Stimuli-Responsive Transformable Supramolecular Nanotubes

Supramolecular nanotubes produced by self-assembly of organic molecules can have unique structural features such as a one-dimensional morphology with no branching, distinguishable inner and outer surfaces and membrane walls, or a structure that is hollow and has a high aspect ratio. Incorporation of functional groups that respond to external chemical or physical stimuli into the constituent organic molecules of supramolecular nanotubes allows us to drastically change the structure of the nanotubes by applying such stimuli. This ability affords an array of controllable approaches for the encapsulation, storage, and release of guest compounds, which is expected to be useful in the fields of physics, chemistry, biology, and medicine. In this article, I review the supramolecular nanotubes developed by our group that exhibit morphological transformations in response to pH, chemical reaction, light, temperature, or moisture.

Programmed Stimuli-Responsive Carbon Dot-Nanogel Hybrids for Imaging-Guided Enhanced Tumor Phototherapy

For harmonizing the contradiction of nanotheranostic agents between enhanced tumor accumulation and penetration, efficient cell internalization and fast elimination are key tactics for promoting their clinical applications. Herein, programmed stimuli-responsive poly(N-isopropylacrylamide)-carbon dot (PNIPAM-CD) hybrid nanogels are designed to address the abovementioned conflicts. The enlarged particle size of PNIPAM-CDs enables one to effectively improve their accumulation at tumor sites. Once the hybrid nanogels are docked in tumors and exposed to deep-red-light (660 nm) irradiation, heat and reactive oxygen species (ROS) are generated from the CDs, consequently activating photothermal therapy (PTT) and photodynamic therapy (PDT) effects and meanwhile inducing partial degradation of PNIPAM-CDs for deep tissue penetration. Further, enhanced cellular internalization of the functional components can be achieved owing to the pH-responsive charge reversal and temperature-dependent hydrophilic/hydrophobic conversion characteristics of PNIPAM-CDs. Finally, the overexpressed glutathione (GSH) in tumor cells would trigger further cleavage of the partially degraded hybrid nanogels, which is beneficial for their rapid clearance from the body. This work not only proposed a novel strategy to fabricate nanotheranostic agents using just a single functional component (i.e., the versatile CDs) to simplify the preparation process but also achieved effective delivery of agents into tumor cells by overcoming the multiple biological barriers to enhance therapeutic efficacy and decrease side effects.

Liquid Crystal Elastomer Twist Fibers toward Rotating Microengines

Untethered twist fibers do not require end-anchoring structures to hold their twist orientation and offer simple designs and convenient operation. The reversible responsiveness of these fibers allows them to generate torque and rotational deformation continuously upon the application of external stimuli. The fibers therefore have potential in rotating microengines. In practical applications, high torque and rotational deformation are desirable to meet work capacity requirements. However, the simultaneous endowment of reversible responsiveness and high rotational performance to untethered twist fibers remains a challenge. In this study, a liquid crystal elastomer twist fiber (LCETF) is designed and developed with a fixed twisting alignment of mesogens to provide untethered and reversible responsiveness. Outstanding rotational performance can be achieved when the mesogenic orientation is disrupted through heat triggering. Owing to the significant intrinsic contractile ratio of the LCE material, the rotational deformation of the LCETF can reach 243.6° mm^-1 . More importantly, the specific torque can reach 10.1 N m kg^-1 , which exceeds previously reported values. In addition, the LCETF can be exploited in a rotating microengine to convert heat into electricity with an induction voltage as high as 9.4 V. This work broadens the applications of LCEs for energy harvesters, micromachines, and soft robots.

The Intracellular and Extracellular Microenvironment of Tumor Site: The Trigger of Stimuli-Responsive Drug Delivery Systems

The tumor microenvironment (TME), including intracellular and extracellular microenvironment, contains many biochemical indicators (such as acidity/alkalinity, oxygen content, and enzymatic activity) that are different from the normal physiological environment. These abnormal biochemical indicators can accelerate the heterogeneity of tumors, but on the other hand, they also provide opportunities for the design of intelligent drug delivery systems (DDSs). The TME-responsive DDSs have shown great potential in reducing the side effects of chemotherapy and improving the curative effect of tumors. In this review, the abnormal biochemical indicators of TME are introduced in detail from both the extracellular and intracellular aspects. In view of the various physiological barriers encountered during drug delivery, the strategy of constructing TME-responsive DDSs is discussed. By summarizing the typical research progress, the authors prospect the development of TME-responsive DDS in the future.

Enhanced Biological Imaging via Aggregation-Induced Emission Active Porous Organic Cages

Porous organic cages (POCs) have many advantages, including superior microenvironments, good monodispersity, and shape homogeneity, excellent molecular solubility, high chemical stability, and intriguing host-guest chemistry. These properties enable POCs to overcome the limitations of extended porous networks such as metal-organic frameworks (MOFs) and covalent organic frameworks (COFs). However, the applications of POCs in bioimaging remain limited due to the problems associated with their rigid and hydrophobic structures, thus leading to strong aggregation-caused quenching (ACQ) in aqueous biological media. To address this challenge, we report the preparation of aggregation-induced emission (AIE)-active POCs capable of stimuli responsiveness for enhanced bioimaging. We rationally design a hydrophilic, structurally flexible tetraphenylethylene (TPE)-based POC that is almost entirely soluble in aqueous solutions. This POC's conformationally flexible superstructure allows the dynamic rotation of the TPE-based phenyl rings, thus endowing impressive AIE characteristics for responses to environmental changes such as temperature and viscosity. We employ these notable features in the bioimaging of living cells and obtain good performance, demonstrating that the present AIE-active POCs are suitable candidates for further biological applications.

Four-Dimensional Stimuli-Responsive Hydrogels Micro-Structured via Femtosecond Laser Additive Manufacturing

Rapid fabricating and harnessing stimuli-responsive behaviors of microscale bio-compatible hydrogels are of great interest to the emerging micro-mechanics, drug delivery, artificial scaffolds, nano-robotics, and lab chips. Herein, we demonstrate a novel femtosecond laser additive manufacturing process with smart materials for soft interactive hydrogel micro-machines. Bio-compatible hyaluronic acid methacryloyl was polymerized with hydrophilic diacrylate into an absorbent hydrogel matrix under a tight topological control through a 532 nm green femtosecond laser beam. The proposed hetero-scanning strategy modifies the hierarchical polymeric degrees inside the hydrogel matrix, leading to a controllable surface tension mismatch. Strikingly, these programmable stimuli-responsive matrices mechanized hydrogels into robotic applications at the micro/nanoscale (<300 × 300 × 100 μm³). Reverse high-freedom shape mutations of diversified microstructures were created from simple initial shapes and identified without evident fatigue. We further confirmed the biocompatibility, cell adhesion, and tunable mechanics of the as-prepared hydrogels. Benefiting from the high-efficiency two-photon polymerization (TPP), nanometer feature size (<200 nm), and flexible digitalized modeling technique, many more micro/nanoscale hydrogel robots or machines have become obtainable in respect of future interdisciplinary applications.

Stimuli-Responsive Drug Delivery of Doxorubicin Using Magnetic Nanoparticle Conjugated Poly(ethylene glycol)-g-Chitosan Copolymer

Stimuli-responsive nanoparticles are regarded as an ideal candidate for anticancer drug targeting. We synthesized glutathione (GSH) and magnetic-sensitive nanocomposites for a dual-targeting strategy. To achieve this goal, methoxy poly (ethylene glycol) (MePEG) was grafted to water-soluble chitosan (abbreviated as ChitoPEG). Then doxorubicin (DOX) was conjugated to the backbone of chitosan via disulfide linkage. Iron oxide (IO) magnetic nanoparticles were also conjugated to the backbone of chitosan to provide magnetic sensitivity. In morphological observation, images from a transmission electron microscope (TEM) showed that IO nanoparticles were embedded in the ChitoPEG/DOX/IO nanocomposites. In a drug release study, GSH addition accelerated DOX release rate from nanocomposites, indicating that nanocomposites have redox-responsiveness. Furthermore, external magnetic stimulus concentrated nanocomposites in the magnetic field and then provided efficient internalization of nanocomposites into cancer cells in cell culture experiments. In an animal study with CT26 cell-bearing mice, nanocomposites showed superior magnetic sensitivity and then preferentially targeted tumor tissues in the field of external magnetic stimulus. Nanocomposites composed of ChitoPEG/DOX/IO nanoparticle conjugates have excellent anticancer drug targeting properties.

Fabrication of Multiresponsive Magnetic Nanocomposite Double-Network Hydrogels for Controlled Release Applications

Nanocomposite double-network hydrogels (ncDN hydrogels) have been demonstrated as promising biomaterials to present several desired properties (e.g., high mechanical strength, stimuli-responsiveness, and local therapy) for biomedicine. Here, a new type of ncDN hydrogels featuring definable microstructures and properties as well as multistimuli responsiveness for controlled release applications is developed. Amine-functionalized iron oxide nanoparticles (IOPs_NH₂ ) are used as nanoparticle cross-linkers to simultaneously connect the dual networks of gelatin (Gel) and polydextran aldehyde (PDA) through hydrogen bonding, electrostatic interactions, and dynamic imine bonds. The pH- and temperature-responsive Gel/PDA/IOP_NH₂ ncDN hydrogels present a fast release profile of proteins at acidic pH and high temperature. Besides, IOP_NH₂ also contributes the magnetic-responsiveness to the ncDN hydrogels, allowing the use of magnetic field to generate heat to facilitate the structural change of hydrogels and the subsequent applications. Taken together, a versatile ncDN hydrogel platform capable of multistimuli responsiveness and local heating for controlled release is developed for advanced biomedical applications.

Brightening up Circularly Polarized Luminescence of Monosubstituted Polyacetylene by Conformation Control: Mechanism, Switching, and Sensing

The first example of luminescent monosubstituted polyacetylenes (mono-PAs) is presented, based on a contracted cis-cisoid polyene backbone. It has an excellent circularly polarized luminescence (CPL) performance with a high dissymmetric factor (up to the order of 10^-1 ). The luminescence stems from the helical cis-cisoid PA backbone, which is tightly fixed by the strong intramolecular hydrogen bonds, thereby reversing the energy order of excited states and enabling an emissive energy dissipation. CPL switches are facilely achieved by the solvent and temperature through reversible conformational transition. By taking advantages of fast response and high sensitivity, the thin film of mono-PAs could be used as a CPL-based probe for quantitative detection of trifluoroacetic acid with a wider linear dynamic range than those of photoluminescence and circular dichroism. This work opens a new avenue to develop novel smart CPL materials through modulating conformational transition.

Metal-Organic Frameworks as a Versatile Materials Platform for Unlocking New Potentials in Biocatalysis

Biocatalysts immobilization with nanomaterials has promoted the development of biocatalysis significantly and made it an indispensable part of catalysis industries nowadays. Metal-organic frameworks (MOFs), constructed from organic linkers and metal ions or clusters, have raised significant interests for biocatalysts immobilization in recent years. The diversity of building units, molecular-scale tunability, and modular synthetic routes of MOFs greatly expand its ability as the host to integrate with biocatalysts. In this review, the general synthetic strategies of MOFs with biocatalysts are first summarized. Then, the recent progress of MOFs as a versatile host for a series of biocatalysts, including natural enzymes, nanozymes, and organism-based biocatalysts, followed by the introduction of MOFs themselves as biocatalysts, is discussed. Furthermore, the stimuli-responsive properties of MOFs themselves or the additional functionalization of protein, polymer, and peptide within/on MOF that enable the biocatalysts with the controllable and tunable behavior are also summarized, which could unlock new potentials in biocatalysis. Finally, a perspective of the upcoming challenges, potential impacts, and future directions of biocatalytic MOFs is provided.

Stimuli-Responsive Deep-Blue Organic Ultralong Phosphorescence with Lifetime over 5 s for Reversible Water-Jet Anti-Counterfeiting Printing

Organic ultralong room temperature phosphorescence (OURTP) materials with photophysical properties sensitive to external stimulus are highly attractive for advanced applications. However, most OURTP molecules are in crystal and OURTP materials with good practicability and stimulus-responsive character are hard to be achieved. Here, we report, for the first time, the highly efficient, ultralong-lived and deep-blue OURTP materials by simply doping boron phosphor into cyanuric acid host. Host-guest OURTP composites with abundant and tunable H-bond network are highly stable in air with ultralong lifetime of 5.08 s at room temperature. They are sensitive to water, which can strength the H-bond network to significantly enhance OURTP quantum yield from 16.1 % to 37.6 %. Anti-counterfeiting paper was easily prepared for water-jet printing; the jet-printed high-resolution OURTP patterns can be easily erased by solvent fuming for another printing/erasing cycle with high reversibility.

Recent Progress on Polysaccharide-Based Hydrogels for Controlled Delivery of Therapeutic Biomolecules

A plethora of applications using polysaccharides have been developed in recent years due to their availability as well as their frequent nontoxicity and biodegradability. These polymers are usually obtained from renewable sources or are byproducts of industrial processes, thus, their use is collaborative in waste management and shows promise for an enhanced sustainable circular economy. Regarding the development of novel delivery systems for biotherapeutics, the potential of polysaccharides is attractive for the previously mentioned properties and also for the possibility of chemical modification of their structures, their ability to form matrixes of diverse architectures and mechanical properties, as well as for their ability to maintain bioactivity following incorporation of the biomolecules into the matrix. Biotherapeutics, such as proteins, growth factors, gene vectors, enzymes, hormones, DNA/RNA, and antibodies are currently in use as major therapeutics in a wide range of pathologies. In the present review, we summarize recent progress in the development of polysaccharide-based hydrogels of diverse nature, alone or in combination with other polymers or drug delivery systems, which have been implemented in the delivery of biotherapeutics in the pharmaceutical and biomedical fields.

Zwitterionic Nanogels and Microgels: An Overview on Their Synthesis and Applications

Zwitterionic polymers by virtue of their unique chemical and physical attributes have attracted researchers in recent years. The simultaneous presence of positive and negative charges in the same repeat unit renders them of various interesting properties such as superhydrophilicity, which has significantly broadened their scope for being used in different applications. Among polyzwitterions of different architectures, micro- and/or nano-gels have started receiving attention only until recently. These 3D cross-linked colloidal structures show peculiar characteristics in context to their solution properties, which are attributable either to the comonomers present or the presence of different electrolytes and biological specimens. In this review, a concise yet detailed account is provided of the different synthetic techniques and application domains of zwitterion-based micro- and/or nanogels that have been explored in recent years. Here, the focus is kept solely on the "polybetaines," which have garnered maximum research interest and remain the extensively studied polyzwitterions in literature. While their vast application potential in the biomedical sector is being detailed here, some other areas of scope such as using them as microreactors for the synthesis of metal nanoparticles or making smart membranes for water-treatment are discussed in this minireview as well.

Self-Foaming Metal-Organic Gels Based on Phytic Acid and Their Mechanical, Moldable, and Load-Bearing Properties

A catalogue of metal-organic gels are synthesized from phytic acid (PA) and a diversity of metal ions (Fe³⁺ , Cr³⁺ , Al³⁺ , Ce³⁺ , Y³⁺ , Co²⁺ , Ni²⁺ , Mn²⁺ , Cu²⁺ , Zn²⁺ , Mg²⁺ ) upon heating at 80 °C. PA-M gels have various morphologies, including irregular granular (PA-Fe, PA-Al, PA-Ce, PA-Cr, PA-Ni, PA-Co), spongy (PA-Y), and hollow tremella-like (PA-Cu) morphologies. Interestingly for PA-Fe-1 : 4 (PA:Fe³⁺ =1 : 4) a large amount of gas is generated during the gelation process leading to a self-foaming gel. The PA-Fe-1 : 4 self-foaming gel shows reversible gel-sol phase transition. The gel is unusually weakened and transformed into a sol at room temperature, and the sol is reversed to gelation when heated again at 80 °C. PA-Fe-1 : 4 gel also shows shapeable and load-bearing properties, and it can bear up to 200 times of its weight, depending on the gas amount fixed in the foam gel and the aging time. This work provides a catalogue of self-foaming supramolecular gels with tunable properties based on naturally abundant resources.

Zeolitic Imidazolate Framework Platform for Combinational Starvation Therapy and Oxygen Self-Sufficient Photodynamic Therapy against a Hypoxia Tumor

The antitumor efficacy of photodynamic therapy (PDT) is greatly impeded by the nonspecific targeting of photosensitizers and limited oxygen supply in hypoxic tumors. Aiming to overcome the problem, a dual-locked porphyrin/enzyme-loading zeolitic imidazolate framework (ZIF) nanoplatform was constructed for starvation therapy and O₂ self-sufficient PDT. The fluorescence recovery and PDT of photosensitizers could be cooperatively triggered by dual pathological parameters, the low pH and overexpressed GSH in tumor tissues, which makes the PDT process conduct precisely in a tumor microenvironment. The cascade catalysis of glucose oxidase and catalase promotes the nanoplatform dissociation, inhibits the energy supply of tumors (starvation therapy), and provides enough O₂ to ameliorate the hypoxia and enhance PDT efficacy. In vitro and in vivo studies were performed to confirm the high antitumor efficacy of the porphyrin/enzyme-loading ZIF nanoplatform. Thus, this work offers a path for precise and efficient PDT-based combination therapy against a hypoxia tumor.

Stimuli-activatable nanomaterials for phototherapy of cancer

Phototherapy including photothermal therapy (PTT) and photodynamic therapy (PDT), as non-invasive therapy approaches, have gained accumulated attention for cancer treatment in past years. PTT and PDT can generate local hyperthermia effects and reactive oxygen species (ROS) respectively, for tumor eradication. To improve the therapeutic performance while minimizing the reverse side effects of phototherapy, extensive efforts have been devoted to developing stimuli-activatable (e.g. pH, redox, ROS, enzyme, etc) nanomaterials for tumor-specific delivery/activation of the phototherapeutics. In this review, we first overviewed the recent advances of the engineered stimuli-responsive nanovectors for the phototherapy of cancer. We particularly summarized the progress of stimuli-activatable nanomaterials-based combinatory therapy strategies for augmenting the performance of phototherapy. We further discuss challenges for the clinical translation of nanomaterials-based phototherapy.

Stimuli-responsive nanocarriers for therapeutic applications in cancer

Cancer has become a very serious challenge with aging of the human population. Advances in nanotechnology have provided new perspectives in the treatment of cancer. Through the combination of nanotechnology and therapeutics, nanomedicine has been successfully used to treat cancer in recent years. In terms of nanomedicine, nanocarriers play a key role in delivering therapeutic agents, reducing severe side effects, simplifying the administration scheme, and improving therapeutic efficacies. Modulations of the structure and function of nanocarriers for improved therapeutic efficacy in cancer have attracted increasing attention in recent years. Stimuli-responsive nanocarriers penetrate deeply into tissues and respond to external or internal stimuli by releasing the therapeutic agent for cancer therapy. Notably, stimuli-responsive nanocarriers reduce the severe side effects of therapeutic agents, when compared with systemic chemotherapy, and achieve controlled drug release at tumor sites. Therefore, the development of stimuli-responsive nanocarriers plays a crucial role in drug delivery for cancer therapy. This article focuses on the development of nanomaterials with stimuli-responsive properties for use as nanocarriers, in the last few decades. These nanocarriers are more effective at delivering the therapeutic agent under the control of external or internal stimuli. Furthermore, nanocarriers with theranostic features have been designed and fabricated to confirm their great potential in achieving effective treatment of cancer, which will provide us with better choices for cancer therapy.

Multi-Component Hydrogel Beads Incorporated with Reduced Graphene Oxide for pH-Responsive and Controlled Co-Delivery of Multiple Agents

The development of combination therapy has received great attention in recent years because of its potential to achieve higher therapeutic efficacy than that achieved by mono-drug therapy. Carriers for effective and stimuli-responsive co-delivery of multiple agents, however, are highly deficient at the moment. To address this need, this study reports the generation of multi-component hydrogel beads incorporated with reduced graphene oxide (rGO). The beads are prepared by incorporating doxorubicin (DOX)-loaded gelatine (GL) microbeads into hydrogel beads containing rGO and 5-fluorouracil (5-FU). rGO-containing beads are shown to be more effective in inhibiting the growth of MCF-7 cells via the induction of reactive oxygen species (ROS) generation. In addition, the drug release sustainability of the beads is affected by the pH of the release medium, with the release rate increasing in neutral pH but decreasing in the acidic environment. Our beads warrant further development as carriers for pH-responsive and controlled co-delivery of multiple agents.

Nanomaterials with Supramolecular Assembly Based on AIE Luminogens for Theranostic Applications

One of the major pursuits of biomedical science is to develop advanced strategies for theranostics, which is expected to be an effective approach for achieving the transition from conventional medicine to precision medicine. Supramolecular assembly can serve as a powerful tool in the development of nanotheranostics with accurate imaging of tumors and real-time monitoring of the therapeutic process upon the incorporation of aggregation-induced emission (AIE) ability. AIE luminogens (AIEgens) will not only enable fluorescence imaging but will also aid in improving the efficacy of therapies. Furthermore, the fluorescent signals and therapeutic performance of these nanomaterials can be manipulated precisely owing to the reversible and stimuli-responsive characteristics of the supramolecular systems. Inspired by rapid advances in this field, recent research conducted on nanotheranostics with the AIE effect based on supramolecular assembly is summarized. Here, three representative strategies for supramolecular nanomaterials are presented as follows: a) supramolecular self-assembly of AIEgens, b) the loading of AIEgens within nanocarriers with supramolecular assembly, and c) supramolecular macrocycle-guided assembly via host-guest interactions. Meanwhile, the diverse applications of such nanomaterials in diagnostics and therapeutics have also been discussed in detail. Finally, the challenges of this field are listed in this review.

Conformation-Dependent Phosphorescence of Galactose-Decorated Phosphors and Assembling-Induced Phosphorescence Enhancement

Amorphous organic room-temperature phosphorescent (RTP) materials are promising for their facile preparation and processability, while the conformation effects of phosphors at amorphous state are lack of study in comparison with the rigid effects due to the commonly irregular assembling and dispersal of phosphors in rigid systems. Herein, we report a series of phosphorescent molecules modified by polyhydroxy galactose, whose RTP emission at the amorphous state can be regulated by controlling the conformational distortion of the phosphorescent segments. Further, a strong RTP emission is facilely obtained by the co-assembling between polyhydroxy phosphors and polyhydroxy matrices (α-CD, β-CD, and chitosan). Owing to the rigid effect of the enhanced hydrogen bonding cross-linking, the highest RTP quantum yield reaches 19.4%; whereas, the RTP emissions of assemblies become conformation insensitive. The conflicting relationship between the conformation effect and rigid effect is attributed to the differences between aggregated single-component systems and dispersed assembling systems. Besides, the unique and different moisture responsiveness of the co-assembling samples is discovered and further applied in data encryption. The research expands the scope for designing amorphous pure organic RTP materials with supramolecular strategies and shows a modularized approach for assembling-enhanced phosphorescence.

Solid-State Low-Temperature Thermoresponsive and Reversible Color Changes of Conjugated Polymer in Layered Structure: Beyond Infrared Thermography

Emergence of thermoresponsive and reversible color changes at low temperature is a challenging target. In general, it is not easy to induce sufficient dynamic motion of rigid molecules including chromophore at a lower temperature. The present work shows unusually low-temperature color-change properties originating from the dynamic motion of rigid conjugated polymer in solid state. The layered composites of polydiacetylene (PDA) and guest l-arginine (L-Arg) (PDA-(L-Arg)) exhibit temperature-responsive gradual color changes with reversibility in the range of 123-333 K in solid crystalline state. The dynamic properties are induced by gradual and reversible distortion of the π-conjugated main chain in response to temperature. The tuned flexibility of the layered structure facilitates motion of the rigid π-conjugated molecule at low temperature. The PDA-(L-Arg)-coated substrates are applied to visualization and quantification of 2D and 3D temperature distributions generated by cooling with liquid nitrogen. These thermographic devices afford to image lower temperature range than typical infrared thermography. The present work indicates potentials of layered architectures with tunable flexibility for emergence of dynamic properties.

Nanoscale element behavior in a continuum

Patterns in materials are not just decoration but also important for function. In view of this, the dynamics of patterning procedures in materials has been investigated as an important developmental procedure. In this study, nanoscale components in a continuum are traced in terms of natural patterning procedures. Externally applied compressive or extensive forces to an elastic thin sheet commonly induce an orientated lateral line pattern. From a nanoscale element point of view, the dynamics of natural arrangements, forming anisotropic patterns in preference to isotropy, still remains unclear. In this study, new developmental procedures for line patterns are suggested by stimuli-responsive viscoelastic nanocomposite network model systems. Forces originating from an internal source without directional orientation generate lines in preference to isotropic patterns. With repeated, non-oriented (or isotropic) and self-modulated strain variations, stress is accumulated to drive anisotropic orientations and further lines. The anisotropic elemental arrangement is justified by the equilibrium between the short-range attraction and long-range repulsion from a bottom-up viewpoint. This study suggests a new material design methodology that is useful for electrical devices, biomedical devices and other patterned soft condensed matter in conjunction with line patterns typically generated in a broad range of viscoelastic materials.

Plasma Treatment of Polymer Powder as an Effective Tool to Functionalize Polymers: Case Study Application on an Amphiphilic Polyurethane

Plasma treatment is a widely applied, easy, fast, and highly reproducible surface modification technique. In this work powder plasma treatment was exploited to expose carboxylic groups along the backbone of a water soluble polymer. Specifically, a custom-made amphiphilic poly(ether urethane) containing Poloxamer® 407 blocks (Mw = 54,000 Da) was first synthesized and its powders were plasma treated in the presence of Acrylic Acid vapor. To maximize -COOH group exposure while preventing polymer degradation, different Ar gas flow rates (i.e., 10, 30, and 50 sccm) were investigated. Upon gas flow increase, significant polymer degradation was observed, with a 35% molecular weight reduction at 50 sccm Ar flow rate. On the other hand, the highest number of exposed carboxylic groups (5.3 × 1018 ± 5.5 × 1017 units/gpolymer) was obtained by setting gas flow at 10 sccm. Hence, a gas flow of 10 sccm turned out to be the best set-up to maximize -COOH exposure while preventing degradation phenomena. Additionally, upon plasma treatment, no detrimental effects were observed in the thermoresponsiveness of polymer aqueous solutions, which was ensured by Poloxamer® 407 blocks. Therefore, the newly developed technology here applied on an amphiphilic poly(ether urethane) could pave the way to the tailored design of a plethora of different multifunctional hydrogels.

Compression-Responsive Photonic Crystals Based on Fluorine-Containing Polymers

Fluoropolymers represent a unique class of functional polymers due to their various interesting and important properties such as thermal stability, resistance toward chemicals, repellent behaviors, and their low refractive indices in comparison to other polymeric materials. Based on the latter optical property, fluoropolymers are particularly of interest for the preparation of photonic crystals for optical sensing application. Within the present study, photonic crystals were prepared based on core-interlayer-shell particles focusing on fluoropolymers. For particle assembly, the melt-shear organization technique was applied. The high order and refractive index contrast of the individual components of the colloidal crystal structure lead to remarkable reflection colors according to Bragg’s law of diffraction. Due to the special architecture of the particles, consisting of a soft core, a comparably hard interlayer, and again a soft shell, the resulting opal films were capable of changing their shape and domain sizes upon applied pressure, which was accompanied with a (reversible) change of the observed reflection colors as well. By the incorporation of adjustable amounts of UV cross-linking agents into the opal film and subsequent treatment with different UV irradiation times, stable and pressure-sensitive opal films were obtained. It is shown that the present strategy led to (i) pressure-sensitive opal films featuring reversibly switchable reflection colors and (ii) that opal films can be prepared, for which the written pattern—resulting from the compressed particles—could be fixed upon subsequent irradiation with UV light. The herein described novel fluoropolymer-containing photonic crystals, with their pressure-tunable reflection color, are promising candidates in the field of sensing devices and as potential candidates for anti-counterfeiting materials.

Fabrication Of Dual pH/redox-Responsive Lipid-Polymer Hybrid Nanoparticles For Anticancer Drug Delivery And Controlled Release

BACKGROUND

The development of biocompatible nanocarriers that can efficiently encapsulate and deliver anticancer drug to the tumor site and provide controlled release of cargos in response to the specific cues for cancer therapy is of great significance.

METHODS

In this work, dual pH/redox-responsive fabrication of hybrid lipid-polymer nanoparticles (LPNPs) self-assembled from amphiphilic polymer poly(ethylene glycol) methyl ether-grafted disulfide-poly(β-amino esters) (PBAE-ss-mPEG) and PEGylated lipid were prepared and used as drug delivery carriers. The optimization of PEGylated lipid modification was confirmed by analysis of particle size, polydispersity index (PDI), cellular uptake, serum stability, and drug loading capacity. The pK b value of LPNPs was determined as 6.55, indicating the pH-sensitivity. The critical micelle concentration (CMC) values and zeta-potential of LPNPs at different pH values were investigated to confirm its pH-sensitivity. The morphology of LPNPs before and after incubation with reducing agent was imaged to study the redox-responsibility.

RESULTS

The in vitro results showed that the drug had controlled release from LPNPs triggered by low pH and high concentration of reducing agent. Furthermore, the cytotoxicity of LPNPs was very low, and the doxorubicin (DOX)-loaded LPNPs could efficiently induce the death of tumor cells in comparison to free DOX.

CONCLUSION

All results demonstrated that the fabricated LPNPs could be potential anticancer drug delivery carriers with a pH/redox-triggered drug release profile, and PEGylated lipid modification might be a useful method to fabricate the drug delivery platform.