Advanced Ceramics Sintering Using High-Power Millimeter-Wave Radiation

The results of ceramics sintering experiments using high-power millimeter-wave radiation are reported. Sintering of silicon nitride with 5%Al2O3 and 5%Y2O3 was performed in a multi-mode applicator using a 10-kW 28-GHz gyrotron in CW operation. It was found that the silicon nitride samples sintered with 28 GHz radiation at 1650'C for 30 min reached to as high as theoretical density (TD), while the conventionally sintered samples at 1700°C for 60 min resulted in the density as low as 90% TD. Focusing experiments of millimeter-wave radiation from the high-power pulsed 60-GHz gyrotron have been performed using a quasi-optical antenna system (two-dimensional ellipso-parabolic focusing antenna system) to demonstrate the feasibility of the power density of as high as 100 kW/cm2. Typical heating characteristics using the focused beam were made clear for this system. It was found that the densification of yttria-stabilized zirconia (ZrO2-8mol%Y2O3) samples to as high as 97% TD was obtained from the sintering with focused 60 GHz beam in pulse operation with a 10-ms pulse duration at a 0.5Hz repetition. The densification temperature for the zirconia could be lowered by 200°C than that expected conventionally.

[The IC3D classification of the corneal dystrophies]

BACKGROUND

The recent availability of genetic analyses has demonstrated the shortcomings of the current phenotypic method of corneal dystrophy classification. Abnormalities in different genes can cause a single phenotype, whereas different defects in a single gene can cause different phenotypes. Some disorders termed corneal dystrophies do not appear to have a genetic basis.

PURPOSE

The purpose of this study was to develop a new classification system for corneal dystrophies, integrating up-to-date information on phenotypic description, pathologic examination, and genetic analysis.

METHODS

The International Committee for Classification of Corneal Dystrophies (IC3D) was created to devise a current and accurate nomenclature.

RESULTS

This anatomic classification continues to organize dystrophies according to the level chiefly affected. Each dystrophy has a template summarizing genetic, clinical, and pathologic information. A category number from 1 through 4 is assigned, reflecting the level of evidence supporting the existence of a given dystrophy. The most defined dystrophies belong to category 1 (a well-defined corneal dystrophy in which a gene has been mapped and identified and specific mutations are known) and the least defined belong to category 4 (a suspected dystrophy where the clinical and genetic evidence is not yet convincing). The nomenclature may be updated over time as new information regarding the dystrophies becomes available.

CONCLUSIONS

The IC3D Classification of Corneal Dystrophies is a new classification system that incorporates many aspects of the traditional definitions of corneal dystrophies with new genetic, clinical, and pathologic information. Standardized templates provide key information that includes a level of evidence for there being a corneal dystrophy. The system is user-friendly and upgradeable and can be retrieved on the website www.corneasociety.org/ic3d .

Microbial Production of Ursodeoxycholic Acid from Lithocholic Acid by Fusarium equiseti M41

A fungus identified as Fusarium equiseti was isolated from soil and found to carry out 7beta-hydroxylation of lithocholic acid to ursodeoxycholic acid (35% yield; 350 mg/liter) in 112 h.

Mechanism of variable structural colour in the neon tetra: quantitative evaluation of the Venetian blind model

The structural colour of the neon tetra is distinguishable from those of, e.g., butterfly wings and bird feathers, because it can change in response to the light intensity of the surrounding environment. This fact clearly indicates the variability of the colour-producing microstructures. It has been known that an iridophore of the neon tetra contains a few stacks of periodically arranged light-reflecting platelets, which can cause multilayer optical interference phenomena. As a mechanism of the colour variability, the Venetian blind model has been proposed, in which the light-reflecting platelets are assumed to be tilted during colour change, resulting in a variation in the spacing between the platelets. In order to quantitatively evaluate the validity of this model, we have performed a detailed optical study of a single stack of platelets inside an iridophore. In particular, we have prepared a new optical system that can simultaneously measure both the spectrum and direction of the reflected light, which are expected to be closely related to each other in the Venetian blind model. The experimental results and detailed analysis are found to quantitatively verify the model.

Effect of light irradiation on anthocyanin production by suspended culture of Perilla frutescens

After a series of experiments on photoperiodicity and light intensity under daylight supplied by an ordinary fluorescent lamp in cultivations using a flask and a roux bottle, it was found that irradiation at 27.2 W/m(2) for the whole period was effective for anthocyanin production by a suspended culture of Perilla frutescens (shiso). A high amount of anthocyanin pigments, 3.0 g/L, was obtained in a bubble column bioreactor after 10 days of cultivation at an aeration rate of 0.1 vvm with light irradiation at 27.2 W/m(2), while 2 g/L was obtained at 13.6 W/m(2) and very little at 54.4 W/m(2). A high amount of anthocyanin pigments, 2.9 g/L, was also produced using an aerated and agitated bioreactor at an agitation speed of 130 rpm, an aeration rate of 0.1 vvm and light irradiation intensity of 27.2 W/m(2). The amount of anthocyanin produced was more than twice that without light irradiation, Keeping the other cultivation conditions the same. The results obtained also showed that the amount of anthocyanin pigment accumulated in a shake flask could be rather well reproduced in bioreactors for both aerated culture, and aerated and agitated culture, by improving the conditions of light irradiation, which conspicuously affects metabolite formation.

Fibre type-specific expression patterns of myosin heavy chain genes in adult torafugu Takifugu rubripes muscles

Comprehensive in silico studies, based on the total fugu genome database, which was the first to appear in fish, revealed that torafugu Takifugu rubripes contains 20 sarcomeric myosin heavy chain (MYH) genes (MYH genes) (Ikeda et al., 2007). The present study was undertaken to identify MYH genes that would be expressed in adult muscles. In total, seven MYH genes were found by screening cDNA clone libraries constructed from fast, slow and cardiac muscles. Three MYH genes, fast-type MYH(M86-1), slow-type MYH(M8248) and slow/cardiac-type MYH(M880), were cloned exclusively from fast, slow and cardiac muscles, respectively. Northern blot hybridization substantiated their specific expression, with the exception of MYH(M880). In contrast, transcripts of fast-type MYH(M2528-1) and MYH(M1034) were found in both fast and slow muscles as revealed by cDNA clone library and northern blot techniques. This result was supported by in situ hybridization analysis using specific RNA probes, where transcripts of fast-type MYH(M2528-1) were expressed in fast fibres with small diameters as well as in fibres of superficial slow muscle with large diameters adjacent to fast muscle. Transcripts of fast-type MYH(M86-1) were expressed in all fast fibres with different diameters, whereas transcripts of slow-type MYH(M8248) were restricted to fibres with small diameters located in a superficial part of slow muscle. Interestingly, histochemical analyses showed that fast fibres with small diameters and slow fibres with large diameters both contained acid-stable myofibrillar ATPase, suggesting that these fibres have similar functions, possibly in the generation of muscle fibres irrespective of their fibre types.

Control of individual phase relationship between coupled oscillators using multilinear feedback

Due to various technological and medical demands, several methods for controlling the dynamical behavior of coupled oscillators have been developed. In the present study, we develop a method to control the individual phase relationship between coupled oscillators, in which multilinear feedback is used to modify the interaction between the oscillators. By carrying out a simulation, we show that the phase relationship can be well controlled by using the proposed method and the control is particularly robust when the target coupling function is selected properly.

Modeling of a density oscillator

A density oscillator is a well-known system, which exhibits relaxation oscillation. It alternately exhibits up and down flows through a pipe that connects two containers filled with fluids that have different densities. Although the up-flow, down-flow, and flow-reversal processes have been studied separately, the entire oscillatory dynamics has not been modeled quantitatively. In this study, we derive a model of a density oscillator by considering all the above mentioned processes. The model thus obtained describes the oscillatory behavior in a unified manner, and its viscosity and pipe-length dependence is well described. Moreover, for the demonstration of this model, we have extended it to describe the dynamical behaviors observed in coupled density oscillators. Thus, this model provides a general expression for density oscillators.

The variation in transparency of amniotic membrane used in ocular surface regeneration

BACKGROUND/AIMS

Scant consideration has been given to the variation in structure of the human amniotic membrane (AM) at source or to the significance such differences might have on its clinical transparency. Therefore, we applied our experience of quantifying corneal transparency to AM.

METHODS

Following elective caesarean, AM from areas of the fetal sac distal and proximal (ie, adjacent) to the placenta was compared with freeze-dried AM. The transmission of light through the AM samples was quantified spectrophotometrically; also, tissue thickness was measured by light microscopy and refractive index by refractometry.

RESULTS

Freeze-dried and freeze-thawed AM samples distal and proximal to the placenta differed significantly in thickness, percentage transmission of visible light and refractive index. The thinnest tissue (freeze-dried AM) had the highest transmission spectra. The thickest tissue (freeze-thawed AM proximal to the placenta) had the highest refractive index. Using the direct summation of fields method to predict transparency from an equivalent thickness of corneal tissue, AM was found to be up to 85% as transparent as human cornea.

CONCLUSION

When preparing AM for ocular surface reconstruction within the visual field, consideration should be given to its original location from within the fetal sac and its method of preservation, as either can influence corneal transparency.

Identification of a novel HLA-B allele, HLA-B*5904

The new human leukocyte antigen (HLA) class I allele, HLA-B*5904 was identified in Japanese individual. HLA-B*5904 differs from HLA-B*5901 by two non-synonymous nucleotide exchanges at codon 163 (ACG to CTG).

Tachycardia-dependent right bundle-branch block with supernormal conduction

This paper reports the case of a 76-year-old man in whom atrial flutter with varying atrioventricular block and intermittent right bundle-branch block was found. This is the first report on tachycardia-dependent right bundle-branch block associated with supernormal conduction in a case of atrial flutter. When an impulse is conducted to the ventricles beyond 0.72 s after a QRS complex of right bundle-branch block configuration, the impulse falls after the abnormally long effective refractor period of the right bundle branch and passes through the right bundle branch. When the conducted impulse occurs within 0.72 s after a QRS complex of right bundle-branch block configuration, the impulse usually falls in the refractory period and is blocked in the right bundle branch; however, only when the impulse occurs 0.48 or 0.49 s after that does it fall in the supernormal period and passes through the right bundle branch. The findings in the present report strengthen our previous suggestion that the presence of supernormal conduction plays an important role in the initiation of reentrant ventricular tachycardia.

Method to control the coupling function using multilinear feedback

Methods to control the dynamics of coupled oscillators have been developed owing to various medical and technological demands. In this study, we develop a method to control coupled oscillators in which the coupling function expressed in a phase model is regulated by the multilinear feedback. The present method has wide applicability because we do not need to measure an individual output from each oscillator, but only measure the sum of the outputs from all the oscillators. Moreover, it allows us to easily control the coupling function up to higher harmonics. The validity of the present method is confirmed through a simulation.

Association of Fas Ligand gene polymorphism with Stevens-Johnson syndrome

BACKGROUND

Stevens-Johnson syndrome (SJS) and toxic epidermal necrolysis (TEN) are acute severe blistering diseases of the skin and also two of the most devastating ocular surface diseases leading to corneal damage and loss of vision. The extreme rarity of cutaneous and ocular surface reactions to drug therapies led us to suspect individual susceptibility. SJS/TEN patients in the acute stage were reported to manifest increased serum levels of Fas Ligand (FasL). Thus, we performed SNP association analysis of the FasL gene.

METHODS

In 76 Japanese SJS/TEN patients with ocular surface complications and 160 Japanese healthy controls, we examined four SNPs of FasL reported in the Japanese Single Nucleotide Polymorphisms (JSNP) database by sequencing.

RESULTS

The SNP rs.3830150 A/G showed a significant strong inverse association with SJS/TEN. Analysis of the genotype pattern of SNPs rs.3830150 and rs.2639614 (rs.3830150 A/A-rs.2639614 G/G) also manifested a strong inverse association with SJS/TEN.

CONCLUSION

FasL gene polymorphisms might be associated with SJS/TEN.