Mix and match-a versatile equilibrium approach for hybrid colloidal synthesis

Colloidal synthesis is a powerful bottom-up approach for programmed self-assembly which holds promise for both research and industry. While diverse, each synthetic process is typically restricted to a specific chemistry. Many applications however require composite materials, whereas a chemical equilibrium can typically only match one material but not the other. Here, a scalable general approach is presented, alleviating the dependency on a specific chemical reaction, by resorting to a mechanical equilibrium; an isopycnic density-gradient-step is tailored to form clusters with prescribed composition. Valence control is demonstrated, making dimers, trimers, and tetramers with purity as high as 96%. The measured kinetics shows a scaleable throughput. The density gradient step plays a dual role of both filtering out undesired products and concentrating the target structures. The "Mix-and-Match" approach is general, and applies to a broad range of colloidal matter: diverse material compositions (plastics, glasses, and emulsions); a range of colloidal interactions (van der Waals, Coulomb, and DNA hybridization); and a spectrum of sizes (nanoscale to multiple micrometers). Finally, the strength of the method is displayed by producing a monodisperse suspension from a highly polydisperse emulsion. The ability to combine colloids into architectures of hybrid materials has applications in pharmaceuticals, cosmetics, and photonics.

Designing Higher Resolution Self-Assembled 3D DNA Crystals via Strand Terminus Modifications

DNA tensegrity triangles self-assemble into rhombohedral three-dimensional crystals via sticky ended cohesion. Crystals containing two-nucleotide (nt) sticky ends (GA:TC) have been reported previously, and those crystals diffracted to 4.9 Å at beamline NSLS-I-X25. Here, we analyze the effect of varying sticky end lengths and sequences as well as the impact of 5'- and 3'-phosphates on crystal formation and resolution. Tensegrity triangle motifs having 1-, 2-, 3-, and 4-nt sticky ends all form crystals. X-ray diffraction data from the same beamline reveal that the crystal resolution for a 1-nt sticky end (G:C) and a 3-nt sticky end (GAT:ATC) were 3.4 and 4.2 Å, respectively. Resolutions were determined from complete data sets in each case. We also conducted trials that examined every possible combination of 1-nucleotide and 2-nucleotide sticky-ended phosphorylated strands and successfully crystallized all 16 possible combinations of strands. We observed the position of the 5'-phosphate on either the crossover (1), helical (2), or central strand (3) affected the resolution of the self-assembled crystals for the 2-turn monomer (3.0 Å for 1-2P-3P) and 2-turn dimer sticky ended (4.1 Å for 1-2-3P) systems. We have also examined the impact of the identity of the base flanking the sticky ends as well as the use of 3'-phosphate. We conclude that crystal resolution is not a simple consequence of the thermodynamics of the direct nucleotide pairing interactions involved in molecular cohesion in this system.

Organizing End-Site-Specific SWCNTs in Specific Loci Using DNA

Single-wall carbon nanotubes (SWCNTs) are known to embody many desirable features for nanoelectronic and photonic applications, including excellent electronic and optical properties and mechanical robustness. To utilize these species in a bottom-up nanotechnological approach, it is necessary to be able to place them in precise absolute positions within a larger framework, without disturbing the conduction surface. Although it is well-known how to orient one or two nanotubes on a DNA origami, precise placement has eluded investigators previously. Here, we report a method of attaching a strand of DNA on the reactive end of a SWCNT, and then of using that DNA strand to place the nanotube at a specific site on a 2D DNA origami raft. We demonstrate that it is possible to place one or two nanotubes on such a DNA origami raft.

The PX Motif of DNA Binds Specifically to Escherichia coli DNA Polymerase I

The PX motif of DNA is a four-stranded structure in which two parallel juxtaposed double-helical domains are fused by crossovers at every point where the strands approach each other. Consequently, its twist and writhe are approximately half of those of conventional DNA. This property has been shown to relax supercoiled plasmid DNA under circumstances in which head-to-head homology exists within the plasmid; the homology can be either complete homology or every-other-half-turn homology, known as PX homology. It is clearly of interest to establish whether the cell contains proteins that interact with this unusual and possibly functional motif. We have examined Escherichia coli extracts to seek such a protein. We find by gel mobility studies that the PX motif is apparently bound by a cellular component. Fractionation of this binding activity reveals that the component is DNA polymerase I (Pol I). Although the PX motif binds to Pol I, we find that PX-DNA is not able to serve as a substrate for the extension of a shortened strand. We cannot say at this time whether the binding is a coincidence or whether it represents an activity of Pol I that is currently unknown. We have modeled the interaction of Pol I and PX-DNA using symmetry considerations and molecular dynamics.

Modulating Self-Assembly of DNA Crystals with Rationally Designed Agents

This manuscript reports a strategy for controlling the crystallization kinetics and improving the quality of engineered self-assembled 3D DNA crystals. Growing large, high-quality biomacromolecule crystals is critically important for determining the 3D structures of biomacromolecules. It often presents a great challenge to structural biologists. Herein, we introduce a rationally designed agent to modulate the crystallization process. Under such conditions, fewer, but larger, crystals that yield diffraction patterns of modestly higher resolution are produced compared with the crystals from conditions without the modulating agent. We attribute the improvement to a smaller number of nuclei and slow growth rate of crystallization. This strategy is expected to be generally applicable for crystallization of other biomacromolecules.

Paranemic Crossover DNA: There and Back Again

Over the past 35 years, DNA has been used to produce various nanometer-scale constructs, nanomechanical devices, and walkers. Construction of complex DNA nanostructures relies on the creation of rigid DNA motifs. Paranemic crossover (PX) DNA is one such motif that has played many roles in DNA nanotechnology. Specifically, PX cohesion has been used to connect topologically closed molecules, to assemble a three-dimensional object, and to create two-dimensional DNA crystals. Additionally, a sequence-dependent nanodevice based on conformational change between PX and its topoisomer, JX₂, has been used in robust nanoscale assembly lines, as a key component in a DNA transducer, and to dictate polymer assembly. Furthermore, the PX motif has recently found a new role directly in basic biology, by possibly serving as the molecular structure for double-stranded DNA homology recognition, a prominent feature of molecular biology and essential for many crucial biological processes. This review discusses the many attributes and usages of PX-DNA-its design, characteristics, applications, and potential biological relevance-and aims to accelerate the understanding of PX-DNA motif in its many roles and manifestations.

Charge splitters and charge transport junctions based on guanine quadruplexes

Self-assembling circuit elements, such as current splitters or combiners at the molecular scale, require the design of building blocks with three or more terminals. A promising material for such building blocks is DNA, wherein multiple strands can self-assemble into multi-ended junctions, and nucleobase stacks can transport charge over long distances. However, nucleobase stacking is often disrupted at junction points, hindering electric charge transport between the two terminals of the junction. Here, we show that a guanine-quadruplex (G4) motif can be used as a connector element for a multi-ended DNA junction. By attaching specific terminal groups to the motif, we demonstrate that charges can enter the structure from one terminal at one end of a three-way G4 motif, and can exit from one of two terminals at the other end with minimal carrier transport attenuation. Moreover, we study four-way G4 junction structures by performing theoretical calculations to assist in the design and optimization of these connectors.

Self-assembled three-dimensional chiral colloidal architecture

Although stereochemistry has been a central focus of the molecular sciences since Pasteur, its province has previously been restricted to the nanometric scale. We have programmed the self-assembly of micron-sized colloidal clusters with structural information stemming from a nanometric arrangement. This was done by combining DNA nanotechnology with colloidal science. Using the functional flexibility of DNA origami in conjunction with the structural rigidity of colloidal particles, we demonstrate the parallel self-assembly of three-dimensional microconstructs, evincing highly specific geometry that includes control over position, dihedral angles, and cluster chirality.

Construction of a DNA Origami Based Molecular Electro-optical Modulator

An electro-optical modulator was constructed using a DNA nanostructure scaffold with oligomers of poly(phenylenevinylene) and polyaniline. A molecular device containing one each of the functional molecules was assembled in a DNA origami. The constructs formed an "X" shape and were visualized by atomic force microscopy. In response to redox reconfiguration, the device reversibly altered fluorescence signal output. This molecular self-assembly strategy provides opportunities to make unique material composites that are difficult to achieve by blending. The strategy offers a "plug and play" format that may lead to many new functions.

Exponential growth and selection in self-replicating materials from DNA origami rafts

Self-replication and evolution under selective pressure are inherent phenomena in life, and but few artificial systems exhibit these phenomena. We have designed a system of DNA origami rafts that exponentially replicates a seed pattern, doubling the copies in each diurnal-like cycle of temperature and ultraviolet illumination, producing more than 7 million copies in 24 cycles. We demonstrate environmental selection in growing populations by incorporating pH-sensitive binding in two subpopulations. In one species, pH-sensitive triplex DNA bonds enable parent-daughter templating, while in the second species, triplex binding inhibits the formation of duplex DNA templating. At pH 5.3, the replication rate of species I is  ∼1.3-1.4 times faster than that of species II. At pH 7.8, the replication rates are reversed. When mixed together in the same vial, the progeny of species I replicate preferentially at pH 7.8; similarly at pH 5.3, the progeny of species II take over the system. This addressable selectivity should be adaptable to the selection and evolution of multi-component self-replicating materials in the nanoscopic-to-microscopic size range.

Sequential self-assembly of DNA functionalized droplets

Complex structures and devices, both natural and manmade, are often constructed sequentially. From crystallization to embryogenesis, a nucleus or seed is formed and built upon. Sequential assembly allows for initiation, signaling, and logical programming, which are necessary for making enclosed, hierarchical structures. Although biology relies on such schemes, they have not been available in materials science. Here, we demonstrate programmed sequential self-assembly of DNA functionalized emulsions. The droplets are initially inert because the grafted DNA strands are pre-hybridized in pairs. Active strands on initiator droplets then displace one of the paired strands and thus release its complement, which in turn activates the next droplet in the sequence, akin to living polymerization. Our strategy provides time and logic control during the self-assembly process, and offers a new perspective on the synthesis of materials.Natural complex systems are often constructed by sequential assembly but this is not readily available for synthetic systems. Here, the authors program the sequential self-assembly of DNA functionalized emulsions by altering the DNA grafted strands.

A device that operates within a self-assembled 3D DNA crystal

Structural DNA nanotechnology finds applications in numerous areas, but the construction of objects, 2D and 3D crystalline lattices and devices is prominent among them. Each of these components has been developed individually, and most of them have been combined in pairs. However, to date there are no reports of independent devices contained within 3D crystals. Here we report a three-state 3D device whereby we change the colour of the crystals by diffusing strands that contain dyes in or out of the crystals through the mother-liquor component of the system. Each colouring strand is designed to pair with an extended triangle strand by Watson-Crick base pairing. The arm that contains the dyes is quite flexible, but it is possible to establish the presence of the duplex proximal to the triangle by X-ray crystallography. We modelled the transition between the red and blue states through a simple kinetic model.

Construction and Structure Determination of a Three-Dimensional DNA Crystal

Structural DNA nanotechnology combines branched DNA junctions with sticky-ended cohesion to create self-assembling macromolecular architectures. One of the key goals of structural DNA nanotechnology is to construct three-dimensional (3D) crystalline lattices. Here we present a new DNA motif and a strategy that has led to the assembly of a 3D lattice. We have determined the X-ray crystal structures of two related constructs to 3.1 Å resolution using bromine-derivatized crystals. The motif we used employs a five-nucleotide repeating sequence that weaves through a series of two-turn DNA duplexes. The duplexes are tied into a layered structure that is organized and dictated by a concert of four-arm junctions; these in turn assemble into continuous arrays facilitated by sequence-specific sticky-ended cohesion. The 3D X-ray structure of these DNA crystals holds promise for the design of new structural motifs to create programmable 3D DNA lattices with atomic spatial resolution. The two arrays differ by the use of four or six repeats of the five-nucleotide units in the repeating but statistically disordered central strand. In addition, we report a 2D rhombuslike array formed from similar components.

Stabilisation of self-assembled DNA crystals by triplex-directed photo-cross-linking

Cross-linked crystals: triplex-forming oligonucleotides can direct cross-linking reactions within or between tiles of a DNA crystal, improving their thermal stability.

Topological Linkage of DNA Tiles Bonded by Paranemic Cohesion

Catenation is the process by which cyclic strands are combined like the links of a chain, whereas knotting changes the linking properties of a single strand. In the cell, topoisomerases catalyzing strand passage operations enable the knotting and catenation of DNA so that single- or double-stranded segments can be passed through each other. Here, we use a system of closed DNA structures involving a paranemic motif, called PX-DNA, to bind double strands of DNA together. These PX-cohesive closed molecules contain complementary loops whose linking by Escherichia coli topoisomerase 1 (Topo 1) leads to various types of catenated and knotted structures. We were able to obtain specific DNA topological constructs by varying the lengths of the complementary tracts between the complementary loops. The formation of the structures was analyzed by denaturing gel electrophoresis, and the various topologies of the constructs were characterized using the program Knotilus.

Covalent Linkage of One-Dimensional DNA Arrays Bonded by Paranemic Cohesion

The construction of DNA nanostructures from branched DNA motifs, or tiles, typically relies on the use of sticky-ended cohesion, owing to the specificity and programmability of DNA sequences. The stability of such constructs when unligated is restricted to a specific range of temperatures, owing to the disruption of base pairing at elevated temperatures. Paranemic (PX) cohesion was developed as an alternative to sticky ends for the cohesion of large topologically closed species that could be purified reliably on denaturing gels. However, PX cohesion is also of limited stability. In this work, we added sticky-ended interactions to PX-cohesive complexes to create interlocked complexes by functionalizing the sticky ends with psoralen, which can form cross-links between the two strands of a double helix. We were able to reinforce the stability of the constructs by creating covalent linkages between the 3'-ends and 5'-ends of the sticky ends; the sticky ends were added to double crossover domains via 3'-3' and 5'-5' linkages. Catenated arrays were obtained either by enzymatic ligation or by UV cross-linking. We have constructed finite-length one-dimensional arrays linked by interlocking loops and have positioned streptavidin-gold particles on these constructs.

The unusual and dynamic character of PX-DNA

PX-DNA is a four-stranded DNA structure that has been implicated in the recognition of homology, either continuously, or in an every-other-half-turn fashion. Some of the structural features of the molecule have been noted previously, but the structure requires further characterization. Here, we report atomic force microscopic characterization of PX molecules that contain periodically placed biotin groups, enabling the molecule to be labeled by streptavidin molecules at these sites. In comparison with conventional double stranded DNA and with antiparallel DNA double crossover molecules, it is clear that PX-DNA is a more dynamic structure. Furthermore, the spacing between the nucleotide pairs along the helix axis is shorter, suggesting a mixed B/A structure. Circular dichroism spectroscopy indicates unusual features in the PX molecule that are absent in both the molecules to which it is compared.