Polyoxazolines based mixed micelles as PEG free formulations for an effective quercetin antioxidant topical delivery

This study aims to prove the value of the polyoxazolines polymer family as surfactant in formulations for topical application and as an alternative to PEG overuse. The amphiphilic polyoxazolines (POx) were demonstrated to have less impact on cell viability of mice fibroblasts (NIH3T3) than their PEG counterparts. Mixed micelles, made of POx and phosphatidylcholine, were manufactured using thin film and high pressure homogenizer process. The mixed micelles were optimized to produce nanosized vesicles of about 20 nm with a spherical shape and stable over 28 days. The natural lipophilic antioxidant, quercetin, was successfully encapsulated (encapsulation efficiency 94 ± 4% and drug loading 3.6 ± 0.2%) in the mixed micelles with no morphological variation. Once loaded in the formulation, the quercetin impact on cell viability of NIH3T3 was decreased while its antioxidant activity remained unchanged. This work highlights the capacity of amphiphilic POx to create, in association with phospholipids, stable nanoformulations which show promise for topical delivery of antioxidant and ensure skin protection against oxidative stress.

What is a clinically meaningful survival benefit in refractory metastatic colorectal cancer?

Assessment of the clinical benefit of cancer treatments can be highly subjective, influenced by both perspective and context. Such assessments are required in regulatory and policy decision-making, but consistency between jurisdictions is often lacking. Clear and consistent standards for determining when a treatment offers a meaningful benefit, relative to the current standard of care, can help to address issues of equity and transparency in health technology assessment. For metastatic colorectal cancer (mcrc), no standardized Canadian definition of clinically meaningful benefit has yet been proposed. Colorectal Cancer Canada therefore convened a group of medical oncologists expert in colorectal cancer to review the literature about clinical significance. The resulting consensus is intended to apply to any therapeutic agent being considered in the setting of chemotherapy-refractory mcrc. It was agreed that overall survival is the appropriate measure of clinical efficacy in chemorefractory mcrc. As quantitative targets for efficacy, an improvement of 2 months or more in median overall survival or a hazard ratio for survival of 0.75 or lower (or both) are proposed as the threshold for clinically meaningful benefit. That threshold could be influenced by a treatment's effect on quality of life. Treatment toxicity is also relevant to the assessment of clinical benefit in this setting, specifically when significant differences in treatment tolerability are evident.

Simulations of Heat Transfer in Thermoplastic Injection Molds Manufactured by Additive Techniques

The cost and quality of complex thermoplastic parts manufactured by injection are traditionally limited by the design constraints on the mold cooling system. A possible way to overcome this problem is to produce the mold by additive manufacturing, which makes it possible to freely design the shape and position of the cooling channels. Such molds can have hollow spaces in order to reduce the manufacturing time by Selective Laser Melting and the use of costly materials. The complex geometry resulting from optimized cooling channels and hollow regions makes the prediction of the cooling system performance difficult. This work aims to devise a numerical methodology for the simulation of heat transfer phenomena between the polymer, the mold and the cooling channels. An Immersed Volume approach is chosen, where the different parts of the domain (i.e. the polymer, the cooling channels, the hollow regions and the mold) are represented implicitly and the thermo-mechanical properties of the materials vary smoothly at the interface between the parts. The energy and momentum equations are solved by a stabilized Finite Element method. In order to accurately resolve the large variations of material properties and the steep temperature gradients at interfaces, state-of-the art anisotropic mesh refinement techniques are employed. In a first step, we perform thermal calculations only. We then consider the proper thermo-mechanical coupling in the packing stage, as well as the ejection stage and the thermal contact resistance between the polymer part and the mold, in order to weight their influence on the part and the mold temperatures. The modeling strategy is first validated on a simple geometry of a center-gated disk and compared with experimental measurements. The agreement between the experimental results and the simulation is good. Simulations are then performed on an industrial case which illustrates the ability of the method to deal with complex geometries.

Canadian perspectives: update on inhibition of ALK-positive tumours in advanced non-small-cell lung cancer

Background

Inhibition of the anaplastic lymphoma kinase (alk) oncogenic driver in advanced non-small-cell lung carcinoma (nsclc) improves survival. In 2015, Canadian thoracic oncology specialists published a consensus guideline about the identification and treatment of ALK-positive patients, recommending use of the alk inhibitor crizotinib in the first line. New scientific literature warrants a consensus update.

Methods

Clinical trials of alk inhibitor were reviewed to assess benefits, risks, and implications relative to current Canadian guidance in patients with ALK-positive nsclc.

Results

Randomized phase iii trials have demonstrated clinical benefit for single-agent alectinib and ceritinib used in treatment-naïve patients and as second-line therapy after crizotinib. Phase ii trials have demonstrated activity for single-agent brigatinib and lorlatinib in further lines of therapy. Improved responses in brain metastases were observed for all second- and next/third-generation alk tyrosine kinase inhibitors in patients progressing on crizotinib. Canadian recommendations are therefore revised as follows:■ Patients with advanced nonsquamous nsclc have to be tested for the presence of an ALK rearrangement.■ Treatment-naïve patients with ALK-positive disease should initially be offered single-agent alectinib or ceritinib, or both sequentially.■ Crizotinib-refractory patients should be treated with single-agent alectinib or ceritinib, or both sequentially.■ Further treatments could include single-agent brigatinib or lorlatinib, or both sequentially.■ Patients progressing on alk tyrosine kinase inhibitors should be considered for pemetrexed-based chemotherapy.■ Other systemic therapies should be exhausted before immunotherapy is considered.

Summary

Multiple lines of alk inhibition are now recommended for patients with advanced nsclc with an ALK rearrangement.

Relationship between mold exposure, specific IgE sensitization, and clinical asthma: A case-control study

BACKGROUND

Most of the findings related to the noxious effect of mold sensitization on asthma come from investigations based on Alternaria alternata, Cladosporium herbarum, and Aspergillus fumigatus. However, species such as Penicillium spp, Cladosporium sphaerospermum, Cladosporium cladosporioides, or Aspergillus versicolor display a more pronounced indoor tropism, and their potential harmful respiratory effects cannot be neglected.

OBJECTIVE

The goal of this work was to relate mold sensitizations with asthma severity and with the level of indoor mold contamination among mold-sensitized patients with asthma and nonsensitized patients with asthma.

METHODS

A case-control study was conducted and several asthma severity markers were compared between patients with asthma with and without mold sensitization. Indoor contamination of patients' dwellings was also investigated.

RESULTS

Our findings confirmed the association between sensitization to A fumigatus and severity for patients with asthma in contrast with sensitization to other species. Indoor mold contamination was detected in approximately 90% of dwellings. Overall mold exposure was not associated with asthma severity. However, regardless of the sensitization, exposure to A fumigatus and Penicillium spp in dust was linked to an increased risk of severe asthma.

CONCLUSION

The harmful nature of mold sensitization and mold exposure for patients with asthma was not confirmed in this study. However, sensitization to A fumigatus was associated with an increased risk for severe asthma. A better investigation of the properties of Penicillium spp is recommended because its exposure was found to be associated with a more pronounced impairment of lung function.

Analysis of the No-Flow Criterion Based on Accurate Crystallization Data for the Simulation of Injection Molding of Semi-Crystalline Thermoplastics

It is well known in practice that the shape and dimensions of injected parts are highly dependent on the packing-holding stage. A major problem in semi-crystalline polymers is the prediction of the solidified layer, whose thickness has an important effect on shrinkage and warpage. We propose a pragmatic approach based on the concept of no-flow temperature. This temperature should be related to crystallization temperature, but the choice is not easy because it depends on cooling rate and pressure which are functions of time and position. The objective of the work is to evaluate the sensitivity of an injection molding computation to the no-flow temperature and to evaluate the relevance of its choice. The crystallization temperature of an isotactic polypropylene is determined as a function of cooling rate and pressure in laboratory experiments. The pressure dependence is measured using the original Cristapress cell. As a case study, we simulate the filling and post-filling of a plate mold using Rem3D, a 3D code for injection molding. Three no-flow temperatures and two sets of parameters for temperature dependence of viscosity are tested. Their respective influences on the pressure evolution are shown, and the crystallization temperature calculated a posteriori using the experimental material data is compared to the “arbitrary” no-flow temperature.

Contact killing and antimicrobial properties of copper

With the emergence of antibiotic resistance, the interest for antimicrobial agents has recently increased again in public health. Copper was recognized in 2008 by the United States Environmental Protection Agency (EPA) as the first metallic antimicrobial agent. This led to many investigations of the various properties of copper as an antibacterial, antifungal and antiviral agent. This review summarizes the latest findings about 'contact killing', the mechanism of action of copper nanoparticles and the different ways micro-organisms develop resistance to copper.

Combined genetic approaches yield a 48% diagnostic rate in a large cohort of French hearing-impaired patients

Hearing loss is the most common sensory disorder and because of its high genetic heterogeneity, implementation of Massively Parallel Sequencing (MPS) in diagnostic laboratories is greatly improving the possibilities of offering optimal care to patients. We present the results of a two-year period of molecular diagnosis that included 207 French families referred for non-syndromic hearing loss. Our multi-step strategy involved (i) DFNB1 locus analysis, (ii) MPS of 74 genes, and (iii) additional approaches including Copy Number Variations, in silico analyses, minigene studies coupled when appropriate with complete gene sequencing, and a specific assay for STRC. This comprehensive screening yielded an overall diagnostic rate of 48%, equally distributed between DFNB1 (24%) and the other genes (24%). Pathogenic genotypes were identified in 19 different genes, with a high prevalence of GJB2, STRC, MYO15A, OTOF, TMC1, MYO7A and USH2A. Involvement of an Usher gene was reported in 16% of the genotyped cohort. Four de novo variants were identified. This study highlights the need to develop several molecular approaches for efficient molecular diagnosis of hearing loss, as this is crucial for genetic counselling, audiological rehabilitation and the detection of syndromic forms.

Using a standardised protocol was effective in reducing hospitalisation and treatment use in children with newly diagnosed immune thrombocytopenia

AIM

Childhood immune thrombocytopenia (ITP) has been associated with low bleeding rates and a high frequency of spontaneous remission. Although current guidelines suggest that most patients are just observed, children still receive platelet-enhancing therapies for fear of bleeding complications. We hypothesised that a standardised protocol with a step-down approach would reduce hospitalisation and treatment use.

METHOD

A retrospective chart review was performed on patients diagnosed with acute ITP between January 2010 and December 2014, before (n = 54) and after (n = 37) the standardised protocol, which was introduced in January 2013. Management and events during the first 3 months following diagnosis were recorded.

RESULTS

The protocol resulted in a 34% decrease in the hospitalisation rate (p < 0.001) at diagnosis. Prednisone treatment duration at diagnosis was also significantly reduced (13.1 versus 5.8 days, p = 0.004). Children over 3 years of age were 3.8 times less likely to be hospitalised (95% CI 1.94-7.61) and 2.3 times less likely to receive treatment (95% CI 1.2-4.3). There was no difference in the rate of persistent ITP (38% versus 30%, p = 0.43) or serious bleeding complications (7% versus 5%, p = 0.70).

CONCLUSION

Our ITP management protocol significantly reduced hospitalisation rates and length of prednisone treatment without any increase in disease complications.

Investigation of inflammatory and allergic responses to common mold species: Results from in vitro experiments, from a mouse model of asthma, and from a group of asthmatic patients

Most studies on molds focus on Alternaria alternata and Aspergillus fumigatus. Here, we report on inflammatory and allergenic properties of more typical indoor species Aspergillus versicolor, P. chrysogenum, C. cladosporioïdes, and C. sphaerospermum that were compared to A. alternata and A. fumigatus. In a mouse model, after intranasal instillation, A. alternaria, A. versicolor, and C. sphaerospermum induced the early recruitment of neutrophils and the strong expression of inflammatory markers in the bronchoalveolar lavages fluids. A. fumigatus also induced the early accumulation of neutrophils but with lower levels of inflammatory markers. Chronic treatment induced variable response according to species: P. chrysogenum and A. fumigatus appeared strong pro-allergenic inducers compared to A. alternata and C. sphaerospermum while A. versicolor and C. cladosporioides induced a mixed pro-allergenic/pro-inflammatory response. In mold-sensitized asthmatics, mold-specific Immunoglobulin E (IgE) were detected with an in-house dot-blot assay. A. fumigatus and A. alternata were the most frequent sensitizers. Altogether, P. chrysogenum, P. brevicompactum, C. sphaerospermum, and C. cladosporïoides were the "major sensitizer" (defined as the strongest response against a single mold species) for almost 30% of the asthmatics. These results show that, not only A. alternata and A. fumigatus, but also indoor species have strong inflammatory and allergic properties and a harmful potency.