Highly sensitive and simple fluorescence staining of proteins in sodium dodecyl sulfate-polyacrylamide-based gels by using hydrophobic tail-mediated enhancement of fluorescein luminescence

Fluorescein has an extremely low luminescence intensity in acidic aqueous media. However, when it was bound to proteins, subsequent increase of luminescence intensity took place. Furthermore, when a hydrophobic tail, such as aliphatic hydrocarbons, was introduced to fluorescein, more dramatic increase of luminescence intensity was observed upon binding to proteins. In the present study, by utilizing this luminescence enhancement, three hydrophobic fluorescein dyes (5-dodecanoyl amino fluorescein, 5-hexadecanoyl amino fluorescein, and 5-octadecanoyl amino fluorescein) were examined as noncovalent fluorescent stains of protein bands in sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). Effective incorporation of the dyes to proteins in gels was accomplished either simply by adding dyes at the protein fixation step, or by treating gels with a staining solution after the fixation. The sensitivity of this staining method using the fluorescein derivatives was approximately 1 ng/band for most proteins. For some cases, protein bands containing as low as 0.1 ng were successfully visualized. In addition, the detection sensitivity showed much less protein-to-protein variation than silver staining. This new staining method was also successfully applied to two-dimensional electrophoresis of rat brain proteins. Its overall sensitivity was comparable to that of silver staining.

Ultrathin-layer sodium dodecyl sulfate disc electrophoresis of proteins in the range from 10 to 220 kDa in homogeneous, low-concentrated polyacrylamide gels

This study describes an ultrathin-layer sodium dodecyl sulfate (SDS) disc electrophoresis in polyacrylamide gels of a thickness of only 150 microm. By use of 2-amino-2-methyl-1,3-propanediol/glycine instead of traditional Tris/HCl buffer in the resolving phase of the gel, proteins with a wide range of molecular sizes (10 kDa to over 220 kDa) are separated in unusually low-concentrated gels (4%T, 3.3%C). 2-Amino-2-methyl-1,3-propanediol in the resolving part of the gel contributes to stabilization of the pH value at 8.8, while glycine improves destacking as well as separation of small proteins from the bulk of stacked SDS. This method combines both the advantages of conventional slab-gel electrophoresis and capillary gel electrophoresis. It is easy to apply and well suited for all further miniaturization attempts.

A general approach to the analysis of errors and failure modes in the base-calling function in automated fluorescent DNA sequencing

We describe the analysis of errors and failure modes in the base-calling function in automated DNA sequencing, on instruments in which fluorescently-labeled Sanger dideoxy-sequencing ladders are detected via their times of migration past a fixed detector. A general approach entails the joint use of: (i) well-defined control samples such as M13mp18, and (ii) mathematical simulation of sequencing electropherograms, with the deliberate introduction of different types of distortion and noise. An algorithm, the electrophoretic trace simulator (ETS), is used to calculate electrophoresis traces corresponding to the output data stream of an automated fluorescent DNA sequencer. The ETS accepts a user-defined sequence of nucleotide bases (A, C, G, T) as input, and employs user-adjustable functions to compute the following critical parameters of an electropherogram: peak intensity, peak spacing, peak shape as a function of base number; background, noise, and spectral cross-talk correction (for a sequencer using multiple dyes). We use a combination of M13mp18 controls and simulated electropherograms to analyze two problems of considerable practical importance: (i) variation in electrophoretic migration rates between different lanes of a gel, and (ii) variation in signal intensity due to user-dependent loading artifacts. The issue of base-calling errors and failure modes, for electropherograms that contain noise and distortion, is addressed.

Increasing the sensitivity of single-strand conformation polymorphism analysis of the LDLR gene mutations in brazilian patients with familial hypercholesterolemia

Mutations in the low-density lipoprotein receptor (LDLR) gene cause familial hypercholesterolemia (FH), one of the most common single gene disorders. It is thought that FH affects approximately 1 of 500 individuals in most populations. Single-strand conformation polymorphism (SSCP) analysis is widely used to detect mutations in the LDLR gene. However, several factors such as temperature, pH, running time, gel composition and size of the DNA fragments can influence its sensitivity. We have optimized the electrophoretic conditions to screen mutations in the promoter region and exons 1-18 of the LDLR gene by varying temperature (5 degrees C, 8 degrees C, 12 degrees C and 15 degrees C), voltage (300 to 600 V), and running time (1 to 4 hours) in the semi-automated GenePhor system (Amersham Biosciences). The efficiency of the method was evaluated by using 30 positive controls (DNA samples with mutations and polymorphisms in the LDLR gene, previously characterized) and DNA samples from 90 Brazilian patients with FH. Our results show that the use of two temperatures (5 degrees C and 15 degrees C) in combination with other optimized conditions resulted in high mutation detection rate (97%), which was considered appropriate for routine screening. Therefore, this strategy could be useful for the diagnosis of genetic disorders, cancer, and for pharmacogenetic studies.

Ammonium dodecyl sulfate as an alternative to sodium dodecyl sulfate for protein sample preparation with improved performance in MALDI mass spectrometry

Sodium dodecyl sulfate (SDS) is a strong surfactant that is widely used in protein sample preparation. While protein and peptide samples containing up to approximately 1% SDS can be analyzed by matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS) using a two-layer matrix/sample deposition method, the presence of SDS in a protein sample generally degrades mass resolution and mass measurement accuracy. This degradation in performance is found to be related to the formation of sodium-protein adducts in the MALDI process. If the instrument resolving power is insufficient to separate these adduct peaks from the protonated molecular ion peak, peak broadening is observed in the protein molecular ion region, and as a result, the peak centroid shifts to a higher mass. In this work, we present a method using ammonium dodecyl sulfate as a viable alternative to SDS for protein sample preparation with much improved MALDI MS performance. Three non-sodium-based dodecyl sulfate surfactants, ammonium dodecyl sulfate (ADS), hydrogen dodecyl sulfate, and tris(hydroxymethyl)aminomethane dodecyl sulfate were investigated. Of the three surfactants tested, it is found that ADS gives the best performance in MALDI. For proteins with moderate molecular masses (i.e., up to approximately 25 kDa), the presence of ADS in a protein sample does not result in significant degradation in mass resolution and accuracy, and the protonated molecular ion peak is the dominant peak in the MALDI spectrum. The ammonium adduct ions dominate the MALDI spectra when the protein mass exceeds approximately 25 kDa; however, ADS still gives better results than SDS. The behavior of ADS in gel electrophoresis was also investigated. It is shown that cell extracts dissolved in ADS can be separated by normal SDS-polyacrylamide gel electrophoresis by simply mixing them with the SDS sample buffer. The application of ADS as the surfactant for protein solubilization with improved performance in MALDI analysis is demonstrated in the study of a detergent insoluble fraction from a Raji/CD9 B-cell lymphocyte lysate.

Standardization of denaturing gradient gel electrophoresis for mutant screening of influenza A (H3N2) virus samples

Because of the extensive genetic variability of the influenza viruses, new virus mutants arise worldwide. In the human population, some strains may become potentially epidemic after evading the immune response of the host. At present, molecular methods have made it possible to identify these variants. However, if a large number of samples need to be analyzed the identification of randomly mutated nucleotides cannot be achieved by sequencing analysis or restriction fragment length polymorphism (RFLP). In order to improve this process, a denaturing gradient gel electrophoresis (DGGE) protocol capable of discriminating between reference strains representative of different influenza seasons, some mutant strains, and five clinical isolates was standardized Ribonudeic acid (RNA) was isolated and submitted to a one-step RT-PCR that amplified the region codifying for the globular domain of the Haemagglutinin (HA) molecule. The amplicons were analyzed by electrophoresis in 6% polyacrylamide gel at 60 degreeC/150 V for 8 h, using a 31--41% urea--formamide gradient. This method was able to distinguish between closely related nucleotide sequences, confirming its suitability as screening methodology for the analysis of influenza virus epidemiology, by allowing a faster and more extensive evaluation of a large number of the variant strains detected in a specific region of the world.

Effects of high-molecular-mass substrates on protein migration during sodium dodecyl sulfatepolyacrylamide gel electrophoresis

Substrate-sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) has become a popular procedure for the separation and identification of active fractions present in enzyme mixtures due to its relative simplicity. Procedures including high-molecular-mass substrates within the gel, such as starch for identification of amylase activity, and protein substrates, including gelatin, casein, and collagen, for revealing protease activity, have been described. SDS-PAGE separation under denaturing conditions is dependent on the molecular mass of the proteins and on the effective pore size of the gels, the last factor being affected by the inclusion of high-molecular-mass substrates into the polyacrylamide matrix. In order to quantify the effect of the addition of increasing concentrations of such substrates on protein migration, starch, gelatin, and casein were included in gels in which polyacrylamide concentration was kept constant. High-molecular-mass substrates decreased migration of proteins ranging from 6.5 to 205 kDa, although the migration pattern, and thereby the accuracy of the assignation of relative molecular masses to proteins separated on those gels, was practically unaffected. The substitution of glycine, as the carrying ion, by Tricine in denaturing electrophoresis buffer systems resulted in an improvement of the migration of proteins in substrate-containing gels. Results suggested that zymograms including substrates remain a valuable procedure for the separation and the relative molecular mass assignation of active enzyme fractions.

Evaluation of peptide electropherograms by multivariate mathematical-statistical methods. I. Principal component analysis

Depository effects in slowly metabolised proteins, typically glycation or the estimation of products arising from the reaction of unsaturated long-chain-fatty acid metabolites (possessing aldehydic groups) are very difficult to assess owing to their extremely low concentration in the protein matrix. In order to reveal such alterations we applied deep enzymatic fragmentation resulting in a set of small peptides, which, if modified, are likely to change their electrophoretic properties and can be visualised on the resulting profile. Peptide maps of collagen (a mixture of collagen types I and III digested by bacterial collagenase) were applied as the model protein structure for detecting the nonenzymatic posttranslational changes originating during various physiological conditions like high fructose diet and hypertriglyceridemic state. Capillary electrophoresis in acidic media (sodium phosphate buffer, pH 2.5) was used as the separation method capable of (partial) separation of over 60 peptide peaks. Two to 13 changes were revealed in the profiles obtained reflecting the physiological conditions of the animals tested. Combination of peptide profiling with subsequent t-test evaluation of individual peak areas and principal component analysis based on cumulative peak areas of individual sections of the electropherograms allowed to determine in which section (part) of the electropherogram the physiological state indicating changes occurred. Simultaneously it was possible to reveal the qualitative differences between the four physiological regimes investigated (i.e., which regime affects the collagen molecules most and which affects them least). The approach can be used as guidance for targeted preseparation of the very complex peptide mixture.

Improvement of base-calling in multilane automated DNA sequencing by use of electrophoretic calibration standards, data linearization, and trace alignment

We present a new method for the linearization and alignment of data traces generated by multilane automated DNA sequencing instruments. Application of this method to data generated with the Visible Genetics Open Gene DNA sequencing system (using MicroCel 700 gel cassettes, with a 25 cm separation distance) allows read lengths of > 1,000 nucleotides to be routinely obtained with high confidence and > 97% accuracy. This represents an increase of 10-15% in average read length, relative to data from this system that have not been processed in the fashion described herein. Most importantly, the linearization and alignment method allows usable sequence to be obtained from a fraction of 10-15% of data sets which, because of original trace misalignment problems, would otherwise have to be discarded. Our method involves adding electrophoretic calibration standards to the DNA sequencing fragments. The calibration standards are labeled with a dye that differs spectrally from the dye attached to the sequencing fragments. The calibration standards are identical in all the lanes. Analysis of the mobilities of the calibration standards allows correction for both systematic and random variation of electrophoretic properties between gel lanes. We have successfully used this method with two-dye and three-dye DNA sequencing instruments.

RIKEN integrated sequence analysis (RISA) system--384-format sequencing pipeline with 384 multicapillary sequencer

The RIKEN high-throughput 384-format sequencing pipeline (RISA system) including a 384-multicapillary sequencer (the so-called RISA sequencer) was developed for the RIKEN mouse encyclopedia project. The RISA system consists of colony picking, template preparation, sequencing reaction, and the sequencing process. A novel high-throughput 384-format capillary sequencer system (RISA sequencer system) was developed for the sequencing process. This system consists of a 384-multicapillary auto sequencer (RISA sequencer), a 384-multicapillary array assembler (CAS), and a 384-multicapillary casting device. The RISA sequencer can simultaneously analyze 384 independent sequencing products. The optical system is a scanning system chosen after careful comparison with an image detection system for the simultaneous detection of the 384-capillary array. This scanning system can be used with any fluorescent-labeled sequencing reaction (chain termination reaction), including transcriptional sequencing based on RNA polymerase, which was originally developed by us, and cycle sequencing based on thermostable DNA polymerase. For long-read sequencing, 380 out of 384 sequences (99.2%) were successfully analyzed and the average read length, with more than 99% accuracy, was 654.4 bp. A single RISA sequencer can analyze 216 kb with >99% accuracy in 2.7 h (90 kb/h). For short-read sequencing to cluster the 3' end and 5' end sequencing by reading 350 bp, 384 samples can be analyzed in 1.5 h. We have also developed a RISA inoculator, RISA filtrator and densitometer, RISA plasmid preparator which can handle throughput of 40,000 samples in 17.5 h, and a high-throughput RISA thermal cycler which has four 384-well sites. The combination of these technologies allowed us to construct the RISA system consisting of 16 RISA sequencers, which can process 50,000 DNA samples per day. One haploid genome shotgun sequence of a higher organism, such as human, mouse, rat, domestic animals, and plants, can be revealed by seven RISA systems within one month.

Urine protein analysis by gel electrophoresis and laser densitometry after chemotherapy in pediatric cancer patients

A common side effect of chemotherapy is reversible or nonreversible nephrotoxicity. SDS polyacrylamide gel electrophoresis combined with laser densitometry was evaluated as a suitable method to analyze pathologic urine proteins. A total of 52 pediatric patients were followed during and 63 patients were followed after therapy. During therapy renal damage was recorded in 43% of the leukemia patients, in 56% of nephroblastoma patients, and 75% of patients with other tumors. Three or more months after therapy pathologic patterns were seen in 25% of acute lymphoblastic leukemia patients, in 35% of patients with nephroblastoma, and in 62% of other patients. Patients with persistent complete tubular proteinuria and mixed glomerular/tubular proteinuria were found to have a high risk for irreversible renal damage and should be controlled periodically. This method permits a rapid and reliable analysis of urine proteins and is suitable for follow-up tests of renal function during and after chemotherapy.

SDS-electrophoresis of unconcentrated urine samples using a semi-automatic method

The study of urinary proteins is an important tool in the screening and diagnosis of patients with renal impairment. Quantification of total proteins, although useful, can provide only limited information. Gel electrophoresis of urine samples may provide more detailed information.

Preparative application of commercial automated gel electrophoresis apparatus to subcellular-sized particles: sequential isolations, fractions re-run, sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis, yield and purity

The analytical and preparative potential of automated gel electrophoresis apparatus with intermittent fluorescence scanning of the migration path, the HPGE-1000 apparatus (LabIntelligence, Belmont, CA) was further developed in application to subcellular-sized particles. Resolution between two rat liver microsome components in agarose (MetaPhor) gel electrophoresis was found to increase with decreasing agarose concentration to 0.04%. It was less, even in an agarose solution at that low concentration, than that in laterally aggregated 4% polyacrylamide gel. The three components of the microsomal preparation were sequentially isolated from 0.6 and 0.8% agarose gel electropherograms. One fraction when re-electrophoresed was found to exhibit the original mobility and did not give rise to the other components. Yields of each component were near-quantitative after one or two electroelution steps. Based on protein content, no impurities could be detected in two of the microsome fractions; the third fraction contained 2% of nonmicrosome impurity. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) patterns of all three microsome fractions were indistinguishable from one another and from that of the unfractionated microsome preparation.

Standardization of procedures of Plasmodium falciparum antigen preparation for serologic tests

The objective of the present study is to standardize the technical variables for preparation and storage of Plasmodium falciparum and of antigen components extracted with the amphoteric detergent Zwittergent. P. falciparum obtained from in vitro culture was stored at different temperatures and for different periods of time. For each variable, antigen components of the parasite were extracted in the presence or absence of protease inhibitors and submitted or not to later dialysis. Products were stored for 15, 30 and 60 days at different temperatures and immunological activity of each extract was determined by SDS-PAGE and ELISA using positive or negative standard sera for the presence of IgG directed to blood stage antigens of P. falciparum. Antigen extracts obtained from parasites stored at -20 degrees C up to 10 days or at -70 degrees C for 2 months presented the best results, showing well-defined bands on SDS-PAGE and Western blots and presenting absorbance values in ELISA that permitted safe differentiation between positive and negative sera.

Standardization and clinical management of lipoprotein(a) measurements

The present article proposes personal suggestions to improve determinations and clinical interpretation of results of lipoprotein(a) assays. Methods and procedures for sampling and quantification of the various isoforms of lipoprotein(a) in serum, plasma and urine are reviewed with the aim of improving the reliability and reproducibility of results and reinforcing the clinical utility of lipoprotein(a) measurements.

High-efficiency blotting of proteins of diverse sizes following sodium dodecyl sulfate-polyacrylamide gel electrophoresis

High-molecular-weight proteins often blot onto nitrocellulose membranes poorly following sodium dodecyl sulfate-polyacrylamide gel electrophoresis, resulting in low levels of detection on immunoblots, and hence difficulty in analyzing rare proteins. Moreover, optimizing conditions for the transfer of high-molecular-weight proteins to nitrocellulose frequently results in the inefficient transfer or loss of lower molecular weight proteins. This problem is particularly vexing during the analysis of large proteins which may be processed to one or more smaller biologically active forms. Using radiolabeled protein standards and phosphorimaging technology, we have quantitated the efficacy of many different protein gel electrophoresis and blotting protocols. Here we report novel gel and blotting conditions which significantly improve the transfer and retention of high-molecular-weight proteins, without sacrificing the efficient transfer of lower molecular weight proteins. Using this newly described procedure, we have detected a rare 500-kDa protein in immunoblots which was previously not detectable with any of the commonly used blotting procedures. Since the improved conditions offer increased sensitivity across a spectrum of protein sizes, they should be widely applicable.

Development and standardization of solid phase assays for the detection of anti-neutrophil cytoplasmic antibodies (ANCA). A report on the second phase of an international cooperative study on the standardization of ANCA assays

Anti-neutrophil cytoplasmic antibodies (ANCA) are diagnostic markers for systemic vasculitis. They are classically detected by an indirect immunofluorescence test using normal donor neutrophils as substrate. This assay lacks antigenic specificity and is not quantitative. The 'EC/BCR Project for ANCA Assay Standardization' is an international collaboration study with the aim to develop and standardize solid phase assays for ANCA detection. In this part of the study the isolation and characterization of proteinase-3 and myeloperoxidase, the two main target molecules for ANCA, and the development and standardization of ELISAs with these antigens are described. Six laboratories successfully isolated purified proteinase-3 preparations that could be used. Three of these preparations, together with one myeloperoxidase preparation, were subsequently used for ANCA testing by ELISA. The ELISA technique was standardized in two rounds of testing in the 14 participating laboratories. The coefficient of variation of these new assays decreased from values of approx. 50% in the first round to approx. 20% in the second round. We conclude that purified proteinase-3 and myeloperoxidase can be used in standardized ELISAs for ANCA detection. Whether such procedures offer advantages over the IIF test will be determined in a prospective clinical study.

Subtyping of Bacillus cereus by total cell protein patterns and arbitrary primer polymerase chain reaction

Bacillus cereus is a ubiquitous sporeforming Gram-positive rod that is associated with foodborne outbreaks as well as several opportunistic infections. Inspite of the prevalence of B. cereus associated foodborne outbreaks, subtyping of the species using molecular typing assays was not attempted. In this study we have recovered 58 B. cereus isolates from natural and clinical sources and initially characterized them, along with a B. cereus strain (ATCC 14579) and B. thuringiensis natural isolate, by biotyping, antibiotic susceptibility testing, and SDS-PAGE of total cell proteins. Our data have shown the existence of 1 biotype, 3 anti-biograms and 22 (38%) total cell protein patterns among the 58 B. cereus isolates. B. thuringiensis had a different protein pattern. SDS-PAGE of total cell proteins data denote clonal heterogeneity within B. cereus. Protein pattern 4 (pp4) was the most predominant with 13 isolates of B. cereus showing this pattern. Eight out of the 13 isolates with pp4 and one B. cereus strain (ATCC 14579) were further subtyped by using the arbitrary primer polymerase chain reaction (AP-PCR) assay. Eight (88.8%) different PCR patterns out of the 9 B. cereus isolates were obtained. Patterns obtained by SDS-PAGE of total cell proteins and AP-PCR were reproducible. These results indicate that SDS-PAGE of total cell proteins allows the differentiation among species within Bacillus and of strains within B. cereus. The typability of the method was 100% and the simpson's discrimination index of diversity was 98%. The utility of SDS-PAGE of total cell proteins in a pilot epidemiologic study was assessed and results obtained demonstrate its typing potential. AP-PCR allows further subtyping of the species. Both methods if used in conjunction may be useful for further clinical and epidemiologic studies of the spectrum of diseases caused by B. cereus.

DNAOPT: a computer program to aid optimization of DNA gel electrophoresis and SDS-PAGE

Several methods and computer programs have been developed for estimating the size of DNA fragments from gel electrophoresis. However, methods are lacking that may facilitate in optimization of gel conditions. In this article, a computer program called DNAOPT is described, which was developed to assist researchers in tuning the gel conditions of gel electrophoresis. The DNAOPT program fits the reciprocal of the migration distance vs. the size of the DNA fragments using the hyperbolic regression method and computes the hyperbolic parameters such as signal, flatness and capacity (optimization parameters). The program further manipulates these parameters obtained by running gel electrophoresis under various conditions (i) to determine the relationship between the gel conditions (temperature, buffer concentration, electric field strength, etc.) and optimization parameters; (ii) to demonstrate gel electrophoresis curves and optimization parameters graphically; and (iii) to represent the optimizing parameters at different gel conditions in tabular form. The above-mentioned program options aid the users in selecting optimum gel conditions by running the gel repeatedly under various conditions in which the agarose concentration, electric field strength, temperature, buffer concentration and so on are varied in a systematic way for each set of gel conditions. Similarly, this program can also be used to optimize gel conditions of sodium dodecyl sulfate polyacrylamide gel electrophoresis.

Multiple fluorescence-based PCR-SSCP analysis

Multiple fluorescence-based polymerase chain reaction single-strand conformation polymorphism (MF-PCR-SSCP) was developed. The target sequence was amplified by PCR using forward and reverse primers labeled with two different fluorescent dyes at their 5' ends. The amplified products were then heat-denatured, mixed with internal standard DNA markers labeled with a third fluorescent dye and applied to a temperature-controlled gel in an automated DNA sequencer, with a gel-temperature-controlling system. Mutations were detected as positional shifts of two-colored peaks in the electrophoretogram. The image data were analyzed by the computer program GENESCAN 672. The peak positions were standardized to internal DNA size markers. MF-PCR-SSCP analysis of 7 human tumor cell lines with 7 different single base mutations of the human K-ras oncogene detected all mutations even under the same electrophoresis conditions. Complete loss of heterozygosity was detected in two cell lines simultaneously. A gel temperature at 20 degrees C and polyacrylamide concentration of 10% gave the best separation. MF-PCR-SSCP is superior to the current PCR-SSCP in several ways: it does not involve radioactivity, migration patterns are standardized to internal standard DNA markers, there is a strict temperature-controlling system and the higher percentage of the gel enables better separation with resultant 100% detection of mutations most likely under one set of electrophoresis conditions.

Our obsession with high resolution in gel electrophoresis: does it necessarily give the right answer?

Poor resolution of protein zones in an electrophoretic pattern may not necessarily be the result of poor technique. The example is given of the 'streak material', extracted from wheat flour, now recognised to be aggregated subunits of glutenin. The size distribution of the aggregated glutenin 'streak' is the key to elucidating the functional properties of wheaten dough. A stepped-layer gel technique has been devised to quantitate the proportions of aggregated glutenin in specific size groupings.

Electrophoretic artifacts arising from the use of thiol-containing reagents

Thiol reagents migrate as a curtain behind the salt front when loaded with the sample solution onto disc-electrophoresis gels. In immobilized pH gradients (IPG) the same compounds are driven by electrophoresis and electroosmosis from the alkaline to the neutral and acidic regions of the gradients. In either case, a dose-dependent sideways spreading results in spurious reduction between adjacent lanes if samples with and without reducing agent are loaded side by side.

Preliminary treatment of urinary proteins improves electrophoretic analysis and immunodetection

Analysis of urinary protein composition is an important tool in studies on renal physiology and physiopathology. Urine is, however, a complex mixture containing, besides protein, a variety of compounds such as salts, peptides, oligosaccharides, and glycosaminoglycans. Some of these compounds interfere with the electrophoretic migration of protein in sodium dodecyl sulfate-polyacrylamide gels and prevent correct analysis of the protein pattern. We describe a simple method for extracting urinary proteins that considerably improves their electrophoretic migration and subsequent immunodetection. This treatment involves ammonium sulfate fractionations (for precipitating proteins), EDTA (for inhibiting protein aggregation), and HCl hydrolysis (for removing glycosylaminoglycans). Recovery during extraction was found to be almost quantitative for total protein and three representative proteins: albumin, alpha 1-glycoprotein acid, and beta 2-microglobulin.

pMCT 118 (D1S80): a new allelic ladder and an improved electrophoretic separation lead to the demonstration of 28 alleles

Population data studies carried out on caucasians from Northwest Germany (n = 218) using the AMPFLP system pMCT 118 (D1S80). The method used in a previous study (Rand et al. 1992) for pMCT 118 could be improved by increasing the electrophoretic separation length from 10 to 20 cm and by using an extended allelic ladder which allowed the distinction of 8 additional alleles (a total of 28 alleles). Out of the 8 additional alleles 5 could be differentiated which differed within the 16 bp repeat sequence. The allele frequencies found were compared to population data from American caucasians, Hispanics and black Americans (Eisenberg and Maha 1991). All populations with the exception or black Americans, showed good agreement.