Cell interactions between human progenitor-derived endothelial cells and human mesenchymal stem cells in a three-dimensional macroporous polysaccharide-based scaffold promote osteogenesis

Several studies have reported the benefits of mesenchymal stem cells (MSCs) for bone tissue engineering. However, vascularization remains one of the main obstacles that must be overcome to reconstruct large bone defects. In vitro prevascularization of the three-dimensional (3-D) constructs using co-cultures of human progenitor-derived endothelial cells (PDECs) with human bone marrow mesenchymal stem cells (HBMSCs) appeared as a potential strategy. However, the crosstalk between the two lineages has been studied in two-dimensional (2-D), but remains unknown in 3-D. The aim of this study is to investigate the cell interactions between PDECs and HBMSCs in a porous matrix composed of polysaccharides. This biodegradable scaffold promotes cell interactions by inducing multicellular aggregates composed of HBMSCs surrounded by PDECs. Cell aggregation contributes to the formation of junctional proteins composed of Connexin43 (Cx43) and VE-cadherin, and an activation of osteoblastic differentiation of HBMSCs stimulated by the presence of PDECs. Inhibition of Cx43 by mimetic peptide 43GAP27 induced a decrease in mRNA levels of Cx43 and all the bone-specific markers. Finally, subcutaneous implantations for 3 and 8 weeks in NOG mice revealed an increase in osteoid formation with the tissue-engineered constructs seeded with HBMSCs/PDECs compared with those loaded with HBMSCs alone. Taking together, these results demonstrate that this 3-D microenvironment favored cell communication, osteogenesis and bone formation.

A nano-hydroxyapatite--pullulan/dextran polysaccharide composite macroporous material for bone tissue engineering

Research in bone tissue engineering is focused on the development of alternatives to allogenic and autologous bone grafts that can stimulate bone healing. Here, we present scaffolds composed of the natural hydrophilic polysaccharides pullulan and dextran, supplemented or not with nanocrystalline hydroxyapatite particles (nHA). In vitro studies revealed that these matrices induced the formation of multicellular aggregates and expression of early and late bone specific markers with human bone marrow stromal cells in medium deprived of osteoinductive factors. In absence of any seeded cells, heterotopic implantation in mice and goat, revealed that only the composite macroporous scaffold (Matrix + nHA) (i) retained subcutaneously local growth factors, including Bone Morphogenetic Protein 2 (BMP2) and VEGF165, (ii) induced the deposition of a biological apatite layer, (iii) favored the formation of a dense mineralized tissue subcutaneously in mice, as well osteoid tissue after intramuscular implantation in goat. The composite scaffold was thereafter implanted in orthotopic preclinical models of critical size defects, in small and large animals, in three different bony sites, i.e. the femoral condyle of rat, a transversal mandibular defect and a tibial osteotomy in goat. The Matrix + nHA induced a highly mineralized tissue in the three models whatever the site of implantation, as well as osteoid tissue and bone tissue regeneration in direct contact to the matrix. We therefore propose this composite matrix as a material for stimulating bone cell differentiation of host mesenchymal stem cells and bone formation for orthopedic and maxillofacial surgical applications.

Interaction between a bisphosphonate, tiludronate and nanocrystalline apatite: in vitro viability and proliferation of HOP and HBMSC cells

Nanocrystalline apatites (NCA) are the inorganic components of mineralized tissues and they have been recently proposed as biomaterials for drug delivery systems. Bisphosphonates (BPs) are currently the reference drugs used to treat diseases involving bone disorders such as osteoporosis. Nevertheless, the interaction phenomena between BP molecules and apatite nanocrystals of bone are not well understood. Therefore, the adsorption characteristics have been examined and cellular activity of tiludronate molecules on NCA as models of bone mineral has been investigated. Adsorption experiments of tiludronate onto NCA were carried out and revealed a Langmuir-type adsorption isotherm. The uptake of tiludronate molecules is associated with a release of phosphate ions, indicating that the main reaction is an ion exchange process involving surface anions. The results evidence the strong affinity of BP molecules for the apatitic surface. The interactions of NCA-tiludronate associations with human osteoprogenitor cells and human bone marrow stromal cells do not reveal any cytotoxicity and evidence the activity of adsorbed tiludronate molecules. Moreover, an evolution of the physico-chemical characteristics of the apatitic substrate during biological study was observed, highlighting the existence of dynamic interactions. This work contributes to clarifying the reaction mechanisms between BPs and biomimetic apatites.

Whatever their differentiation status, human progenitor derived - or mature - endothelial cells induce osteoblastic differentiation of bone marrow stromal cells

Association of the bone-forming osteoblasts (OBs) and vascular endothelial cells (ECs) into a biomaterial composite provides a live bone graft substitute that can repair the bone defect when implanted. An intimate functional relationship exists between these cell types. This communication is crucial to the coordinated cell behaviour necessary for bone development and remodelling. Previous studies have shown that direct co-culture of primary human osteoprogenitors (HOPs) with primary human umbilical vein endothelial cells (HUVECs) stimulates HOPs differentiation and induces tubular-like networks. The present work aims to test the use of human bone marrow stromal cells (HBMSCs) co-cultured with human endothelial progenitor cells in order to assess whether progenitor-derived ECs (PDECs) could support osteoblastic differentiation as mature ECs do. Indeed, data generated from the literature by different laboratories considering these co-culture systems appear difficult to compare. Monocultures of HUVECs, HOPs, HBMSCs (in a non-orientated lineage), PDECs (from cord blood) were used as controls and four combinations of co-cultures were undertaken: HBMSCs-PDECs, HBMSCs-HUVECs, HOPs-PDECs, HOPs-HUVECs with ECs (mature or progenitor) for 6 h to 7 days. At the end of the chosen co-culture time, intracellular alkaline phosphatase (ALP) activity was detected in HOPs and HBMSCs and quantified in cell extracts. Quantitative real-time polymerase chain reaction (qPCR) of ALP was performed over time and vascular endothelial growth factor (VEGF) was measured. After 21 days, calcium deposition was observed, comparing mono- and co-cultures. We confirm that ECs induce osteoblastic differentiation of mesenchymal stem cells in vitro. Moreover, HUVECs can be replaced by PDECs, the latter being of great interest in tissue engineering.

Altered nanofeature size dictates stem cell differentiation

The differentiation of stem cells can be modulated by physical factors such as the micro- and nano-topography of the extracellular matrix. One important goal in stem cell research is to understand the concept that directs differentiation into a specific cell lineage in the nanoscale environment. Here, we demonstrate that such paths exist by controlling only the micro- and nano-topography of polymer surfaces. Altering the depth (on a nanometric scale) of micro-patterned surface structures allowed increased adhesion of human mesenchymal stem cells (hMSCs) with specific differentiation into osteoblasts, in the absence of osteogenic medium. Small (10 nm) depth patterns promoted cell adhesion without noticeable differentiation, whereas larger depth patterns (100 nm) elicited a collective cell organization, which induced selective differentiation into osteoblast-like cells. This latter response was dictated by stress through focal-adhesion-induced reorganization of F-actin filaments. The results have significant implications for understanding the architectural effects of the in vivo microenvironment and also for the therapeutic use of stem cells.

Carbon nanotubes have a deleterious effect on the nose: the first in vitro data

BACKGROUND

The information currently available concerning carbon nanotubes toxicity is disturbing and conflicting. Moreover, little is known about their effect on the nasal cavities, which are the first target for nanoparticles.

MATERIAL AND METHOD

We investigated the cytotoxicity (50 to 0.5 microg/mL) of double-walled carbon nanotube with two independent tests (MTT, Wst-1) on normal human nasal epithelial cells after 12-day exposure (control untreated nasal cells and A549). Nasal cell differentiation function, oxidative stress, the morphological features of cells in contact with DWCNTs and the localizations of the latter were also investigated.

RESULTS

Exposure revealed a dose-dependent decrease in cell metabolic activity and cell growth. In nearly all conditions, normal human nasal epithelial cells were more sensitive than malignant ones. Even with both tests, the cytotoxic threshold dose could not be accurately determined because of dye adsorption by DWCNTs. Nasal cells showed stronger cytokeratin 7 and persistent UEA-I immunostaining. Cytokeratin 19 production was increased at 25 microg/mL and mucus production was stimulated from 0.5 microg/mL. A significant increase in Reactive Oxygen Species was observed from 25 microg/mL. The cell plasma membrane showed several holes and DWCNTs were present in the cytoplasm.

CONCLUSION

DWCNTs seem to have a deleterious effect on nasal cells after 12-day exposure.

Magnetic resonance imaging tracking of human adipose derived stromal cells within three-dimensional scaffolds for bone tissue engineering

For bone tissue engineering, human Adipose Derived Stem Cells (hADSCs) are proposed to be associated with a scaffold for promoting bone regeneration. After implantation, cellularised scaffolds require a non-invasive method for monitoring their fate in vivo. The purpose of this study was to use Magnetic Resonance Imaging (MRI)-based tracking of these cells, labelled with magnetic agents for in vivo longitudinal assessment. hADSCs were isolated from adipose tissue and labelled with USPIO-rhodamine (Ultrasmall SuperParamagnetic Iron Oxide). USPIO internalisation, absence of toxicity towards hADSCs, and osteogenic differentiation of the labelled cells were evaluated in standard culture conditions. Labelled cells were then seeded within a 3D porous polysaccharide-based scaffold and imaged in vitro using fluorescence microscopy and MRI. Cellularised scaffolds were implanted subcutaneously in nude mice and MRI analyses were performed from 1 to 28 d after implantation. In vitro, no effect of USPIO labelling on cell viability and osteogenic differentiation was found. USPIO were efficiently internalised by hADSCs and generated a high T2* contrast. In vivo MRI revealed that hADSCs remain detectable until 28 d after implantation and could migrate from the scaffold and colonise the area around it. These data suggested that this scaffold might behave as a cell carrier capable of both holding a cell fraction and delivering cells to the site of implantation. In addition, the present findings evidenced that MRI is a reliable technique to validate cell-seeding procedures in 3D porous scaffolds, and to assess the fate of hADSCs transplanted in vivo.

Human progenitor-derived endothelial cells vs. venous endothelial cells for vascular tissue engineering: an in vitro study

The isolation of endothelial progenitor cells from human peripheral blood generates a great hope in vascular tissue engineering because of particular benefit when compared with mature endothelial cells. We explored the capability of progenitor-derived endothelial cells (PDECs) to line fibrin and collagen scaffolds in comparison with human saphenous and umbilical cord vein endothelial cells (HSVECs and HUVECs): (a) in a static situation, allowing definition of the optimal cell culture conditions with different media and cell-seeding densities to check cell behaviour; (b) under shear stress conditions (flow chambers or tubular vascular constructs), allowing investigation of cell response and mRNA expression on both substrates by oligonucleotide microarray analysis and quantitative real-time PCR. Well characterized PDECs: (a) could not be expanded adequately with the usual mature ECs culture media; (b) were able to colonize and grow on fibrin glue; (c) exhibited higher resistance to oxidative stress than HSVECs and HUVECs; (d) withstood physiological shear stress when lining both substrates in flow chambers, and their gene expression was regulated; (e) colonized a collagen-impregnated vascular prosthesis and were able to sense mechanical forces. Our results provide an improved qualification of PDECs for vascular tissue engineering.

The role of vascular actors in two dimensional dialogue of human bone marrow stromal cell and endothelial cell for inducing self-assembled network

Angiogenesis is very important for vascularized tissue engineering. In this study, we found that a two-dimensional co-culture of human bone marrow stromal cell (HBMSC) and human umbical vein endothelial cell (HUVEC) is able to stimulate the migration of co-cultured HUVEC and induce self-assembled network formation. During this process, expression of vascular endothelial growth factor (VEGF₁₆₅) was upregulated in co-cultured HBMSC. Meanwhile, VEGF₁₆₅-receptor2 (KDR) and urokinase-type plasminogen activator (uPA) were upregulated in co-cultured HUVEC. Functional studies show that neutralization of VEGF₁₆₅ blocked the migration and the rearrangement of the cells and downregulated the expression of uPA and its receptor. Blocking of vascular endothelial-cadherin (VE-cad) did not affect the migration of co-cultured HUVEC but suppressed the self-assembled network formation. In conclusion, co-cultures upregulated the expression of VEGF₁₆₅ in co-cultured HBMSC; VEGF₁₆₅ then activated uPA in co-cultured HUVEC, which might be responsible for initiating the migration and the self-assembled network formation with the participation of VE-cad. All of these results indicated that only the direct contact of HBMSC and HUVEC and their respective dialogue are sufficient to stimulate secretion of soluble factors and to activate molecules that are critical for self-assembled network formation which show a great application potential for vascularization in tissue engineering.

Role of neural-cadherin in early osteoblastic differentiation of human bone marrow stromal cells cocultured with human umbilical vein endothelial cells

In our previous studies, roles of gap junction and vascular endothelial growth factor in the cross-talking of human bone marrow stromal cells (HBMSCs) and human umbilical vein endothelial cells (HUVECs) have been extensively studied. The present study focused on the investigation of the roles of neural (N)-cadherin in early differentiation of HBMSCs in direct-contact cocultures with HUVECs for 24 and 48 h. Quantitative real-time polymerase chain reaction, immunofluorescence, Western blot, as well as functional studies were applied to perform the studies at both protein and gene levels. Results showed that cocultured cells expressed much higher N-cadherin than monocultured cells after 24 and 48 h of culture. We observed that N-cadherin concentrated in the membrane of cocultured HBMSCs (co-HBMSCs) while distributed within the cytoplasm of monocultured HBMSCs, which indicated that the cell-cell adhesion was improved between cocultured cells. In addition, more beta-catenin was found to translocate into the cocultured cells nuclei and more T cell factor-1 (TCF-1) were detected in cocultured cells than in the monocultured cells. Moreover, mRNA levels of early osteoblastic markers including alkaline phosphatase (ALP) and type I collagen (Col-I) of co-HBMSCs were significantly upregulated, whereas neutralization of N-cadherin led to a downregulation of ALP and Col-I in both of the HBMSCs and co-HBMSCs compared with untreated cells. Taking our findings together it can be concluded that cocultures of HBMSCs with HUVECs increased N-cadherin expression and improved cell-cell adhesion. Whether this applies only to osteoprogenitor cells or to all the cell types in the culture will need to be determined by further studies. Subsequently, signaling transduction might be induced with the participation of beta-catenin and TCF-1. With the N-cadherin-mediated cell-cell adhesion and signaling transductions, the early osteoblastic differentiation of co-HBMSCs was significantly upregulated.

Laser assisted bioprinting of engineered tissue with high cell density and microscale organization

Over this decade, cell printing strategy has emerged as one of the promising approaches to organize cells in two and three dimensional engineered tissues. High resolution and high speed organization of cells are some of the key requirements for the successful fabrication of cell-containing two or three dimensional constructs. So far, none of the available cell printing technologies has shown an ability to concomitantly print cells at a cell-level resolution and at a kHz range speed. We have studied the effect of the viscosity of the bioink, laser energy, and laser printing speed on the resolution of cell printing. Accordingly, we demonstrate that a laser assisted cell printer can deposit cells with a microscale resolution, at a speed of 5 kHz and with computer assisted geometric control. We have successfully implemented such a cell printing precision to print miniaturized tissue like layouts with de novo high cell density and micro scale organization.

High-throughput laser printing of cells and biomaterials for tissue engineering

In parallel with ink-jet printing and bioplotting, biological laser printing (BioLP) using laser-induced forward transfer has emerged as an alternative method in the assembly and micropatterning of biomaterials and cells. This paper presents results of high-throughput laser printing of a biopolymer (sodium alginate), biomaterials (nano-sized hydroxyapatite (HA) synthesized by wet precipitation) and human endothelial cells (EA.hy926), thus demonstrating the interest in this technique for three-dimensional tissue construction. A rapid prototyping workstation equipped with an IR pulsed laser (tau=30 ns, lambda=1064 nm, f=1-100 kHz), galvanometric mirrors (scanning speed up to 2000 mm s(-1)) and micrometric translation stages (x, y, z) was set up. The droplet generation process was controlled by monitoring laser fluence, focalization conditions and writing speed, to take into account its mechanism, which is driven mainly by bubble dynamics. Droplets 70 microm in diameter and containing around five to seven living cells per droplet were obtained, thereby minimizing the dead volume of the hydrogel that surrounds the cells. In addition to cell transfer, the potential of using high-throughput BioLP for creating well-defined nano-sized HA patterns is demonstrated. Finally, bioprinting efficiency criteria (speed, volume, resolution, integrability) for the purpose of tissue engineering are discussed.

Polyelectrolyte multilayer films allow seeded human progenitor-derived endothelial cells to remain functional under shear stress in vitro

There is considerable interest in making multilayer films for various applications, among which are cell contacting biomaterials, allowing new opportunities to prepare functionalized biomaterials. In this study we have explored the capability of poly(sodium-4-styrene sulfonate)/poly(allylamine hydrochloride) polyelectrolyte multilayer films (PMFs) as functional coatings for human progenitor-derived endothelial cells (PDECs), since the latter are a potential source of endothelial-type cells to be used in bioartificial vascular substitutes. We performed investigations with PDECs derived from peripheral blood and characterized as endothelial cells. After forming a confluent monolayer on PMFs they were exposed to laminar pulsatile physiological shear stress. We investigated whether PDECs were able to withstand shear stress and to respond at the mRNA (microarray analysis) and protein levels (thrombomodulin and tissue factor functional activity), in comparison with collagen I and fibrin glue used as controls. After shear stress the PDECs remained spread on the substrates, with a resulting increase in the number of expressed genes. Considering the functional significance of our findings for the regulation of coagulation and fibrinolytic factors, mRNA tissue plasminogen activator and thrombomodulin, profibrinolytic and thrombin inhibiting respectively, were overexpressed in PDECs after 6h shear stress. von Willebrand factor showed down-regulation, while tissue factor was up-regulated. We can speculate that PMFs could favour anti-thrombogenic activity by PDECs because activated protein C generation, measuring thrombomodulin activity, was particularly high on PMFs, but unchanged after 6h shear stress. Thus, PMFs could represent suitable coatings able to provide functional surfaces for endothelialization with PDECs.

Biphasic calcium phosphate to repair nasal septum: the first in vitro and in vivo study

Our objective was to evaluate the cytocompatibility and biocompatibility of biphasic calcium phosphate (BCP) in the nasal respiratory airway. In vitro, the attachment rate was quantified on BCP disks with normal human epithelial cells at 1, 3 and 24 h by determining N-acetyl beta-D-hexosaminidase activity. Proliferative activity of cells was indirectly assessed by MTT assay at 3, 9, 15 and 21 days. Plastic surfaces were used as positive control. In vivo, 15 rabbits underwent anterior nasal septum perforation and 10 septa were repaired with BCP disks. Five non-implanted animals were sacrificed at 3 months. Two groups of five implanted animals were sacrificed at 1 and 2 months. The surface of new airway mucosa covering BCP disks was evaluated macroscopically. During both steps, light microscopy, immunohistochemistry and scanning electron microscopy were performed. Statistical analysis was performed with the Mann-Whitney U-test. In vitro, at 1 and 3 h, the attachment rates were significantly better than on the plastic surface (p < 10(-2)). Mitochondrial activity increased on both surfaces but began 6 days later than on plastic. After 21 days of culture, cells were confluent and formed a monolayer covering the implant even in the bottom of the pores. In vivo, no perforations in the control group closed spontaneously. The mean rate of closure was 63% in the 1 month group and 64% in the 2 month group (p > 0.05). Implants were invaded by inflammatory reaction covered by incomplete differentiated respiratory epithelium. Throughout the study, all immunohistochemical findings remained positive. These data suggest a good affinity between BCP and nasal epithelial cells. BCP could be used to rebuild nasal septa.

Absence of bone sialoprotein (BSP) impairs cortical defect repair in mouse long bone

Matrix proteins of the SIBLING family interact with bone cells and with bone mineral and are thus in a key position to regulate bone development, remodeling and repair. Within this family, bone sialoprotein (BSP) is highly expressed by osteoblasts, hypertrophic chondrocytes and osteoclasts. We recently reported that mice lacking BSP (BSP-/-) have very low trabecular bone turnover. In the present study, we set up an experimental model of bone repair by drilling a 1 mm diameter hole in the cortical bone of femurs in both BSP-/- and +/+ mice. A non-invasive MRI imaging and bone quantification procedure was designed to follow bone regeneration, and these data were extended by microCT imaging and histomorphometry on undecalcified sections for analysis at cellular level. These combined approaches revealed that the repair process as reflected in defect-refilling in the cortical area was significantly delayed in BSP-/- mice compared to +/+ mice. Concomitantly, histomorphometry showed that formation, mineralization and remodeling of repair (primary) bone in the medulla were delayed in BSP-/- mice, with lower osteoid and osteoclast surfaces at day 15. In conclusion, the absence of BSP delays bone repair at least in part by impairing both new bone formation and osteoclast activity.

Cyclo-DfKRG peptide modulates in vitro and in vivo behavior of human osteoprogenitor cells on titanium alloys

The first aim of the present study was to investigate the capacity of a cyclo-DfKRG-coated hydroxyapatite-titanium alloy (Ti-HA-RGD) to activate in vitro human osteoprogenitor cells adhesion and differentiation. The second purpose was to examine in vivo the role of a autologous cell seeding on cyclo-DfKRG-functionalized materials to provide bone repair after implantation in femoral condyle of rabbits. Our in vitro results have demonstrated that both titanium alloy functionalized with hydroxyapatite (Ti-HA-RGD and Ti-HA) contributed to higher cell adhesion than titanium alloy alone respectively 85 and 55% vs 15% compared to tissue culture polystyrene after one hour of cell seeding. As for differentiation, after 3 days of culture, Ti-HA presented the highest increase of ALP mRNA of all surfaces studied. Ti-HA-RGD showed an intermediate value about half as high as Ti-HA. Moreover after 3 days, both Ti-HA and Ti-HA-RGD surfaces showed the highest increase of cbfa1 mRNA expression. Two weeks following implantation, in vivo findings revealed that percentage of lacunae contact observed with pre-cellularized Ti-HA-RGD samples remains significantly lower than with Ti-HA group (10.5+/-9.6 % vs 33.7+/-11.5 %, P<0.03). Meanwhile, RGD peptide coating had no significant additional effect on the bone implant contact and area. Moreover, histomorphometry analysis revealed that implantation of pre-cellularized RGD coated materials with ROP cells increased significantly peri-implant fibrous area (24+/-11.6% vs 3+/-1.7% for Ti-HA-RGD, P<0.02). RGD coatings demonstrated osteoblastic adhesion, differentiation and in vivo bone regeneration at most equivalent to HA coatings.