Complete structural characterization of single carbon nanotubes by Rayleigh scattering circular dichroism

Non-invasive, high-throughput spectroscopic techniques can identify chiral indices (n,m) of carbon nanotubes down to the single-tube level^1-6. Yet, for complete characterization and to unlock full functionality, the handedness, the structural property associated with mirror symmetry breaking, also needs to be identified accurately and efficiently^7-14. So far, optical methods fail in the handedness characterization of single nanotubes because of the extremely weak chiroptical signals (roughly 10^-7) compared with the excitation light^15,16. Here we demonstrate the complete structure identification of single nanotubes in terms of both chiral indices and handedness by Rayleigh scattering circular dichroism. Our method is based on the background-free feature of Rayleigh scattering collected at an oblique angle, which enhances the nanotube's chiroptical signal by three to four orders of magnitude compared with conventional absorption circular dichroism. We measured a total of 30 single-walled carbon nanotubes including both semiconducting and metallic nanotubes and found that their absolute chiroptical signals show a distinct structure dependence, which can be qualitatively understood through tight-binding calculations. Our strategy enables the exploration of handedness-related functionality of single nanotubes and provides a facile platform for chiral discrimination and chiral device exploration at the level of individual nanomaterials.

Nanotube-Based 1D Heterostructures Coupled by van der Waals Forces

1D van der Waals heterostructures based on carbon nanotube templates are raising a lot of excitement due to the possibility of creating new optical and electronic properties, by either confining molecules inside their hollow core or by adding layers on the outside of the nanotube. In contrast to their 2D analogs, where the number of layers, atomic type and relative orientation of the constituting layers are the main parameters defining physical properties, 1D heterostructures provide an additional degree of freedom, i.e., their specific diameter and chiral structure, for engineering their characteristics. The current state-of-the-art in synthesizing 1D heterostructures are discussed here, in particular focusing on their resulting optical properties, and details the vast parameter space that can be used to design heterostructures with custom-built properties that can be integrated into a large variety of applications. First, the effects of van der Waals coupling on the properties of the simplest and best-studied 1D heterostructure, namely a double-walled carbon nanotube, are described, and then heterostructures built from the inside and the outside are considered, which all use a nanotube as a template, and, finally, an outlook is provided for the future of this research field.

Tailoring Highly Ordered Graphene Framework in Epoxy for High-Performance Polymer-Based Heat Dissipation Plates

As the power density and integration level of electronic devices increase, there are growing demands to improve the thermal conductivity of polymers for addressing the thermal management issues. On the basis of the ultrahigh intrinsic thermal conductivity, graphene has exhibited great potential as reinforcing fillers to develop polymer composites, but the resultant thermal conductivity of reported graphene-based composites is still limited. Here, an interconnected and highly ordered graphene framework (HOGF) composed of high-quality and horizontally aligned graphene sheets was developed by a porous film-templated assembly strategy, followed by a stress-induced orientation process and graphitization post-treatment. After embedding into the epoxy (EP), the HOGF/EP composite (24.7 vol %) exhibits a record-high in-plane thermal conductivity of 117 W m^-1 K^-1, equivalent to ≈616 times higher than that of neat epoxy. This thermal conductivity enhancement is mainly because the HOGF as a filler concurrently has high intrinsic thermal conductivity, relatively high density, and a highly ordered structure, constructing superefficient phonon transport paths in the epoxy matrix. Additionally, the use of our HOGF/EP as a heat dissipation plate was demonstrated, and it achieved 75% enhancement in practical thermal management performance compared to that of conventional alumina for cooling the high-power LED.

Multi-Walled Carbon Nanotube-Assisted Encapsulation Approach for Stable Perovskite Solar Cells

Perovskite solar cells (PSCs) are regarded as the next-generation thin-film energy harvester, owing to their high performance. However, there is a lack of studies on their encapsulation technology, which is critical for resolving their shortcomings, such as their degradation by oxygen and moisture. It is determined that the moisture intrusion and the heat trapped within the encapsulating cover glass of PSCs influenced the operating stability of the devices. Therefore, we improved the moisture and oxygen barrier ability and heat releasing capability in the passivation of PSCs by adding multi-walled carbon nanotubes to the epoxy resin used for encapsulation. The 0.5 wt% of carbon nanotube-added resin-based encapsulated PSCs exhibited a more stable operation with a ca. 30% efficiency decrease compared to the ca. 63% decrease in the reference devices over one week under continuous operation. Specifically, the short-circuit current density and the fill factor, which are affected by moisture and oxygen-driven degradation, as well as the open-circuit voltage, which is affected by thermal damage, were higher for the multi-walled carbon nanotube-added encapsulated devices than the control devices, after the stability test.

Controlled Doping Engineering in 2D MoS2 Crystals toward Performance Augmentation of Optoelectronic Devices

Doping engineering of two-dimensional (2D) semiconductors is vital for expanding their device applications, but has been limited by the inhomogeneous distribution of doping atoms in such an ultrathin thickness. Here, we report the controlled doping of Sn heteroatoms into 2D MoS₂ crystals through a single-step deposition method to improve the photodetection ability of MoS₂ flakes, whereas the host lattice has been well reserved without the random aggregation of the introduced atoms. Atomic-resolution and spectroscopic characterizations provide direct evidence that Sn atoms have been substitutionally doped at Mo sites in the MoS₂ lattice and the Sn dopant leads to an additional strain in the host lattice. The detection performance of Sn-doped MoS₂ flakes exhibits an order of magnitude improvement (up to R_λ ≈ 29 A/W, EQE ≈ 7.8 × 10³%, D* ≈ 10¹¹ Jones@470 nm) as compared with that of pure MoS₂ flakes, which is associated with electrons released from Sn atoms. Such a substitutional doping process in TMDs provides a potential platform to tune the on-demand properties of these 2D materials.

Controlled Removal of Surfactants from Double-Walled Carbon Nanotubes for Stronger p-Doping Effect and Its Demonstration in Perovskite Solar Cells

Double-walled carbon nanotubes (DWNTs) have shown potential as promising alternatives to conventional transparent electrodes owing to their solution processability as well as high conductivity and transparency. However, their DC to optical conductivity ratio is limited by the surrounding surfactants that prevent the p-doping of the DWNTs. To maximize the doping effectiveness, the surfactants are removed from the DWNTs, with negligible damage to the nanotubes, by calcination in an Ar atmosphere. The effective removal of the surfactants is characterized by various analyses, and the results show that the optimal calcination temperature is 400 °C. The conductivity of the DWNTs films improves when doped by triflic acid. While the conductivity increase of the surfactants-wrapped DWNT films is 31.9%, the conductivity increase of the surfactants-removed DWNT is found to be 59.7%. Using the surfactants-removed, p-doped, solution-processed transparent electrodes, inverted-type perovskite solar cells are fabricated, resulting in a power conversion efficiency of 17.7% without hysteresis. This work advances the application of DWNTs in transparent conductors, as the efficiency obtained is the highest value achieved to date for carbon nanotube electrode-based perovskite solar cells and solution-processable transparent electrode-based solar cells.

Photoluminescence from Single-Walled MoS2 Nanotubes Coaxially Grown on Boron Nitride Nanotubes

Single-walled and multiwalled molybdenum disulfide (MoS₂) nanotubes have been coaxially synthesized on small-diameter boron nitride nanotubes (BNNTs) that are obtained from removing single-walled carbon nanotubes (SWCNTs) in heteronanotubes of SWCNTs coated by BNNTs. The photoluminescence (PL) from single-walled MoS₂ nanotubes supported by core BNNTs is observed in this work, which evidences the direct bandgap structure of single-walled MoS₂ nanotubes with a diameter around 6-7 nm. The observation is consistent with our DFT results that the single-walled MoS₂ nanotube changes from an indirect-gap to a direct-gap semiconductor when the diameter of a nanotube is more than around 5.2 nm. On the other hand, when there are SWCNTs inside the heteronanotubes of BNNTs and single-walled MoS₂ nanotubes, the PL signal from MoS₂ nanotubes is considerably quenched. The charge transfer and energy transfer between SWCNTs and single-walled MoS₂ nanotubes were examined through characterizations by PL, X-ray photoelectron spectroscopy, and Raman spectroscopy. Moreover, the PL signal from multiwalled MoS₂ nanotubes is significantly quenched. Single-walled and multiwalled MoS₂ nanotubes exhibit different Raman features in both resonant and nonresonant Raman spectra.

One-step direct oxidation of fullerene-fused alkoxy ethers to ketones for evaporable fullerene derivatives

Ketones are widely applied moieties in designing functional materials and are commonly obtained by oxidation of alcohols. However, when alcohols are protected/functionalized, the direct oxidation strategies are substantially curbed. Here we show a highly efficient copper bromide promoted one-step direct oxidation of benzylic ethers to ketones with the aid of a fullerene pendant. Mechanistic studies unveil that fullerene can serve as an electron pool proceeding the one-step oxidation of alkoxy group to ketone. In the absence of the fullerene pendant, the unreachable activation energy threshold hampers the direct oxidation of the alkoxy group. In the presence of the fullerene pendant, generated fullerene radical cation can activate the neighbour C-H bond of the alkoxy moiety, allowing a favourable energy barrier for initiating the direct oxidation. The produced fullerene-fused ketone possesses high thermal stability, affording the pin-hole free and amorphous electron-transport layer with a high electron-transport mobility.

Phenomenological model of thermal transport in carbon nanotube and hetero-nanotube films

The thermal properties of individual single-walled carbon nanotubes (SWCNTs) have been well documented in the literature following decades of intensive study. However, when SWCNTs form a macroscale assembly, the thermal transport in these complex structures usually not only depends on the properties of the individual tubes, but also is affected and sometimes dominated by inner structural details, e.g. bundles and junctions. In this work, we first performed an experimental measurement of the thermal conductivities of individual SWCNT bundles of different sizes using a suspended micro-thermometer. The results, together with the data that we obtained from a previous work, give a complete experimental understanding of the effect of bundling on the thermal conductivity of SWCNTs. With these quantitative understandings, we propose a phenomenological model to describe the thermal transport in two-dimensional (2D) SWCNT films. The term 'line density' is defined to describe the effective thermal transport channels in this complex 2D network. Along with experimentally obtained geometric statistics and film transparency, the thermal conductance of SWCNTs is estimated, and the effects of bundle length, diameter, and contact conductance are systematically discussed. Finally, we extend this model to explain thermal transport in 2D networks of one-dimensional van der Waals heterostructures, which are coaxial hetero-nanotubes we recently synthesized using SWCNTs as the template. This extended model suggests that the contribution of boron nitride nanotubes (BNNTs) to the overall performance of a SWCNT-BNNT heterostructured film depends on the transparency of the original SWCNT film. The increase in the thermal conductance of a highly transparent film is estimated to be larger than that of a less transparent film, which shows a good agreement with our experimental observations and proves the validity of the proposed phenomenological model.

Ultrahigh-Aspect-Ratio Boron Nitride Nanosheets Leading to Superhigh In-Plane Thermal Conductivity of Foldable Heat Spreader

The rapid development of integrated circuits and electronic devices creates a strong demand for highly thermally conductive yet electrically insulating composites to efficiently solve "hot spot" problems during device operation. On the basis of these considerations, hexagonal boron nitride nanosheets (BNNS) have been regarded as promising fillers to fabricate polymer matrix composites. However, so far an efficient approach to prepare ultrahigh-aspect-ratio BNNS with large lateral size while maintaining an atomically thin nature is still lacking, seriously restricting further improvement of the thermal conductivity for BNNS/polymer composites. Here, a rapid and high-yield method based on a microfluidization technique is developed to obtain exfoliated BNNS with a record high aspect ratio of ≈1500 and a low degree of defects. A foldable and electrically insulating film made of such a BNNS and poly(vinyl alcohol) (PVA) matrix through filtration exhibits an in-plane thermal conductivity of 67.6 W m^-1 K^-1 at a BNNS loading of 83 wt %, leading to a record high value of thermal conductivity enhancement (≈35 500). The composite film then acts as a heat spreader for heat dissipation of high-power LED modules and shows superior cooling efficiency compared to commercial flexible copper clad laminate. Our findings provide a practical route to produce electrically insulating polymer composites with high thermal conductivity for thermal management applications in modern electronic devices.

Foldable Perovskite Solar Cells Using Carbon Nanotube-Embedded Ultrathin Polyimide Conductor

Recently, foldable electronics technology has become the focus of both academic and industrial research. The foldable device technology is distinct from flexible technology, as foldable devices have to withstand severe mechanical stresses such as those caused by an extremely small bending radius of 0.5 mm. To realize foldable devices, transparent conductors must exhibit outstanding mechanical resilience, for which they must be micrometer-thin, and the conducting material must be embedded into a substrate. Here, single-walled carbon nanotubes (CNTs)-polyimide (PI) composite film with a thickness of 7 µm is synthesized and used as a foldable transparent conductor in perovskite solar cells (PSCs). During the high-temperature curing of the CNTs-embedded PI conductor, the CNTs are stably and strongly p-doped using MoO x , resulting in enhanced conductivity and hole transportability. The ultrathin foldable transparent conductor exhibits a sheet resistance of 82 Ω sq.-1 and transmittance of 80% at 700 nm, with a maximum-power-point-tracking-output of 15.2% when made into a foldable solar cell. The foldable solar cells can withstand more than 10 000 folding cycles with a folding radius of 0.5 mm. Such mechanically resilient PSCs are unprecedented; further, they exhibit the best performance among the carbon-nanotube-transparent-electrode-based flexible solar cells.

Multiscale Structural Modulation of Anisotropic Graphene Framework for Polymer Composites Achieving Highly Efficient Thermal Energy Management

Graphene is usually embedded into polymer matrices for the development of thermally conductive composites, preferably forming an interconnected and anisotropic framework. Currently, the directional self-assembly of exfoliated graphene sheets is demonstrated to be the most effective way to synthesize anisotropic graphene frameworks. However, achieving a thermal conductivity enhancement (TCE) over 1500% with per 1 vol% graphene content in polymer matrices remains challenging, due to the high junction thermal resistance between the adjacent graphene sheets within the self-assembled graphene framework. Here, a multiscale structural modulation strategy for obtaining highly ordered structure of graphene framework and simultaneously reducing the junction thermal resistance is demonstrated. The resultant anisotropic framework contributes to the polymer composites with a record-high thermal conductivity of 56.8-62.4 W m-1 K-1 at the graphene loading of ≈13.3 vol%, giving an ultrahigh TCE per 1 vol% graphene over 2400%. Furthermore, thermal energy management applications of the composites as phase change materials for solar-thermal energy conversion and as thermal interface materials for electronic device cooling are demonstrated. The finding provides valuable guidance for designing high-performance thermally conductive composites and raises their possibility for practical use in thermal energy storage and thermal management of electronics.

Association of tumor size and internal echo pattern with coagulopathy associated with hepatic hemangioma

Little is known concerning causal factors associated with the size and echogenicity of hepatic hemangiomas. The aim of the present study was to investigate the associations between tumor size and echo pattern and coagulation factors, and to elucidate the growth pattern of hemangiomas. In 214 consecutive patients with hepatic hemangiomas, ultrasonography was performed to determine total tumor number, size, echogenicity and location, and serum laboratory tests for liver function and coagulation factors were carried out. The ultrasonographic appearance of hemangiomas was homogeneous in 75.7% of cases and mixed in 24.3% of cases. A mixed echo pattern was seen in 1 out of 145 masses (0.7%) with a diameter <20 mm, in 30 out of 48 (62.5%) with a diameter of 20-40 mm, and in all of the 21 (100%) with a diameter >40 mm. Platelet counts (P<0.0001) and fibrinogen levels (P<0.01) were lower in patients with larger and mixed tumors. Levels of thrombin-antithrombin III complex (TAT), D-dimer, and fibrin and fibrinogen degradation products (FDP) were significantly elevated along with an increase in tumor size (all P<0.0001), and the number of patients with the abnormal values of TAT, D-dimer, and FDP was significantly higher in the mixed group than in the homogeneous group (all P<0.0001). Fibrinogen (P<0.01), platelet count (P<0.001), portal vein diameter (P<0.0001), splenic index (P<0.01), and levels of TAT, D-dimer and FDP (all P<0.0001) were significantly associated with tumor size. Multivariate analysis revealed TAT, D-dimer and FDP as independent predictors of tumor size. The internal echo pattern became mixed as size increased. The size and echogenicity of hemangiomas were closely associated with coagulation factors. Therefore, it was speculated that differences in size and echogenicity were caused by intratumoral thrombosis and subsequent hemorrhage.

One-Dimensional van der Waals Heterojunction Diode

The synthesis of one-dimensional van der Waals heterostructures was realized recently, which offers alternative possibilities for prospective applications in electronics and optoelectronics. The even reduced dimension will enable different properties and further miniaturization beyond the capabilities of their two-dimensional counterparts. The natural doping results in p-type electrical characteristics for semiconducting single-walled carbon nanotubes and n-type for molybdenum disulfide with conventional noble metal contacts. Therefore, we demonstrate here a one-dimensional heterostructure nanotube, 11 nm wide, with the coaxial assembly of a semiconducting single-walled carbon nanotube, insulating boron nitride nanotube, and semiconducting molybdenum disulfide nanotube, which induces a radial semiconductor-insulator-semiconductor heterojunction. When opposite potential polarity was applied on a semiconducting single-walled carbon nanotube and molybdenum disulfide nanotube, respectively, the rectifying effect was materialized.

Heat diffusion-related damping process in a highly precise coarse-grained model for nonlinear motion of SWCNT

Second sound and heat diffusion in single-walled carbon nanotubes (SWCNT) are well-known phenomena which is related to the high thermal conductivity of this material. In this paper, we have shown that the heat diffusion along the tube axis affects the macroscopic motion of SWCNT and adapting this phenomena to coarse-grained (CG) model can improve the precision of the coarse-grained molecular dynamics (CGMD) exceptionally. The nonlinear macroscopic motion of SWCNT in the free thermal vibration condition in adiabatic environment is demonstrated in the most simplified version of CG modeling as maintaining finite temperature and total energy with suggested dissipation process derived from internal heat diffusion. The internal heat diffusion related to the cross correlated momentum from different potential energy functions is considered, and it can reproduce the nonlinear dynamic nature of SWCNTs without external thermostatting in CG model. Memory effect and thermostat with random noise distribution are not included, and the effect of heat diffusion on memory effect is quantified through Mori-Zwanzig formalism. This diffusion shows perfect syncronization of the motion between that of CGMD and MD simulation, which is started with initial conditions from the molecular dynamics (MD) simulation. The heat diffusion related to this process has shown the same dispersive characteristics to second wave in SWCNT. This replication with good precision indicates that the internal heat diffusion process is the essential cause of the nonlinearity of the tube. The nonlinear dynamic characteristics from the various scale of simple beads systems are examined with expanding its time step and node length.

Sequential variation of super periodic structures emerged in Bi-layered perovskite pillar-matrix epitaxial nanocomposite films with spinel ferrites

The phase stability of Aurivillius bismuth-layer structured Bi5Ti3FeO15 (BTFO15) has been investigated in an epitaxial pillar-matrix nanocomposite system with spinel ferrites.

Denatured M13 Bacteriophage-Templated Perovskite Solar Cells Exhibiting High Efficiency

The M13 bacteriophage, a nature-inspired environmentally friendly biomaterial, is used as a perovskite crystal growth template and a grain boundary passivator in perovskite solar cells. The amino groups and carboxyl groups of amino acids on the M13 bacteriophage surface function as Lewis bases, interacting with the perovskite materials. The M13 bacteriophage-added perovskite films show a larger grain size and reduced trap-sites compared with the reference perovskite films. In addition, the existence of the M13 bacteriophage induces light scattering effect, which enhances the light absorption particularly in the long-wavelength region around 825 nm. Both the passivation effect of the M13 bacteriophage coordinating to the perovskite defect sites and the light scattering effect intensify when the M13 virus-added perovskite precursor solution is heated at 90 °C prior to the film formation. Heating the solution denatures the M13 bacteriophage by breaking their inter- and intra-molecular bondings. The denatured M13 bacteriophage-added perovskite solar cells exhibit an efficiency of 20.1% while the reference devices give an efficiency of 17.8%. The great improvement in efficiency comes from all of the three photovoltaic parameters, namely short-circuit current, open-circuit voltage, and fill factor, which correspond to the perovskite grain size, trap-site passivation, and charge transport, respectively.

Ultrafast saturable absorption of large-diameter single-walled carbon nanotubes for passive mode locking in the mid-infrared

We study the saturable absorption properties of single-walled carbon nanotubes (SWCNTs) with a large diameter of 2.2 nm and the corresponding exciton resonance at a wavelength of 2.4 µm. At resonant excitation, a large modulation depth of approximately 30 % and a small saturation fluence of a few tens of µJ/cm² are evaluated. The temporal response is characterized by an instantaneous rise and a subpicosecond recovery. We also utilize the SWCNTs to realize sub-50 fs, self-start mode locking in a Cr:ZnS laser, revealing that the film thickness is an important parameter that affects the possible pulse energy and duration. The results prove that semiconductor SWCNTs with tailored diameters exceeding 2 nm are useful for passive mode locking in the mid-infrared range.