Mussel-Inspired Robust Peony-like Cu3(PO4)2 Composite Switchable Superhydrophobic Surfaces for Bidirectional Efficient Oil/Water Separation

To alleviate the economic and environmental damage caused by industrial discharges of oily wastewater, materials applied for efficient oil/water separation are receiving significant attention from researchers and engineers. Among others, switchable wettable materials for bidirectional oil/water separation show great potential for practical applications. Inspired by mussels, we utilized a simple immersion method to construct a polydopamine (PDA) coating on a peony-like copper phosphate surface. Then, TiO₂ was deposited on the PDA coating surface to build a micro-nano hierarchical structure, which was modified with octadecanethiol (ODT) to obtain a switchable wettable peony-like superhydrophobic surface. The water contact angle of the obtained superhydrophobic surface reached 153.5°, and the separation efficiency was as high as 99.84% with a flux greater than 15,100 L/(m²·h) after 10 separation cycles for a variety of heavy oil/water mixtures. Notably, the modified membranes have a unique photoresponsiveness, transforming to superhydrophilic upon ultraviolet irradiation, achieving separation efficiencies of up to 99.83% and separation fluxes greater than 32,200 L/(m²·h) after 10 separation cycles for a variety of light oil/water mixtures. More importantly, this switch behavior is reversible, and the high hydrophobicity can be restored after heating to achieve efficient separation of heavy oil/water mixtures. In addition, the prepared membranes can maintain high hydrophobicity under acid-base conditions and after 30 sandpaper abrasion cycles, and damaged membranes can be restored to superhydrophobicity after a brief modification in the ODT solution. This simple-to-prepare, easy-to-repair, robust membrane with switchable wettability shows great potential in the field of oil/water separation.

Zero-Material Cost Production of Soil-Coated Fabrics with Underwater Superoleophobicity for Antifouling Oil/Water Separation

Soil-coated fabrics were fabricated by scrape-coating of soil slurry onto cotton fabrics. The raw materials, soil, and cotton fabrics were, respectively, obtained from farmland and waste bed sheets, making the method a zero-material cost way to produce superwetting membrane. The superhydrophilic/underwater superoleophobic soil-coated fabrics exhibit high efficiency (>99%), ultra-high flux (~45,000 L m^-2 h^-1), and excellent antifouling behavior for separating water from various oils driven by gravity. The simple fabrication and superior performance suggest that the soil-coated fabric could be a promising candidate as a filtration membrane for practical applications in industrial oily wastewater and oil spill treatments.

Hydrogel/β-FeOOH-Coated Poly(vinylidene fluoride) Membranes with Superhydrophilicity/Underwater Superoleophobicity Facilely Fabricated via an Aqueous Approach for Multifunctional Applications

Hydrogel coatings that can endow various substrates with superior properties (e.g., biocompatibility, hydrophilicity, and lubricity) have wide applications in the fields of oil/water separation, antifouling, anti-bioadhesion, etc. Currently, the engineering of multifunctional hydrogel-coated materials with superwettability and water purification property using a simple and sustainable strategy is still largely uninvestigated but has a beneficial effect on the world. Herein, we successfully prepared poly(2-acrylamido-2-methyl-1-propanesulfonic acid) hydrogel/β-FeOOH-coated poly(vinylidene fluoride) (PVDF/PAMPS/β-FeOOH) membrane through free-radical polymerization and the in situ mineralization process. In this work, owing to the combination of hydrophilic PAMPS hydrogel coating and β-FeOOH nanorods anchored onto PVDF membrane, the resultant PVDF/PAMPS/β-FeOOH membrane achieved outstanding superhydrophilicity/underwater superoleophobicity. Moreover, the membrane not only effectively separated surfactant-stabilized oil/water emulsions, but also possessed a long-term use capacity. In addition, excellent photocatalytic activity against organic pollutants was demonstrated so that the PVDF/PAMPS/β-FeOOH membrane could be utilized to deal with wastewater. It is envisioned that these hydrogel/β-FeOOH-coated PVDF membranes have versatile applications in the fields of oil/water separation and wastewater purification.

Ag-CuO-Decorated Ceramic Membranes for Effective Treatment of Oily Wastewater

Although ultrafiltration is a reliable method for separating oily wastewater, the process is limited by problems of low flux and membrane fouling. In this study, for the first time, commercial TiO₂/ZrO₂ ceramic membranes modified with silver-functionalized copper oxide (Ag-CuO) nanoparticles are reported for the improved separation performance of emulsified oil. Ag-CuO nanoparticles were synthesized via hydrothermal technique and dip-coated onto commercial membranes at varying concentrations (0.1, 0.5, and 1.0 wt.%). The prepared membranes were further examined to understand the improvements in oil-water separation due to Ag-CuO coating. All modified ceramic membranes exhibited higher hydrophilicity and decreased porosity. Additionally, the permeate flux, oil rejection, and antifouling performance of the Ag-CuO-coated membranes were more significantly improved than the pristine commercial membrane. The 0.5 wt.% modified membrane exhibited a 30% higher water flux (303.63 L m^-2 h^-1) and better oil rejection efficiency (97.8%) for oil/water separation among the modified membranes. After several separation cycles, the 0.5 wt.% Ag-CuO-modified membranes showed a constant permeate flux with an excellent oil rejection of >95% compared with the unmodified membrane. Moreover, the corrosion resistance of the coated membrane against acid, alkali, actual seawater, and oily wastewater was remarkable. Thus, the Ag-CuO-modified ceramic membranes are promising for oil separation applications due to their high flux, enhanced oil rejection, better antifouling characteristics, and good stability.

Demulsifier-Inspired Superhydrophilic/Underwater Superoleophobic Membrane Modified with Polyoxypropylene Polyoxyethylene Block Polymer for Enhanced Oil/Water Separation Properties

Demulsifiers are considered the key materials for oil/water separation. Various works in recent years have shown that demulsifiers with polyoxypropylen epolyoxyethylene branched structures possess better demulsification effects. In this work, inspired by the chemical structure of demulsifiers, a novel superhydrophilic/underwater superoleophobic membrane modified with a polyoxypropylene polyoxyethylene block polymer was fabricated for enhanced separation of O/W emulsion. First, a typical polyoxypropylene polyoxyethylene triblock polymer (Pluronic F127) was grafted onto the poly styrene-maleic anhydride (SMA). Then, the Pluronic F127-grafted SMA (abbreviated as F127@SMA) was blended with polyvinylidene fluoride (PVDF) for the preparation of the F127@SMA/PVDF ultrafiltration membrane. The obtained F127@SMA/PVDF ultrafiltration membrane displayed superhydrophilic/underwater superoleophobic properties, with a water contact angle of 0° and an underwater oil contact angle (UOCA) higher than 150° for various oils. Moreover, it had excellent separation efficiency for SDS-stabilized emulsions, even when the oil being emulsified was crude oil. The oil removal efficiency was greater than 99.1%, and the flux was up to 272.4 L·m^-2·h^-1. Most importantly, the proposed F127@SMA/PVDF membrane also exhibited outstanding reusability and long-term stability. Its UOCA remained higher than 150° in harsh acidic, alkaline, and high-salt circumstances. Overall, the present work proposed an environmentally friendly and convenient approach for the development of practical oil/water separation membranes.

Facile Fabrication of Superwetting PVDF Membrane for Highly Efficient Oil/Water Separation

A novel superhydrophilic and underwater superoleophobic modified PVDF membrane for oil/water separation was fabricated through a modified blending approach. Pluronic F127 and amphiphilic copolymer P (MMA-AA) were directly blended with PVDF as a hydrophilic polymeric additive to prepare membranes via phase inversion induced by immersion precipitation. Then, the as-prepared microfiltration membranes were annealed at 160 °C for a short time and quenched to room temperature. The resultant membranes exhibited contact angles of hexane larger than 150° no matter whether in an acidic or basic environment. For 1, 2-dichloroethane droplets, the membrane surface showed a change from superoleophilic to superoleophobic under water with aqueous solutions with pH values from 2 to 13. This as-prepared membrane has good mechanical strength and can then be applied for oil and water mixture separation.

Ultrasmall Cu3(PO4)2 Nanoparticles Reinforced Hydrogel Membrane for Super-antifouling Oil/Water Emulsion Separation

Membrane fouling is a persistent and crippling challenge for oily wastewater treatment due to the high susceptibility of membranes to contamination. A feasible strategy is to design a robust and stable hydration layer on the membrane surface to prevent contaminates. A hydrogel illustrates a distinct category of materials with outstanding antifouling performance but is limited by its weak mechanical property. In this research, we report a reinforced hydrogel on a membrane by in situ growing ultrasmall hydrophilic Cu₃(PO₄)₂ nanoparticles in a copper alginate (CuAlg) layer via metal-ion-coordination-mediated mineralization. The embeddedness of hydrophilic Cu₃(PO₄)₂ nanoparticle with a size of 3-5 nm endows the CuAlg/Cu₃(PO₄)₂ composite hydrogel with enhanced mechanical property as well as reinforced hydrate ability. The as-prepared CuAlg/Cu₃(PO₄)₂ modified membrane exhibits a superior oil-repulsive property and achieves a nearly zero flux decline for separating surfactant stabilized oil-in-water emulsions with a high permeate flux up to ∼1330 L m^-2 h^-1 bar^-1. Notably, it is capable of keeping similar permeate flux for both pure water and oil-in-water emulsions during filtration, which is superior to the currently reported membranes, indicating its super-antifouling properties.

Polyaminophosphoric Acid-Modified Ion-Imprinted Chitosan Aerogel with Enhanced Antimicrobial Activity for Selective La(III) Recovery and Oil/Water Separation

In this study, polyaminophosphoric acid (PA)-functionalized ion-imprinted chitosan (CS) aerogel was fabricated for the first time, exhibiting good antibacterial property for selective La(III) recovery and oil/water separation. The as-prepared PA-CS-IIA-2 shows a remarkable adsorption capacity of 114.6 mg/g toward La(III) and high selectivity in the competitive adsorption systems, which is attributed to its abundant imprinting sites and surface functional groups. Benefiting from the amphiphilic property, the PA-CS-IIA-2 also exhibits an excellent adsorption performance for the extractant, oils, and organic solvents. Besides, the PA-CS-IIA-2 presents excellent regeneration and reusability characteristics. Moreover, compared with CS, the PA-CS-IIA-2 exhibits a significantly improved antibacterial activity originating from the PA component. Most importantly, the PA-CS-IIA-2 aerogel is capable of removing multiple pollutants all together and effectively inhibiting bacteria in the complex wastewater environments. Therefore, this study paves the way for developing high-performance rare-earth capture materials with multiple functions to meet diverse applications.

Special Superwetting Materials from Bioinspired to Intelligent Surface for On-Demand Oil/Water Separation: A Comprehensive Review

Since superwetting surfaces have emerged, on-demand oil/water separation materials serve as a new direction for meeting practical needs. This new separation mode uses a single porous material to allow oil-removing and water-removing to be achieved alternately. In this review, the fundamentals of wettability are systematically summarized in oil/water separation. Most importantly, the two states, bioinspired surface and intelligent surface, are summarized for on-demand oil/water separation. Specifically, bioinspired surfaces include micro/nanostructures, bioinspired chemistry, Janus-featured surfaces, and dual-superlyophobic surfaces that these superwetting materials can possess asymmetric wettability in one structure system or opposite underliquid wettability by prewetting. Furthermore, an intelligent surface can be adopted by various triggers such as pH, thermal and photo stimuli, etc., to control wettability for switchable oil/water separation reversibly, expressing a thought beyond nature to realize innovative oil/water separation by external stimuli. Remarkably, this review also discusses the advantages of all the materials mentioned above, expanding the separation scope from the on-demand oil/water mixtures to the multiphase immiscible liquid-liquid mixtures. Finally, the prospects of on-demand oil/water separation materials are also concluded.

Functional Coating from Amyloid Superwetting Films

Tailoring the hydrophilicity of solid surfaces with a strong affinity to water has been extensively explored in the last 20 years, but studies have been limited to the single function of wettability. Here, the multifunctional properties of tailored surface films are extended from exhibiting superwettability to facilitating biological activities. It is shown that amyloid fibrils can be universally coated onto various substrates, such as fabrics (non-woven organic masks), metal meshes, polyethersulfone (PES), glass, and more, endowing the resulting surfaces with excellent performance in oil/water mixture and emulsion separation, antifouling, and antifogging. Moreover, the biocompatible crosslinked amyloid fibril coatings can serve as a platform for biocatalytic activities by immobilizing enzymes, as shown in the 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulphonic acid) diammonium salt (ABTS) oxidation and Reactive Black 5 (RB5) degradation by laccase from Trametes versicolor. The study provides a universal approach to modifying surface morphology and chemical properties via fibrous protein templates, opening the way to unexplored bio-based applications and functionalities.

Effect of Oxygen Plasma Pre-Treatment on the Surface Properties of Si-Modified Cotton Membranes for Oil/Water Separations

Hydrophobic and oleophilic Si-based cotton fabrics have recently gained a lot of attention in oil/water separation due to their high efficiency. In this study, we present the effect of O₂ plasma pre-treatment on the final properties of two Si-based cotton membranes obtained from dip coating and plasma polymerization, using polydimethylsiloxane (PDMS) as starting polymeric precursor. The structural characterizations indicate the presence of Si bond on both the modified cotton surfaces, with an increase of the carbon bond, assuring the success in surface modification. On the other hand, employing O₂ plasma strongly changes the cotton morphology, inducing specific roughness and affecting the hydrophobicity durability and separation efficiency. In particular, the wettability has been retained after 20 laundry tests at 40 °C and 80 °C, and, for separation efficiency, even after 30 cycles, an improvement in the range of 10-15%, both at room temperature and at 90 °C can be observed. These results clearly demonstrate that O₂ plasma pre-treatment, an eco-friendly, non-toxic, solvent-free, and one-step method for inducing specific functionalities on surfaces, is very effective in enhancing the oil/water separation properties for Si-based cotton membranes, especially in combination with plasma polymerization procedure for Si-based deposition.

Fabrication of Superhydrophobic/Superoleophilic Bamboo Cellulose Foam for Oil/Water Separation

Water is an indispensable strategic resource for biological and social development. The problem of oily wastewater pollution originating from oil spillages, industrial discharge and domestic oil pollution has become an extremely serious international challenge. At present, numerous superwetting materials have been applied to effectively separate oil and water. However, most of these materials are difficult to scale and their large-scale application is limited by cost and environmental protection. Herein, a simple, environmentally friendly strategy including sol-gel, freeze-drying and surface hydrophobic modification is presented to fabricate a bamboo cellulose foam with special wetting characteristics. The bamboo cellulose foam is superhydrophobic, with a water contact angle of 160°, and it has the superoleophilic property of instantaneous oil absorption. Owing to the synergistic effect of the three-dimensional network structure of the superhydrophobic bamboo cellulose foam and its hydrophobic composition, it has an excellent oil-absorption performance of 11.5 g/g~37.5 g/g for various types of oil, as well as good recyclability, with an oil (1,2-dichloroethane) absorption capacity of up to 31.5 g/g after 10 cycles. In addition, the prepared cellulose-based foam exhibits an outstanding performance in terms of acid and alkali corrosion resistance. Importantly, owing to bamboo cellulose being a biodegradable, low-cost, natural polymer material that can be easily modified, superhydrophobic/superoleophilic bamboo cellulose foam has great application potential in the field of oily wastewater treatment.

Atmospheric Pressure Plasma-Treated Polyurethane Foam as Reusable Absorbent for Removal of Oils and Organic Solvents from Water

This paper reports the optimization of a two-step atmospheric pressure plasma process to modify the surface properties of a polyurethane (PU) foam and, specifically, to prepare a superhydrophobic/superoleophilic absorbent for the removal of oils and nonpolar organic solvents from water. In particular, in the first step, an oxygen-containing dielectric barrier discharge (DBD) is used to induce the etching/nanotexturing of the foam surfaces; in the second step, an ethylene-containing DBD enables uniform overcoating with a low-surface-energy hydrocarbon polymer film. The combination of surface nanostructuring and low surface energy ultimately leads to simultaneous superhydrophobic and superoleophilic wetting properties. X-ray photoelectron spectroscopy, scanning electron microscopy and water contact angle measurements are used for the characterization of the samples. The plasma-treated PU foam selectively absorbs various kinds of hydrocarbon-based liquids (i.e., hydrocarbon solvents, mineral oils, motor oil, diesel and gasoline) up to 23 times its own weight, while it completely repels water. These absorption performances are maintained even after 50 absorption/desorption cycles and after immersion in hot water as well as acidic, basic and salt aqueous solutions. The plasma-treated foam can remove mineral oil while floating on the surface of mineral oil/water mixtures with a separation efficiency greater than 99%, which remains unaltered after 20 separation cycles.

Polyphenylene Sulfide Ultrafine Viscous Fibrous Membrane Modified by ZIF-8 for Highly Effective Oil/Water Separation under High Salt or Alkaline Conditions

The oil/water separation in harsh environments has always been a challenging topic all over the world. In this study, the ZIF-8/PPS fiber membranes were fabricated via the combination of hot pressing and in situ growth. The distribution of ZIF-8 in the membranes was adjusted by changing the ZIF-8 in situ growth time, which could control the oil/water separation effect. Due to the hydrophilic nature of the ZIF-8/PPS fiber membranes, the water molecules in the oil-in-water emulsion could quickly penetrate into the fiber membrane under the drive of pressure, gravity, and capillary force, forming a water layer on the surface of the fiber membranes. The coupling of the water layer and the fiber structure prevented direct contact between the oil molecules and the fiber membrane, thereby realizing the separation of the emulsion. The results show that when the ZIF-8 in situ growth time was 10 h, the contact angle, the porosity, and the pure water flux of the ZIF-8/PPS fiber membranes were 72.5°, 52.3%, and 12,351 L/h·m², respectively. More importantly, the separation efficiency of M10 was 97%, and the oil/water separation efficiency reached 95% after 14 cycles. This study provides a novel strategy for preparing MOFs/fiber materials for oil/water separation in harsh environments.

Membranes for Oil/Water Separation: A Review

Recent advancements in separation and membrane technologies have shown a great potential in removing oil from wastewaters effectively. In addition, the capabilities have improved to fabricate membranes with tunable properties in terms of their wettability, permeability, antifouling, and mechanical properties that govern the treatment of oily wastewaters. Herein, authors have critically reviewed the literature on membrane technology for oil/water separation with a specific focus on: 1) membrane properties and characterization, 2) development of various materials (e.g., organic, inorganic, and hybrid membranes, and innovative materials), 3) membranes design (e.g., mixed matrix nanocomposite and multilayers), and 4) membrane fabrication techniques and surface modification techniques. The current challenges and future research directions in materials and fabrication techniques for membrane technology applications in oil/water separation are also highlighted. Thus, this review provides helpful guidance toward finding more effective, practical, and scalable solutions to tackle environmental pollution by oils.

Introducing Polar Groups in Porous Aromatic Framework for Achieving High Capacity of Organic Molecules and Enhanced Self-Cleaning Applications

Due to the frequent oil/organic solvent leakage, efficient oil/water separation has attracted extensive concern. However, conventional porous materials possess nonpolar building units, which reveal relatively weak affinity for polar organic molecules. Here, two different polarities of superhydrophobic porous aromatic frameworks (PAFs) were synthesized with respective orthoposition and paraposition C=O groups in the PAF linkers. The conjugated structure formed by a large number of alkynyl and benzene ring structures enabled porous and superhydrophobic quality of PAFs. After the successful preparation of the PAF solids, PAF powders were coated on polyester fabrics by a simple dip-coating method, which endowed the resulting polyester fabrics with superhydrophobicity, porosity, and excellent stability. Based on the unique structure, the oil/water separation efficiency of two superhydrophobic flexible fabrics was more than 90% for various organic solvents. Polar LNU-26 PAF showed better separation performance for the polar oils. This work takes the lead in adopting the polar groups as building units for the preparation of porous networks, which has great guiding significance for the construction of advanced oil/water separation materials.

2D Nano-Mica Sheets Assembled Membranes for High-Efficiency Oil/Water Separation

Oil-polluted water has become one of the most important environmental concerns nowadays due to the increasing industrial oily wastewater and frequent oil spill accidents. Herein, a novel two-dimensional (2D) nano-mica sheets assembled composite membrane with underwater super-oleophobic properties was developed for effective oil/water separation. A 2D nano-mica sheet was synthesized by a facile solvent-assisted ultrasonic exfoliation and then the obtained 2D nano-mica sheets were co-deposited with dopamine on polyvinylidene fluoride substrate to prepare nano-mica composite membranes (NCM). The NCM is hydrophilic in air and super-oleophobic underwater (the water contact angle in the air is 37.6°, and the oil contact angle in water is 151.4°). Furthermore, the prepared NCM provided outstanding stability in different acid-base environments (pH = 1-11). Noteworthily, the oil removal rate is higher than 99.5% as the sodium dodecyl sulfate SDS-stabilized oil (soya-bean oil, mineral oil and pump oil) -in-water emulsions. Meanwhile, the NCM showed excellent reusability, as the oil removal efficiency kept at 99.0% after ten soya-bean oil-in-water or mineral oil-in-water emulsion filtration cycles. The present work paved a new way for developing a low-cost and environmentally friendly strategy for oily wastewater treatment and developed a high-increment utilization application field for natural minerals.

A multifunctional composite membrane with photocatalytic, self-cleaning, oil/water separation and antibacterial properties

Multifunctional composite materials have attracted wide attention because they can be applied in many fields, and have great potential for application. The superhydrophobic surface has been favored by scientists in recent years because of its excellent properties. In this paper, carbon fabric (CF) with high porosity, good electrical conductivity and excellent flexibility was selected as substrate. The CF/Zr-TiO₂/PDMS composites were prepared by solvo-thermal method on CF and modified by PDMS, which can be used in the fields of self-cleaning, self-healing, oil/water separation, antibacterial, anti-icing and so on. Furthermore, the PDMS modification has no or negligible adverse effect on the important textile physical properties of the CF. The effects of different process parameters on the structure and properties of CF/Zr-TiO₂were studied, and the samples with the best conditions were obtained. The results show that the sample achieves the transformation from superhydrophilic to superhydrophobic after modification. The CF/Zr-TiO₂/PDMS composite structure not only shows excellent photocatalytic activity, but also has a certain self-cleaning ability. The samples before and after modification can separate light oil/water and heavy oil/water respectively. Compared with CF/Zr-TiO₂, CF/Zr-TiO₂/PDMS has better anti-Escherichia coliability.

Synthesis of Superhydrophobic Cellulose Stearoyl Ester for Oil/Water Separation

Developing fluorine-free superhydrophobic and biodegradable materials for oil/water separation has already become an irresistible trend. In this paper, we designed two biopolymer oil/water separation routes based on cellulose stearoyl ester (CSE), which was obtained via the acylation reaction between dissolving pulp and stearoyl chloride homogeneously. The CSE showed a superhydrophobic property, which could selectively adsorb oil from the oil/water mixture. Additionally, the CSE was emulsified with an oxidized starch (OS) solution, and the resulting latex was used to impregnate commercial, filter base paper, finally obtaining a hydrophobic and oleophilic membrane. The SEM revealed the membrane had hierarchical micro/nanostructures, while the water contact angle indicated the low surface energy of the membrane, all of which were attributed to the CSE. The membrane had high strength and long durability due to the addition of OS/CSE, and the separation efficiency was more than 99% even after ten repeated uses.

A Self-Detecting and Self-Cleaning Biomimetic Porous Metal-Based Hydrogel for Oil/Water Separation

Porous materials with super-wetting surfaces (superhydrophilic/underwater superoleophobic) are ideal for oil/water separation. However, the inability to monitor the pollution degree and self-cleaning during the separation process limits their application in industrial production. In this study, a porous metal-based hydrogel is proposed, inspired by the porous structure of wood. Porous copper foam with nano-Cu(OH)₂ is used as the skeleton, and its surface is coated with a polyvinyl alcohol, tannic acid, and multiwalled carbon nanotube cross-linked hydrogel coating. The hydrogel has superhydrophilicity and excellent oil/water separation efficiency (>99%) and can adapt to various environments. This approach can also realize hydrogel pollution degree self-detection according to the change in the electrical signal generated during the oil/water separation process, and the hydrogel can also be recovered by soaking to realize self-cleaning. This study will provide new insights into the application of oil/water separation materials in practical industrial manufacturing.

Easy, Fast, Selective, and Simultaneous Separation of Hg(II) and Oil via Loofah-Sponge-Inspired Hierarchically Porous Membranes

In this work, Cu2Se/Cu membranes (CSMs) of hierarchical pores were fabricated via chemical dissolution of Cu and Se followed by redeposition of cuprous selenide (Cu2Se) on copper membranes (CMs), and applied for adsorption/removal/separation of Hg(II) among a variety of interfering metal ions. The CSM demonstrates the best comprehensive performance among previous Hg(II) adsorption membranes, having high selectivity (KHg/M = 2.9 × 104-3.0 × 105), high efficiency (>99%, 5 s to 3 min), high adsorption capacity (505 mg/g), and high flux (2.0 × 106 L m-2 h-1). Meanwhile, effects of Hg(II) concentration, flow rate, and the number of membrane layers and adsorption cycles were also investigated on the removal of Hg(II). Moreover, a Cu2Se/Cu membrane-plasma (CSM-p) with superhydrophilicity/underwater superoleophobicity was prepared on the basis of CSM, and simultaneous removal of Hg(II) and oil was realized by using CSM and CSM-p in combination. This work not only provides a new reference for design of highly selective, efficient metal ion adsorption/enrichment/separation materials but also presents a novel approach to the removal/enrichment/separation of multiple complex contaminants by the combination of different functional membranes.

Facile Preparation of Hydrophobic PLA/PBE Micro-Nanofiber Fabrics via the Melt-Blown Process for High-Efficacy Oil/Water Separation

Polylactic acid (PLA) micro-nanofiber fabrics with a large specific surface area and excellent biodegradability are commonly used in oil/water separation; however, challenges remain due to their poor mechanical properties. Herein, a thermoplastic polylactic acid/propylene-based elastomer (PLA/PBE) polymer was prepared by blending PLA with PBE. Then, PLA/PBE micro-nanofiber fabrics were successfully prepared using a melt-blown process. The results show that the PLA/PBE micro-nanofiber fabric has a three-dimensional porous structure, improving the thermal stability and fluidity of the PLA/PBE blended polymers. The PLA/PBE micro-nanofiber fabric demonstrated a significantly reduced average fiber diameter and an enhanced breaking strength. Moreover, the water contact angle of the prepared samples is 134°, which suggests a hydrophobic capacity. The oil absorption rate of the fabric can reach 10.34, demonstrating excellent oil/water separation performance. The successful preparation of PLA/PBE micro-nanofiber fabrics using our new method paves the way for the large-scale production of promising candidates for high-efficacy oil/water separation applications.

Poly(ethylene-co-vinyl alcohol) Electrospun Nanofiber Membranes for Gravity-Driven Oil/Water Separation

Fabrication of highly efficient oil/water separation membranes is attractive and challenging work for the actual application of the membranes in the treatment of oily wastewater and cleaning up oil spills/oil leakage accidents. In this study, hydrophilic poly(ethylene-co-polyvinyl alcohol) (EVOH) nanofiber membranes were made using an electrospinning technique for oil/water separation. The as-prepared EVOH electrospun nanofiber membranes (ENMs) exhibited a super-hydrophilic property (water contact angle 33.74°) without further treatment. As prepared, ENMs can provide continuous separation of surfactant-free and surfactant-stabilized water-in-oil emulsions with high efficiency (i.e., flux 8200 L m−2 h−1 (LMH), separation efficiency: >99.9%). In addition, their high stability (i.e., reusable, mechanically robust) would broaden the conditions under which they can be employed in the real field oil/water separation applications. Various characterization techniques (including morphology investigation, pore size, porosity, mechanical properties, and performance test) for gravity-driven oil/water separation were employed to evaluate the newly prepared EVOH ENMs.

A Simple Approach to Fabricate Composite Ceramic Membranes Decorated with Functionalized Carbide-Derived Carbon for Oily Wastewater Treatment

Membrane-based oil−water separation has shown huge potential as a remedy to challenge oily wastewater with ease and low energy consumption compared to conventional purification techniques. A set of new composite ceramic membranes was fabricated to separate surfactant-stabilized oil/water (O/W) emulsion. Carbide-derived carbon (CDC) was functionalized by 3-aminopropyltriethoxy silane (APTES) and subsequently deposited on a ceramic alumina support and impregnated with piperazine as an additional amine. The APTES functionalized CDC-loaded membrane was then crosslinked using terephthalyol chloride (TPC). Different loadings of functionalized CDC (50 mg, 100 mg and 200 mg) were employed on the ceramic support resulting in three versions of ceramic membranes (M-50, M-100 and M-200). The fabricated membranes were thoroughly characterized by Scanning electron microscopy (SEM), X-ray diffraction (XRD), Attenuated total teflectance Fourier transform infrared (ATR-FTIR) spectroscopy, Energy dispersive x-ray spectroscopy (EDX) and elemental mapping. The highest permeate flux of 76.05 LMH (L m−2 h−1) at 1 bar using 67.5 ppm oil-in-water emulsion (as feed) was achieved by the M-50 membrane, while an oil separation efficiency of >99% was achieved by using the M-200 membrane. The tested emulsions and their respective permeates were also characterized by optical microscopy to validate the O/W separation performance of the best membrane (M-100). The effect of feed concentration and pressure on permeate flux and oil−water separation efficiency was also studied. A long-term stability test revealed that the M-100 membrane retained its performance for 720 min of continuous operation with a minor decrease in permeate flux, but the O/W separation efficiency remained intact.

Constructing Environmental-Friendly "Oil-Diode" Janus Membrane for Oil/Water Separation

Oil leakage is a global environmental issue and happens frequently, resulting in a waste of oil resources and even threatening the safety of marine creatures and humans. Because of unidirectional oil transportation performance, "oil-diode" Janus membranes have attracted lots of attention for oil/water separation. However, the hydrophobic side of traditional "oil-diode" Janus membrane is completely hydrophobic, resulting in an easy permeation of oil, which hampers light oil recycling. Herein, we provide a facile approach to develop "oil-diode" Janus membranes with the special wettable structure for fast oil refining. The material characteristics and surface wettability of the membranes that generate superimposed efforts are vital to fabricate "oil-diode" Janus membranes. Interestingly, the manufactured membranes exhibit extra-high oil intrusion pressure up to 12 kPa and present high permeance of about 2993 L m^-2 h^-1 bar^-1 in separating stable water-in-oil emulsion containing surfactant and separation efficiency up to 99.6%, thereby showing promising potential in oil recovery and refining.