Instant loading with intraoral welding technique and PRAMA implants: a new prosthetic approach

When splinting multiple implants passive fit of the framework should be achieved to avoid excessive force distribution on the implants. Recently, a protocol was suggested for immediate loading of multiple implants by welding a titanium bar to implant abutments directly in the oral cavity so as to create a customized, precise and passive metal-reinforced provisional restoration. The intraoral welding technique subsequently proves to be a successful option in the full-arch immediate restorations of the mandible and maxilla. The aim of this article is to present a case report in which a new prosthetic approach, using trans-mucosal implants, is described. Dental implants are instantly loaded with a provisional prosthesis supported by an intraoral welded titanium framework to obtain a precise passive fit of the immediate loaded prosthesis.

Biomechanical considerations on macromorphology of endosseous dental implants

The aim of the present study is to define the optimal thread form and why the macroscopic shape of the dental intra-osseous implant interacts with the biological environment thus conditioning its lifespan and long-term success.

Static and fatigue resistance of two types of implant/abutment connectors

The aim of this study is to determine in an experimental way through mechanical tests the static, fatigue and torque resistance of two types of implant/abutment connectors with diameters of 3.4–5.2 mm.

An overview to nano-scale analytical techniques: Nano-liquid chromatography and capillary electrochromatography

Nano-liquid chromatography (nano-LC) and CEC are microfluidic techniques mainly used for analytical purposes. They have been applied to the separation and analysis of a large number of compounds, e.g., peptides, proteins, drugs, enantiomers, antibiotics, pesticides, nutraceutical, etc. Analytes separation is carried out into capillaries containing selected stationary phase. The mobile phase is moved either by a pump (nano-LC) or by an EOF, respectively. The two tools can offer some advantages over conventional techniques, e.g., high selectivity, separation efficiency, resolution, short analysis time and consumption of low volumes of mobile phase. Flow rates in the range 50-800 nL/min are usually applied. The low flow rate reduces the chromatographic dilution increasing the mass sensitivity. Special attention must be paid in avoiding peak dispersion selecting the appropriate detector, injector and tube connection. Finally due to the low flow rate these microfluidic techniques can be easily coupled with mass spectrometry.

Rapid determination of nucleotides in infant formula by means of nano-liquid chromatography

A rapid method for the quantification of five ribonucleotides 5'- monophophates (adenosine, cytidine, guanosine, inosine, uridine, 5'-monophosphate), in infant formula, has been proposed using nano-LC. To separate the studied compounds, capillary columns packed with different C18-based stationary phases were investigated. All the columns tested were laboratory prepared. The experiments were performed in ion-pairing RP chromatographic mode using tetrabutylammonium hydroxide as ion-pairing reagent. The method was developed using a core-shell XB-C18 capillary column with a mobile phase consisting of 5% v/v methanol and 95% v/v 100 mM ammonium formate, pH 8, containing 20 mM tetrabutylammonium hydroxide. All compounds were baseline resolved in less than 5 min with a flow rate of 500 nL/min in isocratic elution mode. Nucleotides were detected at 260 nm. Analytical validation parameters were evaluated. The RSD values for intraday and interday repeatability for retention time and peak area were <2.4 and 4.2%, respectively. The method linearity was good (R(2) < 0.9995) for the studied compounds. LOD and limit of quantitation were 0.25 and 0.50 μg/mL, respectively. The method was applied to the determination of nucleotides in infant formula, subjected to a centrifugal ultrafiltration process, prior their analysis. The amounts found were in agreement to the labeled contents.

Capillary electrochromatography-mass spectrometry for the determination of 5-nitroimidazole antibiotics in urine samples

The separation of eight antibiotics belonging to 5-nitroimidazole family was carried out by means of CEC coupled with MS. Preliminary experiments were carried out with ultraviolet detection in order to select the proper stationary and mobile phase. Among the different stationary phases studied (namely Lichrospher C18, 5 μm particle size; Cogent(TM) Bidentate C18, 4.2 μm; Pinnacle II™ Phenyl, 3 μm; Pinnacle II™ Cyano, 3 μm), Cogent™ Bidentate C18 (4.2 μm) gave the best performance. For CEC-MS coupling, a laboratory assembled liquid-junction-nano-spray interface was used. In order to achieve a good sensitivity, special attention was paid to both optimization of the sheath liquid composition as well as selection of the injection mode. Under optimized CEC-ESI-MS conditions, the separation was accomplished within 22 min by using a column packed with a mixture of Bidentate C18:Lichrospher Silica-60 (5 μm) 3:1 w/w, an inlet pressure of 11 bar, a voltage of 15 kV, and a mobile phase composed by 45:10:45 v/v/v ACN/MeOH/water containing ammonium acetate (5 mM pH 5). A combined hydrodynamic and electrokinetic injection of 8 bar, 15 kV, and 96 s was adopted. The method was validated in terms of repeatability and intermediate precision of retention times and peak areas, linearity, and LODs and LOQs. RSDs values were <2.9% for retention times and <16.1% for peak areas in both intraday and interday experiments. LOQ values were between 0.09 and 0.42 μg/mL for all compounds. Finally, the method was applied to the determination of three most employed 5-nitroimidazole antibiotics (metronidazole, secnidazole, and ternidazole) in spiked urine samples, subjected to a SPE procedure. Recovery values in the 67-103% range were obtained. Furthermore, for the selected antibiotics, CEC-MS(2) spectra were obtained providing the unambiguous confirmation of these drugs in urine samples.