Growth, structural, vibrational, optical, laser and dielectric aspects of L-alanine alaninium nitrate single crystal

Bulk single crystals of l-alanine alaninium nitrate [abbreviated as LAAN], an intriguing material for frequency conversion has been grown from its aqueous solution by both slow solvent evaporation and by slow cooling techniques. The optimized pH value to grow good quality LAAN single crystal was found to be 2.5. The grown crystals were subjected to single crystal X-ray diffraction studies to determine the unit cell dimensions and morphology. Vibrational frequencies of the grown crystals by Fourier transform infrared spectroscopic technique were investigated. Also, the presence of hydrogen and carbon atoms in the grown sample was confirmed using proton and carbon NMR analyses. The dielectric constant and dielectric loss measurements of the as grown crystal at different temperatures and frequencies of the applied field are measured and reported. LAAN has good optical transmission in the entire visible region with cutoff wavelength within the UV region confirms its suitability for device fabrications. The existence of second harmonic generation signals was observed using Nd:YAG laser with fundamental wavelength of 1064 nm. Its Laser Damage Threshold (LDT) was measured and also tested by using a Q-switched Nd:YAG laser and the value of LDT of LAAN is 17.76GW/cm2 respectively, is found to be better than certain organic and semiorganic materials.

Composition driven monolayer to bilayer transformation in a surfactant intercalated Mg-Al layered double hydroxide

The structure and organization of dodecyl sulfate (DDS) surfactant chains intercalated in an Mg-Al layered double hydroxide (LDH), Mg(1-x)Alx(OH)2, with differing Al/Mg ratios has been investigated. The Mg-Al LDHs can be prepared over a range of compositions with x varying from 0.167 to 0.37 and therefore provides a simple system to study how the organization of the alkyl chains of the intercalated DDS anions change with packing density; the Al/Mg ratio or x providing a convenient handle to do so. Powder X-ray diffraction measurements showed that at high packing densities (x ≥ 0.3) the alkyl chains of the intercalated dodecyl sulfate ions are anchored on opposing LDH sheets and arranged as bilayers with an interlayer spacing of ∼27 Å. At lower packing densities (x < 0.2) the surfactant chains form a monolayer with the alkyl chains oriented flat in the galleries with an interlayer spacing of ∼8 Å. For the in between compositions, 0.2 ≤ x < 0.3, the material is biphasic. MD simulations were performed to understand how the anchoring density of the intercalated surfactant chains in the Mg-Al LDH-DDS affects the organization of the chains and the interlayer spacing. The simulations are able to reproduce the composition driven monolayer to bilayer transformation in the arrangement of the intercalated surfactant chains and in addition provide insights into the factors that decide the arrangement of the surfactant chains in the two situations. In the bilayer arrangement, it is the dispersive van der Waals interactions between chains in opposing layers of the anchored bilayer that is responsible for the cohesive energy of the solid whereas at lower packing densities, where a monolayer arrangement is favored, Coulomb interactions between the positively charged Mg-Al LDH sheets and the negatively charged headgroup of the DDS anion dominate.

Application of water quality index for groundwater quality assessment: Thirumanimuttar sub-basin, Tamilnadu, India

An attempt has been made to understand the hydrogeochemical parameters to develop water quality index in Thirumanimuttar sub-basin. A total of 148 groundwater samples were collected and analyzed for major cations and anions. The domination of cations and anions was in the order of Na>Mg>Ca>K for cations and Cl>HCO(3) >SO(4) in anions. The hydrogeochemical facies indicate alkalis (Na and K) exceed alkaline earths (Ca and Mg) and strong acids (Cl and SO(4)) exceed weak acid (HCO(3)). Water quality index rating was calculated to quantify overall water quality for human consumption. The PRM samples exhibit poor quality in greater percentage when compared with POM due to effective leaching of ions, over exploitation of groundwater, direct discharge of effluents and agricultural impact. The overlay of WQI with chloride and EC correspond to the same locations indicating the poor quality of groundwater in the study area. SAR, Na%, and TH were noted higher during both the seasons indicating most of the groundwater locations not suitable for irrigation purposes.

Mixed Saturated−Unsaturated Alkyl-Chain Assemblies: Solid Solutions of Zinc Stearate and Zinc Oleate

The linear saturated stearic acid and the bent mono-unsaturated oleic acid do not mix and form solid solutions. However, the zinc salts of these acids can. From X-ray diffraction and DSC measurements we show that the layered zinc stearate and zinc oleate salts form a homogeneous solid solution at all composition ratios. The solid solutions exhibit a single melting endotherm, with the melting temperature varying linearly with composition but with the enthalpy change showing a minimum. By monitoring features in the infrared spectra that are characteristic of the global conformation of the hydrocarbon chain, and hence can distinguish between stearate and oleate chains, it is shown that solid solution formation is realized by the introduction of gauche defects in a fraction of the stearate chains that are then no longer linear. This fraction increases with oleate concentration. It has also been possible from the spectroscopic measurements to establish a quantitative relation between molecular conformational order and the thermodynamic enthalpy of melting of the solid solutions.

Melting of Saturated Fatty Acid Zinc Soaps

The melting of alkyl chains in the saturated fatty acid zinc soaps of different chain lengths, Zn(C(n)H(2n+1)COO)(2); n = 11, 13, 15, and 17, have been investigated by powder X-ray diffraction, differential scanning calorimetry, and vibrational spectroscopy. These compounds have a layer structure with the alkyl chains arranged as tilted bilayers and with all methylene chains adopting a planar, all-trans conformation at room temperature. The saturated fatty acid zinc soaps exhibit a single reversible melting transition with the associated enthalpy change varying linearly with alkyl chain length, but surprisingly, the melting temperature remaining constant. Melting is associated with changes in the conformation of the alkyl chains and in the nature of coordination of the fatty acid to zinc. By monitoring features in the infrared spectra that are characteristic of the global conformation of the alkyl chains, a quantitative relation between conformational disorder and melting is established. It is found that, irrespective of the alkyl chain length, melting occurs when 30% of the chains in the soap are disordered. These results highlight the universal nature of the melting of saturated fatty acid zinc soaps and provide a simple explanation for the observed phenomena.

Contrasting melting behavior of zinc stearate and zinc oleate

The influence of a double bond in the middle of an otherwise flexible hydrocarbon chain on the melting of such assemblies has been investigated by comparing the melting behavior of zinc stearate and zinc oleate. By monitoring features in the infrared spectra that are characteristic of the global conformation of the hydrocarbon chain, it is shown that the double bond effectively decouples the thermal evolution of conformational disorder in the chain segments on either side of the double bond and the melting of each of these segments in the assembly occurs as independent events.

Aromatic Molecules in Restricted Geometries: Pyrene Excimer Formation in an Anchored Bilayer

The galleries of an anionic clay, Mg-Al Layered Double Hydroxide (Mg-Al LDH) have been functionalized by intercalating the anionic surfactant do-decyl sulfate. Within the galleries, the alkyl chains of the surfactant adopt a bilayer structure with the sulfate headgroup anchored to the inorganic sheet. Pyrene molecules have been solubilized in the anchored bilayer by partitioning from polar solvents. The presence of pyrene molecules induces conformational disorder in the alkyl chains of the bilayer and more importantly inhibits the rotational disordering motion of the sulfate headgroup. Pyrene fluorescence indicates formation of excimers whose intensity increases with concentration of solubilized pyrene indicating that they are mobile. Pyrene solubilized in the anchored bilayer exhibits unusual phenomena; on evacuation the excimer band disappear but reappears on releasing vacuum. It is shown that this behavior arises due to the loss of water of hydration of the headgroup on evacuation and as a consequence the pyrene moves into the less polar interior of the bilayer where it is immobile and can no longer diffuse and form excimers. The motion of pyrene into the interior of the bilayer creates free space near the surfactant chain termini, which manifests in the disappearance of the methyl-rocking mode of the ordered (-tt) end-chain conformer in the Raman spectra.

Plant-based formulation in the management of chronic obstructive pulmonary disease: a randomized double-blind study

BACKGROUND

A randomized double-blind placebo controlled clinical study was undertaken to investigate the safety and efficacy of a plant-based formulation (DCBT1234-Lung KR), which earlier through 2 trials was found to improve FEV1 and the quality of life of COPD patients.

OBJECTIVE

The efficacy of DCBT1234-Lung KR was assessed using pulmonary function tests, arterial blood gas (ABG) analyses and the clinical symptoms of COPD in a 6-month study period against a matching placebo and a biomedical drug combination (salbutamol+theophylline+bromhexine).

METHODS

One hundred and five subjects aged between 35 and 85 years with a smoking history of more than 20 pack years, showing little or no improvement in FEV1 upon a bronchial challenge of 200 microg of inhaled salbutamol and exhibiting ABG percentage of less than 85% of oxygen saturation were taken up for the study. The study had 3 arms viz., the plant-based formulation (DCBT1234-Lung KR), placebo and salbutamol (12 mg/day) plus theophylline (300 mg/day) plus bromhexine (24 mg/day). The end point of the study was determined as an improvement of FEV1 by 200 mL and/or increased ABG values (>90% PaO2) and clinical symptoms like dyspnoea, wheezing, cough, expectoration, disability, and sleep disturbances.

RESULTS

DCBT1234-Lung KR patients showed statistically significant (95% level) improvement in FEV1 and PaO2 in comparison with salbutamol+theophylline+bromhexine and placebo patients. Twenty-three per cent of DCBT1234-Lung KR patients, 19% of salbutamol+theophylline+bromhexine group and 12% of placebo group patients showed the desired 200 mL improvement in FEV1 values in comparison with the other 2 arms. Improved PaO2 was observed in 15.4% of the DCBT1234-Lung KR patients while no improvement was seen with patients in any other arms. Symptoms like dyspnoea, wheezing, cough, expectoration, disability and sleep disturbances also significantly reduced in DCBT1234-Lung KR and the biomedical group patients, but not in the placebo arm.

CONCLUSIONS

DCBT1234-Lung KR was equivalent, if not better than the present day treatment with salbutamol, theophylline and bromhexine combination in COPD patients and this was ascertained using FEV1 and ABG values.

Structure of a cyclodextrin functionalized anionic clay: XRD analysis, spectroscopy, and computer simulations

Carboxy-methyl beta-cyclodextrin (CMCD) cavities have been intercalated within the galleries of anionic clay, Mg-Al layered double hydroxide (LDH). The cyclodextrin functionalized LDH has been reported to adsorb neutral and nonpolar guest molecules. X-ray diffraction, IR, and Raman vibrational spectroscopy and (13)C CPMAS NMR have been used to characterize the confined CMCD molecules, whereas molecular dynamics simulations have been used to probe the interlayer arrangement and orientation of the intercalated species. Spectroscopic measurements as well as MD simulations show that there is no significant change in the geometry of the CMCD cavity on intercalation. Within the galleries of the anionic clay, the CMCD anions are arranged as bilayers with the carboxy methyl substituents, located at the narrower opening of the bucket-like cyclodextrin toroid, anchored to the LDH sheet. This arrangement leaves the wider opening of the CMCD anion facing away from the layers allowing the interior of the cyclodextrin cavity to be accessible to guest molecules. Finally, the hydrophobicity of the anchored cyclodextrin cavity has been characterized using fluorescence from pyrene included within it.

Aromatic Molecules in Restricted Geometries: Photophysics of Naphthalene Included in a Cyclodextrin Functionalized Layered Solid

The galleries of an Mg-Al layered double hydroxide have been functionalized by intercalation of carboxymethyl beta-cyclodextrin cavities. The anchored cavities form a random array of identical-sized hydrophobic nanopockets arranged in a bilayer fashion in the interlamellar space of the layered solid. Naphthalene molecules have been included within these cavities by partitioning from a polar solvent. The fluorescence from the included naphthalene shows an unusual behavior--the excimer to monomer emission intensity decreases with increasing concentration of included naphthalene. This is shown to be a consequence of the absence of translational mobility of the naphthalene--cyclodextrin adduct in the functionalized solid. Two types of included naphthalene have been identified: a preformed excimer-like species characterized by the absence of rise time in decay measurements and a monomeric species that is incapable of excimer formation due to the absence of suitably located included naphthalenes in its proximity. The concentration of each species and the enthalpy for excimer formation have been determined from the temperature variation of fluorescence intensities.

Anionic Clays Containing Anti-Inflammatory Drug Molecules: Comparison of Molecular Dynamics Simulation and Measurements

Three representative nonsteroidal anti-inflammatory drug molecules, Ibuprofen, Diclofenac, and Indomethacin, have been intercalated within the galleries of an anionic clay, Mg-Al layered double hydroxide (LDH). X-ray diffraction, IR and Raman vibrational spectroscopy and (13)C cross-polarization magic-angle spinning NMR have been used to characterize the confined drug molecules, while molecular dynamics (MD) simulations were used to probe the interlayer structure, arrangement, orientation, and geometry of the intercalated species. All three drug molecules are arranged as bilayers in the interlamellar space of the anionic clay. But while the structure of the intercalated Ibuprofen is identical to that of the molecule outside the layers, spectroscopy as well as MD simulation shows that there is a change in the geometry of Diclofenac and Indomethacin upon confinement within the galleries of the LDH. The change in geometry of Diclofenac and Indomethacin upon intercalation is shown to originate from the electrostatic interaction between the electronegative chlorine atoms on the drug molecule and the positively charged metal hydroxide sheets of the anionic clay. It is shown that these changes in the geometry of the intercalated drug molecules allow for the observed interlayer spacing to be realized without the bilayers having to interdigitate, which would otherwise have been necessary if the structure of the drug molecules had remained identical to that outside the layers. Comparisons of experimental measurements with simulation have provided a more detailed understanding of the geometry and organization of flexible drug molecules confined in the anionic clay.

Adsorption of n-Hexane in Zeolite-5A: A Temperature-Programmed Desorption and IR-Spectroscopic Study

The adsorption and desorption of n-hexane over Zeolite-5A has been investigated as a function of loading using simultaneous Fourier transform infrared (FTIR)-temperature-programmed desorption (TPD) measurements. The TPD profiles show a second peak developing at lower temperatures when loading exceeds 16 hexane molecules per Zeolite-5A unit cell or two molecules per alpha-cavity of the Zeolite-5A structure. The infrared spectra rule out two types of adsorption sites as the origin of the two peaks in the TPD. Changes in the conformation of the adsorbed hexane as a function of loading and temperature were followed by monitoring the position of the methylene stretching modes in the infrared spectra. With increasing loading, the adsorbed hexane adopts a stretched trans conformation. These changes occur at loading levels below 12 hexane molecules per Zeolite-5A unit cell. No change is observed above this loading, ruling out any conformational change at loadings where the second peak is seen in the TPD. The second peak in the TPD arises, therefore, from a combination of steric repulsion and loss of translational entropy.

Orientational Dynamics of Anthracene in a Cyclodextrin Functionalized Layered Solid

Cyclodextrin cavities have been intercalated in a layered metal hydroxide to create hydrophobic nanopockets within the galleries of the layered solid. Anthracene molecules have been included in the anchored cavities by partitioning from a polar solvent. The excitation-emission fluorescence spectra of the included anthracene show a total absence of Stokes shift. The orientational dynamics of the isolated, solvent-free anthracene molecules in the anchored cyclodextrin cavities have been probed by fluorescence anisotropy decay measurements. The results have been compared with those for anthracene included in cyclodextrin cavities in aqueous solutions.

Inclusion of Ferrocene in a Cyclodextrin-Functionalized Layered Metal Hydroxide: A New Organometallic−Organic−LDH Nanohybrid

Cyclodextrin cavities have been grafted into a layered metal hydroxide to create hydrophobic nanopockets within the galleries of the inorganic solid. Neutral ferrocene molecules can be included within the grafted cavities by partitioning from a polar solvent to generate a new organometallic-organic-inorganic hybrid. The included ferrocene has been characterized by electronic and Raman spectroscopy. The capability of the cyclodextrin-functionalized solid to separate hydrophobic and hydrophilic derivatives of ferrocene is demonstrated.

Insertion of Iodine in a Functionalized Inorganic Layered Solid

The galleries of a Mg-Al layered double hydroxide have been functionalized by intercalation of (carboxymethyl)-beta-cyclodextrin cavities. The functionalized inorganic solid can adsorb iodine molecules from vapor as well as nonaqueous and aqueous solutions. The adsorbed iodine complexes with the grafted cyclodextrin cavities, disassociating heterolytically to form polyiodide species. Electronic and Raman spectra provide conclusive evidence for the existence of linear symmetric triodide, I(3)(-), and pentaiodide, I(5)(-), species within the cyclodextrin cavities confined in the layered double hydroxide.

Sphingomyelin-cholesterol domains in phospholipid membranes: atomistic simulation

We have carried out an atomic-level molecular dynamics simulation of a system of nanoscopic size containing a domain of 18:0 sphingomyelin and cholesterol embedded in a fully hydrated dioleylposphatidylcholine (DOPC) bilayer. To analyze the interaction between the domain and the surrounding phospholipid, we calculate order parameters and area per molecule as a function of molecule type and proximity to the domain. We propose an algorithm based on Voronoi tessellation for the calculation of the area per molecule of various constituents in this ternary mixture. The calculated areas per sphingomyelin and cholesterol are in agreement with previous simulations. The simulation reveals that the presence of the liquid-ordered domain changes the packing properties of DOPC bilayer at a distance as large as approximately 8 nm. We calculate electron density profiles and also calculate the difference in the thickness between the domain and the surrounding DOPC bilayer. The calculated difference in thickness is consistent with data obtained in atomic force microscopy experiments.