51
|
Jibril L, Chen PC, Hu J, Odom TW, Mirkin CA. Massively Parallel Nanoparticle Synthesis in Anisotropic Nanoreactors. ACS NANO 2019; 13:12408-12414. [PMID: 31613599 DOI: 10.1021/acsnano.9b05781] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
This work reports a massively parallel approach for synthesizing inorganic nanoparticles (Au, Ag, Se, and mixed oxides of Cu, Co, Ni, Ge, and Ta) based upon lithographically generated arrays of square pyramidal nanoholes, which serve as nanoreactors. Particle precursor-containing polymers are spin-coated onto the nanoreactors, which upon dewetting generate a morphology of isolated polymer droplets in each nanoreactor. This dewetting process yields a well-defined and precisely controlled volume of polymer and therefore particle precursor in each nanoreactor. Subsequent stepwise annealing (first at 150 °C and then at 500 °C) yields arrays of monodisperse, site-isolated particles with sub-5 nm position control. By varying the precursor loading of the polymer, particle size can be systematically controlled in the 7-30 nm range. This work not only introduces the concept of merging block copolymer inks with nanohole arrays in the synthesis of nanoparticles but also underscores the value of the nanoreactor shape in controlling resulting particle position.
Collapse
|
52
|
Xiao D, Cheng J, Liang W, Cheng C, Wang Q, Chai R, Yan Z, Du Y, Zhao J. Innovative Approach to Nano Thiazole-Zn with Promising Physicochemical and Bioactive Properties by Nanoreactor Construction. JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY 2019; 67:11577-11583. [PMID: 31557026 DOI: 10.1021/acs.jafc.9b03700] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Nanotechnology has provided a novel approach for the preparation of a safe and highly effective pesticide formulation. Thiazole-Zn, a widely used bactericide, was successfully prepared at nanoscale by an innovative approach of final synthesis process control. Its plausible formation mechanism based on restricted particle aggregation in a nanoreactor was elucidated. Then in order to assess the application performance of thiazole-Zn nanoparticle, the nanoformulation (NPF) was conveniently formulated. Interestingly, the physicochemical properties of NPF showed better than that of the commercial pesticide formulation (CPF) in dispersibility, wettability, spreadability, and stability. At the same time, the in vitro bioassay showed that the minimum inhibitory concentrations (MICs) of NPF against Xanthomonas oryzae pv Oryzae (XOO), Xanthomonas oryzae pv Oryzicola (XOC), Erwinia carotovora subsp. Carotovora (Jones) Holland (ECC), and Erwinia chrysanthemi pv Zeae (ECZ) were 46.88, 93.75, 93.75, and 375.00 mg/L, respectively, whereas those of CPF were 93.75, 375.00, 375.00, and 875.00 mg/L, respectively. Therefore, NPF exhibited stronger antibacterial activity against the above-mentioned pathogens. Moreover, NPF was more effective to bacterial blight of rice than CPF in field trial. As a conclusion, nanotechnology for pesticides by synthesis process control will have a potential in improving the utilization efficiency and relieving the corresponding environmental pollution.
Collapse
|
53
|
Sarkar P, Sarkar S, Ghosh P. A heteroditopic macrocycle as organocatalytic nanoreactor for pyrroloacridinone synthesis in water. Beilstein J Org Chem 2019; 15:1505-1514. [PMID: 31354868 PMCID: PMC6632221 DOI: 10.3762/bjoc.15.152] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/30/2019] [Accepted: 06/25/2019] [Indexed: 12/13/2022] Open
Abstract
A heteroditopic macrocycle is reported as an efficient organocatalytic nanoreactor for the synthesis of diversely functionalized pyrroloacridinones in aqueous medium. A library of compounds was synthesized in a one-step pathway utilizing 10 mol % of the nanoreactor following a sustainable methodology in water with high yields.
Collapse
|
54
|
Zhao H, Xu J, Huang W, Zhan G, Zhao Y, Chen H, Yang X. Spatiotemporally Light-Activatable Platinum Nanocomplexes for Selective and Cooperative Cancer Therapy. ACS NANO 2019; 13:6647-6661. [PMID: 31083971 DOI: 10.1021/acsnano.9b00972] [Citation(s) in RCA: 24] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/24/2023]
Abstract
Highly efficient nanoarchitectures are of great interest for achieving precise chemotherapy with minimized adverse side effects in cancer therapy. However, a major challenge remains in exploring a rational approach to synthesize spatiotemporally selective vehicles for precise cancer chemotherapy. Here, we demonstrate a rational design of bifunctional light-activatable platinum nanocomplexes (PtNCs) that produce dually cooperative cancer therapy through spatiotemporally selective thermo-chemotherapy. The Pt4+-coordinated polycarboxylic nanogel is explored as the nanoreactor template, which is exploited to synthesize bifunctional PtNCs consisting of a zero-valent Pt0 core and a surrounding bivalent Pt2+ shell with tunable ratios through a facile and controllable reduction. Without light exposure, chemotherapeutic Pt2+ ions are tightly bound on the surface of PtNCs, efficiently reducing undesirable drug leakage and nonselective damage on normal tissues/cells. Upon light exposure, PtNCs generate much heat via photothermal conversion from the Pt0 core and simultaneously trigger a rapid release of chemotherapeutic Pt2+ ions, thereby leading to the spatiotemporally light-activatable synergistic effect of thermo-chemotherapy. Moreover, PtNCs show enhanced tumor accumulation through the heat-triggered hydrophilicity-hydrophobicity transition upon immediate light exposure after injection, dramatically facilitating in vivo tumor regression through their cooperative anticancer efficiency. This rational design of spatiotemporally activatable nanoparticles provides an insightful tool for precise cancer therapy.
Collapse
|
55
|
Harrison A, Vuong TT, Zeevi MP, Hittel BJ, Wi S, Tang C. Rapid Self-Assembly of Metal/Polymer Nanocomposite Particles as Nanoreactors and Their Kinetic Characterization. NANOMATERIALS (BASEL, SWITZERLAND) 2019; 9:E318. [PMID: 30823357 PMCID: PMC6473589 DOI: 10.3390/nano9030318] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 01/24/2019] [Revised: 02/14/2019] [Accepted: 02/18/2019] [Indexed: 01/11/2023]
Abstract
Self-assembled metal nanoparticle-polymer nanocomposite particles as nanoreactors are a promising approach for performing liquid phase reactions using water as a bulk solvent. In this work, we demonstrate rapid, scalable self-assembly of metal nanoparticle catalyst-polymer nanocomposite particles via Flash NanoPrecipitation. The catalyst loading and size of the nanocomposite particles can be tuned independently. Using nanocomposite particles as nanoreactors and the reduction of 4-nitrophenol as a model reaction, we study the fundamental interplay of reaction and diffusion. The induction time is affected by the sequence of reagent addition, time between additions, and reagent concentration. Combined, our experiments indicate the induction time is most influenced by diffusion of sodium borohydride. Following the induction time, scaling analysis and effective diffusivity measured using NMR indicate that the observed reaction rate are reaction- rather than diffusion-limited. Furthermore, the intrinsic kinetics are comparable to ligand-free gold nanoparticles. This result indicates that the polymer microenvironment does not de-activate or block the catalyst active sites.
Collapse
|
56
|
Ke W, Li J, Mohammed F, Wang Y, Tou K, Liu X, Wen P, Kinoh H, Anraku Y, Chen H, Kataoka K, Ge Z. Therapeutic Polymersome Nanoreactors with Tumor-Specific Activable Cascade Reactions for Cooperative Cancer Therapy. ACS NANO 2019; 13:2357-2369. [PMID: 30699292 DOI: 10.1021/acsnano.8b09082] [Citation(s) in RCA: 66] [Impact Index Per Article: 13.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/20/2023]
Abstract
Therapeutic nanoreactors are of increasing interest in precise cancer therapy, which have been explored to in situ produce therapeutic compounds from inert prodrugs or intrinsic molecules at the target sites. However, engineering a nanoreactor with tumor activable cascade reactions for efficient cooperative cancer therapy remains a great challenge. Herein, we demonstrate a polymersome nanoreactor with tumor acidity-responsive membrane permeability to activate cascade reactions for orchestrated cooperative cancer treatment. The nanoreactors are constructed from responsive polyprodrug polymersomes incorporating ultrasmall iron oxide nanoparticles and glucose oxidase in the membranes and inner aqueous cavities, respectively. The cascade reactions including glucose consumption to generate H2O2, accelerated iron ion release, Fenton reaction between H2O2 and iron ion to produce hydroxyl radicals (•OH), and •OH-triggered rapid release of parent drugs can be specifically activated by the tumor acidity-responsive membrane permeability. During this process, the orchestrated cooperative cancer therapy including starving therapy, chemodynamic therapy, and chemotherapy is realized for high-efficiency tumor suppression by the in situ consumed and produced compounds. The nanoreactor design with tumor-activable cascade reactions represents an insightful paradigm for precise cooperative cancer therapy.
Collapse
|
57
|
Nanoreactor Design Based on Self-Assembling Protein Nanocages. Int J Mol Sci 2019; 20:ijms20030592. [PMID: 30704048 PMCID: PMC6387247 DOI: 10.3390/ijms20030592] [Citation(s) in RCA: 23] [Impact Index Per Article: 4.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/01/2019] [Revised: 01/28/2019] [Accepted: 01/29/2019] [Indexed: 12/18/2022] Open
Abstract
Self-assembling proteins that form diverse architectures are widely used in material science and nanobiotechnology. One class belongs to protein nanocages, which are compartments with nanosized internal spaces. Because of the precise nanoscale structures, proteinaceous compartments are ideal materials for use as general platforms to create distinct microenvironments within confined cellular environments. This spatial organization strategy brings several advantages including the protection of catalyst cargo, faster turnover rates, and avoiding side reactions. Inspired by diverse molecular machines in nature, bioengineers have developed a variety of self-assembling supramolecular protein cages for use as biosynthetic nanoreactors that mimic natural systems. In this mini-review, we summarize current progress and ongoing efforts creating self-assembling protein based nanoreactors and their use in biocatalysis and synthetic biology. We also highlight the prospects for future research on these versatile nanomaterials.
Collapse
|
58
|
AuNPs-Based Thermoresponsive Nanoreactor as an Efficient Catalyst for the Reduction of 4-Nitrophenol. NANOMATERIALS 2018; 8:nano8120963. [PMID: 30469465 PMCID: PMC6315678 DOI: 10.3390/nano8120963] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/15/2018] [Revised: 11/11/2018] [Accepted: 11/16/2018] [Indexed: 11/17/2022]
Abstract
A new AuNPs-based thermosensitive nanoreactor (SiO₂@PMBA@Au@PNIPAM) was designed and prepared by stabilizing AuNPs in the layer of poly(N,N'-methylenebisacrylamide) (PMBA) and subsequent wrapping with the temperature-sensitive poly(N-isopropylacrylamide) (PNIPAM) layer. The new nanoreactor exhibited high dispersibility and stability in aqueous solution and effectively prevented the aggregation of AuNPs caused by the phase transformation of PNIPAM. The XPS and ATR-FTIR results indicated that AuNPs could be well stabilized by PMBA due to the electron transfer between the N atoms of amide groups in the PMBA and Au atoms of AuNPs. The catalytic activity and thermoresponsive property of the new nanoreactor were invested by the reduction of the environmental pollutant, 4-nitrophenol (4-NP), with NaBH₄ as a reductant. It exhibited a higher catalytic activity at 20 °C and 30 °C (below LCST of PNIPAM), but an inhibited catalytic activity at 40 °C (above LCST of PNIPAM). The PNIPAM layer played a switching role in controlling the catalytic rate by altering the reaction temperature. In addition, this nanoreactor showed an easily recyclable property due to the existence of a silica core and also preserved a rather high catalytic efficiency after 16 times of recycling.
Collapse
|
59
|
Yu S, Shan R, Sun GY, Chen T, Wu L, Jin LY. Construction of Various Supramolecular Assemblies from Rod-Coil Molecules Containing Biphenyl and Anthracene Groups Driven by Donor-Acceptor Interactions. ACS APPLIED MATERIALS & INTERFACES 2018; 10:22529-22536. [PMID: 29893113 DOI: 10.1021/acsami.8b01461] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
Rod-coil amphiphilic functional molecules, comprising a rigid aromatic building block and hydrophilic oligoether dendrons as the coil segments, were synthesized. These compounds exhibit a powerful self-organizing ability to form supramolecular nanoparticles and long nanofibers in tetrahydrofuran/water solution, by controlling the intermolecular interaction of the rigid blocks. These molecules are able to form supramolecular polymers and, subsequently, to form sheetlike nanoaggregates, through charge-transfer interactions by the addition of a guest molecule, tetracyanoquinodimethane. Notably, upon addition of water-soluble 2,4,6-trinitrophenol, the self-assembly of these molecules exhibits the antagonistic effect owing to donor-acceptor and hydrophobic-hydrophilic interactions among the molecules. The experimental results reveal that various morphologies of rod-coil molecular assemblies can be obtained by tuning the molecular interaction and the hydrophilicity of guest electron-acceptor molecules. Interestingly, the cross-coupling reaction between phenylboronic acid and chlorobenzene occurs within the charge complexes of these molecular aggregates. This occurs in the nanoenvironment that affords an extremely concentrated reaction zone and reduces the activation energy barrier required for the cross-coupling reaction.
Collapse
|
60
|
Haša J, Hanuš J, Štěpánek F. Magnetically Controlled Liposome Aggregates for On-Demand Release of Reactive Payloads. ACS APPLIED MATERIALS & INTERFACES 2018; 10:20306-20314. [PMID: 29791801 DOI: 10.1021/acsami.8b03891] [Citation(s) in RCA: 14] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
A colloidal system able to act as a miniature reactor for on-demand release of reactive payloads has been demonstrated. The system is based on submicrometer aggregates consisting of anionic liposomes that act as storage reservoirs for the reactants, superparamagnetic iron oxide nanoparticles (SPIONs) that enable magnetic positioning in space and controlled release of reactants from the liposomes by radiofrequency stimulation, and an oppositely charged polyelectrolyte (poly-l-lysine) that keeps the constituent elements within the aggregates at a defined ratio. The kinetics of liposome-PLL-SPION heteroaggregation was systematically mapped and a suitable composition of the liposome bilayer was found such that the system exhibits stability at ambient conditions and radiofrequency triggered release at physiological temperature. The functionality of the system was demonstrated using a reaction between resazurin and ascorbic acid. The ability to release the reactants on-demand at defined time points was demonstrated. The system opens up opportunities for the controlled local delivery of unstable of highly bioactive molecules produced in situ and on demand from stable precursors.
Collapse
|
61
|
McCoy K, Uchida M, Lee B, Douglas T. Templated Assembly of a Functional Ordered Protein Macromolecular Framework from P22 Virus-like Particles. ACS NANO 2018; 12:3541-3550. [PMID: 29558117 DOI: 10.1021/acsnano.8b00528] [Citation(s) in RCA: 35] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
Bottom-up construction of mesoscale materials using biologically derived nanoscale building blocks enables engineering of desired physical properties using green production methods. Virus-like particles (VLPs) are exceptional building blocks due to their monodispersed sizes, geometric shapes, production ease, proteinaceous composition, and our ability to independently functionalize the interior and exterior interfaces. Here a VLP, derived from bacteriophage P22, is used as a building block for the fabrication of a protein macromolecular framework (PMF), a tightly linked 3D network of functional protein cages that exhibit long-range order and catalytic activity. Assembly of PMFs was electrostatically templated, using amine-terminated dendrimers, then locked into place with a ditopic cementing protein that binds to P22. Long-range order is preserved on removal of the dendrimer, leaving a framework material composed completely of protein. Encapsulation of β-glucosidase enzymes inside of P22 VLPs results in formation of stable, condensed-phase materials with high local concentration of enzymes generating catalytically active PMFs.
Collapse
|
62
|
Uchida M, McCoy K, Fukuto M, Yang L, Yoshimura H, Miettinen HM, LaFrance B, Patterson DP, Schwarz B, Karty JA, Prevelige PE, Lee B, Douglas T. Modular Self-Assembly of Protein Cage Lattices for Multistep Catalysis. ACS NANO 2018; 12:942-953. [PMID: 29131580 PMCID: PMC5870838 DOI: 10.1021/acsnano.7b06049] [Citation(s) in RCA: 51] [Impact Index Per Article: 8.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/21/2023]
Abstract
The assembly of individual molecules into hierarchical structures is a promising strategy for developing three-dimensional materials with properties arising from interaction between the individual building blocks. Virus capsids are elegant examples of biomolecular nanostructures, which are themselves hierarchically assembled from a limited number of protein subunits. Here, we demonstrate the bio-inspired modular construction of materials with two levels of hierarchy: the formation of catalytically active individual virus-like particles (VLPs) through directed self-assembly of capsid subunits with enzyme encapsulation, and the assembly of these VLP building blocks into three-dimensional arrays. The structure of the assembled arrays was successfully altered from an amorphous aggregate to an ordered structure, with a face-centered cubic lattice, by modifying the exterior surface of the VLP without changing its overall morphology, to modulate interparticle interactions. The assembly behavior and resultant lattice structure was a consequence of interparticle interaction between exterior surfaces of individual particles and thus independent of the enzyme cargos encapsulated within the VLPs. These superlattice materials, composed of two populations of enzyme-packaged VLP modules, retained the coupled catalytic activity in a two-step reaction for isobutanol synthesis. This study demonstrates a significant step toward the bottom-up fabrication of functional superlattice materials using a self-assembly process across multiple length scales and exhibits properties and function that arise from the interaction between individual building blocks.
Collapse
|
63
|
Light-enabled reversible self-assembly and tunable optical properties of stable hairy nanoparticles. Proc Natl Acad Sci U S A 2018; 115:E1391-E1400. [PMID: 29386380 DOI: 10.1073/pnas.1714748115] [Citation(s) in RCA: 87] [Impact Index Per Article: 14.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/28/2023] Open
Abstract
The ability to dynamically organize functional nanoparticles (NPs) via the use of environmental triggers (temperature, pH, light, or solvent polarity) opens up important perspectives for rapid and convenient construction of a rich variety of complex assemblies and materials with new structures and functionalities. Here, we report an unconventional strategy for crafting stable hairy NPs with light-enabled reversible and reliable self-assembly and tunable optical properties. Central to our strategy is to judiciously design amphiphilic star-like diblock copolymers comprising inner hydrophilic blocks and outer hydrophobic photoresponsive blocks as nanoreactors to direct the synthesis of monodisperse plasmonic NPs intimately and permanently capped with photoresponsive polymers. The size and shape of hairy NPs can be precisely tailored by modulating the length of inner hydrophilic block of star-like diblock copolymers. The perpetual anchoring of photoresponsive polymers on the NP surface renders the attractive feature of self-assembly and disassembly of NPs on demand using light of different wavelengths, as revealed by tunable surface plasmon resonance absorption of NPs and the reversible transformation of NPs between their dispersed and aggregated states. The dye encapsulation/release studies manifested that such photoresponsive NPs may be exploited as smart guest molecule nanocarriers. By extension, the star-like block copolymer strategy enables the crafting of a family of stable stimuli-responsive NPs (e.g., temperature- or pH-sensitive polymer-capped magnetic, ferroelectric, upconversion, or semiconducting NPs) and their assemblies for fundamental research in self-assembly and crystallization kinetics of NPs as well as potential applications in optics, optoelectronics, magnetic technologies, sensory materials and devices, catalysis, nanotechnology, and biotechnology.
Collapse
|
64
|
Cheng G, Han XH, Hao SJ, Nisic M, Zheng SY. In Situ Caging of Biomolecules in Graphene Hybrids for Light Modulated Bioactivity. ACS APPLIED MATERIALS & INTERFACES 2018; 10:3361-3371. [PMID: 29300454 DOI: 10.1021/acsami.7b17544] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/07/2023]
Abstract
Remote and noninvasive modulation of protein activity is essential for applications in biotechnology and medicine. Optical control has emerged as the most attractive approach owing to its high spatial and temporal resolutions; however, it is challenging to engineer light responsive proteins. In this work, a near-infrared (NIR) light-responsive graphene-silica-trypsin (GST) nanoreactor is developed for modulating the bioactivity of trypsin molecules. Biomolecules are spatially confined and protected in the rationally designed compartment architecture, which not only reduces the possible interference but also boosts the bioreaction efficiency. Upon NIR irradiation, the photothermal effect of the GST nanoreactor enables the ultrafast in situ heating for remote activation and tuning of the bioactivity. We apply the GST nanoreactor for remote and ultrafast proteolysis of proteins, which remarkably enhances the proteolysis efficiency and reduces the bioreaction time from the overnight of using free trypsin to seconds. We envision that this work not only provides a promising tool of ultrafast and remotely controllable proteolysis for in vivo proteomics in study of tissue microenvironment and other biomedical applications but also paves the way for exploring smart artificial nanoreactors in biomolecular modulation to gain insight in dynamic biological transformation.
Collapse
|
65
|
Kim D, Choi JK, Kim SM, Hwang I, Koo J, Choi S, Cho SH, Kim K, Lee IS. Confined Nucleation and Growth of PdO Nanocrystals in a Seed-Free Solution inside Hollow Nanoreactor. ACS APPLIED MATERIALS & INTERFACES 2017; 9:29992-30001. [PMID: 28841005 DOI: 10.1021/acsami.7b08856] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/07/2023]
Abstract
This paper reports a novel and adaptable hollow nanoreactor system containing a solution of cucurbituril (CB) inside a silica nanoparticle (CB@h-SiO2) which enables the nucleation and formation of nanocrystals (NCs) to be confined at the seed-free interior solution inside the cavity. The above nanospace confinement strategy restricted the volume of medium available for NC formation to the solution inside the cavity to a few tens of nanometers in size and allowed homogeneous NC nucleation to be examined. Harboring of CB@h-SiO2 in a Pd2+ complex solution confined the nucleation and formation of PdO NCs to the well-isolated nanosized cavity protected by the silica nanoshell, allowing the convoluted formation of clustered PdO NCs to be thoroughly examined. The corresponding temporal investigation indicated that PdO NC clusters evolved via a distinct pathway combining dendritic growth on early nucleated seed NCs and attachment of small intermediate clusters. In addition, the explored strategy was used to fabricate a recyclable nanocatalyst system for selective catalytic oxidation of cinammyl alcohols, featuring a cavity-included Fe3O4/PdO nanocomposite.
Collapse
|
66
|
Ross JF, Bridges A, Fletcher JM, Shoemark D, Alibhai D, Bray HEV, Beesley JL, Dawson WM, Hodgson LR, Mantell J, Verkade P, Edge CM, Sessions RB, Tew D, Woolfson DN. Decorating Self-Assembled Peptide Cages with Proteins. ACS NANO 2017; 11:7901-7914. [PMID: 28686416 DOI: 10.1021/acsnano.7b02368] [Citation(s) in RCA: 43] [Impact Index Per Article: 6.1] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/12/2023]
Abstract
An ability to organize and encapsulate multiple active proteins into defined objects and spaces at the nanoscale has potential applications in biotechnology, nanotechnology, and synthetic biology. Previously, we have described the design, assembly, and characterization of peptide-based self-assembled cages (SAGEs). These ≈100 nm particles comprise thousands of copies of de novo designed peptide-based hubs that array into a hexagonal network and close to give caged structures. Here, we show that, when fused to the designed peptides, various natural proteins can be co-assembled into SAGE particles. We call these constructs pSAGE for protein-SAGE. These particles tolerate the incorporation of multiple copies of folded proteins fused to either the N or the C termini of the hubs, which modeling indicates form the external and internal surfaces of the particles, respectively. Up to 15% of the hubs can be functionalized without compromising the integrity of the pSAGEs. This corresponds to hundreds of copies giving mM local concentrations of protein in the particles. Moreover, and illustrating the modularity of the SAGE system, we show that multiple different proteins can be assembled simultaneously into the same particle. As the peptide-protein fusions are made via recombinant expression of synthetic genes, we envisage that pSAGE systems could be developed modularly to actively encapsulate or to present a wide variety of functional proteins, allowing them to be developed as nanoreactors through the immobilization of enzyme cascades or as vehicles for presenting whole antigenic proteins as synthetic vaccine platforms.
Collapse
|
67
|
Jakobson CM, Slininger Lee MF, Tullman‐Ercek D. De novo design of signal sequences to localize cargo to the 1,2-propanediol utilization microcompartment. Protein Sci 2017; 26:1086-1092. [PMID: 28241402 PMCID: PMC5405430 DOI: 10.1002/pro.3144] [Citation(s) in RCA: 28] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/18/2016] [Revised: 02/16/2017] [Accepted: 02/17/2017] [Indexed: 12/24/2022]
Abstract
Organizing heterologous biosyntheses inside bacterial cells can alleviate common problems owing to toxicity, poor kinetic performance, and cofactor imbalances. A subcellular organelle known as a bacterial microcompartment, such as the 1,2-propanediol utilization microcompartment of Salmonella, is a promising chassis for this strategy. Here we demonstrate de novo design of the N-terminal signal sequences used to direct cargo to these microcompartment organelles. We expand the native repertoire of signal sequences using rational and library-based approaches and show that a canonical leucine-zipper motif can function as a signal sequence for microcompartment localization. Our strategy can be applied to generate new signal sequences localizing arbitrary cargo proteins to the 1,2-propanediol utilization microcompartments.
Collapse
|
68
|
Preparation of Thermo-Responsive and Cross-Linked Fluorinated Nanoparticles via RAFT-Mediated Aqueous Polymerization in Nanoreactors. Molecules 2017; 22:molecules22020152. [PMID: 28124975 PMCID: PMC6155661 DOI: 10.3390/molecules22020152] [Citation(s) in RCA: 10] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/23/2016] [Revised: 12/20/2016] [Accepted: 01/09/2017] [Indexed: 11/30/2022] Open
Abstract
In this work, a thermo-responsive and cross-linked fluoropolymer poly(2,2,2-Trifluoroethyl) methacrylate (PTFEMA) was successfully prepared by reversible addition-fragmentation chain transfer (RAFT) mediated aqueous polymerization with a thermo-responsive diblock poly(dimethylacrylamide-b-N-isopropylacrylamide) (PDMA-b-PNIPAM) that performed a dual function as both a nanoreactor and macro-RAFT agent. The cross-linked polymer particles proved to be in a spherical-like structure of about 50 nm in diameter and with a relatively narrow particle size distribution. 1H-NMR and 19F-NMR spectra showed that thermo-responsive diblock P(DMA-b-NIPAM) and cross-linked PTFEMA particles were successfully synthesized. Influence of the amount of ammonium persulfate (APS), the molar ratio of monomers to RAFT agent, influence of the amount of cross-linker on aqueous polymerization and thermo-responsive characterization of the particles are investigated. Monomer conversion increased from 44% to 94% with increasing the molar ratio of APS and P(DMA-b-NIPAM) from 1:9 to1:3. As the reaction proceeded, the particle size increased from 29 to 49 nm due to the consumption of TFEMA monomer. The size of cross-linked nanoparticles sharply decreased from 50.3 to 40.5 nm over the temperature range 14–44 °C, suggesting good temperature sensitivity for these nanoparticles.
Collapse
|
69
|
Guiet A, Unmüssig T, Göbel C, Vainio U, Wollgarten M, Driess M, Schlaad H, Polte J, Fischer A. Yolk@Shell Nanoarchitectures with Bimetallic Nanocores-Synthesis and Electrocatalytic Applications. ACS APPLIED MATERIALS & INTERFACES 2016; 8:28019-28029. [PMID: 27556179 DOI: 10.1021/acsami.6b06595] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/06/2023]
Abstract
In the present paper, we demonstrate a versatile approach for the one-pot synthesis of metal oxide yolk@shell nanostructures filled with bimetallic nanocores. This novel approach is based on the principles of hydrophobic nanoreactor soft-templating and is exemplified for the synthesis of various AgAuNP@tin-rich ITO (AgAu@ITOTR) yolk@shell nanomaterials. Hydrophobic nanoreactor soft-templating thereby takes advantage of polystyrene-block-poly(4-vinylpiridine) inverse micelles as two-compartment nanoreactor template, in which the core and the shell of the micelles serve as metal and metal oxide precursor reservoir, respectively. The composition, size and number of AuAg bimetallic nanoparticles incorporated within the ITOTR yolk@shell can easily be tuned. The conductivity of the ITOTR shell and the bimetallic composition of the AuAg nanoparticles, the as-synthesized AuAgNP@ITOTR yolk@shell materials could be used as efficient electrocatalysts for electrochemical glucose oxidation with improved onset potential when compared to their gold counterpart.
Collapse
|
70
|
Lee J, Boersma A, Boudreau MA, Cheley S, Daltrop O, Li J, Tamagaki H, Bayley H. Semisynthetic Nanoreactor for Reversible Single-Molecule Covalent Chemistry. ACS NANO 2016; 10:8843-50. [PMID: 27537396 PMCID: PMC5043417 DOI: 10.1021/acsnano.6b04663] [Citation(s) in RCA: 14] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/13/2016] [Accepted: 08/18/2016] [Indexed: 05/27/2023]
Abstract
Protein engineering has been used to remodel pores for applications in biotechnology. For example, the heptameric α-hemolysin pore (αHL) has been engineered to form a nanoreactor to study covalent chemistry at the single-molecule level. Previous work has been confined largely to the chemistry of cysteine side chains or, in one instance, to an irreversible reaction of an unnatural amino acid side chain bearing a terminal alkyne. Here, we present four different αHL pores obtained by coupling either two or three fragments by native chemical ligation (NCL). The synthetic αHL monomers were folded and incorporated into heptameric pores. The functionality of the pores was validated by hemolysis assays and by single-channel current recording. By using NCL to introduce a ketone amino acid, the nanoreactor approach was extended to an investigation of reversible covalent chemistry on an unnatural side chain at the single-molecule level.
Collapse
|
71
|
Gonzalez-Esquer CR, Newnham SE, Kerfeld CA. Bacterial microcompartments as metabolic modules for plant synthetic biology. THE PLANT JOURNAL : FOR CELL AND MOLECULAR BIOLOGY 2016; 87:66-75. [PMID: 26991644 DOI: 10.1111/tpj.13166] [Citation(s) in RCA: 21] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/21/2016] [Revised: 03/04/2016] [Accepted: 03/08/2016] [Indexed: 05/28/2023]
Abstract
Bacterial microcompartments (BMCs) are megadalton-sized protein assemblies that enclose segments of metabolic pathways within cells. They increase the catalytic efficiency of the encapsulated enzymes while sequestering volatile or toxic intermediates from the bulk cytosol. The first BMCs discovered were the carboxysomes of cyanobacteria. Carboxysomes compartmentalize the enzyme ribulose-1,5-bisphosphate carboxylase/oxygenase (RuBisCO) with carbonic anhydrase. They enhance the carboxylase activity of RuBisCO by increasing the local concentration of CO2 in the vicinity of the enzyme's active site. As a metabolic module for carbon fixation, carboxysomes could be transferred to eukaryotic organisms (e.g. plants) to increase photosynthetic efficiency. Within the scope of synthetic biology, carboxysomes and other BMCs hold even greater potential when considered a source of building blocks for the development of nanoreactors or three-dimensional scaffolds to increase the efficiency of either native or heterologously expressed enzymes. The carboxysome serves as an ideal model system for testing approaches to engineering BMCs because their expression in cyanobacteria provides a sensitive screen for form (appearance of polyhedral bodies) and function (ability to grow on air). We recount recent progress in the re-engineering of the carboxysome shell and core to offer a conceptual framework for the development of BMC-based architectures for applications in plant synthetic biology.
Collapse
|
72
|
Synthesis of Mixed Cu/Ce Oxide Nanoparticles by the Oil-in-Water Microemulsion Reaction Method. MATERIALS 2016; 9:ma9060480. [PMID: 28773602 PMCID: PMC5456763 DOI: 10.3390/ma9060480] [Citation(s) in RCA: 20] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/25/2016] [Revised: 06/06/2016] [Accepted: 06/10/2016] [Indexed: 11/17/2022]
Abstract
Cerium oxide and mixed Cu/Ce oxide nanoparticles were prepared by the oil-in-water (O/W) microemulsion reaction method in mild conditions. The Cu/Ce molar ratio was varied between 0/100 and 50/50. According to X-ray diffraction (XRD), below 30/70 Cu/Ce molar ratio, the materials presented a single phase consistent with cubic fluorite CeO₂. However, above Cu/Ce molar ratio 30/70, an excess monoclinic CuO phase in coexistence with the predominant Cu/Ce mixed oxide was detected by XRD and High-Resolution Transmission Electron Microscopy (HRTEM). Raman spectroscopy showed that oxygen vacancies increased significantly as the Cu content was increased. Band gap (Eg) was investigated as a function of the Cu/Ce molar ratio, resulting in values from 2.91 eV for CeO₂ to 2.32 eV for the mixed oxide with 30/70 Cu/Ce molar ratio. These results indicate that below 30/70 Cu/Ce molar ratio, Cu2+ is at least partially incorporated into the ceria lattice and very well dispersed in general. In addition, the photodegradation of Indigo Carmine dye under visible light irradiation was explored for selected samples; it was shown that these materials can remove such contaminants, either by adsorption and/or photodegradation. The results obtained will encourage investigation into the optical and photocatalytic properties of these mixed oxides, for widening their potential applications.
Collapse
|
73
|
Reverse-Bumpy-Ball-Type- Nanoreactor-Loaded Nylon Membranes as Peroxidase-Mimic Membrane Reactors for a Colorimetric Assay for H₂O₂. SENSORS 2016; 16:465. [PMID: 27043575 PMCID: PMC4850979 DOI: 10.3390/s16040465] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/02/2016] [Revised: 03/25/2016] [Accepted: 03/29/2016] [Indexed: 01/15/2023]
Abstract
Herein we report for the first time fabrication of reverse bumpy ball (RBB)-type-nanoreactor-based flexible peroxidase-mimic membrane reactors (MRs). The RBB-type nanoreactors with gold nanoparticles embedded in the inner walls of carbon shells were loaded on nylon membranes through a facile filtration approach. The as-prepared flexible catalytic membrane was studied as a peroxidase-mimic MR. It was found that the obtained peroxidase-mimic MR could exhibit several advantages over natural enzymes, such as facile and good recyclability, long-term stability and easy storage. Moreover, the RBB NS-modified nylon MRs as a peroxidase mimic provide a useful colorimetric assay for H2O2.
Collapse
|
74
|
Fang X, Zhao J, Zhang K, Yang P, Qiao L, Liu B. Polydopamine Grafted Porous Graphene as Biocompatible Nanoreactor for Efficient Identification of Membrane Proteins. ACS APPLIED MATERIALS & INTERFACES 2016; 8:6363-6370. [PMID: 26913964 DOI: 10.1021/acsami.6b00407] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
Functional nanomaterials, used as nanoreactors, have shown great advantages in a variety of applications in biomedical fields. Herein, we designed a novel nanoreactor system toward the application in membrane proteomics by using polydopamine-coated nanoporous graphene foams (NGFs-PD) prepared by a facile in situ oxidative polymerization. Taking advantage of the unique 3-D structure and surface functionalization, NGFs-PD can quickly adsorb a large amount of hydrophobic membrane proteins dissolved in sodium dodecyl sulfonate (SDS)/methanol and hydrophilic trypsin in aqueous solution, and then confine the proteolysis in the nanoscale domains to fasten the reaction rate. Therefore, the current nanoreactor system combines the multifunctions of highly efficient solubilization, immobilization, and proteolysis of membrane proteins. With the nanoreactor, digestion of standard membrane proteins can be finished in 10 min. 893 membrane proteins were identified from human glioma cells (U251). All these superiorities indicate that the biocompatible NGFs-PD nanoreactor system is of great promise to facilitate high-throughput membrane proteomic analysis.
Collapse
|
75
|
Qi X, Li X, Chen B, Lu H, Wang L, He G. Highly Active Nanoreactors: Patchlike or Thick Ni Coating on Pt Nanoparticles Based on Confined Catalysis. ACS APPLIED MATERIALS & INTERFACES 2016; 8:1922-1928. [PMID: 26725500 DOI: 10.1021/acsami.5b10083] [Citation(s) in RCA: 19] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
Catalyst-containing nanoreactors have attracted considerable attention for specific applications. Here, we initially report preparation of PtNi@SiO2 hollow microspheres based on confined catalysis. The previous encapsulation of dispersed Pt nanoparticles (NPs) in hollow silica microspheres ensures the formation of Pt@Ni coreshell NPs inside the silica porous shell. Thus, the Pt NPs not only catalyze the reduction of Ni ions but also direct Ni deposition on the Pt cores to obtain Pt@Ni core-shell catalyst. It is worthy to point out that this synthetic approach helps to form a patchlike or thick Ni coating on Pt cores by controlling the penetration time of Ni ions from the bulk solution into the SiO2 microspheres (0.5, 1, 2, or 4 h). Notably, the Pt@Ni core-shell NPs with a patch-like Ni layer on Pt cores (0.5 and 1 h) show a higher H2 generation rate of 1221-1475 H2 mL min(-1) g(-1)cat than the Pt@Ni NPs with a thick Ni layer (2 and 4 h, 920-1183 H2 mL min(-1) g(-1)cat), and much higher than that of pure Pt NPs (224 H2 mL min(-1) g(-1)cat). In addition, the catalyst possesses good stability and recyclability for H2 generation. The Pt@Ni core-shell NPs confined inside silica nanocapsules, with well-defined compositions and morphologies, high H2 generation rate, and recyclability, should be an ideal catalyst for specific applications in liquid phase reaction.
Collapse
|
76
|
Zeng L, Huang X, Chen X, Zheng C, Qian Q, Chen Q, Wei M. Ge/GeO2-Ordered Mesoporous Carbon Nanocomposite for Rechargeable Lithium-Ion Batteries with a Long-Term Cycling Performance. ACS APPLIED MATERIALS & INTERFACES 2016; 8:232-239. [PMID: 26651359 DOI: 10.1021/acsami.5b08470] [Citation(s) in RCA: 35] [Impact Index Per Article: 4.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
Germanium-based nanostructures are receiving intense interest in lithium-ion batteries because they have ultrahigh lithium ion storage ability. However, the Germanium-based anodes undergo the considerably large volume change during the charge/discharge processes, leading to a fast capacity fade. In the present work, a Ge/GeO2-ordered mesoporous carbon (Ge/GeO2-OMC) nanocomposite was successfully fabricated via a facile nanocasting route by using mesoporous carbon as a nanoreactor, and was then used as an anode for lithium-ion batteries. Benefited from its unique three-dimensional "meso-nano" structure, the Ge/GeO2-OMC nanocomposite exhibited large reversible capacity, excellent long-time cycling stability and high rate performance. For instance, a large reversible capacity of 1018 mA h g(-1) was obtained after 100 cycles at a current density of 0.1 A g(-1), which might be attributed to the unique structure of the Ge/GeO2-OMC nanocomposite. In addition, a reversible capacity of 492 mA h g(-1) can be retained when cycled to 500 cycles at a current density of 1 A g(-1).
Collapse
|
77
|
Kim YJ, Choi JK, Lee DG, Baek K, Oh SH, Lee IS. Solid-State Conversion Chemistry of Multicomponent Nanocrystals Cast in a Hollow Silica Nanosphere: Morphology-Controlled Syntheses of Hybrid Nanocrystals. ACS NANO 2015; 9:10719-10728. [PMID: 26517204 DOI: 10.1021/acsnano.5b05860] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
During thermal transformation of multicomponent nanocrystals in a silica nanosphere, FeAuPd alloy nanocrystals migrate outward and thereby leave a cavity in the silica matrix. Oxidation then converts these nanocrystals back into phase-segregated hybrid nanocrystals, AuPd@Fe3O4, with various morphologies. The FeAuPd-to-AuPd@Fe3O4 transformation was cast by the in situ generated hollow silica mold. Therefore, the morphological parameters of the transformed AuPd@Fe3O4 are defined by the degree of migration of the FeAuPd in the hollow silica nanoshell. This hollow silica-cast nanocrystal conversion was studied to develop a solid state protocol that can be used to produce a range of hybrid nanocrystals and that allows for systematic and sophisticated control of the resulting morphologies.
Collapse
|
78
|
Hussain MA, Shah A, Jantan I, Shah MR, Tahir MN, Ahmad R, Bukhari SNA. Hydroxypropylcellulose as a novel green reservoir for the synthesis, stabilization, and storage of silver nanoparticles. Int J Nanomedicine 2015; 10:2079-88. [PMID: 25844038 PMCID: PMC4368033 DOI: 10.2147/ijn.s75874] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022] Open
Abstract
Polysaccharides are attracting the vigil eye of researchers in order to design the green synthesis of silver nanoparticles (Ag NPs) of diverse size, shape, and application. We report an environmentally friendly method to synthesize Ag NPs where no physical reaction conditions were employed. Hydroxypropylcellulose (HPC) was used as a template nanoreactor, stabilizer, and capping agent to obtain Ag NPs. Different concentrations of AgNO3 solutions (50 mmol, 75 mmol, and 100 mmol) were mixed with a concentrated aqueous solution of HPC and the progress of the reaction was monitored by noting color changes of the reaction mixture at different reaction times for up to 24 hours. Characteristic ultraviolet-visible spectroscopy (UV/Vis) absorption bands of Ag NPs were observed in the range of 388-452 nm. The morphology of the Ag NPs was studied by scanning electron microscopy, transmission electron microscopy (TEM), and atomic force microscopy. The TEM images confirmed that the size of the Ag NPs was in the range of 25-55 nm. Powder X-ray diffraction studies showed that the crystal phase of the Ag NPs was face-centered cubic. The as-prepared Ag NPs were found to be stable, and no changes in size and morphology were observed after storage in HPC thin films over 1 year, as indicated by UV/Vis spectra. So, the present work furnishes a green and economical strategy for the synthesis and storage of stable Ag NPs. As-synthesized Ag NPs showed significant antimicrobial activity against different bacterial (Escherichia coli, Staphylococcus epidermidis, S. aureus, Bacillus subtilis, Pseudomonas aeruginosa) and fungal strains (Actinomycetes and Aspergillus niger).
Collapse
|
79
|
Renggli K, Nussbaumer MG, Urbani R, Pfohl T, Bruns N. A chaperonin as protein nanoreactor for atom-transfer radical polymerization. Angew Chem Int Ed Engl 2013; 53:1443-7. [PMID: 24459061 DOI: 10.1002/anie.201306798] [Citation(s) in RCA: 34] [Impact Index Per Article: 3.1] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/03/2013] [Revised: 09/18/2013] [Indexed: 11/10/2022]
Abstract
The group II chaperonin thermosome (THS) from the archaea Thermoplasma acidophilum is reported as nanoreactor for atom-transfer radical polymerization (ATRP). A copper catalyst was entrapped into the THS to confine the polymerization into this protein cage. THS possesses pores that are wide enough to release polymers into solution. The nanoreactor favorably influenced the polymerization of N-isopropyl acrylamide and poly(ethylene glycol)methylether acrylate. Narrowly dispersed polymers with polydispersity indices (PDIs) down to 1.06 were obtained in the protein nanoreactor, while control reactions with a globular protein-catalyst conjugate only yielded polymers with PDIs above 1.84.
Collapse
|