Superlattice Calculation in an Empirical spds* Tight-Binding Model

We propose an empirical tight-binding method for tetrahedrally coordinated cubic materials and apply it to group IV and III-V semiconductors, extending existing calculations by the inclusion of all five d-orbitals per atom in the basis set. The symmetry character of the conduction states at the surface of the Brillouin zone is considerably improved compared to calculations in smaller bases, and the corresponding band positions can be obtained within the experimental uncertainties. Because the distance dependence of the tight-binding parameters is derived from deformation potentials, the model is particularly suited for an investigation of strained superlattices where the states at direct or pseudo-direct conduction band minima are composed of wavefunctions of all the minima at Γ, X, and L of the constituents. Investigations of GaAs/AlAs and short-period superlattices indicate a strong mixing between the conduction band valleys in the miniband structure, and the results are in better agreement with experiments than state-of-the-art empirical pseudopotential calculations.

Real-time changes in the optical spectrum of organic semiconducting films and their thickness regimes during growth

We present real-time in situ studies of optical spectra during thin film growth of several prototype organic semiconductors (pentacene, perfluoropentacene, and diindenoperylene) on SiO2. These data provide insight into surface and interface effects that are of fundamental importance and of relevance for applications in organic electronics. With respect to the bulk, the different molecular environment and structural changes within the first few monolayers can give rise to significant optical changes. Similar to interface-driven phenomena in, e.g., magnetism, spectral changes as a function of thickness d are a very general effect, decaying as 1/d in the simplest approximation. We observe energy shifts of 50-100 meV, rather small changes of the exciton-phonon coupling, and new transitions in specific systems, which should be considered as general features of the growth of organics.

Nanoscale spectroscopic imaging of organic semiconductor films by plasmon-polariton coupling

Tip-enhanced near-field optical images and correlated topographic images of an organic semiconductor film (diindenoperylene, DIP) on Si have been recorded with high optical contrast and high spatial resolution (17 nm) using a parabolic mirror with a high numerical aperture for tip illumination and signal collection. The DIP molecular domain boundaries being one to four molecular layers (1.5-6 nm) high are resolved topographically by a shear-force scanning tip and optically by simultaneously recording the 6x10{5} times enhanced photoluminescence (PL). The excitation is 4x10{4} times enhanced and the intrinsically weak PL-yield of the DIP-film is 15-fold enhanced by the tip. The Raman spectra indicate an upright orientation of the DIP molecules. The enhanced PL contrast results from the local film morphology via stronger coupling between the tip plasmon and the exciton-polariton in the DIP film.

Silicon nanowire oxidation: the influence of sidewall structure and gold distribution

The oxidation behavior of Si nanowires (SiNWs) grown by the gold (Au) catalyzed vapor-liquid-solid (VLS) growth process in an electron beam evaporation (EBE) reactor is studied. The VLS SiNWs exhibit hexagonal shape with essentially {112} facets where each facet shows a saw-tooth faceting itself, consisting of alternating {111} and {113} facets. Depending on growth temperatures (450-750 degrees C) and evaporation currents (40-80 mA) that determine the silicon vapor supply, this facet formation is more or less pronounced. The diffusion of Au atoms on the faceted SiNW surfaces and the formation of Au nanoparticles on the SiNW facets during growth and during ex situ annealing are studied. Upon diffusion, the Au atoms agglomerate and form Au nanoparticles that preferably arrange themselves on {113} facets. Upon annealing in air at temperatures between 800 and 950 degrees C the gold nanoparticles agglomerate further and form bigger particles of a few tens of nm in diameter that reside at the interface between the growing silica (SiO(2)) layer and the SiNW itself, which in turn shrinks during SiNW oxidation. The oxide layer thickness and the oxide appearance depend on the annealing conditions (time and temperature) and systematically varied oxidation processing is described in this paper as investigated by cross-sectional transmission electron microscopy (TEM) including high resolution studies as well as scanning electron microscopy (SEM) studies. Our results strongly suggest that the SiNWs can be fully oxidized, thus forming silica NWs that can either keep their initial shape or, under certain annealing conditions, do not keep their initial wire shape but assume a bamboo-like shape that forms most likely as a result of locally high stresses that are related to nanocrack formation. The nanocracks form in the growing oxide layer mediated by the presence of Au nanoparticles that yield gold-enhanced SiNW oxidation and thus a faster oxidation rate.

Clinical hyperthermia of prostate cancer using magnetic nanoparticles: Presentation of a new interstitial technique

The aim of this pilot study was to evaluate whether the technique of magnetic fluid hyperthermia can be used for minimally invasive treatment of prostate cancer. This paper presents the first clinical application of interstitial hyperthermia using magnetic nanoparticles in locally recurrent prostate cancer. Treatment planning was carried out using computerized tomography (CT) of the prostate. Based on the individual anatomy of the prostate and the estimated specific absorption rate (SAR) of magnetic fluids in prostatic tissue, the number and position of magnetic fluid depots required for sufficient heat deposition was calculated while rectum and urethra were spared. Nanoparticle suspensions were injected transperineally into the prostate under transrectal ultrasound and flouroscopy guidance. Treatments were delivered in the first magnetic field applicator for use in humans, using an alternating current magnetic field with a frequency of 100 kHz and variable field strength (0-18 kA m(-1)). Invasive thermometry of the prostate was carried out in the first and last of six weekly hyperthermia sessions of 60 min duration. CT-scans of the prostate were repeated following the first and last hyperthermia treatment to document magnetic nanoparticle distribution and the position of the thermometry probes in the prostate. Nanoparticles were retained in the prostate during the treatment interval of 6 weeks. Using appropriate software (AMIRA), a non-invasive estimation of temperature values in the prostate, based on intra-tumoural distribution of magnetic nanoparticles, can be performed and correlated with invasively measured intra-prostatic temperatures. Using a specially designed cooling device, treatment was well tolerated without anaesthesia. In the first patient treated, maximum and minimum intra-prostatic temperatures measured at a field strength of 4.0-5.0 kA m(-1) were 48.5 degrees C and 40.0 degrees C during the 1st treatment and 42.5 degrees C and 39.4 degrees C during the 6th treatment, respectively. These first clinical experiences prompted us to initiate a phase I study to evaluate feasibility, toxicity and quality of life during hyperthermia using magnetic nanoparticles in patients with biopsy-proven local recurrence of prostate cancer following radiotherapy with curative intent. To the authors' knowledge, this is the first report on clinical application of interstitial hyperthermia using magnetic nanoparticles in the treatment of human cancer.

Difficidin and bacilysin produced by plant-associated Bacillus amyloliquefaciens are efficient in controlling fire blight disease

Representatives of Bacillus amyloliquefaciens were shown to possess biocontrol activity against fire blight, a serious disease of orchard trees caused by Erwinia amylovora. Genome analysis of B. amyloliquefaciens FZB42 identified gene clusters responsible for synthesis of several polyketide compounds with antibacterial action. We show here that the antibacterial polyketides difficidin and to a minor extent bacillaene act efficiently against E. amylovora. Surprisingly, a mutant strain blocked in the production of difficidin (CH8 Deltadfn) inhibited growth of E. amylovora and suppressed fire blight disease nearly in the same range as the wild type. In addition, a sfp mutant (CH3 Deltasfp) unable to synthesize non-ribosomally lipopeptides and polyketides did still suppress growth of E. amylovora, suggesting that besides action of polyketides another antagonistic principle exist. A double mutant (RS06 Deltasfp Deltabac) devoid in polyketide and bacilysin synthesis was unable to suppress growth of E. amylovora indicating that the additional inhibitory effect is due to production of bacilysin, a dipeptide whose synthesis does not depend on Sfp. We propose to use B. amyloliquefaciens strains with enhanced synthesis of difficidin and/or bacilysin for development of biocontrol agents efficient against fire blight disease.

[The total ankle replacement for severe arthropathy in haemophilia]

The endoprosthetic surgery of the upper ankle joint in profound arthrosis has significantly increased over the last years. Along with the established arthodesis the alloarthroplastic became a good alternative. The main indication for the implantation of an ankle joint endoprosthesis is a secondary arthrosis in patients with rheumatic diseases or post-traumatic status. In accordance with our experience case reports on the total ankle arthroplasty in haemophilic arthropathy show that the artificial substitute of the upper ankle joint can be a successful treatment of these patients under certain conditions. The outstanding benefit is to be seen in the preservation of a sufficient mobility for everyday movements and a more physiological process of walking. In case of endoprosthetic failure a relatively save opportunity for revision in the mostly younger patients can be found in the new osteosynthesis techniques. Also in haemophilic arthropathy with painful advanced arthrosis and functional limitation of the upper ankle joint the endoprosthetic care can be taken into consideration.

Fabrication and characterization of a flow-through nanoporous gold nanowire/AAO composite membrane

The fabrication of a composite membrane of nanoporous gold nanowires and anodic aluminum oxide (AAO) is demonstrated by the electrodeposition of Au-Ag alloy nanowires into an AAO membrane, followed by selective etching of silver from the alloy nanowires. This composite membrane is advantageous for flow-through type catalytic reactions. The morphology evolution of the nanoporous gold nanowires as a function of the diameter of the Au-Ag nanowire 'precursors' is also investigated.

Enhanced surface-excitonic emission in ZnO/Al(2)O(3) core-shell nanowires

We report the influence of an Al(2)O(3) shell on the photoluminescence emission of ZnO nanowires. At room temperature, the spectrum of the core-shell nanowires shows a strong reduction of the relative intensity of the green defect emission with respect to the near-band-edge emission. At 5 K an increase of the relative intensity of the surface exciton band with respect to the donor-bound exciton emission is observed. Annealing the core-shell nanowires at 500 °C does not increase the green defect luminescence at 5 K. We propose a model explaining the spectral changes.

[Short-stemmed endoprostheses in total hip arthroplasty]

Short-stemmed endoprostheses in total hip arthroplasty are anchored exclusively in the metaphysis and the proximal part of the diaphysis. Therefore, they are much shorter than the classic standard stems. These implants are specially favourable in terms of eventual revision surgery, and also due to the fact that with close diaphyseal bone marrow spaces a sufficient proximal size dimensioning is possible. In this study, the best known short-stemmed systems in clinical use are introduced. Positive long-term results are so far available only with the Pipino and Mayo stems, short and partially medium-term experience with the remaining short stems (C.F.P.(R), Metha, PROXIMA, ESKA) are--with the available learning curve--encouraging. Despite the call for sufficient experience and scientific evaluation, short-stemmed endoprostheses already represent a valuable alternative in endoprosthetics for younger patients.

Morbidity and quality of life during thermotherapy using magnetic nanoparticles in locally recurrent prostate cancer: results of a prospective phase I trial

PURPOSE

To investigate the treatment-related morbidity and quality of life (QoL) during thermotherapy using superparamagnetic nanoparticles in patients with locally recurrent prostate cancer.

MATERIALS AND METHODS

Ten patients with biopsy-proven locally recurrent prostate cancer following primary therapy with curative intent and no detectable metastases were entered on a prospective phase I trial. Endpoints were feasibility, toxicity and QoL. Following intraprostatic injection of a nanoparticle dispersion, six thermal therapy sessions of 60 min duration were delivered at weekly intervals using an alternating magnetic field. National Cancer Institute (NCI) common toxicity criteria (CTC) and the European Organization for Research and Treatment of Cancer (EORTC) QLQ-C30 and QLQ-PR25 questionnaires were used to evaluate toxicity and QoL, respectively. In addition, prostate specific antigen (PSA) measurements were carried out.

RESULTS

Maximum temperatures up to 55 degrees C were achieved in the prostates at 25-30% of the available magnetic field strength. Nanoparticle deposits were detectable in the prostates one year after thermal therapy. At a median follow-up of 17.5 months (3-24), no systemic toxicity was observed. Acute urinary retention occurred in four patients with previous history of urethral stricture. Treatment-related morbidity was moderate and QoL was only temporarily impaired. Prostate-specific antigen (PSA) declines were observed in eight patients.

CONCLUSIONS

Interstitial heating using magnetic nanoparticles was feasible and well tolerated in patients with locally recurrent prostate cancer. Deposition of nanoparticles in the prostate was highly durable. Further refinement of the technique is necessary to allow application of higher magnetic field strengths.