Effect of epidermal growth factor in preimplantation development of porcine cloned embryos

In this study, we determined the expression of epidermal growth factor (EGF) and its receptor (EGFr) gene, and the effect of exogenous EGF supplementation on preimplantation development of porcine somatic cell nuclear transfer (SCNT) embryos. In vitro matured gilt oocytes were fertilized with frozen-thawed semen in vitro or reconstructed with fetal fibroblasts by SCNT. In Experiment 1, total RNA was isolated from oocytes, preimplantation SCNT, or in vitro fertilization (IVF) embryos. The expression of EGF and EGFr mRNA was determined using reverse transcription-polymerase chain reaction (RT-PCR). In SCNT and IVF embryos, the EGF mRNA was detected in oocytes, 2-cell, 4-cell, 8-cell, morulae, and blastocysts, while EGFr mRNA was detected in oocytes, 2-cell, morulae, and blastocysts. In Experiment 2, SCNT embryos at 1-cell stage were cultured in North Carolina State University (NCSU)-23 medium supplemented with different concentrations of EGF (0.1, 1, or 10 ng/ml). Supplementing with 10 ng/ml EGF improved cleavage rate (82.8% vs. 76.8%, P<0.05), but not the rate of blastocyst formation compared to the control. At all concentrations, EGF increased (P<0.05) the total cell number in blastocysts (range 50.5-53.7 vs. 43.9). In Experiment 3, EGF (10 ng/ml) was added to NCSU-23 medium at the morula stage. The EGF did not affect blastocyst formation, total cell number in blastocysts or the ratio of inner cell mass (ICM) to total cell number. In conclusion, we demonstrated that EGF and EGFr mRNA are expressed in porcine IVF and SCNT preimplantation embryos, and that EGF increased the quality of blastocysts by increasing total cell numbers in porcine SCNT embryos.

Embryotropic effect of insulin-like growth factor (IGF)-I and its receptor on development of porcine preimplantation embryos produced by in vitro fertilization and somatic cell nuclear transfer

Insulin-like growth factor (IGF)-I is a receptor-mediated autocrine/paracrine growth/survival factor for mammalian embryo development. The present study investigated the temporal expression and regulation of porcine IGF-I receptor (IGF-IR) mRNA and the role of IGF-I on development of porcine in vitro fertilized (IVF) and somatic cell nuclear transfer (SCNT) embryos. As assessed by semi-quantitative reverse transcription-polymerase chain reaction (RT-PCR), the level of IGF-IR mRNA expression was high in unfertilized oocytes, 2-cell and 4-cell embryos and gradually decreased in 8-cell embryos, morulae, and blastocysts in both IVF and SCNT series. The IVF or SCNT embryos were cultured with 0, 1, 10, 50, or 100 ng/ml IGF-I for 168 hr. Supplementing with 50 ng/ml IGF-I increased blastocyst formation and the number of cells in inner cell masses (ICMs) in both IVF and SCNT embryos. In a second experiment, more blastocysts were obtained when IVF or SCNT embryos were cultured for the first 48 hr or for the entire 168 hr with 50 ng/ml IGF-I compared to culturing without IGF-I for 48 hr or with IGF-I for the last 120 hr or without IGF-I for the entire 168 hr. Treating IVF or SCNT embryos with 50 ng/ml IGF-I significantly up-regulated IGF-IR mRNA compared to untreated control embryos. In conclusion, the present study demonstrated that IGF-IR mRNA is expressed in porcine IVF and SCNT embryos, and that IGF-I improved the developmental competence of IVF and SCNT embryos through its specific receptors.

Antibiotic selective pressure for the maintenance of antibiotic resistant genes in coliform bacteria isolated from the aquatic environment

Coliform bacteria isolated from the aquatic environment were investigated for antibiotic susceptibility and detailed structures of class 1 integrons. A high proportion of isolates were found to be resistant to sulfamethoxazole, aminoglycosides, and beta-lactams. The 750 (53.6%) isolates were resistant to one or more of the antibiotics tested out of 1,400 coliform bacteria. Based on the MIC of antibiotics and antibiogram, 150 isolates were selected and further studied for class 1 integrons. The intI1 gene was found in 36 (24.0%) of the 150 isolates. Twelve isolates carried the gene cassettes responsible for antibiotic resistance, while no gene cassettes were found in 24 isolates. Seven different genes, dfrA5, dfrA7, dfrA12, dfrA17, aaA2, aaA5, and aad(3'), were detected in gene cassettes. The dfrA and aad genes located on class 1 integrons were responsible for resistance to trimethoprim and aminoglycosides. The remaining 24 coliform bacteria had the incomplete or non-functional class 1 integrons. These results indicated that antibiotic selective pressures may play an important role to maintain gene cassettes of class 1 integrons and in the absence of sustained antibiotic pressures, such as the aquatic environment, coliform bacteria may carry empty or non-functional class 1 integrons.

p21(WAF1) is associated with CDK2 and CDK4 protein during HL-60 cell differentiation by TPA treatment

TPA-treated HL-60 cells are mainly arrested in G1 by p21(WAF1) accumulation. We investigate the downstream changes following such accumulation. Increased p21(WAF1) is associated with CDK2 and CDK4. pRb is dephosphorylated in the presence of p21-CDK2/4 complexes, and the Rb-E2F1 complex increases after TPA treatment, whereas the Rb-HDAC1 complex decreases slightly. Our results suggest that increased p21(WAF1) is associated with CDK2/4, and that these complexes induce pRb dephosphorylation. In turn, hypophosphorylated pRb are mainly complexed with E2F1, but HDAC1 appears not to be a key component in this process.

Apoptotic cell death induced by Acinetobacter baumannii in epithelial cells through caspase-3 activation

Epithelial cell death induced by Acinetobacter baumannii infection was investigated using in vitro assays. Eight hours after live A. baumannii infection, HeLa cells exhibited detachment from the dish, rounding morphologies, high proportions of trypan blue-positive cells and extensive DNA breakdown with faint apoptotic banding, which is indicative of cells undergoing apoptosis. The enzymatic activity of caspase-3 was increased in cells as early as 2 h after infection. In addition, apoptosis of HeLa cells was induced by treatment with bacterial culture filtrates but not with formalin-killed bacteria. These results indicate that A. baumannii infection triggers apoptosis in HeLa cells through caspase-3 activation.

Antimicrobial resistance of Shigella sonnei in Korea during the last two decades

Eighty-eight strains of Shigella sonnei isolated in Korea during the period 1980 to 1999 were tested for susceptibility to 13 antimicrobial agents. S. sonnei isolates demonstrated high frequencies of resistance to sulfamethoxazole (97.7%), tetracycline (96.6%), and trimethoprim (95.5%). S. sonnei isolates from the 1990s were more resistant to nalidixic acid than isolates from the 1980s (100 vs 7.7%), while isolates from the 1990s were more susceptible to chloramphenicol than isolates from the 1980s (0 vs 100%). Ampicillin-resistant S. sonnei isolates produced the TEM-1 beta-lactamase with a pI of 5.4. The TEM-1 gene was located on conjugally transferable plasmids in the majority of isolates. S. sonnei isolates were all susceptible to cefotaxime, cefoxitin, ceftazidime, ciprofloxacin, and norfloxacin. These results indicate that cephalosporins and quinolones may be alternative antibiotics for the treatment of S. sonnei infections in Korea.

Improved sample preparation for cross-sectional transmission electron microscopy of layered structures using rocking-angle ion-milling techniques

The rocking-angle ion-milling technique has been employed to produce optimum Pt/Ti/SiO2/Si, W/TiN/SiO2/Si, and (Pb,La)TiO3/Pt/MgO samples for cross-sectional transmission electron microscopy (TEM). Because of the different ion-milling rates between film layers and substrate materials, no satisfactory cross-sectional TEM samples could be obtained when they were made by the conventional ion-milling method. The differential thinning problems could be effectively solved by optimizing both ion-milling rocking-angle and ion-beam incidence angle without the increase of overall milling time. It was found that the rocking-angle of around 40 degrees is good when the multilayer structure is composed of materials with great ion-milling rate differences, while the rocking angle of around 80 degrees is good when the ion-milling rate differences are relatively small.