2 effectively aided in healing large segmental defects in rat femurs.

Phase I study of highly selective supradose cisplatin infusions for advanced head and neck cancer

PURPOSE

To determine the maximum dose-intensity of cisplatin (DDP) that could be administered by selective intraarterial (IA) infusion in combination with systemic sodium thiosulfate neutralization to patients with head and neck carcinoma.

PATIENTS AND METHODS

Forty-two patients (23 untreated stage III/IV, 19 recurrent) received highly selective IA DDP, rapidly delivered through microcatheters placed angiographically, to a maximum dose-intensity of 200 mg/m2/wk. Concurrently, the systemic effects of DDP were neutralized by intravenous (IV) bolus sodium thiosulfate.

RESULTS

Problems related to the infusion technique occurred in eight of 140 courses, all of which were inconsequential. The rates of reversible grade I/II and grade III/IV toxicity were 14.8% and 1.1%, respectively. Dose-limiting toxicity, which consisted of severe electrolyte loss, occurred at a dose of 200 mg/m2/wk. The maximum-tolerated dose of DDP was 150 mg/m2 administered weekly for four doses. The overall and complete response rates in 38 assessable patients were 19 of 22 (86%) and nine of 22 (41%) for stage III/IV untreated tumors and 10 of 16 (62%) and four of 16 (25%) for patients with recurrent disease, respectively.

CONCLUSION

This pharmacologic strategy permits the selective and rapid delivery of extremely high doses of DDP to head and neck carcinomas with minimal procedural complications, low systemic toxicity, and high tumor response rates.

A comparison of the effects of automated percutaneous diskectomy and conventional diskectomy on intradiscal pressure, disk geometry, and stiffness

Diskectomy, chemonucleolysis, percutaneous diskectomy, and laser ablation are used to treat patients with sciatica. The effects of percutaneous diskectomy on the intradiscal pressure of the human disk are not known. Our aims were to determine (a) whether removal of nucleus through automated percutaneous diskectomy significantly reduces intradiscal pressure without altering the disk geometry and stiffness, and if so, how much nucleus removal is required to achieve these goals; and (b) whether the effects of conventional diskectomy on these same parameters are equivalent to removal of nucleus through automated percutaneous diskectomy. Cyclic compressive loads of 20-900 N were applied to lumbar disks. Conventional diskectomy or automated percutaneous diskectomy (performed for 40 min with biomechanical measurements made four times at 10-min intervals) was then performed under zero load and the specimens retested under the same cyclic compressive loading. There were significant (p < 0.01) decreases in intradiscal pressure (by 7% under 900 N) after 10 min of automated percutaneous lumbar diskectomy. There were no further significant decreases in pressure during the next 30 min of percutaneous diskectomy. There were also significant decreases in pressure due to a puncture hole made with the Nucleotome trephine alone, without removal of disk material, and there was no difference in pressure after trephining alone and after percutaneous diskectomy. Decreases in disk height were significant, ranging from 5% at 10 min to 7% at 40 min of treatment. There were equivalent decreases in intradiscal pressure and disk height due to removal of similar amounts of nucleus during conventional diskectomy and during 40 min of percutaneous diskectomy.(ABSTRACT TRUNCATED AT 250 WORDS)

The effects of 2-year treatment with the aminobisphosphonate alendronate on bone metabolism, bone histomorphometry, and bone strength in ovariectomized nonhuman primates

This study examined the effect of 2 yr of treatment with the aminobisphosphonate alendronate (ALN) (0.05 or 0.25 mg/kg i.v. ALN every 2 wk) on estrogen deficiency bone loss and bone strength changes in ovariectomized (OVX) baboons (n = 7 per group) and the ALN mode of action at the tissue level. Biochemical markers of bone turnover increased in OVX animals and were maintained by ALN treatment at non-OVX levels (low dose) or below (high dose). 2 yr of treatment produced no cumulative effects on bone turnover markers. Histomorphometry showed a marked increase in cancellous bone remodeling in OVX animals. Activation frequency increased from 0.48 to 0.86 per yr (L5 vertebra), and the osteoid surfaces from 9 to 13.5% (P < 0.05). No changes were observed in eroded and osteoclast surfaces. ALN treatment decreased activation frequency and indices of bone formation to control levels (low dose) or below (high dose), did not change indices of mineralization, and increased bone mineral density (BMD) in the lumbar vertebrae (L2-L4) by 15% at 0.25 mg/kg (P < 0.05), relative to vehicle-treated animals. The mean strength of cancellous bone (L4) increased by 44% (low ALN dose) and 100% (high dose), compared with vehicle. The strength of individual bones correlated with the square of the L2-L4 BMD (r = 0.91, P < 0.0034). In conclusion, ALN treatment reversed the effects of ovariectomy on cancellous bone turnover and increased bone mass and bone strength in baboons.

Effect of screw diameter, insertion technique, and bone cement augmentation of pedicular screw fixation strength

This study investigated (1) the effect of screw diameter and insertion technique in lumbar vertebrae, and insertion site in the sacrum, on the axial pullout force and transverse bending stiffness of pedicle screws, and (2) the effect of bone cement augmentation using polymethylmethacrylate (PMMA) and the biodegradable composite, poly(propylene glycol-fumarate) on axial pullout force and transverse bending stiffness of pedicle screws inserted into lumbar vertebrae. The axial pullout force and transverse bending stiffness of a 6.25-mm Steffee screw and a 6-mm Kluger screw did not differ significantly in vertebral bodies of similar equivalent bone mineral density. The axial pullout force of Schanz screws was significantly increased with a 1-mm increase in screw diameter. However, there was no significant increase in transverse bending stiffness. In the sacrum, an approach through the S1 facet produced significantly higher axial pullout forces and transverse bending stiffness than the approach described by Harrington and Dickson. PMMA and a biodegradable composite bone cement poly(propylene glycol-fumarate) both increased the axial pullout force. PMMA also increased the transverse bending stiffness.

Pull-out strength of suture anchors for rotator cuff and Bankart lesion repairs

Surgical reconstructions of anterior-inferior shoulder instabilities and rotator cuff injuries require secure fixation of soft tissue to bone. Sutures are inserted directly through transosseous tunnels in current techniques, which are surgically complex and not always adequate for fixation strength. Using fresh-frozen cadaveric human specimens, our objectives were 1) to compare immediate pull-out strength of two versions of polyacetal suture anchors (wedge and rod) with conventional suture-only attachment techniques in Bankart lesion and rotator cuff repairs, and 2) to compare pull-out strength of the two polyacetal suture anchors with a metallic suture anchor. Our results indicate no significant differences in fixation strength of Bankart lesions or rotator cuff repairs using sutures only, or using wedge or rod polyacetal suture anchors (P = 0.70). Pull-out force did not differ significantly (P = 0.37) between the two polyacetal anchors. Polyacetal anchors exhibited higher pull-out forces than metallic anchors when inserted into metaphyseal regions of the tibia and significantly higher pull-out forces (P < 0.001) when inserted into metaphyseal regions with thicker cortical walls. Our results indicate that both polyacetal suture anchors provide adequate immediate fixation for soft tissue repairs in the human shoulder.

Continuous alendronate treatment throughout growth, maturation, and aging in the rat results in increases in bone mass and mechanical properties

Alendronate (4-amino-1-hydroxybutylidene bisphosphonate) is a novel amino bisphosphonate that is being developed for the treatment of osteolytic bone disorders such as osteoporosis. As part of a 2-year carcinogenicity study, we investigated the morphologic and biomechanical effects of long-term alendronate (ALN) therapy, given throughout skeletal growth, maturation, and aging, on rat vertebrae and femora. Three treatment groups, receiving either deionized water, low- (1.00 mg/kg), or high-dose (3.75 mg/kg) ALN, were given daily oral treatment for 105 weeks. Results from mechanical tests indicate that ALN therapy (in males) increased the vertebral ultimate compressive load by 96% in the high- and 51% in the low-dose groups when compared with controls. ALN similarly increased the male ultimate femoral bending load by 59% in the high- and 31% in the low-dose groups. Vertebrae and femora from female rats treated with both high- and low-dose ALN also failed at significantly higher loads than controls, but no differences were seen between low- and high-dose groups. Morphologic analysis of both male and female vertebrae revealed a dose-dependent increase in area fraction of bone. Rats receiving high-dose ALN had a greater area fraction of bone than those receiving low doses. Both groups were greater than controls. Thus, the administration of ALN resulted in increased femoral cortical bending load when compared with control animals, as well as increased vertebral ultimate compressive load commensurate with a dose-related preservation of vertebral bone.(ABSTRACT TRUNCATED AT 250 WORDS)

Validation of continuous thermal measurement of cerebral blood flow by arterial pressure change

A thermal measurement system to monitor cerebral blood flow (CBF) continuously from the cortical surface is evaluated in vivo. It has a temperature resolution of better than 0.001 degrees C (1 m degrees C) and can compensate for baseline temperature fluctuations in the brain tissue. A new approach has been developed to test the capability of monitoring dynamic CBF response. Transient CBF changes associated with changes in mean arterial blood pressure (MABP) caused by repeated bolus norepinephrine injections are used to examine the response of the measurement system in both the heated mode, sensitive to flow, and the unheated mode, sensitive only to temperature. Experiments on 13 rats demonstrate that changes in the MABP are closely correlated with those of temperature difference in the heated mode. Regression analysis shows a mean slope of 0.9 m degrees C/mm Hg in the heated mode, which is significantly different from zero (p < 0.002) and from the mean slope in the unheated mode (p < 0.002). This indicates that flow signal in the system output can be distinguished from the baseline thermal fluctuations. Thus, the system can be used to detect and study dynamic perfusion changes from the brain surface with minimal tissue damage. Furthermore, analysis of the data shows that the transient flow signal before autoregulation is linearly correlated with changes in MABP.

Effects of combined prostaglandin and alendronate treatment on the histomorphometry and biomechanical properties of bone in ovariectomized rats

Prostaglandin E2 (PGE2) has been shown to stimulate both bone resorption and formation in experimental animals, leading to augmentation of trabecular and cortical bone. The amino bisphosphonate alendronate (ALN) is a potent inhibitor of bone resorption. The objectives of this study were to examine if PGE2 stimulation of bone formation was dependent on bone resorption and if the bone accrued as a result of PGE2 treatment contributed to bone strength. The 48 female Sprague-Dawley rats were assigned to six groups as follows: five groups (8/group) were ovariectomized at the age of 6 months. One group was sacrificed 2 months later to establish baseline conditions, and four groups were treated for 25 days with (1) vehicle, (2) PGE2 at 3 mg/kg/day, (3) ALN sc at 0.8 micrograms/kg/day, and (4) PGE2 + ALN at the respective doses. The sixth group served as nonovariectomized untreated controls. Histomorphometric analysis of 6-10 microns thick tibial sections after in vivo fluorochrome double labeling showed that treatment with PGE2 alone increased endocortical mineral apposition rate and bone formation rate, stimulated production of bone trabeculae in the marrow cavity, and increased cortical porosity. Combined ALN + PGE2 treatment prevented the resorption induced by PGE2 but not the stimulation of bone formation on endocortical and periosteal surfaces and resulted in a significant increase in cortical thickness. Consistent with these observations, the femoral midshaft tested to failure in three-point bending showed a significant increase in strength in the PGE2 + ALN group (181 +/- 15 N) compared to time 0 controls (145 +/- 23 N) or to the ovariectomized vehicle-treated group (141 +/- 28 N).(ABSTRACT TRUNCATED AT 250 WORDS)

Evidence that heterogeneity of cerebral blood flow does not involve vascular recruitment

Recent studies indicate that blood flow to cerebral cortex is not homogeneous but may vary both spatially and temporally. In addition, some investigators have reported that capillaries and arterioles can be recruited to increase cerebral blood flow, an issue that is extremely controversial. The goal of this study was to determine whether recruitment of cerebral blood vessels is an important mechanism in spatial and temporal heterogeneity of cerebral blood flow. In seven anesthetized ventilated rats, different fluorescent tracers were injected 45 and 10 s before decapitation. In addition, [14C]iodoantipyrine also was injected 10 s before decapitation. After the brains were sectioned, fields in the cerebral cortex were examined microscopically for fluorescence and processed for measurement of cerebral blood flow with techniques of quantitative autoradiography and image analysis. With examination of 24 +/- 2 (SE) points in cerebral cortex of each rat, similar numbers of small blood vessels (< or = 10 microns) were counted that contained fluorescent tracers injected 45 and 10 s before decapitation (346 +/- 48 and 355 +/- 42 vessels/mm2, respectively; P > 0.05). Large blood vessels (20-60 microns; 73 +/- 6 vessels in each rat) contained both fluorescent tracers. In addition, adjacent regions of high and low blood flow contained similar numbers of small and large vessels. Our findings indicate that vascular recruitment is not an important mechanism in temporal or spatial heterogeneity of cerebral blood flow.

Cervical injuries under flexion and compression loading

Cervical spine segmental tests were performed to determine the specific patterns of initial cervical injury in response to loading just beyond the point of structural failure. Well-defined combinations of flexion rotation and compression translation were applied to segments with varying degrees of disc and facet degeneration. Twelve cervical spine specimens (from human cadavers ages 52-91 years), each consisting of three vertebrae (two motion segments) from the middle (C2-C5) or lower (C5-T1) regions, were subjected to pure flexion rotation (seven specimens) or to combined flexion rotation and axial compression translation (five specimens). Specimens were sectioned and dissected to determine the patterns of structural failure. Pure flexion, and combined flexion and compression produced similar patterns of injuries. The disc was the most commonly injured structure, with annular injuries noted in 8 of the 12 specimens, and with anterior herniation of the nucleus occurring in two specimens. Wedge fractures and posterior ligament injuries were noted in both specimen groups and with both modes of loading. We conclude that similar patterns of initial anterior bony compressive failure and posterior ligamentous failure can occur with both flexion and with combined flexion-compression, without axial or lateral rotation, at low rates of loading. Anterior cervical disc herniations were produced in both middle and lower cervical segments.

Effects of 4-amino-1-hydroxybutylidene bisphosphonate on bone biomechanics in rats

Bisphosphonates inhibit osteoclast-mediated bone resorption, but their effects on the mechanical behavior of bone remain uncertain. This study investigated the effects of 4-amino-1-hydroxybutylidene bisphosphonate (AHBuBP) on the biomechanical and morphologic properties of bone in ovariectomized rats. Sprague-Dawley rats (four groups, n = 6) were ovariectomized at 3 months of age. From 7 to 13 months, the groups received vehicle or 0.28, 2.8, or 28 micrograms/kg of AHBuBP twice weekly through subcutaneous injection. An additional group of control animals (n = 6) received neither surgery nor drug. We determined the stiffness, yield, and ultimate loads of the femoral midshaft, the sixth lumbar (L6) vertebra, and the femoral neck. Geometric properties of the cortical bone were measured from digitized images of the tibial diaphysis at the level of the synostosis. The area fraction of trabecular bone was determined through the midsagittal plane of the fifth lumbar (L5) vertebra. There were no significant differences in the structural properties of the femoral neck and midshaft, with the exception that the medium-dose group had a greater ultimate load than the vehicle group for the femoral midshaft in bending. Cross-sectional analysis of the tibia did not show significant differences in the inertial properties or area. Ovariectomy caused a significant reduction in the stiffness and ultimate load of L6 and in the area fraction of trabecular bone of L5.(ABSTRACT TRUNCATED AT 250 WORDS)

In vitro hyperextension injuries in the human cadaveric cervical spine

To investigate the relationship between the type of hyperextension injuries and the conditions producing them, nine cervical specimens (occiput to T1) were loaded to failure in tension at a fixed extension angle of 30 degrees. Under these loading conditions, specimens failed at average tensile loads and extension moments of 499 +/- 148 (SD) N and 4.0 +/- 3.1 Nm, respectively. Failure occurred at an average tensile displacement of 18.8 +/- 7.7 mm. The anterior longitudinal ligament ruptured and the intervertebral disc failed in at least one level in all specimens. In four specimens, the disc failed at an additional level, leaving the anterior longitudinal ligament intact at that site. With one exception, all injuries occurred in the lower cervical spine (C5-C6 and C6-C7), the region most often injured in vivo. The location of the injuries was associated with the degree of degeneration of the facet joints and the discs. The discs of the lower cervical spine were significantly more degenerated than those at the C2-C3 level. In addition, the degree of disc degeneration in the noninjured discs was significantly less than in the injured discs. These data help quantify the threshold of injury and the patterns of tissue damage resulting from hypertension loading of the cervical spine.

Cyclosporine in the treatment of nonmicrobial inflammatory ophthalmic disease

Eighteen patients with severe, progressive nonmicrobial inflammatory ophthalmic disease (including five with intermediate uveitis, four with sympathetic ophthalmia and three with serpiginous choroiditis) that had not responded to conventional therapy were treated with cyclosporine. Three of the four patients with sympathetic ophthalmia responded quickly and maximally, and the fourth showed partial improvement. One patient, with several corneal graft failures in the right eye, started cyclosporine therapy after undergoing left corneal transplantation; at the last follow-up visit the graft had been clear for almost 3 years. The response was inconsistent in patients with other types of eye disease. In general, the drug was well tolerated; however, two patients stopped treatment because of unpleasant side effects. No serious or irreversible complications developed. The results suggest that cyclosporine therapy is useful in the treatment of sympathetic ophthalmia and in high-risk corneal transplantation.

A biomechanical study of the fatigue characteristics of thoracolumbar fixation implants in a calf spine model

Clinical failures of internal fixation implants for the treatment of the thoracolumbar spine are generally attributed to fatigue. Few studies, however, have characterized changes in fixation rigidity with time or subjected spine-implant fixation constructs to fatigue loading until failure. Fatigue characteristics of five dorsally applied spinal fixation implants were determined using lumbosacral calf spines, with an L3 vertebrectomy, loaded cyclically in combined compression (maximum 605 N) and flexion (maximum 16 Nm) for up to 100,000 cycles. Displacement transducers monitored motion at the site of instability and at the segment above the implants. Flexibility and strain at these segments were then calculated. A one-way analysis of variance showed that there were no significant differences in flexibility of the five fixation constructs (P greater than .05). A multiple Bonferroni test revealed that the AO and Kluger fixateur interne and Steffee plates, with fixation at L2 and L4, allowed significantly more strain (P less than .01) across the site of instability than did Harrington rods and Luque plates with fixation at L1, L2, L4, and L5. There were no significant differences between fixation constructs in initial strain above the implants. After 10,000 cycles, however, there were significant increases in strain across the segment above the Luque and Harrington implants (P less than .05). Failure of the AO Schanz screw occurred in three of six constructs at a mean of 73,300 cycles. The Steffee screws failed in four of five constructs at a mean of 20,800 cycles. The rods of the Kluger fixateur interne broke in four of five constructs at a mean of 47,800 cycles, and one screw slipped at 11,000 cycles. There were no metal failures in the Harrington or Luque implants.(ABSTRACT TRUNCATED AT 250 WORDS)

Three-dimensional load displacement properties of posterior lumbar fixation

Pedicular fixation devices for the posterior treatment of segmental spinal instability are thought to offer enhanced stabilization compared with sublaminar wire systems, while avoiding the immobilization of multiple normal motion segments. We compared the performance of three dissimilar stabilization systems: the Hartshill rectangle, the Acromed/Steffee interpedicular screw and plate, and the Synthes/Dick fixateur interne. Human cadaveric lumbosacral specimens were first tested intact, then after a laminectomy and a facetectomy at the L3/L4 level, and finally after the fixation devices were sequentially attached. Constructs spanning two to four vertebral levels were compared for stabilization of the resected lumbar spine segments. When tested in compression, the Acromed/Steffee system with pedicular screws at L2-L5 allowed significantly less intersegmental distraction than the Synthes/Dick construct with screws at L2 and L5 only, and less than the intact and the destabilized uninstrumented spine. When sagittally rotated, the Acromed/Steffee construct with screws at L2-L5, or at L2 and L5, allowed significantly less distraction than the intact or destabilized segments, and the construct with screws at L2 through L5 allowed less distraction than the Synthes/Dick constructs with screws at L3/L4 or L2/L5. With the exception of the Acromed/Steffee system with screws at four levels, there were no significant differences in distraction allowed between the Synthes/Dick and Acromed/Steffee constructs, or between the multisegment and single segment constructs. There were no significant differences in stiffness across levels L3/L4 with the various implants. Results indicate that the use of posterior spine constructs significantly augment the stability of posterior segmental defects. Pedicular fixation immediately cephalad and caudad to the defect provided stable fixation in this application.

Importance of freezing time when iodoantipyrine is used for measurement of cerebral blood flow

The goal of the present study was to determine effects of delay of freezing of the brain on distribution of [14C]iodoantipyrine in the brain. Blood flow to parietal cerebral cortex (CBF) and choroid plexus was measured with the indicator fractionation technique and quantitative autoradiography. After injection of iodoantipyrine, each rat was decapitated, and the head was immersed in chlorodifluoromethane (-40 degrees C). The brain was removed from the skull after it was frozen. In some rats, heads were immersed immediately after decapitation, and CBF was markedly heterogeneous. In another group, heads were frozen 3 min after decapitation. In this case, CBF was uniform in its distribution. Average CBF was similar in groups with immediate and delayed freezing (90-104 ml.min-1 x 100 g-1). In contrast, delays in freezing decreased blood flow to choroid plexus from 551 +/- 115 to 261 +/- 48 ml.min-1 x 100 g-1. Our findings indicate that immediate freezing of the brain after decapitation is necessary to prevent diffusion of iodoantipyrine from regions of high blood flow to regions of lower blood flow and underestimations of blood flow in regions with high blood flow.

Importance of bone mineral density in instrumented spine fusions

The effect of equivalent mineral density on pedicular screw fixation strength was investigated. The equivalent mineral density of human vertebral bodies was correlated highly with the pullout force of Kluger screws (r2 = 0.61, P less than 0.02). A moderate to high correlation existed between density and vertical force (r2 = 0.42 for Kluger screws, r2 = 0.55 for Steffee screws, P less than 0.02). In calf vertebral bodies of higher density (146 +/- 14 mg/cc), the forces were significantly higher than in the human vertebral bodies (P less than 0.05). Human lumbosacral spines were instrumented with three different fixators: Steffee plates, AO fixateur interne, and Kluger fixateur interne. Of five specimens with a mean density of 88 +/- 11 mg/cc, one screw loosened. More than one screw loosened in six specimens with a mean density of 63 +/- 12 mg/cc, and no screw loosened in four specimens with a mean density of 114 +/- 38 mg/cc. Measurement of equivalent mineral density correlates with the fixation strength of the intrapedicular screws in vitro and should be considered in patients with signs of osteopenia before using pedicular screws for spinal fusions. It is also concluded that calf spines are a good model for testing implants because they tend to focus failure processes in the implant rather than in the implant-bone interface.

Physical and mechanical properties of calf lumbosacral trabecular bone

The physical and mechanical properties of calf lumbar and sacral trabecular bone were determined and compared with those of human trabecular bone. The mean tissue density (1.66 +/- 0.12 g cm-3), equivalent mineral density (169 +/- 36 mg cm-3), apparent density (453 +/- 89 mg cm-3), ash density (194 +/- 59 mg cm-3), ash content (0.6 +/- 0.05%), compressive strength (7.1 +/- 3.0 MPa) and compressive modulus (173 +/- 97 MPa) of calf trabecular bone are similar to those of young human. There were moderate, positive linear correlations between apparent density and equivalent mineral density, ash density, and compressive strength; and between compressive strength and equivalent mineral density (R2 ranging from 0.35 to 0.48, p less than 0.001). Apparent density, ash density, and equivalent mineral density did not differ significantly in different regions. In contrast to humans, the compressive strength increased from posterior, near the facet, to the anterior vertebral body. These comparisons of physical and mechanical properties, as well as anatomical comparisons by others, indicate that the calf spine is a good model of the young non-osteoporotic human spine and thus useful for the testing of spinal instrumentation.

Variations of stiffness and strength along the human cervical spine

The load-displacement response and strength of the mid (C2-C5) and lower (C5-T1) cervical regions were determined for combinations of sagittal loads, in vitro. In unpaired t-test comparisons, the mid cervical region was significantly stiffer in compression and extension than the lower region. In tests to failure, failure in six out of seven mid cervical specimens resulted from flexion alone, while combined compression-flexion was required to fail five of the eight lower cervical specimens. Post-test dissections revealed no regional differences in the pattern of failure. In addition to sagittal tests, the load-displacement responses of three-vertebrae cervical specimens were measured with the upper body axially rotated with respect to the lower body. The effect of this pre-torsion was to diminish the zone of low slope near zero load for axial, shear, and flexion motion. Three of the four axially rotated specimens failed in flexion without added compression. These controlled load-displacement measurements of cervical spine specimens describe for the first time the continuous flexion-compression response up to failure, and suggest that consideration of the biomechanics of three apparently distinct mobile regions of the cervical spine (C1-C2, C2-C5, C5-T1) may facilitate the interpretation of hazardous conditions and the diagnosis of injury. These data also provide basic information for the in vitro investigation of passive cervical spine protection such as helmets and head-rests, suggesting that the head should be kept in a non-rotated position to reduce risk of injury.

Diagnosis and control of neonatal losses in sheep

Perinatal mortality is affected by a variety of management factors and disease processes that create significant losses for the sheep industry. Annual production losses prior to weaning include roughly 15% to 20% of the lamb crop. The majority of these perinatal losses occur during the prenatal, natal, and early postnatal periods, with the predominant wave of mortality occurring during the first several days following birth. Causes of perinatal mortality may vary between flocks and between geographic areas; however, four dominant categories of lamb loss consistently surface: (1) abortions; (2) hypothermia, starvation, and exposure; (3) pneumonia; and (4) stillbirth and dystocia. They account for roughly 50% to 75% of all documented perinatal losses. Veterinarians and producers need to work together to document the type of losses that occur in a given flock and then design economic prevention programs that address these problems. In most cases, traditional prevention programs will need to be replaced by a comprehensive management scheme addressing nutrition, genetics, housing, marketing, lambing husbandry, and labor.