Evaluating Burning Mouth Syndrome as a Comorbidity of Atypical Odontalgia: The Impact on Pain Experiences

OBJECTIVE

This study aimed (1) to investigate the differences in clinical characteristics of patients between 2 groups, those who have atypical odontalgia (AO) only and those who have AO with burning mouth syndrome (BMS), and (2) to assess the influence of psychiatric comorbidity factors on patients' experiences.

METHOD

Medical records and psychiatric referral forms of patients visiting the Psychosomatic Dentistry Clinic of Tokyo Medical and Dental University between 2013 and 2016 were reviewed. The final sample included 2 groups of 355 patients: those who have AO only (n = 272) and those who have AO with BMS (AO-BMS; n = 83). Clinicodemographic variables (gender, age, comorbid psychiatric disorders, and history of headache or sleep disturbances) and pain variables (duration of illness, pain intensity, and severity of accompanying depression) were collected. Initial pain assessment was done using the Short-Form McGill Pain Questionnaire, and depressive state was determined using the Zung Self-Rating Depression Scale.

RESULTS

The average age, female ratio, and sleep disturbance prevalence in the AO-only group were significantly lower than those in AO-BMS group. AO-BMS patients rated overall pain score and present pain intensity significantly higher than did the AO-only patients (P = 0.033 and P = 0.034, respectively), emphasizing sharp (P = 0.049), hot-burning (P = 0.000), and splitting (P = 0.003) characteristics of pain. Patients having comorbid psychiatric disorders had a higher proportion of sleep disturbance in both groups and a higher proportion of depressive state in the AO-only group.

CONCLUSIONS

AO-BMS patients have different epidemiological characteristics, sleep quality, and pain experiences compared to AO-only patients. The presence of psychiatric comorbidities in both groups may exacerbate sleep quality. We suggest that BMS as a comorbid oral disorder in AO patients contributes to a more intensively painful experience.

Relationship between the length of the forefoot bones and performance in male sprinters

Although recent studies have reported that the forefoot bones are longer in sprinters than in non-sprinters, these reports included a relatively small number of subjects. Moreover, while computer simulation suggested that longer forefoot bones may contribute to higher sprint performance by enhancing plantar flexor moment during sprinting, the correlation between forefoot bone length and sprint performance in humans has not been confirmed in observational studies. Thus, using a relatively large sample, we compared the length of the forefoot bones between sprinters and non-sprinters. We also examined the relationship between forefoot bone length and performance in sprinters. The length of forefoot bones of the big and second toes in 36 well-trained male sprinters and 36 male non-sprinters was measured using magnetic resonance imaging. The length of forefoot bones in the big and second toes was significantly longer in sprinters than in non-sprinters. After dividing the sprinters into faster and slower groups according to their personal best time in the 100-m sprint, it was found that the forefoot bone length of the second toe, but not that of the big toe, was significantly longer in faster group than in slower group. Furthermore, the forefoot bone length of the second toe correlated significantly with the personal best time in the 100-m sprint. This study supported evidence that the forefoot bones are longer in sprinters than in non-sprinters. In addition, this is the first study to show that longer forefoot bones may be advantageous for achieving superior sprint performance in humans.

Ischemic Preconditioning Enhances Muscle Endurance during Sustained Isometric Exercise

Ischemic preconditioning (IPC) enhances whole-body exercise endurance. However, it is poorly understood whether the beneficial effects originate from systemic (e. g., cardiovascular system) or peripheral (e. g., skeletal muscle) adaptations. The present study examined the effects of IPC on local muscle endurance during fatiguing isometric exercise. 12 male subjects performed sustained isometric unilateral knee-extension exercise at 20% of maximal voluntary contraction until failure. Prior to the exercise, subjects completed IPC or control (CON) treatments. During exercise trial, electromyography activity and near-infrared spectroscopy-derived deoxygenation in skeletal muscle were continuously recorded. Endurance time to task failure was significantly longer in IPC than in CON (mean±SE; 233±9 vs. 198±9 s, P<0.001). Quadriceps electromyography activity was not significantly different between IPC and CON. In contrast, deoxygenation dynamics in the quadriceps vastus lateralis muscle was significantly faster in IPC than in CON (27.1±3.4 vs. 35.0±3.6 s, P<0.01). The present study found that IPC can enhance muscular endurance during fatiguing isometric exercise. Moreover, IPC accelerated muscle deoxygenation dynamics during the exercise. Therefore, we suggest that the origin of beneficial effects of IPC on exercise performance may be the enhanced mitochondrial metabolism in skeletal muscle.

Topochemical conversion of a dense metal-organic framework from a crystalline insulator to an amorphous semiconductor

A dense, insulating metal–organic framework (MOF), is successfully converted into a semiconducting amorphous MOF via a topochemical route.

The topochemical conversion of a dense, insulating metal–organic framework (MOF) into a semiconducting amorphous MOF is described. Treatment of single crystals of copper(i) chloride trithiocyanurate, Cu^ICl(ttcH₃) (ttcH₃ = trithiocyanuric acid), 1, in aqueous ammonia solution yields monoliths of amorphous Cu^I_1.8(ttc)_0.6(ttcH₃)_0.4, 3. The treatment changes the transparent orange crystals of 1 into shiny black monoliths of 3 with retention of morphology, and moreover increases the electrical conductivity from insulating to semiconducting (conductivity of 3 ranges from 4.2 × 10^–11 S cm^–1 at 20 °C to 7.6 × 10^–9 S cm^–1 at 140 °C; activation energy = 0.59 eV; optical band gap = 0.6 eV). The structure and properties of the amorphous conductor are fully characterized by AC impedance spectroscopy, X-ray photoelectron spectroscopy, X-ray pair distribution function analysis, infrared spectroscopy, diffuse reflectance spectroscopy, electron spin resonance spectroscopy, elemental analysis, thermogravimetric analysis, and theoretical calculations.

Aggregatibacter actinomycetemcomitans lipopolysaccharide stimulated epithelial cells produce interleukin-15 that regulates T cell activation

OBJECTIVE

Oral epithelial cells act not only as mechanical barriers but also as immunological barriers by producing various mediators such as cytokines. Since, in periodontal disease, limited information is available regarding the role of oral epithelial cell-derived cytokines on T cell activation, we investigated the responses of human T cells (Jurkat cell) to cytokines in KB cells (an oral epithelial cell line) that had been stimulated with Aggregatibacter actinomycetemcomitans lipopolysaccharide (LPS).

DESIGN

To evaluate T cell activation in response to the culture supernatant of KB cells, we examined cell proliferation and interferon gamma (IFN-γ) production, which is closely related to periodontal disease, in Jurkat cells. Culture supernatant of LPS-stimulated KB cells enhanced cell proliferation and IFN-γ production in Jurkat cells. To determine the active component within the culture supernatant, the production of epithelial cell-derived cytokines, interleukin-12 (IL-12), IL-15 and IL-18, in LPS-stimulated KB cells was analysed.

RESULTS

IL-15, but not IL-18, was significantly increased in the culture supernatant of LPS-stimulated KB cells. Moreover, additional anti-IL-15 neutralizing antibody abolished culture supernatant-induced IFN-γ expression in Jurkat cells.

CONCLUSION

These results suggest that periodontal pathogens induce the production of IL-15 from epithelial cells, and leading the activation of T cells in periodontal lesions.

Visualization of Flow Instabilities for High Density Polyethylene

Two typical flow instabilities of “Shark Skin” and “Melt Fracture” for high density polyethylene were investigated in this report. Experimental measurements were carried out methodically in a wide flow region from the reservoir (entry region) to the die land with a specific slit die. Especially the flow pattern was visualized with a high speed camera and the frequency of the flow instability was analyzed. Corresponding to the visualization analysis, the pressure fluctuation in the slit die and the surface roughness at the die exit were measured simultaneously and these frequency characteristics were analyzed with a FFT (Fast Fourier Transform) analyzer. As for “Shark Skin” region, the irregularity of the surface roughness in the broad frequency band was recognized at the die exit. In spite of this surface roughness, the pressure fluctuation and the fluctuation of the flow pattern at the wall vicinity in the die land were not observed. These results indicate that “Shark Skin” occurs at the die exit. As for “Melt Fracture” region, the periodical oscillation of the flow pattern and the periodical pressure fluctuation which corresponded to the periodical distortion of the extrudate was recognized in the die land. However the periodical oscillation of the flow pattern and the periodical pressure fluctuation could not be recognized in the reservoir (entry region of the die land). These results indicate that “Melt Fracture” is initiated at the die entry and occurs in the die land. Consequently it is clarified that “Shark Skin” occurs at the die exit and the flow instability which lead to “Melt Fracture” is initiated at the die entry and occurs in the die land.

Quantitative Analysis for Polymer Degradation in the Extrusion Process

Polymer degradation in the extrusion process decreases quality and productivity. For this reason, it is necessary to prevent polymer degradation. In the extrusion process, polymer degradation is caused by oxidation. It depends on the processing temperature and the amount of dissolved oxygen in the molten polymer. Therefore, a quantitative analysis of these factors is required.

As for the degradation characteristics of the material used in this study, temperature and oxygen concentration dependency of the oxidation rate could be quantitatively characterized with an apparatus to evaluate polymer degradation which utilized chemiluminescence generated by an oxidation reaction.

Moreover, an online measuring apparatus to analyze dissolved gas in the extruded molten polymer was developed. With this apparatus, the volume ratio of dissolved gases (N2, O2 etc.) to the extruded molten polymer could be quantitatively analyzed and the quality of the extruded molten polymer evaluated.

With this apparatus, dissolved nitrogen (an index of entrained air) was analyzed with a full-flight screw and a barrier screw. Furthermore, observation of cross sectional views in the screw channel obtained from the cooling experiment under the operating conditions was carried out for the full-flight screw and the barrier screw. With the full-flight screw, break up phenomenon (collapse of solid polymer) occurred in the screw channel and the amount of nitrogen increased. With the barrier screw, the amount of nitrogen decreased because of prevention of the break up phenomenon in the screw channel.

Consequently, it is shown that the use of the barrier screw is suitable for oxygen reduction in the molten polymer, which is a factor in causing polymer degradation.

Azithromycin may inhibit interleukin-8 through suppression of Rac1 and a nuclear factor-kappa B pathway in KB cells stimulated with lipopolysaccharide

BACKGROUND

Recent studies have shown that the 15-member macrolide antibiotic azithromycin (AZM) not only has antibacterial activity, but also results in the role of immunomodulator. Interleukin (IL)-8 is an important inflammatory mediator in periodontal disease. However, there have been no reports on the effects of AZM on IL-8 production from human oral epithelium. Therefore, we investigated the effects of AZM on IL-8 production in an oral epithelial cell line.

METHODS

KB cells were stimulated by Escherichia coli or Aggregatibacter actinomycetemcomitans (previously Actinobacillus actinomycetemcomitans) lipopolysaccharide (LPS) with or without AZM. IL-8 mRNA and protein expression and production in response to LPS were analyzed by quantitative polymerase chain reaction, flow cytometry, and enzyme-linked immunosorbent assay. The activation of nuclear factor-kappa B (NF-κB) and Rac1, which is important for IL-8 expression, was analyzed by enzyme-linked immunosorbent assay and Western blotting, respectively.

RESULTS

IL-8 mRNA expression, IL-8 production, and NF-κB activation in LPS-stimulated KB cells were inhibited by the addition of AZM. LPS-induced Rac1 activation was also suppressed by AZM.

CONCLUSIONS

This study suggests that AZM inhibits LPS-induced IL-8 production in an oral epithelial cell line, in part caused by the suppression of Rac1 and NF-κB activation. The use of AZM might provide possible benefits in periodontal therapy, with respect to both its antibacterial action and apparent anti-inflammatory effect.

Molecular cloning of a structural homolog of YY1AP, a coactivator of the multifunctional transcription factor YY1

YY1 is a multifunctional transcription factor that activates or represses gene transcription depending on interactions with other regulatory proteins that include coactivator YY1AP. Here, we describe the cloning of a novel homolog of YY1AP, referred to as YARP, from the human neuroblastoma cell line SK-N-SH. The cloned cDNA encoded a 2240 amino acid protein that contained a domain which was 97% homologous to an entire YY1AP sequence of 739 amino acids. Two splice variants, YARP2 and YARP3, were also cloned. Northern blotting demonstrated the YARP mRNA (approximately 10 kb), which was increased 1.7-fold after dibutyryl cAMP-induced neural differentiation of the cells. Presence of YARP mRNA was also confirmed in human tissues such as the heart, brain and placenta. Bioinformatic analysis predicted various functional motifs in the YARP structure, including nuclear localization signals and domains associated with protein-protein interactions (PAH2), DNA-binding (SANT), and chromatin assembly (nucleoplasmin-like), outside the YY1AP-homology domain. Thus, we propose that YARP is multifunctional and plays not only a role analogous to YY1AP, but also its own specific roles in DNA-utilizing processes such as transcription.

Cloning and expression analysis of YY1AP-related protein in the rat brain

YY1AP-related protein (YARP) is a structural homolog of YY1AP, a transcriptional coactivator of the multifunctional transcription factor YY1. We cloned a rat YARP cDNA that encoded a 2256 amino acid protein with 93% homology to the human counterpart. Northern blots revealed significant expression of the YARP gene in the rat brain. In situ hybridization demonstrated its expression in neurons throughout the brain, including pyramidal cells in the cerebral cortex and hippocampus and granule cells in the dentate gyrus. YARP was coexpressed with YY1 in these same neuronal cells. However, there was no evidence of YARP expression in glia. In the developing rat brain, the level of YARP mRNA ( approximately 10 kb) peaked at embryonic day 18 and promptly declined thereafter to reach the steady-state level found in adulthood, by 14 days after birth. These results suggest that YARP functions at a late stage of neurogenesis during perinatal development of the rat brain, as well as in mature neurons.