Influence of remaining tooth substance and post-endodontic restoration on fracture strength of endodontically treated maxillary incisors

The aim is to evaluate the influence of remaining tooth substance and post-endodontic restoration on fracture strength of endodontically treated maxillary incisors. 150 maxillary central incisors were divided into three groups, Group 0, intact teeth; Group 1, removal of distal wall; Group 2, removal of mesial and distal walls, and further into two subgroups A₀,A₁,A₂ and B₀,B₁,B₂ according to post-endodontic restoration (post/no-post), then loaded to fracture. Interactions among variables and intergroup significance were tested with two-way ANOVA and Kruskal Wallis's tests (p≤0.05). Tukey's test was applied for multiple comparisons. Statistically significant differences were found between groups B₁-A₁, and B₂-A₂, but they were not found between B₀-A₀. Intragroup analysis showed statistically significant differences in both groups post/no-post with decreasing dental substance. Fiber post placement causes an increase in fracture strength and a reduction of irreparable fractures in endodontically treated maxillary central incisors that lost at least one wall.

Influence of single post, oval, and multi-post restorative techniques and amount of residual tooth substance on fracture strength of endodontically treated maxillary premolars

PURPOSE

The aim of this study was to compare the influence of the number of coronal walls and post-endodontic restorations on the mechanical strength of 165 recently extracted endodontically treated maxillary premolars.

METHODS

The teeth were divided into 3 control (no post) and 3 test groups according to the number of residual walls. Each test group was divided into subgroups according to the type of post-endodontic restoration (single, oval, and multi-post techniques). Samples were prepared conforming to the assigned subgroup. A universal loading machine applied a load parallel to the longitudinal axis of the teeth, thus simulating physiological occlusion. ANOVA and the Kruskal Wallis test were used for comparisons (P ≤ 0.05), and Tukey's test for multiple comparisons.

RESULTS

For intact teeth, significant differences were found among all 3 subgroups, with single post showing the highest values. For 3 residual walls, oval post resulted in significantly lower values than single and multi-post systems. For 2 residual walls, the multi-post technique showed almost twice the resistance of oval post restorations.

CONCLUSION

In oval canals the use of a single or multi-post technique increased post-and-core resistance even in intact teeth, whereas oval fiber posts showed no improvements. Multi-post design improved fracture resistance mostly in maxillary premolars lacking both marginal ridges.

Different Post Placement Strategies for the Restoration of Endodontically Treated Maxillary Premolars with Two Roots: Single Post vs Double Post

AIM AND OBJECTIVE

The present study compared the fracture strength and failure pattern of endodontically treated, bi-rooted, maxillary premolars with different number of coronal walls and postendodontic restoration (one vs double post).

MATERIALS AND METHODS

105 premolars were divided into 3 groups according to the number of residual walls: control group (intact teeth; n = 15), group 1 (3 residual walls; n = 45), group 2 (2 residual walls; n = 45). Each test group was then divided into 3 subgroups (n = 15 each) according to postendodontic restoration: no post (A), 1 post (B) or 2 posts (C). A load was applied parallel to the longitudinal axis of the teeth, thus simulating physiological occlusion. ANOVA and Tukey's tests were used to detect fracture strength differences among groups, while Chi-square test was used to check differences in fracture pattern.

RESULTS

No significant differences were observed between control group (intact teeth) and groups A1 (p = 0.999), B1 (p = 0.997) and C1 (p = 1.000); statistically significant differences were detected between control group and groups A2 (p < 0.001), B2 (p < 0.001) and C2 (p < 0.05). Different post placement techniques were non-significantly associated with fracture pattern in both groups 1 (p = 0.666) and 2 (p = 0.143) while, irrespective of the number of posts, the presence of the post was significantly associated with the fracture pattern in teeth with two residual walls. The double-post technique did not further improve the fracture resistance of hardly damaged endodontically treated maxillary bi-rooted premolars compared to single-post technique. Therefore, the insertion of a single post in the palatal canal could be a safer and more conservative choice.

CLINICAL SIGNIFICANCE

The double-post technique did not further improve the fracture resistance of severely structurally compromised endodontically treated maxillary premolars with two roots compared to the single-post technique. Therefore, the safer and less invasive treatment is the placement of a single post in the palatal canal.

A new framework to identify dental emergencies in the COVID-19 era

In order to reduce the spread of COVID-19 (Coronavirus Disease 2019), it is crucial to take extraordinary prevention and safety measures in dental offices, and to defer all elective and non-urgent procedures. Dental emergencies are defined through oral symptoms but, the systemic and psychological conditions of each patient should be considered. The present short communication proposes a multilevel evaluation (oral, systemic and psychological) and risk assessment score for the management of dental emergencies following the SARS-CoV-2 (severe acute respiratory syndrome coronavirus-2) outbreak. A comprehensive categorization and score scale assessment for dental emergencies allows a better identification of patient's treatment needs and avoids unnecessary contact between dental health care providers and patients during the SARS-CoV-2 pandemic.

Push-out Bond Strength of Fiber Posts Cemented Using New Universal Adhesives on Etched and Nonetched Intraradicular Dentin

AIM

The aim of this study was to assess if the curing mode and the etching mode could affect the push-out bond strength of different post cementation systems using two universal adhesives.

MATERIALS AND METHODS

A total of 100 single-rooted teeth were divided into Prime & Bond Elect (PBE), Prime & Bond Active (PBA), and Prime & Bond XP (PBXP) as a control. The PBE, PBA, and PBXP were used in the self-etch (SE) and etch and rinse (E&R) mode. Post cementation was performed using Core X flow used in dark-cure and in light-cure. Data were analyzed using the one-way ANOVA test and post hoc Bonferroni and Dunnet tests. The Student's t test was performed to find significance between two independent groups.

RESULTS

Bond strength was significantly influenced by the adhesive strategies. The PBE and PBA obtained higher values when used in the SE mode (p < 0.001). Light-cured groups obtained significantly higher values (p < 0.001) compared to dark-cured groups. The post space region also had a significant effect on the bond strength; the apical third recorded lower values in all groups (p < 0.001).

CONCLUSION

The PBA and PBE universal adhesives obtained higher PBS values when used in the SE mode and followed by the light-curing of resin cement.

CLINICAL SIGNIFICANCE

Universal adhesives represent a good alternative to the conventional total-etch adhesive system for fiber post cementation. Since they perform better in SE, they would be recommendable in clinical practice, as they can be used with a simplified technique.

A pilot trial on lithium disilicate partial crowns using a novel prosthodontic functional index for teeth (FIT)

Background

Lithium disilicate is now a well accepted material for indirect restorations. The aim of this trial was to evaluate two lithium disilicate systems using a novel prosthodontic Functional Index for Teeth (FIT).

Methods

Partial adhesive crowns on natural abutment posterior teeth were made on sixty patients. Patients were divided into two groups: Group 1 IPS e.max press (Ivoclar-Vivadent, Schaan, Liecthestein), and Group 2 Initial LiSi press (GC Co., Tokyo, Japan). The restorations were followed-up for 3 years, and the FIT evaluation was performed at last recall. The FIT is composed of seven variables (Interproximal, Occlusion, Design, Mucosa, Bone, Biology and Margins), each of them are evaluated using a 0–1-2 scoring scheme, and is investigated by an oral radiograph and occlusal and buccal pictures. More in details, three variables have the three scores made on the presence or not of major, minor or no discrepancy (for ‘Interproximal’, ‘Occlusion’ and ‘Design’), presence or not of keratinized and attached gingiva (‘Mucosa’), presence of bone loss > 1.5 mm, < 1.5 mm or not detectable (‘Bone’), presence or not of Bleeding on Probing and or Plaque Index (‘Biology’), presence of detectable gap and marginal stain or not (‘Margins’). The Mann-Whitney ‘U’ test was used and the level of significance was set at p < 0.05. Also, “success” of the crowns (restoration in place without any biological or technical complication) and “survival” (restoration still in place with biological or technical complication) were evaluated.

Results

Regarding FIT scores, all partial crowns showed a stable level of the alveolar crest without detectable signs of bone loss in the radiographic analysis. All other evaluated parameters showed a high score, between 1.73 and 2. No statistically significant difference emerged between the two groups in any of the assessed variables (p > 0.05). All FIT scores were compatible with the outcome of clinical success and no one restoration was replaced or repaired and the success rate was 100%.

Conclusions

The results showed that it is possible to evaluate the clinical performance of partial crowns using FIT. The FIT proved to be an effective tool to monitor the performance of the restorations and their compatibility with periodontal tissues at the recall. The FIT can be really helpful for a standardized evaluation of the quality of the therapy in prosthodontic dentistry. The two lithium disilicate materials showed similar results after 3 years of clinical service.

Trial registration

The study protocol was approved by the Ethical Committee of University of Siena (clinicaltrial.gov # NCT 01835821), ‘retrospectively registered’.

The Effect of Zinc Lactate added Tablets on Volatile Sulfur-containing Compounds in the Oral Cavity

Background:

Oral malodor is defined as breath that is offensive to others and its prevalence is around 35%.

Objective:

A controlled clinical double-blinded study was conducted to assess the efficacy of sugar-free tablets containing zinc lactate on oral Volatile Sulfur-containing Compounds (VSC) versus placebo tablets.

Methods:

All participants, who met the inclusion criteria, had to score a level of VSC ≥75 ppb at the basal measurement. Subjects were randomly assigned to one of the groups. The test tablet (0.7g) contained 0.255 mg of zinc lactate; the control tablet was identical but without the active agent. The OralChroma2© device was utilized to evaluate VSC. The levels were recorded at baseline, after sucking two tablets in succession and after 1 hour and 2 hours. Data were analyzed with SPSS and significance was set at α=0.05.

Results:

186 subjects completed the trial. The mean reduction from baseline at the end of tablets sucking was, respectively, 43% (p <0.001) in the control and 67% (p <0.001) in the test group, after 1 hour, it was 6% in the control (p=NS) and 25% (p <0.001) in the test group, after 2 hours, it was 3% in the control (p=NS) and 12% (p <0.001) in the test group. The comparison between the two groups after baseline adjustment showed a statistically significant difference for reductions at the end of the sucking period (p <0.001), after 1 hour (p <0.001) and after 2 hours (p <0.05).

Conclusion:

Tablets containing zinc lactate can statistically reduce the oral VSC levels immediately and for over 2 hours.

Evidence-based treatment planning for the restoration of endodontically treated single teeth: importance of coronal seal, post vs no post, and indirect vs direct restoration

Every orthograde endodontic procedure requires restoration of the coronal (access) cavity. The specific type of treatment used in individual cases greatly depends on the amount and configuration of the residual coronal tooth structure. In practice there are Class I access cavities as well as coronally severely damaged, even decapitated, teeth and all conceivable manifestations in between. The latest attempts to review results from clinical trials to answer the question of whether post placement or crowning can be recommended for the restoration of endodontically treated teeth or not are inconclusive. For dental practitioners, this is not a satisfactory result. This appraisal evaluates available evidence and trends for coronal restoration of single endodontically treated teeth with a focus on clinical investigations, where available. It provides specific recommendations for their coronal restoration to assist clinicians in their decision making and treatment planning.

Effect of four different finishing and polishing systems on resin composites: roughness surface and gloss retention evaluations

BACKGROUND

Finishing and polishing procedures play a crucial role to achieve the best aesthetic result of direct restorations. Many manufacturers to the clinicians offer different finishing and polishing systems. This study aims to examine the behavior of four different finishing and polishing systems on the roughness, gloss and morphology surface of one resin composite.

METHODS

Twelve Filtek XTE Supreme (3M ESPE) discs were prepared and divided into 4 groups (N.=3), depending on the different finishing and polishing systems: Group 1 (GP1) Sof-Lex Extra-Thin XT discs; Group 2 (GP2) Sof-Lex Coarse black disc, multi-fluted bur, Sof-Lex Diamond Polishing System Spirals; Group 3 (GP3) Sof-Lex Coarse black disc, multi-fluted bur, Sof-Lex Diamond Polishing System Spirals, Diamond Twist SCL; Group 4 (GP4) with Sof-Lex Coarse black disc, multi-fluted bur and Occlubrush. The roughness and gloss were evaluated and then samples examined by Scanning Electron Microscopy (SEM) to analyse the morphology after finishing and polishing.

RESULTS

Regarding the surface roughness, GP1 and GP2 showed similar values for Ra, Ry, Rz and Rq parameters; while GP3 displayed the lowest values in all parameters; GP4 had the highest Ra value. Regarding the gloss, the values decreased as follows: GP3>GP2=GP4>GP1 (P<0.05). Scanning electron micrographs showed the abrasion of the samples with an increase in the surface roughness in GP1 and GP4. One-way ANOVA followed by Tukey's Test was used for statistical evaluations (P<0.05).

CONCLUSIONS

The roughness and gloss surface of resin composites depend on the finishing and polishing systems used. This study demonstrates that satisfactory gloss outcomes are obtained using a system based on diamond paste.

Antimicrobial efficacy of cordless sonic or ultrasonic devices on Enterococcus faecalis-infected root canals

AIM

The aim of the present study was to evaluate the immediate and residual antimicrobial activity of cordless sonic or ultrasonic devices on Enterococcus faecalis (E faecalis)-infected teeth.

METHODS

A total of 140 single-rooted extracted teeth with E faecalis were grouped as follows (N = 15): conventional syringe irrigation with 3% sodium hypochlorite activated by ultrasonic device (group 1) or cordless ultrasonic device (group 2), EndoActivator (group 3) or without activation (group 4), conventional syringe irrigation with sterile bi-distilled water and ultrasonic device (group 5), EndoUltra (group 6), EndoActivator (group 7), or without activation (group 8). The remaining 20 teeth were used for positive and negative controls. Colony-forming units (CFU) and turbidity were recorded from bacteriological samples taken before and after irrigation and after 24 hours of re-incubation. Data were statistically analyzed using Student's t test, Mann-Whitney test, Kruskal-Wallis test, and Dunn's multiple comparison tests (P < .05).

RESULTS

Groups 1 and 2 showed higher antimicrobial efficacy than groups 3 and 4 (P < .05). No bacteria reduction was found in groups 5-8 (P > .05). After 24 hours, regrowth of bacteria was not significantly different for all groups (P > .05).

CONCLUSIONS

Ultrasound produced lower CFU and turbidity after treatment and after re-incubation of 24 hours than sonic or no activation.

Shaping effectiveness and surface topography of reciprocating files after multiple simulated uses

This in vitro study assessed morphological changes and efficiency of reciprocating files after multiple uses. Sixty standardized Endo Training Blocks and 10 ReciprocR25 files were selected (six blocks for each file). Each file was its own control (before use vs. after each instrumentation). The instruments were used according to the manufacturer's instructions, and scanning electron microscopy was used to observe fatigue cracks, metal strips/metal flash, pitting, fretting, debris, disruption of the cutting edge, and plastic deformations after each instrumentation. The presence of seven wear variables was scored semiquantitatively by viewing micrographs collected before and after use. The prepared areas in resin blocks were calculated and compared by using AutoCAD software. The control group had significantly lower values for all wear variables except fretting and plastic deformation. The presence of fatigue cracks and metal strips/metal flash significantly differed between unused instruments and instruments used four or five times, in all observed sections. The area of instrumented Endo Training Blocks significantly differed in relation to the number of instrument uses. The Reciproc files wore progressively, and repeated use affected their shaping efficiency in simulated canals.

Influence of proper or reciprocating optimum torque reverse kinematics on cyclic fatigue of four single files

AIM

The aim of the present study was to evaluate the resistance to cyclic fatigue of heat-treated single files used in proper or in reciprocating optimum torque reverse motions.

METHODS

Ninety-six HyFlex electrical discharge machining (EDM), Reciproc R25 (Rec), WaveOne Primary (WO), and WaveOne Gold (WOG) Primary were used. Resistance to cyclic fatigue was determined by recording time to fracture in a stainless steel artificial canal. Differential scanning calorimetric analysis was performed. Data were analyzed by two-way analysis of variance and Bonferroni post-hoc tests at 0.05.

RESULTS

In both movements, HyFlex EDM showed higher time to fracture than other files (P < 0.0001). Rec showed higher time to fracture than WO (P < 0.0001), while WOG showed higher cyclic fatigue resistance than Rec and WO with both movements (P < 0.005).

CONCLUSIONS

Reciprocating optimum torque reverse motion improved significantly cyclic fatigue resistance of gold and controlled memory wire single files.

Crossover Clinical Trial of Tablets Containing Sodium Tripolyphosphate on Dental Stain Formation

OBJECTIVES

The purpose of this clinical investigation was to evaluate the effectiveness of sugar-free tablets containing sodium tripolyphosphate 2% or sodium tripolyphosphate 0.65%, compared to a no-tablet control in preventing the formation of extrinsic stains over a 12- week period of regular unsupervised use preserving daily oral hygiene with dentifrice and usual tooth brushing.

METHODS

This was a single-center, examiner-blind, randomized, 12-week crossover clinical trial. Sixty-six adult participants were enrolled in the study and were submitted to a professional cleaning to have a stain-free baseline. They either consumed two sugar-free tablets four times per day or not for 12 weeks. At the crossover, all procedures were repeated and subjects were assigned to another group. Extrinsic stain was measured at each 12-week period by the Modified Lobene Stain Index (MLSI).

RESULTS

After the three legs of 12 weeks, 60 subjects completed the trial, their MLSI stain scores showed a significant 35.5% reduction (p < 0.001) in new stain formation for those using the sodium tripolyphosphate 2% tablets, and a significant 23.3% reduction (p < 0.001) in new stain formation for those using the sodium tripolyphosphate 0.65% tablets versus the control group.

CONCLUSIONS

This clinical study showed that regular use of sugar-free tablets added with sodium tripolyphosphate 2% or 0.65% can reduce stain formation on the anterior teeth respectively by 35.5% (p < 0.001) or 23.3% (p < 0.001), both on facial and lingual/palatal surfaces.

Effects of scanning technique on in vitro performance of CAD/CAM-fabricated fiber posts

This study assessed push-out strength, cement layer thickness, and interfacial nanoleakage of luted fiber posts fabricated with computer-aided design/computer-assisted manufacture (CAD/CAM) technology after use of 1 of 3 scanning techniques, namely, direct scanning of the post space (DS), scanning of a polyether impression of the post space (IS), and scanning of a plaster model of the post space (MS). Thirty premolars were randomly assigned to three groups corresponding to the scanning technique. Posts were computer-designed and milled from experimental fiber-reinforced composite blocks. The mean (±SD) values for push-out strength and cement thickness were 17.1 ± 7.7 MPa and 162 ± 24 μm, respectively, for DS, 10.7 ± 4.6 MPa and 187 ± 50 μm for IS, and 12.0 ± 7.2 MPa and 258 ± 78 μm for MS specimens. Median (interquartile range) interfacial nanoleakage scores were 3 (2-4) for DS, 2.5 (2-4) for IS, and 3 (2-4) for MS. Post retention was better for fiber posts fabricated by DS technique than for those fabricated by IS and MS. Cement thickness did not differ between DS and IS specimens, but the cement layer was significantly thicker in the MS group than in the other two groups. Scanning technique did not affect sealing ability, as the three groups had comparable nanoleakage values.

Marginal sealing of relocated cervical margins of mesio-occluso-distal overlays

We investigated the effect of cervical marginal relocation (CMR) on marginal sealing with two different viscosity resin composites, before adhesive cementation of composite computer-aided design/computer-assisted manufacture mesio-occluso-distal (MOD) overlays. Standardized MOD cavities prepared in 39 human molars were randomly assigned to three groups. The proximal margins on the mesial side were located 1 mm below the cementoenamel junction. On the distal side of the tooth, the margins were located 1 mm above the cementoenamel junction. In Groups 1 and 2, mesial proximal boxes were elevated with a hybrid composite (GC Essentia MD) and a flowable composite (GC G-ænial Universal Flo), respectively. CMR was not performed in Group 3. The overlays were adhesively cemented, and interfacial leakage was quantified by scoring the depth of silver nitrate penetration along the adhesive interfaces. Leakage score at the dentin-CMR composite interface did not significantly differ between the two tested composites but was significantly lower for Group 3. In all groups, scores were significantly higher at the dentin interface than at the enamel interface. These results indicate that the performance of flowable and microhybrid resin composites, as indicated by marginal sealing ability, is comparable for CMR.

Evolution of Nickel-titanium Alloys in Endodontics

To improve clinical use of nickel-titanium (NiTi) endodontic rotary instruments by better understanding the alloys that compose them. A large number of engine-driven NiTi shaping instruments already exists on the market and newer generations are being introduced regularly. While emphasis is being put on design and technique, manufacturers are more discreet about alloy characteristics that dictate instrument behavior. Along with design and technique, alloy characteristics of endodontic instruments is one of the main variables affecting clinical performance. Modification in NiTi alloys is numerous and may yield improvements, but also drawbacks. Martensitic instruments seem to display better cyclic fatigue properties at the expense of surface hardness, prompting the need for surface treatments. On the contrary, such surface treatments may improve cutting efficiency but are detrimental to the gain in cyclic fatigue resistance. Although the design of the instrument is vital, it should in no way cloud the importance of the properties of the alloy and how they influence the clinical behavior of NiTi instruments.

CLINICAL SIGNIFICANCE

Dentists are mostly clinicians rather than engineers. With the advances in instrumentation design and alloys, they have an obligation to deal more intimately with engineering consideration to not only take advantage of their possibilities but also acknowledge their limitations.

Performance of CAD/CAM fabricated fiber posts in oval-shaped root canals: An in vitro study

PURPOSE

To assess the push-out strength, the cement layer thickness and the interfacial nanoleakage of prefabricated fiber posts, CAD/CAM fiber posts and metal cast posts cemented into oval-shaped root canals.

METHODS

Oval-shaped post spaces were prepared in 30 single-rooted premolars. Roots were randomly assigned to three groups (n=10), according to the post type to be inserted: Group 1: Prefabricated fiber post (D.T. Light-Post X-RO Illusion); Group 2: Cast metal post; Group 3: CAD/CAM-fabricated fiber post (experimental fiber blocks). In Group 3, post spaces were sprayed with scan powder (VITA), scanned with an inEos 4.2 scanner, and fiber posts were milled using an inLab MC XL CAD/CAM milling unit. All posts were cemented using Gradia Core dual-cure resin cement in combination with Gradia core self-etching bond (GC). After 24 hours, the specimens were sectioned perpendicular to the long axis into six 1 mm-thick sections, which were differentiated by the root level. Sections from six roots per group were used to measure the cement thickness and subsequently for the thin-slice push-out test, whereas the sections from the remaining four teeth were assigned to interfacial nanoleakage test. The cement thickness around the posts was measured in micrometers (µm) on the digital images acquired with a digital microscope using the Digimizer software. Thin-slice push-out test was conducted using a universal testing machine at the crosshead speed of 0.5 mm/minute and the bond strength was expressed in megaPascals (MPa). The interfacial nanoleakage was observed under light microscope and quantified by scoring the depth of silver nitrate penetration along the post-cement-dentin interfaces. The obtained results were statistically analyzed by Kruskal-Wallis ANOVA, followed by the Dunn's Multiple Range test for post hoc comparisons. The level of significance was set at P< 0.05.

RESULTS

Statistically significant differences were found among the groups in push-out bond strength, cement thickness and interfacial nanoleakage (P< 0.05). CAD/CAM-fabricated fiber posts achieved retention that was comparable to that of cast metal posts and significantly higher than that of prefabricated fiber posts. The cement layer thickness around CAD/CAM-fabricated fiber posts was significantly lower than around prefabricated fiber posts, but higher than that around cast metal posts. Root level was not a significant factor for push-out strength in any of the groups, whereas it significantly affected cement layer thickness only in the prefabricated fiber post group. No differences were observed in interfacial nanoleakage between CAD/CAM fabricated and prefabricated fiber posts, while nanoleakage recorded in cast metal posts was significantly lower.

CLINICAL SIGNIFICANCE

CAD/CAM fabricated fiber posts could represent a valid alternative to traditionally used posts in the restoration of endodontically-treated teeth with oval or wide root canals, offering the advantages of better esthetics, retention, and cement thickness values that are comparable to cast post and cores.

Use of bioactive materials and limited FOV CBCT in the treatment of a replanted permanent tooth affected by inflammatory external root resorption: a case report

BACKGROUND

Inflammatory external root resorption is one of the possible complications of replantation of an avulsed tooth. Several studies have shown that limited FOV CBCT is an efficient diagnostic support and in treatment planning of these cases in paediatric patients because of its high resolution combined with low radiation doses. The recent literature has suggested that Biodentine is an effective material for resolution of inflammatory root resorption.

CASE REPORT

This article describes the successful therapy of a replanted tooth affected by inflammatory root resorption. In the present case, a CBCT exam was performed to detect the extent of the damage, and the canal was filled with Biodentine in the apical third. At present, the threated tooth is asymptomatic, and the twelve months follow-up examination showed healing of periradicular hard tissues.