The Impact of COVID-19 on SARSCoV-2-Negative Elderly Patients with Hip Fractures: A Single-Center Retrospective Study from Shanghai, China

Purpose

Coronavirus disease 2019 (COVID-19) has brought an unprecedented change in wellbeing globally. The spread of the pandemic reportedly reduced the incidence of activity-related trauma, while that of fragility fractures remained stable. Here, we aimed to identify the risk factors associated with the prognosis of SARS-CoV-2 negative elderly patients with hip fractures.

Patients and Methods

This retrospective study included elderly patients with hip fractures between 1st January and 9th May during the COVID-19 pandemic (Experiment group) and the same period from 2017 to 2019 (Control group). Perioperative mortality, complications, and functional recovery were compared between two groups of different time frame in the total cohort and patients who received surgical treatment. Multiple linear regression was carried out to identify the risk factors influencing the prognosis of COVID-negative elderly patients with hip fractures.

Results

The proportion of patients with admission time less than 24 hours and the 6-month postoperative Parker score were significantly decreased during COVID-19 compared with the pre-COVID-19 period (p < 0.001). Multiple linear regression demonstrated that TTA (defined as time from injury to admission), rehabilitation after discharge and outpatient follow-up were associated with the 6-month Parker score in the total population (p < 0.001) and in patients who received surgical treatment (p < 0.001).

Conclusion

Elderly patients with hip fractures had a poorer prognosis in epidemic period despite being COVID-19 negative. Factors including timely admission, postoperative follow-up, and rehabilitation could optimize safety and significantly improve the prognosis of elderly COVID-19 negative patients with hip fractures, even during a pandemic.

The Port Delivery System with ranibizumab: a new paradigm for long-acting retinal drug delivery

The Port Delivery System with ranibizumab (PDS) is an innovative intraocular drug delivery system designed for the continuous delivery of ranibizumab into the vitreous for 6 months and beyond. The PDS includes an ocular implant, a customized formulation of ranibizumab, and four dedicated ancillary devices for initial fill, surgical implantation, refill-exchange, and explantation, if clinically indicated. Ranibizumab is an ideal candidate for the PDS on account of its unique physicochemical stability and high solubility. Controlled release is achieved via passive diffusion through the porous release control element, which is tuned to specific drug characteristics to accomplish a therapeutic level of ranibizumab in the vitreous. To characterize drug release from the implant, release rate was measured in vitro with starting concentrations of ranibizumab 10, 40, and 100 mg/mL, with release of ranibizumab 40 and 100 mg/mL found to remain quantifiable after 6 months. Using a starting concentration of 100 mg/mL, active release rate at approximately 6 months was consistent after the initial fill and first, second, and third refills, demonstrating reproducibility between implants and between multiple refill-exchanges of the same implant. A refill-exchange performed with a single 100-µL stroke using the refill needle was shown to replace over 95% of the implant contents with fresh drug. In vitro data support the use of the PDS with fixed refill-exchange intervals of at least 6 months in clinical trials.

Dam-induced difference of invasive plant species distribution along the riparian habitats

Riparian ecosystem is structurally unstable due to the frequent disturbances from water fluctuation. Moreover, dams on large rivers tend to trigger fundamental changes of the composition and structure of riparian plant communities, which provides high odds for invasive species to colonize. Yet, how the invasive species distribute along a dam-induced riparian habitat, and how the native species resist to plant invasion are still puzzles. In this study, we investigated spatial distribution of invasive floral species and its correlation with the distance from dam and the dam-triggered flooding stresses, as well as the resistance of native species to plant invasion in the water level fluctuation zone (WLFZ) of the Three Gorges Reservoir (TGR) along the Yangtze River. By our investigation, a total of 43 alien plant species belonging to 14 families and 34 genera were found, including 20 existed and 23 newly discovered alien species recorded. Most of the new invasive species are annual herbs of the Asteraceae family. At the current successional stage, the new invasive species had not yet fully occupied the habitats of the existed invasive species. Longitudinally, number and coverages of the new invasive species showed an opposite distribution pattern to the existed invasive species, but vertically they demonstrated similar pattern. Currently, the new dominant invasive species are mainly concentrated at the intermediate elevation of WLFZ in the middle section of the reservoir, whereas the existed dominant invasive species have proliferated across the whole WLFZ. Additionally, native species showed a weak resistance to plant invasion, and water fluctuation along the elevation exerted the most significant influence on plant invasion. The results indicated that, after a decade of riparian community succession, the invasiveness of alien species remain persisted. The potential penetration site of the invasion may locate at the intermediate section along the vertical and longitudinal dimension.

A novel hierarchical biofunctionalized 3D-printed porous Ti6Al4V scaffold with enhanced osteoporotic osseointegration through osteoimmunomodulation

Background

Femoral stem of titanium alloy has been widely used for hip arthroplasty with considerable efficacy; however, the application of this implant in patients with osteoporosis is limited due to excessive bone resorption. Macrophages participate in the regulation of inflammatory response and have been a topic of increasing research interest in implant field. However, few study has explored the link between macrophage polarization and osteogenic–osteoclastic differentiation. The present study aims to develop a novel hierarchical biofunctionalized 3D-printed porous Ti6Al4V scaffold with enhanced osteoporotic osseointegration through immunotherapy.

Method

To improve the osteointegration under osteoporosis, we developed a hierarchical biofunctionalized 3D-printed porous Ti6Al4V scaffold (PT). Biomimetic extracellular matrix (ECM) was constructed inside the interconnected pores of PT in micro-scale. And in nano-scale, a drug cargo icariin@Mg-MOF-74 (ICA@MOF) was wrapped in ECM-like structure that can control release of icariin and Mg²⁺.

Results

In this novel hierarchical biofunctionalized 3D-printed porous Ti6Al4V scaffold, the macroporous structure provides mechanical support, the microporous structure facilitates cell adhesion and enhances biocompatibility, and the nanostructure plays a biological effect. We also demonstrate the formation of abundant new bone at peripheral and internal sites after intramedullary implantation of the biofunctionalized PT into the distal femur in osteoporotic rats. We further find that the controlled-release of icariin and Mg²⁺ from the biofunctionalized PT can significantly improve the polarization of M0 macrophages to M2-type by inhibiting notch1 signaling pathway and induce the secretion of anti-inflammatory cytokines; thus, it significantly ameliorates bone metabolism, which contributes to improving the osseointegration between the PT and osteoporotic bone.

Conclusion

The therapeutic potential of hierarchical PT implants containing controlled release system are effective in geriatric orthopaedic osseointegration.

Graphical Abstract

Supplementary Information

The online version contains supplementary material available at 10.1186/s12951-022-01277-0.

The Effect of Vertical and Oblique Inclinations on Fracture Stability and Reoperation Risks in Femoral-Neck Fractures of Nongeriatric Patient

Background: For nongeriatric patients with femoral neck fractures (FNFs), preoperative evaluation of fracture three-dimensional inclination is essential to identify fracture stability, select appropriate fixation strategies, and improved clinical prognoses. However, there is lack of evaluation system which takes into account both vertical and oblique inclinations. The purpose of this study was to comprehensively investigate the effect of vertical and oblique inclinations on fracture stability and reoperation risks.

Methods: We retrospectively reviewed the medical records of 755 FNFs patients with over 2 years follow-up. The 3-D inclination angle in vertical (α) and oblique plane (β) were measured based on CT images. The optimal threshold for unstable 3-D inclination were identified by seeking the highest Youden Index in predicting reoperation and validated in the biomechanical test. According to the cut-off value proposed in the diagnostic analysis, forty-two bone models were divided into seven groups, and were all fixed with traditional three parallel screws. Interfragmentary motion (IFM) was used for comparison among seven groups. The association between reoperation outcome and 3-D inclination was analysed with a multivariate model.

Results and Conclusion: The overall reoperation rate was 13.2%. Unstable 3-D inclination angles with an optimally determined Youden index (0.39) included vertical (α > 70°) and oblique (50°<α < 70° and β > 20°/β < −20°) types. Biomechanical validation showed these fractures had significantly greater (p < 0.05) interfragmentary motion (1.374–2.387 mm vs. 0.330–0.681 mm). The reoperation rate in 3-D unstable group (32.7%) is significantly (p < 0.001) higher than that in 3-D stable group (7.9%). Multivariate analysis demonstrated that 3-D inclination angle was significantly (OR = 4.699, p < 0.001) associated with reoperation. FNFs with α > 70°; 50°<α < 70° and β > 20°/β < −20° are real unstable types with significantly worse interfragmentary stability and higher reoperation risks. Fracture inclination in vertical and oblique planes is closely related to reoperation outcomes and may be a useful complement to the way FNFs are currently evaluated.

Preliminary outcomes of the combination of demineralized bone matrix and platelet Rich plasma in the treatment of long bone non-unions

Background

A variety of bone graft substitutes have been introduced into the treatment of bone non-unions. However, clinical outcomes from current evidences are various and conflicting. This study aimed to present the preliminary outcomes of a treatment protocol in which the combination of demineralized bone matrix (DBM) and platelet rich plasma (PRP) was used as a bone graft substitute for long bone non-unions.

Methods

Data of this retrospective study were reviewed and collected from a consecutive case series involving 43 patients who presented with a long bone non-union and were treated in our department from October 2018 to May 2019. The combination of DMB and PRP was applied as a bone defect filler in 16 patients, whilst the other 27 patients were treated with iliac bone autografting. Patients’ demographics, postoperative complications and the result of bone union were compared and evaluated.

Results

The demographic data between the two groups were comparable. No significant difference was found with regard to the incidence of postoperative complications. No graft rejection, heterotopic ossification or other complications were noted. The distribution of bony healing time was rather scattered but did not differ significantly between the groups (7.533 ± 3.357 months vs. 6.625 ± 2.516 months; P=0.341). Union was identified radiographically in 15 of 16 patients in the DBM+PRP group and in 24 of 27 patients in autograft group.

Conclusions

The present study identified that low incidence of postoperative complications and satisfactory bony healing rate could be achieved in the treatment of long bone non-unions augmented with the combination of DBM and PRP. Although these findings might indicate the promising future of this treatment protocol, larger and higher quality studies should also be executed to assess its routine use.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12891-021-04840-2.

Fixation effects of different types of cannulated screws on vertical femoral neck fracture: A finite element analysis and experimental study

Femoral neck fractures (FNFs) in young patients usually result from high-energy violence, and the vertical transcervical type is typically challenging for its instability. FNFs are commonly treated with three cannulated screws (CS), but the role of screws type on fixation effects (FE) is unclear. The purpose of this study was to evaluate the FE of ten types of CS with different diameters, lengths, depths, and pitches of thread via finite element analysis which was validated by a biomechanical test. Ten vertical FNF models were grouped, fixed by ten types of CS, respectively, all in a parallel, inverted triangular configuration. Their FE were scored comprehensively from six aspects via an entropy evaluation method, as higher scores showed better results. For partial-thread screws, thread length and thread shape factor (TSF) are determinative factors on stability of FNF only if thread depth is not too thick, and they have less cut-out risk, better compression effects and better detached resistance of fracture than full-thread screws, whereas full-thread screws appear to have better shear and shortening resistance. A combination of two superior partial-thread screws and one inferior full-thread screw for vertical FNF may get optimal biomechanical outcomes. The type of cannulated screw is important to consider when treating vertical FNF.

Long-term differences in clinical prognosis between crossed- and parallel-cannulated screw fixation in vertical femoral neck fractures of non-geriatric patients

BACKGROUND AND PURPOSE

Vertical femoral neck fractures (VFNFs) are one of the most difficult fractures to stabilize, with high non-union (17%), avascular necrosis (AVN, 21%), and femoral neck shortening (FNS, 29.0%) rates. The objective of this investigation was to directly compare the long-term clinical complication rates of VFNFs repaired by crossed (Alpha fixation) or parallel screws in non-geriatric patients.

PATIENTS AND METHODS

We conducted a retrospective comparative study of VFNFs in patients (<60 years) between January 2014 and December 2017, with at least 2 years of follow-up. VFNFs were fixed with either three parallel screws (G-TRI) or augmented with a crossed screw (G-ALP). Confounding variables included age, gender, initial displacement, ISS (Injury Severity Score), general comorbidities, combined fractures, Pauwels angle, reduction quality. Complications, including non-union, AVN of the femoral head and FNS were compared as outcome indicators. Risk factors associated with these variables were further analysed using multivariate analysis.

RESULTS

A total of 157 patients (97 G-TRI; 60 G-ALP) met inclusion criteria. G-ALP had a significantly lower rate of FNS (8.3% vs. 28.9%, p = 0.039) than that of G-TRI. non-union (3.3% vs. 11.3%), AVN (21.7% vs. 25.8%), and reoperation rates (21.7% vs. 23.7%) were lower in G-ALP than G-TRI but was not statistically significant. Multivariate analyses showed significant relationships between NU and unacceptable reduction quality (OR=7.610; 1.823-31.770, adjusted-p = 0.015); between AVN and initial displacement (Garden III and IV) (OR=7.885; 1.739-35.744, adjusted-p = 0.021); and between FNS and screw configuration (OR=5.713; 1.839-17.743, adjusted-p = 0.009).

CONCLUSION

For the treatment of VFNFs, satisfactory reduction still remains the key surgical goal that prevents NU, while the incidence of AVN strongly depends on the initial displacement at the time of injury. Crossed screws were associated with a markedly lower FNS rate than parallel screws, which promote further randomised controlled trials to establish a guideline for optimal fixation selection in VFNFs.

Fatigue behaviour and biocompatibility of additively manufactured bioactive tantalum graded lattice structures for load-bearing orthopaedic applications

Laser powder bed fusion (LPBF) additive manufacturing of pure tantalum and their graded lattice structures was systematically investigated, with emphasis on their microstructure evolution, phase formation, surface energy and biological properties in comparison with conventionally forged pure Ta. The LPBF fabricated Ta (LPBF-Ta) exhibited lower contact angles and higher surface energy than the forged-Ta which indicated the better wettability of the LPBF-Ta. The adhesion and proliferation of rat bone marrow stromal cells (rBMSCs) were also enhanced for the LPBF-Ta when compared to forged-Ta. Three different Ta graded gyroid lattice structures (i.e., uniform structure, Y-gradient structure, Z-gradient structure) were designed and fabricated using the same optimised LPBF parameters. Y-gradient structures exhibited the best plateau stress and compressive modulus among three different graded structures due to the maximum local volume fraction on the fracture plane. In fatigue response, Y-gradient outperformed the other two gyroid structures under varying stresses. In terms of cell culture response, the uniform structures performed the best biocompatibility due to its suitable pore size for cell adhesion and growth. This study provides new and in-depth insights into the LPBF additive manufacturing of pure Ta graded lattice structures with desired fatigue and biological properties for load-bearing orthopaedic applications.

[Determination of Salt Forms of New Psychoactive Substances by Ion Chromatography]

Objective To establish an ion chromatography method for the salt form determination of new psychoactive substances （NPS）. Methods The method of conducting qualitative and quantitative analysis of six types of organic acid ions （acetate ion, tartrate ion, maleate ion, oxalate ion, fumarate ion, citrate ion） and five types of inorganic anions （fluoride ion, chloride ion, nitrate ion, sulfate ion, phosphate ion） in NPS sample by ion chromatography was developed. The salt forms of 222 seized NPS samples （103 samples with synthetic cannabinoids, 81 samples with cathinones, 44 samples with phenylethylamines, 12 samples with tryptamines, 7 samples with phencyclidines, 6 samples with piperazines, 2 samples with aminoindenes, 26 samples with fentanyls and 43 samples with other types of NPS） were analyzed by this method. Results Each anion had good linearity in the corresponding linear range, the correlation coefficients （r） were greater than 0.999, the limits of detection were 0.01-0.05 mg/L, and the limits of quantitative were 0.1-0.5 mg/L. Except that 5F-BEPIRAPIM was hydrochloride, the salt forms of the other 102 synthetic cannabinoids were all base. The salt form of 81 cathinone samples, 44 phenylethylamine samples, 7 phencyclidine samples and 2 aminoindene samples were all hydrochloride. The salt forms of tryptamine samples included base, hydrochloride, fumarate and oxalate. The salt forms of piperazine samples included base and hydrochloride. The salt forms of fentanyl samples and samples of other types included base, hydrochloride and citrate. Conclusion Ion chromatography is a simple, accurate and efficient method for determining the salt form of NPS samples, which makes the qualitative and quantitative conclusions of NPS more scientific and rigorous.

[Identification of Synthetic Cannabinoid 5F-EDMB-PICA in Suspicious Herbal Products]

Objective To study the qualitative analysis strategy for unknown synthetic cannabinoid in the suspicious herbal product when no reference substance is available. Methods The synthetic cannabinoid in herbal blend was extracted with methanol. The extract was concentrated by rotary evaporator and separated and purified by preparative liquid chromatography, to obtain high purity synthetic cannabinoid sample. Gas chromatography-mass spectrometry （GC-MS）, ultra-high performance liquid chromatography-quadrupole time-of-flight mass spectrometry （UPLC-QTOF-MS） and nuclear magnetic resonance （NMR） were used to determine the structure of the prepared compound. Results High purity unknown sample （10 mg） was obtained by preparative liquid chromatography. The sample was analyzed by GC-MS, UPLC-TOF-MS and NMR, and through spectrum analysis, the unknown synthetic cannabinoid was determined as 5F-EDMB-PICA. Conclusion The method to extract unknown synthetic cannabinoid from low content herbal products by preparative liquid chromatography was established, and the structure of the unknown sample was identified by comprehensive use of GC-MS, UPLC-QTOF-MS and NMR. The information will assist forensic laboratories in identifying this substance or other compounds with similar structures in their casework.

Biomechanical comparison of five cannulated screw fixation strategies for young vertical femoral neck fractures

Vertical femoral neck fractures in patients younger than 65 years of age often require hip-conserving surgeries. However, traditional fixation strategies using three parallel cannulated screws often fail in such patients due to an unfavorable biomechanical environment. This study compared different cannulated screw fixation techniques in patients via patient-specific finite element analysis with linear tetrahedral (C3D4) elements. Forty vertical femoral neck fracture models were created based on computed tomography images obtained from eight healthy participants. Five different fixation strategies: alpha, buttress, rhomboid, inverted triangle, and triangle were assessed in walking status. Biomechanical parameters including stiffness, interfragmentary motion in two directions (detachment and shearing), compression force, and maximal implant stress were evaluated. The mean relative coefficient of strain distribution between the finite element analysis and experiment was from 0.78 to 0.94. Stiffness was highest (p < .05) in the buttress group (923.1 N/mm), while interfragmentary motion was lowest (p < .05) in the alpha group. Maximal stress was highest (p < .05) in the buttress group and lowest in the alpha group. Shearing values were significantly lower in the alpha group than in the rhomboid group (p = .004). Moreover, Shearing values were significantly higher (p = .027), while detachment values were significantly lower (p = .027), in the inverted triangle than in the triangle group. Clinical significance: Our results suggest that alpha fixation is the most reliable and biomechanically efficient strategy for young patients with vertical femoral neck fractures. Regular and inverted triangular fixation strategies may be suitable for fractures of different skeletal constructions due to antidetachment/shearing abilities.

Enhanced interfragmentary stability and improved clinical prognosis with use of the off-axis screw technique to treat vertical femoral neck fractures in nongeriatric patients

Background

The optimal internal fixation strategy for vertical femoral neck fractures (VFNFs) in nongeriatric patients remains uncertain. Therefore, the purpose of this study was to compare the clinical prognoses and underlying mechanical characteristics of a novel off-axis screw technique with dynamic hip screws (DHSs) and three traditional parallel screws.

Methods

This study included a clinical investigation and a patient-specific finite element analysis (FEA). In the clinical investigation, VFNF patients were grouped by fixation type: (1) use of three parallel screws (G-TRI); (2) augmentation with an off-axis screw (G-ALP); and (3) DHS with an anti-rotational screw (G-DHS). Fixation failures (nonunion, femoral neck shortening (FNS), varus deformation, screw cut-out) and avascular necrosis (AVN) consequent to the three types of fixations were compared. In the FEA, twenty-four fixation models with the three fixation types were created based on the data of eight healthy volunteers. Models were assessed under walking conditions. Stiffness, interfragmentary motion (IFM), and implant stress were evaluated.

Results

In the clinical investigation, the fixation failure rate was significantly (p < 0.05) lower in G-ALP (18.5%) than in G-DHS (37.5%) and G-TRI (39.3%). No significant difference in AVN was observed among the three fixation groups. In the FEA, stiffness and implant stress in the G-DHS models were significantly (p < 0.05) higher, and the IFM of G-ALP was significantly (p < 0.05) lower among the groups.

Conclusions

Among fixation types for VFNFs, the off-axis screw technique exhibited better interfragmentary stability (lowest IFM) and a lower fixation failure rate (especially FNS). Analyzing interfragmentary stability in biomechanical experiments is more consistent with clinical prognosis than construct stability for VFNFs, suggesting that internal fixations should aim for this outcome.

Supplementary Information

The online version contains supplementary material available at 10.1186/s13018-021-02619-8.

Comparative analysis of sRNAs, degradome and transcriptomics in sweet sorghum reveals the regulatory roles of miRNAs in Cd accumulation and tolerance

Key miRNAs including sbi-miR169p/q, sbi-miR171g/j, sbi-miR172a/c/d, sbi-miR172e, sbi-miR319a/b, sbi-miR396a/b, miR408, sbi-miR5384, sbi-miR5565e and nov_23 were identified to function in the regulation of Cd accumulation and tolerance. As an energy plant, sweet sorghum shows great potential in the phytoremediation of Cd-contaminated soils. However, few studies have focused on the regulatory roles of miRNAs and their targets under Cd stress. In this study, comparative analysis of sRNAs, degradome and transcriptomics was conducted in high-Cd accumulation (H18) and low-Cd accumulation (L69) genotypes of sweet sorghum. A total of 38 conserved and 23 novel miRNAs with differential expressions were identified under Cd stress or between H18 and L69, and 114 target genes of 41 miRNAs were validated. Furthermore, 25 miRNA-mRNA pairs exhibited negatively correlated expression profiles and sbi-miR172e together with its target might participate in the distinct Cd tolerance between H18 and L69 as well as sbi-miR172a/c/d. Additionally, two groups of them: miR169p/q-nov_23 and miR408 were focused through the co-expression analysis, which might be involved in Cd uptake and tolerance by regulating their targets associated with transmembrane transportation, cytoskeleton activity, cell wall construction and ROS (reactive oxygen species) homeostasis. Further experiments exhibited that cell wall components of H18 and L69 were different when exposed to cadmium, which might be regulated by miR169p/q, miR171g/j, miR319a/b, miR396a/b, miR5384 and miR5565e through their targets. Through this study, we aim to reveal the potential miRNAs involved in sweet sorghum in response to Cd stress and provide references for developing high-Cd accumulation or high Cd-resistant germplasm of sweet sorghum that can be used in phytoremediation.

Constraints on Cosmic Strings Using Data from the Third Advanced LIGO-Virgo Observing Run

We search for gravitational-wave signals produced by cosmic strings in the Advanced LIGO and Virgo full O3 dataset. Search results are presented for gravitational waves produced by cosmic string loop features such as cusps, kinks, and, for the first time, kink-kink collisions. A template-based search for short-duration transient signals does not yield a detection. We also use the stochastic gravitational-wave background energy density upper limits derived from the O3 data to constrain the cosmic string tension Gμ as a function of the number of kinks, or the number of cusps, for two cosmic string loop distribution models. Additionally, we develop and test a third model that interpolates between these two models. Our results improve upon the previous LIGO-Virgo constraints on Gμ by 1 to 2 orders of magnitude depending on the model that is tested. In particular, for the one-loop distribution model, we set the most competitive constraints to date: Gμ≲4×10^{-15}. In the case of cosmic strings formed at the end of inflation in the context of grand unified theories, these results challenge simple inflationary models.

Constraints on Cosmic Strings Using Data from the Third Advanced LIGO-Virgo Observing Run

We search for gravitational-wave signals produced by cosmic strings in the Advanced LIGO and Virgo full O3 dataset. Search results are presented for gravitational waves produced by cosmic string loop features such as cusps, kinks, and, for the first time, kink-kink collisions. A template-based search for short-duration transient signals does not yield a detection. We also use the stochastic gravitational-wave background energy density upper limits derived from the O3 data to constrain the cosmic string tension Gμ as a function of the number of kinks, or the number of cusps, for two cosmic string loop distribution models. Additionally, we develop and test a third model that interpolates between these two models. Our results improve upon the previous LIGO-Virgo constraints on Gμ by 1 to 2 orders of magnitude depending on the model that is tested. In particular, for the one-loop distribution model, we set the most competitive constraints to date: Gμ≲4×10^{-15}. In the case of cosmic strings formed at the end of inflation in the context of grand unified theories, these results challenge simple inflationary models.

Depressive symptoms in Chinese adults with risk factors for diabetes: the Shanghai High-Risk Diabetic Screen (SHiDS) study

AIMS

To evaluate the relationship between newly diagnosed diabetes or prediabetes and depressive symptoms among individuals with risk factors for diabetes in China. We also investigated the associations of depressive symptoms with pancreatic β-cell function and insulin resistance.

METHODS

We used cross-sectional data from the Shanghai High-Risk Diabetic Screen (SHiDS) project. Between 2014 and 2017, a total of 1728 participants were enrolled in this study and underwent an oral glucose tolerance test to screen for diabetes and prediabetes. Insulin resistance was evaluated using the homeostatic model assessment of insulin resistance and the modified Matsuda index. Pancreatic β-cell function was calculated using the homeostatic model assessment of β-cell function, Stumvoll first- and second-phase indexes. Elevated depressive symptoms were determined using the Patient Health Questionnaire-9 (PHQ-9 score ≥ 10).

RESULTS

The prevalence of elevated depressive symptoms in the total study population was 4.8% (83 of 1728). Compared with the normal glucose tolerance group, individuals with newly diagnosed diabetes were less likely to have elevated depressive symptoms even after controlling for potential confounders [adjusted odds ratio (OR) 0.35, 95% confidence interval (CI) 0.18-0.68; P = 0.002]. However, prediabetes was not associated with depressive symptoms. The odds for elevated depressive symptoms were increased in individuals with higher levels of the Stumvoll first-phase index. No association was observed between depressive symptoms and insulin resistance.

CONCLUSION

Elevated depressive symptoms were less prevalent in Chinese individuals with newly diagnosed diabetes among a high-risk population for diabetes.

Variation of PHT families adapts salt cress to phosphate limitation under salinity

Salt cress (Eutrema salsugineum) presents relatively high phosphate (Pi) use efficiency cy in its natural habitat. Phosphate Transporters (PHTs) play critical roles in Pi acquisition and homeostasis. Here, a comparative study of PHT families between salt cress and Arabidopsis was performed. A total of 27 putative PHT genes were identified in E. salsugineum genome. Notably, seven tandem genes encoding PHT1;3 were found, and function analysis in Arabidopsis indicated at least six EsPHT1;3s participated in Pi uptake. Meanwhile, different expression profiles of PHT genes between the two species under Pi limitation and salt stress were documented. Most PHT1 genes were down-regulated in Arabidopsis while up-regulated in salt cress under salinity, among which EsPHT1;9 was further characterized. EsPHT1;9 was involved in root-to-shoot Pi translocation. Particularly, the promoter of EsPHT1;9 outperformed that of AtPHT1;9 in promoting Pi translocation, K⁺ /Na⁺ ratio, thereby salt tolerance. Through cis-element analysis, we identified a bZIP transcription factor EsABF5 negatively regulating EsPHT1;9 and plant tolerance to low-Pi and salt stress. Altogether, more copies and divergent transcriptional regulation of PHT genes contribute to salt cress adaptation to the co-occurrence of salinity and Pi limitation, which add our knowledge on the evolutionary and molecular component of multistress- tolerance of this species.

Silk-elastinlike copolymers enhance bioaccumulation of semisynthetic glycosaminoglycan ethers for prevention of radiation induced proctitis

Radiation-induced proctitis (RIP) is a debilitating adverse event that occurs commonly during lower abdominal radiotherapy. The lack of prophylactic treatment strategies leads to diminished patient quality of life, disruption of radiotherapy schedules, and limitation of radiotherapy efficacy due to dose-limiting toxicities. Semisynthetic glycosaminoglycan ethers (SAGE) demonstrate protective effects from RIP. However, low residence time in the rectal tissue limits their utility. We investigated controlled delivery of GM-0111, a SAGE analogue with demonstrated efficacy against RIP, using a series of temperature-responsive polymers to compare how distinct phase change behaviors, mechanical properties and release kinetics influence rectal bioaccumulation. Poly(lactic acid)-co-(glycolic acid)-block-poly(ethylene glycol)-block-poly(lactic acid)-co-(glycolic acid) copolymers underwent macroscopic phase separation, expelling >50% of drug during gelation. Poloxamer compositions released GM-0111 cargo within 1 h, while silk-elastinlike copolymers (SELPs) enabled controlled release over a period of 12 h. Bioaccumulation was evaluated using fluorescence imaging and confocal microscopy. SELP-415K, a SELP analogue with 4 silk units, 15 elastin units, and one elastin unit with lysine residues in the monomer repeats, resulted in the highest rectal bioaccumulation. SELP-415K GM-0111 compositions were then used to provide localized protection from radiation induced tissue damage in a murine model of RIP. Rectal delivery of SAGE using SELP-415K significantly reduced behavioral pain responses, and reduced animal mass loss compared to irradiated controls or treatment with traditional delivery approaches. Histological scoring showed RIP injury was ameliorated for animals treated with GM-0111 delivered by SELP-415K. The enhanced bioaccumulation provided by thermoresponsive SELPs via a liquid to semisolid transition improved rectal delivery of GM-0111 to mice and radioprotection in a RIP model.

Magneto-Based Synergetic Therapy for Implant-Associated Infections via Biofilm Disruption and Innate Immunity Regulation

Implant-associated infections (IAIs) are a common cause of orthopedic surgery failure due to microbial biofilm-induced antibiotic-resistance and innate immune inactivation. Thus, the destruction of microbial biofilm plays a key role in reducing IAIs. Herein, first, a magneto-based synergetic therapy (MST) is proposed and demonstrated against IAIs based on biofilm destruction. Under an alternating magnetic field (AMF), CoFe2O4@MnFe2O4 nanoparticles (MNPs), with a rather strong magnetic hyperthermal capacity, can generate sufficient thermal effect to cause dense biofilm dispersal. Loosened biofilms provide channels through which nitrosothiol-coated MNPs (MNP-SNOs) can penetrate. Subsequently, thermosensitive nitrosothiols rapidly release nitric oxide (NO) inside biofilms, thus efficiently killing sessile bacteria under the magnetothermal effect of MNPs. More importantly, MNP-SNOs can trigger macrophage-related immunity to prevent the relapse of IAIs by exposing the infected foci to a consistent innate immunomodulatory effect. The notable anti-infection effect of this nanoplatform is also confirmed in a rat IAI model. This work presents the promising potential of combining magnetothermal therapy with immunotherapy, for the effective and durable control and elimination of IAIs.

Plant Morphological, Physiological and Anatomical Adaption to Flooding Stress and the Underlying Molecular Mechanisms

Globally, flooding is a major threat causing substantial yield decline of cereal crops, and is expected to be even more serious in many parts of the world due to climatic anomaly in the future. Understanding the mechanisms of plants coping with unanticipated flooding will be crucial for developing new flooding-tolerance crop varieties. Here we describe survival strategies of plants adaptation to flooding stress at the morphological, physiological and anatomical scale systemically, such as the formation of adventitious roots (ARs), aerenchyma and radial O₂ loss (ROL) barriers. Then molecular mechanisms underlying the adaptive strategies are summarized, and more than thirty identified functional genes or proteins associated with flooding-tolerance are searched out and expounded. Moreover, we elaborated the regulatory roles of phytohormones in plant against flooding stress, especially ethylene and its relevant transcription factors from the group VII Ethylene Response Factor (ERF-VII) family. ERF-VIIs of main crops and several reported ERF-VIIs involving plant tolerance to flooding stress were collected and analyzed according to sequence similarity, which can provide references for screening flooding-tolerant genes more precisely. Finally, the potential research directions in the future were summarized and discussed. Through this review, we aim to provide references for the studies of plant acclimation to flooding stress and breeding new flooding-resistant crops in the future.

MiR-133a-3p relieves the oxidative stress induced trophoblast cell apoptosis through the BACH1/Nrf2/HO-1 signaling pathway

Preeclampsia (PE) is a major cause of the pregnancy morbidity and mortality over the world. Disorganized placentation caused by trophoblast cell abnormity is one of main risk factors to induce PE. MiR-133a-3p has been shown to contain regulatory effects on oxidative stress in the cardiomyocytes. But the effects of miR-133a-3p on oxidative stress-induced apoptosis in the trophoblast cells remain unknown. In this study, trophoblast HTR-8/SVneo cells were transfected with miR-133a-3p mimics and inhibitor. H2O2 (250 microM) treatment of cells was adopted to induce oxidative stress. A series of typical molecular and cellular experiments was subsequently performed in order to investigate this issue. It was found that miR-133a-3p overexpression attenuated the oxidative stress induced by H2O2 through reduced ROS and MDA levels and enhanced antioxidase activities in the trophoblast cells. Overexpressed miR-133a-3p was shown to relieve the oxidative stress-induced apoptosis of HTR-8/SVneo cells. At molecular levels, a direct binding effect of miR-133a-3p on BACH1 was verified. Moreover, miR-133a-3p overexpression also enhanced BACH1 downstream Nrf2/HO-1 signaling to activate antioxidant genes. It is collectively demonstrated that miR-133a-3p can relieve the oxidative stress-induced apoptosis in the trophoblast cells through the BACH1/Nrf2/HO-1 signaling pathway via targeting BACH1 directly. This regulatory mechanism of miR-133a-3p in the trophoblast cells under oxidative stress may give a new perspective for oxidative stress-induced trophoblast cell abnormality and be useful to study more pathological mechanisms of PE.