Intralines of quasi-conical intersections on torsion planes: methylamine as a case study

Recently we reported on a novel feature associated with the intersection of the two lowest states (1)A' and (1)A'' of the methylamine (J. Chem. Phys. 2008, 128, 244302). We established the existence of a finite (closed) line of conical intersections (ci), namely, a finite seam, located in the HC-NHH symmetry plane, a line that is formed by moving a single hydrogen on that plane while locking the positions of the (six) other atoms. In the present article, this study is extended to the corresponding torsion planes formed by rotating the methyl group around the CN axis. The torsion planes, in contrast with the HC-NHH symmetry plane, do not satisfy the symmetry feature that enables the seam just mentioned. Nevertheless, the calculated nonadiabatic coupling terms (NACTs) resemble features similar to those encountered in the HC-NHH symmetry plane. Following a tedious numerical study supported by a theoretical model (Section III), it was verified that these NACTs may become similar to those on the symmetry plane, sometimes even to the level of almost no distinction, but lack one basic feature; namely, they are not singular and therefore do not form topological effects.

Vibrational spectroscopy of triacetone triperoxide (TATP): anharmonic fundamentals, overtones and combination bands

The vibrational spectrum of triacetone triperoxide (TATP) is studied by the correlation-corrected vibrational self-consistent field (CC-VSCF) method which incorporates anharmonic effects. Fundamental, overtone, and combination band frequencies are obtained by using a potential based on the PM3 method and yielding the same harmonic frequencies as DFT/cc-pVDZ calculations. Fundamentals and overtones are also studied with anharmonic single-mode (without coupling) DFT/cc-pVDZ calculations. Average deviations from experiment are similar for all methods: 2.1-2.5%. Groups of degenerate vibrations form regions of numerous combination bands with low intensity: the 5600-5800 cm(-1) region contains ca. 70 overtones and combinations of CH stretches. Anharmonic interactions are analyzed.

Raman and infrared fingerprint spectroscopy of peroxide-based explosives

A comparative study of the vibrational spectroscopy of peroxide-based explosives is presented. Triacetone triperoxide (TATP) and hexamethyl-enetriperoxide-diamine (HMTD), now commonly used by terrorists, are examined as well as other peroxide-ring structures: DADP (diacetone diperoxide); TPTP [3,3,6,6,9,9-Hexaethyl-1,2,4,5,7,8-hexaoxo-nonane (tripentanone triperoxide)]; DCypDp {6,7,13,14-Tetraoxadispiro [4.2.4.2]tetradecane (dicyclopentanone diperoxide)}; TCypDp {6,7,15,16,22,23-Hexaoxatrispiro[4.2.4.2.4.2] henicosane (tricyclopentanone triperoxide)}; DCyhDp {7,8,15,16-tetraoxadispiro [5.2.5.2] hexadecane (dicyclohexanone diperoxide)}; and TCyhTp {7,8,14,15,21,22-hexaoxatrispiro [5.2.5.2.5.2] tetracosane (tricyclohexanone triperoxide)}. Both Raman and infrared (IR) spectra were measured and compared to theoretical calculations. The calculated spectra were obtained by calculation of the harmonic frequencies of the studied compounds, at the density functional theory (DFT) B3LYP/cc-pVDZ level of theory, and by the use of scaling factors. It is found that the vibrational features related to the peroxide bonds are strongly mixed. As a result, the spectrum is congested and highly sensitive to minor changes in the molecule.

The effect of silica fume on biodegradation of cement paste and its capacity to immobilize strontium during exposure to microbial sulfur oxidation

The disposal of low-level radioactive waste containing isotopes such as strontium by immobilization in cement paste has become common practice. However, the stability of cement paste in the environment may be impaired by sulfuric acid produced by sulfur-oxidizing bacteria. Since biodegradation rates in the environment of most radioactive waste burial sites are too low to be measured, determination of the degradation kinetics of cement paste is a difficult task. This study reports on the development of an accelerated biodegradation system for cement pastes in which the cement paste is exposed to a continuous culture of the sulfur-oxidizing bacterium Halothiobacillus neapolitanus. This system facilitated detection of the biodegradation processes in cement paste after as short a time as 15 days. A comparison of the durability of a cement paste blended with silica fume with that of unblended cement paste showed that the silica fume induced an increase in the leaching of Ca(+2) and Si and enhanced weight loss, indicating rapid deterioration in the structural integrity of the cement paste. The leaching of Sr(+2) from the silica fume amended cement paste was slightly reduced as compared with the non amended cement paste, indicating an increase in immobilization of strontium. Nevertheless, our findings do not support the use of silica fume as a suitable additive for immobilization of low-level radioactive waste.

Abstractive dissociation of oxygen over Al(111): a nonadiabatic quantum model

The dissociation of oxygen on a clean aluminum surface is studied theoretically. A nonadiabatic quantum dynamical model is used, based on four electronically distinct potential energy surfaces characterized by the extent of charge transfer from the metal to the adsorbate. A flat surface approximation is used to reduce the computation complexity. The conservation of the helicopter angular momentum allows Boltzmann averaging of the outcome of the propagation of a three degrees of freedom wave function. The dissociation event is simulated by solving the time-dependent Schrödinger equation for a period of 30 femtoseconds. As a function of incident kinetic energy, the dissociation yield follows the experimental trend. An attempt at simulation employing only the lowest adiabatic surface failed, qualitatively disagreeing with both experiment and nonadiabatic calculations. The final products, adsorptive dissociation and abstractive dissociation, are obtained by carrying out a semiclassical molecular dynamics simulation with surface hopping which describes the back charge transfer from an oxygen atom negative ion to the surface. The final adsorbed oxygen pair distribution compares well with experiment. By running the dynamical events backward in time, a correlation is established between the products and the initial conditions which lead to their production. Qualitative agreement is thus obtained with recent experiments that show suppression of abstraction by rotational excitation.

Role of Vibrationally Excited NO in Promoting Electron Emission When Colliding with a Metal Surface: A Nonadiabatic Dynamic Model

A nonadiabatic quantum dynamic model has been developed to study the process of electron emission from a low-work-function metal surface. The process is initiated by scattering a highly vibrationally excited NO molecule from a surface composed of a Cs layer covering a Ru crystal. The model addresses the increasing quantum yield of the electron emission as a function of the molecular vibrational excitation and incident kinetic energy. The reaction mechanism is identified as a long-range harpooning electron transfer to a molecular ion which is then accelerated toward the surface. Upon impact, the molecular ion emits its excess electron.

Atomistic-Scale Simulations of the Initial Chemical Events in the Thermal Initiation of Triacetonetriperoxide

To study the initial chemical events related to the detonation of triacetonetriperoxide (TATP), we have performed a series of molecular dynamics (MD) simulations. In these simulations we used the ReaxFF reactive force field, which we have extended to reproduce the quantum mechanics (QM)-derived relative energies of the reactants, products, intermediates, and transition states related to the TATP unimolecular decomposition. We find excellent agreement between the QM-predicted reaction products and those observed from 100 independent ReaxFF unimolecular MD cookoff simulations. Furthermore, the primary reaction products and average initiation temperature observed in these 100 independent unimolecular cookoff simulations match closely with those observed from a TATP condensed-phase cookoff simulation, indicating that unimolecular decomposition dominates the thermal initiation of the TATP condensed phase. Our simulations demonstrate that thermal initiation of condensed-phase TATP is entropy-driven (rather than enthalpy-driven), since the initial reaction (which mainly leads to the formation of acetone, O(2), and several unstable C(3)H(6)O(2) isomers) is almost energy-neutral. The O(2) generated in the initiation steps is subsequently utilized in exothermic secondary reactions, leading finally to formation of water and a wide range of small hydrocarbons, acids, aldehydes, ketones, ethers, and alcohols.

Decomposition of Triacetone Triperoxide Is an Entropic Explosion

Both X-ray crystallography and electronic structure calculations using the cc-pVDZ basis set at the DFT B3LYP level were employed to study the explosive properties of triacetone triperoxide (TATP) and diacetone diperoxide (DADP). The thermal decomposition pathway of TATP was investigated by a series of calculations that identified transition states, intermediates, and the final products. Counterintuitively, these calculations predict that the explosion of TATP is not a thermochemically highly favored event. It rather involves entropy burst, which is the result of formation of one ozone and three acetone molecules from every molecule of TATP in the solid state.

Accelerated biodegradation of cement by sulfur-oxidizing bacteria as a bioassay for evaluating immobilization of low-level radioactive waste

Disposal of low-level radioactive waste by immobilization in cement is being evaluated worldwide. The stability of cement in the environment may be impaired by sulfur-oxidizing bacteria that corrode the cement by producing sulfuric acid. Since this process is so slow that it is not possible to perform studies of the degradation kinetics and to test cement mixtures with increased durability, procedures that accelerate the biodegradation are required. Semicontinuous cultures of Halothiobacillus neapolitanus and Thiomonas intermedia containing thiosulfate as the sole energy source were employed to accelerate the biodegradation of cement samples. This resulted in a weight loss of up to 16% after 39 days, compared with a weight loss of 0.8% in noninoculated controls. Scanning electron microscopy of the degraded cement samples revealed deep cracks, which could be associated with the formation of low-density corrosion products in the interior of the cement. Accelerated biodegradation was also evident from the leaching rates of Ca(2+) and Si(2+), the major constituents of the cement matrix, and Ca exhibited the highest rate (up to 20 times greater than the control rate) due to the reaction between free lime and the biogenic sulfuric acid. Leaching of Sr(2+) and Cs(+), which were added to the cement to simulate immobilization of the corresponding radioisotopes, was also monitored. In contrast to the linear leaching kinetics of calcium, silicon, and strontium, the leaching pattern of cesium produced a saturation curve similar to the control curve. Presumably, the leaching of cesium is governed by the diffusion process, whereas the leaching kinetics of the other three ions seems to governed by dissolution of the cement.