Brain tissue interaction with three-dimensional, honeycomb polycaprolactone-based scaffolds designed for cranial reconstruction following traumatic brain injury

Following traumatic brain injury (TBI), resultant voids are unable to support injections of suspension treatments, leading to ineffective healing. Moreover, without a structure to support the large defect, the defect site suffers from mechanical instability, which may impair the healing process. Therefore, having a delivery vehicle that can temporarily fill and provide mechanical support to the defect site may alleviate the healing process. In this work, we reported for the first time, the inflammatory response of brain tissue with polycaprolactone (PCL) and PCL-tricalcium phosphate (TCP) scaffolds designed and fabricated for cranial reconstruction. After cranial defects were created in Sprague-Dawley rats, PCL and PCL-TCP scaffolds were implanted for a period of 1 week and 1 month. Following histology and immunofluorescence staining with the ionized calcium binding adaptor molecule-1 (IBA-1), glial fibrillary acidic protein (GFAP), nestin, and neuronal nuclei (NeuN), results indicated that IBA-1-positive activated microglia were observed across all groups, and declined significantly by 1 month (p<0.05). Interestingly, IBA-1-positive microglia were significantly fewer in the PCL-TCP group (p<0.05), suggesting a relatively milder inflammatory response. A decrease in the number of GFAP-positive cells among all groups over time (>29%) was also observed. Initially, astrocyte hypertrophy was observed proximal to the TBI site (55% in PCL and PCL-TCP groups, 75% in control groups), but it subsided by 1 month. Proximal to the TBI site, nestin immunoreactivity was intense during week 1, and which reduced by 1 month across all groups. NeuN-positive neurons were shrunken proximal to the TBI site (<0.9 mm), 32% smaller in the PCL-TCP group and 27% smaller in the PCL group. Based on above data indicating the comparatively milder, initial inflammatory response of brain tissue to PCL-TCP scaffolds, it is suggested that PCL-TCP scaffolds have notable clinical advantages as compared to PCL scaffolds.

Vasculogenic and osteogenesis-enhancing potential of human umbilical cord blood endothelial colony-forming cells

Umbilical cord blood-derived endothelial colony-forming cells (UCB-ECFC) show utility in neovascularization, but their contribution to osteogenesis has not been defined. Cocultures of UCB-ECFC with human fetal-mesenchymal stem cells (hfMSC) resulted in earlier induction of alkaline phosphatase (ALP) (Day 7 vs. 10) and increased mineralization (1.9×; p < .001) compared to hfMSC monocultures. This effect was mediated through soluble factors in ECFC-conditioned media, leading to 1.8-2.2× higher ALP levels and a 1.4-1.5× increase in calcium deposition (p < .01) in a dose-dependent manner. Transcriptomic and protein array studies demonstrated high basal levels of osteogenic (BMPs and TGF-βs) and angiogenic (VEGF and angiopoietins) regulators. Comparison of defined UCB and adult peripheral blood ECFC showed higher osteogenic and angiogenic gene expression in UCB-ECFC. Subcutaneous implantation of UCB-ECFC with hfMSC in immunodeficient mice resulted in the formation of chimeric human vessels, with a 2.2-fold increase in host neovascularization compared to hfMSC-only implants (p = .001). We conclude that this study shows that UCB-ECFC have potential in therapeutic angiogenesis and osteogenic applications in conjunction with MSC. We speculate that UCB-ECFC play an important role in skeletal and vascular development during perinatal development but less so in later life when expression of key osteogenesis and angiogenesis genes in ECFC is lower.

Contrasting effects of vasculogenic induction upon biaxial bioreactor stimulation of mesenchymal stem cells and endothelial progenitor cells cocultures in three-dimensional scaffolds under in vitro and in vivo paradigms for vascularized bone tissue engineering

Clinical translation of bone tissue engineering approaches for fracture repair has been hampered by inadequate vascularization required for maintaining cell survival, skeletal regeneration, and remodeling. The potential of vasculature formation within tissue-engineered grafts depends on various factors, including an appropriate choice of scaffold and its microarchitectural design for the support of tissue ingrowth and vessel infiltration, vasculogenic potential of cell types and mechanostimulation on cells to enhance cytokine expression. Here, we demonstrated the effect of biomechanical stimulation on vasculogenic and bone-forming capacity of umbilical-cord-blood endothelial progenitor cells (UCB-EPC) and human fetal bone marrow-derived mesenchymal stem cell (hfMSC) seeded within macroporous scaffolds and cocultured dynamically in a biaxial bioreactor. Dynamically cultured EPC/hfMSC constructs generated greater mineralization and calcium deposition consistently over 14 days of culture (1.7-fold on day 14; p<0.05). However, in vitro vessel formation was not observed as compared to an extensive EPC-vessel network formed under static culture on day 7. Subsequent subcutaneous implantations in NOD/SCID mice showed 1.4-fold higher human:mouse cell chimerism (p<0.001), with a more even cellular distribution throughout the dynamically cultured scaffolds. In addition, there was earlier evidence of vessel infiltration into the scaffold and a trend toward increased ectopic bone formation, suggesting improved efficacy and cellular survival through early vascularization upon biomechanical stimulation. The integrative use of bioreactor culture systems with macroporous scaffolds and cocultured osteogenic and vasculogenic cells promotes maturation of EPC/hfMSC-scaffold grafts necessary for vascularized bone tissue engineering applications.

Review: development of clinically relevant scaffolds for vascularised bone tissue engineering

Clinical translation of scaffold-based bone tissue engineering (BTE) therapy still faces many challenges despite intense investigations and advancement over the years. To address these clinical barriers, it is important to analyse the current technical challenges in constructing a clinically relevant scaffold and subsequent clinical issues relating to bone repair. This review highlights the key challenges hampering widespread clinical translation of scaffold-based vascularised BTE, with a focus on the repair of large non-union defects. The main limitations of current scaffolds include the lack of sufficient vascularisation, insufficient mechanical strength as well as issues relating to the osseointegration of the bioresorbable scaffold and bone infection management. Critical insights on the current trends of scaffold technologies and future directions for advancing next-generation BTE scaffolds into the clinical realm are discussed. Considerations concerning regulatory approval and the route towards commercialisation of the scaffolds for widespread clinical utility will also be introduced.

Development of perforated microthin poly(ε-caprolactone) films as matrices for membrane tissue engineering

The design and fabrication of thin films based on bioresorbable polymers such as poly(epsilon-caprolactone) (PCL) has been the focus of a part of current biomedical research, especially as matrices for membrane tissue engineering. We have successfully developed perforated microthin PCL membrane for this purpose. Two critical issues are the control of moisture permeability and understanding the degradation of PCL microthin film. In order to increase the moisture permeability. PCL films were biaxially stretched to a thickness of 10 +/- 3 microm and perforated with uniform array of holes (180-275 microm) using a Sony Robotic system. After perforation, the water vapour transmission rate was increased by 50% to a value of 47.6 +/- 2.7 g/h per m2. Accelerated hydrolytic degradations were performed in 5 M NaOH. The degraded samples were characterised for changes in weight, surface morphology, mechanical properties, crystallinity and molecular weight. Hydrolytic degradation commenced with random chain scission of backbone ester bonds on the film surface and followed by loss of material due to surface erosion. In general, the perforated films degraded faster than the unperforated microthin films. Scanning electron microscopic images showed that surface erosion led to extensive formation of micropores, microcracks and increased in surface roughness.

A multiscale model for bioimpedance dispersion of liver tissue

Radio-frequency ablation (RFA) has been used in liver surgery to minimize blood loss during tissue division. However, the current RFA tissue division method lacks an effective way of determining the stoppage of blood flow. There is limitation on the current state-of-the-art laser Doppler flow sensor due to its small sensing area. A new technique was proposed to use bioimpedance for blood flow sensing. This paper discusses a new geometrical multiscale model of the liver bioimpedance incorporating blood flow impedance. This model establishes correlation between the physical tissue structure and bioimpedance measurement. The basic Debye structure within a multilevel framework is used in the model to account for bioimpedance dispersion. This dispersion is often explained by the Cole-Cole model that includes a constant phase element without physical explanation. Our model is able to account for reduced blood flow in its output with changes in permittivity in gamma dispersion that is mainly due to the polarization of water molecules. This study demonstrates the potential of a multiscale model in determining the stoppage of blood flow during surgery.

The potential of human fetal mesenchymal stem cells for off-the-shelf bone tissue engineering application

Mesenchymal stem cells (MSCs) have become one of the most promising cell sources for bone tissue engineering (BTE) applications. In this review, we first highlight recent progress in the understanding of MSC biology, their in vivo niche, multi-faceted contribution to fracture healing and bone re-modelling, and their role in BTE. A literature review from clinicaltrials.gov and Pubmed on clinical usage of MSC for both orthopedic and non-orthopedic indications suggests that translational use of MSC for BTE indications is likely to bear fruit in the ensuing decade. Last, we disscuss the profound influence of ontological and antomical origins of MSC on their proliferation and osteogenesis and demonstrated human fetal MSC (hfMSC) as a superior cellular candidate for off-the-shelf BTE applications. This relates to their superior proliferation capacity, more robust osteogenic potential and lower immunogenecity, as compared to MSC from perinatal and postnatal sources. Furthermore, we discuss our experience in developing a hfMSC based BTE strategy with the integrated use of bioreactor-based dynamic priming within macroporous scaffolds, now ready for evaluation in clinical trials. In conclusion, hfMSC is likely the most promising cell source for allogeneic based BTE application, with proven advantages compared to other MSC based ones.

Discontinuous release of bone morphogenetic protein-2 loaded within interconnected pores of honeycomb-like polycaprolactone scaffold promotes bone healing in a large bone defect of rabbit ulna

The choice of an appropriate carrier and its microarchitectural design is integral in directing bone ingrowth into the defect site and determining its subsequent rate of bone formation and remodeling. We have selected a three-dimensional polycaprolactone (PCL) scaffold with an interconnected honeycomb-like porous structure to provide a conduit for vasculature ingrowth as well as an osteoconductive pathway to guide recruited cells responding to a unique triphasic release of osteoinductive bone morphogenetic proteins (BMP) from these PCL scaffolds. We hypothesize that the use of recombinant human bone morphogenetic protein 2 (rhBMP2)-PCL constructs promotes rapid union and bone regeneration of a large defect. Results of our pilot study on a unilateral 15 mm mid-diaphyseal segmental rabbit ulna defect demonstrated enhanced bone healing with greater amount of bone formation and bridging under plain radiography and microcomputed tomography imaging when compared with an empty PCL and untreated group after 8 weeks postimplantation. Quantitative measurements showed significantly higher bone volume fraction and trabecular thickness, with lower trabecular separation in the rhBMP2-treated groups. Histology evaluation also revealed greater mature bone formation spanning across the entire scaffold region compared with other groups, which showed no bone regeneration within the central defect zone. We highlight that it is the uniqueness of the scaffold having a highly porous network of channels that promoted vascular integration and allowed for cellular infiltration, leading to a discontinuous triphasic BMP2 release profile that mimicked the release profile during natural repair mechanisms in vivo. This study serves as preclinical evidence demonstrating the potential of combining osteoinductive rhBMP2 with our PCL constructs for the repair of large defects in a large animal model.

Ibandronate does not reduce the anabolic effects of PTH in ovariectomized rat tibiae: a microarchitectural and mechanical study

Osteoporosis remains a challenging problem. Understanding the regulation on osteoclast and osteoblast by drugs has been of great interest. Both anabolic and anti-resorptive drugs yield positive results in the treatment of osteoporosis. However, whether the concurrent administration of parathyroid hormone (1-34) and ibandronate may offer an advantage over monotherapy is still unknown. This study, therefore, attempts to compare the efficacy of two therapeutical approaches and to investigate the beneficial effects in concurrent therapy in a rat model using three-point bending, pQCT and μCT analysis. A total of 60 female Sprague-Dawley rats of age 10 to 12 weeks were divided into 5 groups (SHAM, OVX+VEH, OVX+PTH, OVX+IBAN, OVX+PTH+IBAN) and subjected to ovariectomy or sham surgery accordingly. Low-dose parathyroid hormone (PTH) and/or ibandronate or its vehicle were administered subcutaneously to the respective groups starting from 4th week post-surgery at weekly intervals. Three rats from each group were euthanized every 2 weeks and their tibiae were harvested. The tibiae were subjected to metaphyseal three-point bending, pQCT and μCT analysis. Serum biomarkers for both bone formation (P1NP) and resorption (CTX) were studied. A total of 11 indices showed a significant difference between SHAM and OVX+VEH groups, suggesting the successful establishment of osteoporosis in the rat model. Compared to the previous studies which showed impedance from bisphosphonates in combination therapy with PTH, our study revealed that ibandronate does not block the anabolic effects of PTH in ovariectomized rat tibiae. Maximum load, strength-strain indices and serum bone formation markers of OVX+PTH+IBAN group are significantly higher than both monotherapy groups. With the proper ratio of anabolic and anti-resorptive drugs, the effect could be more pronounced.

Surface modification of PCL-TCP scaffolds in rabbit calvaria defects: Evaluation of scaffold degradation profile, biomechanical properties and bone healing patterns

Traditionally, polycaprolactone (PCL) based scaffolds tend to degrade at a slow rate. Pretreatment of polycaprolactone-20% tricalcium phosphate (PCL-TCP) scaffolds under alkaline conditions can be utilized to increase the degradation rate and improve mechanical properties. Three groups of PCL-TCP scaffolds with varying pretreatment exposures with sodium hydroxide (NaOH) were studied in a rabbit calvaria defect model and analyzed at 2, 4, 8, 12, and 24 weeks. (Group A: Untreated, Group B: 3 M NaOH/ 48 h and Group C: 3 M NaOH/96 h). Micro-CT analysis demonstrated that scaffolds with increased surface roughness (Groups B and C) showed a greater impact on the overall volume loss during the early healing period between 2 and 8 weeks as compared to the untreated group. In addition, greater bone formation was detected in NaOH treated scaffolds as compared to the untreated group throughout the experiment. Scaffolds with increased surface roughness generally reported higher push out test and compressive strength values from 4 to 8 weeks of early healing. Interestingly, the mechanical properties displayed a decline in values from 12 weeks onwards in the modified groups suggesting a favorable breakdown or weakening of PCL-TCP scaffolds tailored for replacement by new bone formation.

Neo-vascularization and bone formation mediated by fetal mesenchymal stem cell tissue-engineered bone grafts in critical-size femoral defects

Tissue-engineered bone grafts (TEBG) require highly osteogenic cell sources for use in fracture repair applications. Compared to other sources of mesenchymal stem cells (MSC), human fetal MSC (hfMSC) have recently been shown to be more proliferative and osteogenic. We studied the functional performance of hfMSC-mediated TEBG in 7 mm rat femoral critical-sized bone defects (CSD). Dynamically-cultured and osteogenically-primed hfMSC seeded onto macroporous poly-epsilon-caprolactone tri-calcium phosphate scaffolds were transplanted into CSDs. After 12 weeks, hfMSC-mediated TEBG induced 2.1x more new bone formation (43.3+/-10.5 vs. 21.0+/-7.4 mm(3), p<0.05), with greater compact and woven bone, and a 9.8x increase in stiffness (3.9+/-1.7 vs. 0.4+/-0.3 mNm/degree, p<0.05) compared to acellular scaffolds, such that only animals transplanted with TEBG underwent full fracture repair of the CSD. Although hfMSC survived for <4 weeks, by 4 weeks they were associated with a 3.9x larger vasculature network in the defect area (35.2+/-11.1 vs. 6.5+/-3.6 mm(3)p<0.05), suggesting an important role for hfMSC in the promotion of neo-vasculogenesis. We speculate that hfMSC-mediated healing of the CSD by stimulating neo-vascularization through as yet undetermined mechanisms. This proof-of-principle study demonstrates the utility of primitive MSC for bone regeneration, and may be of relevance to vascularization in other areas of regenerative medicine.

Superior osteogenic capacity for bone tissue engineering of fetal compared with perinatal and adult mesenchymal stem cells

Mesenchymal stem cells (MSCs) from human adult bone marrow (haMSCs) represent a promising source for bone tissue engineering. However, their low frequencies and limited proliferation restrict their clinical utility. Alternative postnatal, perinatal, and fetal sources of MSCs appear to have different osteogenic capacities, but have not been systematically compared with haMSCs. We investigated the proliferative and osteogenic potential of MSCs from human fetal bone marrow (hfMSCs), human umbilical cord (hUCMSCs), and human adult adipose tissue (hATMSCs), and haMSCs, both in monolayer cultures and after loading into three-dimensional polycaprolactone-tricalcium-phosphate scaffolds.Although all MSCs had comparable immunophenotypes, only hfMSCs and hUCMSCs were positive for the embryonic pluripotency markers Oct-4 and Nanog. hfMSCs expressed the lowest HLA-I level (55% versus 95%-99%) and the highest Stro-1 level (51% versus 10%-27%), and had the greatest colony-forming unit-fibroblast capacity (1.6x-2.0x; p < .01) and fastest doubling time (32 versus 54-111 hours; p < .01). hfMSCs had the greatest osteogenic capacity, as assessed by von-Kossa staining, alkaline phosphatase activity (5.1x-12.4x; p < .01), calcium deposition (1.6x-2.7x in monolayer and 1.6x-5.0x in scaffold culture; p < .01), calcium visualized on micro-computed tomography (3.9x17.6x; p < .01) and scanning electron microscopy, and osteogenic gene induction. Two months after implantation of cellular scaffolds in immunodeficient mice, hfMSCs resulted in the most robust mineralization (1.8x-13.3x; p < .01).The ontological and anatomical origins of MSCs have profound influences on the proliferative and osteogenic capacity of MSCs. hfMSCs had the most proliferative and osteogenic capacity of the MSC sources, as well as being the least immunogenic, suggesting they are superior candidates for bone tissue engineering.

Mandibular defect reconstruction using three-dimensional polycaprolactone scaffold in combination with platelet-rich plasma and recombinant human bone morphogenetic protein-2: de novo synthesis of bone in a single case

This publication describes the clinical case of a 71-year-old female patient. Using polycaprolactone (PCL) scaffold, platelet-rich plasma (PRP) and recombinant human bone morphogenetic protein-2 (rhBMP-2), a critical-sized defect in the anterior mandible was regenerated using de novo-grown bone. A bacterial infection had caused a periimplantitis in two dental implants leading to a large destruction in the anterior mandible. Both implants were removed under antibiotic prophylaxis. A PCL scaffold was prepared especially for this clinical case. In a second procedure with antibiotic prophylaxis, the bony defect was reopened. The PCL scaffold was fitted and charged with PRP and rhBMP-2 (1.2 mg). After complication-free wound healing, the radiological control demonstrated de novo-grown bone in the anterior mandible 6 months postoperatively. Dental implants were inserted in a third operation. A bone biopsy of the newly grown bone, as well as of the bordering local bone, was taken and histologically examined. The bone samples were identical and presented vital laminar bone.

Development of dual-compartment perfusion bioreactor for serial coculture of hepatocytes and stellate cells in poly(lactic-co-glycolic acid)-collagen scaffolds

An important challenge in liver tissue engineering is to overcome the rapid loss of hepatocyte functions. In vivo, hepatocytes are compact polyhedral cells with round nuclei; however, they readily loss many of their differentiated functions in vitro. To overcome this challenge, we have established a new perfusion bioreactor that consists of two compartments which enabled the serial coculture of hepatocytes and hepatic stellate cells-T6 without direct contact between each other. Three dimensional scaffolds were utilized in the bioreactor as physical anchors for cells. The scaffolds consist of collagen grafted poly(lactic-co-glycolic acid) microfibers and cross-linked collagen sponges between microfibers for additional cellular support and adhesion. The advantages of this new bioreactor are enabling cell culture in three dimensional organization and controlling the culture parameters of the supporting cells independently from the hepatocytes. The results showed that the hepatocytes exhibited much higher levels of the differentiated functions such as albumin secretion, urea synthesis, and cytochrome P450 enzymatic activity when compared with the monoculture system where hepatocytes alone were cultured. This perfusion bioreactor system has potential applications in the development of bioartificial liver devices or cell-based tissue constructs transplantation therapies.

The degradation profile of novel, bioresorbable PCL-TCP scaffolds: an in vitro and in vivo study

Degradation studies of scaffolds are important in bone tissue engineering. Previously, novel poly(epsilon-caprolactone)-20% tricalcium phosphate (PCL-TCP) based scaffolds were developed and proven useful for bone regeneration. In this study in vitro degradation analyses were carried out with the PCL-TCP scaffolds immersed in standard culture medium for 24 weeks. In vivo degradation was performed with the scaffolds implanted in the abdomen of rats for the same period of time. Results demonstrated greater degradation of PCL-TCP scaffolds in vivo than in vitro. At 24 weeks, the increase of average porosity of the scaffolds in vivo was 29.2% compared to 2.65% in vitro. Gel permeation chromatography (GPC) analysis revealed a decrease of 29% and 20% respectively in the Mn and Mw values after 24 weeks in vitro. However, a significant decrease in Mn and Mw values (79.6% and 88.7% respectively) were recorded in vivo. The mechanical properties however, were relatively similar and closely match those of cancellous bone even at 24 weeks. The results showed that the scaffold can be used for dentoalveolar reconstruction and PCL-TCP scaffolds have shown to possess the potential to degrade within the desired time period of 5-6 months and favorable mechanical properties.

Heterogeneous meshing and biomechanical modeling of human spine

We aim to develop a patient-specific biomechanical model of human spine for the purpose of surgical training and planning. In this paper, we describe the development of a finite-element model of the spine from the VHD Male Data. The finite-element spine model comprises volumetric elements suitable for deformation and other finite-element analysis using ABAQUS. The mesh generation solution accepts segmented radiological slices as input, and outputs three-dimensional (3D) volumetric finite element meshes that are ABAQUS compliant. The proposed mesh generation method first uses a grid plane to divide the contours of the anatomical boundaries and its inclusions into discrete meshes. A grid frame is then built to connect the grid planes between any two adjacent planes using a novel scheme. The meshes produced consist of brick elements in the interior of the contours and with tetrahedral and wedge elements at the boundaries. The nodal points are classified according to their materials and hence, elements can be assigned different properties. The resultant spine model comprises a detailed model of the 7 cervical vertebrae, 12 thoracic vertebrae, 5 lumbar vertebrae, and S1. Each of the vertebrae and intervertebral disc has between 1200 and 6000 elements, and approximately 1200 elements, respectively. The accuracy of the resultant VHD finite element spine model was good based on visual comparison of volume-rendered images of the original CT data, and has been used in a computational analysis involving needle insertion and static deformation. We also compared the mesh generated using our method against two automatically generated models; one consists of purely tetrahedral elements and the other hexahedral elements.

Alterations of human acellular tissue matrix by gamma irradiation: Histology, biomechanical property, stability,in vitro cell repopulation, and remodeling

AlloDerm, a processed acellular human tissue matrix, is used in a number of surgical applications for tissue repair and regeneration. In the present work, AlloDerm serves as a model system for studying gamma radiation-induced changes in tissue structure and stability as well as the effect of such changes on the cell-matrix interactions, including cell repopulation and matrix remodeling. AlloDerm tissue matrix was treated with 2-30 kGy gamma irradiation at room temperature. Gamma irradiation reduced the swelling of tissue matrix upon rehydration and caused significant structural modifications, including collagen condensation and hole formation in collagen fibres. The tensile strength of AlloDerm increased at low gamma dose but decreased with increasing gamma dosage. The elasticity of irradiated AlloDerm was reduced significantly. Calorimetric study showed that gamma irradiation destabilized the tissue matrix, resulting in greater susceptibility to proteolytic enzyme degradation. Although gamma irradiation did not affect in vitro proliferation of fibroblast cells, it promoted tissue degradation upon cell repopulation and influenced synthesis and deposition of new collagen.